Numbers document will not open! appears and says to try again later

no preview of document material when initially open numbers (green numbers imade instrad of spreadsheet preview)
spread sheet can not be opened try again later
any ideas how to recover my document?

If for some reason it appears in your programs, use Revo Uninstaller to fully erase it from the drive. It could also be a registry problem. I suggest using CCleaner. Both can be downloaded for free at http://ninite.com/ . Hope this helps.

Similar Messages

  • Numbers documents will not open it says "will not open during numbers update"

    My numbers documents will not open.  I keep getting a message telling me my documents will not open while numbers is updating.  I have the latest numbers update already downloaded.

    open the application "Launchpad":
    then click, and hold, on the icon for "Numbers", once the icons start to shake, click the "X" in the top left to remove.  Now click anywhere on the desktop to exit this remove/adjust mode.
    Open the App Store  (menu item " > App Store…")
    now locate and install numbers

  • My apple tv is not working everytime i try to down load it stops and says error try again later i have updated credit card itunes and rebooted both and still wont work i am loosing my patience as i cant get any support for this

    my apple tv is not working every time i try to download a movie it says error try again later

    I am having this problem.  At first with the new iPhone 5, and then with the iPad 2.  I am not sure why this is happening. 
    My gut feeling is this is an iO6 issue and here's why -
    The problem mainly occurs with apps.  I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them.  The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
    Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage.  It required me to restore the iPad 2 from backup.  With this restore the same issues occurred - putting the apps back on the iPad would hang up.  The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
    My solution has been to soft reset the device, restart Windows, and continue the process until it's complete.  This is remarkably inefficient and time-intensive but everything works with patience.
    I have been wondering if others have had these same problems. 

  • HT4972 Rental movie will not download on iPad error message try again later but I have enough space to download

    I have rented a movie buy it will not download. I get an error message saying try again later. I have ample space for download on my iPad so I don,t know why it will not download

    Hello elsbeta,
    The following article outlines how to report an issue with your purchase:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933
    Thanks,
    Matt M.

  • In the finder window, column view, I double click on icon, eg. a spread sheet,  and document will not open since I updated to OSXv10.8.2. Help anyone?

    In the finder window, column view, I double click on icon, eg. a spread sheet,  and document will not open since I updated to OSXv10.8.2. Help anyone?

    Hi Ron,
    Highlight one in the Finder & do as Get Info on it, what does open With say to use?
    What did you update 10.8.2 from exactly? 10.6.8 maybe?

  • I have a laptop using OSX 10.5.8, iTunes v. 10.6.3 and Quicktime 7.7.  iTunes will not open.  It says it requires QuickTime 7.5.5 or later.  I've tried reinstalling each of them.  No success.  Don't know what to try next.

    I have a laptop using OSX 10.5.8, iTunes v. 10.6.3 and Quicktime 7.7.  iTunes will not open.  It says it requires QuickTime 7.5.5 or later.  I've tried reinstalling each of them.  No success.  Don't know what to try next.

    QuickTime 7.5.5 for Leopard - http://support.apple.com/kb/DL27
    QuickTime 7.7 for Leopard - http://support.apple.com/kb/dl761
    = New version of Quicktime installed but application reports it needs to have that version installed =
    Open Application > Utilities > System Profiler and check the Quicktime version in Frameworks vs. the version in Applications.  One person had re-installed their operating system.  It had kept the newer Player application but had reverted to an earlier version of the underlying support framework files which many applications utilize.  Re-installing Quicktime 7.7 took care of the problem.  Do this manually, not with Software Update.
    Installation get stuck at "configuring installation" - https://discussions.apple.com/thread/2592979?threadID=2592979  - uninstall Quicktime before installing.

  • I just reinstalled iTunes, and it will not open, as it says iTunes library itl. was created from an earlier version. Any idea what this means, and how I can get itunes to open?

    I just reinstalled iTunes, and it will not open, as it says iTunes library itl. was created from an earlier version. Any idea what this means, and how I can get itunes to open?

    Many thanks.
    That suggests that another application has stashed old QuickTime componentry in your system files.
    So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    If you have a 32-bit version of Windows, open the "System32" folder.
    If you have a 64-bit version of Windows, open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick.  My iTunes will not open because it says i need a 64 bit version.  Already followed the promted instructions but no luck.  Any suggestions??

    I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick.  My iTunes will not open because it says i need a 64 bit version.  Already followed the promted instructions but no luck.  Any suggestions??

    Oh, you do have the C2D! That's great!
    I'm no technical expert, I just like to help out whenever or wherever I can so... I don't know if this can help you, but let me tell you about how I got my Snow Leopard to run in 64 bit mode. When I got my (late 2008) iMac it was running in 32 bit mode under Tiger (2.4 GHz/Core 2 Duo). I eventually upgraded to Snow Leopard & it was running in 32 bit mode (by default) w/1 GB RAM.  
    Somewhere along the line, I happened to watch a YouTube Video that showed how to upgrade an iMac's RAM, so I ordered two - 2GB sticks of Crucial RAM and then - under the guidance of the 14 or 15 year-old young man who posted the video on YouTube; wearing a rather fashionable static-electricity-neutralizer-wrist-strap, I removed 1GB of RAM & plugged in the 4GBs of RAM. So - boom like that, it was like I bought a brand new machine.
    It was over a year later when I stumbled across a way to boot Snow Leopard into 64 bit mode. Turns out that if you boot while holding down the 6 & 4 key combo (the ones above the QWERTY keys), then the machine runs in 64 bit mode. Go figure. Now my Snow Leopard and just about all of my applications - with the ironic exception of iTunes - runs in 64 bit. iTunes seems fine though; if there's a performance bottleneck, I really can't tell.
    Well, that's about it..
    I hope that something I've mentioned can help you achieve your overall goal.
    Finally, it's hard to jump onto a train, a large cat, or a surfboard that's already moving. But don't be surprised when someone a fraction of your age shows you how to.
    Best Regards,
    mm~

  • Tried opening a file in library and it states can't open database with library name? It says Relaunch then will not open? and Blocks me completely from Aperture. I have to go to Finder to Rename it? I need this file how do I get it to open?

    Tried opening a file in library and it states can't open database with library name? It says Relaunch then will not open? and Blocks me completely from Aperture. I have to go to Finder to Rename it? I need this file how do I get it to open?

    Aftershotz,
    You're going to have to give a bit more information.
    What do you mean by "opening a file in library?"  There is no function of Aperture to open files -- you can open (switch) libraries.
    You'll have to be more specific about error messages, too.  Perhaps some screenshots would be useful to diagnose your problem.  "Can't open database with library name" is not enough detail about what Aperture is really telling you.
    nathan

  • Upon upgrading to Yosemite, the Pages and Numbers apps will not open (although they are the latest versions) and Keynote will not upgrade; how do I go about getting the apps to open?

    Upon upgrading to Yosemite, the Pages and Numbers apps will not open (although they are the latest versions) and Keynote will not upgrade; how do I go about getting the apps to open? Is this a common issue?

    Hi Madhattanite,
    Welcome to the Support Communities!  When did you purchase your Mac?  The first thing I would suggest is to review the information in the resource below for the Up-To-Date Program for Pages, Numbers, and Keynote.
    Once Yosemite is installed, you should have the option to Accept the Pages, Numbers and Keynote apps in the Mac App Store Purchases pane.
    Apple - Up-to-Date Program for Pages, Numbers, and Keynote
    I hope this helps ...
    - Judy

  • I use LR5 on my Mac Desktop (Yosemite 10.10.1) and it works fine. I have downloaded LR5 to my new MacBookAir (Yosemite 10.10.1) and it will not open.  Message says program in running on too many computers.  I once had it on another MacBookPro (Yosemite 10

    I use LR5 on my Mac Desktop (Yosemite 10.10.1) and it works fine. I have downloaded LR5 to my new MacBookAir (Yosemite 10.10.1) and it will not open.  Message says program in running on too many computers.  I once had it on another MacBookPro (Yosemite 10.10.1), but no longer use that computer and LR5 does not show up in the applications. 

    What is the exact complete word-for-word error message?
    Is this the Creative cloud version of Lightroom or the standalone (also called "perpetual license") version of Lightroom?

  • TS1702 My pages has been stuck and will not open. Just says it is installing. I have tried several to no avail. I could reload but i want the information stored.

    My pages has been stuck and will not open. Just says it is installing. I have tried several times to open it, to no avail. I could reload for $9.99 but i want the information stored.
    Thanks,
    Terrance

    Thanks for this mha007 - I can now open FF with a new profile. Can I copy my settings from the old profile or will this bring over the same problem, maybe a corrupt file. If it would bring the same problem, is there any way I can check which file is corrupt, apart from taking them over one by one?

  • One of my pages documents will not open. the others will

    Hello, wondering if anyone has any answers here. One  (only one) of my pages document will not open. The message says `the document couldn`t be opened` and there is a little yellow triangle with an exclamation mark in the middle of it,  next to the message. I used this document this morning, no problem. Also, I checked other pages documents and there is no problem only with one.
    Kind regards,
    Thank you

    Hi italiancooking,
    This may help. In Finder, right click (or control click) on the document icon and Open With > Preview. If this works, copy the content and paste it into a new blank Pages document.
    Regards,
    Ian.

  • A Pages document will not open.  Others do, but are slow.  Need this document!

    A Pages document will not open and there is a screen annoucement it will not open.  Other Pages documents do open, but are slow.  The one that will not open now was also very slow.  My last visit to the Apple store the Genius Bar said I needed a new HD.  Is this the final straw and it's time to take it in and let them replace it?  Under warrently.

    Do we know what document won't open?
    Do we also know what version of Pages you are talking about, on what MacBook Pro?
    Something tells me you are not using Mac OSX (10.7), the only thing you have noted.
    If your Mac is running slow, the usual reason is your hard drive is too full. OSX likes 10-15% free space.
    Peter

  • Page documents will not open.

    Suddenly some of my page documents will not open. I get this message: You need a newer version of Pages to open this document. I have the newest version and it has been opening these documents just fine previously

    Sounds like you have both Pages 5 and Pages '09 on your Mac and are alternately opening them.
    When Pages 5 was installed, your iWork '09 software was moved to your Applications/iWork folder.
    Pages '09 can not open Pages 5 .pages files.
    Don't toss Pages '09 however as it has vastly more features and is less buggy than Pages 5.
    Peter

Maybe you are looking for