Numeric Format Error

Post Author: diox
CA Forum: Xcelsius and Live Office
Hi guys,
We have a problem in XCelsius 2008, when we select number format: Numeric and check to use 1000 separator. It seems that works fine but really doesn't.
For instance;
1 shows .1 and we want 1
10 shows .10 and we want 10
100 shows .100 and we want 100
1000 shows 1.000 and we want 1.000
10000 shows 10.000 and we want 10.000
100000 shows 100.000 and we want 100.000
1000000 shows 1000.000 and we want 1.000.000
We try to do Number format: General and get format from excel but in excel works well and in XCelsius doesn't
Anyone solves that?
Thanks

Post Author: diox
CA Forum: Xcelsius and Live Office
My error it's some diferent... may be same BUG.
I link 3 images
http://bp3.blogger.com/_jnKo-Me1MDk/SDwpL4IO_NI/AAAAAAAAAB0/3l8c1GWcrlM/s1600-h/Dibujo1.JPG
http://bp0.blogger.com/_jnKo-Me1MDk/SDwpcIIO_OI/AAAAAAAAAB8/qu7_qpYBcu0/s1600-h/Dibujo2.JPG
http://bp2.blogger.com/_jnKo-Me1MDk/SDwpioIO_PI/AAAAAAAAACE/yj3UsQyEsds/s1600-h/Dibujo3.JPG
How u can see i show excel options and result when mouse over graph.
I hope u can help me, any suggestions would be appreciatte.
Thanks..

Similar Messages

I've purchased numerous books through itunes and now I'm unable to open ibooks; I get a "book format error, delete and redownload" which I've done numerous times with negative results.

I've purchased numerous books through the itunes store in which I was able to read. Now I'm unable to open some of the ibooks that I've purchased, I get an error message...book formate error, delete and redownload, which I've done numerous times with negative results. What are my options?

within the receipt that Apple sent to you via email is a Report a Problem link. use that link to report your issue.
also you could try a basic reset and see if that resolves your issue. hold down the Lock button & Home button at the same time for ~15 seconds, the iPad should then perform a reset.

How can I tell that a default numeric format has been applied to a numeric limit step?

I am working on generating custom HTML code for our test systems in order to reduce the 'footprint' of the standard HTML entries for numeric limits, multiple-numeric limit steps etc....
For a Numeric Limit step, I can set the Numeric Format via the 'Limits' tab and select the pulldown arrow to select any format. Does TestStand actually save this information with the step so I could possibly use this later? I ask this because my modifications are within the 'ModifyReportEntry' Callback. When I am modifying the code to generate new HTML within this callback, I have no idea if the developer has selected a Numeric Format for a given step OR simply left it as DEFAULT.
To make matters more confusing, here is some more information....
When I pause the execution in the callback I notice the following:
Case 1: User has selected a Numeric Format ( this example I will say 3 digits of precision ) %.3f. for a numeric limit step.
Parameters.Result.Limits.Low = 10.000
Parameters.Result.Limits.High = 20.000
Parameters.Result.Numeric = 15.657
Notice the numeric data is ALREADY formatted! Great, I can simply use this to generate my custom HTML table for the numeric limit step.
Case 2 : User has left the numeric format to <Default> for the step.
Parameters.Result.Limits.Low = 10
Paramters.Result.Limits.High = 20
Parameters.Result.Numeric = 15.65713515155
Numeric data is NOT formatted. I know that TestStand will apply the Default Numeric Format that is configured in the report options when it writes the report but since I am doing a custom report I am stuck.
My question is how can I possibly tell that the data has already been formatted by TestStand in the ModifyReportEntry callback? Is there some flag that I could check or anything?
I do notice that the Parameters.ReportEntry string contains TestStand's default HTML code for the step and this is already properly formatted.. so as a possible workaround I could 'pick out' the data from this string but this is slow and time consuming.
Thanks
PH

PH,
You can find out if the numeric format has changed using the TestStand API. I use the following statement in my step's post-expression to find out the numeric format that TestStand uses for the step.
Step.Limits.Low.NumericFormat
If the string returned is an empty string, then it is the default format, otherwise, it's the one specified in the string.
Hope this helps.
Raj
National Instruments
Applications Engineer

How can I change the numeric format of the cursor coordinates display in LV 8.2

Since LV 8.0 or so the cursor display window of a graph indicator seems to be a tree control. I couldn't find where to change the numeric format of the numbers displayed in that control. What did I miss?

lecroy wrote:
Maybe I'm not clear on what your looking for but I just use a property node and route the raw cursor data out to what ever function I want to run on it, then display it in a seperate field. The nice thing with the property node is you can have multiple graphs linked together by one set of cursors all with different readouts.
Yes, of course that's an option and I guess I'll have to do it that way.
The point is that I converted a pre-LV-8.x program to LV 8.5. In the program I had used the coordinates display field in the cursor legend to display the position, just the was the cursor legend is supposed to be used, IMO. And in pre-LV-8.x days it was possible to customize the numeric format property of the cursor legend (either directly or by property nodes). It seems that with LV 8.x NI chose to use a treeview control for the cursor legend. With that 'improvement' the numeric formatting flexibility was lost since now the conversion to the string content in the cursor legend's treeview is happening somewhere 'under the hood'.
<rant> Why do they (NI) always try to 'improve' things (where nothing needs be improved) and sacrifice functionality on the way....? </rant>

Bex Analyser : Date Format error.

Hi All,
We are facing date format error, while running the query in Bex analyzer.
We have one column in report i.e Net Payment Date, so when we run the query in analyzer the single date like "5-6-2010 is getting swapped like 6-5-10 & year also showing two digits i.e instead of 2010 it shows 10" & date like "12-09-2010 is coming perfectly."
Means the date which is in single digit we are facing this problem like 1 to 9 & the dates which are 10 & above showing perfectly.
In RSRT the query showing proper result, so i don't think it's BI problem.
The regional setting is DD-MM-YYYY & Date separator is '-' & we don't want to change this format.
Is there any SAP note or any solution for this..??
All the replays are gr8ly appreciated.
Thanks,
Santosh

Hi Santosh,
how about web display? is it ok? for me it seems more an Excel problem, so maybe you should check if there is special formatingin this.
Regards,
Anass

How to store numeric format data in a database

In order to properly format a report generated from data stored in a database using a TestStand schema,
I would like to add formating information for numeric values to the database.
My intent was to store the numeric format string data in a separate column in the MEAS_NUMERICLIMIT table in the database.
By using this format string I can then format the numeric values in my report.
I have successfully retrieved the numeric format string by calling the 'NI TestStand API 3.0', using the ActiveX/COM adapter.
In the 'PropertyObject' class there is an action called 'Get Property'.
This action can retrive the 'NumericFormat' property for a given object reference.
The problem is that I don´t know HOW to do this in the dat
abase logging schema.
Can I use this method in the API to retrive and store the numeric format string in the database??
Or is there any other way of achieving this functionality?
All ideas for solutions are appreciated.
Thanks in advance!

Yes you can. I think it would be helpful if you explain in more detail what you are trying to do.
>>>> Basically I am trying to reproduce the data sheet created by test stand by using the data in the database.
Are you using an NI default schema or have you already customized it?
>>>> I already have a custom schema that I created many years ago, But if I have to start with a 'newer' default schema it wouldn't be to much of a problem to incorporate my changes into it. (I had added Model number and Comment to UUT result table and provided support for custom step types, the custom step types are based on the default NumericLimit step type )
If default, what about the schema is insufficient for what you want to do?
>>>> In order to generate a datasheet from the data in the database that replicates the datasheet produced by teststand, I need the Formatted values for the test results and the test limits. So I'm thinking it would be easier for me to query the database for the formatted numbers (as strings) instead of having to query the database for the 'numeric value' and the 'format string' and then creating the string for my datasheet.
Is the data and limits that you are trying to log custom properties or or is this for the NI numeric or multi-numeric step type?
>>>> No using custom properties, just dealing with 'NumericLimit' step types
I had looked at how the 'SequentialModel.Seq' calls the modelsupport2.dll to to produce the data sheet entries.
     ProcessModelPostResultListEntry >
     Process Step Result >
     Get Step Result Body (Sequence) >
     Add Flagged Values >
     modelsupport2.dll >
     GetFlaggedValuesForReport_Html
But, alas, I don't understanding the whole traversing concept.

Trying to convert a pdf to a word doc using Acrobat XI Pro. I am getting formatting errors and scrambled text, especially right below headings. Not all headings affected, just some, but all the same paragraph tag. Any ideas?

I am trying to convert a pdf to a word doc. The pdf was created in Framemaker. I am using Acrobat XI Pro and getting formatting errors and scrambled (or missing) text, especially below a heading. Any fixes?

Hi pakbecker,
Please try updating to Acrobat 11.0.7 and check.
In case you still face issues, i would like to have a look at th doucment.
Send me an email at [email protected]
Regards,
Rave

FF_5 - Import Bank Statement, Err: Formatting error in the field COBL-KOSTL

Hi
When importing the bank statement I'm getting the error
Error: (00 298) Formatting error in the field COBL-KOSTL ; see next message
Why is it doing this? In OKB9 I have the GL Account and the cost center assigned. It is the ne GL that is giving this problem, in the classic GL I do not have this problem.
Thanks in advance

Hi
No, it is not that. For some reason in the new GL it does not seem to determine the cost centers and profit centers as usual.
For exampl to allocate the Profit Center for Balance Sheet Account I used to use 3KEH in the classic gl but in the New gl we must use FAGL3KEH.
Now with cost center i'm having the same problem, does not determine the cost center when importing the bank statement.
Can someone help me.
Thanks in advance
Edited by: Louis De Gouveia on Mar 3, 2009 7:07 AM

Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal

Hi All,
I am trying to implement Oracle 10g RAC on my laptop using vmware and openfiler software . But while executing the command
#mkfs.ocfs2 -b 4K -C 32K -N 4 -L oracrsfiles /dev/iscsi/crs11/part1
I am getting the error
Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal
Please anybody can help me to resolve this problem.
Thanks in Advance.

How large is the device that you are formatting?
The default journal size depends on the type specified. If none specified,
then it assumes "mail" which sets the default journal per slot to 256M.
If database type, default is 64M.
Use "-T database" to specify database type, etc.
BTW, one can always override the defaults. Say "-J size=16M" to make
a smaller journal.
man mkfs.ocfs2 and the user's guide has more.

Numeric overflow error in aggregation level formula

The formula for Revenue/Quantity is giving me the following error:
Error: [314]: numeric overflow: search table error: [6944] AttributeEngine: overflow in numeric calculation;Error executing physical plan: exception 6944: AttributeEngine/Parallel/Aggregation.cpp:573 AttributeEngine: overflow in numeric calculation; $function$=read; $message$=unable to read measures RAOL01:_SYS_CE__popid_24_531C272BF80A349FE10000007F000002_558972en TEST_Revenue fixed16.12 ,in executor::Executor in cube: RAOL01:_SYS_CE_$REQUEST$_popid_24_531C272BF80A349FE10000007F000002_558973: calcEngine search on olapIndex failed.
I am aware that if Quantity is zero then we get this error, but I have already handled it and Quantity is never zero.
Both the measures are Decimal, any suggestions as to how to handle this?

My first guess you have reached the upper limit of the datatype on concerned column and the AttributeEngine is not capable now to handle the numeric overflow, hence throwing the error message.
Try converting it to higher datatypes like double, you can also try to do an workaround with datatype conversion functions like TO_DOUBLE before aggregation func.
If you are using something like sum("COL1") try using sum(TO_DOUBLE("COL1"))

After Effects CS6 format error 45::35

I'm getting "After Effects Error: Photoshop File format error 1. (45::35)" in AE CS 6 with .IFF's from Maya. I know this is nothing new, this problem has been around for a loooooong time.
We like here at ABC like .IFF since it's native to Maya and a small file with alpha.
Close and open AE and it works for a while then the error appears, rather than me doing a work around and converting to another format, my question is: When do you think Adobe will have a solution?
Ray

The better question actually is: When will Autodesk stop "enhancing" the IFF format? There really is two sides to the equation and as long as Autodesk implement undocumented changes (including trivial stuff like incrementing the IFF version number in the metadata), any other company can only paly catch-up. Also the format has this odd "quality" where byte errors do not necessarily affect the visible data, so rendering errors may not actualyl show up unless you open the files in anotehr program. I understand your rationale for using it, but it really is not the best format for heterogenous workflows involving apps from different vendors. TIFFs are so much nicer...
Mylenium

Invalid Keystore Format error

we need to configure an SSO from SAP portal and a third party website by passing encrypted userid as url parameters.
To configure the SSO I have received the public key of the third party and able to access it from server location. Now I have to access priavte key of the SAP Portal certificate and sign the UserId and pass it as url parameter. I have gone through many blogs and written code as below which is giving Invalid Keystore Format error.
My question is
1. What should be passed to FileInputStream?
As of now we are passing the .cer file which is stored as part of project.
Below code is throwing error at ks.load() method.
String fielPath1 = request.getPublicResourcePath()+"/SAPLogonTicketKeypair-cert1.cer";
FileInputStream ksfis = new FileInputStream(fielPath1);
KeyStore ks = KeyStore.getInstance("JKS");
ks.load(null, sPass.toCharArray());
BufferedInputStream ksbufin = new BufferedInputStream(ksfis);
ks.load(ksbufin, sPass.toCharArray());
PrivateKey priv = (PrivateKey) ks.getKey(alias, kPass.toCharArray());
Error is:
Invalid keystore formatsun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:633)sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)java.security.KeyStore.load(KeyStore.java:1185)am_sso_apc.doContent(am_sso_apc.java:132)com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:213)
Please let me know how to pass the filepath to extract the priavte key .
Regards,
Satish

I found the solution. As follows:
keytool -list -keytool keytoolfile -storetype jceks

Numeric format based on data in another field

I am trying to set up a form where the numeric format of one field is based on units of measure in another field. The fields are: units1 and iq1. What I want to do is have the iq1 field format for percent with two decimal places when units1 is LS or ls or L.S. or l.s. otherwise the field should be formatted for a number with the format nnn,nnn,nnn.nn. Any help for this newbie is appreciated.

I think this is what you are looking for:
Make sure that you select "Commit selected value immediately" in the options tab of the drop down menu.
//Place this script in the custom validation script of the drop down menu
//Create a text field caleld Text2
var MySelection = event.value;
switch (MySelection) {
case "Accountability":
    this.getField("Text2").value = "Accepts personal responsibility for the quality and timeliness of work. Can be relied upon to achieve results with little need for supervision. ";
break;
case "Compliance":
    this.getField("Text2").value = "Complies with policies, procedures, workflows and instructions.";
    break;
I hope this helps.

DBMS_LOB.LOADFROMFILE causes numeric value error

The code below causes a numeric value error when I do LOADFROMFILE. Do you have any suggestions. Thanks.
declare
locator bfile;
cloblocator clob;
buffer varchar2(1000);
lsize integer := 0;
amount INTEGER := 1000;
v_filename varchar(50) := 'notify_offer_tbl';
begin
locator := bfilename('IDEA_DATA_DIR','notify_offer_tbl');
insert into imsa.t_unix_logs values ('notify_offer_tbl', locator, empty_clob());
Select fileloclob into cloblocator from imsa.t_unix_logs where filename ='notify_offer_tbl' for update;
if dbms_lob.fileexists(locator) = 1 then
dbms_output.put_line('Exists');
if dbms_lob.fileisopen(locator) = 1 then
dbms_output.put_line('open');
else
dbms_output.put_line('close');
dbms_lob.fileopen(locator, DBMS_LOB.FILE_READONLY);
lsize := dbms_lob.getlength(locator);
dbms_output.put_line('File Length: ' || to_char(lsize));
DBMS_LOB.LOADFROMFILE(cloblocator, locator, lsize);
commit;
end if;
end if;
DBMS_LOB.READ(cloblocator, amount, 1, buffer);
dbms_output.put_line('File ' || buffer);
DBMS_LOB.FILECLOSE(locator);
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Error -- ' || SUBSTR(sqlerrm, 1, 200));
DBMS_LOB.FILECLOSE(locator);

Yes. The column clobcol (in the SELECT in your example) should be set to empty_clob() or already contain a CLOB, before selecting the column value into the local variable. The example in the DBMS_LOB documentation page is misleading as it does not mention this.
Note also that it is best to use dbms_lob.getlength to establish the value for
the amount parameter.
Hope this helps others searching for information on this - I have spent some painful hours working this out!
Peter

APEX on Oracle XE PDF printing produces: Format error: not a PDF or corrupted.

Dear fellow Apexers and Oracle Gurus,
I have the following configuration:
Oracle XE 11gR2
APEX 4.2.3.00.08
Listener 2.0.5
On this setup I can create workspaces and applications as I please.
Now I want to print a PDF report.
I have set up PDF printing to "Oracle Listener" in the "manage Instance" settings in the instance administration.
I have created a classical report on the EMPLOYEES table (Select * from EMPLOYEES)
and enabled PDF printing in the "Printing" area of the "Print Attributes" of the page.
When I run the page I do get the "print" link on the bottom of the page.
Clicking the link does produce a .PDF but showing this file triggers an error in my PDF reader: Format error: not a PDF or corrupted.
Opening the .PDF file in a text editor reveals the corrupt content.
%PDF-1.4
%ª«¬
Unknown function: gatherContextInfo
The same setup works fine and produces the expected PDF file with the report on the following configuration:
Oracle Vbox with Developer days image;
DB 11gR2
Upgraded to apex 4.2.3.00.08
Listener 2.0.5
Since the PDF shows "unknown function" I suspected the XE configuration to lack some of the necessary rights, maybe I forgot to configure the ACLs correctly.
So I compared the ACL info on both configurations. Alas,.. on both machines they return the same result..
SQL> SELECT * FROM DBA_NETWORK_ACLS
HOST         LOWER_PORT    UPPER_PORT    ACL
localhost    null          null           /sys/acls/local-access-users.xml
*            null          null           /sys/acls/power_users.xml
SQL> select * from dba_network_acl_privileges
ACL                                  PRINCIPAL      PRIVILEGE   IS_GRANT    INVERT
/sys/acls/local-access-users.xml     APEX_040200    connect     true        false
/sys/acls/power_users.xml            APEX_040200    connect     true        false
Anyone any idea why this works fine on the Vbox and not on the local XE configuration?
Any hint or answer as to where the problem might be is appreciated
TIA
Wouter

I'm having the same issue. I'm using Oracle XE 11gR2 as well. I've tried with APEX 4.2.2 and APEX 4.2.4. I have set up the Oracle Listener in instance settings and set the report to print and I have the same result as you. Have you had any progress yet?
Thanks
Jason

Numeric Format Error

Similar Messages

Maybe you are looking for