Numbers Not Responding When Adding New Sheet
As you may have surmised from the title, Numbers is crashing every time I (attempt to) add a new sheet. This is only happening on one of my computers; the others seem OK.
I got this version via the App Store and was wondering whether it'll be OK to delete my version and re-install.
Thanks in advance for advice...
Hi Adam,
I wouldn't surmise that at all from your subject line—crashing is, after all, a response.
While reinstalling might solve the issue, I doubt that it is a necessary step. Does Numbers exhibit the same response if you open it (on the same computer) using a different User Account?
If not, then the most likely culprit is a corrupted preferences file.
In the Finder (and logged on with the account where the issue exists), press and hold the option key, go to the Go menu, and choose Library.
In Library, open Preferences, and locate the file com.apple.iWork.Numbers.plist
Drag this file to the desktop (or the Trash), the relaunch Numbers and try adding a sheet to a Numbers document.
If successful, trash the old preferences file and carry on.
Regards,
Barry
Similar Messages
-
InDesign 6 not responding when adding new pages
Hi folks,
I'm having a continuing problem that sees InDesign 6 "not responding" every time I try to add a new page or duplicate a spread on a document I'm working on.
This doesn't seem to be a problem on a new document - only on my working file, which is due at the printer tomorrow!!
Can anyone offer any advice as to what the problem may be.
Typically, I need an answer ASAP.
many thanks
PeterTry exporting to .idml and working with that. See Remove minor corruption by exporting
-
Can iOS Numbers copy formulas when adding new rows?
iOS Numbers table add row is not copying previous cell formulas. Is this supported or not?
I have a table with lots of columns and all of them have formulas. When I click at the lower left of the table to add a row, none of the new cells have the formulas. I have to manually go through every column and copy the formulas to the new row.
This is not very practical if you're planning to use Numbers on the go with an iPad. In my case, I have to quickly get a new row ready as needed. I was hoping there is a preference setting somewhere like "copy formulas when adding new row".I had the same issue with the added twist that I wanted to reference the created cells in formulas in other sheets. This is what works for me:
I use a form to enter data. The referenced sheet is set up like this:
1 Name Date ServPayment SalesPayment Total
2 Week1 =sum (ServPayment,SalesPayment)
3 =sum (ServPayment,SalesPayment)
4 TotWeek1 =sum (Total2,Total3)
"Total" sums the 2 Payments, TotWeek1 sums the totals.
In the entry form I never add data to the empty line. In this example, I would start at "Week1" and tap the "+" to add a new form. This creates the line in the referenced sheet with my formulas. As I continue, I always start at the last entry I have made and tap "+".
When I create a line that does not have the formula on either side, I do not get the formula.
Hope this helps. -
Application not responding when brand new iPhone 4S is plugged in...
My iTunes (10.6.1) is not responding when I plug in my brand new iPhone 4S.
I am getting the little rainbow wheel of death and nothing work. Had to force quit about 20 times today.
Had to sync my Calendar, Mail and Contact via mobile me but need my apps!!! Please help. I have a Macbook with OS X (10.7.4).
I had a look around the support communities but couldn't find anything...If brand new take it to an Apple Retail store Genius Bar
-
It's not responding when opening new projects
My FCPX isn't responding when I'm trying to create and edit a new project. I just bought this tonight and it's giving me the beach ball and not responding. What is going on?
And now I tried to open a link from an email, and the same fucking problem.
6/16/14 7:02:13 PM kernel Data/Stack execution not permitted: firefox[pid 549] at virtual address 0x160913000, protections were read-write
6/16/14 7:02:14 PM kernel Data/Stack execution not permitted: firefox[pid 549] at virtual address 0x160913000, protections were read-write
6/16/14 7:02:18 PM kernel Data/Stack execution not permitted: firefox[pid 549] at virtual address 0x160914000, protections were read-write
6/16/14 7:02:19 PM kernel Data/Stack execution not permitted: firefox[pid 549] at virtual address 0x160914000, protections were read-write
6/16/14 7:02:20 PM kernel Data/Stack execution not permitted: firefox[pid 549] at virtual address 0x160914000, protections were read-write
6/16/14 7:02:25 PM kernel Data/Stack execution not permitted: firefox[pid 549] at virtual address 0x160914000, protections were read-write
6/16/14 7:02:26 PM kernel Data/Stack execution not permitted: firefox[pid 549] at virtual address 0x160914000, protections were read-write
6/16/14 7:02:31 PM kernel Data/Stack execution not permitted: firefox[pid 549] at virtual address 0x160914000, protections were read-write
6/16/14 7:02:32 PM kernel Data/Stack execution not permitted: firefox[pid 549] at virtual address 0x160914000, protections were read-write -
Why is OD Server not responding when added to authentication search policy?
Howdy All,
I'm using Mac OS X Server (10.5.6) to connect to an LDAP server in the organisation (not sure what it is running on). The Mac is not running as a master or mirror just a client.
When I configure the connection to the LDAP server in Directory Utility it says "This server is responding normally. This server is not in your authentication search policy." That's ok.
Whowever, when I add the connection to the authentication (or contacts) search policy in Directory Utility is says "This server is not responding."
What would this specifically indicate? This machine is not allowed to connect? The mapping is incorrect? There is some sort of mismatch between client and server?
Others have used Macs to connect to this LDAP server. I've followed their specific configuration suggestions. I've also tried turning off/on the firewall, DNS server, etc.
Thanks for any assistance.
Cheers,
Ashley.Hi Jeff,
Thanks for your post. That said, I'm not sure how you got the impression that I wish to go to Maine I'm happy here in Perth, Western Australia.
Jeff Kelleher wrote:
Connecting a Mac to an LDAP server is a far cry from connecting a OS X Server to an existing LDAP server. Not that I could necessarily help, but asking how to connect an OS X Server to an LDAP server is a bit like asking "guess where I am now, how do I get to Maine?"
You need to provide as much info as you can.
Seriously though, I'm not sure of the difference. I am using Directory Utility to allow this OS X Server to get authentication information from an LDAP server just like an OS X Client would.
I have Open Directory in Server Admin just setup to connect to a directory system (i.e. the organisation LDAP server), not a master or replica.
My final goal is to allow access to an OS X TeamsServer Wiki by users who are authenticated against the LDAP server (rather than having to have separate accounts, logins, on the OSXS.)
I am hoping that I can use a group from the LDAP server to define the team, but perhaps I will have to run a standalone OD. I hope then I can add LDAP users to the OD group.
What other information would help?
Thanks,
Ashley.
OS X Server 10.5.6 -
FCPX not responding when creating new project
My FCPX isn't responding when I'm trying to create and edit a new project. I can create a new event, import a video in but if I try to play it or create a new project to drop it into it stops responding and all I see is the beachball twirling. I need suggestions and fast. Already erased FCP preferences, did the purge script and repaired disk permissions in case it was a RAM issue. No other programs seem to be having an issue.. and I've been using FCPX just fine for 8 months..HELP
Final Cut Pro X, Mac OS X (10.8.5)Try these general troubleshooting strategies.
Use this free app to trash the preferences even if you have already done it. This should be the first thing you try when any problems occur.
http://www.digitalrebellion.com/prefman/
Shutdown FCP X before you do it.
2. Trash Layouts folder. With FCP X shutdown, hold down option key and select Go>Library>Application Support>Final Cut Pro . . . trash the Layouts Folder.
3. Open Disk Utility and Repair Permissions.
4. Trash FCP X using this free app and reinstall it.
http://www.digitalrebellion.com/fcsremover/
5. If these 4 measures don't work, create a new User Account (Admin) in System Preferences and try running FCP X from that as it sometimes works miracles. -
ITunes Music Library.xml not updating when adding new songs
I have about 150.000 music tracks on my iMac and iTunes didnt have any difficulty with it. When using the songs in DJ program Native Instruments Traktor Pro, this program checked the latest update of the iTunes Music Library.xml file and everything went ok. Whenever I changed a smart playlist or added songs, my Traktor looked at the updated .xml file and Traktor updated it's own files.
SUDDENLY, and I dont know why, this iTunes Music Library.xml file did not update anymore. Whenever I change a song or add a song, the 'update date' in my finder next to the iTunes Music Library.xml file stays the same (1 May 2010) This means my DJ software does not show the updated/added songs...
Plse help... what should I do... I am a professional DJ and I especially bought this iMac for the purpose of DJ'ing. Because of this issue, I can't use it anymore...try if the suggestions in this thread help: http://discussions.apple.com/thread.jspa?threadID=2168081&tstart=0.
JGG -
Safari Not Responding When Opening New Tab
For the past few days, every time I try to open a new tab in Safari, I get the spinning pinwheel and I have to force quit Safari. Every. Single. Time.
So far I've tried upgrading to OS X 10.8.5, turning off extensions, clearing the cache, restarting the computer. It still happens every time I try to open a tab. I have no idea why this is happening all of a sudden. The only thing I've downloaded recently is the FlipClock widget. I can't think of any reason for this to start happening out of the blue, but I'm about to flip my lid. Help?1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Object ID not created when adding new member
Hi,
I have 11 Dimension on my application, while i tried to add new member on user define dimension (Location) and on entity dimension. the object id is not created in repository.
i'm using Hyperion Planning 11.1.1.1 what might be the cause and how to fix this?
please help.
Regards,
IkaHi John,
this is the error that i've got.
java.sql.SQLException: ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APPS.XJM_UPLOAD_SD_PKG", line 494
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.e.y(e.java)
at com.sunopsis.dwg.DwgJv.treatCmd(DwgJv.java)
at com.sunopsis.dwg.DwgJv.main(DwgJv.java)
at oracle.odi.Agent.main(Agent.java)
/u01/oracle/TEST/apps/apps_st/appl/xxcust/12.0.0/bin/XXJM_UPLOAD_SDF
Program exited with status 110
after checking the object id for location and entity is not found. -
Common Phone Profile change is not updated when adding new phone
We have CUCM 8.5.1 and phone setting for web access is disabled by default when creating a new phone. Updating the field in Common Phone Profile, the Standard Common Phone Profile has no affect on this setting. How can get web access enabled by default for each new manual phone add without having to change the setting manually in the add phone, phone configuration screen?
Thanks,
DennisDid you select the Override Setting checkbox on the CPP? The value shown is only enforced when the box is checked. The same goes for the global or per-device values.
-
Adobe Media Encoder CS5.5 crashing (not responding) when adding files
Hello,
I am running AME CS5.5 on a late 2010 MacBook Pro. I have been trying to create some broadcast quality .mpg files for my local cable provider's Video On Demand service but AME keeps crashing on me whenever I add a .mov file to the queue. I am using Final Cut Pro and Adobe After Effects CS5.5 to edit video and create animations. I have been able to encode a few files into the required .mpg specs, but now I can't even add a file into the queue without it freezing up. I then have to force quit the application to shut it down. I have recently repaired my disk permissions and used DiskWarior to clean up and create a new directory. Is this a known bug? Is Adobe working on a fix. I hope so because I have some projects due in mid-September and would hate to have to resort to using Apple's Compressor instead of AME since AME is faster. Any help would be much appreciated.
Here are my Mac specs:
Model Name: MacBook Pro
Model Identifier: MacBookPro6,1
Processor Name: Intel Core i5
Processor Speed: 2.53 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 3 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0C
SMC Version (system): 1.57f17
Operating System:
OS X Snow Leopard 10.6.8
Software:
Adobe Master Collection CS5.5
Apple FInal Cut Studio 3
Apple Final Cut Pro X
Apple Motion 5
Apple Compressor 4Is this happening with all files? Just QuickTime files? Just QuickTime files using a certain codec?
I'm taking a shot in the dark, but any time that someeone mentions hangs and QuickTime, I suspect the problems described here:
http://kb2.adobe.com/cps/857/cpsid_85711.html -
Hey software does not respond when I open a new file or an existing file
Hey software does not respond when I open a new file or an existing file
Nobody can tell you anything without system info and other technical details.
Mylenium -
TableSorter errors when adding new data
so here is the deal:
I am using the TableSorter.java helper class with DefaultTableModel
from: http://java.sun.com/docs/books/tutorial/uiswing/components/table.html
It works great when the data is static and I get it for the first time. however, occationally, when adding new data I get a NullPointerException error.
in use:
DefaultTableModel.addRow()
DefaultTableModel.removeRow() and
DefaultTableModel.insertRow() methods.
Error:
java.lang.ArrayIndexOutOfBoundsException: 5
at com.shared.model.TableSorter.modelIndex(TableSorter.java:294)
at com.shared.model.TableSorter.getValueAt(TableSorter.java:340)
at javax.swing.JTable.getValueAt(Unknown Source)
at javax.swing.JTable.prepareRenderer(Unknown Source)...
code problem I:
public Object getValueAt(int row, int column)
return tableModel.getValueAt(modelIndex(row), column);
}code problem II:
public int modelIndex(int viewIndex)
return getViewToModel()[viewIndex].modelIndex;
}TableSroter class:
package com.shared.model;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.util.List;
import javax.swing.*;
import javax.swing.event.TableModelEvent;
import javax.swing.event.TableModelListener;
import javax.swing.table.*;
* TableSorter is a decorator for TableModels; adding sorting
* functionality to a supplied TableModel. TableSorter does
* not store or copy the data in its TableModel; instead it maintains
* a map from the row indexes of the view to the row indexes of the
* model. As requests are made of the sorter (like getValueAt(row, col))
* they are passed to the underlying model after the row numbers
* have been translated via the internal mapping array. This way,
* the TableSorter appears to hold another copy of the table
* with the rows in a different order.
* <p/>
* TableSorter registers itself as a listener to the underlying model,
* just as the JTable itself would. Events recieved from the model
* are examined, sometimes manipulated (typically widened), and then
* passed on to the TableSorter's listeners (typically the JTable).
* If a change to the model has invalidated the order of TableSorter's
* rows, a note of this is made and the sorter will resort the
* rows the next time a value is requested.
* <p/>
* When the tableHeader property is set, either by using the
* setTableHeader() method or the two argument constructor, the
* table header may be used as a complete UI for TableSorter.
* The default renderer of the tableHeader is decorated with a renderer
* that indicates the sorting status of each column. In addition,
* a mouse listener is installed with the following behavior:
* <ul>
* <li>
* Mouse-click: Clears the sorting status of all other columns
* and advances the sorting status of that column through three
* values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to
* NOT_SORTED again).
* <li>
* SHIFT-mouse-click: Clears the sorting status of all other columns
* and cycles the sorting status of the column through the same
* three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
* <li>
* CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except
* that the changes to the column do not cancel the statuses of columns
* that are already sorting - giving a way to initiate a compound
* sort.
* </ul>
* <p/>
* This is a long overdue rewrite of a class of the same name that
* first appeared in the swing table demos in 1997.
* @author Philip Milne
* @author Brendon McLean
* @author Dan van Enckevort
* @author Parwinder Sekhon
* @version 2.0 02/27/04
public class TableSorter extends AbstractTableModel
protected TableModel tableModel;
public static final int DESCENDING = -1;
public static final int NOT_SORTED = 0;
public static final int ASCENDING = 1;
private static Directive EMPTY_DIRECTIVE = new Directive(-1, NOT_SORTED);
public static final Comparator COMPARABLE_COMAPRATOR = new Comparator()
public int compare(Object o1, Object o2)
return ((Comparable) o1).compareTo(o2);
public static final Comparator LEXICAL_COMPARATOR = new Comparator()
public int compare(Object o1, Object o2)
return o1.toString().compareTo(o2.toString());
private Row[] viewToModel;
private int[] modelToView;
private JTableHeader tableHeader;
private MouseListener mouseListener;
private TableModelListener tableModelListener;
private Map columnComparators = new HashMap();
private List sortingColumns = new ArrayList();
public TableSorter()
this.mouseListener = new MouseHandler();
this.tableModelListener = new TableModelHandler();
public TableSorter(TableModel tableModel)
this();
setTableModel(tableModel);
public TableSorter(TableModel tableModel, JTableHeader tableHeader)
this();
setTableHeader(tableHeader);
setTableModel(tableModel);
private void clearSortingState()
viewToModel = null;
modelToView = null;
public TableModel getTableModel()
return tableModel;
public void setTableModel(TableModel tableModel)
if (this.tableModel != null)
this.tableModel.removeTableModelListener(tableModelListener);
this.tableModel = tableModel;
if (this.tableModel != null)
this.tableModel.addTableModelListener(tableModelListener);
clearSortingState();
fireTableStructureChanged();
public JTableHeader getTableHeader()
return tableHeader;
public void setTableHeader(JTableHeader tableHeader)
if (this.tableHeader != null)
this.tableHeader.removeMouseListener(mouseListener);
TableCellRenderer defaultRenderer = this.tableHeader.getDefaultRenderer();
if (defaultRenderer instanceof SortableHeaderRenderer)
this.tableHeader.setDefaultRenderer(((SortableHeaderRenderer) defaultRenderer).tableCellRenderer);
this.tableHeader = tableHeader;
if (this.tableHeader != null)
this.tableHeader.addMouseListener(mouseListener);
this.tableHeader.setDefaultRenderer
new SortableHeaderRenderer(this.tableHeader.getDefaultRenderer())
public boolean isSorting()
return sortingColumns.size() != 0;
private Directive getDirective(int column)
for (int i = 0; i < sortingColumns.size(); i++)
Directive directive = (Directive)sortingColumns.get(i);
if (directive.column == column)
return directive;
return EMPTY_DIRECTIVE;
public int getSortingStatus(int column)
return getDirective(column).direction;
private void sortingStatusChanged()
clearSortingState();
fireTableDataChanged();
if (tableHeader != null)
tableHeader.repaint();
public void setSortingStatus(int column, int status)
Directive directive = getDirective(column);
if (directive != EMPTY_DIRECTIVE)
sortingColumns.remove(directive);
if (status != NOT_SORTED)
sortingColumns.add(new Directive(column, status));
sortingStatusChanged();
protected Icon getHeaderRendererIcon(int column, int size)
Directive directive = getDirective(column);
if (directive == EMPTY_DIRECTIVE)
return null;
return new Arrow(directive.direction == DESCENDING, size, sortingColumns.indexOf(directive));
private void cancelSorting()
sortingColumns.clear();
sortingStatusChanged();
public void setColumnComparator(Class type, Comparator comparator)
if (comparator == null)
columnComparators.remove(type);
else
columnComparators.put(type, comparator);
protected Comparator getComparator(int column)
Class columnType = tableModel.getColumnClass(column);
Comparator comparator = (Comparator) columnComparators.get(columnType);
if (comparator != null)
return comparator;
if (Comparable.class.isAssignableFrom(columnType))
return COMPARABLE_COMAPRATOR;
return LEXICAL_COMPARATOR;
private Row[] getViewToModel()
if (viewToModel == null)
int tableModelRowCount = tableModel.getRowCount();
viewToModel = new Row[tableModelRowCount];
for (int row = 0; row < tableModelRowCount; row++)
viewToModel[row] = new Row(row);
if (isSorting())
Arrays.sort(viewToModel);
return viewToModel;
public int modelIndex(int viewIndex)
return getViewToModel()[viewIndex].modelIndex;
private int[] getModelToView()
if (modelToView == null)
int n = getViewToModel().length;
modelToView = new int[n];
for (int i = 0; i < n; i++)
modelToView[modelIndex(i)] = i;
return modelToView;
// TableModel interface methods
public int getRowCount()
return (tableModel == null) ? 0 : tableModel.getRowCount();
public int getColumnCount()
return (tableModel == null) ? 0 : tableModel.getColumnCount();
public String getColumnName(int column)
return tableModel.getColumnName(column);
public Class getColumnClass(int column)
return tableModel.getColumnClass(column);
public boolean isCellEditable(int row, int column)
return tableModel.isCellEditable(modelIndex(row), column);
public Object getValueAt(int row, int column)
return tableModel.getValueAt(modelIndex(row), column);
public void setValueAt(Object aValue, int row, int column)
tableModel.setValueAt(aValue, modelIndex(row), column);
// Helper classes
private class Row implements Comparable
private int modelIndex;
public Row(int index)
this.modelIndex = index;
public int compareTo(Object o)
int row1 = modelIndex;
int row2 = ((Row) o).modelIndex;
for (Iterator it = sortingColumns.iterator(); it.hasNext();)
Directive directive = (Directive) it.next();
int column = directive.column;
Object o1 = tableModel.getValueAt(row1, column);
Object o2 = tableModel.getValueAt(row2, column);
int comparison = 0;
// Define null less than everything, except null.
if (o1 == null && o2 == null)
comparison = 0;
} else if (o1 == null)
comparison = -1;
} else if (o2 == null)
comparison = 1;
} else {
comparison = getComparator(column).compare(o1, o2);
if (comparison != 0)
return directive.direction == DESCENDING ? -comparison : comparison;
return 0;
private class TableModelHandler implements TableModelListener
public void tableChanged(TableModelEvent e)
// If we're not sorting by anything, just pass the event along.
if (!isSorting())
clearSortingState();
fireTableChanged(e);
return;
// If the table structure has changed, cancel the sorting; the
// sorting columns may have been either moved or deleted from
// the model.
if (e.getFirstRow() == TableModelEvent.HEADER_ROW)
cancelSorting();
fireTableChanged(e);
return;
// We can map a cell event through to the view without widening
// when the following conditions apply:
// a) all the changes are on one row (e.getFirstRow() == e.getLastRow()) and,
// b) all the changes are in one column (column != TableModelEvent.ALL_COLUMNS) and,
// c) we are not sorting on that column (getSortingStatus(column) == NOT_SORTED) and,
// d) a reverse lookup will not trigger a sort (modelToView != null)
// Note: INSERT and DELETE events fail this test as they have column == ALL_COLUMNS.
// The last check, for (modelToView != null) is to see if modelToView
// is already allocated. If we don't do this check; sorting can become
// a performance bottleneck for applications where cells
// change rapidly in different parts of the table. If cells
// change alternately in the sorting column and then outside of
// it this class can end up re-sorting on alternate cell updates -
// which can be a performance problem for large tables. The last
// clause avoids this problem.
int column = e.getColumn();
if (e.getFirstRow() == e.getLastRow()
&& column != TableModelEvent.ALL_COLUMNS
&& getSortingStatus(column) == NOT_SORTED
&& modelToView != null)
int viewIndex = getModelToView()[e.getFirstRow()];
fireTableChanged(new TableModelEvent(TableSorter.this,
viewIndex, viewIndex,
column, e.getType()));
return;
// Something has happened to the data that may have invalidated the row order.
clearSortingState();
fireTableDataChanged();
return;
private class MouseHandler extends MouseAdapter
public void mouseClicked(MouseEvent e)
JTableHeader h = (JTableHeader) e.getSource();
TableColumnModel columnModel = h.getColumnModel();
int viewColumn = columnModel.getColumnIndexAtX(e.getX());
int column = columnModel.getColumn(viewColumn).getModelIndex();
if (column != -1)
int status = getSortingStatus(column);
if (!e.isControlDown())
cancelSorting();
// Cycle the sorting states through {NOT_SORTED, ASCENDING, DESCENDING} or
// {NOT_SORTED, DESCENDING, ASCENDING} depending on whether shift is pressed.
status = status + (e.isShiftDown() ? -1 : 1);
status = (status + 4) % 3 - 1; // signed mod, returning {-1, 0, 1}
setSortingStatus(column, status);
private static class Arrow implements Icon
private boolean descending;
private int size;
private int priority;
public Arrow(boolean descending, int size, int priority)
this.descending = descending;
this.size = size;
this.priority = priority;
public void paintIcon(Component c, Graphics g, int x, int y)
Color color = c == null ? Color.GRAY : c.getBackground();
// In a compound sort, make each succesive triangle 20%
// smaller than the previous one.
int dx = (int)(size/2*Math.pow(0.8, priority));
int dy = descending ? dx : -dx;
// Align icon (roughly) with font baseline.
y = y + 5*size/6 + (descending ? -dy : 0);
int shift = descending ? 1 : -1;
g.translate(x, y);
// Right diagonal.
g.setColor(color.darker());
g.drawLine(dx / 2, dy, 0, 0);
g.drawLine(dx / 2, dy + shift, 0, shift);
// Left diagonal.
g.setColor(color.brighter());
g.drawLine(dx / 2, dy, dx, 0);
g.drawLine(dx / 2, dy + shift, dx, shift);
// Horizontal line.
if (descending) {
g.setColor(color.darker().darker());
} else {
g.setColor(color.brighter().brighter());
g.drawLine(dx, 0, 0, 0);
g.setColor(color);
g.translate(-x, -y);
public int getIconWidth()
return size;
public int getIconHeight()
return size;
private class SortableHeaderRenderer implements TableCellRenderer
private TableCellRenderer tableCellRenderer;
public SortableHeaderRenderer(TableCellRenderer tableCellRenderer)
this.tableCellRenderer = tableCellRenderer;
public Component getTableCellRendererComponent(JTable table,
Object value,
boolean isSelected,
boolean hasFocus,
int row,
int column)
Component c = tableCellRenderer.getTableCellRendererComponent(table,
value, isSelected, hasFocus, row, column);
if (c instanceof JLabel) {
JLabel l = (JLabel) c;
l.setHorizontalTextPosition(JLabel.LEFT);
int modelColumn = table.convertColumnIndexToModel(column);
l.setIcon(getHeaderRendererIcon(modelColumn, l.getFont().getSize()));
return c;
private static class Directive
private int column;
private int direction;
public Directive(int column, int direction)
this.column = column;
this.direction = direction;
}any input will be appreciated.
thanks
PeterThe code you posted doesn't help us at all. Its just a duplicate of the code from the tutorial. The custom code is what you have written. For example do you update the TableModel from the Event Thread? Do you update the SortModel or the DefaultTableModel? If you actually provide your test code and somebody has already downloaded the sort classes, then maybe they will test your code against the classes. But I doubt if people will download the sort classes and create a test program just to see if they can duplicate your results (at least I know I'm not about to).
-
I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?command-option-esc keys and force quit Mail. Then relaunch.
Maybe you are looking for
-
After installing any version of itunes. Told failed to install properly and could not burn or import music from Cd's. Also will not allow eithre one of my 2 ipods to sync with it as well.
-
How to convert 864 Transaction code into XML in EDI to File Scenario
Hello Friends, Can any body help me out in using 864 Transaction Code (Tex Message) in EDI to Flat File Conversion?? I mean i am using just 2 Fields i.e Name and Address.I didnt understand the Format given<u><i>..Here is the
-
How can i get the smiley faces back on texting? I hate the green androids.
-
hi Friends, using tomcat and i m trying to run jsp file and getting the error javax.servlet.ServletException: com/sun/tools/javac/Main (Unsupported major.minor version 48.0) What does this mean and wht needs to be done Thnx
-
i tried cleaning my disk and reinstalling audition to a different hard drive