Numbers 3.0 doesn't work

Hello,
I just upgraded to Numbers 3.0. However, now when I try to launch numbers from the dock, I get a menu list of my numbers docs. When I click on one that was already created using numbers 3.0, I get an error message telling me that the file can only be opened using the new numbers and that I should install the upgrade.
But, I've confirmed that I've already isntalled the new Numbers 3.0. I've restarted the computer several times and no luck.
Any advice?
Thanks
Orest

Just guessing, but the old Numbers is still on your machine and maybe that's the one that's open on your dock. I run them both at the same time and the icons are similar.
Numbers '09 is on the bottom in the image, Numbers 3.0 on the top.
SG

Similar Messages

Numbers lock key doesn't work!

hello again,
the numbers lock key lights up when clicked, but it doesn't work at all... any idea why this might be?
this is a MBP not even one year old...
thank you very, very much for your help!

thank you so much for your suggestions...
saddly, it won't work... i don't see why...
actually just now when i tried it as you said, it 'froze' the system for a few seconds...

Trial serial number doesn't work.

Just downloaded a trial of Aperture 3.0.3, and got emailed the serial number.
Click to install, enter my name and the supplied serial number, but the installer just says "The serial number you entered is not valid." and will not proceed.
I've double and triple checked, the number is exactly as per the email, with upper case, no confusion between letters and numbers, but it doesn't work.
Any ideas?

Thanks.
Any suggestions how to contact them? There's no contact details on the email, and the email is from a "no-reply" address, and searching on their Support section brought me to here - 's why I thought I'd ask here

Ipone 4s display suddenly doesn't work any more. i can't even unlock it as it put the numbers itself. and if i am lucky to unlock it opens apps and does everything whenever my finger comes near without even touching it. can anyone help?

ipone 4s display suddenly doesn't work any more. most of the time i can't even unlock my iphone as it puts the numbers itself. and if i am lucky to unlock it opens apps and does everything else whenever my finger comes near the display without even touching it. I did reset and also updated my operating system. But the problem stills shows up... can anyone help please?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Don't want to use new Numbers, but 'get info' fix doesn't work

Hi All,
I made the mistake of installing the new Numbers a month or two ago. I don't want to use the new Numbers because I need to work on the same documents on older machines that won't work with the new Numbers. On my machines with both versions of Numbers, I want to be able to just double-click on the documents and open with the older version. The usual fix is to use get info on a document, select the app I want to use for this type of document and then hit 'change all' for that type of doc. Well that's the theory at least. I've found that this setting doesn't stick in this case. (I've never seen this not work). It still opens with the new Numbers.
I've tried removing Numbers, but Software Update keeps nagging that there is an update available jfor Numbers, and wants to reinstall it. They 'dumbed down' Software Update so that you can't remove updates you don't want to be bothered by. (I hate it that Apple continually removes features, then adds them back in a year or two!) So I'm stuck.
Any one else have this happen? Any fixes?
Thanks!

Using Get Info to change all documents to open with Pages 4.3 doesn't work. The Mac OS will always default to the newest installed version & has for as long as I can remember. It will work on individual files, but that could be a lot of files to reset.
This is what worked for me. After I installed the new iWork updates I created a folder on an external drive & named it "Applications." I then moved the new iWork apps to this folder & renamed the applications Keynote 6, Pages 5 & Numbers 3. I have icons for two versions of Pages & Numbers (I rarely use Keynote) in my Dock. Even with two versions of Pages & Numbers running, double-clicking an existing file opens in Pages 4.3 or Numbers 2.3. This should also keep the Mac App Store from nagging you to update.
Since the last update I've used the solution Peter Breis posted (4th post in that thread) in iWork Tips 'n' Tricks with a little "tweak."
Making Numbers '09 the default whilst keeping Pages 5
1. Move any new iWork apps in another clearly labelled folder (I created a new folder in Applications & named it iWork 13)
2. Menu > Apple > System Preferences > Spotlight > Privacy > drag the above folder into the list
2) Move the new iWork folder into the trash (temporarily)
3) Select any Numbers file in Finder > Menu > Info (cmd+i) > Open with: > Pages '09 > Change all
4) Re the new iWork folder from the trash (right-click > Put back)
Pages 5 should no longer appear as a default App, and you won't have to keep a copy in a separate drive or dmg.
IMPORTANT: Make a note of where and how Pages was installed for the next App Store update and temporarily move it back there before putting it away again in the folder concealed from Spotlight.

My external Apple USB Keyboard letters doesn't work, but the numbers do. Why and how can I fix this issue?

My external Apple USB Keyboard letters doesn't work, but the numbers do. Why and how can I fix this issue? Also, When I open the Keyboard Viewer, the letters will highlight only if I hold the modifier key(s) "Control" or "Control and Option". I really need help with this. I don't have any other computer to try it on, so I will have to test it on a friends computer sometime. But perhaps solutions that I can try right now? Thanks.

Hello there, IDuncan23.
The following Knowledge Base article has some great troubleshooting steps you can follow to work on resolving your keyboard issue:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Thanks for reaching Apple Support Communities.
Cheers,
Pedro D.

HT1296 When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

The music sync is one way - computer to iphone. The only exception is itunes purchases. File>Transfer Purchases
It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to move everything to your new computer.

Numbers 3.2 has changed too much, it doesn't work with my project anymore. How do I revert back to the previous version I was using?

Numbers 3.2 has changed too much, it doesn't work with my project anymore. 1) The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming), 2) I used to be able to duplicate a folder within my sheet panel window by simply clicking on a folder and hitting Command D, but that doesn't work now so it looks like I'll have to spend even more time to recreate the same tables that used to be easily duplicated, and 3) I can't choose fill colors that matched my project anymore because there are only limited choices available now. And these are only the changes that I'm aware of. I am very disappointed and frustrated. Whatever the motivation was to limit Numbers 3.2, I want the previous version back. How do I revert back to the previous version I was using?

The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming),
You can scroll more quickly between sheets if you don't use the left-right triangles, but instead move the cursor up into the bands with the "tabs" and drag right or left.
Also, if you have a lot if sheets for which you want a quick vertical list, then you can try the following have something like this pop up (showing your sheet names automatically) whenever you hit a keyboard shortcut (in my case shift-command-j):
This is done via a Jump to Sheet Automator Service (Dropbox download). To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
This will cause a new item to appear in your Numbers > Services menu. Then, if you want a keyboard shortcut, go here in System Preferences and add one:
You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
This particular service jumps to the first cell of the first table of the sheet you choose from an automatically generated list of all sheets in the current document.
SG

IWork(Keynote, pages and numbers) doesn't work well about the issue of copy & paste problem

I think so, too. the Keynote 6.5 is not working well on Yosemite (Mac OS X 10.10.1).
In my case, I can't copy & paste from some program(particularly analysis program in my case) to Keynote.
So, when I check coping & pasting the graph or image and so on to Powerpoint and other programs (one of Office is such word and 3rd programs), It works well. However It doesn't work at Keynote, page and numbers.
Also, I tried to do the following process to solve this issue
======
Something is wrong with your installation of Keynote
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote by using AppDelete.
2 restart the Mac;   Apple menu > restart
3 immediately after the start chime, press the shift key until you see the Apple symbol.
         let it fully boot up, it will take longer as the OS is repairing the drive
4 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and      click repair disc permissions
5 when complete, restart the Mac normally
6 install Keynote from the Mac App Store
====
It doesn't work! Anything doesn't change.
In conclusion, I didn't solve this yet!
Plz, solve this problem or fix it!.

This is a double posting, please only post in one discussion at a time.
Keynote 6.5 is stable and reliable under Yosemite for most users.
As with all new operating systems and applications, a small number of users find a few problems.
Copy and pasting text from and into Keynote from all the applications I have, work perfectly: the applications include; Safari, Mail, Word, PowerPoint, excel, Pages, Numbers, iMovie, Photoshop, InDesign, Illustrator.
If you want to place graphics into Keynote, use one of the following methods:
Insert > Coose
click the media button on an image placehoder
click the media button on the tool bar
drag and drop from a Finder window
Copy and pasting images into Keynote is not supported

Could somebody teach me how to set the lastest iTunes so that it repeats just one of the numbers installed from the CD? I've alreadly tried it by clicking "control" and the bottom, but it doesn't work. Thank you.

Could somebody teach me how to set the latest iTunes so that it repeats just one of the numbers installed from the CD?
I've already given it a try by clicking "control" and the bottom item which means one item in Japanese, but it doesn't work.
Thank you.

You can access the repeat options if you right-click on the shuffle icon or if menus are enabled you can use
Controls > Repeat > Off | All | One.
Once the control is visible you can click it to switch between states as before. If the control is turned to off it disappears on the next track change. In contrast the shuffle control remains visible whenever it is appropriate. Hopefully the next release will fix this.
The bottom one should do it.
tt2

Hello. I recently updated numbers on my macbook pro. I like the auto completion feature (proposing te word as I type). With this new update, I cannot see this feature and it doesn't work automatically. Can I have any help on this issue ?

Hello. I recently updated numbers on my macbook pro. I like the auto completion feature (proposing te word as I type). With this new update, I cannot see this feature and it doesn't work automatically. Can I have any help on this issue ?

This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl

Ctrl + numbers switch between spaces doesn't work in lion

After a fresh install of Lion I'veexperienced strange behavior in mission control. I copied all my apps,documents, settings, etc. from SL to Lion but I noticed something different in Lion. Before I changed spaces by using ctrl+number-keys but for some reasonthis doesn’t work in Lion for me. It does nothing. When I hold down ctrl anduse the arrow-key it scrolls to the next space with a smooth animation. Afterthis and still holding the ctrl-key and pressing a number-key (3 for instance)it does jump to that space with a faster animation. But after releasing thectrl-key and trying it again without any arrow keys involved it doesn’t work atall. Is there anyone hew is experiencing the same problem? Anyone with a possibleexplanation or a way to solve this issue? I’m wondering if this has somethingto do with the clean install because my father did an upgrade from SL to Lionand ctrl+number-keys to switch between spaces works fine for him.
Thanks in advance,
Pindakaas023

pindakaas023 wrote:
Anyone with a possibleexplanation or a way to solve this issue?
Go to the Keyboard preference pane -> Keyboard Shortcuts -> Mission Control and check to see if you have the ^ + number keys set.

After installing: pages in inverted colors | numbers doesn't work

I've installed iWorks 08 on my MacBook Pro 2.8GHz but it doesn't work properly. The colours are wrongly presented. A kind of inverted.
I cannot work with these settings. If you prit it comes out ok.
But while working everything is white, white, white...
Does anyone know this error?
All the best,
Martin

When did you install Pages08? Recently? You have to update iWork08 to latest version. Pages is in version 3.0.3. Use the Software Update check or for Pages this link [http://support.apple.com/kb/DL808]
Which version of Snow Leopard do you have? You state 10.6. The other day version 10.6.4 was released. Download the Combo version from here [http://support.apple.com/kb/DL1048]

DVI to Video adapter doesn´t work! HELP!

I bought a dvi to video adapter (RCA or SVideo) and I already tried on two diferent TVs and none of them worked? What should I do? Does it have a setup to do?

We really need some more details to be able to help with your situation.
Is the adapter an Apple one, or some other brand?
What model TVs do you have? Please be as specific with the model numbers as possible.
When you say it doesn't work, what exactly happens?
And finally: what kind of Mac do you have? You posted in the Mac Mini forum, but your signature says MacBook.
If it is a Mac Mini, did you set it up initially using a regular monitor first?

Numbers 3.0 doesn't work

Similar Messages

Maybe you are looking for