Numeric key pad is not working, card reader is not working

Numeric key pad is not working, card reader is not working,

Did you (or someone else) physically open the laptop case?
If you did, then some cables might have gone loose inside.
If you didn't, for the card reader, check if appropriate device drivers are installed in windows device manager.
for the numeric keypad, first tap once on the NUM LOCK key and check.
If this doesn't solve the problem, boot to "Safe mode", and check.

Similar Messages

In my numeric key pad I can not use the (.) dot because it has a (,) and it is not working in calculations. What I can do?

In my numeric key pad I can not use the decimal dot (.) because it has a (,) and this not work with decimal calculations. What I can do? Help ………

IT NOT WORK IN MEXICO. THANKS A LOT. BEST REGARDS. MANUEL LOPEZ
El 6/2/2015, a las 16:50, Apple Support Communities Updates <[email protected]> escribió:
You received a reply
SGIII has replied to your question. You can view the full discussion in Apple Support Communities.
In my numeric key pad I can not use the (.) dot because it has a (,) and it is not working in calculations. What I can do?
Correct Answer Helpful Answer
Use the buttons above to tell SGIII and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to SGIII, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

Numeric Key Pad is not working. How do I fix this?

FireFox is an excellent browser but I am now unable to use the Numeric Key pad and at times the whole keyboard will not work until I reboot.
Where is it that I would change whatever settings to use the Numeric Key pad.
The Key Pad works fine otherwise.
I assume the keymap has been remapped?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

My USB CF Card reader is not mounting on my 2.5 GHZ Intel Core i5 iMac anymore. It was last week and worked fine to get pictures from my camera. Now it won't mount. I have tried another card reader and the same problem exists. Also tried different cards..

Hi
My USB CF (Compact Flash) Card reader is not mounting on my 2.5 GHZ Intel Core i5 iMac anymore.
Last week it worked fine to get pictures from my camera but now it won't mount at all.
I ejected it in the correct way rather than just disconnecting it but now i cannot get it to remount!
I cannot even see it in the disk utility or system profiler.
I have tried another card reader (a brand new one bought today) and the same problem exists. I've also tried different cards to see if that made a difference and they still arent being picked up on the Mac.
I have done all the usual things like rebooting, unplugging all other USB devices and then trying but nothing has worked.
I'm a photographer and I'm at my wits end here. I know the cards are fine as i have been using them without issue and they are also new.
Note: If I plug the camera in directly to the Mac, the Mac picks it up just fine as it always has done. Its just the card readers that it wont pick up anymore.
If anyone has any ideas at all other than the following (my so called friends advice) you'd earn my undting love:
Buy a PC
Use the camera (Thats why i bought the reader in the first place - importing RAW files from the camera is SLOW!)
Replace your CF cards (I have three 8GB cards two of which i had never used til today and they dont work either!)
Buy a new card reader (this is the 5th one in two days - none work on the Mac)
Many thanks in advance!
LIsa

OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

HELP!!! My Card reader is not working!

My card reader is not working and this is extremely frustrating when trying to transfer data from one device to my my macbook pro. Is there any one out there that can help me with this issue?

Some people (me included) have found the problme to be a stuck contact inside the socket on the MacBook Pro. The far left contact appears to get stuck in the "inserted" position (depressed) and fails to signal to the computer that a new card has been inserted. This contact is partially hidded behind an alignment key molded into the socket. One fix is to carefully (and I mean carefully) use a toothpick to gently prod the contact into its "not-inserted" position (it will pop up and work afterwards). If you aren't comfortable doing this yourself, you can get an inexpensive card reader that connects via USB as a workaround.
If the computer is still under warranty (or you have AppleCare), take it in and let Apple or an AASP fix it for you.

Tecra 9000: SD card reader will not work with XP

I have made some progress with this subject, it seems that Cardbus devices cannot share IRQs, although the main issue is that the memory address FFDFB200-FFDFB3FF is shared by both the SD card controller and the SD Card Memory Device. Unless a way to modify the registry can be found to resolve this memory conflict, the simple answer is that the SD card reader won't work under XP.
I think this would take some major surgery of the registry or re-writing of the drivers to move the memory address used by the SD card device, I am still working on this for now.
Can someone from Toshiba Support or Toshiba Marketing please explain to me why my Tecra T9100 has a sticker with "Designed for Windows XP and Windows 2000" on it, when Toshiba don't fully support XP on the 9000 series?
David
[Edited by: admin]

Hi David
Unfortunately, I dont think that you will find here someone from Toshiba marketing or other departments. This is ONLY a user to user forum.
What you say is simply NOT true.
The Tecra 9000 was delivered with 3 different OS.
It was delivered with Windows XP Pro, W2k and Win98. You can order all this Toshiba images from the Toshiba service partner. Therefore Tecra 9000 does support Windows XP!
Tecra 9100 was delivered with Windows XP and Windows 2000 and supports also Windows XP!
Of course there are different models with different hardware configuration but all supports WinXP.
I dont know why you get this error message or why you cannot use the SD card but I assume you dont use the Toshiba image. Therefore you have installed your OS not correctly. Because youre a newbie you dont know that the whole Toshiba driver installation must be done in the right order and all the Microsoft QFEs must be also installed.
As you see you have to pay attention to many important things if you want to install the OS manually.
Have a nice day

Can anyone recommend a USB CF card reader that will work in my Macbook Pro Retina? My USB card readers for CF cards do not work

At present, the only way I can load photos from a CF card to my new Macbook Pro Retina is by loading them onto an external hard drive via an old PC that can accept either of my USB card readers, then plugging the external hard drive into my MBP. Neither the USB card reader or the cable that comes with the Canon HDSLR camera will transfer photos directly to my MBP. I find it unbelievable that I have to go to a PC to load photos because I can't do it with my new MBP.
Has anyone found a reliable USB CF card reader, or one that connects via thunderbolt or HDMI, at any price, that will work directly with the new MBP Retina?

This is what we need:
Location photoshoot - we use the Canon EOS 5D Mk II still camera & the Canon FX100 pro camcorder.
CF cards are: SanDisk Extreme UDMA & SanDisk Extreme Pro UDMA 6 for video (I think they are both Type II) My Mac recognises them both as FAT 32 format
My MBPRetina is on the latest version of Mountain Lion OSX 10.83
the files from the camcorder will transfer to my MacBook Pro Retina directly via the camera's cable but it is quite slow & it means I cannot continue to film while downloading files but this we can live with.
the files from the still camera Canon EOS 5D Mk II will not transfer directly via the camera's cable - have yet to get the Canon software to download, but via the camera's cable will not help anyway as we need to have the still camera free to keep shooting.
We need to be able to take out the CF card from the first part of the shoot & download the still shots while just on the Macbook's battery power, while we insert a fresh CF card back into the still camera to continue with the next part of the shoot simultaneously (while the first card is downloading.)
The files from the first part of the shoot will be both in RAW (.CR2) & Jpeg format. We just need to quickly transfer the jpegs, then I do a quick sort, batch the best ones as black/white images, & use these in a client slideshow immediately after part 2 of the shoot.
Obviously we need fast data transfer speeds, & rely on the MBP's battery power while on a location shoot.
The card readers I have tried are an older specific CF card reader branded as Palm, & a USB 2 multi card reader branded as Travel Flash. With both readers, the lights on the readers flash on & off, & the MBP recognises the card & the files will even appear both in Finder & in i-Photo, so it starts importing, then aborts with an error message saying:
'The Finder can’t complete the operation because some data in “” can’t be read or written.
(Error code -36)'
& another message saying:
'the disk was not ejected properly'.
So it appears the MBP does read the CF cards but the card readers don't stay connected, no matter what angle I put them on or however many times I re-connect them.
Yes, they are probably cheap & I want to buy a decent one.
So, in summary:
the card reader needs to work when the MBPR is only on battery power (I read in some forums that some USB card readers aren't so reliable on the laptop's battery power)
the card reader needs to be quite fast. I have read the USB 3 readers won't read CF cards at higher than USB 2 speeds. Is this true? Are the firewire connected ones faster, & if so, are they still reliable on the MBP's battery power?
From research, it appears my problem is associated with my specific model of Mac & platform, being MacBook Retina on Mountain Lion OSX Version 10.83. If any of the recommended card readers have been successful with this, plese let me know.
Thanks heaps for the suggestions so far.

Why my numeric key pad on my wired keyboard wont work with snow leopard?

Why my numeric key pad on my wired apple keyboard wont work with snow leopard?
Thanks - Farshad

What do you know, I figured out.
Go to System Preference > Universal Acces> Mouse > check the "Press the option key five times to turn mouse keys on or off.
Thanks

Tun miniport adapters are not working and the camera card reader is not working on a T61P.

The Microsoft tun miniport adapters #4,2, and 3 are not working. They display code 10 error message. Also the USB mass storage device (camera card reader) is not working.
I have tried to uninstall and update the drivers to no avail. I have used ThinkVantage Tool Box. It only lets me know that they are not working. It does say to reinstall them. I have tried. All effort has failed.
All was find until I ran several updates via ThinkVantage.
All suggestions would be appreciated.
Thank you,
Tom

You will not lose data if you back up
Worth doing the basic troubleshooting
Reset
Restore best as new since you have issues ,then you will know if it has started to function correctly ,if not .....
Visit Apple store since if it isn't software probably iPhone is on it's way out

Satellite C850-B635 and Win7 - card reader is not working

My notebook came with windows 8 and the card reader was working
but I installed windows 7 64-bit , downloaded all required drivers to my notebook , but the card reader is not working now .
I downloaded a driver called card reader controller but it didn't work as well
I don't know if there is a problem or there is a driver that I should install and I don't know .
please help me solving that problem .
In my windows device manager these devices isn't recognized :
*PCI simple communications controller
*SM Bus Controller
*Unknown Device
I tried to search in my drivers download page in Toshiba website but couldn't find these
please help me making my card reader working again.
Regards
Message was edited by: domaking

To me the case is simple and the reason why the SD card reader does not work is that an compatible driver isnt installed.
My theory seems to be correct since the SM bus controller and PCI simple communications controller appear in the device manager and I guess one of these devices belongs to the SD card reader/controller.
I think you should simply install this Realtek Card Reader Controller which I found on the Toshiba EU driver page
http://support1.toshiba-tro.de/tedd-files2/0/carc-20130924161048.zip
Furthermore you should install all other Win 7 drivers as well as Toshiba tools available for Satellite C850 series.
Very important is the chipset driver, USB 3.0 driver (Win 7 needs this driver to control the USB 3.0 port), display driver. etc
Not very essential tools are Bulletin Board, Online Product information, Reeltime, etc such additional tools dont improved the notebook performance so its up to you if you want to use these software parts

Since I installed lion, my SxS Card reader is not working any more. Some advise?

since I installed lion, my SxS Card reader is not working any more. Some advise?

Try resetting the PRAM https://support.apple.com/kb/HT1379

Installed Photoshop Elements. Card Reader still not working.

Installed Photoshop Elements. Card Reader still not Working.

And what does any of that have to do with Adobe software? You better check your hardware setup and install the proper driver for whatever card reader you use...
Mylenium

SD card reader is not working in my MBP early 2011. Is there any solution?

SD card reader is not working in my MBP early 2011. Is there any solution?

on my macbook iphoto didn't recognise my camera or card reader after upgrading to iphoto '11,
Evenutally I went to an application called Image Capture which I seem to have already. This read the camera contents. I selected the images I wanted and then imported them into iphoto which was one of the options given. It worked. God knows why one has to go through two steps. But I'm feeling pretty triumphant. This may help you if you haven't already sorted it.

Satellite X200 and Windows7 (32bit) - Card Reader is not working

Hi All,
Hope someone can help.
My X200-219 has recently been upgraded to Windows7 and although it is running well, (better than with Vista for now anyway), the card reader is not working.
Do I need a driver installed??
Looked at various but can't find anything obvious??
Cheers and thanks
DB

Hi
Try please to install THIS driver .
It is Vista 32 bit driver for Digital Media Card Reader. I hope it will work.
Send some feedback.

SD photo card reader is not working; not recognized by PC (HP Envy 700-414) running Windows 8.1

My SD photo card reader suddenly stopped working - I get an error message to the effect that USB device not recognized. How do I get this working again?

Hello @mnskier,
I understand that your SD Card Reader has stopped working. I think you should do a backup and recovery of your computer to ensure that you do not have a hardware issue. The best way to do that is to replace the software so you have ruled out settings or a bad driver as possible causes. To backup your personal information and ensure that it is not lost I would like you to review and follow the steps set out in the HP Support document: Backing Up Your Files (Windows 8), which will ensure your personal files are up to date.
***WARNING!! If you want to keep any emails or bookmarks/favorites you will want to back those up as well as I do not believe they are backed up in the HP Backup process.
Next, I would like you to review and follow the steps set out in the HP Support document: Performing an HP System Recovery (Windows 8), which will you through recovering your computer back to factory settings.
*** IMPORTANT - Your personal files such as libraries, personalization settings, user accounts, and desktop themes are permanently removed. As well the computer settings are returned to the defaults (the way it was when it came from the factory). All apps and software that were installed on the computer when it came from the factory are reinstalled, and their settings are reset to the defaults. Additionally, software, apps, programs, and everything that you have installed or saved on the computer are permanently removed.
If the above steps did not resolve your issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Numeric key pad is not working, card reader is not working

Similar Messages

Maybe you are looking for