Numbers templates for SPC activities?

Does anyone have Numbers templates for working with SPC data? Can you recommend something to use with Numbers?

Thanks for the offer. I am just investigating the SPC process because of a work related project. Never imagined that I would find the process fun. Problem is that being a newbie I am not sure of the specific needs.
I was trying to add an "upper limit, lower limit and average" to a X-bar control chart. I created the table with my measurements, calculated  the upper and lower control limits and average. I could not add these to the chart so I create a line using "shape" - lines are not too exact. Prefer to create these using the calculations.

Similar Messages

  • Numbers : Template for My Patient's Dossier

    I'm an eye care practitioner need a template in "Numbers" for my patient's dossier, that after opening of the patient's name I can see all patient's medical history.
    Is there a suitable Number's template for this purpose?

    I'll include a copy of my flow chart in Numbers and the columns of the dosing chart.  I want to be able to enter lbs in C2 for dogs and C3 for cats and have kgs and common drug doses displayed.  Then I'll print the sheet and use it to record anesthesia parameters and times and comments, too.  It then will be part of the permanent medical record. 
    The dose for DexDomitor for dogs is based on body surface area.  I could calculate Meter squared=10.1 X kg to the 2/3 power X 10 to the -4th power and then multiplying that time 0.375 would give MLs dose, too.  If that works, I need a formula for that math in Numbers.
    If I use MATCH or LOOKUP with a chart, where do I put the chart, on page or off page?  Can I link formulas together to recreate the chart?  i.e. 4 lbs is 0.12, 5 lbs is 0.12, etc, so that I can put all the formulas in the C2 cell? 
    Lbs
    Dose in MLs
    4-7
    0.12
    7-9
    0.15
    9-11
    0.20
    11-22
    0.29
    22-29
    0.38
    29-33
    0.44
    33-44
    0.51
    44-55
    0.60
    55-66
    0.69
    66-73
    0.75
    73-81
    0.81
    81-99
    0.90
    99-110
    0.99
    110-121
    1.06
    121-132
    1.13
    132-143
    1.19
    143-154
    1.26
    154-176
    1.35
    >176
    1.42

  • I need a Numbers Template for Event registration

    I am hosting a Women's Retreat that has people registering, paying for tickets,etc.  Is there a numbers template that would allow me to collect that data and show it in a nice format?

    Numbers does not have anything specifically called an event registration template.  There are several options:
    1) search using your favorite search engine (google found quite a few hits when I searched using "Event Registration Template"
    2) build your own in Numbers
    Option (2) shouldn't be too difficult.
    It could look something like:

  • Numbers template for personal statement

    Can I find a template for a personal financial statement?

    Numbers provides several built-in templates:
    You can see (and open) the templates by seelcting the menu item "File > New From Template Chooser…"

  • Numbers template for bed & breakfast

    Does anyone know of a good source of templates for Numbers that may have something suitable for running a bed & breakfast?
    Thanks in advance.

    Have you tried a general search on "numbers templates"? You can also use almost any excel template that does not include macros.
    Jason

  • Numbers templates for baseball

    Are there any templates I can use in Numbers to keep track of baseball statistics? I don't need anything as sophisticated as the commercial software, just a template that calculates batting average, on base percentage, ERA.

    Welcome to the Apple forums
    Take a look at iWork Community for user-contributed templates.
    A Google search for Excel templates may find what you need. You may need to change the file extension to .xls or .xlsx for Numbers to open them. The iWork apps don't recognize Office template extensions.

  • Looking for Numbers template for Estate Administrator's recordkeeping?

    I am the administrator of a relative's estate and need to do formal recordkeeping of the financial aspects of the probated estate.
    I use Apple Numbers for creating budgets and other kinds of recordkeeping, but cannot find a template that I feel confident is appropriate for this task.
    Does anyone know if there is an existing template that would work for this as is or that would be adaptable for the task? I also need to include reports on a small number of stock holdings until the probate process is complete and the estate assets are distributed between the beneficiaries.

    Thank you Jerry. I appreciate your efforts. Because I try not to waste people's time on forums, I had already exhaustively researched this topic and when that wasn't fruitful posted here.
    I found the same form you shared a link to, and related ones, from NH. Their stuff is helpful. I've also already visited my state's and county's related websites, which also share info and forms but they don't share any forms for or adequate details about reporting.
    The NH info can be a guide. My real interest is templates to make recording everything and creating reports efficient and easier to keep up with, especially ones that will self-calculate.
    In the template arena, it seems estate recordkeeping isn't on the radar. I couldn't find any Microsoft templates either. It's too bad, because lots of people have to take on this task and it's not a small one by any stretch.
    Debbie

  • I am trying to make a numbers template for my Veterinary office.

    How do I make a range chart.  I want to have Numbers calculate a dose of anesthetic when I enter weight in pounds from weight ranges, i.e. 4 - 7 lbs = 0.12 mls, 7 - 9 lbs = 0.15 lbs, 9 - 11 lbs = .2 mls.  The other drug doses are based on mls/kg and I can calculate those from lbs or kgs.  Thanks for your help.

    I'll include a copy of my flow chart in Numbers and the columns of the dosing chart.  I want to be able to enter lbs in C2 for dogs and C3 for cats and have kgs and common drug doses displayed.  Then I'll print the sheet and use it to record anesthesia parameters and times and comments, too.  It then will be part of the permanent medical record. 
    The dose for DexDomitor for dogs is based on body surface area.  I could calculate Meter squared=10.1 X kg to the 2/3 power X 10 to the -4th power and then multiplying that time 0.375 would give MLs dose, too.  If that works, I need a formula for that math in Numbers.
    If I use MATCH or LOOKUP with a chart, where do I put the chart, on page or off page?  Can I link formulas together to recreate the chart?  i.e. 4 lbs is 0.12, 5 lbs is 0.12, etc, so that I can put all the formulas in the C2 cell? 
    Lbs
    Dose in MLs
    4-7
    0.12
    7-9
    0.15
    9-11
    0.20
    11-22
    0.29
    22-29
    0.38
    29-33
    0.44
    33-44
    0.51
    44-55
    0.60
    55-66
    0.69
    66-73
    0.75
    73-81
    0.81
    81-99
    0.90
    99-110
    0.99
    110-121
    1.06
    121-132
    1.13
    132-143
    1.19
    143-154
    1.26
    154-176
    1.35
    >176
    1.42

  • DTW template for activities

    Hi there,
    i am searching for a DTW template for uploading activities. It is possible to upload activities via DTW.
    I do not find any template.
    Regards Steffen

    Steffen,
    Use the template called Contacts1 in the oContacts folder.
    Regards,
    Nat

  • Numbers templates

    Anyone know of a numbers template for a check register?

    There is one built-in in Numbers '09. Otherwise, look at iWork Community. The last time I looked there was a very simple one & a very, very complex one.

  • Numbers template

    does anyone have a simple "numbers"  template for rental properties?

    If you're wanting to delete a template you created & saved, Numbers stores those you created & saved as templates in HD > Users > [your account] > Library > Application Support > iWork > Numbers > Templates > My Templates.

  • How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
    iWork > Pages
    contenant Templates > My Templates
    comme il y a un dossier
    iWork > Numbers
    contenant Templates > My Templates
    Depuis le Finder, tapez cmd + f
    puis configurez la recherche comme sur cette recopie d'écran.
    puis lancez la recherche.
    Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
    Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
    Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
    Désolé mais je ne répondrai plus avant demain.
    Pour moi il est temps de dormir.
    Yvan KOENIG (VALLAURIS, France)  mercredi 23 janvier 2011 22:39:28
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • QFD / House of Quality templates for Numbers

    I'm looking for QFD / House of Quality templates for Numbers. I have found several for Excel and am having problems trying to convert them for use in Numbers. I am trying to avoid having to buy Microsoft Office.
    Any help would be appreciated.
    Thanks

    You can try one of the free office suites.  My favorite is LibreOffice

  • Gantt chart template for numbers

    I really need a template for a simple gantt chart to use in numbers, I have been trying to make one for weeks, if anyone has made one before, please explain the process.
    thanks gary

    You basically have the following:
    =PreviousBalance+Credit(Deposit)-Debit (depending how you want to show the account.)
    Simple Example:
    You can do a search for "Checkbook", "Finance", etc., to see other threads about this subject.
    Regards,

  • Where can I download additional templates for Numbers '08?

    Does anyone know where I can find additional templates for iWork 08's Numbers? I find the ones that are included with the software to be so helpful. I figure there's bound to be more out there that could prove even more helpful.
    Many thanks in advance.

    If you try to make it first and run into a problem. People here will always be more than happy to answer your questions on how to get it to work.
    Two bonuses to doing it this way:
    1) You learn the program so much better
    2) It doesn't cost you anything
    I don't know what the TOS says about looking for commercial work on the boards, but if they have their emails 'shown' that means they don't mind someone contacting them directly, just look at their profiles by clicking on their name in the postings.
    I would look around and find someone that seems to have the experience. You might just find your answers while looking and not need someone.
    Jason

Maybe you are looking for

  • Error Occured in CRM_ORDER_MAINTAIN . Kindly help asap.

    I have written folowing code but exception occurs in changing parameter lt_exception of FM maintain.What can be the possible error. msg no - 0004 REPORT  ZTEST_PROGRAM. *Internal tables Data : lt_partner           TYPE              crmt_partner_comt,

  • Problem syncing 9360 with Windows Calendar using version 7.0

    Hi. Since downloading BB desktop version 7.0 I am no longer able to sync my contacts, calendar, tasks and memo functions from my Curve 9360 to my laptop using the USB connection. When I attempt to do so I get the following error messages: 'Synchronis

  • How can I add a password to my PDF file ?

    I'd like to know How can I add a password to my PDF file ? Regards,

  • My problem with Toplink upgrade from 2.5.1 to Release 2

    Hi: I met some confusions in upgrading our system from TOPLINK2.5.1 to TOPLINK Release 2(Oracle9.0.3). And because I didn't use TOPLINK tools before this project, I spent one week to know the structure of our system. Unfortunately, Our company isn't

  • Help! i cant install visual studio!

    Help! Can anyone help me please! I downloaded Visual Studio Express 2013 for Windows desktop computer suddenly made a restart and when it came on I tried to install, then an error there is a problem with the installation and that I should contact mic