Numbers for iOS - Documents frozen in update mode

After restoring the contents of my iPad2 to my new iPad (4th Gen) two of the documents in Numbers are "frozen" in update mode. The same two documents are being updated according to the pad, but nothing happens. I have restarted the iPad several times which did not help. I can neither open nor delete the two documents in question. Can anyone help med by suggesting a possible fix?

are all your documents saved on your desktop already, or icloud? If so you could delete the apps and reinstall. then download from icloud/desktop again.
Jason

Similar Messages

  • Frozen Numbers for iOS on my iPhone

    I recently purchased the Numbers for iOS for my iPhone. Everything was working fine until I made a spreadsheet change on my MacBook Pro. The iCloud began to update itself and I could see it happening on my iPhone but the pinwheel kept spinning for hours and hours. I was finally able to force it to stop but now the entire Numbers for iOS on my iPhone is frozen. I have attempted to perform other steps to resolve this issue but the app remains frozen. iCloud has been updated with renamed files and asks me if I want to use iCloud to update my data but nothing happens when I select the "Use iCloud" button. This lack of touch interaction with this app is now the norm and I am unable to use the Numbers program on my iPhone. How do I go about correcting this problem so I can resume using Numbers on my iPhone?

    I did reset my device but did not redownload the app as I was not sure if the problem was within iCloud or with the app itself. I have since reverified that iCloud was not the problem via checking it's interaction with other iCloud dependent apps. I have since redownloaded the Numbers app and everything is now working fine.
    Sorry to have bothered you on this problem but this is my first rodeo with the iOS apps so it is a learning process. Now I should have a better feel for what could be causing some problems and should be able to problem solve them without needing this forum.

  • Content size when creating a PDF in Numbers for iOS

    I want to create a PDF document from Numbers for iOS, but it will not allow me to center content on the page or resize it to take the whole page. I can do it if I try to print a document, I can adjust the size of my content, but if I just want to create a PDF, it makes my content small and all bunched up in the top left corner and the document does not look good.

    I suspect that even if you could find the mapping information (pass as to where) it would simply tell you that Style A in Fm was mapped to Style B in Rh but not give you any information about how Style A was defined in Fm.
    I think your only options are to create a CSS as you suggest or, as I would, create redefine the Word Style Mapping Template to suit. By going to Word first, you can edit the output for better page breaks and other tweaking you might want.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • How do I add video to a Pages for iOS document?

    I thought that with the latest updates to Pages that there would be 1:1 parity between the MacOS X and iOS versions of  Pages.  However, I am unable to figure out how to add video to Pages in iOS as I can easily do in Pages for MacOS X (just drag & drop).  What is the secret to including video into a Pages for iOS document? Or is this just not possible?  I don't see how audio can be added either.  It seems to be Photos only from the + icon.

    The video should be in your camera roll, tap the +, then the music note and choose your video.

  • Anyone know how to go to the last active row in Numbers for iOS ? There is no Home or End key on iPad.

    Anyone know how to navigate through a spreadsheet in Numbers for iOS on an iPad. Specifically to go to the end of an active file since there is no End key.

    see if any of this works for you
    On a smaller keyboard, such as the wireless, or on portables, you can use fn- left arrow for home and fn- right arrow for end.
    On a Mac, 'home and 'end' take you to the beginning and the end of document, respectively. Getting to the beginning or end of a line is done with cmd- leftarrow and cmd- rightarrow. Emacs shortcuts, such a ctrl-a and ctrl- e also work in most places, where the app is done right.

  • Dynamic Page Numbering for DPS documents

    Since we don't have just 1 document for the entire publication; is there any way to have a footer that has the page number in any way? (without having to manually update every page?)

    Use the book feature.
    But it is difficult to number your publication if you have vertical and
    horizontal pages.
    And why do you need page numbers anyways? Digital has hyperlinks and scroll
    bars for solid navigation
    (mobil gesendet)
    Am 09.01.2012 19:03 schrieb "blasto333" <[email protected]>:
       Dynamic Page Numbering for DPS documents  created by blasto333<http://forums.adobe.com/people/blasto333>in
    Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4126818#4126818>

  • Numbers for IOS -- How to paste formulas and/or change formatting

    I'm a brand new user of Numbers for IOS (version 5.0.1) on my iPhone...  It was suggested in the iWork > Numbers forum that I check in one of the IOS forums for help with this version of Numbers, and the iPhone forum has a comment to the effect that there are more IOS Numbers users in the iPad forum....  So here's my question:
    I received an email with a cute countdown formula for the new year, =10*9*8+7+6-5+4*321 so I copied it from my email, and pasted it into a cell in Numbers for IOS.  I found that it won't paste at all (the black "Paste" symbol doesn't appear) unless I hit the "T" for text mode, so that's what I did, and I pasted it into the cell of a table.  But it shows up simply as =10*9*8+7+6-5+4*321, not the value of that expression, which is supposed to be 2012.  So I double-clicked a different cell, and selected the = symbol, and then tried to paste the formula into the green bar at the top, but like I said, the only thing that pops up in that mode is the magnifying glass.  So I typed the formula in, using the x in place of the asterisks, and it worked just fine.  So I can use formulas, and I can paste text into cells, but I just can't paste text into cells and have Numbers interpret the text as a formula.  Any hints?  Thanks!

    This isn't a pro answer but I found if you use the + cursor and select all cells and the set font, color or whatever you want, when you then go to specific cells, it will be the way you want.

  • To Activate the Approval Process when document is in update mode

    Dear Expert,
                        I have applied the Approval Process for UDF using the query "Select Distinct 'True' From ORDR T0
    Where IsNull($[ORDR.U_Rebate.number],0)>0 and $[ORDR.DocType]='I' ".
    Now as the field is UDF user is able to modify even after approval procedure.
    Please help me to apply the above query for the  Approval process even when the document is in update mode.
    regards,
    PankajK

    Dear Pankaj,
    Current B1 design only support approval for adding document. Update will not trigger approval.
    You may use SP_TN instead to block user updating it. If you are not familiar with the SP, search the forum first.
    Thanks,
    Gordon

  • How do you create forms in numbers the same as in numbers for ios

    I have a Macbook Running Maveriks 10.92 and Ipad running IOS7. I have numbers on both machines. On the Ipad there is a function that allows you to add a form to enter data from a sheet using Popups.
    I can not find this function on the Macbook Pro.
    All versions are the latest.

    Numbers for iOS supports forms.
    Numbers for OS X does not support forms (yet).
    Make a request for this feature using the Provide Numbers Feedback item in the Numbers menu.
    Regards,
    Barry

  • Transpose a column to a row in Numbers for IOS

    I want to transpose a column to a row in Numbers for IOS, and none of the usual formulas are working. Any thought?

    In Numbers '09 (the current Mac OS X version) the formula below will transpose rows and columns. The transposition is to a second table, and transposes entered data and the results of formulas.
    =OFFSET(Table 1::$A$1,COLUMN()-1,ROW()-1)
    If this solution does not work in Numbers for iOS, I'd suggest reposting in the iWork for iOS community. This area is for Numbers for Mac OS X topics.
    Regards,
    Barry

  • Is it possible to search for a specific term or data in Numbers for iOS?

    I looked for similar questions, but all of the similar questions did not specify if they were talking about the Mac version or the iOS.  So I apologize if the question has been asked.
    Is there a way to search for a specific term or criteria in Numbers for iOS?
    My father owns a small business and has a large inventory of parts.  He wants a simple way to search his inventory for a particular part number and see how many of a the specific part number he has in his inventory, while not in the shop or having to call in.  He wants to take an iPad along with him.
    My first thought was to create an spreadsheet.  I have a basic knowledge of how spreadsheets work, and I don't think my father would like anything more complicated.
    I was thinking about making the 1st column list the part number, 2nd column list the quantity in the shop, 3rd column list the quantity in the truck.
    If Numbers for iOS is not able to do this, suggestions for alternatives are welcome.
    Thanks in advance

    Hi j4nitor
    Would the "Find" option in the "Tools" menu do the job?
    If you search for the part number, it will be highlightet, and with your outline for a setup, I guess that would give you the overview you are talking about.
    Hope it helps.
    Best regards
    Ole

  • Is anyone from Apple Support reading these questions regarding Numbers for IOS crashing?

    Is anyone from Apple Support reading these questions regarding Numbers for IOS crashing?

    This is a user – user forum.
    Leave Apple feedback here: https://www.apple.com/feedback/numbers_ios.html

  • How do I add a comment to a cell in Numbers for iCloud beta like I can in Numbers for ios???

    I can't be the only person to find it incredibly frustrating that it seems impossible to add a comment to a cell in beta. I use this function a lot on my ipad - is it really not available in beta?? And if not, why not??

    Hey lolitajoon,
    Thanks for the question. You are correct, comments are hidden from all iWork apps when imported to iWork for iCloud beta. Please note that the current release of Numbers for iCloud is a beta version. Therefore, certain features aren’t yet supported.
    Opening iWork files in iWork for iCloud beta
    http://support.apple.com/kb/HT5663
    Features that behave differently after importing your document
    These features behave differently in iWork for iCloud beta. They don't change in the original copy of your iWork for iOS or iWork for Mac document.
    Importing from all iWork apps
    - Comments are hidden.
    Additional information:
    Numbers for iCloud beta: Coming soon in Numbers for iCloud beta
    http://support.apple.com/kb/PH12840
    Thanks,
    Matt M.

  • GRPO Document  Opening in Update Mode

    Hi All
    When i saved the GRPO Document and again i try to navigate to the saved document it is opening in update mode and if i update then it become 'ok' mode and again if i try to navigate the posted document  it is opening in update mode again
    how can i overcome this issue
    iam using PL10 and iam also using User Defined fields in the Title Level Document
    Thanks in Advance

    Hi Madhu......
               I think you have applied FMS on any one of the field and kept it refresh regularly on some other field. So either you should remove the FMS or you should keep it on display saved values. This will fix your problem.....
    Regards,
    Rahul

  • Where can i get reversal documents numbers for any documents

    Hi,
    pls tell me where can i see all reversal documents numbers eg: invoice document number..
    like that , may i know any tables and t-codes .
    thanks..

    this sounds like an interview question...
    FI documents are stored in table BKPF, if a document is reversed, the reverse document number will be stored in BKPF-STBLG
    SD invoice => table VBRK => field to check: SFAKN
    MM invoice => table RBKP => field to check: STBLG
    etc.
    as you can see for each type of document you'll find the information is separate tables

Maybe you are looking for