Nv_done unable to open "flash:/config.text.new"

Please a help / support;
A have a WS-C2960-24TC-L that when i type the command copy running-config startup-config
Switch#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
nv_done: unable to open "flash:/config.text.new"
nv_done: unable to open "flash:/private-config.text.new"
nv_done: unable to open "flash:/multiple-fs.new"[OK]
0 bytes copied in 0.713 secs (0 bytes/sec)
Switch#
Best Regards
Fernando

Switch#dir system:
Directory of system:/
    2 -r--           0                    <no date> default-running-config
    4 dr-x           0                    <no date> memory
    1 -rw-        1346                    <no date> running-config
    3 dr-x           0                    <no date> vfiles
No space information available
Switch#

Similar Messages

Unable to open about:config

I am unable to open "about:config" in Firefox 4

Hi.
When I try to open "about:config" I get error message from IE
"Navigation to the website was cancelled"
My attempts to disable IE have been unsuccessful.
This has only occurred since I installed Firefox 4

Unable to open Flash file from 2009. Can I backsave a Flash file?

I have Flash files from 2009 and unable to open them in the current programs. Is there a way to backsave it?

Hello Rezun8 --
Here is a link to the Flash file: Dropbox - Flash_test_file_for_modules
Thanks for your help!

Unable to open terrigal uniting church news letter?

Cannot open terrigal uniting church news letter.

I have no idea what you're asking about. What is "terrigal"? This is a forum for opening and reading PDF files in the free Adobe Reader.

My texts aren't working-can't delete old ones, sometimes can open new ones (mostly can't even see them), and unable to open or respond to new conversations

I have an Iphone 4s with a carrier who doesn't have good signal where I like, and I'm switching over to another carrier this week. My Iphone has been having trouble receiving or sending texts for awhile because of the service provider, but I think this current problem is Apple. I had this issue when I first bought the phone less than a year ago, and it lessened (almost going away completely) for several months after exchanging it for a new phone.
New messages will still make an alert, but most of the time, I can't see who it's from or what it says-the message screen comes up blank, sometimes with the lines that are normally between texts but still blank. If I can see who it's from, sometimes I can click the new text and it will take me to the "compose new message" screen instead of to the conversation. My new texts will disappear for hours or days at a time and then magically reappear, and I haven't been able to determine a pattern. I don't believe it is from signal strength or Wi-FI issues, because sometimes texts and imessage work perfectly when the phone says I have bad signal and there is no available wi-fi, other times not going through when I have full signal strength and connected to full speed wi-fi.
Only texts from before the update remain on my phone, even after deleting the same conversations multiple times. I can't read or respond to my new messages.
Any advice/fixes would be welcome!
Thanks!

Are you still dealing with this?
On number 1, do you mean backup rather than sync?
I have had times where backup completed but did not backup some databases. Running backup again was the solution. If this is what is happening, reboot the BlackBerry and reboot the computer and try again. If backup actually fails to complete and throws an error, what is the error?
2. The reboot may resolve the text issue. If not, do a soft reset and try again. http://www.blackberry.com/btsc/KB02141
- Ira

Unable to open Photo library from new Photo App

When I try to open the new Photos App I get the following message "Photos was unable to make a copy of your library before preparing it. Photos does not have the necessary permissions..." I have tried the solution suggested be Apple using Terminal but that does not work. Help please

Option 1
Back Up and try rebuild the iPhoto library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Unable to open .dmg to install new lightroom purchase

Unable to run installer. Window reads: Operation cols not be completed. (com.apple.installer.pagecontroller error -1.) Couldn't open "Adobe Photoshop Lightroom 4.pkg."
Installer error log reads:
This distribution script is too new (Requires spec version >=2, current is 1.0388)
Error parsing distribution script from data
Invalid Distribution File/Package
I previously had a free trial of LR 4 tht expired
I have since purchased this copy online and tried to install it

This Error comes when lightroom is not compatible with current version of your MAC OS, Processor or Minimum system requirements are not meeting up. you can check the minimu system reuirement here : http://www.adobe.com/in/products/photoshop-lightroom/tech-specs.html
In case you find the Operating system and Processor compaitable with lightroom then please let us know the version of your MAC OS and the Processor details so that we can research more on this.

Unable to open linked files in new CS3 install

One of my clients just purchased a new PC (Dell Inspiron 537S) with Windows Vista Home Premium to replace his old Inspiron 530 (also running Vista HP). After installing CS3 Design Studio and attaching an external drive loaded with his file archive, all of his Illustrator files which include links load with the following error:
"An error occurred trying to read the linked file "file.xxx". Choose Repair to locate the missing file, Replace to select another file or Ignore to leave the link unchanged."
This shouldn't be unusual, if the path to a linked file has changed, you'd need to point the link to the new path, but clicking Repair or Replace and browsing to the linked file (which invarably is in the same directory as the .ai file, and is usually a .psd which opens just fine in Photoshop) just cycles back to the same error message, ad infinitum. After about 30 tries, I got one of the links to load correctly, resaved the document, thinking that would repair it, but when I opened it again, got the error.
These files were created on multiple computers, and none of the other computers (all with CS3) have ever had any trouble opening them. This despite the drive letter on the external drive being unstable on the old system (would often be J:, K: or L:, and images always worked).
Any new .ai files we create on this file which have links all work fine.
Manually replacing the links in a file is not an option for two reasons:
1. There are thousands of .ai files in this archive, and re-linking images in them will take weeks.
2. It simply doesn't work. I tried ignoring the error on one file to load it, and re-linking the .psd backgrounds to re-save it, and the images still didn't load after re-linking them.
I have already tried doing a factory-restore of the system and reinstalling CS3, making sure that there were no errors in the install. What else might cause this behavior, and how can I resolve it?

What else might cause this behavior, and how can I resolve it?
Outdated permissions on the files from your old computer. Right-click, Properties --> Security --> Advanced, disable Inherit settings from parent folders, chose to copy. After that, delete outdated security keys and assign current ones. You may even need to go so fart as to Take Ownership of some files to correctly restore the new system's default security settings.
Mylenium

Unable to open iTunes account after new .Mac account is opened

I recently opened a .Mac account and it appears that Apple totally changed all my previous accounts. All of my accounts where changed even iTunes. Now I can't get into my iTunes account with the old name nor the new .Mac either. I have a balance to my iTunes account and no way to find it. Does anyone have any idea how to send an e-mail to iTunes or figure a way to find my old account?

got my answers

Unable to open forms or create new ones

I'm getting an error any time I try to create a new form or open an existing one in LiveCycle Designer ES 8.2. In my event viewer it references event ID: 1000 and gives the following description: Faulting application formdesigner.exe, version 8.2.1.3144, faulting module formdesigner.exe, version 8.2.1.3144, fault address 0x000a50cb.
What is this and how can I fix it?
Thanks!

YAY!! I found the answer to my problem in this posting:
Steve Pence, "Livecycle Designer ES 8.2 win32 exception" #3, 12 Aug 2008 12:29 am

Unable to open mail on a new phone

Just got a new iPhone 5s today and already put it on 7.0.3. I also saved purchase and all my old iPhone 4 stuff before transfers it to my 5s. Now, everything seem ok but I can't get any mail. All my 3 mailbox pop in a row (in French) "impossible to charge mail, the connection to the server has fail". What can I do to recover them? (Mailbox) All address and password are ok so I don't know now.
Thank you

If you are unable to make connection to the server, then all of the usernames and passwords are not correct. Incoming mail server needs the username and password to connect. If you restored from a backup of the old device, the password does not come over with the account. Go into each of the mail accounts in Settings>Mail, Contacts, Calendars and check the username and password settings on each account. Sending of email is done by the SMTP server. So if you get an error when attempting to send mail, you will need to check the settings there as well.

GNOME3 - Unable to open Keyboard config

I always get the following
GLib-GIO-ERROR **: Settings schema 'org.gnome.settings-daemon.peripherals.keyboard' is not installed
aborting...

you don't have gnome-settings-daemon 3.0.0.1-1
i guess you have some older packages from aur
pacman -Qm

I m unable to open my lotus Domino mailbox using this new version of firefox,

When i try to open my official mailbox from my personal laptop, i m unable to open that in the new version of firefox . its IBM lotus domino server. below is the error message i m getting with a pop-up window :
"A Domino Web Access script error has occurred that might result in missing data within the current page. If your current operation did not complete, click OK, and then refresh your browser display.
Show details
Below is the server site addr i try to connect :https://inchnm01.tcs.com/mail/mail3/318779.nsf/iNotes/Mail/?OpenDocument

Which version of Office, 2004, 2008 or 2011
and
MS Office is not available from the App Store, so where did you get it?

Open flash file in SharePoint with custom page

Dear Team,
I have a document library with .swf files, by default, if the browser has flash related plugin, the file would be opened in browser directly, if the browser has no such plugin, the file would be downloaded to local.
To avoid downloading and opening the document in client local, I would like to use my customized page to open the .swf file when clicking it in library.
Any way to do this?
Thanks,
Qiao Wei
My blog:http://blog.goobol.com

Hi,
Please check below
http://www.robertkuzma.com/2010/08/unable-to-open-flash-or-html-page-in-sharepoint-foundation-2010/
http://www.sharepointdiary.com/2010/05/using-flashswf-files-in-sharepoint.html
Please remember to click 'Mark as Answer' on the answer if it helps you

Unable to open forms in 10g AS, windows 2003

Hi
I successfully install oracle 10g AS R2 on windows 2003 server,but unable to opening default forms(text.fmx) from OracleAS form services also getting an error " Page cannot be displayed".
Initially when I run the test forms it installed jinitiator and closed the browser automatically, and the same repeating every time/page cannot be displayed.
I tried by changing the default forms path also, but no use :-(
Any suggestions?
I really appreciate your help
Chaitu

ths 4 ur replay
I tried with local admin also but no use
http://yyy.yyy.yyy:8080/forms/frmservlet?form=test.fmx&userid=&otherparams=useSDI=yes&lookAndFeel=oracle&colorScheme=blue
that's the default form like to check forms are working or not after installation of oracle 10g AS
Chaitu

Nv_done unable to open "flash:/config.text.new"

Similar Messages

Maybe you are looking for