Numbers 2.3 file opens in Numbers 3.0 with some formulas replaced by values

Have others seen this effect? If so please post the expression that wouldn't import.
The formula that imported as a value here is:
=IF(ROW()-1<=MAX(TimeLog::D), INDEX(TimeLog, MATCH(ROW()-1, TimeLog::D), 2), "")
Maybe we can find a common element.
Thanks,
Jerry

I haven't noticed that values substitution case, but I have noticed that you can no longer reference an entire table in INDEX by just using the table name. Formerly you could write =INDEX(Data, 2,2) to reference Data :: B2.
Now you would write =INDEX(Data::A:B,2,2), or =INDEX(Data::B, 1,2)
Jerry

Similar Messages

SP2013 and Project 2013 - project files open in read-only mode with no options to edit only Save As

Hi all,
Environment:
SharePoint 2013 (15.0.4420.1017) RTM
Windows 8 - Project 2013 (15.0.4433.1506) 32Bit
Issue details:
When opening .mpp files stored within SharePoint they are opened successfully within Project 2013 however they are opened in Read-Only mode with no options to edit/check out only Save As. The
same outcome is experienced if you click the document link within SharePoint or you chose to edit from the document menu.
Opening the file through windows explorer also opens only in read-only mode.
To date we’ve tested the following
Windows 7 – Office 2010 = working as expected
Windows 8 – Office 2010 = working as expected
Windows 7 – Office 2013 = opening as read only, no prompt to edit
Windows 8 – Office 2013 – opening as read only, no prompt to edit
Current thinking is that it is an issue with either the SharePoint Office Documents Class ActiveX control or Project 2013 itself interacting with SharePoint 2013.
We have tested this in multiple SP2013 environments with the same outcomes.
The workaround therefore is to save locally and then upload again which is not ideal.
Unable to find an exact issue match to this.
Any help with this appreciated.

Hi Dan,
For us after investigating this further it was found that using the document menu to edit or checkout and then edit results in the project file being opened in read-only mode.
The same issue was present for Visio files.
Using the FILES ribbon menu results in the document being opened in edit mode successfully in both Project and Visio.
Please note that we found that this issue only exists within document libraries where checkout is required to edit which was our case. If checkout is not required the document
menu can also be used as expected.
Cheers,
Dan

I want to buy a Canon 6D but will its raw files open in my Photoshop CS6 with camera raw version 8.5.0.236

I want to buy a Canon 6D but will its raw files open in my PhotoshopCS6 with camera raw version 8.5.0.236. Does anyone know, please

Camera Raw plug-in | Supported cameras

Getting popups in Firefox every time I open a new tab, usually with some relvance to past browsing content

Some are for Walmart, some are for Best Buy, and lots of others I can't remember exactly what they were. A few seconds after I open a new tab, an audio message will begin to play, followed by a popup window that is a sales pitch.

Do a malware check with some malware scan programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

Files opened are no longer associated with a connection

Sorry if this has been posted before, but I couldn't find any mention of it.
Steps to reproduce the problem:
- open SQLDev
- open a connection
- open a file (using the "Files" tab in the left pane)
Result: the file is not associated with the open connection and you have to manually select it from the drop-down on the top right corner.
Previous versions were working as expected and current behaviour is extremely annoying.
Hope you will fix it ASAP.
Regards.
Alessandro

xxsawer wrote:
Well basicaly I think that any default sticking of a file to a connection is wrong.I disagree. To me default should be the connection(s) currently open.
If you really want to have such feature then it has to be configurable and disabled by default.That sounds more reasonable.
I think that first time you open a file you always have to chose a connection.I strongly disagree.
Consider you would have 10 connections opened and opening a file for the first time. To which connection would you attach the file?ideally SQLDev should ask me to which of the currently open connections I want to pin the file. If that's too much work, I can live with not pinning to any (IOW, as it is now). BUT if only ONE connection is open I want SQLDev to pin any file to that connection, without asking anything (IOW, as it worked before).
To remember to which connection was a file attached, you need to remember the full path to the file and the connection. If you have hunderts or even thousands of files then such log would be pretty big. What if I remove some files from my project? There is no way how you can detect this, so the log will contain dead mappings.I don't want SQLDev to remember anything: I work with CVS/SVN and the same file can be compiled on different connections (DEV, TEST, PROD, etc.). Not sure what are you talking about here...
Basicaly I don't understand why need this functionality? You need to attach a file to a connection only when you need to compile it. When I am programing something I usually have only few souces open (e.g. three packages). I doubt anybody opens and changes large number of packages. Are you doing some changes to entire system every day?I don't understand how the number of files should make any difference. You open three packages, fine: don't you need to compile the changes you make? I just don't want to be forced to choose the connection if that can be automated (and, BTW, how many connections do you have? I have hundreds: do you think it's fun scrolling through a list that long?).
Regards.
Alessandro

Excel 2010; Two file opened in a single instance with two different windows... Is it possible?

Hello
I'm using Excel 2010
I need to open a new Excel file to be display on a 2' monitor. The new file need to be under the same instance has my main Excel file to prevent problem with a special dll collection that I'm using.
I need to have both file in a separate window
Is it possible?
Excuse my English
Martin

Hi Martin,
Open two excel file in one excel instance, display them to different windows.
Please try the methods listed in the thread below:
http://social.technet.microsoft.com/Forums/en-US/6ba32569-19a0-4b45-806f-9a42258bdb5f/how-to-open-two-excel-files-in-multiple-monitors-in-windows-7?forum=excel
Best Regards,
Wind

File opens in Reader, but prints with Acrobat

Hi
If I double click on a PDF file it opens in Reader.
If I right click it and select 'print' it will attempt to print using Adobe Acrobat 5.
I think Adobe Acrobat 5 is required for some old systems my company uses.
How can I change default behaviour on my machine so that right-click print is done through Reader and not Acrobat?

In Run type regedit and open following registry path(Second part may differ from machine to machine):
HKEY_USERS\S-1-5-21-762979615-2031575299-929701000-XXXXXX\Software\Microsoft\Windows\Curre ntVersion\Explorer\FileExts\.pdf
On the Right panel ,right click and Add "String Value" by the name "Application" and then Modify(Right Click) this "Application" and add Value data as the name of application by which you want open pdf file.Eg. If you want to make Acrobat as your default application ,put Acrobat.exe or put AcroRd32.exe if you want Reader as your default app. Similarly put the name of corresponding .exe for other pdf Readers you have and you want to make a particular as your default app.For knowing the name of exe of other Readers, just check in “OpenWithList” just below .pdf(on left).
I hope it can solve your problem

File open/save dialog causes SPOD with 10.10.3

Just updated to 10.10.3 from 10.10.2 using the combo updater (after hearing stories of people being hosed by the normal updater and having success once the combo was applied).
Now, however, I find that whenever any application needs to open or save a file, and the directory selected in the dialog has a LOT of files (like 10K files), I get a SPOD (spinning pinwheel of death) for minutes. MINUTES. This never happened on any previous iteration of any MacOS. This is on a MBP late-2013 with 16GB of RAM and a SSD.
Already repaired permissions. Checked the filesystem with Disk Utility. It's OK.
This is really debilitating.
I have a saved process sample output from Safari while it was in SPOD mode with the file dialog open. I can upload this if would be interesting to anyone. NOTE: just attempting to save this sample trace from within Activity Monitor caused that application to SPOD while it was asking me where to save the sample output.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Open in Photoshop CS5 errors with "Some of the application Components are Missing...

After doing a migration from one mac to another mac with the Migration Assistant, when I try to edit a lightroom file with the Open In CS5 I get a dialog that comes up "Some of the application Components are Missing from the Application directory, Please reinstall the application.
Well I have reinstalled photoshop, actually uninstalled it first, the reinstalled twice...once with "keep preferences" and once without. I have also run the Adobe Upgrader and everything is up to date. Lightroom is up to date.
Any ideas??

Since you can open a photo in CS5 when selecting <Open anyway>, I would also think that this is a problem of Lr.
When you select <Render using Lightroom> Lr creates the PSD (or TIFF) and sends it to CS5.
So it seems that this part of Lr that is creating a PSD (or TIFF) from your Raw image is missing / broken.
Most probably something got left behind when you used the Migration Assistant.
I would suggest this: Download from Adobe's website the trial version of Lr 4.3. The trial version is a full version with all features enabled, but it runs only for 30 days.
Each time you open the trial version you get the option <I want to buy>. Select this option and enter your serial number. This will unlock the trial version for unlimited use.
Maybe it would be good to un-install your current Lr before re-installing the downloaded file to ensure that you do a "clean" re-installation.

Why does Firefox open in a new window with some sites? I hate this.

In some instances, a new browser opens with my homepage when typing in certain websites. I didn't have this problem before upgrading to 7. I hate this.

That are probably JavaScript window.open() calls that specify window dimensions.
You can divert those to a new tab.
* http://kb.mozillazine.org/browser.link.open_newwindow.restriction (0)
* http://kb.mozillazine.org/browser.link.open_newwindow (3)

PDF file opens in a browser window.

I am creating a page in Dreamweaver that has a bunch of links that contain animations. The animations were created first in Powerpoint then saved as a PDF file so the user would still be able to perform the animations yet keep them from being copied.
When you click on the link to the PDF file the file opens in a web browser with the browser menu bar and I cannot see the PDF menu bar at the top like "FILE, EDIT, VIEW, DOCUMENT, COMMENTS, etc.
How do I get the file to open and still be able to use the menu bar at the top?
Thanks for your help.
Pat

You can't control that, it is determined by the visitors browser configuration and whether or not they have a PDF browser plugin. In your case, it sounds like you don't have the Adobe PDF plugin for the browser you are using. You might want to try reinstalling Adobe again. This shouldn't be a problem for most visitors. What browser are you using?

How to determine who has a PDF file open?

I generate a daily report in PDF format and place the file on a shared server. The problem arises when I attempt to delete the file (in order to replace with the new version) and someone has the file open. I end up with two versions of file on she share drive. The only way to determine which is the current file is due to the date I place at the end of the file name.
Is there a way to determine who has the file open? This would eliminate confusion amongst my peers.
Thank you.

This is not a feature of Acrobat. You may be able to look at the server logs.

How to highlight searched words in pdf file opens from web??

Hello fellows
I need to create a web page that holds couple controls include "search" button .When client clicks on the button the programm will search pdf file, open it in client reader with highlight on searched words ..
Is that any posibility to do it using javascript on a client or c# ,vb.net on the server ??
I'm very novice in PDF developing so any ideas or conclusions would be very usefull!

Thank you for answer
But maybe you have any idea how I can do it??
This is very important feature for our project.
Some additional information : our project will hosted in SharePoint 2007
When I use adobe Ifilter for moss and set in querystring #search="searchword" I get highlights, but only in a browser.
But if a reader was configured to open client application this feature wasn't work.
Any suggestion ???

Can I change the default location for File, Open?

When I click on File, Open in CS2 (it came with the computer) Pictures is always the Library that opens. Can this be changed? I have created a Library called Photography. That is where I download and store my photographs and where I work on them.

As an alternative to futzing with Photoshop's File - Open dialog, you could try to change your workflow a bit and browse to your photo folders with Bridge or Explorer, then dragging photos to a Photoshop shortcut (icon on desktop). You can, of course, set up Windows Explorer shortcuts to open to anywhere you want.
Going one further, I suggest against using the Windows "Libraries" feature entirely - it's just an abstraction, and it's always been a bit buggy. Just create folders on your hard drive to work from instead. Everything works better done that way.
-Noel

Error Received MAC Mavericks with CS5.1... FILE.OPEN will not work

I was just told CS5.1 is no longer supported by Adobe chat and to use this venu, so here it goes.
1) Operating System: MAC 10.9 Mavericks
2) Photoshop Version: 5.1
3) Problem:
      * FILE>OPEN selection from the dropdown menu in the upper left Task Bar of the Graphical User Interface will not work.
   - Problem Description:
      * Selecting FILE>OPEN presents an error box with the message "Could not complete your request because of a program error."
4) Trouble Shooting:
   - Fully reinstalled photoshop.
   - Fully updated photoshop.
   - Updated the computers version of Java (Java 7 Update 45).
   - Adjusted the security settings for the operating system.
5) Misc Information
   - I just purchased this Photoshop and registered with it a week ago.
What can I do?

Known problem with Mavericks. In view deselect CoverFlow option for say List.

Numbers 2.3 file opens in Numbers 3.0 with some formulas replaced by values

Similar Messages

Maybe you are looking for