Numeric keypad quit working and does not connect to the bluetooth

my wireless bluetooth numeric keypad is not connecting

Hello Gneel01,
I found an article with steps you can take when you have issues with a Bluetooth device not connecting. I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
Bluetooth Quick Assist
http://support.apple.com/kb/ht1153
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

Did you already try to reset the iPod by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data.
If this does not work, try to reset the network settings in Settings/General/Reset. After that you'll have to put in the passwords for all known networks again.
More troubleshooting can be found here:
iOS: Troubleshooting Wi-Fi networks and connections

Hello my iPhone 4 does not connect to the internet anymore(wlan still works) but it still shows the 3G symbol. I have that problem since ios 5.1

Ich still shows the 3G symbol but I cant connect to the internet anymore. Since ios 5.1 it disconnected every 30 minutes untill i restarted. De- and reactivating the mobile internet never helped. Now i dont get a connection. It quite not works.
I never had problems untill ios 5.1
of course apn, username and passwort for the carrier are correct.
My carrier is simyo
(im in germany)
Thank you for helping me

Hi Damien,
Thanks for your reply.
I had not created 2 separated wireless network. The airport extreme has had create wireless allowing it to be extended and the airport express has had it to extend since day 1.
The only device that does not connect to the airport express when it is far from the airport extreme here is the iPhone 4. I've tested 2 Windows based computers, 2 Macs, 1 Samsung TV and 1 Android phone and they all are able to connect to the airport express when the signal from the airport extreme is weak (please take a look on the screen shots on the original post).
The screenshots of the 2 devices' wireless set up can be found below:
Airport Extreme
Airport Express
I have seen other people here on the Apple discussions complaining about the same issue with their iPhone 4 and iPad: would it be a iOs problem?
Regards
Gilson

Trying to setup TC to the internet (Comcast modem) and does not connect.

I'm replacing my old Netgear WiFi router with the TC. The provider is Comcast via their modem but, after setting up TC it does not connect to the internet. Of course Comcast service doesn't answer. I've tried the usual, unplugging the modem and TC and reconnecting, then resetting, etc, no connection to the internet. Do I need to directly bypass the WiFi router to start and connect the computer first and capture the DNS settings? Comcast usually does that automatically. After that connect TC to the modem and then manually edit settings? What settings use I edit?

Is the comcast modem a pure modem or also a router?
If it is a pure modem.. the TC must be in router mode.
If it has been used in another setup or is just being difficult .. reset the TC to factory and start over.
It is simply in DCHP and NAT for network setup.. it should get an IP and share it by default.
Normally you need to turn off the modem for several minutes to make the ISP gateway give up the MAC address of last connected item.
Tell us the exact model of the modem if the above doesn't work.
Is the TC new one?

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
Customized Progress Indicator - Captivate blog
If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes

Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes to do a restore. I have tried to do a reset using the sleep button and home key and all I get is a white band across the screen and then it boots into the main system but it is just a series of white lines going across the screen, how can I do a restore on this?

Hey dbwithers,
Thanks for the question. I understand that you are experiencing issues with your iPad after attempting to update to iOS 8. To isolate these issues, let’s try placing your iPad in recovery mode and attempting a restore with iTunes:
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

TS1410 My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

Hello Jane Benstock,
Thank you for using Apple Support Communities
It sounds like the next best step to take would be to reset the iPod Shuffle.
Check out this article named Resetting iPod shuffle found here http://support.apple.com/kb/HT1655.
All the best,
Sterling

Problems to shut down, restart my Mac it displays a message saying Safari does not allow it. I try to quit Safari and does not do it.

Problems to shut down, restart my Mac it displays a message saying Safari does not allow it. I try to quit Safari and does not do it.

Have you tried using Activity Monitor to shut down Safari?
Ciao.
Have you clicked on the Safari icon in the dock and seen if 'Force Quit' is displayed?
Message was edited by: OGELTHORPE

My bluetooth just keeps searching on my new iPhone 5s and does not recognise my car bluetooth which was working perfectly with my 4s.

My bluetooth just keeps searching on my new iPhone 5s and does not recognise my car bluetooth which was working perfectly with my 4s.

Maybe it's because of Mfi approving (https://developer.apple.com/programs/mfi/)
I have Sony bt GPS but can't use it with my wifi iPad because it's not approved.

The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In atte

My home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.

Maybe not too late to help you.
For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
HTH.

After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server.

After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server. I have already tried the resetting with power swich and home button and plugging into computer but it says the "iPhone software update server cannot be contacted." I am locked out of my phone. Does anyone have any idea how to resolve this issue and get the phone working again. I will add that I am now trying to restore it on a different computer with a lower version of itunes, but the computer that it initially happened on had the updated itunes and gave me the same result ... nothing. Thanks for your help in advance.

Try going to recovery mode as described here. You may have to try this more than once to succeed.
Use the original iTunes that the iPhone synced with.
http://support.apple.com/kb/HT1808

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

The work book does not exist in the document store

Hi Forum,
Has anyone come accross this error "The work book does not exist in the document store" I just changed the description of my Work book in Development and saved. Now it wont open. The error message is "The work book does not exist in the document store". I already have this work book in Q. So I cannot create another one with a different tech. name. Someone please help

Youcan no longer display a workbook. You receive an error message when opening: <Internal error>: 1201 document storage
Cause and prerequisites
In very rare cases, when you store a workbook, you might not be able to open it again.
Solution
Function module BDS_PHIOS_GET_RIGHT has to be changed so that the last available version of the Workbooks can be displayed.

How can i setup pages to automatically open when double clicked. Currently when I double click it creates cpgz file and does not open. The only way to open pages doc is to manually ask to open with pages.

Currently when I double click it creates cpgz file and does not open. The only way to open pages doc is to manually ask to open with pages.

Hi Karen,
Sounds like OS X has lost the association between Pages and its files.
Start by quitting Pages, then going to Finder.
In Finder, locate a .pages file. Click on it (once), then press command-I (eye, not one) to Get Info.
In the Info window that opens, expand the Open With section.
In this section, click on the pop-up menu and choose Pages (even if Pages is already shown).
Click the Change All button to associate all files with the .pages extension with Pages.
Close the info window.
Double click any .pages file to check that Pages will now launch and open the file.
Regards,
Barry

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace choose File New Photomerge. However the Photomerge does not work, it does not respond. The only thing I can come u

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.

The blog was incorrect. Photomerge should work in the trial, too.
When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor:

Numeric keypad quit working and does not connect to the bluetooth

Similar Messages

Maybe you are looking for