Numbers still unable to sort large files

It only took about 30 seconds to discover Numbers 09 still does not have the capability to sort large files (10,000+ rows by 15 columns). I originally thought I had discovered a workaround but that fizzled as well since it was a "one shot" with all subsequent attempts getting the spinning beach ball even though the single column sort showed properly just before the beach ball. I posted several "Problem notices" after having to force quit every time I used 09. Since this would be the only reason for me to upgrade to 09 especially after having 08 only a couple of months I guess I will just have to put off thinking about it until there is a serious enough upgrade for my purposes.

Thanks for the information Ivan. However, I only have two formulas in the entire spreadsheet with one of them being just a counter (previous cell plus one) and the other determining the age of an individual from their date of birth and date of death.
I probably should have noted that I did get the sort to work one time albeit allowing the automatic feature to run its course between changing the column selections.
I.E.
Select the entire sheet except row one.
Click on Reorganize.
Click on Plus sign to bring up second selector > wait for automatic responses to complete.
(there were two separate "barometers" that came up with redisplay following each one.)
Click on first column selector and select D > wait for automatic responses and redisplays.
Click on second column selector and select C > wait for automatic responses and redisplays.
It looks like I made an assumption here that may not be true - that the TEAM had access to the problem reports where all this was spelled out in detail along with several attempts afterwards that would fail (Spinning beachball) after the first selection and redisplay regardless of whether there were one or two selectors in the sort popup.
BB

Similar Messages

  • HT3678 If I download a .mov file from gmail, I am not able to open the file. I reinstalled QuickTime 7.6.6, still unable to open the file. If I download the same file from another mail server I have no trouble. What is gmail doing to my file?

    If I download a .mov file from gmail, I am not able to open the file. I reinstalled QuickTime 7.6.6, still unable to open the file. If I download the same file from another mail server I have no trouble. What is gmail doing to my file?

    Also i have reinstalled the reader9 two  times and tried with reader8 also but in both the cases same problem.
    it would be gr8 help if someone can help.

  • Unable to download large files via my Mobile Network

    I have unlimited mobile data but I am unable to download large files, like podcasts unless I connect to Wi Fi. My settings are set to use mobile data, is there anything I can do?

    There is a 50meg (recently upgraded from 20) per file download limit over cellular data. No, you can't change that.

  • Got new iMac, I had completed the migration from PC to new Apple computer, but still unable to see the files on the iTunes

    got new iMac, I had completed the migration from PC to new iMac, but still unable to see all the apps and music that were saved from the old PC to new iMac. Please help.

    My guess is the 30-day trial period has expired but you didn't remove the trial before installing the full version. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
    Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

  • I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop.  I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG.  Is there a way to use

    I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3.  When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files.  I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file.  I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud.  I would prefer to use my CS3, if possible.  Can anyone advise me what to do?

    The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Some options:
    Upgrade to CS6
    Join the Cloud
    Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
    Camera raw, DNG | Adobe Photoshop CC

  • Unable to transfer large files from MB to External HDs

    Hi,
    This may be an unusual one. My 1st edition Macbook won't let me transfer large files to my external hard-drives, either by USB, Ethernet or wirelessly through my home wi-fi network.
    I've started video editing so I'm importing DVcam tapes through firewire from the camera. A full DV tape translates to about 8-12gb I think.
    Using iMovie and saving the import to my Freecom 3.5inch network harddrive vis USB or ethernet, it fails saying 'Unexpected error, error code 1309'.
    When I try quicktime pro instead to import the tape to the external HD, I get 'Operation could not be completed, An attempt to add a resource to the file failed'. This happens too with my WD 2.5inch external drive.
    However, there is no such problem when I import to the MB's internal harddrive. When I then try and shift the large file off the laptop to an external drive, via USB, ethernet of wirelessly, for editing and save keeping, it fails half way through.
    I have the same problem when I try back-up my 17gb virtual windows machine I use with VMware fusion off the laptop to an external drive.
    I am currently burning an 18gb iMovie project from the MB's internal HD, over 5 DVDs using Toast's disc-spanning and will reimport them to the external, which is really time consuming.
    Also to note, Final Cut Express doesn't have these problems as it seems to break up what would be an 18gb movie file into several smaller files, which my MB is quiet happy to let go onto an external drive. However, the problem re-emerges on Final Cut Ex when I try and import a HDV tape. Possibly FCE isn't breaking them up into small enough pieces for my MB to handle?
    Any ideas why this is happening and what I can do to fix it? Or does this mean a new laptop?

    Irish Apple Fan wrote:
    Hi,
    This may be an unusual one. My 1st edition Macbook won't let me transfer large files to my external hard-drives, either by USB, Ethernet or wirelessly through my home wi-fi network.
    I've started video editing so I'm importing DVcam tapes through firewire from the camera. A full DV tape translates to about 8-12gb I think.
    Using iMovie and saving the import to my Freecom 3.5inch network harddrive vis USB or ethernet, it fails saying 'Unexpected error, error code 1309'.
    When I try quicktime pro instead to import the tape to the external HD, I get 'Operation could not be completed, An attempt to add a resource to the file failed'. This happens too with my WD 2.5inch external drive.
    I'm a bit late to the party, but specifically there's a 4GB file size limit in the FAT32 format that is standard on many external hard drives. I've run across this problem before, and usually it copies over most of the file and then quits when it reaches the limit.

  • Unable to View Large Files

    We're having a recurring issue where users start getting 'cannot access the file' error messages when trying to view documents in document libraries, it'll start with the larger files (over 10mb) and spread eventually to all documents in all libraries. On
    the client side it looks as if the download is being interrupted or timing out after about 10 seconds (though the limit is set at 6min). 
    The only thing that appears to fix the issue is a complete reboot of the server. Something we're not keen on doing multiple times a day. 
    No error messages or warnings in the server logs and we don't appear to be hitting any thresholds. 
    Any ideas?

    It was some time ago since I had to tackle this problem, but I think my article at
    http://www.loisandclark.eu/Pages/largefiles.aspx will provide some insights.
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

  • After updating Bridge & PS, still unable to view CR2 files from Canon M3

    I cannot view CR2 Raw files from the Mark III on Bridge CS6 and Photoshop CS6 to convert into TIF and JPG files for a client. I have updated all of my Adobe programs, restarted, and the files are still not showing up for me. Help please!

    Thank you for elaborating.
    Your system should absolutely be opening those files.  Any of the versions of ACR (Adobe Camera Raw Plug-in) that run with Photoshop 13.0.6 can and will open those files if properly installed, that includes the current version, ACR 8.6.
    Go to About Plug-In > Camera Raw… in the Photoshop menu and see what version shows up there, just to check that the plug-in is installed correctly.  There should only be one version of ACR in the plug-in menu.
    That Canon camera model has been supported ever since ACR versions 6.7 in CS5 and 7.1 in CS6.
    If ACR only shows once in the plug-in menu and you still cannot open your file(s), then you in all probability have corrupted files.
    The fact that you can see the images in Apple's Preview means nothing, only that Preview is showing you the embedded JPEG preview embedded in the file. Such JPEG previews generally do not get corrupted even if the raw file has been corrupted.
    I hope you have the original CR2 files or good backups. 

  • Slow http post / unable to post large files

    We have a configuration with ASA 5520 in release 7.1.2. A Web Server on the DMZ. On the Web Server we can post file through a http connection on the Web server, in this http connection we select the file to upload from the http client to the Web Server.
    The upload work for very small files, but not for files that have more than 100Kb. On the logs I don't see any errors, I just see that the Web Server IP with source port 80 build a connection to the client, and teardown after few minutes.
    Any idea ?
    Thanks for your help.

    Hi.
    The ASA will either pass or drop the packet. It will not queue the packet. The only reason can be "ident" protocol. You need to check two things.
    1. Some http servers require that the originating client ip should have a proper in.arpa record. You can do this by doing a
    nslookup initiating the request.
    2. Some http servers try to identify the userid of the process that initiated this request. This is called IDENT protocol. If this is the case, you should see a teardown on port 113. If you see something like this then issue the command
    service resetinbound outside
    --Pls rate if this helps--

  • Quickofficeprohd but still unable to open attachment file format.

    I am a newbie. Download gmail and quickofficeprohd to view spreadsheet file from my gmail account. But fail to get it work. Any suggestion?

    Was the spreadsheet created in Microsoft Excel, or some other application and if so what one? If it's an Excel file, is it possible that the spreadsheet is protected with a password? If so, I'm not aware of any iOS app that can open a passworded Excel file.
    If that doesn't help, please provide more details. Just saying that you can't get it to work with no other information forces us to just guess.
    Regards.

  • Unable to open large pdf files..

    I'm holding an E61 pda-phone. I downloaded acrobat reader v1.5. However, i still unable to view large pdf files, anyone pls advise... Thks

    My guess is you're running out of memory when you load the file: is it bigger than the memory the phone has available before you try to open it?
    You may be able to get around the problem by reducing the amount of phone memory in use: close any other applications you have running and move non-system files (documents, music, photos) from phone memory to card memory.

  • Large Files & iPod

    I recently purchased a 60 gig iPod.
    I listen to electronic dance music, which is mixed continuously. Therefore, I have been ripping my CDs as single tracks to avoid the infamous gap between track numbers.
    I also record my own mixes from turntables and like to put those files on my iPod. These mixes are often long, but I still keep them as large files so they will play gapless.
    However, I am having a problem with one file in particular. It is the first part of a 2 part set. The file is very long... over 3 hours, Apple Lossless format.
    I was able to transfer the file over to the iPod, and play it there a few times. But now my iPod won't play the file anymore. If I click to play it.... the iPod just sits there trying to load it... and after a few moments, it skips to part 2 of the set... which is another file in the playlist.
    I don't understand why my iPod won't play Part 1 anymore.
    Is it because of the large filesize?
    Any ideas??

    There is no work around unforunately. It is a hardware limitation of the iPod. Sorry.
    B-rock

  • Unable to open project file. even though I just saved it.

    Hi,
    I just started back to work on a little FCE 2 video project after a couple of months. When I went to load the file, it said "Unable to open project file". I thought, "hmmm, I'm a beginner, maybe I'm not opening the right file." So, I made a new project with a clip and save it. Then I tried to reopen it. No go. Same message.
    So, something is wrong but I can't figure it out.
    My preferences are set to save the file on an external hd. The file icon shows up but says that the FCE project file has 0KB. How can that be?
    I look using spotlight for the file, thinking maybe the file was saved elsewhere. It doesn't show up.
    Sorry if this subject has been treated before. I searched the forum and didn't find a problem that matched my circumstances. One that was close.
    Thanks for any help you can give.
    Doug

    Thanks for your reply Kyriakos.
    Yep, I've tried the files in the AutoSave Vault and still Unable to Open Project File.
    Also tried deleting the FCE preference and cache file, fixing permissions and doing a save as instead of a straight save, as outlined in the article below:
    http://www.kenstone.net/fcphomepage/good_apps_gonebad.html
    It only has worked on one project which is the only file that opens now.
    It's driving me nuts! I'm going to start doing some major jobs soon and can't have this happen. Maybe I'll try to reinstall FCE then if no luck it's time for a refund.
    Would upgrading from FCE 1 to HD have anything to do with it?
    Have you had any luck, Doug?
    Pat

  • "unable to open project file" (fce icon has transparent sheet behind it??)

    My most recent save of a project keeps coming up as "unable to open project file". I looked in the autosave and its not there either. The icon for this project has what looks to be a transparent sheet over it or behind it. There are stills in the project, not sure if that has anything to do with it. If anyone knows whats going on I would great greatly appreciate the help.
    Thanks,
    C

    Thanks for your reply Kyriakos.
    Yep, I've tried the files in the AutoSave Vault and still Unable to Open Project File.
    Also tried deleting the FCE preference and cache file, fixing permissions and doing a save as instead of a straight save, as outlined in the article below:
    http://www.kenstone.net/fcphomepage/good_apps_gonebad.html
    It only has worked on one project which is the only file that opens now.
    It's driving me nuts! I'm going to start doing some major jobs soon and can't have this happen. Maybe I'll try to reinstall FCE then if no luck it's time for a refund.
    Would upgrading from FCE 1 to HD have anything to do with it?
    Have you had any luck, Doug?
    Pat

  • EhP1 - Unable to create XML file in Solman

    Hi all,
    I need some assistance
    I am trying to upgrade our XI system to EhP1 - SP04. I use Maintenance Optimizer in our Solution Manager (SAP EHP 1 for SAP Solution Manager 7.0) to select the necessary files for my upgrade. The XI system has been set up in SMSY an given a Logical Component. Also, added to the Solution Landscape. I use the SAPehpi-installer to upgrade XI.
    However, when I get to section three, I am supposed to provide the SMSDXML.xml file. This file is not created by our Solution Manager for some reason. The file, as I understand it, is supposed to be generated automatically during Maintenance Optimizer. But when I check the EPS and EPS/in folder of our solman, the file is not to be found. I have also checked the parameter DIR_EPS_ROOT in RZ11. It is correct. The authorization has been set to full on group Everyone, just to check if that could be the problem, but with no luck.
    When I use transaction /n/tmwflow/mopz_stack i am able to view the XML file (I assume that it is the correct file), but any attempt to copy the text displayed, and to save it as an XML-file has not resulted in any success.
    The only thing I have to go on, is a warning displayed in Maintenance Optimizer, stating: "Warning - No SLM configured in system - <SID>. Every document etc, Iu2019ve read sais that one can use Software Lifecycle Manager as an alternative to Download Basket. I havenu2019t seen SLM listed as a prereq, so I donu2019t believe that this could be the reason why the XML-file is not generated.
    Is there some setup/configuration Iu2019ve missed?
    Any help will be much appreciated!
    Best Regards,
    Stian
    Notes checked:
    1134872 FAQ for stack Delta Files
    1022704 Upgrade phase EHP_INCLUSION and SPSTACK_REQUEST
    1277035 Solution Manager: EHP4 product data missing

    I downloaded the SPSTab.xml from SMP, but it didnt work. It gave an error: "The selected configuration file ("C:EHP1SPSTab.xml") is not usable. Reason: "Stackfile not found""
    I have used the dockument in the link you provided as a basis for my upgrade. So I still need this to work in order to upgrade my XI Netweaver 7.0 to Enhancement Package 1...
    In the document you provided:
    Section 3 SAP Solution Manager
    3.1 Support Package Level of SAP Solution Manager (Check - Mine is EHP1)
    3.2 System Landscape (SMSY) of SAP Solution Manager (Check - as stated above in opening post)
    3.3 SAP Solution Manager Maintenance Optimizer (Check)
    3.4 SAP Solution Manager Troubleshooting: (Check)
    3.4.4 No Stack Configuration File is generated: This is the core of my problem... I have read the notes listed, and run the IMG activity under Maintenance Optimizer, as per note 1134872. I get an warning stating "SAP ChaRM auto-configuration warnings" This could be the source of the problem, but in the thread Re: Message no. IMG_FASTCONF028  in Charm SolManiac says that it is nothing to worry about.
    So to summarise:
    I an still unable to generate XML file in Solman, and I am uable to get the XML downloaded from SMP to work with SAPehpi.
    BR
    Stian
    (EDIT: I am however not shure if the settings under SMSY etc are 100% correct, but in my mind, that should prevent Maintenance Optimizer from generating the XML file)
    Edited by: Stian Eiken on Jul 13, 2009 1:18 PM

Maybe you are looking for

  • Custom report question

    Hi all, We have a custom report which pulls sales data. In the output of custom report in order to hide a column i right clicked on one of the columns and selected column attribute and made width=0. After that when ever i execute the report the colum

  • Iphone6 ios 8.0.2 bluetooth problem

    I have a 2013 Subaru wrx and the iphone6. With my old iphone 4s when i got in and turned on the car it would connect to the bluetooth within a few seconds. Now I have to manually connect every time i start the car. I have tried all the solutions i ha

  • Can't remove OD replica

    Hey all, I'm on a 10.10.3 server that is set up as an OD master, and am trying to remove a replica that is no longer available (nor are the backups). I am unable to remove the OD replica from the GUI, and have also tried the following command as root

  • SHA-1 Encryption of passwords

    I believe that in Netweaver 6.4 and above SHA-1 is used for password encryption.  Does anyone know if a 'salt' is used when encrypting?  If not, can use of a 'salt' be configured, and also verified?  Thanks in advance.

  • Automate RAW to JPEG conversions

    Does anyone know of an easy/simple way to automate RAW conversions to jpeg? When I setup an action, it stalls on the RAW file open command and I cannot seem to automate this step. I have looked at 3rd party s/w like Irfanview but the output quality s