Numlock behaving oddly when using external numeric keypad

Hi guys, I have a user who's num-lock toggles between on and off with every key stroke when typing on her external numeric keypad. We have switched out her pad 3 times and made sure the keypads worked in the Dells we have at other stations. Any idea why this maybe happening?

It works for me on 10g but the only pitfall is the " * ", the workaround is to use the " & " in the label next to the key you want.
for example:
Button*   label &*
Button-   label   &-
Button/   label   &/
Button+   label   &+
Button.   label   &.Try it
Tony

Similar Messages

Trackpad behaves oddly when firewire is used

All of a sudden my trackpad start to behave oddly when I have a firewire device connected. Specifically a MOTU Ultralite mk3 hybrid paired with a MOTU ultralite mk3 firewire. The problem started yesterday when I launch Logic Pro X. a minutes after the trackpad starts to be unresponsive and the pointer moving in wrong direction or jumping.
I tried to reset the PRAM with no luck. Even worst, when I tried to boot the macbook pro after rebooting the system freezes on the logo screen when the firewire port is used with that device. when I disconnect the firewire port the problem totally goes away.

RE: Crash Report
http://discussions.apple.com/message.jspa?messageID=2972949#2972949
RE: Guiness (nee Harpoon) Solution
Perhaps it is now time for the Harpoon solution (aka the Guinness solution in the mid and far west)
for those not in the know:
1. turn everything off.
2. unplug firewire cables
3. unplug power cords
4. get up from well worn chair
5. walk to refrigerator
6. open refrigerator
7. remove bottle of Harpoon (Guinness, local micro brew, etc)
8. pop cap
9. pour into glass ( you AREN'T going to drink it from a bottle, are you?)
10. sip responsibly. enjoy the moment. think pure thoughts
11. return to kitchen. If less than 15 minutes has elapsed, have another. Otherwise, retrurn to edit room.
12. Plug everything back together
12. fire up external monitors, VTR, external hard drives & computer in that order.
Does it work now? If yes, congratulate your self. If not, oh well, but at least you are in a much better frame of mind to begin some serious troubleshooting.
cheerios,
x

ORA-15072 when using external redenacy?

Hello -
I am getting ORA-15072 (command required at least one failure groups) when using external redundancy. I am using asmlib on Linux, and I have a feeling that it it a multipathing issue. Here are the output from some of my commands:
[root@ctolinuxpoc01 init.d]# ./oracleasm listdisks
VOL1
VOL10
VOL11
VOL12
VOL2
VOL3
VOL4
VOL5
VOL6
VOL7
VOL8
VOL9
SQL> select name, path, state from v$asm_disk;
NAME
PATH
STATE
ORCL:VOL1
NORMAL
ORCL:VOL2
NORMAL
NAME
PATH
STATE
ORCL:VOL3
NORMAL
ORCL:VOL4
NAME
PATH
STATE
NORMAL
Why would I be getting ORA-15072 with external redundancy (using asmlib)?
Thanks in andvance!
Mike

The header status is showing as "unknown"... Could this be part of the issue?
Thanks,
Mike

When using external speakers, they won't unmute

I am using a U530 Touch with Realtek HD Audio driver version 6.0.1.7535 and Windows 10 build 10240. When using external speakers, everything works fine, except when I mute speakers they will not unmute without unplugging the 3.5 mm speaker jack and plugging it back in to the unit. Using the laptop's internal speakers does not produce the same proplem (mute/unmute works fine). I have looked at every setting and find nothing, nor have I seen this problem reported in the forums. HELP!!!

Rattle Snake wrote:
Firstly how do I know if this is a 1st or 2nd generation shuffle? Bought in May at Palo Alto Store but there doesn't seem to be anything on the packaging to tell me.
1st Gen shuffle was white, plastic, and shaped like a chewing gum package.
2nd Gen shuffle is aluminum, with a spring clip on the back and comes in silve and assorted colors...
When the shuffle is connected to the external speakers(bought at the same
time) it only plays about 5 songs and then stops.
Does it play through the earphones after this happens? Does it still have power or is the battery depleted after it stops playing?
What Brand & model are the speakers?

How do I get PowerBook G4 with Tiger to identify external Numeric Keypad?

I just bought a Travel Solutions Portable Numeric Keypad Model 60-320, which says on the packaging System Requirements: Windows 98, 2000, Me,XP or Mac OS.
The Installation instructions say:
Connect the USB cable of the Numeric Keypad to the USB port on your computer. Your computer will automatically read the keypad. You are now ready to use.
I have Mac OS X 10.4.7
When I plug the Keypad in the Keyboard Setup Assistant opens, with Introduction: Your keyboard cannot be identified and will not be usable until it is identified. To identify this keyboard click Continue.
On clicking Continue, one is required to press the key immediately to the right of the Shift key on the left side of the external keyboard.
It apparently did not occur to whoever wrote this Setup Assistant that people are more likely to want to plug in numeric keypads rather than full keyboards, and that numeric keypads do not have Shift keys!
How do I get the computer to identify the Keypad?
PowerBook G4 Mac OS X (10.4.7) 15"

Welcome to the Discussions!
I cannot answer your question, but maybe you can return the keypad you bought and get the Kensington keypad/calculator <http://www.amazon.com/gp/product/B00009L1XO/102-7465461-6085726?v=glance&n=172 282>, which works fine with my PB G4.
bd

How to blank laptop screen when using external monitor/

Hi there
I need some help with figuring out how to configure my xorg.conf for my Arch Linux 64 bit installation on a HP Pavilion dv 5000 laptop so that I can automatically blank my laptop screen when using an external monitor. I have Arch Linux installed along with Ubuntu Feisty. In Ubuntu my external monitor (Viewsonic 1912WB) was not detected at the time of installation but with the native 1280X800 resolution that is good for the laptop takes effect for the external monitor automatically when the external monitor is plugged in. The laptop monitor goes blank when the external monitor is plugged in.
In my Arch Linux installation I have not been able to configure a dual head configuration using the ATI Radeon drivers (fglrx). I have the native 1280X800 resolution set up for the laptop monitor and this resolution takes effect for the external monitor also. However the laptop monitor also continues to function when the external monitor is plugged in. I would like to blank the laptop monitor when using the external monitor.
I am attaching my Arch Linux xorg.conf and the Ubuntu xorg.conf below. Thanks for anyone who can help, I am having a lot of difficulty in figuring out how to set up xorg.conf among all the things that I have had to learn so far in Linux and I am a relative newcomer to the whole thing. I have tried to compare the two xorg.conf files and edit my Arch xorg.conf in accordance with the Ubuntu one but it did not work and I keep getting errors!
I am using XFCE as my Desktop environment.
Arch Linux xorg.conf
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# Files section. This allows default font and rgb paths to be set
# Server flags section.
# Input devices
# Core keyboard's InputDevice section
# Core Pointer's InputDevice section
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option    "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option    "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option    "XkbRules" "xorg"
Option    "XkbModel" "pc104"
Option    "XkbLayout" "us"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option    "Protocol" "Auto" # Auto detect
Option    "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
Option    "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 30.0 - 62.0
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option    "VendorName" "ATI Proprietary Driver"
Option    "ModelName" "Generic Autodetecting Monitor"
Option    "DPMS" "true"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "* Generic VESA compatible"
Driver "vesa"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "* Generic VESA compatible"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Ubuntu xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Driver "ati"
BusID "PCI:1:5:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection

Xrandr 1.2 provides means for this. But today the only supported configuration is xorg-server-1.3 + xf86-video-intel-2.0. So for Radeon you'll have to wait for drivers that support Randr 1.2.
On my laptop (Thinkpad x60s) that would be:
xrandr --output VGA --auto
xrandr --output LVDS --off

Empty report returned from WEBI and Crystal report when using external hier

Hi,
WEBI and Crystal report build from BEX query returned empty report when we used external hierarchy 0PROFIT_CTR. In BEX we don't have any problems with it.
No authority check is perfomed on the hierarchy when we start the report in WEBI/Crystal. Only check on the hierarchy is performed when the root authorization is assigned to the user

We using BO4 SP12

How to remove namespaces in mapping when using External Definition

Hi,
I read in the blog (/people/sameer.shadab/blog/2005/12/05/how-to-remove-namespaces-in-mapping--xi) that you are able to remove namespaces in mapping by deleting the value from XML Namespace under the Message Type. However, is it possible to do this when you are using External Definition (xsd) ? The blog only describe how to do this if you define a Data Type.

Hi ,
No ..it is not possible to remove the namespace once you imported into IR of external defintion.You can remove your namesapce from external definition before importing into IR.
Sekhar

Kernel_task high cpu usage when using external monitor at 1080p

Specs
Model Name:          MacBook Pro
Model Identifier:          MacBookPro6,2
Processor Name:          Intel Core i7
Processor Speed:          2.66 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per core):          256 KB
L3 Cache:          4 MB
Memory:          4 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          MBP61.0057.B0C
SMC Version (system):          1.58f15
My external display is a Samsung PX2370 connected to my MBP using an HDMI cable with a HDMI-to-miniDP adapter
I first noticed this after the last EFI update several months back. At first I thought kernel_task eats up too much cpu cycles whenever an external display is attached, but it turns out this only happens when the external display is set to 1080p. When external display is set to 720p, kernel_task is pretty much normal (~5% cpu usage) but rises up to ~150% cpu usage once the external display is set to 1080p.
kernel_task cpu usage is also with normal range when my MBP is connected to a Samsung LCD TV at 720p.
Anyone having the same problem or know of any fix/workarounds?

Seems like the problem persists when playing a 720p video on the external display set to 720p. To sum it up
Video Resolution
Main Display
External (1280x720)
External (1920x1080)
480p
ok
fluctuating kernel_task cpu usage (~5 to ~150 cpu usage)
high kernel_task cpu usage
720p
ok
high kernel_task cpu usage
high kernel_task cpu usage
1080p
ok
high kernel_task cpu usage
high kernel_task cpu usage

Desktop acting weird when using External Monitor.

Hey guys,
Just wondering if people have been having this weird "problem" when using an external monitor on OS X Mavericks. Though not really an issue that makes the OS/Mac usable, it's more of a quality of life thing (and it's really annoying for someone who likes things to be where I put them).
Anyways, the problem is that when I use my external monitor when at home, I have it set as the main display while the monitor on my MacBook Pro 15" acts as the extended/secondary monitor. No problems in functionality, BUT, the icons on my desktop always move while my external monitor is in use.
I usually do my work while using my external monitor and I use my desktop as my initial location to save my work files before moving them to an appropriate folder. However, revert back to not using the external monitor, everything just gets muddled up on top of eachother, stuff (sometimes) get missplaced and it just becomes a hassle to rearrange my desktop to how it was before.
tl:dr: desktop icons move when I use my external monitor as my main display.
So does anyone know if this is a problem that can be fixed, or is it an issue my monitor being a 3rd party model and old?
(Monitor HP w2448h — http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?ac .admitted=1391518927628.876444892.199480143&javax.portlet.begCacheTok=com.vignet te.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.pr p_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c01 482166-8%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d78 2fcbb0710b053ce01&sp4ts.oid=3454237)

Hi BradnBeaverton,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Whether or not you are using an Apple Cinema Display, the behaviour you are describing is the same:
Apple Cinema Display: Troubleshooting steps
http://support.apple.com/kb/HT2810
Desktop icons move after screen resolution change
Changing the screen resolution affects the display of information on your screen, especially changing to a smaller resolution. The operating system may automatically reposition icons after you change the screen resolution.
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Cheers,
- Judy

Noise when using external monitor

When I connect my MacBook Pro to an external LCD screen and also connect my soundoutput to an external amplifier I get noise in the speakers. What can I do to avoid this?
It gets even worse when using powercord on my MacBook.

this is caused by processor noise/power interference. one fix is to turn the volume all the way up on the macbook pro,and adjust volume on the amplifier.

Macbook Pro 15 Late 11 extreme fans noise when using external monitor

Dear Apple, recently I bought Macbook Pro 15 Late 11. I really love it's speed and new OS X Lion, BUT this Macbook really noisy when I use external monitor and keyboard. I work on external monitor all the time. I don't care about how hot my Macbook is when I'm on external monitor. Let it just be hot and quiet.
P.S. Example. I run Ableton Live and have 6200 RPM working on external monitor (awfully loud!). CPU 90% idle. When I switch off external monitor and use internal one, RPM drops down to 4500 with the same Ableton work session. By the way, I don't need cool graphic card. Apple, let our work days be quiet.

I did that and it didn't help. It's common problem with an external monitor. Here are some links:
http://forums.macrumors.com/showthread.php?t=1162550
http://www.ivy-rose.co.uk/Articles/Macbook-Pro-Cooling-Issues

When using external-scheme what is still stored on-heap?

Hi all,
If I have a scheme like this...
<distributed-scheme>
    <scheme-name>distributed-scheme</scheme-name>
    <service-name>TestDistributedService</service-name>
    <backing-map-scheme>
      <external-scheme>
        <lh-file-manager>
          <directory>/temp/odc-data</directory>
        </lh-file-manager>
      </external-scheme>
    </backing-map-scheme>
</distributed-scheme>...when I put data into a cache what is still stored on the heap?
When I do a test I can see that obviously the data is not on the heap as I can add massively more entries before I run out of memory.
Using the VisualVM tool's memory sampler I can see a similar number of instances of com.tangosol.util.Binary as I have entries - so are they keys still on the heap?
If I add indexes then I can see that these are on the heap, so I will have keys and indexed values on the heap. I end up with twice as many instances of Binary as I have put entries, which makes sense as the index contains a references to the Binary keys.
The reason I ask is because I configured a "Dev" version of our application that uses <external-scheme> everywhere you would normaly use a <local-scheme> so we can run a version of our application for Dev testing on development machines with limited RAM. It needed a few tweaks and a custom DefaultConfigurableCacheFactory but seems to work fine. I am now trying to figure out just how much space we save and how much "data" is still on the heap.
Cheers,
JK

Thanks David.
So with an external scheme we will be able to save the amount of space taken by the cache values. Now if I could just shift the indexes (which take quite a bit of space) that would be a bonus. I know it sort of defeats the point of having an index but I am trying to run the app on a small Dev server so I am more interested that it works functionally than how fast it is. If the app was 3.6 I might be able to do something clever with custom indexes - then again we could just remove the indexes.
Cheers,
JK

Firewire Problem When Using External Burner

Before I go into detail about my problem let me say that I contacted the manufacturers CS and they were unable to help (sent a new burner and I still had the same problem).
I finally got an external DVD burner, the lacie d2 with Lightscribe, and I plugged it in the firewire port, updated it with all the latest drivers and tried burning some cd's from an iTunes (7.1) playlist. It checked the media, started to burn the first song and and immediately went to finishing the disc burning without going through the other songs. But then it just hung there (the player started running, I could hear it, but when it froze after the 1st song he player just quieted down). I left it alone for awhile figuring it would eject the disc but nothing happened. I was unable to stop the process, quit iTunes or even eject the disc. Eventually I had to force quit and restart the computer.
I tried it using Toast but I got an error the first time and the second time I tried it froze on the burn screen. The funny thing is I'm able to burn when using the usb connection (it's really slow though, 1.0) and I'm able to rip cd's when connected via friewire but burning causes all types of problems.
The burner shows up on the system profile (vendor supported after updating with drivers), I've switched firewire cables, and used both ports on the iMac and the dvd burner, and after contacting Lacie they sent me a second burner but the problem persisted. I use a lacie external hard drive and never had a problem with it so I was wondering if anyone had an explanation or a similar problem. If not I was thinking of sending this second one back and trying the new Sony firewire dvd burners.
And one last thing, I got this because my superdrive gave up on me, although it's still recognized in the system profiler, it just doesn't start up if I put in a cd or dvd.
Please help as I'm at the end of my rope with this burner.
iMac G4 Flat Screen Mac OS X (10.4.9)

I'm curious if the internal superdrive's inaccessibility to the system and
the firewire port issues are related; or share a common thread in how
they may require one action to try and make them work.
Aside from that speculation, have you tried seeing what the Apple
Hardware Test (boot the computer from it) says in regard to this
matter and the details of any error codes it may generate? And
if you can run Disk Utility from the installer OSX disc#1 from the
external FireWire disc drive, to see if any maintenance can help
the system, that would be nice.
There also are third-party freeware disc burn utilities; and a few share-
ware ones that are quite good. They usually will work in problematic
situations where the hardware is OK and the basic OS X is, too; but
for some reason the external FW or internal replacement Superdrive
won't burn a disc or does it partially; or improperly. I've used my disc
burners so rarely I am not a great one to improvise here; but I did get
Burn 1.7u (v12) http://burn-osx.sourceforge.net and it does work well.
Can you boot the computer from any of the DVD - Firewire external
recorder/players you have or had? You should be able to boot the OSX
from the installer disc#1 from a good external; but some may not do it.
Was there any issue in the procedures you described before upgrading
the system to 10.4.9? How about Quicktime 7.1.5 or iTunes 7.1.1?

Why does "Link Media" behave differently when used as a keyboard shortcut vs when right clicked???

Not sure whether anyone else is encountering this, but the "Link Media" command behaves differently when right clicked as opposed to when used as a keyboard shortcut.
When you right click to select that option for an offline file, you get only the corresponding disconnected source media. But when you execute "Link Media" via a keyboard shortcut, PP brings up a huge list of all other offline media. Why does it only do that when you use the keyboard shortcut for "Link Media" but not when you right click "Link Media".
I'd like to get the Link Media command to behave via the keyboard shortcut the same way it behaves when right clicked. I don't want to have to deal with relinking a hundred other files, but just the single offline file I'm working on.

Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

Numlock behaving oddly when using external numeric keypad

Similar Messages

Maybe you are looking for