Numbers Gridline Problem

How do I get NUMBERS to replace missing gridlines in part of a spreadsheet? Copying to a new blank sheet or to an Excel sheet
doesn't work.

Hi Peggy,
There are a couple of places you can go to manage gridlines.
Here with the table or row or column or cell selected you can change things including choosing "default" under the line popup.
Here you can select/deselect gridlines or even choose a style for the whole table.
quinn

Similar Messages

Numbers sorting problem

I know that this problem may have been asked before but I searched and could not find a similar situation.
I have a spreadsheet that will not sort the contents of a cell correctly. As an example, the table has two columns, the first is formatted as a date, the second as text data. I enter dates in random order and just put a, b, c, d etc in order in the second column. Selecting one cell in the second column, I add background color and a black line border.
When I sort using the date column, the color background moves with the letter but the black border stays at the original cell address.
Is this a bug, or have I missed a setting somewhere?

Yes, it does do that. Without documentation saying what it is supposed to do, it isn't proper to call it a bug. Maybe that was an intended result. Seems kind of strange to move the fill color but not the borders but I can think of examples where you might want it that way, or the opposite way, or for both to move or neither to move.
Edit: I note that Excel 2008 does the same thing. Therefore it makes it very difficult to call it a bug. I do not know if Excel has any settings to change that behavior. To my knowledge, Numbers does not.
Message was edited by: Badunit

Numbers formula problem

I have the following numbers, 20 in total. Numbers are from 0-9.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
3 7 8 1 2 6 6 7 3 1   0   7   0   1   2    2   1   6   8   2
i have another row where I want to put all the numbers that exist in the row 2. numbers that do not appear in that row should not appear in my other row.
But i just want to display the numbers once. The result would be like this:
0 1 2 3 6 7 8
Each number in a different cell.
4,5 and 9 do not appear.
I Hope you could understand my problem. I could post a screenshot, but this forum is buggy.
many thanks,

Splitting a series of data into more than one column or row complicates life. But if it is important to do that (perhaps for ease of data entry) then here is one way to accomplish what I understand you are looking for:
This is the sample data table (I reduced the number of columns for demonstration purposes):
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
DATA 1
16
15
17
16
19
17
16
16
16
18
15
14
14
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
DATA 2
11
9
12
10
12
14
13
11
12
14
15
13
14
15
18
Then you can create a "Helper Table" that looks like this (in practice it will have many more rows):
Value
Distinct
Ranked
DATA 1
DATA 1
9
16
16
10
15
15
11
17
17
12
16
13
19
19
14
17
15
The formula in A2 of the Helper Table, copied down as far as you can go until you get a red triangle range error is, is:
   =INDEX(UNION.RANGES(FALSE,Data::$A$1,Data::$2,Data::$4),1,ROW())
          (The $2 and $4 appear in this pasted formula means to anchor to those rows. You get that by clicking the row number to select the row)
The formula in B2, copied down, is:
   =IFERROR(IF(COUNTIF(A$1:A2,A2)=1,A2,""),"")
The formula in C2, copied down, is:
    =IFERROR(SMALL(B,ROW()−1),"")
    (The B here is the column B address token which you get by clicking the column letter to select the column.)
Your summary table would look something like this:
Durchmesser
9
10
11
12
13
14
15
16
17
18
19
The formula in B2, copied right until you get a blank, is:
   =IFERROR(INDEX(Helper Table::$C,COLUMN()),"")
SG

Numbers filtering problem

Hi guys,
I have a problem with numbers' filtering function here.
1. I have a table of about 150 rows and 6 columns.
2. The data consists about 42 categories and I wish to sort out each item.
3. when I chose the column and try to filter the table, I found there list only about 22 items on the pop-up list.
where are those missing items ?
Could someone help me with this?
Mike

2. The data consists about 42 categories and I wish to sort out each item.
3. when I chose the column and try to filter the table, I found there list only about 22 items on the pop-up list.
Though the pop-up (or drop-down or whatever it's called) list maxes out at only 22 or so items, you can work with larger numbers in the Sort & Filter panel at the right.
SG

Numbers search problem

I have Numbers 08, OX, the search works some of the time but will suddenly quit. The other day I was searching books by a certain author, to compare to a list of her books, trying to figure out which ones I had not read. (yes, I keep a log of the books I have read). For instance, I had searched & found a book, then searched for another, no find. Yet, when I looked at the one before, I see the one I searched for a few lines below. I tried other searches that should have landed on books but nothing happened. I quit Numbers & then checked it again, nada. It is working today...did it just need a reboot of Mac? I really can't imagine software that requires that. Oh yes, there were about 30 books that I searched.
Thanks for your help in solving my problem in Numbers.

I have Numbers 08, OX, the search works some of the time but will suddenly quit. The other day I was searching books by a certain author, to compare to a list of her books, trying to figure out which ones I had not read. (yes, I keep a log of the books I have read). For instance, I had searched & found a book, then searched for another, no find. Yet, when I looked at the one before, I see the one I searched for a few lines below. I tried other searches that should have landed on books but nothing happened. I quit Numbers & then checked it again, nada. It is working today...did it just need a reboot of Mac? I really can't imagine software that requires that. Oh yes, there were about 30 books that I searched.
Thanks for your help in solving my problem in Numbers.

HT1338 OS X Numbers Update Problem...

OS X Version 10.9.1 on 27" late 2009 iMac.
App store Updates, shows 'Numbers' updated to v3.0.1 , but version 2.3 was not removed.
What would be the problem, and how do I remove version 2.3 'Numbers' ...?

Yes, it's possible it could be the RAM. To test that theory out, pull 1 stick out. This will leave you with 2GB RAM. Try to install Lion as you were. If you still get the panic, then swap RAM sticks. Try again. If you are still getting panics, then it is likely something else, unless both of your RAM sticks are bad, which is unlikely but possible i suppose.

Pages numbers paiste problem

Unlike prior versions of Pages and Numbers when paisting Numbers cells into 5.01 Pages the cells loose formating requiring manual expansion. Cells only paist into 1 page then disapear disregarding page breaks. This problem has rendered both applications unusable for my contract preperation.

Apple has removed over 90 features from Pages 5, and similarly many from Numbers 4.
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages/Numbers '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5/Numbers 4, after Exporting your files to older versions or Word or Excel, and rate/review them in the App Store, then get back to work.
Peter

Large numbers calculation problem (determinant calculation)

Hello experts,
I have really interesting problem. I am calculatig determinant in ABAP with a large numbers (in CRM 5.0 system).
My formula for determinant is :
FORM calculate_determinant USING    det      TYPE zsppo_determinant
                           CHANGING value    TYPE f .
value =
    ( 1 * det-a11 * det-a22 * det-a33 * det-a44 ) + ( -1 * det-a11 * det-a22 * det-a34 * det-a43 ) +
    ( -1 * det-a11 * det-a23 * det-a32 * det-a44 ) + ( 1 * det-a11 * det-a23 * det-a34 * det-a42 ) +
    ( -1 * det-a11 * det-a24 * det-a33 * det-a42 ) + ( 1 * det-a11 * det-a24 * det-a32 * det-a43 ) +
    ( -1 * det-a12 * det-a21 * det-a33 * det-a44 ) + ( 1 * det-a12 * det-a21 * det-a34 * det-a43 ) +
    ( 1 * det-a12 * det-a23 * det-a31 * det-a44 ) + ( -1 * det-a12 * det-a23 * det-a34 * det-a41 ) +
    ( -1 * det-a12 * det-a24 * det-a31 * det-a43 ) + ( 1 * det-a12 * det-a24 * det-a33 * det-a41 ) +
    ( 1 * det-a13 * det-a21 * det-a32 * det-a44 ) + ( -1 * det-a13 * det-a21 * det-a34 * det-a42 ) +
    ( -1 * det-a13 * det-a22 * det-a31 * det-a44 ) + ( 1 * det-a13 * det-a22 * det-a34 * det-a41 ) +
    ( 1 * det-a13 * det-a24 * det-a31 * det-a42 ) + ( -1 * det-a13 * det-a24 * det-a32 * det-a41 ) +
    ( -1 * det-a14 * det-a21 * det-a32 * det-a43 ) + ( 1 * det-a14 * det-a21 * det-a33 * det-a42 ) +
    ( 1 * det-a14 * det-a22 * det-a31 * det-a43 ) + ( -1 * det-a14 * det-a22 * det-a33 * det-a41 ) +
    ( -1 * det-a14 * det-a23 * det-a31 * det-a42 ) + ( 1 * det-a14 * det-a23 * det-a32 * det-a41 )
ENDFORM.
Det values are also f type. Problem is, that for several numbers I got the right values and for another det values I got wrong values... I also try to retype variable value on type p, but without success. Maybe I used wrong types or there is some ABAP rounding of numbers which cause wrong result.
Any good ideas of solutions. <text removed>. Thanks for your time.
Edited by: Matt on Sep 14, 2010 9:17 AM

Hi Lubos,
phew! that sounds far from SAP scope, but from Maths' numerical methods. Let's see if I can remember something about my lessons at University...
- One issue can arise when adding and subtracting terms which are very similar, because the error tends to arise quite fast. Try to add the positive terms on one hand, and the negative terms on the other hand, then subtract one from the other.
- Please take into account that the determinant value can be significantly close to zero when the condition number of the matrix is low, that is, when the range is 4 but the whole determinant is close to 0. Instead, try a [Singular Value Decomposition|http://en.wikipedia.org/wiki/SVD_(mathematics)] or an [LU decomposition|http://en.wikipedia.org/wiki/LU_decomposition]
I hope this helps. Kind regards,
Alvaro

Numbers a problem with iSO 6

My numbers app formula input no longer works with iOS6
How do I correct problem?

If you would show us the whole ULOG message, we would be able to see which process
generated this message. Usually it is harmless, if two cleanupsrvs or two
tmadmins are run at the same time.
Scott Orshan
Sebastian Correa wrote:
Hello masters, I have the following problem:
I have Tuxedo running under SunOS 5.5.1, I connect this Tuxedo with another Domain
Tuxedo, running under OSS-Tandem (NonStop Tuxedo), For three days I didn't have
problems but today the following message appears in the Tuxedo under Sun log:
TUXEDO Version 6.5 SunOS 5.5.1 Generic_103640-29 sun4u sparc SUNW,Ultra-1.
LIBTUX_CAT:577: ERROR: Unable to register because the slot is already owned by
another process
Anything can help me??
Thanks.

Numbers format problem

i select 1 cell slide right to select 3 cells. Moving over the second cell it selects a block of cells i don't want, how do i rectify this problem so as i only select the 3 cells i want?

Hi rr,
I've copied your second post into your first post to keep the thread intact.
rrandrr
26/01/2013 4:15 PM
Thanks to previous replys but they don't seem to be solving my problem. probably because Im not describing my problem correctly.
I dont want to remove the data in the cells mentioned..
E.G I want to select G1,H1,I3 cells. When I try to select them, in anyway ive tried, as i select H1 it auto selects a block of cells B123 to I123 inclusive. I been playing whith this sheet for ages & think I may have formatted those cells in some way. I need to unformat that group so as i can select only the 3 I want. Any suggestion now that i've explained it that way? Thanks in anticipation.
I meant to mention I'm on Desktop Mac, OS X Version 10.7.5, Numbers '09 Version 2.3(554).
numbers
Hi again,
I see what you mean.
I'll have a think about it.
Ian.

Numbering series problem

Hi ALL
One of my client wants a solution . In the time of sales when we create sales invoice we wants 2 numbering series one for tax invoice another is for sales invoice . problem is that tax invoice Number should be start at 1 doc number and sales invoice number also should be start at 1 number.
How can we do this in sap business one .
thanks in advance
regard
Areeba Ali

Hi, Its no possible...
Yo u can maintain two number range in sales invoice.
that is you can maintain one number range 1 to 10000 for normal A R invoice
and another number range is 10001 to 20000 for tax type invoice numbering
But if u are passing a journal entry its easy to maintain multiple number range in a same series.
Regards,
Sanju M S

X axis gridline problem

When I used CFChart on coldfusion 6.1 the chart displayed the
xaxis grid properly i.e. it displayed all the results in each
category, put in a gridline, then showed the next category, put in
a gridline etc. Now however in Coldfusion 7 the gridline is
appearing in the middle of the category which is splitting up
results in the same category. Is there a way to get coldfusion 7 to
move the xaxis gridline?
Is there anywhere I can upload an image to better illustrate
the problem?

Hi the code for the chart is below. It might be a bit
confusing as it is looping through a list so that I can have
multiple staffmembers displayed on the one chart. It just seems
weird to me that it worked fine on CF 6 but shows different on CF
7.
Appreciate any help!
<cfchart format="png" chartwidth="698"
showxgridlines="yes" showborder="no" xaxistitle="Rating"
yaxistitle="No of Customers" show3d="no" sortxaxis="no"
gridlines="#mygridlines#" seriesplacement="cluster"
showlegend="yes" >
<cfset counterlist = 1 >
<cfloop list="#StaffList#" index="y">
<cfchartseries type="#newChartType#" serieslabel="#y#"
>
<cfloop list="Very poor, Could be better, Okay, Good,
Excellent" index="x">
<cfloop list="GetList" index="i">
<cfchartdata item="#x#"
value="#ListGetAt(Getlist,counterlist)#">
</cfloop>
<cfset counterlist = counterlist + 1>
</cfloop>
</cfchartseries>
</cfloop>
</cfchart>

Numbered still problem with Final Cut

Hi,
Please can anyone help me with this problem.
I have a sequential set of nnumbered still images that I would like to animate on the timeline, but whenever I move the stills to the timeline, it tells me that there is insufficient content to edit even with a set of numbered stills up to 450.
What must I do to overcome this. Thanks
Jome.

Hi. Thanks for all your responses.
My version is 5.0.4 and each still is one frame. The way I move them to the timeline is dragging all the frames straight on to the timeline. I also tried dragging to the monitor window and inserting but i still come up with the same error message.

Document numbering setup problem

Hi,
I am trying to setup my document numberings on my new database but when I go to that screen it doe snot show me any primary default numbering setup it just shows me the table names and a blank field. I tried to add the primary number it comes up with ovelap error msg.
I am running 8.81 PL 6 which has has a different numbering setup screen.
I run the numbering restore process and it did not fix it either. I do not know if this is the release issue or a bad database.
Tkx
Shawn

Hi Shawn,
Base on your description of the problem, it is more than likely the database issue.
To find the detail of the Document numbering , you may run query: SELECT * from ONNM and SELECT * from NNM1
Thanks,
Gordon

Numbers legend problem

i have a problem, actually i have two problems. my first thing is that i can't order a chart's legend to show in a vertical column.
I want this legend to be shown vertically, at the right side of my chart. I can't find any way to make this happen.
My second problem is with keynote. if my legend is shown vertically, i can't separate the values in it (CV, HR...) so if I want to use the Move in effect, the values would move in by pie wedge. Ex, first pie wedge move in, first legend value move in, and so on. I don't know i i was clear enough

On your first problem,
Select the legend. It will get resizing handles (little white squares) on each side
Grab one of those handles and make the legend less wide until it is all vertical
Move the legend to the right side of the pie
On your second problem, because the legend is a single object it moves in as a single object. You need to make the legend manually so each category label (with its colored circle) is a separate object. Then you can have the chart and legend move in as slice 1, legend 1, slice 2 , legend 2 ...

Numbers Gridline Problem

Similar Messages

Maybe you are looking for