Numpad 789 and 123 not working in Quick Apply[ctrl+enter] window. [CC2014.1]

Hi guys,
We recently switched to CC2014 from CS5.5 and one of the feature we had been using a lot before was the Quick Apply window. However when we want to use the Quick Apply feature in CC2014.1 with the numpad, the numbers 789 and 123 don't work, while 456 work without problem. Our style name has numbers in them and it's super practical to have the numpad and Quick Apply working together at 100%.
Can anyone shed some light on this problem?
Thanks you.

you might have already tried this – but try is resetting the InDesign preferences on the workstation that is having issues. (Press Ctrl+Shift+Alt on startup).
I haven't but I just tried and it didn't fix it.
remove any third party plug-ins you might have installed in InDesign as well.
The Only 3rd party plug-in we use is Math Magic, I have just removed it, reset the preferences and it still don't work.
Is there a chance you are able to update the version of InDesign CC you are running to the latest release build 11.0.0.22? (2014.1.0 Release), and repeat the tests in that?
I think at this point it seems to be the only solution left and to cross our finger this will work, but updating PC's is a little tricky because it needs to go through IT software packaging and those affected PC are off the grid in a secret environment.
when you create a new InDesign document and import the styles from the 'problem' document (Paragraph Styles panel menu: Load All Styles), are you able replicate the issue in the new document?
New document, with or without our styles have the same behavior.
when you create a new document in InDesign and add a few new styles with numbers, can you replicate the issue?
You know in the quick apply you can type anything and normally even if you don't have a style with the entered character it will be inserted in the search box, but we don't get to this point with the 7,8,9 and 1,2,3 from the numpad.
Is this an issue you can replicate on other computers / keyboards in the company?
Actually they are not laptop, Dell also sell desktop PC. My computer is an HP Laptop with an external keyboard and I have the same issue they are describing me.
I wish I could test at my end for you, but unfortunately I only work on laptop-keyboards hopefully someone else out there is willing to test for you – so we know if it's an issue that can be replicated.
So on your end when you go to the quick apply window (ctrl+enter) and use the numpad key 7,8,9 and 1,2,3 you see them been displayed in the search box?

Similar Messages

PSE11 Why does Sharpening not work in Quick or Guided Mode?

I have used PSE 5 happily and greatly liked the auto sharpen feature. I have been forced to upgrade to PSE 11 due to Windows 8 incompatibility with 5.
I am appalled to find that the sharpen feature, including auto, does not work in Quick or Guided modes. The small previews in Quick mode show the correct sharpening effect but clicking on them or using the slider does not transfer to the main image. I either have to go into full unsharp mask, which I hate for quick fixes, or use the 'adjust sharpness' option under 'filter' in Quick or Guided Mode, which increases sharpness by an unspecified amount on each click.
Surely there si something wrong here. The feature is there so why doesn't it work?
Any ideas would be welcome. If it isn't fixable I shall want a refund based on the product not being fit for purpose.
Thanks
dlgoodyear

Thanks for confirming that it should work ok. I've now done the obvious and uninstalled/reinstalled and it's fine now.
Dave

Wireless network and bluetooth not working on touchsmart 600

This has not worked since day 1 and I have been using wired internet.
I really need to setup a home network and need to use wireless.
Research on the net has led me to belive I should have HP WIRELESS ASSISTANT on my machine... is that correct?
Everytime I try to download it is seem to be for a notepad... mine is a touchsmart desktop...
Please advise

Hi coffee12345,
Welcome to the HP Forums!
I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
What is the Product and Model Number of your desktop?
What version of Windows are you using?
Is this a recent issue, or has it been like this since day one?
Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
Please re-post with the necessary information, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

My Ipod touch 4th generation is not working, its frozen, ive tried everything and its not working, its just frozen on an app and i really really need HELP!!!

My Ipod is frozen!!! Its a 4th generation and its frozen on an app, Ive tried everything like holding down the lock screen and stuff and its not showing the red thing to slid to shut it down....This is my only thing to use to contact my friends and its not working, i dont have a phone and i cant get one, so this is the onlything i have.....PLEASE HELP!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

You should copy everything from your old comptuer to your new one.

Keyboard and Trackpad Not Working; Mac OSX Unexpectedly Quit?

Hey everyone... I think I may need to stop by the Apple store to figure this one out, but I just wanted to make sure if there was anything I could do on my own first.
So basically, on my MacBook Pro that I got nearly two years ago (late September of 2006) for the past month and a half has had problems. In the beginning, the mouse and keyboard would freeze up and just not work. Restarting the comp did nothing. Some times were worse than others (once it was frozen for 1.5 hours). Then it stopped, every now and then having a few freezes (sometimes when the keyboard froze but the trackpad was still good), but two days ago I had my comp not hooked up to an adapter. When the battery got low, the comp froze. I went to bed and closed the laptop, and the next day it was still frozen. I unfroze it, but then it happened again (I'm pretty sure the same situation... almost no battery)... and it is still frozen, even after multiple restarts.
Also, during the time when freezes weren't as bad, sometimes the keyboard would get stuck on one key, usually the volume up button (very annoying)... then I was told to restart the comp. When I came back, I was told that Mac OS X had unexpectedly quit.
Sorry that was a lot to read, but any help is really appreciated! Thanks!
Not sure if this is also important, but I did spill some water on the keyboard a very long time ago (late December '06)... it wouldn't take this long for that to cause the problem, would it?

Does booting up in [Safe Mode|http://support.apple.com/kb/HT1455?viewlocale=en_US] help at all? This boot mode checks the disk on startup and disables non-apple start up items and certain kernel extensions.
Steve

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

Hi i have a ipod touch 4 generation 64gb and my camera is blocked and dose not work i cant update the ipod either

hi i have a ipod touch 4 generation 64gb and my camera is blocked and dose not work i cant update the ipod either

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Since I downloaded the upgraded software, my charger that came with my phone says "this cable or accessory is not certified and may not work reliably with this iphone" It worked before but now it doesn't...I don't think I should have to buy a new one...

since I upgraded to the new operating system my charger no longer works...
It says"this cable or accessory is not certified and may not work reliably with this iPhone"

Try checking your cable socket/lightning cable for dirt, grime, pocket lint, etc. I could not find the solution to this issue myself and after much searching I found someone stating that cleaning this out helped them immensely.
After taking a wooden toothpick (making sure the phone was OFF first) and gently clearing out the edges and inside of the lightning socket this went away.) It is worth noting that I had a significant amount of dust or lint buildup along the edge rails which I think was causing the iphone to believe it was plugged into something when it was not.
Try it and see, ensure you are very careful and do not use any conductive tools to clean the area in question. Compressed air also does wonders here.

HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
Maps took me to the completely wrong side of town for a long standing business in town.

Hello margmcarlson,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
Best of luck,
Mario

My sons ipod classic was left on all day and now has a red circle with a cross in it and will not work

my sons ipod classic was left on all day and now has a red circle with a cross in it and will not work - nothing we do will make it work - any ideas??

Try to restore the iPod. Here's an article that provides troubleshooting for it.
http://support.apple.com/kb/TS1463
If that doesn't work visit an Apple Store and see if they can replace it.

Why does drag and drop not work?

Why does drag and drop not work?

Do you mean that when you move files on the Desktop, they don't stay where you put them ?.
If so - use Finder - View menu - Show View options & choose 'Arrange by' : none
If not - please describe exactly what the problem is.

HT1476 upgraded my IPOD 5 to iOS 7.0.2 and will not charge battery. when plugged in gives message "This cable or accessory is not certified and may not work reliably with this IPOD".

Just Upgraded my IPOD 5 to iOS 7.0.2 and it will not charge the battery anymore.
When I plug it in, it now gives the message "This cable or accessory is not certified and may not work reliably with this IPOD".
Anyone else have this issue after they upgraded the iOS system?
Thanks,

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

Instead of getting annoyed, read the User's Guide and try basic troubleshooting.

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
Camera Raw: How to use Adobe DNG Converter - YouTube

Numpad 789 and 123 not working in Quick Apply[ctrl+enter] window. [CC2014.1]

Similar Messages

Maybe you are looking for