Numbers 3 documents will not open with maverick

Numbers documents created on the ipad with IOS7 will not open on the MAC with Maverick 10.9.  I downloaded numbers 3 a week ago and it is verified in my download history.  When I go to the App store it says Numbers 3 is installed.  But when I try to open a numbers document (with the MAC) that I had created in Numbers with the IPAD3 using IOS7 it says I need to download the latest version of numbers.  

Hi SFsparkie,
When you upgraded to Numbers 3, the old Numbers 2.3 wasn't removed from your Mac. It's still there in a folder within your Applications folder.
So probably you're inadvertently trying to open the document in the old Numbers.
Open it from Numbers 3.0 (the one in your Applications folder, not in the subfolder) and you should have no problems.
SG

Similar Messages

  • Numbers documents will not open it says "will not open during numbers update"

    My numbers documents will not open.  I keep getting a message telling me my documents will not open while numbers is updating.  I have the latest numbers update already downloaded.

    open the application "Launchpad":
    then click, and hold, on the icon for "Numbers", once the icons start to shake, click the "X" in the top left to remove.  Now click anywhere on the desktop to exit this remove/adjust mode.
    Open the App Store  (menu item " > App Store…")
    now locate and install numbers

  • Numbers document will not open! appears and says to try again later

    no preview of document material when initially open numbers (green numbers imade instrad of spreadsheet preview)
    spread sheet can not be opened try again later
    any ideas how to recover my document?

    If for some reason it appears in your programs, use Revo Uninstaller to fully erase it from the drive. It could also be a registry problem. I suggest using CCleaner. Both can be downloaded for free at http://ninite.com/ . Hope this helps.

  • Encrypted Windows Word Document will not open with Word for Macintosh

    I cannot open a password protected/encrypted word document which was created by Word 2007/2010 for Windows even though I have the password. I have searched the internet and there does seem to be an issue whereby Macintosh Word does not support some of the latest encryption from Word for Windows. Does anyone know of any software that can help either Macintosh compatible or any open source/free software for Windows which can help. I have tried several open source word processors (both on Mac OS and Windows) but these do not help so is there a solution other than having to buy Word 2007 or 2010 for Windows?

    Hi Colin,
    sorry to hear.
    Found another post that mentions Apples Pages to give a try.
    (Free Trial version can be found here http://www.apple.com/iwork/ )
    If that also does not work, I'm out of answers.
    Stefan

  • Whenever I double click on any htm or html document it will not open with firefox it gives a message window saying "Windows can not file path please type correctly" (not extact these words)

    I installed new version 4. Whenever I double click on any htm or html document it will not open with firefox it gives a message window saying "Windows can not file path please type correctly" (not extact these words) .. It was working when old firefox was there..

    Phillipp,
    I tried it again using "save link as", and this time it actually worked! I just now downloaded several more using the "save link as" option, and it works perfectly. Thanks. Problem solved.
    Littleberry

  • In the finder window, column view, I double click on icon, eg. a spread sheet,  and document will not open since I updated to OSXv10.8.2. Help anyone?

    In the finder window, column view, I double click on icon, eg. a spread sheet,  and document will not open since I updated to OSXv10.8.2. Help anyone?

    Hi Ron,
    Highlight one in the Finder & do as Get Info on it, what does open With say to use?
    What did you update 10.8.2 from exactly? 10.6.8 maybe?

  • Cloud documents will not open today?

    Local Pages documents on my Mac will open as normal. Cloud documents will not open today. They worked yesterday.
    Does anyone else have this problem? And did you find a solution?
    Many thanks
    Iain

    OK, I'm replying to my own post.
    I have two documents saved to the Cloud which will not open on my iMac. When I tried to duplicate one in the "open" window, Mac OS brought up a warning that the document was being modified. When I checked it on my iPad the document did not exist. So something went wrong during a sync at some point. On the iPad I could duplicate the document and now I can edit the duplicate on my iMac.
    Summary: at the moment it looks like sync problems with specfic documents and not a general problem.

  • Many 3rd party apps that I have used before now will not open with the alert "XYZ application cannot be opened because the identity of the developer cannot be confirmed"  Why now?

    Many 3rd party apps that I have used before now will not open with the alert "XYZ application cannot be opened because the identity of the developer cannot be confirmed"  Why now since I updated Mavericks?

    The format in which a developer has to sign his application in order for it to be recognized as signed has changed. Update the applications, wherever possible.
    To make a one-time exception to the security policy, follow these instructions. They apply to Installer packages and other installable items as well as applications.

  • My pages documents will not open?

    My pages documents will not open and I am not happy at all?

    Hi italiancooking,
    This may help. In Finder, right click (or control click) on the document icon and Open With > Preview. If this works, copy the content and paste it into a new blank Pages document.
    Regards,
    Ian.

  • One of my pages documents will not open. the others will

    Hello, wondering if anyone has any answers here. One  (only one) of my pages document will not open. The message says `the document couldn`t be opened` and there is a little yellow triangle with an exclamation mark in the middle of it,  next to the message. I used this document this morning, no problem. Also, I checked other pages documents and there is no problem only with one.
    Kind regards,
    Thank you

    Hi italiancooking,
    This may help. In Finder, right click (or control click) on the document icon and Open With > Preview. If this works, copy the content and paste it into a new blank Pages document.
    Regards,
    Ian.

  • Edited clips will not open with other apps

    After editing video clips using Adobe Premiere Elements, clips will not open with other apps (like VLC, Media Player, etc...)

    Sherbowe
    Just saw your post and wanted to leave a just in case note.
    From the information that you and John T. Smith just exchanged, it would appear that you attempted to play back the saved project file (project.prel) with your VCL Player and Windows Media Player. You need to export the Timeline content to a file format that is supported by the player of your choice. By now, you have probably been there and done that.
    This is the just in case note about projects and their project.prel file....let us say that you have two separate projects and you decide to put the content of one project into another. Cannot do. One cannot import a project.prel into another project.prel. You would have to export the Timeline of one and then import that export in the other project. Alternatively, those with Premiere Elements 8.0/8.0.1, 9.0/9.0.1, and 10 could use the ClipMate program to copy/paste between programs without issues. However, with Premiere Elements 11 there are some problems in that regard.
    ATR

  • Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4.  When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

    Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4.  When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

    Clarification: this is a user forum; you are not addressing Adobe here.
    The answer to your question as phrased is: never.
    CS5 is history and it is not longer supported.  There will not be any updates or bug fixes for CS5.
    You need to convert the raw NEF files from your D810 to raw DNGs using the free, standalone Adobe DNG Converter 8.6 RC (beta), the first version ever to support that camera.. 

  • ITunes will not open with iOS 7 update

    iTunes will not open with iOS 7 update

    My sister is having the same issue on iPhone 4. iTunes only loads the menu buttons at the bottom of the app with no content. I'm going to have her try the reset settings.
    I will add that iTunes on my iMac seems to require a cookie from Safari to keep you logged in. I've never seen the same requirement on the phone but iBond's solution will work if you ever have an issue with iTunes log in on your computer.

  • A Pages document will not open.  Others do, but are slow.  Need this document!

    A Pages document will not open and there is a screen annoucement it will not open.  Other Pages documents do open, but are slow.  The one that will not open now was also very slow.  My last visit to the Apple store the Genius Bar said I needed a new HD.  Is this the final straw and it's time to take it in and let them replace it?  Under warrently.

    Do we know what document won't open?
    Do we also know what version of Pages you are talking about, on what MacBook Pro?
    Something tells me you are not using Mac OSX (10.7), the only thing you have noted.
    If your Mac is running slow, the usual reason is your hard drive is too full. OSX likes 10-15% free space.
    Peter

  • IPhoto will not open with pictures when I click on the icon.  It does show that it is open on top toolbar. What happened to my photos?

    iPhoto will not open with pictures when I click on the icon.  It does show that it is open on top toolbar. What happened to my photos?

    Did you run any updaters recently, i.e. like just before this happened?  Try this first fix: make a duplicate copy of the library and try the following:
    1 - delete  the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder. 
    2 - delete iPhoto's cache file,, Cache.dbt, that is located in your Home/Library/Caches/com.apple.iPhoto folder. 
    3 - reboot, launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences..
    OT

Maybe you are looking for

  • How to use Direct Access URL in the FORM tag

    I want to substitute the pageid url (/servlet/page?_pageid=161&_dad=portal30&_schema=PORTAL30) with the direct access urls (pls/portal30/url/page/my_page) to address the pageid conflict between development server and production server. It works perfe

  • Downloaded camera Raw 8.7 and photoshop CS5 still won't run it

    I'm going to cry if CS5 keeps stuffing me around...Can't update programs for any of the CS5 suite won't explain why, just bought a nikon D750 and had to download camera raw 8.7 and photoshop still won't recognise it, so far I have uninstalled and rei

  • Given up on Airdisks

    I've tried to stay patient with the continual dropping off and inability to reconnect of the 2 Lacie disks connected to my AE, but I've now given up - will follow the threads here to see if things improve, but I'm not optimistic. A great idea, whose

  • Brushes have pixelated edge: when filled with color there's a white line at the border

    Hello, I'm trying to make geometric shapes that are black outlines filled with color. I'm drawing the shapes with the pen tool. When I fill them using the bucket tool, there's a pixellated white line separating the black outline and the color infill.

  • Using laplace transform function to get transform in s-domain

    I want to know that how it would be possible to get the laplace transform of a function(for e.g. Ramp) in s-domain using the Laplace Transform Real.vi function in LabView 2012. I need to get the laplace transform in s-domain so that i can plot the Po