Numbers legend problem

i have a problem, actually i have two problems. my first thing is that i can't order a chart's legend to show in a vertical column.
I want this legend to be shown vertically, at the right side of my chart. I can't find any way to make this happen.
My second problem is with keynote. if my legend is shown vertically, i can't separate the values in it (CV, HR...) so if I want to use the Move in effect, the values would move in by pie wedge. Ex, first pie wedge move in, first legend value move in, and so on. I don't know i i was clear enough

On your first problem,
Select the legend. It will get resizing handles (little white squares) on each side
Grab one of those handles and make the legend less wide until it is all vertical
Move the legend to the right side of the pie
On your second problem, because the legend is a single object it moves in as a single object. You need to make the legend manually so each category label (with its colored circle) is a separate object. Then you can have the chart and legend move in as slice 1, legend 1, slice 2 , legend 2 ...

Similar Messages

Flash Chart Legend Problem

Hi,
Im having a problem with my flash chart legends in Apex3.0.
I have changed the name of the Series to what i want to appear in my legend - however the legend just shows "Value" for all my Series.
Does anyone else have this problem?
Cheers,
Immanuel

Hello,
I need a legend like this
No of Clicks('000)
If i give l" No of Clicks('000)" as column alias, chart says Error :No chart data available.
If i give "No of Clicks('000')" or "No of Clicks(''000)" as column alias in the query, it displays the correct legend..
Would anybody tell me how to show the legend like this
No of Clicks('000)
Regards,
Archana

Bubble chart legend problem

Hello.
I have problem with bubble chart the problem is that in chart legend appear the same number of object what bubble in chart e.g. if chart have 5 bubble then legend also have 5 object.
What do I want to obtain is that in chart appear bubble which have different color (color depends on condition) and legend relate only colors. For example if chart have 4 bubble 3 - red and 1 - green then in legend appear only two position which relate green and red color (now appear 4 object three about red and one green).
Can any one tell me how to resolve this problem?

I already did this I added three condition (three colors red, green and yellow) in field "Value of" I choosed "is equal to" unfortunately it didn't help.
Maybe I joust try to describe what I want to show in this chart.
Suppose I have table with four columns u201Cdateu201D, u201Camount (number type)u201D, u201Csize (number type)u201D, u201Crisku201D (text type) now where this value appear on chart:
- date is x axis
- amount is y axis
- size is a bubble size
- risk will be bubble color
Now I have 3 kind of risk u201CLowu201D (green color), u201CMediumu201D (yellow color) and u201CHighu201D (red color).
Now in my data base I have table with record:
- u201C11-11-2009u201D, u201C1u201D, u201C2u201D, u201CMediumu201D
- u201C12-11-2009u201D, u201C2u201D, u201C1u201D, u201CMediumu201D
- u201C13-11-2009u201D, u201C1u201D, u201C1u201D, u201CHighu201D
- u201C14-11-2009u201D, u201C3u201D, u201C3u201D, u201CLowu201D
- u201C15-11-2009u201D, u201C1u201D, u201C1u201D, u201CLowu201D
Ok so now In My chart I should have 5 bubble and in legend three value (green, red, yellow) but in this case I always have five (the same number what record in table).
Sorry if this example is not clear.

Numbers sorting problem

I know that this problem may have been asked before but I searched and could not find a similar situation.
I have a spreadsheet that will not sort the contents of a cell correctly. As an example, the table has two columns, the first is formatted as a date, the second as text data. I enter dates in random order and just put a, b, c, d etc in order in the second column. Selecting one cell in the second column, I add background color and a black line border.
When I sort using the date column, the color background moves with the letter but the black border stays at the original cell address.
Is this a bug, or have I missed a setting somewhere?

Yes, it does do that. Without documentation saying what it is supposed to do, it isn't proper to call it a bug. Maybe that was an intended result. Seems kind of strange to move the fill color but not the borders but I can think of examples where you might want it that way, or the opposite way, or for both to move or neither to move.
Edit: I note that Excel 2008 does the same thing. Therefore it makes it very difficult to call it a bug. I do not know if Excel has any settings to change that behavior. To my knowledge, Numbers does not.
Message was edited by: Badunit

Numbers formula problem

I have the following numbers, 20 in total. Numbers are from 0-9.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
3 7 8 1 2 6 6 7 3 1   0   7   0   1   2    2   1   6   8   2
i have another row where I want to put all the numbers that exist in the row 2. numbers that do not appear in that row should not appear in my other row.
But i just want to display the numbers once. The result would be like this:
0 1 2 3 6 7 8
Each number in a different cell.
4,5 and 9 do not appear.
I Hope you could understand my problem. I could post a screenshot, but this forum is buggy.
many thanks,

Splitting a series of data into more than one column or row complicates life. But if it is important to do that (perhaps for ease of data entry) then here is one way to accomplish what I understand you are looking for:
This is the sample data table (I reduced the number of columns for demonstration purposes):
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
DATA 1
16
15
17
16
19
17
16
16
16
18
15
14
14
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
DATA 2
11
9
12
10
12
14
13
11
12
14
15
13
14
15
18
Then you can create a "Helper Table" that looks like this (in practice it will have many more rows):
Value
Distinct
Ranked
DATA 1
DATA 1
9
16
16
10
15
15
11
17
17
12
16
13
19
19
14
17
15
The formula in A2 of the Helper Table, copied down as far as you can go until you get a red triangle range error is, is:
   =INDEX(UNION.RANGES(FALSE,Data::$A$1,Data::$2,Data::$4),1,ROW())
          (The $2 and $4 appear in this pasted formula means to anchor to those rows. You get that by clicking the row number to select the row)
The formula in B2, copied down, is:
   =IFERROR(IF(COUNTIF(A$1:A2,A2)=1,A2,""),"")
The formula in C2, copied down, is:
    =IFERROR(SMALL(B,ROW()−1),"")
    (The B here is the column B address token which you get by clicking the column letter to select the column.)
Your summary table would look something like this:
Durchmesser
9
10
11
12
13
14
15
16
17
18
19
The formula in B2, copied right until you get a blank, is:
   =IFERROR(INDEX(Helper Table::$C,COLUMN()),"")
SG

Numbers filtering problem

Hi guys,
I have a problem with numbers' filtering function here.
1. I have a table of about 150 rows and 6 columns.
2. The data consists about 42 categories and I wish to sort out each item.
3. when I chose the column and try to filter the table, I found there list only about 22 items on the pop-up list.
where are those missing items ?
Could someone help me with this?
Mike

2. The data consists about 42 categories and I wish to sort out each item.
3. when I chose the column and try to filter the table, I found there list only about 22 items on the pop-up list.
Though the pop-up (or drop-down or whatever it's called) list maxes out at only 22 or so items, you can work with larger numbers in the Sort & Filter panel at the right.
SG

Numbers search problem

I have Numbers 08, OX, the search works some of the time but will suddenly quit. The other day I was searching books by a certain author, to compare to a list of her books, trying to figure out which ones I had not read. (yes, I keep a log of the books I have read). For instance, I had searched & found a book, then searched for another, no find. Yet, when I looked at the one before, I see the one I searched for a few lines below. I tried other searches that should have landed on books but nothing happened. I quit Numbers & then checked it again, nada. It is working today...did it just need a reboot of Mac? I really can't imagine software that requires that. Oh yes, there were about 30 books that I searched.
Thanks for your help in solving my problem in Numbers.

I have Numbers 08, OX, the search works some of the time but will suddenly quit. The other day I was searching books by a certain author, to compare to a list of her books, trying to figure out which ones I had not read. (yes, I keep a log of the books I have read). For instance, I had searched & found a book, then searched for another, no find. Yet, when I looked at the one before, I see the one I searched for a few lines below. I tried other searches that should have landed on books but nothing happened. I quit Numbers & then checked it again, nada. It is working today...did it just need a reboot of Mac? I really can't imagine software that requires that. Oh yes, there were about 30 books that I searched.
Thanks for your help in solving my problem in Numbers.

HT1338 OS X Numbers Update Problem...

OS X Version 10.9.1 on 27" late 2009 iMac.
App store Updates, shows 'Numbers' updated to v3.0.1 , but version 2.3 was not removed.
What would be the problem, and how do I remove version 2.3 'Numbers' ...?

Yes, it's possible it could be the RAM. To test that theory out, pull 1 stick out. This will leave you with 2GB RAM. Try to install Lion as you were. If you still get the panic, then swap RAM sticks. Try again. If you are still getting panics, then it is likely something else, unless both of your RAM sticks are bad, which is unlikely but possible i suppose.

Pages numbers paiste problem

Unlike prior versions of Pages and Numbers when paisting Numbers cells into 5.01 Pages the cells loose formating requiring manual expansion. Cells only paist into 1 page then disapear disregarding page breaks. This problem has rendered both applications unusable for my contract preperation.

Apple has removed over 90 features from Pages 5, and similarly many from Numbers 4.
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages/Numbers '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5/Numbers 4, after Exporting your files to older versions or Word or Excel, and rate/review them in the App Store, then get back to work.
Peter

Large numbers calculation problem (determinant calculation)

Hello experts,
I have really interesting problem. I am calculatig determinant in ABAP with a large numbers (in CRM 5.0 system).
My formula for determinant is :
FORM calculate_determinant USING    det      TYPE zsppo_determinant
                           CHANGING value    TYPE f .
value =
    ( 1 * det-a11 * det-a22 * det-a33 * det-a44 ) + ( -1 * det-a11 * det-a22 * det-a34 * det-a43 ) +
    ( -1 * det-a11 * det-a23 * det-a32 * det-a44 ) + ( 1 * det-a11 * det-a23 * det-a34 * det-a42 ) +
    ( -1 * det-a11 * det-a24 * det-a33 * det-a42 ) + ( 1 * det-a11 * det-a24 * det-a32 * det-a43 ) +
    ( -1 * det-a12 * det-a21 * det-a33 * det-a44 ) + ( 1 * det-a12 * det-a21 * det-a34 * det-a43 ) +
    ( 1 * det-a12 * det-a23 * det-a31 * det-a44 ) + ( -1 * det-a12 * det-a23 * det-a34 * det-a41 ) +
    ( -1 * det-a12 * det-a24 * det-a31 * det-a43 ) + ( 1 * det-a12 * det-a24 * det-a33 * det-a41 ) +
    ( 1 * det-a13 * det-a21 * det-a32 * det-a44 ) + ( -1 * det-a13 * det-a21 * det-a34 * det-a42 ) +
    ( -1 * det-a13 * det-a22 * det-a31 * det-a44 ) + ( 1 * det-a13 * det-a22 * det-a34 * det-a41 ) +
    ( 1 * det-a13 * det-a24 * det-a31 * det-a42 ) + ( -1 * det-a13 * det-a24 * det-a32 * det-a41 ) +
    ( -1 * det-a14 * det-a21 * det-a32 * det-a43 ) + ( 1 * det-a14 * det-a21 * det-a33 * det-a42 ) +
    ( 1 * det-a14 * det-a22 * det-a31 * det-a43 ) + ( -1 * det-a14 * det-a22 * det-a33 * det-a41 ) +
    ( -1 * det-a14 * det-a23 * det-a31 * det-a42 ) + ( 1 * det-a14 * det-a23 * det-a32 * det-a41 )
ENDFORM.
Det values are also f type. Problem is, that for several numbers I got the right values and for another det values I got wrong values... I also try to retype variable value on type p, but without success. Maybe I used wrong types or there is some ABAP rounding of numbers which cause wrong result.
Any good ideas of solutions. <text removed>. Thanks for your time.
Edited by: Matt on Sep 14, 2010 9:17 AM

Hi Lubos,
phew! that sounds far from SAP scope, but from Maths' numerical methods. Let's see if I can remember something about my lessons at University...
- One issue can arise when adding and subtracting terms which are very similar, because the error tends to arise quite fast. Try to add the positive terms on one hand, and the negative terms on the other hand, then subtract one from the other.
- Please take into account that the determinant value can be significantly close to zero when the condition number of the matrix is low, that is, when the range is 4 but the whole determinant is close to 0. Instead, try a [Singular Value Decomposition|http://en.wikipedia.org/wiki/SVD_(mathematics)] or an [LU decomposition|http://en.wikipedia.org/wiki/LU_decomposition]
I hope this helps. Kind regards,
Alvaro

Top 10 chart and legend problem

Post Author: training2go
CA Forum: Charts and Graphs
Hello,
I am using CR for Visual Studio 2005.I create a top 10 chart with a legend. The chart is in the group header 1b section and I'm using the underlay option so that the chart is to the right of the detail records.
The chart and legend have 2 problems:
1. The chart displays entries that are not in the detail records. The top 2 pie slices are for amounts not in the detail records or in the legend
2. The percents in the legend are not correct.The first 3 entries in the legend are:
$5,879.70 18.1%$5,219.55 16.1%$10,886.79 11.2%I would think that the $10K amount would have the largest percent and the $5879 nbr would have the lower percent.I've looked every place that I can think of to find out what is causing this, but I'm not having any luck.I also tried putting the chart in the group footer section, but the results are the same.I've also noticed this in CR XI. I don't know if I'm doing something wrong or if this is a bug.Any help would be greatly appreciated.Thank you.

Post Author: training2go
CA Forum: Charts and Graphs
I've still been trying to get this to work or at least figure out what I'm doig wrong, but so far I haven't had any luck, so I'm hoping someone can help me.

Bar graph legend problem

Hi I am using JDeveloper Studio Edition Version 11.1.1.3.0.
My problem is that I have made a bar graph inside an af:showDetailItem but the legends isn´t shown correct. I can´t see the legends at all when I place the legends in the bottom and if I place them in the right I can see half of the text. The source code is below. If someone can see something wrong in this code don´t hesitate to point it out or if someone know how to get this to work please let me know. To me it looks like a bug but I could be wrong.
<af:showDetailItem text="Søgulig gongd" id="sdi8"
stretchChildren="first">
<dvt:barGraph id="barGraph1"
value="#{bindings.TrxBrw360JLHistoryGraphRO1.graphModel}"
subType="BAR_VERT_STACK"
partialTriggers="::pc1:t1"
dynamicResize="DYNAMIC_SIZE">
<dvt:background>
<dvt:specialEffects/>
</dvt:background>
<dvt:graphPlotArea/>
<dvt:seriesSet>
<dvt:series/>
</dvt:seriesSet>
<dvt:o1Axis/>
<dvt:y1Axis/>
<dvt:legendArea automaticPlacement="AP_NEVER"
position="LAP_BOTTOM"/>
<dvt:o1Title id="o1Title1" text="Tíðarskeið"/>
<dvt:y1Title id="y1Title1" text="Upphædd"/>
</dvt:barGraph>
</af:showDetailItem>

Hi,
I stumpled accross this thread and fear I will hit the same problem with a new customer request.
Has a bug been filled for this?
Could not find anything relevant in metalink.
regards
Peter

Label and legend problem in grouped month data pie chart for Crystal XI

Post Author: mikeyplop
CA Forum: Charts and Graphs
Hi all, I have a problem with a pie chart I created based upon monthly figures that were grouped. The data type is DateTime but I have modified the report to show the date as January 2007, February 2007 etc. etc. This is all fine and appropriate as it is based on a gouping of all the data into months. However, when I chart the same data the labels and legend do not reflect this formatting. Instead they show up as 01/2007, 02/2007 etc. etc. I have searched the forums, but was unable to find any one else who has had the same problem. Any help would be greatly appreciated. Kind regards, Mikey

Post Author: training2go
CA Forum: Charts and Graphs
I've still been trying to get this to work or at least figure out what I'm doig wrong, but so far I haven't had any luck, so I'm hoping someone can help me.

Graph Legend problem

Hi all.
I am using Studio Edition Version 11.1.1.0.1 and got some problems with graph legend. I have a Pie chart and a bar graph which are made from the same read only view object and I can´t understand why the legend on them don´t show the same things when they are made from the same view object. The pie has a status attribute choosen as slices and the bar graph has the same status attribute choosen as bars and it is these things I thought decide what names are shown in the legend. The values for the status are shown in the legend names but the pie shows the legend names in the same order as the query in the view object while the the bar graph show them in the opposite order. How can I make them show the legend names in the same order?
Atlantic Viking

Hi,
I stumpled accross this thread and fear I will hit the same problem with a new customer request.
Has a bug been filled for this?
Could not find anything relevant in metalink.
regards
Peter

Numbers a problem with iSO 6

My numbers app formula input no longer works with iOS6
How do I correct problem?

If you would show us the whole ULOG message, we would be able to see which process
generated this message. Usually it is harmless, if two cleanupsrvs or two
tmadmins are run at the same time.
Scott Orshan
Sebastian Correa wrote:
Hello masters, I have the following problem:
I have Tuxedo running under SunOS 5.5.1, I connect this Tuxedo with another Domain
Tuxedo, running under OSS-Tandem (NonStop Tuxedo), For three days I didn't have
problems but today the following message appears in the Tuxedo under Sun log:
TUXEDO Version 6.5 SunOS 5.5.1 Generic_103640-29 sun4u sparc SUNW,Ultra-1.
LIBTUX_CAT:577: ERROR: Unable to register because the slot is already owned by
another process
Anything can help me??
Thanks.

Numbers legend problem

Similar Messages

Maybe you are looking for