Numeric Keypad does not enter data into Excel
Is there a way to turn on/off the numeric keypad for the imac intel based apple computer when using Microsoft Excel?
I want to enter numeric data into the cells of a spreadsheet in the Excel program, but I can not figure out how to get the numeric keypad to work to do this. It will only work as a directional keypad, moving the active cell left or right, or shoot to the end of the spreadsheet. Consequently I forced to use the use the row of numbers above the keyboard (which is also the row of numbers below the function keys) to enter data.
Strangely, the numeric keypad will enter data with other programs, such as Word or when entering data into an online page.
I have searched Apple help without success.
Make sure that NumLock has not been engaged. To toggle that on and off, press Shift-Clear ("Clear" is the key immediately above the 7 on the keypad).
Similar Messages
-
Number 2 key on numeric keypad does not work. All other keys work properly.
The number 2 on the numeric keypad does not work. Is there some way to clean it? If not how do I go about ordering another keyboard?
inside the remote there is a micro switch for each direction each can break
so yeah you could be the first who write about the right arrow key microswitch being broke in your atv -
LR 2.6 Numeric Keypad + Does not work
Windows XP sp3 -- I have searched and noted others have this problem, but have not been able to find a solution or workaround.
How can I get my numeric keypad + sign to work with LR (as it does with CSR 4)?
Thanks
MikeThank you sooo much for this answer. I use an iMac G5, but still, had apparently done the same thing. It was so nice to find this solution and be able to fix it.
-
G550's numeric keypad does not work as it should be
Goodnight everyone, recently bought a laptop lenovo G550. He has a numeric keypad and one thing is making me confused. The key should be a dot "." is actually a comma ","..... what should I do? I tried everything ... My current setup is Portuguese Brazil ABNT 2
Please Help-me
Stevan Cseke
Brazil
Note from Moderator: Private information removed for your protection.try this : http://windows.microsoft.com/en-US/windows-vista/Change-your-keyboard-layout
-
Entering Data into Excel with Applescript
I am looking to populate various worksheets in a single Excel file (Workbook?) with data that I enter via a dialog box in an Applescript. I'm a newbie and can't quite figure out the Applescript syntax of how to actually get data to be entered into an Excel cell.
danI only have 2004 to test on at the moment, and I can't see your whole worksheet, but:
I made a file Workbook1.xls on my desktop and made the second worksheet name "Room 218".
Entering "H,218" works OK with this script, so I suspect there's something odd about the two extra "activates" that you have in your code, unless it is to do with 2008.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;">
set a to text returned of (display dialog "Please enter the slot (A-H) and the room #, separating them with a comma:" default answer "")
set astid to AppleScript's text item delimiters
set AppleScript's text item delimiters to ","
set AppleScript's text item delimiters to astid
set {chosenslot, chosenroom} to {(a's text item 1), (a's text item 2)}
tell application "Microsoft Excel"
activate
open workbook workbook file name ((path to desktop as text) & "Workbook1.xls")
set worksheetname to "Room " & chosenroom
activate object worksheet worksheetname
set formula of range "J3" of worksheet worksheetname to chosenslot
end tell </pre>
Incidentally, all those commas in the formatted script threw me, and it happened to me as well.
Insert this line at the top of the forum formatting script to be safe:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;">
set AppleScript's text item delimiters to " "
</pre> -
Is there a way to enter data into a numbers cell on the screen directly, no keypad?
Is there a way to enter data into a numbers cell on the screen directly, no keypad?
Using a stylus or finger?No. You have to use the built-in keyboard or a bluetooth connected external keyboard.
Cheers, Tom -
0EC_PCA_3 does not return data in RSA3 if the target system is entered
Hello all,
Datasource 0EC_PCA_3 is not transferring data to the BW 7.0 system. In the ECC 6.0 system datasource 0EC_PCA_3 does not return data in RSA3 if the target system (BWDCLNT100) is entered in the selection fields. When omitting the target system all expected data is returned.
Datasource 0EC_PCA_1 works fine for the same target system.
There is one thread dealing with the same problem but the person does not provide the solution he found.
Does anyone know what the issue is?
Regards and thanks,
József.The problem was solved by removing the datasource in both BW and R/3 and activating everything from scratch again. We didn't find out what was the cause of the problem, but at least it is working now.
-
Error while exporting data into Excel Sheet
Hi All,
I have created a VO which is based on Query(Not based on EO) and the Query is as follows:
select f.user_name ,
f.description ,
a.currency_code,
a.amount_to ,
a.amount_from
from seacds.ar_approval_user_limits_nv a , seacds.fnd_user_nv f
where f.user_id = a.user_id
and a.document_type = 'CM'
order by 2;
Based on this VO I have created a search page which will search and returns data from the table and finally standard export button will export the data into excel sheet.
In this am searching the data based on above 5 attributes. Without entering anything in the messageTextInput if i am clicking GO button, it is returning all the data into the table region. After this if i click on Export Button, data are getting exported into Excel Sheet. It is fine.
But if i am searching the data by entering any value in any of the messageTextInput, it is returning data. But if i am clicking the Export Button then it is throwing the following error:
Exception Details.
oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT * FROM (select f.user_name ,
f.description ,
a.currency_code,
a.amount_to ,
a.amount_from
from seacds.ar_approval_user_limits_nv a , seacds.fnd_user_nv f
where f.user_id = a.user_id
and a.document_type = 'CM'
order by 2) QRSLT WHERE (( UPPER(CURRENCY_CODE) like UPPER(:1) AND (CURRENCY_CODE like :2 OR CURRENCY_CODE like :3 OR CURRENCY_CODE like :4 OR CURRENCY_CODE like :5))) ORDER BY DESCRIPTION asc
at oracle.apps.fnd.framework.OAException.wrapperException(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
at OA.jspService(_OA.java:71)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
## Detail 0 ##
java.sql.SQLException: Invalid column type
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:175)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:240)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectCritical(OraclePreparedStatement.java:7895)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:7572)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:8183)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectAtName(OraclePreparedStatement.java:8206)
Kindly give me any idea to clear this error.
Thanks and Regards,
MyvizhiHi Myvizhi ,
Did you try running the query from back end that got generated in the error trace ? see if that query is returning desired
output .
Also would like to know if you are using oracle standard search mode i.e result based search / auto customization search ?
--Keerthi -
How to downlaod vednor master data into excel sheet in SAP Application serv
Hi friends
I want to download SAP vendor master data into excel sheet and the file should be stored in SAP Application server Location with padding zeros.
Please help me.
ThanksHi Ramesh,
It is not possible to download data in Excel file on application server. You can better download the same in tab separated text file and then convert that text file to XLS.
Please do not open multiple threads for same problem.
Regards,
Atish -
How to downlaod vednor master data into excel sheet in SAP Application ser
Hi friends
I want to download SAP vendor master data into excel sheet and the file should be stored in SAP Application server Location with padding zeros.
Please help me.
ThanksHi Ramesh,
You can download the data into application server using the following code. You will have the vendor details in the internal table. Then you will open a file and transfer the data as follows.
* Download internal table to Application server file(Unix)
DATA: e_file like rlgrap-filename value '/usr/sap/tmp/file.txt'.
open dataset e_file for output in text mode.
lOOP AT it_datatab......
transfer it_datatab to e_file.
ENDLOOP.
close dataset e_file.
In application server you will have only files and not excel sheets.
Reward points if useful,
Aleem. -
Some problem of download BSP data into excel using cl_bsp_utility= download
Hello Experts,
I have read the blog of thomas.jung for download bsp data into excel, and it's working correct, and after some try and error, now I can download the excel with multi sheets.It's all cool except one thing.....when I add a button on the standard screen of the supplier qualification of the slc to download the excel file, after the popinp up screen, the standard screen can't do any operation at all......there are no any error message and the downloaded file is all correct .
Does any one know what can I do?any ideas?
By the way, after some research, maybe the issue was caused by the setup of the button, but I don't know how to fix it...0rz
the standard code for buttton is
lv_id = mv_id && '>display'.
lo_edit_display_button = cl_thtmlb_button=>factory( id = lv_id
text = lv_button_text
tooltip = lv_button_text
enabled = 'TRUE'
onclick = lv_button_action ).
WHILE io_page_context->element_process( element = lo_edit_display_button ) = if_bsp_element=>co_element_continue.
ENDWHILE.
so I copy it and modify like this:
lv_id = mv_id && '>download'.
lo_download_excel_button = cl_thtmlb_button=>factory( id = lv_id
text = w_text
tooltip = w_text
enabled = 'TRUE'
onclick = /srmsm/if_ql_ext_ui_c=>ZC_ACTION_DOWNLOAD_EXCEL
WHILE io_page_context->element_process( element = lo_download_excel_button ) = if_bsp_element=>co_element_continue.
ENDWHILE. -
PMI Problem (End-to-End Monitor does not show data)
(End-to-End Monitor does not show data)
As I know that XML Messages Alerts T-code: SXMB_NOMI shows all alerts including errors as well I put date Range: 01-01-2008 to 01-08-2008 and filters for "Errors" system does show more then 300 errors
But problem in RWB - End-to-End Monitoring, when I click on display and date range 01-01-2008 to 01-08-2008 its give me graphical overview in right of window
and shows summary:
Errors: 0 Average
Open 904 Maximum
Successfully Completed 0 Minimum
Overall: 904
I thing End-to-End Monitor doesn't get data from PMI...
why does't show any errors, which is shows in SXMB_MONI
Please tell me how to resolve that problem
Thanks in Advanced
Edited by: issue2008 issue on Aug 26, 2008 12:02 PMHi,
A destination pointing to the Integration Server is created on the J2EE engine to collect the data for the end-to-end monitoring. If this destination is incorrect or if there are several clients in the system of the integration server, the data may be sent to the incorrect client.
This might be a reason so you can implement the correction of the destination in a manual way as follows:
Open the J2EE visual administrator.
Select the Destination service.
Select the HTTP "pmistore" destination.
Enter the URL for the ICF service spi_gate of the Integration Server in the following form "http://<host>:<port>/sap/bc/spi_gate?sap-client=<xxx>", where 'host' denotes the host of the integration server, 'port' denotes the HTTP port, and xxx is the client of the Integration Server.
Thanks,
Hemant -
Back ground job to download data into excel in the given path on sel-screen
Hi Friends,
I have 2 radion buttons on the selection screen 1. Online 2. Back ground.
If i select the back ground radion button all program should run in back ground only, and finally the data should be downloaded to excel file on the given path in selection screen.
Does any one have code for this.
Thanks in advance
Ajay
Edited by: Ajay kumar on Aug 30, 2010 11:03 AMHi Ajay,
try this way..
If sy-batch = 'X' . "background Job
* Submit report in background and creating spool
SUBMIT (w_rname) USING SELECTION-SET p_var
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS wa_pri_params AND RETURN.
COMMIT WORK AND WAIT.
* To fetch the spool number from TSP01 table
IF sy-subrc EQ 0.
SELECT rqident
FROM tsp01
INTO p_spool
* UP TO 1 ROWS
WHERE rq2name = wa_pri_params-plist.
ENDSELECT.
ENDIF.
ENDIF.
* Fetching Spool data into internal table
CALL FUNCTION 'RSPO_RETURN_ABAP_SPOOLJOB'
EXPORTING
rqident = p_spool
TABLES
buffer = t_Excel_data.
"Now format the Data into excel format or Comma seperated format and download to Appl server.
Prabhudas -
Viewset does not have data passed from GenIL
Hi All,
We have a custom component in which data is not getting passed from a ViewSet to the Overview page. The details of the issue are given below:
There is a detail view zsoEF and a table view zsoChild. These 2 views are housed in a viewset zsoVS. This view set has an event Eh_OnBack which requires the data from views zsoEF and zsoChild to be passed to overview view zsoOV.
We recently upgraded to CRM 7.0. After the upgrade, the values entered on the views zsoEF and zsoChild are processed in the ZGenIL. The context nodes and the custom controllers are filled correctly with the screen values and some auto added data based on validations..
When we click on the Back button, then Eh_OnBack does not have data in the Custom Controller. I am not able to pin point the reason for this missing data in the Back event. From the way i understand, when we do data binding in the views, we don't have to do that in ViewSet. Has there been any change in this design in CRM 7.0?
I would like to know if there is any workaround for this issue.
Thanks,
RiniHi Rini,
Did you try to bind the context nodes with the component controller. Can give it a try whether it resolves the problem. Any way it is difficult to say anything as we don't have an idea what exactly you did in the component. Lets take it forward. In the mean time have a look in the below link.
History navigation and context initialization calls - CRM - SCN Wiki
Thanks,
Javed. -
User defined fields does not get added into database
Hello Experts
User defined fields does not get added into database , when i click add button it
shows data added sucessfully , but when i check data base no entry is made , only entry is made for
B1 fields , like DocEntry ,DocNum etc.., no entry is made for U_fields..
I have check every thing databound is also set to true
Actually first few 6 data was added properly but now its not geeting added for user fields
I have used 2 document row child table for 2 matrix and for remaining Document table
What might be the problem
reply soon
plz suggestHello sir
I have checked Default form , in that entry is made into database
but running the form in screen painter in preview mode or through coding it does not get added for user field
this id my binding code
LoadFromXML("updateopd.srf")
oForm = SBO_Application.Forms.Item("updopd")
oForm.DataBrowser.BrowseBy = "txtpatid"
'Adding combo in Obervation
oItem = oForm.Items.Item("txtpatid")
oEdit2 = oItem.Specific()
oEdit2.DataBind.SetBound(True, "@UPDATE", "U_PID")
oItem = oForm.Items.Item("txtmnane")
oEdit3 = oItem.Specific()
oEdit3.DataBind.SetBound(True, "@UPDATE", "U_FName")
oItem = oForm.Items.Item("txtlname")
oEdit3 = oItem.Specific()
oEdit3.DataBind.SetBound(True, "@UPDATE", "U_LName")
Plz suggest
Maybe you are looking for
-
Reverting back to itunes 6.0.5 wont work
when i tried to reinstall itunes 6.0.5 beacause of the trouble with version 7, there is no file that says previous itunes libraries. what's goin on?
-
Fiori - Bind oData to SAPUI5 - Table
Dear All Gurus, Need your expert knowledge on solving below simple matter.. I have created an oData(for customized app - Purchase Order Header and Line Items for MIGO transaction) and I am getting data successfully from oData but I am bit stuck in ho
-
Question regarding having two keyfigures in one line
Hello I have a requirement. I need values of two keyfigures from one cube in one row in the BEX Report. Basically depending on the month i want 6 months of history keyfigure value and 12 months of forecast keyfigure value in BEX reporting in one row
-
Hi, I want to use log4net in a dll project. I haven't yet found a good reference for doing so. Does anyone know where to find such a reference? Bill Bill Swartz
-
My phone can't start.... Help me plz
Hello, Can you help me stock rom for HP Slate 6 voicetab? I can't download on your website. My phone can't start, it can start at logo HP. I really need it. Thank you so much! Help me..... Please....