NVARCHAR2 Oracle fields do not display correctly

My client is running Oracle 9.2 with BO XIR3. The universes connect via Oracle 9.2 driver.
The DB uses NVARCHAR2 fields to store text data. Any Cyrillic characters are showing as upside down ?
Surely these should just map directly to Unicode text without any code page settings needed?

The data in question is stored in nvarchar2 fields in UTF-16 format - surely the nls_lang variable does not affect these but only data stored in varchar2 fields?
A Unicode C++ application running on the same machine can access these fields correctly using the Oracle OLEDB driver which I assume also use the Oracle OCI at a lower level (as does the BO driver for Oracle)

Similar Messages

Aligned Form Fields Do Not Display Correctly Where Visible Borders Overlap?

I'm on creating some forms & checklists for the company I work for to simplify our project workflow. When adding text fields to the form I'd like to add borders to segregate the various fields & make the form more presentable.
The problem I'm having, is that I'm unable to place fields immediately adjacent one another without leaving a gap. If I do & use the snap to grid option, aligning the top of one field with bottom of another, it does not display correctly when printed. The border lines appear to have differing thicknesses where they touch & this makes the form look terrible. Currently I'm having to create the borders in an excel spreadsheet, convert to pdf & add borderless fields within the pre printed borders. While this gives me the look i want, if I later want to add to or amend the form I have to start from scratch first modifying the initial excel layout which is too time consuming. I'm using Acrobat X Pro. Any assistance appreciated.
Regards
John

There are at least two techniques to allow you to change the underlying layout and remake the static part of the PDF, without having to redo the form fields (except new ones, and moving as needed).
That is replace pages and copy-paste of form fields.

File Path and Name field does not display correct path

We are using Crystal 2008 along with VS 2005. We embed the special "File Path and Name" field inside our report and it displays the correct path when viewed inside Crystal reports:
C:\Program Files\reports\Chart.rpt
When run through the web and viewed in the DHTML viewer, the file name and path appear as follows:
C:\Windows\TEMP\Chart {02152A43-3339-4C03-A50A-E281E1D391AF}.rpt
How can this be corrected?
Thanks in advance for any assistance.

This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek

Form fields do not display correctly

Well, I made a nice screenshot with callouts to help illustrate this issue, but I don't see anywhere to attach an image.
Drop down menus show up as text boxes with a centered underscore which changes to a box when hovered over, and there's a grey square to the right which drops down the menu.
Radio buttons show up as dark gray squares and do not function. Check boxes show up as a little gray square with an arrow that rotates when hovered over, and do not function.
This is consistent across the Safari interface, menu items, preferences, etc as well as any website.
A Google search revealed a fix for Mac to delete installed plug ins. I can view them via the help menu, but not delete. The only thing in the plug ins folder are java files. How do I remove the plugins?
Similar issues within this forum suggest fixes that do no apply such as removing a certain application.
I would like to resolve this. I successfully migrated from Firefox on my work computer, including bookmarks synced to MobileMe and Roboform password data using their online feature. But when I got home, here is where these issues exist.
Dell XPS, Vista SP2 blah blah blah

Have you set your Windows XP to Windows Classic appearance like I had? I found this link which explains the problem you have and I had.
http://discussions.apple.com/thread.jspa?messageID=9830945&#9830945
It has two or more solutions but the one that worked for me was to:-
Close Safari
Right-click Windows desktop and change to Windows XP in Appearance settings
Open Safari and the radio buttons and checkboxes should work
Close Safari
Change Windows back to Windows Classic
Open Safari and the radio buttons and checkboxes should still work.
I hope it works for you.

Date can not display correctly in excel from .jsp

Hi,
I create a .jsp report to export the data to excel. the report run OK, except the date field can not display correctly.
for example in database :start date ='01-oct-2003'
in the except it displays to 02/06/02.
It seem all the date field can not be control in the report, and control by somthing else
Doese anyone come accross this problem?
Thanks

Hi Rong,
Are you using the following demonstration to build your JSP?
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
(Output to Excel with Oracle9i Report)
I tried to do the same, and inserted a database date field in the JSP using Reports. I found the following:
While making the template inside Excel, if I make sure that the format of the date cells is "Date" - some particular date format, the date field values from Reports does not get exported correctly.
However, if you make sure that inside the template, the format of the date cells is not date, but "General", then the date field values are correctly exported to Excel.
Pl try it and let us know.
Navneet.

Report does not display correctly when exported to adobe

Post Author: mgisonda
CA Forum: Crystal Reports
Hopefully someone can help me. I am currently running Crystal Reports profession version 10. I have applied service pack 1 and recently service pack 6. I am having a problem with the display of a report within adobe. My report is a bit complex. It is a 8.5x11 one page landscape report. It is set up in a grid format with multiple lines and boxes drawn on it. Here is the report information: Report Definition----
Number of Database Fields: 144 Number of On-Demand Formulas: 40 UFLs in use: None Page N of M Used: No File Format Schema: 10.2.0 I created the report using CR developer. I use the report within a web project. The user requests the report and it returns to the user, an adobe file of the report. However, this is where I am having trouble. On my local development machine, the report displays fine. In CR developer, the report displays fine. When I export the report to Adobe from the CR Developer, it exports fine. BUT when I run the report from my web site, the adobe file that is returned is broken up over 42 pages. What seems to be actually happening is the return adobe file seems to think that the page size is 2in X 4in.. Where it got that, I don't know.The server running IIS is a windows server 2003. It has adobe 8.0 reader on it. I also have Crystal 10 Server Distribution loaded on it. And I have loaded CR10 Service pack 6 on that as well. Below is the web code that is used to display the report:Imports CrystalDecisions.Shared'Imports CrystalDecisions.CrystalReportsImports CrystalDecisions.CrystalReports.EngineImports CrystalDecisions.CrystalReports.Engine.ReportClassPublic Class PrintInspectionLayout Inherits System.Web.UI.Page Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim mNotInSpringDesign As String Dim mPartType As String mNotInSpringDesign = Request.QueryString("NotInSpringDesign") If mNotInSpringDesign = "TRUE" Then mStockCode = Request.QueryString("StockCode") lblNotInSpringDesign.Text = "Stock Code #: " & mStockCode & " does not exist in Spring Design." lblNotInSpringDesign.Visible = True Response.Write("<br><br><br><br><br><font color='blue'><center><a href='SpringDesignWildCardSearch.aspx'>Go To Search Page</a></center></font>") Else mStockCode = Request.QueryString("StockCode") Dim pList As ParameterValues = New ParameterValues Dim paramName, paramValue As String Dim pV As ParameterDiscreteValue = New ParameterDiscreteValue Dim Report As ReportDocument= New ReportDocument Dim expOpts As ExportOptions = New ExportOptions Dim pdfRtfWordFormatOpts As PdfRtfWordFormatOptions = expOpts.CreatePdfRtfWordFormatOptions Dim expFormatOpts As ExportFormatOptions = expOpts.ExportFormatOptions expOpts.ExportFormatType = ExportFormatType.PortableDocFormat mPartType = Request.QueryString("PartType") 'SELECT THE INSPECTION LAYOUT TYPE TO PRINT Select Case mPartType Case Is = "C" Report.Load(MapPath("./Reports/CompressionLayout.rpt")) 'Report.Load(MapPath("./Reports/PCAR.rpt")) Case Is = "E" Report.Load(MapPath("./Reports/ExtensionLayout.rpt")) Case Is = "T" Report.Load(MapPath("./Reports/TorsionLayout.rpt")) Case Is = "W" Report.Load(MapPath("./Reports/WasherLayout.rpt")) Case Is = "F" Report.Load(MapPath("./Reports/FreeFormLayout.rpt")) Case Else End Select pV.Value = mStockCode pList.Add(pV) Report.DataDefinition.ParameterFields("StockCode").ApplyCurrentValues(pList) Response.ClearContent() Response.ClearHeaders() Response.ContentType = "Application/pdf" Report.ExportToHttpResponse(expOpts, Response, False, "") Report.Close() End If End Sub Any ideas as to the solution? Why is it not displaying correctly? I have spent two days researching every FAQ to try to find an answer, but to no avail. Please any help would be greatly appreciated. ThanksMike

Hi Paul
You're more likely to get an answer to this if you post in the UNIX forum.
By the looks of it, you may have a problem with your fonts.

Eurosign not displayed correctly when picked from database

Hi ..
I'm having a problem getting a eurosign stored in an Oracle Database to be displayed correctly in my Crystal Reports 11.5.
When using the built in (preview) Crystal Viewer, the eurosign is displayed correctly, but when I want to print the report directly to a printer or to export it to pdf the eurosign is displayed as a box?
It only haapens when i need to pick the eurosign from the database. If I insert in a textbox on the report, it will show correctly.
Please Help.
Best regards,
Jacob

What is the source of the text stored in the database. I ran into an issue a ways back where someone was copying news articles from a website into their database and the euro symbol would not display correctly (unless the option HTML Text Interpretation was used).
You might want to do a quick check to see if it is stored as an ascii character using a formula similar to the following;
asc(mid({database, x, 1}))
where x = the position of the euro symbol in the string.
The formula result should be 128.
Edited by: Graham Cunningham on May 22, 2009 12:20 PM

Report Links in OBIEE 11g Dashboard not displayed correctly

In the Dashboard pages the Report Links for Export are not displayed correctly .
Instead of showing the multiple options for export/download it shows just text.

It can be done by doing below steps.
1) before doing this take a backup of instanconfig.xml file and do the below changes...
You can configure various options that change the way that right-click interactions are handled in views for an analysis at runtime. The elements in the instanceconfig.xml file specify the default settings for a new or upgraded analysis. You can edit the properties of an analysis in Presentation Services to modify how the analysis handles right-click interactions in views.
Before you begin this procedure, ensure that you are familiar with the information in Section 3.4, "Using a Text Editor to Update Configuration Settings."
To manually configure for interactions in views:
2) C:\Oracle\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml
Open the instanceconfig.xml file for editing,
3)
Locate the sections in which you must add the elements
Include the elements and their ancestor elements as appropriate, as shown in the following example:
<ServerInstance>
<Analysis>
<InteractionProperties>
<InteractionPropertyAddRemoveValues>false</InteractionPropertyAddRemoveValues>
<InteractionPropertyCalcItemOperations>false</InteractionPropertyCalcItemOperations>
<InteractionPropertyDrill>false</InteractionPropertyDrill>
<InteractionPropertyGroupOperations>false</InteractionPropertyGroupOperations>
<InteractionPropertyInclExclColumns>false</InteractionPropertyInclExclColumns>
<InteractionPropertyMoveColumns>false</InteractionPropertyMoveColumns>
<InteractionPropertyRunningSum>false</InteractionPropertyRunningSum>
<InteractionPropertyShowHideSubTotal>false</InteractionPropertyShowHideSubTotal>
<InteractionPropertySortColumns>false</InteractionPropertySortColumns>
</InteractionProperties>
</Analysis>
</ServerInstance>
4) Save your changes and close the file.
5)
Restart Oracle Business Intelligence.
Mark as correct if it is helpful :)
Thanks.

Search for member activities - points are not displayed correctly

Hi experts,
I have a question concerning the search for member activities. I personalized my result list and added the field points (STRUCT.Product_ID), but there the amount of the points is always displayed as zero. When going into the details of the member activity I can see that there are points booked.
Can anyone tell me why the points in the result list are not displayed correctly?
Thanks and best regards
Anne

Sometimes threads are deleted if they violate the Rules of Engagement. If that happens, you'll lose points that were allocated to you. Othertimes, if you broke the rules, then it's possible that points that had been awarded could have been removed - but you should check your emails (of your registered address) to verify this. I'd guess, it's more likely you'd responded to a post that broke the rules.
Really important
1. Don't reply to posts that break the rules - you risk losing any points awarded and you risk wasting your time responding (which is probably more valuable).
2. Don't ignore rejection emails or other communications from moderators. They are followed up, and, if warnings are ignored, then accounts will be deleted. Recently, one poor soul's account was deleted, and they'd accrued over a 1000 points... they'd been copy and pasting from other sites and ignored moderator warnings.
matt

HTML Content not displayed correctly in UWL

Hi all,
I have setup UWL to connect to SRM 5.0 system. I have no problem retrieving alerts from the backend. However, alerts with HTML content are not displayed correctly in the UWL. Instead of parsing the HTML content, the html tags are displayed instead.
Am I missing some configurations here?
Thanks in advance.

Hi Benny;
Please see:
My Oracle Support FAQ [ID 747242.5] << What are the browser requirements for accessing My Oracle Support?
If you have still problem you can go wiht SR
Regard
Helios

Entity Descriptions are not displayed correctly in Combo box dropdown list

In Web Analysis, Entity Descriptions are not displayed correctly in Combo box dropdown list when entity descriptions from HFM contains a dot(.)
Example:
'Entity A. LTD' becomes 'LTD'
'Entity B Inc.' becomes blank
It seems that everything before the dot is not displayed when opening the combobox.
It looks like it is acting like the option to show short description for entities in HR where the parent-child relation is not shown. This behaviour I don't expect for descriptions. And in my opinion is not an option in Web Analysis.
Does anybody knows the sollution or have seen this issue before?

Hi,
This is a known issue with combo box list of values.
Please follow this workaround:
- Remove ComboboxLOV on Deptno
- Create an updateable transient attribute(Say Dname) of type String
- Define combobox lov with following values:
List Data Source: DeptView1
List Attribute: Dname
List Return Values:
Dname - Dname
Deptno - Deptno
UI Hints: Display Attribute - Dname
- Edit Dname(transient attribute) and provide following groovy expression
oracle.jbo.Key key = new oracle.jbo.Key(Deptno);
return DeptView1.findByKey(key, 1)[0].getAttribute("Dname");- Now, you are done and observe that Dname combo box lov shows Description even on selection and change in this combo box sets the Deptno value
Sireesha

The Forms are not displaying correctly

the Forms are not displaying correctly. Editing mode and printing mode are missing contents of notes/text field (Additional Notes, Background or Need, Project Summary). Second issue is when viewing/printing a Project Profile - Short Form, the text fields
are shrink, they are not displayed full high to show all the text. It was working with IE9, IE10, but now IE10 and IE11 dont work.

tested with Google Chrome and that seems to work the best in terms of viewing and printing the forms.
Then you could try spoofing Google Chrome using a User-Agent string override and Document mode Edge. Or open IECompatData.xml to see if you should have Compatibility View enabling Microsoft's list. Or report your problem symptom and
desired override here:
http://www.modern.ie/report-compat-problem
Ref:
http://msdn.microsoft.com/en-us/library/gg699485(v=VS.85).aspx
Robert Aldwinckle

Dynamic Select List not displaying correct value

Hi there!
I have a page with a dynamic repeat region.
As I press one record I get up all the details based on id on an edit page.
The problem is that the info that is inserted via a Select List is not displaying correct on edit page.
All the other values are correct, also the values in the repeat region on index page,
but the value from the Select List on edit page is just displaying the initially selected item.
Have tried using SELECT DISTINCT in the SQL statement, but no luck.
Any other ideas?
Cut and paste from form:
<select name="Vegtype" class="ProvDet" id="Vegtype" title="<%=(rsAs.Fields.Item("VegType").Value)%>">
                    <option value="Ev" selected="selected">Ev</option>
                    <option value="Fv">Fv</option>
                    <option value="Rv">Rv</option>
                    <option value="Kv">Kv</option>
                  </select>
Recordset
<%
Dim rsAs
Dim rsAs_cmd
Dim rsAs_numRows
Set rsAs_cmd = Server.CreateObject ("ADODB.Command")
rsAs_cmd.ActiveConnection = MM_LabCon_STRING
rsAs_cmd.CommandText = "SELECT DISTINCT DatoM, DatoR, DatoU, Distr, FagFelt, Felt, IntNr, Km, KontrNr, Kontrollor, Masse, MasseBK, Punkt, Resept, TestID, UserID, VegHp, VegNavn, VegNr, VegType FROM tblTest WHERE TestID = ?"
rsAs_cmd.Prepared = true
rsAs_cmd.Parameters.Append rsAs_cmd.CreateParameter("param1", 5, 1, -1, rsAs__MMColParam) ' adDouble
Set rsAs = rsAs_cmd.Execute
rsAs_numRows = 0
%>
Regards,
Christian
DWCS5 | .Asp | MS Access

Ok, here goes the top down approach...
In the HTML header of my page, i have this reference to a js file containing the javascript - <script src="#WORKSPACE_IMAGES#108.js" type="text/javascript"></script>
Then in an HTML Region I have the following code to create the divs that will be shown and hidden - <div id="divREGION" class="divs">Select region to get list of countries.</div>
<div id="divCOUNTRY" class="divs">Select country to get list of cities.</div>
<div id="divCITY" class="divs">Select city and then press "Get Employees". </div>
Note that these divs contain static content. You may be able to create dynamic content for these divs by creating dynamic query regions and putting div tags around the region (i havent tried this, it may require template modification).
The select boxes have this code in the "HTML form elements attributes" - onFocus="javascript:showHideDiv(this,true)" onBlur="javascript:showHideDiv(this,false)"
This onFocus and onBlur call the showHideDiv() function, passing in the object reference of the select box and a true/false to show/hide the related div.
The actual javascript function that is contained in the 108.js file is:
function showHideDiv(objThis, inBool){
     var divid = "div" + objThis.id.substring(3);
     if (inBool) {
     ShowDiv(divid);
     else {
HideDiv(divid);
That function in turn calls either the ShowDiv() or HideDiv() functions, depending on the true or false, passing in the ID of the div to be changed...
function ShowDiv(divid){
     eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "inline"');
function HideDiv(divid){
     eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "none"');
Hope this helps.

Abstract classes and methods with dollar.decimal not displaying correctly

Hi, I'm working on a homework assignment and need a little help. I have two classes, 1 abstract class, 1 extends class and 1 program file. When I run the program file, it executes properly, but the stored values are not displaying correctly. I'm trying to get them to display in the dollar format, but it's leaving off the last 0. Can someone please offer some assistance. Here's what I did.
File 1
public abstract class Customer//Using the abstract class for the customer info
private String name;//customer name
private String acctNo;//customer account number
private int branchNumber;//The bank branch number
//The constructor accepts as arguments the name, acctNo, and branchNumber
public Customer(String n, String acct, int b)
    name = n;
    acctNo = acct;
    branchNumber = b;
//toString method
public String toString()
String str;
    str = "Name: " + name + "\nAccount Number: " + acctNo + "\nBranch Number: " + branchNumber;
    return str;
//Using the abstract method for the getCurrentBalance class
public abstract double getCurrentBalance();
}file 2
public class AccountTrans extends Customer //
    private final double
    MONTHLY_DEPOSITS = 100,
    COMPANY_MATCH = 10,
    MONTHLY_INTEREST = 1;
    private double monthlyDeposit,
    coMatch,
    monthlyInt;
    //The constructor accepts as arguments the name, acctNo, and branchNumber
    public AccountTrans(String n, String acct, int b)
        super(n, acct, b);
    //The setMonthlyDeposit accepts the value for the monthly deposit amount
    public void setMonthlyDeposit(double deposit)
        monthlyDeposit = deposit;
    //The setCompanyMatch accepts the value for the monthly company match amount
    public void setCompanyMatch(double match)
        coMatch = match;
    //The setMonthlyInterest accepts the value for the monthly interest amount
    public void setMonthlyInterest(double interest)
        monthlyInt = interest;
    //toString method
    public String toString()
        String str;
        str = super.toString() +
        "\nAccount Type: Hybrid Retirement" +
        "\nDeposits: $" + monthlyDeposit +
        "\nCompany Match: $" + coMatch +
        "\nInterest: $" + monthlyInt;
        return str;
    //Using the getter method for the customer.java fields
    public double getCurrentBalance()
        double currentBalance;
        currentBalance = (monthlyDeposit + coMatch + monthlyInt) * (2);
        return currentBalance;
}File 3
    public static void main(String[] args)
//Creates the AccountTrans object
        AccountTrans acctTrans = new AccountTrans("Jane Smith", "A123ZW", 435);
        //Created to store the values for the MonthlyDeposit,
        //CompanyMatch, MonthlyInterest
        acctTrans.setMonthlyDeposit(100);
        acctTrans.setCompanyMatch(10);
        acctTrans.setMonthlyInterest(5);
        DecimalFormat dollar = new DecimalFormat("#,##0.00");
        //This will display the customer's data
        System.out.println(acctTrans);
        //This will display the current balance times 2 since the current
        //month is February.
        System.out.println("Your current balance is $"
                + dollar.format(acctTrans.getCurrentBalance()));
    }

Get a hair cut!
h1. The Ubiquitous Newbie Tips
* DON'T SHOUT!!!
* Homework dumps will be flamed mercilessly. [Feelin' lucky, punk? Well, do ya'?|http://www.youtube.com/watch?v=1-0BVT4cqGY]
* Have a quick scan through the [Forum FAQ's|http://wikis.sun.com/display/SunForums/Forums.sun.com+FAQ].
h5. Ask a good question
* Don't forget to actually ask a question. No, The subject line doesn't count.
* Don't even talk to me until you've:
    (a) [googled it|http://www.google.com.au/] and
    (b) had a squizzy at the [Java Cheat Sheet|http://mindprod.com/jgloss/jcheat.html] and
    (c) looked it up in [Sun's Java Tutorials|http://java.sun.com/docs/books/tutorial/] and
    (d) read the relevant section of the [API Docs|http://java.sun.com/javase/6/docs/api/index-files/index-1.html] and maybe even
    (e) referred to the JLS for "advanced" questions.
* [Good questions|http://www.catb.org/~esr/faqs/smart-questions.html#intro] get better Answers. It's a fact. Trust me on this one.
    - Lots of regulars on these forums simply don't read badly written questions. It's just too frustrating.
      - FFS spare us the SMS and L33t speak! Pull your pants up, and get a hair cut!
    - Often you discover your own mistake whilst forming a "Good question".
    - Often you discover that you where trying to answer "[the wrong question|http://blog.aisleten.com/2008/11/20/youre-asking-the-wrong-question/]".
    - Many of the regulars on these forums will bend over backwards to help with a "Good question",
      especially to a nuggetty problem, because they're interested in the answer.
* Improve your chances of getting laid tonight by writing an SSCCE
    - For you normal people, That's a: Short Self-Contained Compilable (Correct) Example.
    - Short is sweet: No-one wants to wade through 5000 lines to find your syntax errors!
    - Often you discover your own mistake whilst writing an SSCCE.
    - Often you solve your own problem whilst preparing the SSCCE.
    - Solving your own problem yields a sense of accomplishment, which makes you smarter ;-)
h5. Formatting Matters
* Post your code between a pair of {code} tags
    - That is: {code} ... your code goes here ... {code}
    - This makes your code easier to read by preserving whitespace and highlighting java syntax.
    - Copy&paste your source code directly from your editor. The forum editor basically sucks.
    - The forums tabwidth is 8, as per [the java coding conventions|http://java.sun.com/docs/codeconv/].
      - Indents will go jagged if your tabwidth!=8 and you've mixed tabs and spaces.
      - Indentation is essential to following program code.
      - Long lines (say > 132 chars) should be wrapped.
* Post your error messages between a pair of {code} tags:
    - That is: {code} ... errors here ... {code}
    - OR: [pre]{noformat} ... errors here ... {noformat}[/pre]
    - To make it easier for us to find, Mark the erroneous line(s) in your source-code. For example:
        System.out.println("Your momma!); // <<<< ERROR 1
    - Note that error messages are rendered basically useless if the code has been
      modified AT ALL since the error message was produced.
    - Here's [How to read a stacktrace|http://www.0xcafefeed.com/2004/06/of-thread-dumps-and-stack-traces/].
* The forum editor has a "Preview" pane. Use it.
    - If you're new around here you'll probably find the "Rich Text" view is easier to use.
    - WARNING: Swapping from "Plain Text" view to "Rich Text" scrambles the markup!
    - To see how a posted "special effect" is done, click reply then click the quote button.
If you (the newbie) have covered these bases *you deserve, and can therefore expect, GOOD answers!*
h1. The pledge!
We the New To Java regulars do hereby pledge to refrain from flaming anybody, no matter how gumbyish the question, if the OP has demonstrably tried to cover these bases. The rest are fair game.

Unicode character not displaying correctly

when i am stroring Unicode Character in Oracle 8 DB .The Stored Character are not displayed correctly . Through sql client seen as '�' .Altough through JSp it displays correct value 集 (in japanese)
My client wants to see through sql also same value . Pls help wat is wrong. More info :
Oracle is set up in UTF-8 Format.
Using code as below before inserting in DB
String temp =product.getDescription();
String newResult = new String(temp.getBytes("UTF-8"), "UTF-8");

TryString newResult = new String(temp.getBytes(default),>
"UTF-8");// "default" is a String of the name of
default encoding on the part of client
Sorry there was a slip. Try the following.
String newResult = new String(temp.getBytes(default));

NVARCHAR2 Oracle fields do not display correctly

Similar Messages

Maybe you are looking for