NVDIA compatability? Value for money?

I have a Hybrid SSD and was thinking of buying an NVDIA card to speed up rendering in After Effects.
Which is the best to buy. How much faster do they enable rendering. Are they stable? Easy to fit? Any known problems?
If you know about a good article on the subject or have first hand experience - do let me know.
Thanks

I think your best bet is
A) Barefeats - has done a lot of tests to try to answer
B) MacRumors - they are always debating the topic!
Is there a perfect solution? maybe not. In some cases dual GPU has been shown to help. Some use to use an ATI for displas and GTX (285 or 470 etc or Quadro 4000) for rendering.
2010 model has best, you have t o watch for power supported if you get beyond two 6-pin aux cables and 225W.
http://forums.macrumors.com/forumdisplay.php?f=1
http://www.barefeats.com has these benchtests
September 13th, 2013 --
CRAZY FAST GPUs for Mac Pro: GeForce GTX Titan and 780
May 10th, 2013 -- Do the newest GPUs run faster on the 2010 Mac Prothan on the 2009 and 2008 Mac Pro?
April 26th, 2013 -- PART THREE: EVGA GeForce GTX 680 Mac Editionversus the 'Sharks' (insane GPUs like the GeForce GTX 580 Classified and GTX 690)
April 18th, 2013 -- PART TWO: EVGA GeForce GTX 680 "Mac Edition"Versus Past and Present Mac GPUs running Pro Apps
April 16th, 2013 -- PART ONE: EVGA GeForce GTX 680 "Mac Edition"versus Past and Present Mac GPUs running OpenGL accelerated Games and Benchmarks

Similar Messages

Tango , FaceTime blocked !! Any value for money VPN in Middle East ?

Hi
I'm using iPhone 5 iOS 7 all legit no jailbreak
I live in the Middle East
Tango , true caller and FaceTime are blocked
I need something to make video calls
Am thinking of going the VPN route
What are the good value for money options and will they be strong enough for video calls ??
Thanks in advance
Regards

I know it's created and published by carriers. I met a few working at Ooredoo Qatar who told me how everything works with Apple, And that is why I suggested this fix. Apple wont need to modify the current carrier bundles, or even notify them.
Countries where FaceTime is blocked as KSA and UAE already have "AllowVOIP" available in their carrier bundle and set to off, my carrier in Qatar has it set to on and that is why I have FaceTime. T-Mobile doesn't even have this field and that is why I lose FaceTime once my T-Mobile US SIM is inside. All Apple needs to do is enable FaceTime by default and only block it if asked specifically to do so by the "AllowVOIP" field.

Best value-for-money 3G broadband provider in Sydney?

Hi,
I'm shopping around for a 3G BB provider in Sydney. Telstra appears the obvious choice, but is there a better-value provider else where? I have the Ericsson F3607gw adapter on a Satellite T130 / 02M, and I think it's on the 850MHz band (based on on-line specs). However, I seem to recall that the ad from JB Hi-Fi then (July2010) also mentioned 2100MHz.
Can someone pls advise the actual bands this adapter can use (can't find it on the laptop), what is the top speed (and is there a way to increase throughput), and a reliable provider. Expected usage is around Sydney Metro. OS is Win7 Pro.
Many thanks for any help.

Telstra usually have good speeds but you pay extra for that speed, and I believe the F3607gw is 7.2mb/s max anyway.
3/Vodafone seem to have some good deals right now.
Here is a list of deals from various providers:
http://broadbandguide.com.au/
Also have a look on this discussion board:
http://forums.whirlpool.net.au/

Value for money?

Hi,
Will I notice a significant difference between running an i5 4460 pc with an nvidia 750ti 2gb graphics card and an i7 4790 with the same card?
The i7 will cost approx £100 more. Will the i7 save me hours when it comes to rendering/exporting or just a few seconds/minutes here and there?
Thank you

The difference would be huge, get the i7. The i5-4460 has 4 cores, but no Hyperthreads. In addition to having a faster clock speed, the i7 CPU you mention supports Hyperthreading and therefore doubles the cores to 8 that are available for Premiere Pro.
Regards,
Jim

No value for money

i purchased new asha 230 by paying 3600. But it does not support hike messenger,telegram and other social apps...ram64mb . But my purchased micromax bolt by paying 3500.... It has all things such as android,512 ram,front cam,gps,3g..etc... And also '1' year warranty..
Y Nokia produced costly phones?????? Any knows the ans...??

While I'll agree that Nokia's Asha devices were pretty dull on the VFM factor as they lacked many of the features, most appropriately the well developed apps. But the pricing can't be compared to companies such as Micromax. As with every big company, there are a lot of costs associated with the production, sales and support and they need to be covered from what you pay.

Wich dreamweaver version offers the best value for the money

Hello,
I'm the editor of http://www.sjiekdelola.nl and thinking about redesigning my site with Dreamweaver. Wich dreamweaver version offers the best value for the money?
Kind regards,
Sjiek de Lola

The current one :-)
DW CS5 uses modern code and supports web standards that didn't exist 2 years ago.
If you're asking which Adobe Creative Suite to get, that depends on you and your requirements.
Creative Suite Selector
http://www.adobe.com/products/creativesuite/suiteselector/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

ERROR ITMS-9000: "This bundle is invalid. The value for key CFBundleVersion...

Hi
I've tried to submit to the AppStore my new revision V27 (1.0.5) instead of V28 (1.0.2) for Ipad 1 compatibility but i get this error :
ERROR ITMS-9000: "This bundle is invalid. The value for key CFBundleVersion [3.2.4.6.88575] in the Info.plist file must contain a higher version than that of the previously uploaded version [3.3.1.3.8
How could i change the CFBundleVersion ????
Thanks

DPS gold support can help you. Please login to your DPS dashboard https://digitalpublishing.acrobat.com/SignIn.html and you'll find the contact information on the bottom of the page

What the Initial value for sy-tabix & sy-index

Hi Folks
I have a small doubt.
What the Initial value for sy-tabix & sy-index?
Can anyone please clarify me?
Regards,
Sree

hi sree,
both values are initialized to 0 before processing and after processing values are changed according to used scenarios.
if helpful reward some points.
with regards,
suresh babu aluri.

Report on Open Items along with Qty & Value for LA confirmed items

Hi,
I would like to know a report of Open POs(No Goods receipt made) but LA confirmed Items along with Values(Amount)
i.e
List of confirmed,unsent items along with Values for plant wise or vendor wise or PO Number wise.
Regards,
Vengat

Hi,
Any other inputs?
Our client's requirement is to know how many (Both Qty & Value) of items for the input LA confirmed(ASN received) but no GR Made
Regards,
Vengat

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

Error that "specify a value for variable posting period (single value entry

hi
My query is running testing fine in RSECADMIN under some username..but when i try and open it using analyzer (under same username) it gives me error that "specify a value for variable posting period (single value entry, mandatry)" it does'nt even asks to enter variable values and gives this error message.
However the same query appears to be working fine under different username.
plz advise.

Hi Abhinav,
Just do one thing compare the Roles of two different users for which Query is getting executed and not.
Check the Object S_RFC.
Compare the Objects detail for Both the Users.
Please Assign points if useful.
Regards,
Rajdeep.

Error while reading UcdContext [trying to read / set application values for users]

Hi,
I am trying to write a program to store user selected values on NW7.3 Portal using "User Content Directory". I can see and read some code snippets on how to set and read the context but I am getting one error after another.
The error message I am getting is
"com.sapportals.portal.pcd.gl.PcdGlContext:service:[email protected]entClassLoader@84507ed@alive incompatible with interface com.sapportals.portal.pcd.gl.IPcdContext:sap.com/[email protected]der@f46d103@alive ". Code snippet is as given below at the end of the message.
1) I tried different ways to have a lookup and always gave message as "look up not found" and for pcd:portal_content came up with above error.
2) Once I read the UCD context, I would like to store some values based on user selection and store them. User may change the values whenever they like and I will be using the values for other purposes in another application.
3) Has any one successful in setting and reading UCD Context in NW 7.3. Will it be possible to share such sample code as the code snippets at http://help.sap.com/saphelp_nw73ehp1/helpdata/en/4a/8e1bce28e24dd8abd9f4de05e5587d/content.htm are not much of use unless I am able to read the UCD.
Thanks for your help!
Regards,
Raju
TestingUCD is my test application and the following is code snippet
InitialContext initialContext = null;
IPcdContext pcdCtx;
Hashtable env = new Hashtable();
env.put(UCD_INITIAL_CONTEXT_FACTORY, UCD_INITIAL_CONTEXT_FACTORY);
env.put(Context.SECURITY_PRINCIPAL, request.getUser());
env.put(Constants.REQUESTED_ASPECT, IPcdAttribute.PERSISTENCY_ASPECT);
try{
initialContext = new InitialContext(env);
//response.write("Before pcdCtx lookup");
try {
pcdCtx = (com.sapportals.portal.pcd.gl.PcdGlContext) initialContext.lookup("pcd:portal_content");
} catch(Exception e){
response.write("Some problem with lookup" + e.getMessage());

Hi,
There are quite few differences in the standard code snippet given by SAP Help on UCD and the once that you put above in the question.
Below is standard snippet.
Hashtable<Object, Object> env = new Hashtable<Object, Object>();
env.put(Context.INITIAL_CONTEXT_FACTORY,
IPcdContext.UCD_INITIAL_CONTEXT_FACTORY);
env.put(Context.SECURITY_PRINCIPAL, user);
InitialContext ctx = new InitialContext(env);
pcdCtx = (IPcdContext) ctx.lookup("");
============================
Check the ones highlighted in BOLD and compare them in your code. In your code when ur doing initial lookup you are not using the Correct class type cast for the returned lookup object!
Your code shows as below:
pcdCtx = (com.sapportals.portal.pcd.gl.PcdGlContext) initialContext.lookup("pcd:portal_content");
But may be it shd have been something like below:
pcdCtx = (IPcdContext) initialContext.lookup("pcd:portal_content");
Pls verify and hopefully this resolves your issues around look up.
Thanks,
Swapna Priya.

NOT Getting Values for LOCATION...on MultiProvider REPORT

HI All,
I have a MultiProvider on 4 cubes.All these 4 cubes having object LOCATION. I can see data in all cubes for LOCATION. I am running a report on this MultiProvider.
Problem:
I am not getting Values for LOCATION. Why?
What I did:
I checked all location objects of all 4 cubes @ MultiProvider level .
I didn't use any Infoprovider in Qry designer sections.
Please suggest. What is the reason how to solve..
THanks & Regards.
Sri.
Edited by: siri26 k on Dec 5, 2008 10:41 AM
Edited by: siri26 k on Dec 5, 2008 10:41 AM

hello,
in the identification tab of the MP,make sure you have checked all four checkboxes across the 4 infoproviders.
then in Listcube T-Code, select your MP,display the records based on selection inputs and see if location is populated.
If the data is not coming in listcube, then it will not come in the Query too.
Reg,
Dhanya

Can not input data when removed the value for seleciton condition

Dear Experts,
We met a very strange issue for the IP.
We create a aggregation level and relatd query for user to key in data.
We have a filter in the aggregation level.
It will set value for A,B,C,D
When user opent he report, system will require user to key in the value for A,B,C,D.
Now we found that if we key in value for B, cell is input ready.
If we removed the value in for the B in the selection condition (I mean the value of B is empty, this means tha all the value of B will display in the report), we can not key in data.
Could you kindly let me kow the reason?
Thanks and best regards
Alex yang

Dear Experts,
Many thanks for your information.
I know the principle for the IP.
But I think you may misunderstanding this issue due to my incorrect explaination.
First, we think the aggreagtion level is ok. This is due to that for the B in my example, we set its as column value in the query.
This is means for each record in the IP query, it has only one B value to reflect it.
But strange things is that if we set fixed value for B, IP input is ok.
If we removed fixed value for B, IP function is error.
Now, we will test if we key in multi value for B whether IP input function is ok or not.
Any update, I will inform you.
Thanks and best regards
Alex yang

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

NVDIA compatability? Value for money?

Similar Messages

Maybe you are looking for