Numerous "page not found" errors

I've been using a WRT160N router for several weeks which I bought as a replacement for a failed Belkin router. Home network config is my Vista PC connected via Ethernet cable to the router and my wife's Vista PC with wireless access to the router. The router is connected to a Cox ISP Motorola SB5120 Surfboard cable modem. Both computers (wired and wireless) experience frequent "page not found" errors. In many cases, an immediate attempt to access the same page is successful.
I'm quite sure that the network connection and the Internet connection are not being dropped. At the same time that the "page not found" errors are occurring, I am able to check my email (via Windows Mail) with no problem. Also, both computers are running Network Magic, and it is quite good at popping up messages when a connection is lost. These messages never pop up when the "page not found" errors are occurring.
I've done a fair amount of Googling about this problem and saw some references to Domain Name System failures. Is it possible that when I'm requesting a web page, my DNS server is not returning the page's IP address? If so, is there a way to correct this problem?
One additional piece of info that might be relevant: If my wife shuts down her computer in the evening before I shut mine down, then I immediately start getting many more "page not found" errors - sometimes on almost every attempt to access a page. I have been able to get around this problem by power cycling the router, leaving the power off for 20-30 seconds. After that, access to web pages is much better.
The last time I checked, I had the latest firmware installed in the router. This problem never occurred with the old Belkin router for almost two years before it began failing.
Any advice would be much appreciated. This problem is quite a nuisance.
--Jim--

Paul, thanks much for the link to the other thread. I just finished reading all 11 pages. Unbelievable that there hasn't been a single encouraging post by a Linksys person! I'm probably going to keep the router, since I've had it for almost a month and have discarded the box and packaging by now. Looks like I have a choice of (1) putting up with the DNS problems that are truly a nuisance, (2) downgrading to firmware version 8 if I can get it, or (3) hoping for a future firmware upgrade from Linksys that will fix the problem.
There seem to be a couple of people on the thread who are willing to provide firmware version 8 and save me the trouble of extracting the firmware file from the tar file. They say something like, "PM me your email address and I'll send you the firmware." I'm enough of a newbie on this board and a complete newbie on the other board that I'm not sure what PM means. Do you? Are both boards sponsored by Linksys? This one is part of forums.linksys.com while the other one is part of forums.linksysbycisco.com. There's so much to learn ...

Similar Messages

Page not found error getting while access endeca application

Hi All,
I am trying to create an application in endeca. Created application , ran neccessary scripts and created pages in experience manager.
but when i try to call the application in browser . i am getting page not found error. There are some other application which is created by copying discover electronics ,
which works fine. Please help me how can i resolve this issue. I am using endeca 3.1.0.
Thanks
Mark

There's not much to go on here, but it sounds like you're trying to view changes in a "live" application. To confirm this, you should execute the configuration promotion script and then check the same application URL. You can run the promote script from inside workbench. Log in as admin, then look under "Workbench Home > Administration > Admin Console > Scripts." You should execute the "PromoteAuthoringToLive" script. Once this script is complete, then test your page again.
If this works, then it means that your application is configured such that it doesn't get immediately notified of new configuration changes, i.e. it's configured in "live" mode.

Page not found error in webdynpro Application

Hi All,
While we are opening a links getting Page not found error. This is webdynpro ABAP application ,through Launch pad it is configured.
We have recently upgarded our portal , previously it was working fine.
R/3 is not upgraded .
Regards,
Krishna.

Hi Krishna,
Hope you are doing good.
Kindly run the web diag tool as outlined in note 1045019 or SAP Note No. 1332726 (depending on your version) and reproduce the issue.
This will give you the exact reason why the issue occurs. Attach it here if you have any issues.
Thank you!
Kind Regards,
Hemanth
SAP AGS

"Page not found" error while trying to run a page

Hello all,
I tried to run a page in JDeveloper(9.0.6.6_606) and after the browser page pops up, it is displaying "HTTP 404 : Page not found" error.
Please find the log below:
C:\jdevbin\jdk\bin\javaw.exe -ojvm -classpath C:\jdevbin\j2ee\home\oc4j.jar -mx256m -Dhttp.proxyHost=proxy -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=10.200.152.236|localhost -Xverify:none com.evermind.server.OC4JServer -config C:\jdevhome\jdev\system9.0.3.1.1107\oc4j-config\server.xml
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
[waiting for the server to complete its initialization...]
Embedded OC4J startup time: 7047 ms.
Oracle9iAS (9.0.3.0.0) Containers for J2EE initialized
Embedded OC4J startup time: 16 ms.
Target URL -- http://10.200.152.236:8988/OA_HTML/runregion.jsp?page=%2Foracle%2Fapps%2Fpos%2Faccount%2Fwebui%2FNonPoInvCreatePG&akAppShortName=POS&akDbcFile=FIN1DEV2&akDevMode=1&akDiag=1&akPassword=pwd4dev2&akRespKey=ISUPPLIER_PORTAL_RESP&akUsername=dpsdx48&JRAD_XML_PATH=C%3A%5Cjdevhome%5Cjdev%5Cmyclasses%5CJRADXML%5C&JRADStartTime=1152606872484
ApplicationServer: appName = bc4j
ApplicationServer: appName = current-workspace-app
ApplicationServer: appName = soap
Error creating the ORB :
Starting an OA Core session ...
ICX DIAGNOSTIC: application_id = 177
ICX DIAGNOSTIC: responsibility_id = 23075
ICX DIAGNOSTIC: security_group_id = 0
ICX DIAGNOSTIC: APPS Web agent = http://app-fin1dev2.albertsons.com:15160/pls/FIN1DEV2/
FIN1DEV2=C384A6C2A84C8E63FAA51365BA91681A;path=/;domain=.albertsons.com
ICX DIAGNOSTIC: mCookieHeader = FIN1DEV2=C384A6C2A84C8E63FAA51365BA91681A;path=/;domain=.albertsons.com
ICX_DIAGNOSTIC: mEncryptedSessionID = C384A6C2A84C8E63FAA51365BA91681A
ICX_DIAGNOSTIC: mSessionID = 687703439
TIME: runregion.sessionBean.createSession [87296 ms]
ICX_DIAGNOSTIC: mTransactionID = 78453
ICX_DIAGNOSTIC: encryptedTransactionID = C974A13EBB894B23
TIME: runregion.sessionBean.createTransaction [9672 ms]
TIME: runregion.rest [0 ms]
Is there anything you think I am missing in the configurations?
Kindly help.

I am also using OA Framework Jdeveloper....for ADF BC development.. Please find the log below:-
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\config>
E:\jdeveloper\jdevbin\jdk\bin\javaw.exe -client -classpath E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar;E:\jdeveloper\jdevbin\jdev\lib\jdev-oc4j-embedded.jar
-Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true
-Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config
E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
Oct 18, 2007 11:56:47 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Oct 18, 2007 11:56:47 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
WARNING: Code-source E:\jdeveloper\jdevbin\jdev\appslibrt\xml.jar (from <library> in
/E:/jdeveloper/jdevhome/jdev/system/oracle.j2ee.10.1.3.39.81/embedded-oc4j/config/application.xml) has the same filename but is not identical to
/E:/jdeveloper/jdevbin/lib/xml.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar). If it
contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader default.root:0.0.0.
WARNING: Code-source E:\jdeveloper\jdevbin\jdev\appslibrt\jazn.jar (from <library> in
/E:/jdeveloper/jdevhome/jdev/system/oracle.j2ee.10.1.3.39.81/embedded-oc4j/config/application.xml) has the same filename but is not identical to
/E:/jdeveloper/jdevbin/j2ee/home/jazn.jar (from <code-source> in META-INF/boot.xml in E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar). If it contains different
versions of the same classes, it will be masked as the latter is already visible in the search path of loader default.root:0.0.0.
WARNING: Code-source E:\jdeveloper\jdevbin\jdev\appslibrt\jazncore.jar (from manifest of /E:/jdeveloper/jdevbin/jdev/appslibrt/jazn.jar) has the same
filename but is not identical to /E:/jdeveloper/jdevbin/j2ee/home/jazncore.jar (from <code-source> in META-INF/boot.xml in
E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the
search path of loader default.root:0.0.0.
WARNING: Code-source E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib\uix2.jar (from
WEB-INF/lib/ directory in E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib) has the same
filename but is not identical to /E:/jdeveloper/jdevbin/jdev/appslibrt/uix2.jar (from <library> in
/E:/jdeveloper/jdevhome/jdev/system/oracle.j2ee.10.1.3.39.81/embedded-oc4j/config/application.xml). If it contains different versions of the same classes, it
will be masked as the latter is already visible in the search path of loader datatags.web.webapp:0.0.0.
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 19594 ms.
Target URL--- http://hydhtcl33997.ad.infosys.com:8988/SRTutorialADFBC-UserInterface-context-root/faces/app/SRList.jspx
07/10/18 11:56:56 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized

Page not found error when navigating in Iview application

Hi,
I have developed an application,and I am able to view a sucessfull preview of the Page as well.There are htmlb links on the page.When clicked,they navigate to the next jsp page.This iview was assigned to a user,and the portal was logged in though a local ip address.The application works fine.
In trying to access the portal though an external Url,the initial page comes up perfectly fine.However the next page,does not come up,when a link on the first page is clicked.I get initially a popup with the message:
"This page contains both Secure and Non secure Items
.Do you want to display the non secure Items."
The options on the Popup were yes,no,More Info.
When I clicked yes then I get the display page not found error.The error is:
" The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable. "
The Information I get when I click on More Info is-
Downloading non-secure content from a secure Web site
The Web site you are viewing is a secure site. It uses a security protocol such as SSL (Secure Sockets Layer) or PCT (Private Communications Technology) to secure the information you send and receive.
When sites use a security protocol, information that you provide, such as your name or credit-card number, is encrypted so that other people cant read it. However, this Web page also contains items that do not use this secure protocol.
Given what you know about this Web site and your computer, you must decide whether to continue working with this site.
If you do not feel confident about working with this site, click No. "
This problem occurs only to a particular user.If I add the role to another user,and view the iview I am able to navigate without problem(there is no popup as well).Even for this User,it is happening only when,I access through extrenal url,not when I access the portal through the local IP Address.
Regards,
Harish

Hi,
This is a further Update.The problem described above has something to do with the roles.When some roles(cusom) are assigned the navigation occurs.Can you please let me know if there is any role related configuration with SSL.
Regards,
Harish

With 3.6.12, Help menu item "For Internet Explorer Users" results in a "Page Not Found" error. Is this a known bug? Is it being addressed?

Clicking the 3.6.12 Help menu item "For Internet Explorers" item results in a "Page Not Found" error.
The URL of the resultant page is https://support.mozilla.com/en-US/kb/Windows%20start%20page?as=u
Is this a known bug, if so, is it being addressed? If so, someone needs to work faster.
If it is not a known bug, someone needs to get right on it - you want people to switch to Firefox and then there is this bug -- not a good way to impress Internet Explorer users.

Hi Claudio Roca,
I have encountered the same problem. Do you found the solution for this issue? I will much appreciated if you willing to share your solution and email to [email protected] Thank you so much.
Regards,
Hau Chee

Csv output feature results in a "page not found" error in IE (ver 8)

Has anyone else had issues with the csv output feature returning a "404 page not found" error when using IE version 8.0?

Hello. I'm getting an Http 404 The webpage cannot be found" error when trying to export any APEX application's query results into Excel (Application Express 3.2.1.00.10). This was working fine before. Nothing changed with our APEX application. I've been always using I.E. Version 7.0.5730.11 with no problems. I've reset the I.E. defaults and still the problem exists. I've downloaded Mozilla Firefox and the problem does not happen. However, I would like to know why my I.E. still gets this error? Any feedback or suggestions would greatly be appreciated. Thanks for your time.

"Page not found" error after 5 minutes of see "processing" on the screen

We are using WebLogic 8.1 server and also the WebLogic proxy as our front end. When a user runs a process that takes over 5 minutes using the Proxy URL they receive an IE "Page not found" error after 5 minutes of seeing "processing" on the screen. If they run it on none Proxy URL (directly on WebLogic server) it works fine.
We have looked into the WLIOTimeoutSecs parameter and set in the web.xml for both the HttpClusterServlet and HttpProxyServlet, but this had no affect.
Is there another timeout that controls this 5 minute timeout? It seems if one uses Apache and sets the WLIOTimeoutSecs parameter to a higher number than 300 seconds there is not an issue.
Did this parameter get omitted for the WebLogic Proxy and if so, what does one use?
Thanks,
Jim

Hello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
Kernel parameter: rdisp/gui_auto_logout
Kernel parameter: rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

Page not found error

Hello,
we have in our portal a home page with three iviews. Every iview includes a html-document from KM-repository.
The iviews are included in a page and the page is included in a workset. In the first navigation level there is an entry called Home and in the second navigation level also.
If we log in to our portal we can see this three iviews on our home page. But if we navigate in the portal to another navigation entry and then back to Home the all three iviews show an page not found error (HTTP 400). If we refresh the complete portal we see the three iviews correct.
Why do we get an error if we navigate to Home and not when the complete portal is refreshed?
Regards
Philipp

Hi,
Are you clicking the back button of IE or clicking the Home Link in the portal?
If you are clicking the Back Button and you get the no page found error, this behaviour is normal. If you want to use Back button you have to go for Light frame work page.
If you are clicking Home link and still you get the errors then i suspect with respect to caching of the iviews. Try changing the cache properties of the iviews.
Thanks,
Regards,
Aditya Metukul.

RRI to ABAP report - Page not found error

Hello,
I am trying to setup a Jump from Query to an ABAP report to display long text at line item - when I do this from Web, it tries to open but ends up with a "Page not found" error. The page title bar says Bex Launacher ( RRI transactions)
We are on BI 7.0 SP10 and I have tested SICF's Webgui service, this seems to works fine ( calls SAP gui in HTML)
I tested in RSRT and it works fine. Just doesn't work from the report in Web Browser ( Go to-> program name)
Any ideas?
Dev

Any ideas ?

Csv expoort - Page not found error

We have a problem with one of our employees in a satellite office -
She can access all of our apex reports without difficulty, but every time she clicks on a csv export link, she gets a page not found error. She sent me the link, and it works fine for me. Also, others in the same office have no problems.
She is on IE6 on XP pro.
Anyone have any ideas?
TIA
John

Hi,
Please check the log file to find more information about this issue. The path of the log file is:
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
In addition, please make sure the URL of the site is correct.
Please check whether you could access other pages in the problematic site.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Integration Directory : getting 404 Page not found error while accessing In

Hello,
When i am trying to open the Interation Directory, it is showing me 404 Page not found Error.
Some Description
- Executing sxmb_ifr,
- From http://erpsys07:50300/rep/start/index.jsp,i am getting mentioned error when i am trying to access Integration Directory from URL.
erpsys07 -> Central SLD -> J2ee Port - 50100
erpsys07 -> PI system -> J2ee Port - 50300
When i am clicking on integration directory link, it is pointing to Central SLD J2ee Port (50100) instead of 50300, it is pointing to
http://erpsys07:50100/dir/start/sso/Directory.jsp instead of http://erpsys0750300/dir/start/sso/Directory.jsp.
Could some help me where to change and what to change?
Thanks,
V.SINGH

Have you checked port in Netweaver Administration?
See which port is mentioned there. (If you are using PI 7.1)
Check in SXMB_ADM transaction, and in your RFC Destination, where it is pointing.
Thanks,
Hetal
Edited by: hetal shah on Nov 24, 2009 4:49 PM

Page not found errors

I am stuck with the following error "page not found" when i click on my link. I am trying to use the cgicmd.dat.
In the .dat file:
report: server=Rep60.sony.com userid=#####/#####@dwhs report=%1 %*
In the HTML code:
href="http://sddb5.station.sony.com/dev60gci/rwcgi60.exe/report?by_day.RDF&reptype=hrts_unique_users&destype=cache&desformat=HTML"
Again when i click on the link i get page not found errors. ANy clues?
null

<BLOCKQUOTE>quote:<HR>Originally posted by the oracle reports team:
hello,
did you try to specify the whole URL for testing ... without using the cgicmd.dat ?
and i hope the part in the URL .../dev60gci/rw... is just a typo in this message ;-) it should say .../dev60cgi/...
regards,
the oracle reports team<HR></BLOCKQUOTE>
Yes it is working when i pass the whole thing throught the html string. What i am trying to avoid is the db autho betting passed. I would like to require none what so ever and let the Apache Server do that bidding. But i understand that i have to use the .dat file and i can't make it work for me.
null

Report export (CSV) results in page not found error

Hello,
I'm having this strange error which i cannot seem to figure out. I have enabled report export through CSV in a report (report attributes). When i click the link in the report i get a page not found error (http 404). At first i thought it was a problem with the http-server. But as other applications (on different databases) don't have this problem i'm thinking it has to do with this apex-instance. Till 2 days ago it did work on this instance too.
I'm really out of ideas, so if anyone can push me in the right direction i would really appreciate!
Apex 3.2
DB 10.2.0.4
Thanks,
Patrick

Does this compare to the same as the url for your page?
Has your server changed?
Have you changed the dad file recently?
have you checked the Apache access/error logs right after the 404 error is encountered ?
Gus..

HTTP 404 page not found error !! on tabs

Hello All,
I am having a page with multiple tabs . When the user navigates from one tab to another tab ( using standard tab set ) from interactive report I am getting the HTTP 404 page not found error .
The tabs are in the following fashion.
home page#1
varlist page#2
criteria page#7
dynamic report page#10
interactive report page#15
I can move forward by selecting the tabs but when i am in interactive report tab and select any of the other tabs i am getting HTTP 404 page not found error..
Can any one help me .
thanks/kumar
Edited by: kumar73 on May 5, 2010 2:45 PM
Edited by: kumar73 on May 5, 2010 2:46 PM

Hello Jarola / All,
Selected Pseudo Parent Tab: TS1
Select Standard Tabs: DBTable, variables , condition , Report , interactive report.
When I am navigating from tab interactive report to any other tab the url is chaning to
http://cosmo:8080/apex/wwv_flow.accept - resulting in HTTP 404 page not found error ..
but when navigating with in the following tabs
DBTable page#1
variables page#2
condition page#7
report page#10
I am having different url like example -
http://cosmo:8080/apex/f?p=125:7:1075354762414252::NO
Can any one tell me why i am unable to navigate from interactive tab to other tabs ..
================================
I uploaded the applicatoin in oracle.apex.com
http://apex.oracle.com/pls/apex/f?p=29558:1:3623891857047276:::::
please find the link above .
===================
The database tables are huge and inorder for me to replicate at oracl.apex.com I got to load the full schema which is not possible . May be you can go through the code to understand whats going wrong.
thanks/kumar
Edited by: kumar73 on May 6, 2010 6:46 AM
Edited by: kumar73 on May 6, 2010 1:00 PM
Edited by: kumar73 on May 6, 2010 1:01 PM
Edited by: kumar73 on May 6, 2010 1:04 PM
Edited by: kumar73 on May 6, 2010 2:46 PM

Numerous "page not found" errors

Similar Messages

Maybe you are looking for