Numbers with US country code (+1) are not recognized

Hi Everyone,
some of my contacts have +1 (US country code) stored in front
of their number, as that is the only way to ensure texts reach
them, while one is abroad.
In the US, though, when they call their numbers are not always
mapped to the contact by the iPhone. The incoming number is without
the +1 prefix which I guess confuses the phone.
I was wondering if other people were experiencing this and if there
is a fix for it?
Hopefully this will also reach Apple, so they can take a look at it.
Thanks for looking,
jazzy79

jazzy79 wrote:
I was wondering if other people were experiencing this and if there
is a fix for it?
Store BOTH numbers in your contact list...one with the +1, and one without. If you hit the edit button for a contact, a new field will pop up for phone numbers, add new number. You can add a custom label as well by clicking on the chevron in the "new" number field.

Similar Messages

If I store name's phone number with a country code eg. 218-925555555 and I receive a call as 0925555555 then only number is appeared and no name appears

if I store a name with phone number with a country code eg. +218-925555555 and I receive a call from that pearson then only number ( 0925555555 ) is appeared but no name.
and visa versa when I store 925555555 and I receive a call from that pearson then only number ( +218-925555555 ) is appeared but no name.
moreover, the same happens with messaging

cmauze2 wrote:
Ann154 wrote:
What happened to your old SIM card? You should have been able to move that card to the new replacement device.
[quoted]:
"Sales clerk asked me if I had a Sims card for it. I told him that there`s one in my old phone. He explained to me that it was not going to be working..."
Or were you referring to the one in the old temporary replacement device? Would that even be compatible with the newer phones?
The one that wasn't working had a 4G LTE SIM card in it. It should have usable in the replacement Razr. It was only until I read the OP a third time this morning that there might be a third device involved. It would be nice if people would give more specifics on what devices are active at what time. Then the readers of this community can follow the progression of the events better.

Iphone 5 - other users recieve texts massages from me with another country code

Hello, I recently travelled to Israel and used a differnet SIM card in my Iphone, but ever since I got back to the states... othe people got my txt from my hotmail account. I read through the discussions here and figured out how to change that, the other problem is that my phone numer under the text massage setting appear with Israel country code (+972) before my american number!?
so when I go to setings>massages>send and recieve>...
my options are either my hotmail account or +972and my us number ...
so when other people recieve txts from me it seems like somebody txted them from a different country ...
anybody has an idea how to change that ?
Thank you!

Hello there, GititK.
The following Knowledge Base article offers up some great information in regards to linking phone number to iMessage:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?

Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?
Thanks!
-Adrian

the old apps are on my computer but they have had upgrades since they were put on the ipod originally. you think you would get a warning about this when you restored. I was not worried about losing the progress of the apps but i would have been worried about the app it self!!!!!

TS1363 "An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari

FOC items with bill rate as "0" are not appearing in project invoice

Customer has a unique requirement of billing resources working on the project for free due to business reasons.
The issue is that the FOC items with bill rate as "0" are not appearing when the invoice is generated.
Please let me know if any one has come across this kind of a requirement and please share if you have any workaround.

Hi
You may try setting the bill rate for those cases as 0.01.
That way the items will be included in the invoice, but not affect dramatically the amount billed to customer.
Dina

HT4085 Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i record, please help

Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i recorded starting from today, please help

It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
Note that this can't happen if your iPhone is not connected to a WiFi network:
When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
from here: http://support.apple.com/kb/ht4106

Performance Point: Code blocks are not allowed in this file.

Hi All,
I'm trying to use Performance Point 2010 in Sharepoint 2010...
I have start the application in centrel admin
I have created a site collection based on the Bisuness Intelligence Center template
I can surf the new Site Collection but when I try to open the "Start using PerformancePoint Services" link I get the following error:
"An error occurred during the processing of /PerformancePoint/Pages/ppssample.aspx. Code blocks are not allowed in this file."
is there any way to fix it???
is there any good source to understand and deploy Performance Point 2010??
thanks All
Vit

I have tried the above PageParserPath settings, however none seem to fix this problem for me. Does anyone have another solution to this issue?
I've tried...
<PageParserPath VirtualPath="/Pages/ppssample.aspx"
CompilationMode="Always" AllowServerSideScript="true" />
<PageParserPath VirtualPath="/PerformancePoint/ppssample.aspx"
CompilationMode="Always" AllowServerSideScript="true" />
<PageParserPath VirtualPath="/mysitecollection/ppssample.aspx"
CompilationMode="Always" AllowServerSideScript="true" />
Help Please!!!

Some CD's with music burned to it, are not being recognized as having music files on them.

Some CD's with music burned to it, are not being recognized as having music files on them.

The format says Mac OS Extended. All of the settings were set during the disk image restore process. Even if I format the flash drive as extended journaled or some other format, all of these settings are reverted when I do the restore from the disk image. I will just copy all of the information that disk utility has so that you can see it.
Mount Point : /Volumes/Mac OS X Install ESD Capacity : 16.11 GB (16,106,110,976 Bytes) Format : Mac OS Extended Available : 12.3 GB (12,303,499,264 Bytes) Owners Enabled : Yes Used : 3.8 GB (3,802,611,712 Bytes) Number of Folders : 128 Number of Files : 876

HT6114 Does the 10.9.2 update fix the issue on 2011 macs where projectors with HDMI are not recognized via thunderbolt adapter?

Hi Mac,
Does the 10.9.2 update fix the issue on 2011 macs where projectors with HDMI are not recognized via thunderbolt adapter?
Thanks in advance,
Ricardo Arguelles

Sordidloam wrote:
So to be clear, this issue occurs on any input with the Denon Receiver. Occurs from both HDMI out and MiniDisplay Port out. Goes away when we reinstall the OS and update it to 10.9.2. Comes back as soon as we update to 10.9.3.
Cheers
MLE
Have you been able to use the Mac Mini directly attached to the plasma/LCD/projector with out going through the Denon AVR? Even with 10.9.3 installed?
I have a Pioneer AVR and I have the Mac attached via a HDMI to HDMI and all is working for me. Can your Denon do some upscaling? Some AVR, like my VSX-53 can change the scaling of the input video. Meaning if I still had my Apple TV 2 which outputs 720P only, can be upscaled in my AVR to 1080i or 1080P or even 24fps. Heck, I could even plug in an old style Red, White, Yellow cable and upscale it to 1080P and output it HDMI.
I am wondering if your Denon is able to do that and it might be set wrong. Check the owners manual for such settings. Even the plasma/LCD/project could be doing the upscaling too. So check that too.
KOT

Profit center dummy and company code XX01 are not consistent

Hi Gurus ,
can you please tell what i should do when the system gives the message that Profit center dummy and company code XX01 are not consistent . this is happening when i post document in FB50.

Owing to program or transport errors, the company code assignment of profit centers may not be stored correctly.
This inconsistent data then causes program terminations or short dumps in further processing.
This note contains the report ZPCA40B_CHECK_CEPC_BUKRS, which checks the consistency of the company code assignment and corrects possible errors.
REfer to OSS <a href="https://websmp207.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=388178&_NLANG=E">388178</a>

Hi! I have a problem with the adjustment brush some are not there anymore like soften skin, how i can fix that?

Hi! I have a problem with the adjustment brush some are not there anymore like soften skin, how i can fix that?

Hi dear,
it's funny, real funny.
I think the programmes have diffrent sound system from the normal calls system.
All you need to do is to turn the sound up from the bottom in the phone side in the time you're making or recieving the call.
you'll hear the sound.
I hope that would help.
All the best

Can iMessage be used with non iOS 5 users, ie non-apple users. My new i-pad 2 error message says these contacts are not recognized by imessage when I try to text some of these contacts.

Can iMessage be used with non iOS 5 users, ie non-apple users?
My new i-pad 2 error message says these contacts are not recognized by imessage when I try to send them a text.

So that means that I can send text messages through my i-phone to reach non iOS 5 users, but not through my i-pad 2.

I keep getting a message "safari cannot open page [page name with header information] because you are not connected to the internet.

I keep getting a message "safari cannot open page [page name with header information] because you are not connected to the internet. Then I check CNN for a time stamp, and I am connected to the internet. I have reset everything suggested in other posts, ensured any other device that could be hogging bandwidth is off, the router is reset, the iPad is reset. The other devices are not having this problem, and it happens on both places I use the iPad, the university library, (getting a second degree after a change in a long time career and at home. Any insight into this issue would be appreciated.

Saing yu tried everthing provides little information to us. We do not know what you tied.
Have you tried:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering off and then back on your router- Resetting network setting: Settings>General>Reset>Reset Network Settings
The toubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
- Does you iPod conenct to other networks?
- Do other devices connect to your network?

"URL's with the type "file." are not supported"

"URL's with the type "file." are not supported" Can anyone tell me how to remove this message?
I installed Lion and I see a lot of people have the same problem.
Help

Not a nice answer!
Posting "Check the 'More like this' area" and not simply providing the answer is a great way to make these groups worthless. Hence, for a while, all I would get is versions of this same arrogant message.
Here's the answer so someone else doesn't get locked into the same loop I did:
I just solved my problem, which was the same perplexing message that kept popping up. It happened to be a Time Machine issue. When I installed Lion, apparently the Time Machine had been turned on by the installer because it kept searching for the Apple.com server, to which I'm not subscribed. Prior to the installation I had always backed up to an external HD; not Apple's online service. Searching Apple Support Forums, I found "Troubleshooting Time Machine' and followed the instructions to "reset Time Machine". Now things are back to normal. I hope this is of some help.

Numbers with US country code (+1) are not recognized

Similar Messages

Maybe you are looking for