Numeric Pointer not available

Dear all,
I am trying to configure my generic data source for delta update through a numeric pointer but there's only timestamp and calendar day available.
Anybody out there who knows this case?
Many thanks in advance.
Regards
Tobias

A numeric data pointer is a field in your table that contains sequential numbers. The pointer works by noting down the last pointer value transferred. The next delta takes the values appended to the table since the last pointer value.
If you have timestamp and/or date field, that would be better because the are already there (you don't have to change the table). If you have a timestamp field (not a time field but a time and date field), then I would use that since it is the most accurate.
Brian

Similar Messages

Show focus points not available

My pictures used to all have the option of showing the focus points in Aperture. I would click on the icon for focus points to toggle it on and off.
Starting last year the icon for the focus points is not even there under the Info tab (same camera and lenses). i just received a new camera body but same lenses.
Pictures still do not have the icon for Focus Points. Going to the menu and choosing "show focus points" does no good because the icon is not there (but the icon for jpeg/raw, metering, and wb are there). if i go to some old pictures the icon is there for the old pictures.
i re-downloaded the program, trashed the preference files, etc.
Camera- Canon 40D, Canon 7D mii. Lenses CAnon 17-55 f/2.8 and Canon 70-200 f/4, non IS.
Any help would be appreciated.
Terry

I just checked one of my photos in Aperture for you..... it is the only reason I've kept aperture to be honest! Mine still works on my raw photo which is from a 5dmiii. I'm in the process tho of moving all my photos to external hard drives and only keeping current photos on laptop due to storage issues. I'm also switching to Bridge, ACR and PSCC. But when I open projects from Aperture off of hard drive I get a message that says I need to upgrade library and opens in Aperture. I don't want to be bound to Aperture anymore. What if I don't have Aperture on next Mac? So not how do I get my photos unhostaged? Sorry about rant.... just very frustrated if I have to go through some long drawn out process to get this straightened out.

Sapmnt mount point not available

Hi All
Need some quick inputs .
We haev a distributed environment where SAP is on Windows 2003 and Database is on Linux.
After changing ip on both the systems ..Windows server came up fine but in Linux Db sapmnt mount point was not fine.
While accessing sapmnt it was showing ?? ?? in place of fiel ermission user group.
Unfortunately we have no backup of sapmnt in Linux..
I guess sapmnt is the source and ther are soft link to usr/sap/SID
Can anybody let me knwo how to proceed here.
Strangely system were running fine when i started SAP.
Reagrds
Ajay

HI All,
Not sure about samba ,actually DNS is not configured here.
Now i am facing a strange issue.Copied files exe from similar server with same application and kernel.copied the global and profile directory from Windows system to the Linux DB server.
But SAP didn't started with this.
Reverted the changes, system are all running except Java and Pi system.
Here is the log for PI
dev_ms
[Thr 11604] Sun Jul 04 23:41:30 2010
[Thr 11604] ms/http_max_clients = 500 -> 500
[Thr 11604] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid   562 (PC with Windows NT)
relno      7110
patchlevel 0
patchno    37
intno      20020600
make       multithreaded, Unicode, 64 bit, optimized
pid        13540
[Thr 11604] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 13540) [msxxserv.c   2174]
[Thr 11604] ***LOG Q0I=> NiIBindSocket: bind (10013: WSAEACCES: Permission denied) [nixxi.cpp 3587]
[Thr 11604] *** ERROR => NiIBindSocket: SiBind failed for hdl 25/sock 1536
    (SI_EPORT_INUSE/10013; I4; ST; 0.0.0.0:3907) [nixxi.cpp    3587]
[Thr 11604] *** ERROR => MsSCommInit: NiBufListen(3907) (rc=NIESERV_USED) [msxxserv.c   11627]
[Thr 11604] *** ERROR => MsSInit: MsSCommInit (internal) [msxxserv.c   2233]
[Thr 11604] *** ERROR => MsSInit failed, see dev_ms for details
[msxxserv.c   7114]
[Thr 11604] ***LOG Q02=> MsSHalt, MSStop (Msg Server 13540) [msxxserv.c   7173]
=============
dev_disp
sysno      07
sid        DP1
systemid   562 (PC with Windows NT)
relno      7110
patchlevel 0
patchno    44
intno      20020600
make       multithreaded, Unicode, 64 bit, optimized
profile    G:\usr\sap\DP1\SYS\profile\DP1_DVEBMGS07_Mngnetmcdev
pid        11636
Sun Jul 04 23:41:31 2010
kernel runs with dp version 117000(ext=117000) (@(#) DPLIB-INT-VERSION-117000-UC)
length of sys_adm_ext is 584 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (07 11636) [dpxxdisp.c   1248]
     shared lib "dw_xml.dll" version 44 successfully loaded
     shared lib "dw_xtc.dll" version 44 successfully loaded
     shared lib "dw_stl.dll" version 44 successfully loaded
     shared lib "dw_gui.dll" version 44 successfully loaded
     shared lib "dw_mdm.dll" version 44 successfully loaded
     shared lib "dw_rndrt.dll" version 44 successfully loaded
     shared lib "dw_abp.dll" version 44 successfully loaded
     shared lib "dw_sym.dll" version 44 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3907
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Sun Jul 04 23:41:43 2010
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0134.qqq.nxst) took 12 seconds
Sun Jul 04 23:42:00 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6385]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >Hostname_DP1_07                      <
DpShMCreate: sizeof(wp_adm)          42864     (2256)
DpShMCreate: sizeof(tm_adm)          5796848     (28840)
DpShMCreate: sizeof(wp_ca_adm)          64000     (64)
DpShMCreate: sizeof(appc_ca_adm)     64000     (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
DpShMCreate: sizeof(comm_adm)          584080     (1144)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
DpShMCreate: sizeof(slock_adm)          156064     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=3800/16/364864/364880
DpShMCreate: sizeof(file_adm)          364880     (80)
DpShMCreate: sizeof(vmc_adm)          40896     (2152)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: sizeof(j2ee_adm)     3936
DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000AB30050, size: 7210208)
DpShMCreate: allocated sys_adm at 000000000AB30060
DpShMCreate: allocated wp_adm_list at 000000000AB330C0
DpShMCreate: allocated wp_adm at 000000000AB332B0
DpShMCreate: allocated tm_adm_list at 000000000AB3DA30
DpShMCreate: allocated tm_adm at 000000000AB3DA80
DpShMCreate: allocated wp_ca_adm at 000000000B0C4E80
DpShMCreate: allocated appc_ca_adm at 000000000B0D4890
DpShMCreate: allocated comm_adm at 000000000B0E42A0
DpShMCreate: allocated slock_adm at 000000000B172C40
DpShMCreate: allocated file_adm at 000000000B198DF0
DpShMCreate: allocated vmc_adm_list at 000000000B1F1F50
DpShMCreate: allocated vmc_adm at 000000000B1F2000
DpShMCreate: allocated gw_adm at 000000000B1FBFD0
DpShMCreate: allocated j2ee_adm at 000000000B1FC010
DpShMCreate: allocated ca_info at 000000000B1FCF80
DpShMCreate: allocated wall_adm at 000000000B1FCFA0
DpCommAttachTable: attached comm table (header=000000000B0E42A0/ft=000000000B0E42B0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (10 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpFileInitTable: init table for 3800 entries
DpSesCreateTable: created session table at 000000000F6A0050 (len=161328)
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> off
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 32762MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 32764MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 8190 blocks reserved for free list.
ES initialized.
DpVmcSetActive: set vmc state DP_VMC_ENABLED
DpVmcSetActive: set vmc state DP_VMC_ACTIVE
DpVmcInit2: o.k.
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
J2EE server info
start = TRUE
state = STARTED
pid = 7736
argv[0] = G:\usr\sap\DP1\DVEBMGS07\exe\jstart.EXE
argv[1] = G:\usr\sap\DP1\DVEBMGS07\exe\jstart.EXE
argv[2] = pf=G:\usr\sap\DP1\SYS\profile\DP1_DVEBMGS07_Hostname
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64997
argv[5] = -DSAPSYSTEM=07
argv[6] = -DSAPSYSTEMNAME=DP1
argv[7] = -DSAPMYNAME=Hostname_DP1_07
argv[8] = -DSAPPROFILE=G:\usr\sap\DP1\SYS\profile\DP1_DVEBMGS07_Hostname
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c   1635]
***LOG Q1K=> MsIAttachEx: StoC check failed, Kernel not compatible with system (rc=5) [msxxi.c      814]
ERROR => not allowed to connect to message server via port 3907 [dpxxdisp.c   12156]
ERROR => Please check your configuration (profile parameter rdisp/msserv_internal) [dpxxdisp.c   12157]
DpHalt: shutdown server >Hostname_DP1_07                      < (normal)
DpIJ2eeShutdown: send SIGQUIT to SAP J2EE startup framework (pid=7736)
ERROR => DpProcKill: kill failed [dpntdisp.c   408]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
DpHalt: stop work processes
Sun Jul 04 23:42:06 2010
DpHalt: stop gateway
DpHalt: stop icman
DpHalt: terminate gui connections
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
DpHalt: waiting for termination of gateway ...
Sun Jul 04 23:42:07 2010
ERROR => [DpProcDied] Process died (PID:17280 HANDLE:1112 rc:0x0) [dpnttool2.c 147]
DpHalt: wait for end of icman
DpHalt: waiting for termination of icman ...

I am extremely upset. I purchased my iPad in SA and I am traveling in Greece. When I want to make use of the free apps, I get a message that the app is not available in the SA store. What is the point of having an iPad if you cannot use it worldwide?

I am extremely upset. I purchased my iPad in SA and now I am in Greece. I cannot download free apps as I get a message that the apps are not available in the SA store and only in US stores. When I change to the US store the same thing happens. What is the point of having an iPad if I cannot use it worldwide??? I feel that I wasted my money purchasing it as I specifically purchased it to use when I travel. How can I get access to all the available apps and why are they restricted.

You can use your iPad worldwide. However, each AppleID is tied to
a specific country's store. To use the AppStore in any country, you
must be in that country and have a credit/debit card issued by a financial
institution in that country with a verified billing address in that country.
It is the developer's choice which AppStores he makes his app available
from, and some countries prohibit certain apps.
To make a purchase from the US store (including downloading a free app
available in the US store), you must be in the US and have card issued
in the US with verified billing address in the US.
You can use your purchases from the SA store worldwide, but you
cannot make purchases in other than the SA store unless you meet
the aforesaid conditions.

DPM 2012 R2 All backups fail with recovery point volume not available after resizing OS disk

I resized the C drive partition of my DPM server (the data is on a separate dedicated array) and everything failed. I put it back but everything is still failing with the same problem as here:
DPM 2007: The recovery point volume is not available?
I've run chkdsk for a couple and both have given the following after doing 3 stages:
Windows has scanned the file system and found no problems.
No further action is required.
The backups still fail and the only error information I can find in the event logs is:
Backup job for datasource: Online\<VM name> on production server: <host FQDN> failed.
How can I find out what the problem actually is?
Is it possible to resize the C drive containing a DPM install? If so what can it be safely resized to? It easily met the minimum requirements and I don't know of anything in the documentation that says resizing the OS disk may cause issues.
Preparing your environment for System Center 2012 R2 Data Protection Manager (DPM)

Hi,
Resizing the boot partition (usually C:) should not effect DPM in any way. DPM writes directly to it's volumes contained in the storage pool and not through the mount points on the C: drive. So is the DPM UI showing
missing volume next to some data sources ? Try doing a DPM disk rescan and see if that removes the missing volume flag.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Log-Point Statement not available

Hi,
We are on a ECC500 system with SAP_BASIS SAPKB64020. I have noticed that the TCODE SAAB maintaning Checkpoint Groups is available, The activation of Log-Point is also available i TCODE SAAB.
But when write the ABAP statement:
LOG-POINT ...
The abap parser says that it does not know this statement.
Any idea why is so? Is this not available on SAP_BASIS 640, or are we missing some SP's on SAP_BASIS.
Best regards,
Martin

Yes. Migrate the image to which you wish to apply these two adjustments to the 2.0 RAW converter. Mind that your colours may shift; possibly the best way to do this is to remove all adjustments first; this will also cause the image to be interpreted by the 2.0 RAW converter.
Cheers,
k.

I updated to Yosemite. iPhoto says I need to update to the latest version. The app store says the version I need is not available in the US. Thus iPhoto won't work or even open at this point

I updated to the yosemite system. My iPhoto says I need to update to the latest version for it to work with yosemite. The app store searches and then states the version I need is not available in the US. Currently I cannot use iPhoto. Suggestions?

Csound1,
Thanks for the hint about not emptying the trash. I will try to work on this tonight or tomorrow morning and let you know if "this helped me".
Russell,
If you go into the iLife support forum for iPhoto, there are a couple good threads. Basically, iPhoto can't be downloaded by anyone anywhere in the world unless the app store has it listed in your "purchases" list. The threads contain a lot of steps and it looks like this could be difficult for novices like me.
Rysz,
I will also look at the link you provided before I get started. Thanks.

Recovery and Black Point sliders not available

Hi, I notice that these sliders are not available for RAW files that were loaded onto Aperture 1.5. Is there something I can do so I can make use of these sliders?
Cheers,
Mike

Yes. Migrate the image to which you wish to apply these two adjustments to the 2.0 RAW converter. Mind that your colours may shift; possibly the best way to do this is to remove all adjustments first; this will also cause the image to be interpreted by the 2.0 RAW converter.
Cheers,
k.

Updated to 10.5 on XP and now iTunes will NOT open - Entry Point Not Found - HELP!

Tried to update to iTunes 10.5 on Windows XP. Everything seemed to install properly and I restarted. However, when I try to open iTunes, it will not open and I get the following error message:
iTunes.exe - Entry Point Not Found
'The procedure entry point AVCFAssetClassWithByteStreamAndOptions coulf not be located in the dynamic link library AVFoundationCF.dll'
When I click 'OK' (which is the only option), it says:
'iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)'
I have updated iTunes on my machine in the past numerous times without ever having an issue. Now, I get this and cannot access iTunes at all. I have tried reinstalling 10.5 and restarting my machine about five times now...to no avail. I am hesitant to remove iTunes, since I have 6000 songs and do not want to lose my library. Is there anything I can do? Seems like it should be a simple fix.
When I called Apple, they told me to upgrade my OS to Vista. Huh? That seems like overkill to me. iTunes has always run fine on XP.
Please help!

I found another site and it suggested that I go through System Preferences and check downloads again. The iTunes update was still there indicating that it still needed to be downloaded. So I downloaded it again and now it works fine. I hope this might help someone else.
Thank you

Generic Delta with Numeric pointer.

Hi Experts,
We are using a generic delta for a Standard Master Data Attribute Data Source. Since it is standard by default it has the Numeric Pointer and the Additive Delta in the settings.
When a delta extraction is done with this option it does not bring any changed records it just brings the newly added records.
We are not able to change to the other Delta options available in that screen.
Could you guys help us with this issue.
Thanks
Sandhya

Hi Harvinder,
The answer you gave was very helpful.Thanks for all your help so far.
Due to some restrictions from our BASIS team, We are not able to Check the 'Change Document' for (AEDAT) Changed on field. There are other fields in the same Data Source which are Delta Enabled and they also have the 'Change Document' Checked. Could we use one of those fields in our Delta. If yes what changes do we have to make. If you can, Can you give a brief step by step how to make the changes.
Also we are not able to change anything in the Generic Delta tab. At times it is giving an error, other times it does not get saved when we go back it is unchaged. May be we are doing something wrong.
Regards,
Sandhya

Generic Delta with numeric pointer (Without safety interval and no field)

Hi
We have problems with Generic Delta extraction. Our previous Dev has created the data source with numeric pointer as the data source without any safety interval and without any field for numeric pointer selection even we have the date field (creation and change dates in view)....
He created the generic delta with numeric pointer and Additive delta selection on top of view (EKKO,EKPO and EKKN). So we are missing lot of records. Now I need to fix this asap, I have done generic delta with timestamp and cal day with change/creation date.
Now in order to fix our delta loads should I use the cal day as the delta pointer with change or creation date already available or is it ok to use numeric pointer with additive delta and safety lower limit as 10 or 20 with upper limit blank?
Also Should I use any field in the field nm section or is it ok to leave it blank ? Please advice...
Note: I checked the missing delta records in ECC and the change timing is in the afternoon and our load time is only night...We also have several other data sources with same settings (numeric with no safety and no field) but it is not giving any issues.
Thanks
Edited by: ganesh uttitti on Jan 26, 2011 10:33 PM

Hi Ganesh ,
I'm a little confuse,Why are you not use LO Delata for it?

Saving master page in search template throws error "UserAgent not available, file operations may not be optimized"

Hi Folks,
I was trying to save basic search template master page "seattle.master" after making change to the template.
I have added just "CompanyName" folder and update the line below in seattle.master.
Change is this : <SharePoint:CssRegistration Name="Themable/CompanyName/corev15.css" runat="server"/>
When I save it, and refresh page on browser, it shows "Something went wrong" error.
ULS says the following error : "UserAgent not Available, file operation may not be optimized"
Pls let us know if there is a solution.
Any help Much appreciated !
Thanks,
Sal

Hi Salman,
Thanks for posting this issue,
Just remove this below given tag and check out. It might be happened that your control is conflicting with others.
Also, browse the below mentioned URL for more details
http://social.msdn.microsoft.com/Forums/office/en-US/b32d1968-81f1-42cd-8f45-798406896335/how-apply-custom-master-page-to-performance-point-dashboard-useragent-not-available-file?forum=sharepointcustomization
I hope this is helpful to you. If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Why adobe pdf file to word converter professional online is not available in India where ADOBE as a company itself has established such large offices in Bangalore etc...its ridiculous to see messages on cloud.adobe that some services are not available i

Document Cloud PDF services

Thank you for your responses.. To Sjazbec, At least you guys in Germany and the Netherlands have some kind of posters from Apple to let you know that the feature is not available.
There is no such warning on the Irish Apple site.!
My point was that, I would not have even considered trying to reorganize my itunes library had I known that the feature is not available in Ireland.
And that falls into the domain of Apple Ireland advertising.. which I"m sorry to say is false and misleading.
There are no "posters" telling the Irish customer that icloud / itunes music is not available!
I"m not blaming Apple for not "having the feature" in Ireland.. I am upset at them for falsing advertising a feature that they cannot for whatever reason deliver to Irish customers..
To Keats 2010 LOL... Trust me there were lots of clouds in Ireland today!.. It's a long time since we've seen the sun!.. As for getting your head around the basics.. I could talk you through everything that doesn't work in Ireland if it's any help lol

The Default Gateway Is Not Available / Problem

Hello, I recently purchased this HP Pavileon laptop, and I've been encountering this problem very often (every 2-10 minutes). This problem is getting extremely frustrating as absolutely nobody has been able to provide a fix for this issue.
When the laptop is on battery mode (this does not happen when plugged in); I commonly get disconnected from my wi-fi connection and to fix it, I must run the troubleshooter. This temporarily fixes the issue by resetting the wi-fi adapter.
What I have tried and has not worked:
* Turn off to save power option in the driver settings (in Device Manager) untickets
* Updated drivers
* New power plan
* Tried different drivers
* Complete system restore
The wireless adapter is Realtek RTL 8188EE. Upon running the troubleshooter, this is all the information from the detailed information section:
Windows Network Diagnostics
Publisher details
Issues foundThe default gateway is not available
The default gateway is not availableThe default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Fixed
Reset the "WiFi" adapter
Completed
Investigate router or broadband modem issues
Not run
Issues found
Detection details
6The default gateway is not availableFixed
The default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Reset the "WiFi" adapterCompleted
This can sometimes resolve an intermittent problem.
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Repair.1.etl Investigate router or broadband modem issuesNot run
If you're connected to a hotspot or domain network, contact the network administrator. Otherwise: 1. Unplug or turn off the device. 2. Once all the lights on the device are off, wait at least 10 seconds. 3. Turn the device on or plug it back in to the power outlet. To restart a router or modem that has a built-in battery, press and quickly release the Reset button.
Detection details
Diagnostics Information (Network Adapter)
Details about network adapter diagnosis:
Network adapter WiFi driver information:
Description . . . . . . . . . . : Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Manufacturer . . . . . . . . . : Realtek Semiconductor Corp.
Provider . . . . . . . . . . . : Realtek Semiconductor Corp.
Version . . . . . . . . . . . : 2012.2.827.2013
Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem8.inf
Inf File Date . . . . . . . . . : 12 September 2013 10:17:00
Section Name . . . . . . . . . : HP8188ee.ndi
Hardware ID . . . . . . . . . . : pci\ven_10ec&dev_8179&subsys_197d103c
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2014-07-24 04:19:49-759
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 0 item(s) total, 0 item(s) displayed
Connection History
Information for Auto Configuration ID 1
List of visible networks: 1 item(s) total, 1 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
Infra <unknown> Yes 100 Yes Matt
List of preferred networks: 1 item(s)
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: Yes
Information for Connection ID 1
Connection started at: 2014-07-24 04:19:49-759
Auto Configuration ID: 1
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: 98-fc-11-88-61-b8
Security and Authentication
Configured security type: WPA2-PSK
Configured encryption type: CCMP(AES)
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: Yes
Multicast key received: Yes
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 34302
Ndis Tx: 32619
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 0
Rx failure: 0
Tx success: 0
Tx failure: 0
Tx retry: 0
Tx multiple retry: 0
Tx max lifetime exceeded: 0
Tx ACK failure: 0
Roaming history: 0 item(s)
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Result of diagnosis: There may be problem
Diagnostics Information (Wireless Network Adapter)
Details about wireless network adapter diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Native WiFi MSM
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Connect even if network is not broadcasting: No
Result of diagnosis: There may be problem
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Diagnose.0.etl
Other Networking Configuration and LogsFile Name: NetworkConfiguration.cab Collection information Computer Name: LAPTOP Windows Version:6.3Architecture:x64Time:24 July 2014 04:34:47
Windows Network Diagnostics Detects problems with network connectivity. Package Version:1.0Publisher:Microsoft Windows

Run the HP Support Asssitant's Tune up application. There should be a new BIOS available. sp66866
Have you installed the latest Windows 8.1 updates?
Do not install optional video graphics updates.
I was runnning into a similar problem with my HP product loan Envy Spectre 13 TouchSmart Ultrabook until I did the updates. I had upgraded my wireless router to a model with 802.11AC specification.
Invoke the Device Manager and ensure that the box next to Allow this computer to turn off this device to save power is unchecked.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Data not available in cube

Hi all,
I have just loaded the data from PSA to DSO, and then from DSO to Cube.
New requests enter in the Cube. When tried to check the contents of this new request, there is no data at all.
But if i check the contents of the requests of DSO , there is data in it. i have used this request to transfer the data to Cube , but in the cube i cannot find the data at all.
I have tried checking the contents of this cube by running a query in the Query Designer, but there also i could not find any data , it gives "no data found".
can any one please help me regarding this issue?
Thanks in advance..
Regds,
Maddy

Hi Maddy.
Please verify that there is no data in the cube from TA LISTCUBE.
You might have choosen some chars and KF that is not available in the cube in the query designer.
The records could also happen to not be updated in the cube because of update rules etc.
Hope it helps (assign points if helpfull!).
BR
Stefan

Numeric Pointer not available

Similar Messages

Maybe you are looking for