Numerours open extract requests pending

Hi,
When the basis consultants installed a support package, it resulted in an error - 'Numerours open extract requests pending' and have requested ABAPers help.
CAn you please guide me how to process these extract requests.  It will be good, if i get any pointers on this.
thanks,
Sridevi

Hello,
I was dealing with same situation on our system and searching for some “safe” solution. Today I found “new” (14 days) SAP “Note 1083709 - Error when you import Support Packages”, which includes a new report RMCEXCHK, which should help you diagnose the steps you need to carry out.
It is somehow similar to the report RMCSBWCC, but this report is LIS structure based (You cannot run it generically).
You already found report RMCEX_SETUP_ENTRIES, which checks for entries in MC*SETUP tables.
I am not  a BW expert, as far as I know, business events triggers insertion of entries in LO queues  MCEX, jobs defined in trans. LBWE (LIS-BW-VB_APPLICATION) periodically transfer data to BW delta queues and from there BW system then gets the data.
Regards, Matjaz

Similar Messages

  • R/3 SP Import:Open data Extraction requests Error

    We are getting the below error when Basis doing the upgrade support packeage in R/3 source system.
    Open Data Extraction Requests
    The system has found a number of open data extraction requests. These
    should be processed before starting the object import process, as
    changes to DDIC structures could prevent data extraction requests from
    being read after the import, thus causing them to terminate. You can
    find more information about this problem in SAP Note 328181.
    Call the Customizing Cockpit data extraction transaction and process all
    open extraction requests.
    Intially we have cleared the entries in LBWQ,RSA7 and SM13.But after clearing these entries also we are getting the same above error.
    For support package upgrade in R/3 do we need to delete the SETUP table also in production environment?.
    Is there any other way around without deleting the setup table to upgrade support package in R/3 system?
    Please help us with your inputs urgently..
    Thanks
    Message was edited by:
            Ganesh S

    Thanks Siggi for the suggestion.
    We have already cleared the v3 updates by running RMBWV* job manually.After clearing all the entries in LBWQ,RSA7 and SM13 still we have got the same above error.
    When we imported In R/3 development system after deleting the setup table we didn't get the above error.But we are concerned about deleting the setup table in production system
    though already deltas are running fine.
    Is there any other way around? or deleting the setup table is the only option?
    Please help...

  • SPAM/SAINT - Open Data Extraction Requests

    Hello All i am getting an warning during implementing patches for netweaver 701 sp3 and sp4.
    "  Phase CHECK_REQUIREMENTS: Explanation of Errors
    Open Data Extraction Requests
    The system has found a number of open data extraction requests. These
    should be processed before starting the object import process, as
    changes to DDIC structures could prevent data extraction requests from
    being read after the import, thus causing them to terminate. You can
    find more information about this problem in the SAP Notes 1081287,
    1083709 and 328181.
    Call the Customizing Cockpit data extraction transaction and process all "
    i checked listed note and implemented the same but still its showing me something in LBWE. i deleted all setup data for all the application data using tcode LBWG but its still showing in LBWE tcode.
    this is the error i am getting after runing program 'RMCEXCHK'
    Struct. appl. 04 cannot be changed due to setup table -> Long text
    Message no. MCEX141
    Diagnosis
    Changing the extract structure  for application 04 is not permitted, because the restructure table MC04P_0ARBSETUP for the extractor still contains data in 800.
    You cannot change the structure in this status, because when you load an InfoPackage from BW, this leads to errors.
    Procedure
    Delete the entries for all restructure tables for application 04.
    Any reply will be highly appreciated.
    Mani

    Hi Mani
    I am also facing the same issue. Can you please tell me how you have resolved the issue.
    Thanks & Regards
    Venkat

  • Email Notification: WorkItem - Unable to open Access Request

    Hi,
    I am using AC 10.1 with SP06
    I have configured Email-notification for the new workitem to approve or reject and this is working completely fine. The approver is getting the mails triggered with the link to goto WorkInbox. All the requests are clearly visible but I (or any approver for that matter) can't open/access the request.
    I had copied the URL link by opening the workinbox and then with right click --> Technical help and pasted the same link in the email subject content. Hope this is the right way to provide the link to work-inbox
    But I can access/open the same request, if I go via the normal procedures SAPGUI --> NWBC --> MyHome --> Workinbox
    Ofcourse, I would've missed some things but not sure what it is.
    I have followed http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/605077fc-3577-2e10-e1a6-a743514d4eb3?QuickLink=index&… to come so far.
    I assue the issue (not sure though) might be with the package, where I saved the email document, While creating the new email template at the time of saving it, I created one custom package ZGRC, as you can see there are some of the package encapsulation which are not captured. Is this causing the issue?
    Awaiting for you quick and positive response.
    Thanks,
    Ameet

    Hi Alessandro,
    I have mentioned the URL link under %PATH% as below:
    You mean SSO to NWBC..?
    This is not in place till now. But how come this could be the issue..? I understand that SSO will take approver directly to the workinbox link
    I have saved my log-in credentials with Chrome browser so whenever i click on the link coming from the email notification, the browser doesn't ask me to enter ID, password and takes me to my workinbox items wherer i can see the requests pending for my approvals.
    But if i use the same link on IE, it asks me to enter credentials, as I didn't save the ID and password So, after providing the credentials, I can see the requests pending for my approval, but UNABLE to open/access any of the requests.
    I have activated all the required services as well.
    Ameet
    Message was edited by: Ameet kumar

  • Open PR and Pending PO

    Hi All,
    What is open PR and Pending PO,I nee to createe a report for Open PR qty,Open PR value,Pending PO qty,Pendng PO value,how to identify the PR and PO are closed and pending,help me pls.
    Thanks&regds,
    sree.

    Hi,
    You can get the Information about Pending PO from the following T.codes by specifying the appropriate selection Parameters.
    T.code - ME2N,ME3N & ME2L  (Purchasing Documents/Doc Number)  ,ME3L (Purchasing Documents/Vendor)
    Thanks,

  • Supplier Open Interface Request Set

    Hi,
    We are in the process of implementing EBS R12.1.3 in one of our clients site. For supplier,contacts and site detail creation we populate the AP_SUPPLIERS_INT, AP_SUPPLIER_SITES_INT and AP_SUP_SITE_CONTACT_INT tables and run theSupplier Open Interface Request Set. It completes without any warring and but stating as 0 suppliers import in the out put file.
    When I check the status of above tables, in AP_SUPPLIERS_INT as "New"and AP_SUPPLIER_SITES_INT,AP_SUP_SITE_CONTACT_INT as "Rejected".
    But it also can't find the rejected reason in AP_SUPPLIER_INT_REJECTIONS table as well.
    Attached here with the sample record we uploaded.
    As we are in middle of a implantation, awaiting for your earliest response.
    Thanks / Lathika

    Hi Lathika,
    Pl. refer following link
    Suppliers interface in R12
    If possible, post the sample code.
    HTH
    Sanjay

  • Handle not valid for open spool request

    Hello everyone,
    i am facing an error while clicking the print preview option in change PO (me22n).
    i have given the dispatch time in further data of o/p as 'Send with application own transaction'.
    now, when i save and click print preview button i get an error as
    "Handle not valid for open spool request"
    Kindly give me some idea how to tackle this.
    Thanks
    gaurav

    Gaurav,
    I am having a similar issue and would appreciate if you could let us know how your problem was solved?
    What control parameters did you change to make this work?
    Thanks,
    Jay

  • !!! WARNING !!! -- libgcc_s-2.3.2-stub.so , when open CM request log/output

    Patch 12415211 was applied to one of two web/form nodes in out EBS R12.1.2 environment long time ago,  by using OPatch I believe.
    I do not know that since the previous apps DBA left the company, and just followed Doc ID 761566.1 to apply patch 12415211 to the two nodes by using manual copy steps.  Now. when I start all services on the node that had it applied before, I can not open the Request log and output html page. It gives below message.  But, when we only use one node that did not have the patch applied before, all works fine. THe message is
    !! WARNING !!! --> libgcc_s-2.3.2-stub.so
    This is a stub library which can be used for linking only.  It must *not* be used as a runtime library.  Please make sure this library is not found in LD_LIBRARY_PATH
    How can I fix the problem?   I run sqlplus and start services without problem.
    Thank you.

    Hi,
    have you done the relink after performing above steps as mentioned in the Doc ID 761566.1 (Update AS 10g (10.1.2 and 10.1.3) Oracle Homes (Oracle Linux 6 and RHEL 6 only)) ?
    If not, can you please try to relink and retest.
    -Kj

  • Extract the Pending Proposal which is not posted but not deleted F110

    Dear Friends,
    User has raised new requirement to extract the Pending proposal in F110 which is pending for final run but not deleted by user. 
    Please advice how can I extract the pending proposal which is pending for final run in F110.
    Thanks in an advance.
    Regards,
    Pankaj

    Hello Pankaj,
    There are two mthods, first one is F110 > Edit > Proposal > Proposal List. Another way is SE16 > REGUH > input X selection criteria in input field REGUH-XVORL (Indicator: Only Proposal Run?)  to list proposal pending for final payment.
    Kind regards,
    John Chin

  • Cannot open database " " requested by the login. The login failed. SQL Server 2008 Express

    I am getting this message when I try to create a path to a work file from my application.
    Cannot open database " " requested by the login.  The login failed. 
    SQL Server 2008 is installed.  I have placed the computer name and instance in the application's config file as connection source. 
    The database is also not showing up in SQl Server Management Studio in list of databases.
    Thanks.

    Hello,
    Can you please confirm login exist in the sql server and its mapped to particular database.
    Are you directly connecting to SSMS?
    Or using any 4 part query?
    Please share how you are accessing the DB and screen hots of error messages.
    Thank You.
    Regards, Pradyothana DP. Please Mark This As Answer if it solved your issue. Please Mark This As Helpful if it helps to solve your issue. ========================================================== http://www.dbainhouse.blogspot.in/

  • Unable to close Open RDA Request

    Hi,
    Could anyone please let me know, how can we close an open RDA request through process chain. I have used process type 'RDA_CLOSE' to automatically close the request soon after the upload. But it did not work.
    I have applied SAP Note 1001488  “Closing RDA requests with process type” , but this also did not work. I get an error message " Operation MARK_AS_TO_BE_CLOSED could not be carried out for RDA_INFOPACKAGE ". Any help is highly appreciated.
    Info: Currently we are on SP09.
    Thanks in advance !!!
    -Amit

    Hi
    As a general rule, whenever you got this kind of message:" This entry already exists in the following tables ", you have no other choice but log a support ticket. It seems as a database inconsistency.
    Also refer these note:1359365,1254435 might be helpful.
    I request you to raise a support ticket in SAP support portal inorder to clarify whether its a bug.
    Giri

  • Objects are locked in open change requests during support packs update

    Hi All,
    We are applying support packs in the ECC Dev system. Its giving error in phase OBJECTS LOCKED..?  after that i checked with ABAP consultant he given requests which i unlocked the objects from SE03. Still the same error Objects are locked in open change requests is coming.
    If i checked requests which are not released, those are in hundreds which we can not release. How can i find a specific object which i need to unlock or any chance to skip the phase and continue. Because 15 days back i have updated the support packs without any of the issue.
    Please suggest me whether i can find the specific objects to unlock or any other process.
    Thanks & Regards,
    Sreekanth

    sreekanth jd wrote:
    Still the same error Objects are locked in open change requests is coming.
    >
    Hello,
    Normally when we double click on that error message 'objects are locked', system takes us to the transport requests containing those objects in question.
    And did you try SE03 --> Objects in Requests --> Search for Objects in Requests/Tasks ?
    Thanks

  • ORA-29270: too many open HTTP requests

    Hi,
    We have a requirement like, we will get bulk data (2 GB) data file with different languages(Russian, chinese, Japanese, German) etc. and we need to load these data into our databse also we have to translate the same.
    We are using Oracle 11g.
    We had used Oracle httpuritype - And the below mentioned procedure PROCEDURE TEST.PRC_TRANS_GERMAN will call the function - trans_jef
    Input parameter for PRC_TRANS_GERMAN - > To_language and from Language. and this procedure will store the translated word in the seperate table.
    Input parameter for the function trans_jef - > Word to be translated , from languae, to_language. And this function will return the translated word.
    The issue I am facing is when I am passing the table of around 10000 records, around 4000 rows are not getting translated. So when i try to capture the error in exception- the error is
    ORA-29273: HTTP request failed
    ORA-06512: at "SYS.UTL_HTTP", line 1819
    ORA-29270: too many open HTTP requests
    When I try to re execute the missed words, they were translated. But they are not getting translated in one go because of the too many http open request.
    So could you please let me know how to resolve this ORA-29270 errror. I know we have to end the request and start again. But not sure how to do. Can some one help with this~!!!!
    Translator
    CREATE OR REPLACE FUNCTION trans_jef (v_RawText    IN VARCHAR2,
                                          v_SrcLang    IN VARCHAR2,
                                          v_DestLang   IN VARCHAR2)
       RETURN CLOB
    IS
        v_EscRawText    VARCHAR2 (3000);
       v_XlateUrl      VARCHAR (3000);
       --v_SrcLang Varchar(10) ;-- := 'de';
       --v_DestLang Varchar(10) ; -- := 'en';
       v_XlateResult   CLOB;
       l_result        CLOB;
    BEGIN
       DBMS_OUTPUT.ENABLE (10000000);
        v_EscRawText := UTL_URL.escape (v_RawText, TRUE, 'UTF-8');
       v_XlateUrl :=
             'http://translate.google.com/translate_a/t?client=t&text='
          || v_EscRawText
          || '&hl='
          || v_DestLang
          || '&sl='
          || v_SrcLang
          || '&tl='
          || v_DestLang
          || '&ie=UTF-8&oe=UTF-8&multires=1&oc=1&prev=btn&ssel=0&tsel=0&sc=1';
         v_XlateResult := httpuritype (v_XlateUrl).getclob ();
       -- dbms_output.put_line (v_XlateResult);
       l_result := TRIM (BOTH '"' FROM REGEXP_SUBSTR (v_XlateResult, '"[^"]+"'));
        RETURN l_result;
    END;
    /* Formatted on 07-09-2012 09:21:05 (QP5 v5.215.12089.38647) */
    CREATE OR REPLACE PROCEDURE TEST.PRC_TRANS_GERMAN (TO_LANG1     IN VARCHAR2,
                                                       FROM_LANG1   IN VARCHAR2)
    IS
       P_CHINESE         VARCHAR2 (3000);
       FROM_LANG         VARCHAR2 (3000);
       FROM_LANG_CODE    VARCHAR2 (3000);
       TO_LANG_CODE      VARCHAR2 (3000);
       FROM_LANG_CODE1   VARCHAR2 (3000);
       TO_LANG_CODE1     VARCHAR2 (3000);
       cnt               NUMBER := 1;
       counter           NUMBER;
       CURSOR C1
       IS
          SELECT RAW_VAL_TXT FROM T_TRANS_VAL;
       VC1               C1%ROWTYPE;
    BEGIN
       OPEN C1;
       LOOP
          FETCH C1 INTO VC1;
          EXIT WHEN C1%NOTFOUND;
          BEGIN
             TO_LANG_CODE :=
                CASE TO_LANG1
                   WHEN 'English' THEN 'en'
                   WHEN 'Chinese Simplified' THEN 'zh-CN'
                   WHEN 'Chinese Tradational' THEN 'zh-TW'
                   WHEN 'German' THEN 'de'
                   WHEN 'Japanese' THEN 'ja'
                --other languages
                END;
             FROM_LANG_CODE :=
                CASE FROM_LANG1
                   WHEN 'English' THEN 'en'
                   WHEN 'Chinese Simplified' THEN 'zh-CN'
                   WHEN 'Chinese Tradational' THEN 'zh-TW'
                   WHEN 'German' THEN 'de'
                   WHEN 'Japanese' THEN 'ja'
                other languages
                --                 else 'auto'
                END;
             SELECT trans_jef (VC1.RAW_VAL_TXT, FROM_LANG_CODE, TO_LANG_CODE)
               INTO P_CHINESE
               FROM DUAL;
    -- same translator function is used. Language used is simplied chinese.
    -- We can use traditional Chinese as well ('zh-TW'), which works perfectly.
             FROM_LANG_CODE1 := --decode(from_lang,'en','English','ar','Arabic', from_lang);
                CASE FROM_LANG_CODE
                   WHEN 'en' THEN 'English'
                   WHEN 'zh-CN' THEN 'Chinese Simplified'
                   WHEN 'zh-TW' THEN 'Chinese Tradational'
                   WHEN 'de' THEN 'German'
                   WHEN 'ja' THEN 'Japanese'
                --other languages
                END;
             TO_LANG_CODE1 := --decode(from_lang,'en','English','ar','Arabic', from_lang);
                CASE TO_LANG_CODE
                   WHEN 'en' THEN 'English'
                   WHEN 'zh-CN' THEN 'Chinese Simplified'
                   WHEN 'zh-TW' THEN 'Chinese Tradational'
                   WHEN 'de' THEN 'German'
                   WHEN 'ja' THEN 'Japanese'
                --  other languages
                END;
             INSERT INTO t_trans
                  VALUES (FROM_LANG_CODE1,
                          VC1.RAW_VAL_TXT,
                          TO_LANG_CODE1,
                          P_CHINESE);
             COMMIT;
          EXCEPTION
             WHEN OTHERS
             THEN
                 INSERT INTO excep_trans (P_WORD_EXP, UPDATE_TIME, COUNTER)
                     VALUES (VC1.RAW_VAL_TXT, SYSDATE, cnt);
                INSERT INTO error_message
                     VALUES (DBMS_UTILITY.FORMAT_ERROR_STACK);
                 COMMIT;
          END;
        END LOOP;
       CLOSE C1;
    END;
    /Edited by: 950814 on 6 Sep, 2012 11:16 PM

    Simply add the call to your exception hander. E.g.
    EXCEPTION
             WHEN OTHERS
             THEN
                   UTL_TCP.Close_All_Connections;
                   INSERT INTO excep_trans (P_WORD_EXP, UPDATE_TIME, COUNTER)
                     VALUES (VC1.RAW_VAL_TXT, SYSDATE, cnt);
    ..etc..
    END;Also consider using proper coding standards. There is NO modern day programming language standard that says to write (selective) reserved words in uppercase. Write in lowercase. Use camelcase and pascalcase for variable names and procedures/functions/methods. Restrict the use of uppercase to defining identifiers such as compiler macros or constants.
    Do yourself a favour and read, understand and apply the basic naming standards as detailed in .Net Guidelines for Names and Code Conventions for the Java Programming Language.

  • Open transport request in Development server which is not moved to Producti

    HI All,
    I am doing upgrade from ECC5.0 to ECC6. EHP4.
    We have some open Transport request in development server which are not moved to PRD.
    Now client wants to stabilize their both the systems, want to compare each trasport in PRD.
    My question is, if they dont want that request to move to PRD, what we have to do?
    We have to delete the tranport and select the active version of tranport which is there in PRD or how.
    Please suggest me how to proceed for this scenario. we have lot of transports. ( Tables,programs,classes,methods,etc.,)
    Regards,
    sarath

    Hello Sarath,
    1st question: did you already finish your upgrade? If not, at which phase is it at?
    2nd: did you upgrade your DEV system already to the same level as PRD?
    3rd: were these transports generated in an old version (like ECC 5.0)? If yes, and now you have an ECC 6.0 system, you must not import them on this system, as they have different versions. If you do it, you'll make your system inconsistent.
    Please clarify on these points so we can help you.
    Best regards,
    Tomas Black

  • 5 months passed and I didn't receive an item. and I can't open a request (no more option)

    5 months passed and I didn't receive an item. and I can't open a request (no more such an option). the item is new hot European women car pattern handbag fashion shoulder messenger bag ( 181348649935 ) 

    Oh dear.EBay only allows 45 days for a dispute to be opened for Item Not Recieved.Normal delivery, in my experience, would be15 days from Europe*20 days from North America30 days from Asia.**At that point, you should be asking the seller for the date of shipping, the service used and the tracking number. It is not important that the seller have a tracking number, on low cost items there won't be one. You want his response.If the response is unsatisfactory (anything less than a useable tracking number or a full refund is unsatisfactory) then move to the Dispute within 45 days. Since January, Paypal has allowed refund claims to be opened for 180 days. That's six months but act today.So you should go to your PP account and look for the Resolution Centre on the left side of your Payments page.You will need the number of the PP transaction. If the seller cannot prove delivery, he will be required to refund your original payment. If he doesn't , PP will refund you and go after the seller for their money. Hard. If neither works, you can try going to the credit card you really paid with (PP is really just a useful mediator) and phone the 1-800 number on the card. Ask the customer service rep about a chargeback. So you have three levels of protection.Go get your money.   *Europeans tend to ship by Air Mail.**Asian sellers will tell you it takes longer. Maybe, but usually this is a sign that you are being scammed.

Maybe you are looking for