Numerous output messages appearing in PO

Hi SAP Gurus,
I have created the PO and saved.When I see the Messages in PO, there are so many NEU messages appearing , which is already processed.These NEU messages are not only the particular VN(Vendor), it is also displaying another  VN, which is not maintained as partners or any where in Vendor...
Can you please help us to know..why it is showing so many messages in PO.and why it is showing other VN in PO.
correct answers are rewarded.
by
Jonnakuti Raju

hi
go to MN05 and check the entries for condition NEU
if there are multiple entries for the vendor and plant combination then delete them and cretae new in MN04 for the combination of pur doc  without any vendor
regards
kunal
award if helpful

Similar Messages

  • JIT output message appearing in FRC - LPA Schedule agreement

    We have seperate messages for JIT and FRC, When i set JIT message condition record, its appearing in both JIT and FRC, not sure why, it suppose to be appearing in JIT only
    Can some one help/suggest

    Hi
    You need to check the fine tune control of message type in the below config
    spro>MM>purchasing>messagesoutput control->message types>define message type for SA/release
    When you click there you get fine tune option. In that 9 for FRC and A for JIT. If you don't want to trigger FRC for XYZ condition type, remove that assign ment.
    regards
    Antony

  • Red Light in Output Message for Print

    Hello.
    When I create an Output Message to Print a Purchase Order, a red light appears in the status column.
    Then when a I click over, the system said " No Analysis Log exist".
    Does anyone know what turns this on?
    I appreciate your help.
    Hector.

    Hi,
    Check following options:
    Option:1-->Are you using two output type of Purchase order Print( one is default output type & one you are entering manually).
    Check your entry of print operation ( 1 or 2) for your PO output type manually in following path:
    SPRO>MM>Purchasing>Message>Output control>Message type> Define message type for Purchase Order-->Fine-Tuned Control: Purchase Order
    Option:2-->Have look on dispatch time ( 1 or 2 or 3 or 4) set for output type in NACE t.code
    Option:3--> In NACE t.code for output type, check CannotBeChanged check box selected or not in default tab.
    Regards,
    Biju K

  • PO Output Message Disappears

    Hi All,
      We have some PO's created in 2011,2012,2013,2014 for which the output message has disappeared. Client wants to see to whom from supplier side the purchase order has been sent, so they wants to see the output type in PO now. But we have checked even in NAST table where we don't have any condition record for proof (EDI, Streamserve, Mail), but client says that message type has triggered and the PO's were successfully sent to supplier.
    Could you please tell me if you have any insight on where to find the trace of these missing message types? Awaiting for your reply.
    Regards,
    Prasath

    Hi,
    PO's created in 2011,2012,2013,2014 and client says that message type has triggered and the PO's were successfully sent to supplier but message type not appearing in PO- just cross check did message type deleted after PO sent to supplier.
    Also cross check PO change history in t.code:ME23N  or in CDHDR and CDPOS tables
    Regards,
    Biju K

  • Material Document Output Message

    Hi
    I cutomize the Mat.Doc Output Message WE01 to ZE01.
    In OMJ3 I already removed the WE01 for the new plant.
    However still in the Plant#2000 material document picks up both message
    Where else i should remove ?
    Thanks
    MM

    Hi Garapati 
    Output WE01 is already in use at other plants (ex; 1000) using different forms.
    ZE01 which is to be used for plant 2000.
    So, I can't delete in Output Determination or NACE/T.
    I thought if I dont maintain the WE01 output type in OMJ3 for Plant 2000, suppose to not appear and only appear the ZE01.
    But now both appears.
    Rgds
    MM

  • BAPI to create output messages in material document?

    Our stores manager has a list of material documents which require a repeat output. There are far too many for someone to manually go into each document and create a new message in the output options.
    Is there a BAPI or transaction which can be used to create output messages for multiple MIGO material documents? 
    The ones required in this case are WE03 output messages.
    Many thanks
    Karen

    Sorry, I should have said that the original documents were printed as WE01 outputs when they should have been WE03. We need to create new messages with WE03 as the type not WE01. Therefore it is not just a repeat output.
    Therefore I don't think we can use MB90. Also it doesn't appear to let you enter multiple material documents.
    Does anyone else have any ideas.
    Thank you
    Karen

  • Using SXMB_MONI to view input and output messages

    Within XI can I view both the input message and the output message ?
    I have an IDOC Order being transformed into XML format.  Using SXMB_MONI I can see the transaction and the input IDOC Order but cannot see the resulting output XML Order.  Is it possible to do or is there some other transaction?

    Hi,
    Check in SXMB_MONI for xml message it is appearing the pipeline steps , if not do the below setting to appearing piepline steps in moni.
    Tcode : SXMB_ADM
    Execute integration engine and configuration
    click on specific configuration
    go to change mode
    Category : RUNTIME
    Parameter :  LOGGING
    Current value : 1
    then save..test the scenario once again.
    now go to moni double click the message check the xml message has left hand side pipeline steps are appearing..
      Expand Inbound mesage -> Expand the Payloads -> Double maindocument you will find the input payload
      Expadn Technical routing -> Expand the Payloads -> Double maindocument you will find the output payload
      then you will find the output xml payload.
    Regards,
    Venu.

  • Weird output message determination in po

    dear all,
    i'm a little confuse about output message determination in PO.
    when i create a PO with me21n, i set a vendor and then verify message output determination : a message is generated.
    but then, when i modify an item and change po type, which also have an info record, the message generated previously disappear.
    the same problem appear with all po type and they all have an info record...
    thank you for helping

    Hi,
    The PO type you mean is the document type (NB and all)
    makes your message output disappear. The you have condition record maintained for that PO document type.
    Go to MN04 select your output type whatever you are getting with the first document type and select key combination, Purchasing outputdetermination : document type and enter the new document type you are using and execute
    with other details like function as VN and all as per your requirement.
    This is a master data and has to be maintained like material masters and you can decide upon the key combinations and the output trigger methods ( fax, print and all) here.
    Best regards,
    Sridhar.
    Award points for useful answers

  • [svn] 4463: Use svn: ignore to suppress some new build output from appearing in 'svn status'.

    Revision: 4463
    Author: [email protected]
    Date: 2009-01-08 18:33:41 -0800 (Thu, 08 Jan 2009)
    Log Message:
    Use svn:ignore to suppress some new build output from appearing in 'svn status'.
    AIR SDK Readme.txt
    frameworks/projects/air
    lib/fxgutils.jar
    modules/fxgutils/classes
    QE Notes: None
    Doc Notes: None
    Bugs: None
    Reviewer: None
    Property Changed:
    flex/sdk/trunk/
    flex/sdk/trunk/frameworks/projects/
    flex/sdk/trunk/lib/
    flex/sdk/trunk/modules/fxgutils/

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • When trying to send an email this message appear: No se ha podido firmar el mensaje

    When trying to send an email this message appear: No se ha podido firmar el mensaje. Se ha producido un error al intentar firmar este mensaje con un certificado de “[email protected]”. Compruebe que su certificado para esta dirección sea correcto y que la clave privada correspondiente esté en su llavero.

    Hi Srini,
    OS is XP
    Database = 10g
    EBS - 11.5.10.2
    When i tried with simple code like below i am getting mail .
    CREATE OR REPLACE PROCEDURE APPS.send_mail (p_sender IN VARCHAR2,
    p_recipient IN VARCHAR2,
    p_message IN VARCHAR2)
    as
    l_mailhost VARCHAR2(255);
    l_mail_conn utl_smtp.connection;
    BEGIN
    SELECT value value1
    INTO l_mailhost
    FROM v$parameter
    WHERE name like '%smtp%';
    l_mail_conn := utl_smtp.open_connection(l_mailhost, 25);
    utl_smtp.helo(l_mail_conn, l_mailhost);
    utl_smtp.mail(l_mail_conn, p_sender);
    utl_smtp.rcpt(l_mail_conn, p_recipient);
    utl_smtp.open_data(l_mail_conn );
    utl_smtp.write_data(l_mail_conn, p_message);
    utl_smtp.close_data(l_mail_conn );
    utl_smtp.quit(l_mail_conn);
    end;
    Can you please let me know if i am wrong in the following one
    1. After running the program, the output saves at ''/u07/applmgr/dev/devcomn/admin/out/DEV_wg-oa-01/RGADWALA.5929617"
    This information i got from fnd_concurrent_request table.
    * Do i need to have Write and Read permissions for the above said path
    2. The above said path I can see in the V$parameter table for column Name = 'utl_file_dir'
    3. I even created an Directory Name as 'OUT_DIR' in all_directories table with same path as above.
    I hope i have cleared your doubts, can you please let me know where exactly i am going wrong in my earlier procedure.
    Regards,
    RR

  • HT5052 hi , i cant update mi ipod touch software, a soon as the download process in finished an error message appears

    hi , i cant update mi ipod touch software, a soon as the download process in finished an error message appears :" session time has expired" something like that

    Disabling the computer's security software during the download and update usually resolves a network timeout error.

  • TS4002 I bought iPad and I can not access, A message appears asking me account and password when i return to the person who I purchased it from him, he told me that he forgot the account and password I want a solution to the problem, because in this way I

    I bought iPad and I can not access, A message appears asking me account and password when i return to the person who I purchased it from him, he told me that he forgot the account and password
    I want a solution to the problem, because in this way I will not benefit from the iPad

    There is no solution.  You have to provide the ID and password.  There is no way around it.  If the person you bought it from can't provide it, return it and get your money back.

  • Output message can not be created in a PO

    Hi to you all,
    Output message can not be created in a PO for a customer. During my tests, the yellow output message was created automatically after I have saved the PO.
    I checked ME9F and the table NAST, there is no entry for the PO of the customer. This happens arbitrarily.
    Do you know how and why this can happen? Is it a program error or something else?
    Thanks.
    Esra

    Hi Esra,
    if I do understand you correctly, when creating the PO the system always finds a message to be created ("yellow" message). But arbitrarily the message cannot be generated in ME9F, correct?
    In my view, if the message is always determined correctly in the PO there cannot be any trouble concerning condition records, the error has to occur later in the process.
    Are there any error messages in the processing protocol of a message that cannot be created? What happens if you set the transmission time-spot to 4 (immediatelly)?
    Just my 2 cents
    Alicia

  • HT204053 When I try to login to my apple ID on my iphone 4 to use facetime, it will not work and tells me to check my connection?  I have even tried creating a new apple ID but the same message appears

    When I try to log onto my Apple ID to use facetime, it will not work and tells me to check my connection.  I have even tried creating a new apple ID but the same message appears.  I do not understand why this is happening, could anyone help me resolve this issue it is very frusterating that I can not enable facetime or imessage.

    I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

  • When i update to the latest version (7.0.3), there is a message appear to me when i open any application that contains notification such as (What'sApp or BBM),this message said (Connect to iTunes to use push Notification),How I can to stop these message?

    When i update to the latest version (7.0.3), there is a message appear to me when i open any application that contains notification such as (What'sApp or BBM) , this message said (Connect to iTunes to use push Notification) , How I can to stop these messages that appear to me constantly?

     Hi,
    One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
    I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
    Any idea how can this problem be solved?
    It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
    Thanks

Maybe you are looking for