Numbers of login users in SAP

Hi Experts,
Please can You help me with one question?
Do you know about some tcode, reports or solution which can make report with statistics
about numbers of users logs in SAP during day.
For example change of log users to SAP hour after hour.
(at 10 am 100 users, at 11 am 200 users, at 12 am 180 users and so on.)
Thank You for advice.
Best Regards
Jakub Vanek

Hello,
Thank You for your advices. It´s very helpfull.
At the end I found solution by running tcode ST07, there is a lot of loggs on users statistic.
But new problem occured. In DEV system st07 reports correctly, but in PRD system after running st07 and showing User distribution history system information occured "No analysis dat avaible".
I don´t really know if some collect jobs must be running or something.
Best Regards
Jakub Vanek

Similar Messages

How to access Sap portal login user in ejb web service

Hi,
I wnt to access SAP Portal login user in my ejb application which resides on the same server.
I am using following code
try {
     IUser user =null;                         IWDClientUser wdUser = WDClientUser.getCurrentUser();
                              user = wdUser.getSAPUser();
                         } catch (WDUMException e) {
                              // TODO Auto-generated catch block
                              e.printStackTrace();
Some additional jar files are required for this?
The same code works fine with webDynpro but not with ejb.
Thanks in advance
Best regards,
Nilesh

Thanks for reply.
I have already added com.sap.security.api in my EJB module project classpath. How to add the same in EJB application Project (application-j2ee-engine.xml)?
Best regards,
Nilesh

Parallel How many times user can login to the SAP system through ITS

Hello all
We are using the ITS ---620 and following 46D R/3 system
R/3 system details:
Kernal :
kernel release :46D
O/S :SunOS 5.8 Generic_108528-05 sun4us
We would like to now, At a time How many times user can login to the SAP system through ITS
Kindly letus know if any one have idea about parameter which can restrict the end users to u201CNu201D times/ sessions.
Transaction SITSPMON/SMICM are not working in R/3 system as it is 46D.
We found that parameter u201Clogin/disable_multi_gui_loginu201D works with SAPgui logons.
System logons using the Internet Transaction Server (ITS) or Remote Function Call (RFC) are not affected by this Parameter u201Clogin/disable_multi_gui_loginu201D
I need similar parameter u201Clogin/disable_multi_gui_loginu201D for the ITS users.
Thanks

I have searched all docs and notes.
Everytime the answer is PArameter for multi_gui_logonis not applicable for SAP Gui for HTML ( Browser )
The functionality does not exist for SAP Gui for HTML.
Regards,

Error encountered during provisioning of user to SAP CUP in OIM 11g R1 BP07

We recently updated our environment from 11.1.1.5 BP05 to 11.1.1.5 BP07.
We are facing an issue with provisioning users to SAP CUP system. We receive an error specifying :
Response: oracle.iam.connectors.sap.cup.ws.submitreq.ObjectFactory
Response Description: Unknown response received
However, we are unable to find any errors related in the log file. The SAP UM connector version is 9.1.2.5. Please let us know the cause of this issue.

1. Login to Design Console and open your GTC provisioning process definition , then Add a new task called "Notify Email".
2. Check Required for Completion, Allow Cancel and optionally Disable Manual Insert.
3. In the Integration tab, add tcCompleteTask
4. In the assignment tab, add an entry with the Default rule, target type of User, and for the User field pick an existing user with a valid email address in their User Profile.
5. In the Notification tab add an entry and check Assignee, (You can select User, Manager etc ) have the Status field set to C and for the Email field pick a Provisioning type of Notification Template that you have already created.
N.B: 7. Make sure the IT Resource and email configuration properly otherwise you will not get the mail.
Thanks
Tamim Khan

How to delete a user in SAP-CPS Version 7.0

Hello,
I created my users via UME ( User Management Engine of Java Application server). Unfortunately I used the wrong name convention, so I had to recreate all the users in UME. Afterwards I delete all wrong users in UME.
Than I tried to login with my new user in SAP-CPS (users are normally created in SAP-CPS during first login) but I get the error message that I reached the maximum number of 10 users allowed in the basic version. No problem I thougt, I simply delete the wrong ones in SAP-CPS. But I do not know how to delete a user! I could not find any menu item or any describtion in the manualls how to delete an user in SAP-CPS.
I remove the users from any Isolation group, I disabled all the users but still I could not find any way to delete them.
Has any body a hint for mor.
Kind regards
Frank Morleo

Hello Anton,
deactivating the unused users made it possible to login with the new ones.
Thanks for your help.
Now I have to find out how to clear the deactivated users from the list.
Regards
Frank

How to use CMS Users with SAP BOPC NW 7.5

Hello,
I have problems importing and using CMS Users with BO PC 7.5 NW.
I am trying two types of CMS-users
1. CMS Enterprise Users created in CMS and using "Enterprise" authentication
2. SAP BW Users imported into CMS using their SAP authentication "secSAPR3")
but both don't work:
In the BOPC Admin Client, I can succesfully select Security->Users->"Add new Users". Both CMS "Enterprise Users" and CMS Users that use SAP authentication are displayed in the "Everyone" Group.
The CMS Enterprise Users are displayed as <username>, e.g. "Miller".
The CMS users with sap authentication are displayed as <SAPSystem><Client>/<SAPusername>, e.g. "KBE100/Smith".
Now If I try to import a user...
1. CMS Enterprise Users
If can successfully import CMS Enterprise Users and add them to the ADMIN Team, e.g. "Miller".
The problem is they can't be used to log in to the Admin Client and Excel Client:
E.g. I enterUser-ID "Miller" and his CMS-Enterprise-password under password after starting Excel Client, an error message shows up: "The UserID, Password or Domain cannot be authenticated. Go back and make sure you entered valid credentials" ... (same error message as if the user wouldn't exist/wrong pw.).
Seems the user wasn't added as BO PC user. Or do I need to use any prefix before the "user ID" for CMS Enterprise users in the User_ID field instead of just "Miller"?!
2. CMS Users which use SAP-authentication (users imported into CMS from BW and use SAP-authentication)
In the BO PC Admin Client, I can't import them: I go through "1. User Setup" select "KBE~100/Smith", "2. User Detail", "3. Assignments", but if I am in "4. Finish" and click on "Apply", the following error shows up:
"Failed to create directory \root\Webfolders\<AppSetName>\<Appname>" for "KBE~100/Smith".
My guess is that the operating system doesn't like the "/" in the Username - but I guess this can't be changed bc. these Users from CMS and are already displayed with the "/" between SAPSystemID~ClientNummer and username in the User-list in BOPC Admin Client!
side remark: if I create a SAP CMS Enterprise user which contains a "/" in the username (on pupose ), I am getting the same error message.
Any help, explanations and workarounds are greatly appreciated - Any solution will be awarded with maximum points!
Best Regards and thanks a lot for your help!

Hi Florian,
The problem seems indeed the file system on the bw not being able to handle "/". The automatic user import from the bw role into the CMC does not give you an option to replace the "/" character with anything else.
This should solve it:
- Go to the CMC double click the user. Delete the server part "KBE100/" and click save. Make sure the default system is set to "KBE100". The user should now be able to login from BPC with the user Smith.
Good luck,
Martin

NWDS Webdynpro deploy: Cannot login to the SAP J2EE Engine using ......

Friends,
I am getting the following error while deploying a web dynpro application through NWDS.
Aborted: development component 'WebDynpro_ErrorBehavior'/'local'/'LOKAL'/'0.2007.05.29.17.02.04'/'1':Cannot login to the SAP J2EE Engine using user and password as provided in the Filesystem Secure Store. Enter valid login information in the Filesystem Secure Store using the SAP J2EE Engine Config Tool. For more information, see SAP note 701654.com.sap.sdm.serverext.servertype.inqmy.extern.DeployManagerAuthExceptionWrapper: Wrong security credentials detected while trying to obtain connection to the J2EE Engine. (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMAUTHEXC)
I get this error after I supply the SDM password which NWDS asks before deploying.
Can someone guide?
[email protected]
Thanks

In the additonal error log it says-
Unable to compare host[px1db] and host[x900704] Throwable: java.net.UnknownHostException Throwable message: x900704: x900704
where px1db is my portal server and x900704 is my localmachine name.
I dont know why it says so ...In NWDS i have configured only px1db.
any thoughts.
Vinay

Tcode to view the list of all dialog users in SAP XI

Dear all,
What is the Tcode to view the list of all dialog user is SAP XI system.
I checked with SU01, it doesn't have a option to display the list of existing users.
Any other Tcode for this purpose.
Regards,
Younus

Hi..
T-code AL08 -> list all logged users(user login logon)
Regards..
krishna..

How to restrict multiple log-ins by same user in SAP BO 4.0

Hi ,
Facing licence issue Due to subjected error .
How to restrict multiple log-ins by same user in SAP BO 4.0
Thanks in advance .

Then I would say it is not possible: Restrict multiple login in SAP Business Objects 4.0 SP6 for single user
multiple login disable in BO | SCN

How to get windows XP login name in SAP.

I want get windows XP login name in SAP, which funcion module can and How method can, thanks.

hi,
GUI_GET_DESKTOP_INFO Returns information about the end-users desktop
TH_USER_INFO Returns information about user
Try this FM, not sure if it return windown user name....give it a try.
Hope this helps, Do reward.
Edited by: Runal Singh on Mar 27, 2008 4:16 PM

How to set restriction for user in sap

Hi,
I have created a user,now i need to restrict the user to work only for 8 hrs per day.HOw can i set timing for the user.Kindly help out regarding this.
Regards
sekar

Sekar,
If you use external authetnication for users when they logon to SAP, then you can control the times they can logon and which days of week (if required). For example, it is possible to use Active Directory authentication to authenticate users to SAP application via SNC or using a custom login module in WebAS Java, and in AD you can set times when logons are allowed. This might be what you are looking for ?
If you want to log somebody off SAP when they have been using it for a period of time, then this can be dangerous if they are in the middle of a complex transaction when they are logged off. Also, I don't think this functionality is included in SAP product. If you don't want somebody to use SAP at certain times of day, then it might be better to force a screen saver at workstation instead, if this is what you want.
Regards,
Tim

How to make a login method for SAP Netweaver in java

Hi
Can anyone help me out to make a login() method that can be used to login to the SAP Netweaver server using a simple java code..........
Hope a helpfull answers from u all....
THANKS in ADV.
Rupesh Khemka

Hi Everyone
I have made the login() method but i am facing the problem while making the resource context...Because in Resource Context it takes IUser of package
com.sapportals.portal.security.usermanagement.IUser but I have got IUser of package com.sap.security.api.IUser ...while type Casting it with below code it is giving ClassCAstException.......
public class NewSimpleServlet extends HttpServlet {
     protected void doGet(
          HttpServletRequest request,
          HttpServletResponse response)
          throws ServletException, IOException {
          StringBuffer s = new StringBuffer();
          try {String j_user="epuser";
                    String j_password="Abcd1234";
                    request.setAttribute("j_user", j_user);
                    request.setAttribute("j_password", j_password);
                    javax.security.auth.Subject subject;
Set principals = UMFactory.getLogonAuthenticator().logon(request, response, "uidpwdlogon").getPrincipals();
i have problem with getting IUser object from set of principals. In javadoc is written: "In order to get an IUser object from this subject, call Subject.getPrincipals() and iterate through the returned Set of principals." so i tried to iterate but i was not able to get that IUser with any casting. Do u know how it should be?
IUser serviceUser = (IUser)subject.getPrincipals().iterator().next();
Now in resource Context
ResourceContext c = new ResourceContext(User);
Here resource context need IUser type object as parameter...
I also tried st like this
loggedUser = UMFactory.getAuthenticator().getLoggedInUser(request, response);
but loggedUser is not authenticated.
Can Anyone Help me Out...
Thanks
Rupesh Khemka

Login User Session details

Could anyone provide information as how to fetch Login User session details in Web dyna pro .
I have Text field and Label in webdynapro View.
These need to be autofilled based on login user.
How to achieve this requirment in webdynpro.

Ragu,
Here the presentation on UME API and retreving the logon user details:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/webinars-nw-rig/using%20the%20user%20management%20api%20with%20ep%20applications%20-%20webinar%20powerpoint.pdf
You need to add these 2 jar files to buildpath
1)com.sap.security.api.jar
2)com.sap.security.api.perm.jar
For more help how to add jars :
Using JAR Class Finder
If it's not a local project and if you use NWDI environment , here the blog how to add jars for Web Dynpro DC's.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/194bdc4f-0901-0010-82ba-bf73af5d5f75
You can find some jar from the below sap jar finder website:
http://sapjarfinder.com/
Thanks
Krishna

Installing license for solution manager in DS (user/PW : sap*/pass)

Dear Experts,
I need to install license for the solution manager in the Discovery system 3.
I made 3 mistakes while logging in, so, the user/PW : sap*/pass can't logon to the system.
Can you please help me find how to log on to the client 001 of the solution manager when the user: sap* and PW : pass is unable to log on?
Thanks
Regards,
Sudeep

Hi Sudeep,
As per the Quick guide for V3, to login to Solman Client 001, the user /pw - : sap*/admin123
Since the sap* is locked, login with admin/admin in client 001 and unlock the required user account.
R,
Chaitra

How to create users in SAP BO (in cmc)

Hi All,
How to create users in SAP BO (in cmc) (pls step by step).
Thanks in Adavance,
Nitin

Hi Erika
I need your help
"Account information not recognized.The secLDAP Security Plugin is not enabled.contact your system administrator for details."
I am getting an error page when i am try to access BO reports from Flex UI.
This BO reports should work in the same single sign on session with Flex UI as per the application developed.
Note :The same users when login directly login to BO get access..

Numbers of login users in SAP

Similar Messages

Maybe you are looking for