Numbers 3.2 still deletes page headers

Number 3.2 still removes page headers from spreadsheets created in N'09 (2.3) and previous versions upon opening. I have submitted three bug reports about this since Numbers 3.0 but this continues to happen. I see that you can add header rows finally (which I think of as different from page headers). But to do that I need to open a spreadsheet in 09, copy the headers, open the spreadsheet in 3.2, add header rows, paste in my headers, reformat as necessary. Doable but a pain if you have a lot of spreadsheets. Why don't the exisiting spreadsheets open in the 3.0+ Numbers with the same content they had in 09? Am I missing something? I have discussed this on the forums before so I don't think I am. This seems like a true design flaw to me.  I can submit examples of this.
I am on an iMac running 10.9.2 and Numbers 3.2.
Thanks in advance for any replies.
Susan

As I was converting one of my spreadsheets from N'09 to N'3.2 and adding those header rows I spoke about and copying and pasting I stopped and sent the post above. Then I went back and continued with that process. When I  did a quick print to PDF to see how the formatting would look, there on the pdf was my freaking header, (now doubled because I added the header rows etc)! So it appears that at least in 3.2 the headers are not removed, they are moved and not visable until printed. Perhaps this is new to 3.2 I don't know. The Help system does not mention it when you search on headers and footer. It only talks of spreadsheet headers and footers. But there is a vague mention of it in a document called Print a Spreadsheet. I haven't investigated anything about it yet but I wanted to reply to my own postso that no one would waste their time answering me. Also hopefully some of the many other people who were having this problem before will see my answer and save themselves some trouble.

Similar Messages

  • NUMBERS: How do I delete pages within a sheet?

    Using NUMBERS:  HOW DO I DELETE PAGES WITHIN A 'SHEET' ?

    You may want to try posting this question over in the Numbers forum, here.

  • I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

    I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

    Hi Crushed,
    Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
    Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
    Regards,
    Ian.

  • Pages crashes when opening any document on iPad 3 Latest version.   I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create anew document or open a document it just cr

    Pages crashes when opening any document on iPad 3 Latest version. I tried everything I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create a new document or open a document it just crashes out.

    Try this:
    Make sure IOS is updated to latest version
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings

  • Adding page headers and footers to Numbers 3.0 document

    I have not found any way to add page headers or footers to a Numbers 3.0 spreadsheet document.  Searching online help file did not yield solution.  Anyone have any ideas?

    Hi Ruzicka,
    Page headers and footers, alas, are not supported in Numbers 3.0.  According to this support document they will be introduced to Numbers 3 sometime over the next six months.
    Meanwhile, I understand you can paste tables into Pages and print from there.
    SG

  • What happened to page headers and footers in the new version of Numbers?

    Just downloaded the update to Numbers. Where did the Show Layout  with page headers and footers go?

    They are somewhere on the cutting room floor at the Apple app factory.
    Send Feedback to Apple via the Numbers menu.
    Jerry

  • How do I delete pages on a sheet in Numbers?

    How do I delete pages on a sheet in Numbers? I have 6 pages, and only need 2.

    "Totally unintuitive" is often a way of saying "not the way I've become accustomed to."
    In the Numbers Help menu, you will see "Numbers '09 User Guide." Choosing this item downloads a searchable PDF file containing the guide—a much better and easier to use resource than the indexed, but not fully searchable Help files.
    Numbers uses a model sufficiently different from "what you've been accustomed to" that I'd recommend reading at least the first two (or three) chapters straight through. The rest of the guide can be left to read on an 'as needed' basis.
    You'll also find a link to the iWork formulas and functions User Guide in the Help menu. If you're going to write formulas in your spreadsheets, you'll want to download that as well, and keet it available as a reference guide.
    Regards,
    Barry
    PS: I found this particular aspect of Numbers (what you see on the screen is what you get, but you can scale it to fit on fewer—or more—pages if you want) a fairly 'intuitive' (read: 'familiar') concept, since I'd been using the similar 'resize' feature with copy machines to make copied originals fit the page size to which I was copying them for as long as it has been available.
    B.

  • Once I publish my site with a web hosting site can I still edit and update the site in Muse?  Can I add and delete pages to the site?

    Very confused about publishing the Muse site.  It sound like I won't be able to edit a lot of it once it is published.  I need to be able to add and delete pages and edit the content on existing pages over time.  It is saying that the temporary version of the site will delete after 30 days.  Am I misunderstanding?

    It sounds like you didn't upload the css files folder that Muse generates. There is also scripts file, assets file/images file that Muse generates

  • [Help please] Delete page

    Hi,
    I am using InDesign in a quite basic way. Lately I encoutered a problem. When I delete a page my columns and pictures are shifted in a wrong way.
    I added some screenshots to explain what I mean.
    This is how it looks before deleting a page:
    Then I delete page 2:
    And then this is what I get:
    As you can see the right page just gets shifted to the left one. Is there a way to build it that it wil understand that it has to rearange the colums and objects? So when I delete one page that everything rearanges nicely.
    Thank you.

    I think there may be a limited-time trial that would get you through the current project, then you could decide if the investment is worthwhile for the future. Without some sort of plugin I'm afraid you're probably stuck -- that's just the nature of how the program works.
    The other problem with adding/deleting odd numbers of pages is that overridden master items are replaced when a page shift sides, so you now have both the overridden copy (no longer linked to the master page) and the copy that is still on the master. For empty frames you might not notice, but anything with content in it makes a mess. AutoFlow Pro deals with this, as well.

  • I publish a 41mb newsletter monthly into interactive pdf. It always becomes a file size of 4mb, 10% of original, when I save to pdf. This month my newsletter is 41mb and it drops to 11mb, 25% of original. I have re-sized all pictures, deleted pages separa

    I publish a 41mb InDesign newsletter monthly into interactive pdf. It always becomes a file size of 4mb, 10% of original, when I save to pdf. This month my newsletter is 41mb and it drops to 11mb, 25% of original. I have re-sized all pictures, deleted pages separately, have gotten the file size down to 16mb and it drops to 7mb, 45% of original.
    I have gone back and saved Feb and March and it saves to 10% of original, as it did before, and I use the same mechanism to save now.
    I have gone to Acrobat Pro and optimized down to 8.8mb, but the quality is not acceptable.
    What other variable is there that I haven't discovered?

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • How do I set numbered lists for headings in Pages 5.2, and keep that system of numbered lists saved?

    I have tried to set numbered lists for headings in Pages 5.2 but have not succeeded. I have read similar questions concerning this but this has not helped me...
    When I say numbered lists I mean something extremely important and simple, for instance:
    1. Introduction
    1.1. Background
    1.2. Purpose and Questions
    2. The Legality of Clause X
    2.1. Legality under Article 101.1
    2.2. Legality under Article 101.3
    And so on...
    Heading 1. is selected as "Heading", 1.1 is selected as "Heading 2", and if I had 1.1.1 it would be selected as "Heading 3" and so on...
    I have navigated my way to the Format window, and under the tab "Style" and down to "Bullets & Lists". I have here selected the following: Numbered, Numbers, 1. 2. 3. 4., Tiered Numbers, Continue from previous.
    There are several problems with this currently.
    First, based on the example it becomes "2. Background" when it should be "1.1 Background" instead.
    Second, after writing some body text between the headings and then select a new heading, all the previously selected settings I mentioned above in "Bullets & Lists" have to be reselected.
    So, how do I set numbered lists for headings, or so called sub-headings, in Pages 5.2? And how do I keep that selected system of numbered lists saved so I don't have to retype it for every new heading I type? (e.g. so that Pages knows that every time I choose Heading 2, I want it to number the heading in the way selected)
    Obviously, manually writing the numbers for every heading is not a viable option, as it makes table of contents problematic and is simply tedious. You need an automatic way of doing it, especially if you write long documents where keeping headings in order is absolutely essential.
    Also, reverting back to previous Pages versions (like v. 9 I think?) is not an option as that does not exist on my recently purchased Macbook Pro.
    I need to be able to do this on Pages 5.2 and do it automatically.
    I appreciate any help with this.

    iWork '09 is not "outdated" it still works and works extremely well and whilst not perfect with MsWord it is far far better than Pages 5.2 which has a stream of major issues with exporting. It is also way better and faster to use than Microsoft Office.
    So what is your time and work actually worth? If it is less than $19.99 for 6 months, you may as well just chuck it in and take that job on minimum wages.
    You are assuming things for Office 2014 with absolutely no inside knowledge. Much as we assumed Pages 5 was going to be the long awaited improvement, but ended up being a downgrade to match the iOS version, Microsoft is headed the same way with their mobile versions.
    This is not like getting the "latest" pair of pants where you go with the crowd and throw out your cigarette legs which replaced the flares, which replaced your low cuts which replaced your cigarette legs, which replaced…
    This is work.
    If it does the job and does it well, use it. There is nothing out there to really match what Pages '09 does. Yet.
    LibreOffice can do most but not all, but has a UI that only a mother could love. It's great redemption is that it uses both open formats and the standard Microsoft formats and is under active development. It also opens and saves to just about everything. When they finally work out the Pages formats, I'm sure they will open those as well.
    I use a lot of professional software. Just because the publisher's marketing department says change the product so we can sell more, doesn't mean you have to pay any attention whatsoever. Adobe being a classical example. Most designers are just ignoring their latest subscription based bloatware and getting on with their work.
    Peter

  • I have learned to love PAGES, but I can't figure out how "sections" get linked together and how to unlink them so I can move pages or delete pages with a whole bunch of pages (a section) going away.

    I have learned to love the PAGES program but I will add a new "section" or page to it and then when I look at thumbnails and try to move pages around or delete pages, it treats them as a section of many pages and will only delete several of them together or will add extra blank pages that I don't need. It is very frustrating but must be something I am doing to cause this.

    Burghmom wrote:
    It is the '09 version. I went on the boards and found out that by inserting a page break after each page as I go, I can make each page act individually instead of as a group. Then I can move pages around or delete them through thumbnails. The online manual didn't really help with how to avoid having them act as a group.
    A Page Break pushes the next text to the next page, it is still part of the same section.
    You need to insert a Section Break.
    Peter

  • How do you delete pages temporarily ?

    How do I delete pages temporarily from my website, but still save them in iWeb 2008, so I can re-use them later ?
    Kay.

    There are two ways:
    1 - go to the Inspector/Page/Page and uncheck the "Include page in navigation menu" checkbox. This will keep the page with the site but it won't be available thru the navbar.
    Click to view full size
    2 - create a new site with iWeb, a holding site, and drag the page down to it.
    OT

  • Pages 4.3 (332MB) and Pages 5.0 (455MB) are both installed on my macbook, can I delete Pages 4.3 from my application folder?

    Pages 4.3 (332MB) and Pages 5.0 (455MB) are both installed on my macbook, can I delete Pages 4.3 from my application folder?
    I recently (after upgrading to Mavericks) installed Pages 5.0 (iWorks ’09 with Pages 4.3 was already installed on my Macbook). When I try to open a pages document, I sometimes get the message 'you need a newer version of Pages to open this document.'  When I ctrl-click the pages document and select the program Pages 5.0, the document opens in Pages '05. Other Pages documents open in Pages 4.3. How do I select Pages 5.0 as default program to open my documents? And how do I do that, since pages preferences do not give that possibility? And can I delete pages 4.3 after making pages '05 the default. Or is there another way to solve this?
    kind regards, Sadrach

    Using Get Info to change all documents to open with Pages 4.3 doesn't work. It will work on individual files, but that could be a lot of files to reset.
    This is what works for me. After I installed the new iWork updates I created a folder on an external drive & named it "other applications." I then moved the new iWork apps to this folder & renamed the applications Keynote 6, Pages 5 & Numbers 3. I have icons for two versions of Pages & Numbers (I rarely use Keynote) in my Dock. Even with two versions of Pages & Numbers running, double-clicking an existing file opens in Pages 4.3 or Numbers 2.3. This should also keep the Mac App Store from nagging you to update. Others have renamed the '09 iWork apps & set them as default.

  • How do I delete pages from a PDF?

    How do I delete pages? IAll I want to do is remove a few pages from a large pdf doc? I've paid for the extra software and it still won't let me? No pages menu is coming up in the tools menu?

    Hi,
    Kindly refer to this link:Acrobat Help | Rotate, move, delete, and renumber PDF pages
    Please let us know if you require further assistance.
    Regards,
    Florence

Maybe you are looking for