Numbers, fractions, and code instead of text???

The links to click on in a widget are in numbers , fractions, or code instead of normal text? I dont know how to fix this!!!!!Can someone please help me out and tell me how to fix this problem with some of my widgets??

Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
Safe mode is much slower to start up than normal.
When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t start in safe mode. In that case, ask for instructions.
If there's no improvement, see below.
If you don't already have a current backup, back up all data. There are ways to back up a computer that isn't fully functional. Ask if you need guidance. You can skip this step if you don't care about the data that hasn't been backed up.
Reinstall the OS.* Your data should be unaffected unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Similar Messages

When I click "edit" to manage content on a web page, I see code instead of text and images. How can I fix this?

I edit content on www.fomh.org. Until recently, I could sign in as administrator, click "edit" in the editable area of a web page, and proceed to update text and images. I have been using Firefox to do this for several years. Now when I attempt to do this, I see all the html code in the editable area instead of the text and images.
I am using Mac OS 10.6.8

What is the content of that window?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

On job application sites, when I submit, a window opens in encrypted code instead of text. How do I change this to allow the window to display text?

On the various steps to an online job application, when I click on submit, instead of a window with a text file popping up a window pops up with html or computer coding instead of text. How do I change this so I can properly utilize these site processes. I looked for the setting that allows both html and text and it is set to do so.

What is the content of that window?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Strange code instead of text

Hi everyone,
My Mac recently had to be restored from Time machine after failing to boot and saying it had errors in the disk utility mode.
Time machine restoration seems to have all worked fine with one exception:
Whenever one of the little boxes that normally asks you a question and requires you to click on a button to make a choice - instead of the text asking the question (such as 'Do you want to replace files' etc - it now just has some weird codes such as 'PW32' 'CP4' 'PW3' below:
The top of the finder window also looks like this, with codes starting 'TL' shown below.
Any ideas if I can fix this?

Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
Safe mode is much slower to start up than normal.
When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t start in safe mode. In that case, ask for instructions.
If there's no improvement, see below.
If you don't already have a current backup, back up all data. There are ways to back up a computer that isn't fully functional. Ask if you need guidance. You can skip this step if you don't care about the data that hasn't been backed up.
Reinstall the OS.* Your data should be unaffected unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Reader X prints codes instead of text

I just upgraded to adobe X and when I try to print multiple copies of a form the first one or two come out fine and then the rest of them come out all garbled up. Anyone know how to fix this or to roll back to the previous version of adobe?

This sounds like a printer driver problem.
I think you use a PCL 5 or PCL XL driver that has problems to process the data correctly.
Try the option "Print as Image" under File > Print > Advanced.

I am getting strange numeric symbols or tiles instead of text when using Firefox. Repeated reloads and virus scans have not fixed it. I can't find a patch. Help! I hate IE!

Each time I open Firefox, I get blocks or tiles of numbers for each character instead of text. The tiles appear as composites of four digits, stacked two by two. At some websites, normal text does appear in boxes but mostly as this numeric gibberish. The functionality of the Firefox software does not seem to have been affected. But if I can't read it, I can't use it.

Try to set the pref gfx.font_rendering.directwrite.use_gdi_table_loading to false on the about:config page.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

Why am i getting fractions instead of text on some webpages?

i'm getting fractions/mathematical sentences instead of text of some webpages. after reading another post with a similar problem. i did what they said would solve the problem, getting rid of the fonts Helvetica Fractions and Times Phonetic. that didn't work.
i got rid of those fonts. searched thru my hard drive to make sure there weren't other copies of those fonts on my system, but the fractions still show up on some webpages.
i restarted after trashing the fonts and did a disk permissions repair. anything else i need to do?

tom, i'll email you with a screen shot.
It's helvetica fractions or something similar.
when i went
to the fontfinagler download site, the example of
garbled text was different from what i am
experiencing.
That's irrelevant. The point is that your machine may still think you have helvetica fractions because it is still in the caches. Clean them.
by the way, firefox works fine.
This font substitution problem normally only affects Apple Cocoa apps like Safari, Mail, Address Book, etc.

Printer is asking for an user acces code instead of windows login and password?

I have been seeing the HP printers asking(LaserJet M4555 MFP, LaserJet 500 color MFP M575 etc) for user access code instead of windows login and password.
One thing i have noticed is that when this happens there is a slight change in the EWS page configuration at security -> access control.The device administrator tabe is unchecked as you can see below ehen this happens
Have tried cold resetting the printer and restore facory settings but this does not works and some thimes it does works for a while but the issue is returing back.
We do not need this access code promt instead we need the usual windows login and password that used be there originally.
alsothis is how the settings look like after a cold reset somtimes when it does not asks for user access code , the problem is cold rese does lways works and it reverts back ois original settings

@munish259272
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

How do I change email so pictures appear instead of links and code

how do I change email settings so pictures appear instead of links and code?
Also how do I change settings to get .doc attachments instead of win.dat attachments?

I advise you to look at your code and ask yourself if it's efficient. What is you wan to add a few numbers to your program? You'll have to add a lot of lines of code.
Ah well, here's the answer to your question (partially):
double sum = (one+two+three+four+five+six+seven+eight+nine+ten+eleven+twelve+thirteen);
double mean = (sum / 13);
//...

I have a A4 document (569 pages) and within that A4 there are few A3's. Is there a way to isolate the A3's or find out what page numbers are A3's instead of scrolling through all the 569 pages???

I have a A4 document (569 pages) and within that A4 there are few A3's. Is there a way to isolate the A3's or find out what page numbers are A3's instead of scrolling through all the 569 pages???

thank you for the info... however I'm done buying pdf readers.... I've got three now, that should suffice.
I don't think there's a problem such as you mentioned because the pages are all similar : text and drawings. Some of the pages with drawings work, other similar pages don't.
I converted with Calibre to epub format and this seems to work !!!
So good so far...
Now I need to find a conversion to pdf to allow me to use goodreader or iannotate.
Basically... the text is ok, because a conversion allows reading. So a shortcoming by Apple in my opinion. Again, all pdf's should be readable on such an expensive tool !!!

The bullet list, numbered list and the normal text is not converting when I am converting from RH 9 to MS Word 2010

Hi all,
Greetings for the day
I am created a new CSS in Robohelp 9. I have also created a new template in Word 2010. The style sets for different information elements like (Heading, bullets, body text, ) are more or less same between the CSS and the new templates. I am also able to map the .css styles to Word template when I am converting from RH to Word as I am getting the necessary option in the drop-down list.
However, when the output is generated, the bullet, the numbered list and the body text is not converting at all. The body text works sometimes. However, the numbered list and bullet list is coming out as images.
If anybody knows the solution, I can share the .css and Word template.
Thanks in advance.
Regards,
Parag Deb

Create a new project with two or three topics containing lists of both types. Generate a printed output that shows the problem. Then zip it up and send it to me. See the Contact page on my site for instructions.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

That is because you don't have a web server configured and running to serve the html page. In order to see the page in a browser you need to access it using a url similar to http://localhost/~yourUserName if you are serving the page from your user account.
Prior to Mountain Lion you could go into web sharing and turn on the web server. With Mountain Lion there is no option, other than using terminal, to turn on the web server. The web sharing menu item has been removed in Mountain Lion. Apache is still on your computer but it will take a little searching these forums or the Internet to find how to turn it on.
If you want a graphic user interface to turn on/off the Apache server you could download and install a server application like xampp, http://www.apachefriends.org/en/xampp.html. I use this and it works well.

Uploaded pdf-documents generates code instead of pages in firefox and chrome (however they work in safari)

this is a new problem after having upgraded to mountain lion.
when I attach a hyperlink to my pdf-document that I like to display on the web - the pdf-document will not show up in Firefox or Chrome - it generates a lot of code instead.
I have only uploaded the files to my computer (not released on the web yet) - as I can see all files are neatly displayed in the appropriate pagefolder.
One of the themes (modern) provided as a standard feature in iWeb has been used. In Chrome the menu does not show up either (although safari and firefox displays the menu correctly)

I should have given you some info about testing the local version of your site. As you probably realise, its almost useless testing your site in Safari since hardly anybody uses it.
In OS X up to Snow Leopard, we could set up Web Sharing from System Prefs but Apple made this difficult in Mountain Lion.
See the bottom of this page for info about testing the local version of your website...
http://www.iwebformusicians.com/iWeb/mountain-lion.html

Switched from iPhone to Android and now iMessage being sent instead of Text

A friend of mine recently switched from iPhone to Android and now my text are being sent as iMessage instead of text and he obviously isn't receiving it. How do I fix this bug. I'm using iPhone 4 running iOS 5

I apologize about the odd style but I'm using voice rec software. I just got the Galaxy S five and I have this problem too after weeks of searching online I finally figured out the problem it is with iMessage even if you have your old phones imessage switched off. you have to get your friends to text you normally and send. If the text bubble shows up blue, press and hold choose option send as SMS or text and the bubble will change to green green means SMS blue is the iMessage so its up to the iPhone user to take literally a half of an extra step to send a text to you and if they don't do that then they're just jerks

Numbers, fractions, and code instead of text???

Similar Messages

Maybe you are looking for