Numbers found in Search

Earlier versions of search showed the total number of files found matching the search criteria and more importantly in which folder they are to be found.
Version 2.1 which I now have does not appear to do this. Is this a function that has been dropped or is there a way of getting these figures?

This is not a folder search problem. The problem occurs in collections too. I'm selecting a collection which has subcollections. When I do a search within that collection, LR1 showed me in which sub-collection the images were found, LR2 does not. That looks like a non-advertised step backwards!? I hope I am missing someting.
Here's the complete task:
Find an image in a collection and move it to a different collection.
John. How can smart collections solve this?

Similar Messages

When searching the calendar in list view, appointments erlier than a few years could not be found after search. en appointment from 1974 could not be found although it appears in the list.

When searching the calendar in list view, en appointmet erlier than a few years could not be find although the appointmet is listed in the List wiew ???,
An appointment from 1974 could not be found, in SEARCH MODE, although it appears in the calendar.

Pardon me for a moment while I (politely) rant in your general direction...
This type of response is not just unhelpful—it is the antithesis of helpful.
This is a support forum. Its purpose is helping to resolve people's problems. Sometimes those problems are going to require long explanations or lots of information. That either comes out in the original post or over the course of several back-and-forth replies; the former produces long posts but takes less time overall than the latter.
If you don't have the patience to read through a long post, then just move on. Posting a "too long, didn't read" comment adds nothing beneficial to anyone. All it does is reveal that the person who made that comment thinks it's important to tell everyone that their attention span is too short for anything longer than a tweet.
Yes, my post was long. Had you read it, you might have understood why it's so long. I'm trying to provide information that people searching these forums about this problem might find helpful. I did this because when I searched for info on this problem, I found lots of people with a similar problem, but no answers that went beyond "restore from backup". Since that advice wasn't the solution for me, I decided that more information might prompt someone with more knowledge and access than I have to investigate. Since you couldn't be bothered to read it, you clearly aren't the kind of person whose attention I was hoping to catch.
Certainly I could have made the post shorter, but I think putting it into a narrative like this makes it easier to follow and provides a context that a terse recitation of bare facts does not. If you disagree, that's your prerogative, but please don't waste everyone else's time by posting a comment just to say that you didn't read it.
I find it appalling that someone who's able to reach Level 6 on these support forums would post a "tldr" comment. That does not reflect positively on you or these forums.
End of rant.

Error in Z-Payroll function (No free numbers found for indexed perform)

Hi SAP-HR Experts .
I tried to write a Payroll Function by Pe04 .
When i saved it into PC40 Packege after that it gives me error that
Message no. P0712 , (" No free numbers found for indexed perform")
Please suggest me How to solve this .
Thanks & Regards : rajneesh

Hello Rajneesh,
Customer fuctions can not began with z as this is in the SAP namespace.
If you are using the customer namespace then please review SAP Note No. 1324745
Regards,
Manny

Is it possible to view line numbers in the search results in Dreamweaver CS5?

Is it possible to view line numbers in the search results in Dreamweaver CS5?
If so how do I switch it on.
Thanks

I don't think so.
Just double click on results in your Results Panel.
DW will open the page to that line of code.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Why are some emails only found in 'search', they do not exist in any of my folders?

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1030552 /questions/1030552]''
Emails like bills for my phone and electricity only exist if I do a search for them. They are not in any of my folders. My Junk folder was not previously visible but now is but is empty. Maybe future junk will go there but I still want to know where all the other emails are stored. Where is this limbo folder with emails that can only be found when searching?

Are you talking about a Pop or IMAP mail account?
If IMAP and you are viewing the remote Junk Folder, does this folder get emptied by the server periodically?
Do you have settings in Thunderbird to auto delete Junk after x days?
check here:
Tools > Account Settings > Junk Settings for the mail account
at the bottom - ''Automatically delete junk mail older than xx days'' - is this selected?
''re: On searching for them I can find them but still I don't know where they are ''
Are you using Global Search?
The additional flters on the left side will help to narrow down the list.
If yes, click on 'Open email as list'
then right click on column headers and select 'Location'.
This will tell you the folder.
For future reference:
you could use Message Filters to capture those 'bill' emails and put them in a specific folder.
Create a folder called 'Bills'.
then create a message filter using info like this example.
Filter Name : Bills
Apply filter when:
* Select ' Manually Run
* Select; Getting new mail
* select: Filter before Junk classification
* select: Match any of the following
* 'FROM' and 'IS' and email address
* click on small +
* add another bill email address - repeat as required.
Perform these actions:
* 'Move message to' and select Bills folder on account.
* click on OK to create the Filter.
* Make sure it is enabled.

WCS#2009.10.20.11.20.34: No matching users were found with search string ..

Hi,
I setup my webcenter spaces using OID. I used the console application to setup OIDAuthenticator. I can see OID users and groups in the console application. I can also login to webcenter spaces using any of the OID user. But when I try to create a page in webcenter spaces I get error
WCS#2009.10.20.11.20.34: No matching users were found with search string ..
Also, when I try to change permission grants for a given page in webcenter spaces using 'Set Page Access' I cannot search for any of the OID users.
I have modified my jps-config.xml to add
     <property name="username.attr" value="uid"/>
<property name="user.login.attr" value="uid"/>
inside the 'idstore.ldap' serverInstance as mentioned in the document. But stilll it does not work.
Can anybody help me..
I see the following error in my WLS_Spaces-diagnostic.log
[2009-10-20T11:20:34.203-05:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: executive] [ecid: 0000IHmjzSbFg4WFLzyGOA1ArTye00000E,0] [APP: webcenter] WCS#2009.10.20.11.20.34: No matching users were found with search string executive
[2009-10-20T11:20:34.203-05:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: executive] [ecid: 0000IHmjzSbFg4WFLzyGOA1ArTye00000E,0] [APP: webcenter] [[
oracle.webcenter.webcenterapp.security.WCSecurityException: No matching users were found with search string executive
     at oracle.webcenter.webcenterapp.model.security.WebCenterSecurityUtils.getPrincipal(WebCenterSecurityUtils.java:494)
     at oracle.webcenter.webcenterapp.model.security.WebCenterSecurityUtils.getUserPrincipal(WebCenterSecurityUtils.java:377)
     at oracle.webcenter.webcenterapp.internal.view.shell.WebCenterPagesManagerImpl._grantCustomPermission(WebCenterPagesManagerImpl.java:650)
     at oracle.webcenter.webcenterapp.internal.view.shell.WebCenterPagesManagerImpl.createPersonalPage(WebCenterPagesManagerImpl.java:582)
     at oracle.webcenter.webcenterapp.internal.view.backing.BoilerplateBean._createPage(BoilerplateBean.java:818)
     at oracle.webcenter.webcenterapp.internal.view.backing.BoilerplateBean.clickCreatePageFromWizard(BoilerplateBean.java:947)
     at oracle.webcenter.webcenterapp.internal.view.backing.BoilerplateBean.clickCreatePageFromWizard(BoilerplateBean.java:929)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodExpression(UIXComponentBase.java:1282)
     at oracle.adf.view.rich.component.UIXDialog.broadcast(UIXDialog.java:81)
     at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:145)
     at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:145)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:87)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:87)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:298)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:91)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:81)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:787)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:280)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:165)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.portlet.client.adapter.adf.ADFPortletFilter.doFilter(ADFPortletFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterShellPageRedirectionFilter.doFilter(WebCenterShellPageRedirectionFilter.java:210)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterShellFilter.doFilter(WebCenterShellFilter.java:603)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:65)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.wls.JpsWlsFilter$1.run(JpsWlsFilter.java:96)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.wls.util.JpsWlsUtil.runJaasMode(JpsWlsUtil.java:146)
     at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:140)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterLocaleWrapperFilter.processFilters(WebCenterLocaleWrapperFilter.java:256)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterLocaleWrapperFilter.doFilter(WebCenterLocaleWrapperFilter.java:228)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.security.idm.ObjectNotFoundException: No User found matching the criteria
     at oracle.security.idm.providers.stdldap.util.DirectSearchResponse.initSearch(DirectSearchResponse.java:171)
     at oracle.security.idm.providers.stdldap.util.NonPagedSearchResponse.<init>(NonPagedSearchResponse.java:52)
     at oracle.security.idm.providers.stdldap.util.NonPagedSearchResponse.<init>(NonPagedSearchResponse.java:43)
     at oracle.security.idm.providers.stdldap.util.LDAPRealm.searchUsers(LDAPRealm.java:480)
     at oracle.security.idm.providers.stdldap.LDIdentityStore.search(LDIdentityStore.java:265)
     at oracle.security.idm.providers.stdldap.LDIdentityStore.searchUsers(LDIdentityStore.java:358)
     at oracle.webcenter.framework.service.Utility.getUserFromUserName(Utility.java:571)
     at oracle.webcenter.webcenterapp.model.security.WebCenterSecurityUtils.searchUser(WebCenterSecurityUtils.java:315)
     at oracle.webcenter.webcenterapp.model.security.WebCenterSecurityUtils.getPrincipal(WebCenterSecurityUtils.java:486)

I have run dead smack into this issue using AD also. Is there a solution? I have tried all of the options for the following settings which seem to control the look up process:
<property name="username.attr" value="cn"/>
<property name="user.login.attr" value="sAMAcountName"/>.
For me, this issue rears its ugly head when attempting to add a role to an AD user. I can enter the login name in the find user box, click the find button, and the user is found. I select the user, pick the role, click "Add Member(s)", and then bam "No matching users were found with search string <login user>" message.
Based on my analysis of the problem, my guess would be that the look up process, which works, differs from the role assignment process in source of data and/or the key-field used to find a match.
Any help would be greatly appreciated.
Thanks In Advance.

Document was not found in search results after full crawl run for a sharepoint web application.

Hi
in a sharepoint farm i started full crawl , and after when i search a document with its name its was not display in search results.
how to trace this issue
adil

HI
i started full crawl for content source and
when i search a document with s it s documentid :
the document was found,
but when i search same document with its name it was not found.
the documents those not found with its name was last month documents only and before
that old documents was found in search results when i search with its name value.
- the last month we moved the content database storage to new location
- i stopped all sharepoint services including search (stopped crawling ) and started again when storage
migration completed
adil

Are test sites able to be found on search engines?

Hello all. I have created a site as a test and did not want this test site found by Google etc, are BC test sites found by search engines?
thanks
Martin

Post a link of the development site to another site, forum or blog that is indexed then google will go take a look at the site linked and index it unless you deny it fully with a robots.txt

Export page numbers found in a search? [edited by host]

I used Acrobat Pro 9 to search for a term in a pdf, and found where it occurs by page number. How do I export those page numbers to a text file?

Know what's even more inefficient ? Typing each page number in by hand because adding automatic page numbers boldfaces the text beyond recognition due to some jacked up software.
Look at the other poor soul who is experiencing kind of the same problem with absolutely no replies. His thread is entitled , "Text Boldens".
Oh wait ! there is a reply Mine , WITH THE SAME QUESTION !
So i figure it's equally as inefficient to post in the manner that poor guy did.
Well at least I know someone actually read this thread. Thanks for your help.
Maybe this is a good thing, because I am an insomniac and I get drowsy each evening typing each number by hand and then manually placing it WITHOUT guides/rulers, because guides/rulers are only allowed in Adobe profesional via a cruel & unusual marketing/punishment tactic !

ITunes 11 adding songs to Library which don't show up but can be found by Searching - but can't be player

Hello,
I got a little problem here...
My iTunes 11 won't show the titles of a new album i tried to import!
I imported them the normal way, after this i recognized there was a problem, i had the album two times. I tried to fix it by changing the album name on every track again... It didn' work so I removed the tracks from my Library... then I wanted to reimport them, but... they just didn't come up...
I looked for them and found them in my Media folder. I deleted them there again and tried to import again... Nothing... they just won't appear in iTunes but are always present in the Media folder!
I can also search for the band in iTunes and can find it, but if i press play (also if the songs can be found in the Media folder) it won't do that... it just doesn't show them, i can't remove them from my Library and can't play them!
Does anyone have a solution for a problem like this?
Sorry If my english is bad at the moment, but i'm very tired and the day wasn't funny at all...

Hi Air Flute
Welcome to the Apple Discussions
Go to this FAQ http://discussions.apple.com/thread.jspa?threadID=122021
Repair Permissions as it says then follow a link to one of the Utilities to run the Cron Scripts (I use MacJanitor as it is free).
8:51 PM Saturday; February 3, 2007

Where are the many missing features in Numbers found?

The more that I use Numbers the less likely that I will ever go through the motions of trying to get Numbers to do enough of the things that have to be done in order for my income tax program to work. Like in another post I have some of my smaller tax forms to say that they are too big to be imported. There seems to be too many missing features to do a useful job.
This leaves trying to use Numbers to handle new small, small, small spreadsheets. At the present times I have little problem setting up a format for a cell providing the formatting is available. In Excel the easiest way to copy a format to a new cell is to use format painter. Many time copy/paste will work. But copy/paste will move the formula also. I have not been able to find a way to do this with Numbers.
So far the sliders feature is the one feature that interests me enough to try to use Numbers in the real work handling portion of my business. Many things I want to do either I can't find out how to do them or there are too many added keystrokes needed compared to Excel to make me want to do a spreadsheet in Numbers.
Since the majority of my spreadsheets do not use a header row or header column I have to get that turned off. Tax sheets have a lot of blank spaces to start things out & normally will be different than the next sheet.
I used a lot of cell/range names as well as individual cells. I use 450+ cell names in my main Form 1040, A,B,D,NE,IA page. That still leaves me needing to know the row/column designation most of the time. I cannot find where that information is displayed in Numbers.
I keep looking, but generally do not find the needed feature that I need. Many like the cell designation is so basic. Being able to use the arrow keys to move to a cell for inclusion in a formula is another one that I am unable to do. Using the help files do not come close to answering any question that I have with Numbers. Where is the Numbers, "Missing Manual?" I need what I don't have & may not be made at the current time.
Like Pages 1.0, Numbers 1.0 doesn’t seem ready for prime time use. There are too many missing features be a very complete spreadsheet. Some I probably can’t find, some probably are not there.
I need help.
Bill the TaxMan

HolgerA,
Page Headers and Footers are gone, but are returning, according to a recent KB article:
Exerpt...
Some features in upcoming releases in the next 6 months
Pages
Customize toolbar
Vertical ruler
Improved alignment guides
Improved object placement
Import of cells with images
Improved word counts
Keyboard shortcuts for styles
Manage pages and sections from the thumbnail view
Numbers
Customize toolbar
Improvements to zoom and window placement
Multi-column and range sort
Auto-complete text in cells
Page headers and footers
Improvements to AppleScript support
Keynote
Customize toolbar
Restoring old transitions and builds
Improvements to presenter display
Improvements to AppleScript support
In the meanwhile, you can continue to use these features by accessing the previous versions of the iWork applications which remain installed on your Mac. The previous versions can be found in Applications > iWork ’09.Reverting documents created in the new iWork for Mac applications to the previous version’s file formatNew or existing documents you open in the new versions of Pages, Numbers, and Keynote use the new unified file format. These files can’t be opened in the previous versions of the iWork applications. To revert the document file format to the previous version, you can do one of the following:
Documents that you haven't edited can be reverted to the iWork ’09 version by selecting File > Revert To.
If you have edited the document and want to preserve the edits, you can save it as an iWork ’09 document by selecting File > Export To, then choosing Pages ’09, Numbers ’09, or Keynote ’09.
Jerry

I set up a location based reminder in notification last week to test it out. Worked great, but now I cannot get rid of it. It does not show up in any list on the notifications pages, but can be found in search. How can I get rid of this notification?

Last week I set up a location based reminder in notifications to test it out. Worked great. However, I can't get rid of it. It does not show up on any of the pages, either reminders or completed. I can search and find it, shows it should be in reminders page, but it is not there for me to remove. Any ideas?

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

No objects found when searching for a subset of tablespaces on a RAC db

I'm creating a rule to monitor metric Tablespace Space Used % on a RAC database but I do not want to include certain partioned tables. However, when I click on the search selected objects, it tells me that no tablespaces ('No Objects Found') are found. This is the only database that is on a RAC environment that I'm having this issue. Any ideas?

If you wanna kill all processes (those currently running, well said) which names are in the CSV file, then do:
@(Import-Csv 'KillThem.csv') | kill -ErrorAction Ignore
Those processes that are not running won't be killed (of course) and won't mess the display with error messages, because they'll be ignored.
Important: the Import-Csv object must have the property Name.

RoboHelp X5 "no topics found" in "Search" tab

There has been one workstation used for RoboHelp HTML
development/compiling and has no issues. A second workstation was
built with the same application/version (RoboHelp X5.0.2). After
compling projects on this second workstation, when a .chm file is
opened and the users perform a search via the "search" tab there
are "no topics found". If the same project is complied on the
initial workstation, topics are found via the "search" tab. Anyone
have an idea on what is causing this problem on the newly built
workstation?

Below is information from the workstation that does not seem
to be compiling correctly. I registered the .dll, but the "search"
still did not function (did a compile of the project need to occur
after the re-registration?). I will be getting the result from the
workstation that is compiling properly shortly and will post the
result.
General Info
Report EXE: c:\temp\MJsDiag.exe
Report Run Date: 1/20/2009 1:29:06 PM
Report EXE Version: 2.7.2.0
Download URL:
http://helpware.net/downloads/
Operating System: Windows NT 5.1.2600
SysLocale.DefaultLCID: 0x0409 (1033)
SysLocale.PriLangID: 0x0009 (9)
SysLocale.SubLangID: 0x0001 (1)
DecimalSeparator: .
HH Installed: YES
HH Version: 5.2.3790.2847
HH Friendly Version: > 1.4a
H2 Installed: NO
H2 Version:
IE Installed: YES
IE Version: 6.0.2900.3462
IE Friendly Version: Internet Explorer 6 (Windows XP SP2)
NT Administrator
NT Admin Check: Current user has full administor privileges:
YES
HTML Help Run-time Components
File Registered OK: C:\WINDOWS\system32\hhctrl.ocx (Version:
5.2.3790.2847)
File Registered OK: C:\WINDOWS\system32\itss.dll (Version:
5.2.3790.2453)
File Registered OK: C:\WINDOWS\system32\itircl.dll (Version:
5.2.3790.2453)
File Found: C:\WINDOWS\system32\hhctrl.ocx
Version = 5.2.3790.2847
Registry Info: {adb880a6-d8ff-11cf-9377-00aa003b7a11}
ClassName = HHCtrl Object
InProcServer32 = C:\WINDOWS\system32\hhctrl.ocx
ProgID = Internet.HHCtrl.1
DLL is Found and Registered OK = YES
File Found: C:\WINDOWS\system32\itss.dll
Version = 5.2.3790.2453
Registry Info: {5D02926A-212E-11D0-9DF9-00A0C922E6EC}
ClassName = Microsoft InfoTech IStorage System
InProcServer32 = C:\WINDOWS\system32\itss.dll
ProgID = MSITFS1.0
DLL is Found and Registered OK = YES
File Found: C:\WINDOWS\system32\itircl.dll
Version = 5.2.3790.2453
Registry Info: {4662DAA5-D393-11D0-9A56-00C04FB68BF7}
ClassName =
InProcServer32 = C:\WINDOWS\system32\itircl.dll
ProgID = ITIR.WordWheelBuild.4
DLL is Found and Registered OK = YES
For HH Version Info See:
http://helpware.net/htmlhelp/hh_info.htm
HTML Help 1.x Registry Settings
Description: If present this Key can disable HH Shortcuts and
HH WinHelp commands on the local PC
Reference: KB 810687, KB 323180
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\System\
Value: HelpQualifiedRootDir (string value) =
-> Report: Policy is not enabled. HH Shortcuts are not
restricted on local machine.
Description: This key can be used to enable Hhctrl.ocx
ActiveX Visual controls on servers
Reference: KB 892675
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x\HHRestrictions
Value: UrlAllowList (string value) =
Value: MaxAllowedZone (string value) = 3
-> Report: Settings reported for information only.
Description: This key allows MS programs such as iexplore.exe
to open ITS file that do not have a .CHM file extension
Reference: KB 873343
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x\HelpRestrictions\AllowedExtensions
-> Report: No special file extensions have been enabled
on this PC.
Description: This key can be used to allow access to remote
ITS files
Reference: Win 2003 SP1, KB 896054
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x\ItssRestrictions
Value: UrlAllowList (string value) =
Value: MaxAllowedZone (string value) = 3
Value: NestedProtocolList (string value) =
-> Report: Settings reported for information only.
For HH Registry Info See:
http://helpware.net/htmlhelp/hh_info.htm#hh14
HTML Help 1.x Workshop Components
*** HH Workshop not found or not installed correctly. Try
reinstalling.
File not found: C:\Program Files\itcc.dll
File Found: C:\WINDOWS\system32\hha.dll (Version:
4.74.8702.0)
KeyHelp OCX by Keyworks.net - KeyHelp.ocx
This is for information only. KeyHelp is a 3rd party DLL.
*** KeyHelp.ocx is not registered or not installed!
*** You can register your KeyHelp.ocx using the "Register a
DLL" button.
*** KeyHelp.ocx could be installed anywhere on your PC by
normally resides in the Windows System folder.
For More Info See:
http://keyworks.net/
RoboHelp DLL by eHelp/Macromedia - HHActiveX.dll
This is for information only. HHActiveX is a 3rd party DLL.
*** HHActiveX.dll is not registered or not installed!
*** You can register your HHActiveX.dll using the "Register
DLL..." button.
*** HHActiveX.dll could be installed anywhere on your PC.
For More Info See:
http://www.macromedia.com/
MS Help 2 Run-time Components
*** MS Help 2 NOT installed on this PC

How do I delete files found by Searching "This Mac"?

I am trying to get rid of the .xmp files that the PC version on ACDsee put in my files. I did a search and found 10,000 of these pest on my new iMac with
Searching "This Mac". I am able to select them all in that window, but there is not an option to delete them. I tried dragging them to the trash.
I realize these are in many folders on my computer. Is there an easy way to get rid of them all at one time? If not what would be the quickest
way to get rid of them? All help will be greatly appreciated.
Thanks so much,
Jan

I disconnected my EHD and now it is letting me select them(dragging my mouse over about a 1000 at a time) and throw them in the trash. It must have found
some on the EHD, which I am going to wipe clean anyway after my files are moved over. I'll just check daily for new ones. Hope is is really deleting them from all those files. Over 6000 without the EHD.
Jan

Numbers found in Search

Similar Messages

Maybe you are looking for