Numbers missing from second half of printed document

Here is a mystery for you. I have converted my rather large help project to a very large Word document and then PDF. The interesting behavior I am seeing is that about halfway through the document the numbers and bullets have disappeared. We have put the numbers and bullets in the same throughout the project but in the second half of the document they are missing. They are in place in the first half of the document.
The project has been around since RoboHelp X.5 and is now in RoboHelp 8. The projects are intermixed with what release they were created in. The document is 2334 pages long and I lose numbering and bullets after page 1133.
Any ideas would be greatly appreciated.
Thanks,
Nita

Thank you Leon and Peter for your timely answers. The numbering and bullets do work when I break the document into smaller documents (it took three). The difficulty I am now facing is that if I try to combine those documents after generation, the numbers stop working again. The document has a TOC on the front so I wanted to combine them within Word to get the TOC accurate by updating - curses.
The only solution I've come up with so far, which is kind of awkward is:
Have RoboHelp generate the entire document in order to get the TOC
Generate the next two documents wiht just the smaller sections.
Delete the extra two sections from the first document.
PDF all three and combine.
This will break links that are between sections of the document and runs the risk of not the TOC not being accurate.
Can you think of a better way?
Thanks,
Nita

Similar Messages

Withholding tax certificates numbers missing from Table J_1IEWT_CERTIF_N

Experts,
I have followed all the process of Extended withholding tax and printed certificates in the month of Jan 2011 for the period Oct 2010 to Dec 2010. (actually for FY 2010)
Now I want to repirnt one of these certificates as duplicate certificate and need to gi ve it to my vendor. I have the hard copy of the certificate and the number. But when I go to certificate re print program, it shows me certificate does not exists. I have also checked the tables but few certificate numbers I cannot see in the table.
When I sorted the certificates I get certificates from sr. 1 to Sr.171 and then from Sr 286 to 341, whereas actually I had printed the certificates which are missing in between.
I aslo tried to print the certificates for those where I am geting certificate error, and there are system is allowing me to print the certifricate and not showing any message about certificates already printed. In the report J1INMIS as wel I do not get certificate number.
Kindly advise, what could be reason.
Shailesh

Hi
Give the T.Code J1ICREP to reprint the certificate. Give the certificate number and print it. The new print will come automatically as DUPLICATE.

Firefox icon went missing from save as complete web documents. How to fix it?

Mozilla firefox red ball icon has disappeared from 'save as documents since yesterday, saved in web style.
Instead there is some simple icon replacing it
solve my problem . I have windows XP professional and mozilla is latest 6.0.2

Hi muttleytm,
The official download is not bundled with the toolbar. [https://www.mozilla.org/en-US/firefox/new/]
Reset the printing settings/preferences with this :[[Fix printing problems in Firefox]] ]
And you can try to disable the toolbar temporarily or try safe mode if there are other add ons installed: [[Troubleshoot Firefox issues using Safe Mode]]

L10N: Why is implicit support for Thai numbers, missing from DateFormat

If a Locale happens to have different characters for representing numeric digits from 0 to 9, then the year received back from formatting a date shows the characters for the year in the localized form as well.
For example, the following code:
Locale hi_IN = new Locale("hi", "IN");
sdf=new SimpleDateFormat("yyyy", hi_IN);
rptDate=sdf.format(new Integer(2009));
sysout.println(rptDate);produces the following output:
१९६९But running the same code for th_TH locale produces 2552 which doesn't have the Thai digits applied to it and I think that it should really look like: ๒๕๑๒Perhaps this is more of a Localization (L10N) question rather than internationalization (I18N) so please feel free to point me to the correct forum.

You can specify "th_TH_TH" locale to display digits in Thai. For more detail, please take a look at
http://java.sun.com/javase/6/docs/technotes/guides/intl/calendar.doc.html
Naoto

New document about sequence presets and codecs missing from Premiere Pro

If you're having problems with sequence presets and codecs missing from Premiere Pro, see this document for solutions for this activation issue.
This document relates to the following problems:
- missing sequence presets when creating a new sequence
- Encore error: "Encore will not launch in non-royalty bearing mode. The application needs to be serialized with a royalty bearing serial number."
- When opening a project in Premiere Pro: "Error Adobe Premiere Pro: This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
- When importing footage, the footage is missing audio or video.
These failures are all because Premiere Pro and Encore use some codecs that require activation before they can be used. If activation of these codecs has failed, these codecs will not be available to use.

Well done.

FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

If you're having problems with sequence presets and codecs missing from Premiere Pro, see this document for solutions for this activation issue.
This document relates to the following problems:
missing sequence presets when creating a new sequence
Encore error: "Encore will not launch in non-royalty bearing mode. The application needs to be serialized with a royalty bearing serial number."
When opening a project in Premiere Pro: "Error Adobe Premiere Pro: This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
When importing footage, the footage is missing audio or video.
These failures are all because Premiere Pro and Encore use some codecs that require activation before they can be used. If activation of these codecs has failed, these codecs will not be available to use.

1. Deactivate
2. Uninstall everything Adobe
3. Run Clean Script CS4 2 or 3 times. Look here: http://kb2.adobe.com/cps/406/kb406241.html
4. Reinstall and activate
5. Update
Why did this happen? Because you have in the past used a trial version or your installation was faulty.

Did I miss something in the fine print? I installed Lion and and come to find out, I can no longer open any Word documents or Excel spreadsheets as they are no longer supported (being PowerPC apps). Seriously?!?!?!?!! What are my alternatives?

Did I miss something in the fine print? I installed Lion and and come to find out, I can no longer open any Word documents or Excel spreadsheets as they are no longer supported (apparently because they are PowerPC apps). Seriously?!?!?!?!! What are my alternatives?

Hi Mary and Matthew
You might find it helpful to "try before you buy" - there is a 30 day free trial offer for Office for Mac 2011, accessible from M's .com website.
You may be able to use this period to open and resave your old documents in a format that enables you to switch instead to using Apple's iWorks apps moving forward.
I initially intended to do something similar, but ended up buying Office as it provided an easier way (for me, at least) to continue working with years worth of old emails, letters, spreadsheets and other documents (from my PC days) without risking damage to their integrity, formatting, etc.

Why are my PDF files so big when I open them or when I print them out? I only see and print half of the document, didn't have any problem on internet explorer

I was trying to print something from the internet and when I did what came out was half of the document. What should have been printed in 1 sheet of paper was printed in 2 and it was only half of the document because the letters and images were too large.
I noticed that when I saved the document from the Internet to my folder the document was in half. I tried to save it again but it didn't work. I tried to fix the printer to see if that was the reason but still I continued to see only half of the document. I tried printing again but still the same thing happened.
I thought it was a problem with my printer but then I remembered that the same thing happened with other PDFs files. I then tried the same thing on Internet Explorer and when I saved the document I saved the whole document not only half of it and the letters and images where not large like when I used Mozilla. I was also able to print the whole document in 1 sheet of paper.
I don't how to solve this problem, thank you for your help and attention

Hi efacg,
Most printing issues are solved by resetting the Printing preferences. When you print from Firefox and you click on the down arrow, do you see Defualt and Firefox? Please make changes to the preferences here and preview the document.
If this continues to be an issue please also see [[Fix printing problems in Firefox]]
If there are any other questions, please do not hesitate to ask, we are here to help.

Missing pages in printed document

Some topics are missing in the printed document. What could be the reason for this? I have tried and tried but could not get those pages printed.

Welcome to the RH forums.
Perhaps you could give us some additional information which would help us here. What version of RH are you using? Is the problem only in one project or on one PC? Is it the same pages that are always missing? Are they always missing from the start, middle, end? That sort of thing.
For a start, check that you have included all the required pages correctly. Check out this link. Also check to see if you have any Conditional Build Tags that could be filtering out the topics you are expecting to see.
The RoboColum(n)
@robocolumn
Colum McAndrew

Walking Dead Season 4 second half now missing

Hi,
Earlier I had downloaded Season 4 episode 9 (the first episode of the second half) and watched it without issue. The following week I tried to download episode 10 but ran into Duplicate Transaction issues and eventually submitted refund application online on Feb 18 since I was charged for it. 2 days later both episode 9 and 10 are missing from BB World. If there are un resolvable issues with downloading the second half episodes will I get a refund for episode 10 which I was not able to watch? If this is resolvable is there any timeline available?
Cheers,
Eric

Ok, so today I see that the second half is back on BlackBerry world (Episode 9 and 10) but every time I try to download episode 10 I get the Duplicate Transaction message.
How do I get the file to download (I have already cleared the cache and tried changing storage from memory card to device and back)?
Cheers,
Eric

PPro CS4 - half of audio is missing from exported files

Hi all.
I'm currently working on a project in PPro CS4, and by that I mean that I've already completed the project. It was exported and uploaded to youtube for my boss, no problems. Then he asked me to combine the two videos, so I copied the second half of the video and pasted it onto the first half's sequence. The settings I used for the two sequences were the same. When I play the video in PPro everything works fine. When I export the video, however, the audio is missing from the second half of the video (the half I copied). The second half audio is on the same track as the first half of the audio, so the audio levels on the exported video should be exactly the same.
I've been browsing the forums and looking at troubleshooting pages but I still haven't found a solution to the problem. The video is intact; only the second half of the audio is missing. I have no idea why it's doing this or how to fix it.
I'd appreciate any input.
-RD

Yes, if he is exporting one file of video and audio then either the entire track is exported
or only the work area bar is exported for both video and audio. If he is exporting video and audio separately THEN they might be different lengths.
You might right-click the audio for the second section and select Audio to see if it is muted.
Try exporting the audio alone without video, listen to the audio in Windows Medica player and listen if all or only half of it exported. If all of it exported, then that narrows the problem.
You might try creating a new Sequence and pasting the video and audio into the new Sequence (don't just duplicate the sequence, that may just duplicate the problem). Then export and see if that circumvented the problem.
What format are you exporting to?

Friends need help desperate-- Second page not printing from the beginning

Hi Friends,
I have a large layout whose main-section is 8.5x20 (Width&height) which has 2 frames each having 2 repeating frames and about 20 fields in each repeating frame. When I run the report it shows the report right, but when I print, it prints only the first half since the report is long. When I change the property of the second frame of 'Page break before' to 'yes' it prints the second frame on the second page but print it at the same position as it printed on the first, and top of second page is all blank. How do I make to print from the beginning of the second page. Need your help.
Thanks
Joe.

Hello,
Most of the times, these problem are solved by "enclosing" the "Repeating frames" in frames with "Vertical Eleasticity" set to "Variable"
Regards

When I export an indesign document the graphics are missing from the eps file.

When I export an indesign document the graphics are missing from the eps file.

The why it isn't working can be a number of reasons. While I never have exported an EPS out of ID before, I just tried it and it worked fine.
What "graphics" are missing? I used bitmaps, native drawn ID vector, lines and a placed EPS file. Came into AI as an opened EPS fine.
Links up to date? For items not hitting the EPS, are they on a layer set to non-printing?
In the export dialog,General tab, PostScript Level 3? Data format set to ASCII? On the Advanced tab, Send Data set to All? OPI off?

HT201210 After downloading latest version of iTunes it will not open. This error message is displayed; The program can't star because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. Then a second error box

After iTunes requested that I download latest version on PC it now will not open. 2 error messages appear. first: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. second: iTunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 126). I have tried reinstalling a number of times and restarting computer but no luck.

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

How do I get my Kodak ESP 3.2s printer to print documents from my iPad ?

I have an iPad
I have a Kodak ESP 3.2s all in one printer
I have set it up to print via my home wi fi using my normal laptop with Microsoft
However I couldn't work out how to print from my iPad as its not configured for Apple!
I downloaded Kodak Pic flick HD app
This means I can now print photos from my iPad! Great
But still can't print documents it seems I get a message saying No AirPrint Printers Found
Any advice very welcome
Thank you
iknow0

Airprint is a technology created by Apple Inc. and introduced in iOS 4.0 that allowed iPads, iPhones, and iPod Touches to print directly to Airprint compatible printers. Unlike computer printing where the drivers, fonts, etc. are stored on the computer and sent to the printer with the document with Airprint fonts, drivers, etc. are stored on the printer and need not be sent with the document.
The solution to your problem is 3rd party software which both Jim and I suggested to you.

Numbers missing from second half of printed document

Similar Messages

Maybe you are looking for