Numbers of day which can be see on iphone 4s

Do you know if it's possible to modify the quantity of days which can be seen in the app calendar on an iphone 4s ?
I want to see a complete job week.
Thanks a lot

By "location" I meant the location on the phone.  On the iPhone 5 the jack is on the bottom, near the dock connector.  This location change could interfere with the operation of some accessories.
The internal pin connections have not changed but there may have been a change in the power available for the microphone.  This shouldn't affect headsets, but could affect other devices that get their power from the headset jack. such as some IR remote apps or card readers.

Similar Messages

  • I have an iPhone 4. I tried updating it tonight to iOS7 through my just updated iTunes. I received an error message telling me the update couldn't be completed. My phone then went to the screen asking me to connect to iTunes which can't see my phone. Help

    I have an iPhone 4. I tried updating it tonight to iOS7 through my just updated iTunes. I received an error message telling me the update couldn't be completed. My phone then went to the screen asking me to connect to iTunes which can't see my phone. Help!!

    micron12
    Hi I had a simular problem with my iPhone 4 and iPad 3 and found that the USB connection on the computer was at fault so I moved the connection to a USB port on the Mother board.This curred my problem,see if ti works for you.
    Windows 7 and windows XP

  • I can't see my iPhone on my Powerbook Pro, tried solution offered, still can't see it.

    I can't see my iPhone on my Powerbook Pro, tried restart solution offered twice, still can't see it. Any ideas?

    Is it a Powerbook or a Macbook Pro?
    A Powerbook is not capable of running a version of iTunes that will work with an iPhone 5 (which I'm assuming you have, since it's the only iPhone that runs iOS 6.1.4, which you indicate you have).

  • How can i see my Iphone IMEI status?

    How can i see my Iphone IMEI status?

    The IMEI number can be seen in Settings/General/About
    You can't see any IMEI status.

  • After updating OS to 10.9.3 iTunes can't see my iPhone over Wi-Fi.

    After updating OS on my Retina MacBook Pro to Mavericks 10.9.3 with iTunes 11.2 I succesfully transfer one album over Wi-Fi to my iPhone 5 with iOS 7.1.1.
    Then I decided to transfer another, but when I drop the albums to iPhone on my iTunes,
    iTunes start to Looking for iPhone and the phone dissapeard.
    I tried to restarting the iTunes and the problem was same. First I saw iPhone connected but when tried to transfer music it dissapeard same way.
    I tryed to restart my MacBook but from there can't see my iPhone anymore.
    I checked that the MBP and iPhone are on same network.
    Thanks for any tips.

    After a while it start to work.... No problems.

  • Itunes can't see my iphone

    Itunes can not see my iphone under the devices.  Recently used Windows Parallel on my Mac but made sure to de-select the USB in the parallels application and clicked associate this device with Mac OS and not the windows os.  I have tried un-installing iTunes, reinstalled with most recent edition.  Recycled the iphone on / off.  Removed the iphone from the docking cradle to direct connection with iphone to usb and no hubs, cradles etc.... in between iphone and computer without any success.  I know the mac and itunes are working correctly because it syncs my ipad, wife's iphone 3gs and kids ipod touch without any trouble.  I looked in the hardware listing in the system preferences and the usb lists my iphone as attached.  With the iphone 4 plugged in I rebooted my mac hoping it would auto open itunes and auto sync but no luck. 

    Hello Barbara4090,
    When the iPhone unmounts from iTunes during the backup phase, it can be due to some unreadable data on the iPhone that iTunes cannot deal with. It could be data saved by a third party APP on the iPhone, but there's no easy way to determine the what data may be causing the issue.
    First try resetting the iPhone by holding down the sleep/power button and home button until you see the Apple logo (ignore the "Slide to Power Off" prompt).
    Connect to iTunes and Sync to test.
    Next would be to determine whether the issue is actually with the iPhone or the MacBook Air.
    You mentioned that you also use an iMac.
    If the iMac is running at least 10.4.11 and has a current installation of iTunes 8.0.2 on it, you can use the iMac to isolate the source of the issue.
    If you have essentially the same information on both computers, you can do this test in the existing user on the iMac.
    If you'd prefer not to intermingle any data from the iPhone you can create a new User on the iMac and test:
    http://support.apple.com/kb/HT3309
    Before connecting the iPhone to the iMac, put a check in the "Disable Automatic Syncing for iPods and iPhones" in the Devices section of iTunes Preferences.
    Connect the iPhone and then right-click or control-click on the iPhone under Devices and choose "Backup."
    If the iPhone cannot be backed up on the second computer, then it is due to some unusable data on the iPhone that cannot be backed up.
    After the test, you can delete the new User if you created one.
    If that is the case, then you may need to restore the iPhone and choose the option to restore from a previous backup at the end of the restore process:
    http://support.apple.com/kb/HT1414
    I would do this on the computer that you normally sync the iPhone with.
    If, on the other hand, the iMac can backup the iPhone successfully, then there is possibly an issue with the MacBook Air or it's software:
    http://support.apple.com/kb/HT1224
    Hope that helps,
    Charles H.

  • My itunes can't see my iphone 4 after i make ubdat for iphone and itunes also ?

    my itunes can't see my iphone 4 after i make ubdat for iphone and itunes also ?

    Hi there 3eboo,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • I have windows XP. I can`t see my Iphone 3GS in Itunes.

    I have windows XP. I can`t see my Iphone 3GS in Itunes.

    Did you try the troubleshooting tips in this article? iOS: Device not recognized in iTunes for Windows

  • Hallo. My computer can't see my iPhone 4 when I open iTunes. iPhoto sees my iPhone as a device, but can't see its photos, although it recognizes how many photos there are. Some help? Thanks

    Hallo.
    My computer can't see my iPhone 4 when I open iTunes. iPhoto sees my iPhone as a device, but can't see its photos, although it recognizes how many photos there are. Some help?
    Thanks

    Did you also read that same link you provided and see this "With iTunes 10.3 or later and iOS 4.3.3 or later, "?
    Iphone 3G does not support ios 4.3

  • IPhoto can't see my iPhone 5S

    Even though I plug in, iPhoto can't see my iPhone 5S device.  iTunes sees it, sometimes even if it isn't plugged in, but iPhoto is not seeing it.  This also happened to a friend who repeatedly connected and disconnected until it was recognized.  That hasn't happened for me yet, and it sounds like a bug that needs fixing. 
    Anybody else have this experience?  Know a solution?  Something?

    It's a long shot but the method posted by Robin Johnson in this post might work for you:
    Robin Johnson
    This solved my questionRe: ios update problem - 7.1 11D167 iphoto not picking up new photos
    Mar 20, 2014 7:15 AM (in response to JdinPa)
    I figured out the fix for the Mac users having this problem. I connected my iPhone to my iMac and started iTunes. A dialogue came up in iTunes, I OK'd that and then OK'd the usual "Do you trust this Mac" that comes up on my iPhone.
    Suddenly Image Capture launched itself and there were all my photos, ready to be downloaded.
    OT

  • I can't see my iphone or ipad in the latest version of itunes.  Any ideas?

    I can't see my iphone or ipad in the latest version of itunes.  Any ideas to solve this issue?

    Hello Brigid M,
    I understand that your devices are not recognized by iTunes when connected. The following article may help to resolve your issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • TS1567 can't see my iphone and my ipdad on itunes, i have tried re-installing itunes and yet still nothing happens, pls help

    can't see my iphone and my ipdad on itunes, i have tried re-installing itunes and yet still nothing happens, pls help

    http://support.apple.com/kb/TS1538

  • Can't see my iphone 5 playlists in itunes

    Can't see my iphone's playlist in itunes

    Always after installing programs, specially if using mac software (itunes etc) restart your computer and device. Worked for me, always has and does!

  • Can't see my iphone 4s in itune 10.5.2

    can't see my iphone 4s in itune 10.5.2

    Seer if this helps you: http://www.apple.com/support/iphone/assistant/itunes/

  • I have win7. I can`t see my Iphone 3GS in Itunes.

    I have win7. I can`t see my Iphone 3GS in Itunes.

    http://support.apple.com/kb/TS1538

Maybe you are looking for

  • How do you "Create an iPod or iPhone version"?

    I bought "Daddy Day Care" from the iTunes store, and after syncing my iPod many, many times, it still won't show up on my iPod. It's a 2nd generation, with 3 gigabytes left. Daddy Day Care is only 1 gigabyte. I think it's the video dimensions, as the

  • External web service provided by third party application

    Hi all, Hope to clarify some doubts on usage of Enterprise Service Repository. I understand that ESR is the storage of service interfaces that may be provided or consume by different systems in the landscape. If a business process is required to cons

  • ISE cannot push the profile to the cisco network setup assistant?

    We have tried a few android devices with version 4.2+ but still got the error message 'Unable to download profile.(Have you logged into the guest portal?)' as shown at the bottom picture. In fact, we are connecting the devices to an open SSID which p

  • Idoc to proxy scenario with an acknowledgment

    Hi ; I have to implement a IDoc to abapProxy scenario but an application acknowledgment must be return so IDOC status will be set. How can i understand whether an application error exists while abapProxy is executing or not in status of IDOC? Do I ne

  • Additional Manifest Files to Merge don't get merged

    I'm using JDeveloper 11.1.1.1.0 to create some 'executable' jars to run on client machines. The automatically generated manifest file doesn't have the necessary Class-Path statements, so I've created a custom MANIFEST.MF to be merged into the auto-ge