Nvida and nouveau in harmony?

I know it's supposed to be a real no-no, but I was wondering if there was any way to run nvidia's proprietary drivers and nouveau on the same machine. I'd really like to have KMS because I use the ttys a lot, but I also want to play nexuiz and assaultcube every now and then. Is this possible though some method like keeping two kernels? I'd be okay with rebooting to switch drivers, maybe even with editing xorg.conf.d/ .

Gusar wrote:
ngoonee wrote:You'd need to replace symlinks for libgl I believe, since the nvidia drivers provide their own and nouveau uses 'standard' libgl.
The nvidia libs and libgl clash, yeah, but if you use nouveau just for the framebuffer console, you don't need libgl installed in the first place.
Hmm, doubt that was the OP's intent, somehow

Similar Messages

Issue with MacBook Air and nouveau

Hi.
I've installed Arch Linux on MacBook Air with Nvidia 320M videocard. Proprietary nvidia driver does not work at all and nouveau has video artefacts (photo attached because screenshot pictures haven't any problems): horizontal noisy black lines and wrong colors on the left two thirds of screen.
/var/log/Xorg.0.log
[ 4.374]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 4.374]
X.Org X Server 1.11.99.903 (1.12.0 RC 3)
Release Date: 2012-02-11
[ 4.374] X Protocol Version 11, Revision 0
[ 4.374] Build Operating System: Linux 3.2.6-2-ARCH x86_64
[ 4.374] Current Operating System: Linux nikimac 3.2.6-2-ARCH #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012 x86_64
[ 4.374] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/disk/by-uuid/639277e8-a2f3-4313-b3e6-81eeb1453e85 ro init=/bin/systemd quiet
[ 4.374] Build Date: 18 February 2012 05:06:59PM
[ 4.374]
[ 4.374] Current version of pixman: 0.24.4
[ 4.374] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.374] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.374] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 21 16:55:39 2012
[ 4.380] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.382] (==) No Layout section. Using the first Screen section.
[ 4.382] (==) No screen section available. Using defaults.
[ 4.382] (**) |-->Screen "Default Screen Section" (0)
[ 4.382] (**) | |-->Monitor "<default monitor>"
[ 4.382] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.382] (==) Automatically adding devices
[ 4.382] (==) Automatically enabling devices
[ 4.392] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4.393] Entry deleted from font path.
[ 4.402] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4.402] Entry deleted from font path.
[ 4.402] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4.402] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4.402] Entry deleted from font path.
[ 4.402] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4.402] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 4.402] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.402] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.402] (II) Loader magic: 0x7cf1e0
[ 4.402] (II) Module ABI versions:
[ 4.402] X.Org ANSI C Emulation: 0.4
[ 4.402] X.Org Video Driver: 12.0
[ 4.402] X.Org XInput driver : 16.0
[ 4.402] X.Org Server Extension : 6.0
[ 4.404] (--) PCI:*(0:2:0:0) 10de:08a3:106b:00d3 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072
[ 4.404] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4.404] (II) LoadModule: "extmod"
[ 4.414] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 4.415] (II) Module extmod: vendor="X.Org Foundation"
[ 4.415] compiled for 1.11.99.903, module version = 1.0.0
[ 4.415] Module class: X.Org Server Extension
[ 4.415] ABI class: X.Org Server Extension, version 6.0
[ 4.415] (II) Loading extension MIT-SCREEN-SAVER
[ 4.415] (II) Loading extension XFree86-VidModeExtension
[ 4.415] (II) Loading extension XFree86-DGA
[ 4.415] (II) Loading extension DPMS
[ 4.415] (II) Loading extension XVideo
[ 4.415] (II) Loading extension XVideo-MotionCompensation
[ 4.415] (II) Loading extension X-Resource
[ 4.415] (II) LoadModule: "dbe"
[ 4.415] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 4.416] (II) Module dbe: vendor="X.Org Foundation"
[ 4.416] compiled for 1.11.99.903, module version = 1.0.0
[ 4.416] Module class: X.Org Server Extension
[ 4.416] ABI class: X.Org Server Extension, version 6.0
[ 4.416] (II) Loading extension DOUBLE-BUFFER
[ 4.416] (II) LoadModule: "glx"
[ 4.416] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.419] (II) Module glx: vendor="X.Org Foundation"
[ 4.419] compiled for 1.11.99.903, module version = 1.0.0
[ 4.419] ABI class: X.Org Server Extension, version 6.0
[ 4.419] (==) AIGLX enabled
[ 4.419] (II) Loading extension GLX
[ 4.420] (II) LoadModule: "record"
[ 4.420] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 4.420] (II) Module record: vendor="X.Org Foundation"
[ 4.420] compiled for 1.11.99.903, module version = 1.13.0
[ 4.420] Module class: X.Org Server Extension
[ 4.420] ABI class: X.Org Server Extension, version 6.0
[ 4.420] (II) Loading extension RECORD
[ 4.420] (II) LoadModule: "dri"
[ 4.421] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 4.422] (II) Module dri: vendor="X.Org Foundation"
[ 4.422] compiled for 1.11.99.903, module version = 1.0.0
[ 4.422] ABI class: X.Org Server Extension, version 6.0
[ 4.422] (II) Loading extension XFree86-DRI
[ 4.422] (II) LoadModule: "dri2"
[ 4.423] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 4.425] (II) Module dri2: vendor="X.Org Foundation"
[ 4.425] compiled for 1.11.99.903, module version = 1.2.0
[ 4.425] ABI class: X.Org Server Extension, version 6.0
[ 4.425] (II) Loading extension DRI2
[ 4.425] (==) Matched nouveau as autoconfigured driver 0
[ 4.425] (==) Matched nvidia as autoconfigured driver 1
[ 4.425] (==) Matched nv as autoconfigured driver 2
[ 4.425] (==) Matched vesa as autoconfigured driver 3
[ 4.425] (==) Matched fbdev as autoconfigured driver 4
[ 4.425] (==) Assigned the driver to the xf86ConfigLayout
[ 4.425] (II) LoadModule: "nouveau"
[ 4.425] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 4.429] (II) Module nouveau: vendor="X.Org Foundation"
[ 4.429] compiled for 1.11.99.902, module version = 0.0.16
[ 4.429] Module class: X.Org Video Driver
[ 4.429] ABI class: X.Org Video Driver, version 12.0
[ 4.429] (II) LoadModule: "nvidia"
[ 4.429] (WW) Warning, couldn't open module nvidia
[ 4.429] (II) UnloadModule: "nvidia"
[ 4.429] (II) Unloading nvidia
[ 4.429] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 4.429] (II) LoadModule: "nv"
[ 4.429] (WW) Warning, couldn't open module nv
[ 4.429] (II) UnloadModule: "nv"
[ 4.429] (II) Unloading nv
[ 4.429] (EE) Failed to load module "nv" (module does not exist, 0)
[ 4.429] (II) LoadModule: "vesa"
[ 4.429] (WW) Warning, couldn't open module vesa
[ 4.429] (II) UnloadModule: "vesa"
[ 4.429] (II) Unloading vesa
[ 4.429] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4.430] (II) LoadModule: "fbdev"
[ 4.430] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 4.431] (II) Module fbdev: vendor="X.Org Foundation"
[ 4.431] compiled for 1.11.99.903, module version = 0.4.2
[ 4.431] ABI class: X.Org Video Driver, version 12.0
[ 4.431] (II) NOUVEAU driver
[ 4.431] (II) NOUVEAU driver for NVIDIA chipset families :
[ 4.431] RIVA TNT (NV04)
[ 4.431] RIVA TNT2 (NV05)
[ 4.431] GeForce 256 (NV10)
[ 4.431] GeForce 2 (NV11, NV15)
[ 4.431] GeForce 4MX (NV17, NV18)
[ 4.431] GeForce 3 (NV20)
[ 4.431] GeForce 4Ti (NV25, NV28)
[ 4.431] GeForce FX (NV3x)
[ 4.431] GeForce 6 (NV4x)
[ 4.432] GeForce 7 (G7x)
[ 4.432] GeForce 8 (G8x)
[ 4.432] GeForce GTX 200 (NVA0)
[ 4.432] GeForce GTX 400 (NVC0)
[ 4.432] (II) FBDEV: driver for framebuffer: fbdev
[ 4.432] (++) using VT number 7
[ 4.437] drmOpenDevice: node name is /dev/dri/card0
[ 5.343] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
[ 5.343] drmOpenDevice: node name is /dev/dri/card0
[ 5.343] drmOpenDevice: open result is 7, (OK)
[ 5.343] drmOpenByBusid: drmOpenMinor returns 7
[ 5.343] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
[ 5.343] (II) [drm] nouveau interface version: 0.0.16
[ 5.343] (WW) Falling back to old probe method for fbdev
[ 5.343] (II) Loading sub module "fbdevhw"
[ 5.343] (II) LoadModule: "fbdevhw"
[ 5.343] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 5.344] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 5.344] compiled for 1.11.99.903, module version = 0.0.2
[ 5.344] ABI class: X.Org Video Driver, version 12.0
[ 5.344] (II) Loading sub module "dri"
[ 5.344] (II) LoadModule: "dri"
[ 5.344] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 5.344] (II) Module dri: vendor="X.Org Foundation"
[ 5.344] compiled for 1.11.99.903, module version = 1.0.0
[ 5.344] ABI class: X.Org Server Extension, version 6.0
[ 5.344] (II) NOUVEAU(0): Loaded DRI module
[ 5.344] drmOpenDevice: node name is /dev/dri/card0
[ 5.344] drmOpenDevice: open result is 8, (OK)
[ 5.344] drmOpenDevice: node name is /dev/dri/card0
[ 5.344] drmOpenDevice: open result is 8, (OK)
[ 5.344] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
[ 5.344] drmOpenDevice: node name is /dev/dri/card0
[ 5.344] drmOpenDevice: open result is 8, (OK)
[ 5.344] drmOpenByBusid: drmOpenMinor returns 8
[ 5.344] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
[ 5.344] (II) [drm] DRM interface version 1.4
[ 5.344] (II) [drm] DRM open master succeeded.
[ 5.344] (--) NOUVEAU(0): Chipset: "NVIDIA NVaf"
[ 5.344] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.344] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 5.344] (==) NOUVEAU(0): RGB weight 888
[ 5.344] (==) NOUVEAU(0): Default visual is TrueColor
[ 5.344] (==) NOUVEAU(0): Using HW cursor
[ 5.344] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 5.345] (==) NOUVEAU(0): Page flipping enabled
[ 5.379] (II) NOUVEAU(0): Output eDP-1 has no monitor section
[ 5.540] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 5.559] (II) NOUVEAU(0): EDID for output eDP-1
[ 5.559] (II) NOUVEAU(0): Manufacturer: APP Model: 9cdf Serial#: 0
[ 5.559] (II) NOUVEAU(0): Year: 2010 Week: 35
[ 5.559] (II) NOUVEAU(0): EDID Version: 1.3
[ 5.559] (II) NOUVEAU(0): Digital Display Input
[ 5.559] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 29 vert.: 18
[ 5.559] (II) NOUVEAU(0): Gamma: 2.20
[ 5.559] (II) NOUVEAU(0): No DPMS capabilities specified
[ 5.559] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 5.559] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 5.559] (II) NOUVEAU(0): redX: 0.593 redY: 0.342 greenX: 0.331 greenY: 0.573
[ 5.559] (II) NOUVEAU(0): blueX: 0.152 blueY: 0.133 whiteX: 0.313 whiteY: 0.329
[ 5.559] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 5.559] (II) NOUVEAU(0): Supported detailed timing:
[ 5.559] (II) NOUVEAU(0): clock: 91.5 MHz Image Size: 286 x 179 mm
[ 5.559] (II) NOUVEAU(0): h_active: 1440 h_sync: 1504 h_sync_end 1546 h_blank_end 1652 h_border: 0
[ 5.559] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
[ 5.559] (II) NOUVEAU(0): Unknown vendor-specific block 1
[ 5.559] (II) NOUVEAU(0): LP133WP1-TPA1
[ 5.559] (II) NOUVEAU(0): Monitor name: Color LCD
[ 5.559] (II) NOUVEAU(0): EDID (in hex):
[ 5.559] (II) NOUVEAU(0): 00ffffffffffff000610df9c00000000
[ 5.559] (II) NOUVEAU(0): 23140103801d12780aef059757549227
[ 5.559] (II) NOUVEAU(0): 22505400000001010101010101010101
[ 5.559] (II) NOUVEAU(0): 010101010101c223a0d450841a30402a
[ 5.559] (II) NOUVEAU(0): 36001eb3100000180000000100061030
[ 5.559] (II) NOUVEAU(0): 00000000000000000a20000000fe004c
[ 5.559] (II) NOUVEAU(0): 503133335750312d54504131000000fc
[ 5.559] (II) NOUVEAU(0): 00436f6c6f72204c43440a202020001f
[ 5.559] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 5.559] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 5.559] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 5.559] (II) NOUVEAU(0): Printing probed modes for output eDP-1
[ 5.559] (II) NOUVEAU(0): Modeline "1440x900"x59.8 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 5.559] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 5.559] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 5.559] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 5.560] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 5.560] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 5.560] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 5.560] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 5.720] (II) NOUVEAU(0): EDID for output DP-1
[ 5.720] (II) NOUVEAU(0): Output eDP-1 connected
[ 5.720] (II) NOUVEAU(0): Output DP-1 disconnected
[ 5.720] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 5.720] (II) NOUVEAU(0): Output eDP-1 using initial mode 1440x900
[ 5.720] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 5.720] (--) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
[ 5.720] (**) NOUVEAU(0): Driver mode "1440x900": 91.5 MHz (scaled from 0.0 MHz), 55.4 kHz, 59.8 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "1440x900"x59.8 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 5.720] (**) NOUVEAU(0): Driver mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 5.720] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 5.720] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 5.720] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 5.720] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 5.720] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 5.720] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 5.720] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 5.720] (**) NOUVEAU(0): Display dimensions: (290, 180) mm
[ 5.720] (**) NOUVEAU(0): DPI set to (126, 127)
[ 5.720] (II) Loading sub module "fb"
[ 5.720] (II) LoadModule: "fb"
[ 5.720] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.721] (II) Module fb: vendor="X.Org Foundation"
[ 5.721] compiled for 1.11.99.903, module version = 1.0.0
[ 5.721] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.721] (II) Loading sub module "exa"
[ 5.721] (II) LoadModule: "exa"
[ 5.722] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 5.722] (II) Module exa: vendor="X.Org Foundation"
[ 5.722] compiled for 1.11.99.903, module version = 2.5.0
[ 5.722] ABI class: X.Org Video Driver, version 12.0
[ 5.722] (II) Loading sub module "shadowfb"
[ 5.722] (II) LoadModule: "shadowfb"
[ 5.722] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 5.723] (II) Module shadowfb: vendor="X.Org Foundation"
[ 5.723] compiled for 1.11.99.903, module version = 1.0.0
[ 5.723] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.723] (II) UnloadModule: "fbdev"
[ 5.723] (II) Unloading fbdev
[ 5.723] (II) UnloadSubModule: "fbdevhw"
[ 5.723] (II) Unloading fbdevhw
[ 5.723] (--) Depth 24 pixmap format is 32 bpp
[ 5.728] (II) NOUVEAU(0): Opened GPU channel 2
[ 5.728] (II) NOUVEAU(0): [DRI2] Setup complete
[ 5.728] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 5.728] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 5.729] (II) NOUVEAU(0): GART: 64MiB available
[ 5.736] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[ 5.738] (II) EXA(0): Driver allocated offscreen pixmaps
[ 5.738] (II) EXA(0): Driver registered support for the following operations:
[ 5.738] (II) Solid
[ 5.738] (II) Copy
[ 5.738] (II) Composite (RENDER acceleration)
[ 5.738] (II) UploadToScreen
[ 5.738] (II) DownloadFromScreen
[ 5.738] (==) NOUVEAU(0): Backing store disabled
[ 5.738] (==) NOUVEAU(0): Silken mouse enabled
[ 5.738] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 5.738] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 5.738] (==) NOUVEAU(0): DPMS enabled
[ 5.738] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5.738] (--) RandR disabled
[ 5.738] (II) Initializing built-in extension Generic Event Extension
[ 5.738] (II) Initializing built-in extension SHAPE
[ 5.738] (II) Initializing built-in extension MIT-SHM
[ 5.738] (II) Initializing built-in extension XInputExtension
[ 5.738] (II) Initializing built-in extension XTEST
[ 5.738] (II) Initializing built-in extension BIG-REQUESTS
[ 5.738] (II) Initializing built-in extension SYNC
[ 5.738] (II) Initializing built-in extension XKEYBOARD
[ 5.738] (II) Initializing built-in extension XC-MISC
[ 5.738] (II) Initializing built-in extension SECURITY
[ 5.738] (II) Initializing built-in extension XINERAMA
[ 5.738] (II) Initializing built-in extension XFIXES
[ 5.738] (II) Initializing built-in extension RENDER
[ 5.738] (II) Initializing built-in extension RANDR
[ 5.738] (II) Initializing built-in extension COMPOSITE
[ 5.738] (II) Initializing built-in extension DAMAGE
[ 5.799] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 5.799] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 5.799] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 5.799] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 5.800] (II) AIGLX: Loaded and initialized nouveau
[ 5.800] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.805] (II) NOUVEAU(0): NVEnterVT is called.
[ 6.217] (II) NOUVEAU(0): Setting screen physical size to 381 x 238
[ 6.217] resize called 1440 900
[ 6.272] (II) XKB: Reusing cached keymap
[ 6.274] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 6.274] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.274] (II) LoadModule: "evdev"
[ 6.274] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.275] (II) Module evdev: vendor="X.Org Foundation"
[ 6.275] compiled for 1.11.99.902, module version = 2.6.99
[ 6.275] Module class: X.Org XInput Driver
[ 6.275] ABI class: X.Org XInput driver, version 16.0
[ 6.275] (II) Using input driver 'evdev' for 'Power Button'
[ 6.275] Option "XkbRules" "evdev"
[ 6.275] Option "XkbModel" "evdev"
[ 6.275] Option "XkbLayout" "us"
[ 6.275] Option "_source" "server/udev"
[ 6.275] Option "name" "Power Button"
[ 6.275] Option "path" "/dev/input/event3"
[ 6.275] Option "device" "/dev/input/event3"
[ 6.275] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 6.275] Option "driver" "evdev"
[ 6.275] (**) Power Button: always reports core events
[ 6.275] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 6.275] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.275] (--) evdev: Power Button: Found keys
[ 6.275] (II) evdev: Power Button: Configuring as keyboard
[ 6.275] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 6.275] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.275] (**) Option "xkb_rules" "evdev"
[ 6.275] (**) Option "xkb_model" "evdev"
[ 6.275] (**) Option "xkb_layout" "us"
[ 6.301] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 6.301] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 6.301] (II) Using input driver 'evdev' for 'Video Bus'
[ 6.301] Option "XkbRules" "evdev"
[ 6.301] Option "XkbModel" "evdev"
[ 6.301] Option "XkbLayout" "us"
[ 6.301] Option "_source" "server/udev"
[ 6.301] Option "name" "Video Bus"
[ 6.301] Option "path" "/dev/input/event4"
[ 6.301] Option "device" "/dev/input/event4"
[ 6.301] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input4/event4"
[ 6.301] Option "driver" "evdev"
[ 6.301] (**) Video Bus: always reports core events
[ 6.301] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 6.301] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 6.301] (--) evdev: Video Bus: Found keys
[ 6.301] (II) evdev: Video Bus: Configuring as keyboard
[ 6.301] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input4/event4"
[ 6.301] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 6.301] (**) Option "xkb_rules" "evdev"
[ 6.301] (**) Option "xkb_model" "evdev"
[ 6.301] (**) Option "xkb_layout" "us"
[ 6.301] (II) XKB: Reusing cached keymap
[ 6.301] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 6.302] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.302] (II) Using input driver 'evdev' for 'Power Button'
[ 6.302] Option "XkbRules" "evdev"
[ 6.302] Option "XkbModel" "evdev"
[ 6.302] Option "XkbLayout" "us"
[ 6.302] Option "_source" "server/udev"
[ 6.302] Option "name" "Power Button"
[ 6.302] Option "path" "/dev/input/event1"
[ 6.302] Option "device" "/dev/input/event1"
[ 6.302] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 6.302] Option "driver" "evdev"
[ 6.302] (**) Power Button: always reports core events
[ 6.302] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 6.302] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.302] (--) evdev: Power Button: Found keys
[ 6.302] (II) evdev: Power Button: Configuring as keyboard
[ 6.302] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 6.302] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 6.302] (**) Option "xkb_rules" "evdev"
[ 6.302] (**) Option "xkb_model" "evdev"
[ 6.302] (**) Option "xkb_layout" "us"
[ 6.302] (II) XKB: Reusing cached keymap
[ 6.302] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 6.302] (II) No input driver specified, ignoring this device.
[ 6.302] (II) This device may have been added with another device file.
[ 6.302] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 6.302] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 6.302] (II) Using input driver 'evdev' for 'Sleep Button'
[ 6.302] Option "XkbRules" "evdev"
[ 6.303] Option "XkbModel" "evdev"
[ 6.303] Option "XkbLayout" "us"
[ 6.303] Option "_source" "server/udev"
[ 6.303] Option "name" "Sleep Button"
[ 6.303] Option "path" "/dev/input/event2"
[ 6.303] Option "device" "/dev/input/event2"
[ 6.303] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 6.303] Option "driver" "evdev"
[ 6.303] (**) Sleep Button: always reports core events
[ 6.303] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 6.303] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 6.303] (--) evdev: Sleep Button: Found keys
[ 6.303] (II) evdev: Sleep Button: Configuring as keyboard
[ 6.303] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 6.303] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 6.303] (**) Option "xkb_rules" "evdev"
[ 6.303] (**) Option "xkb_model" "evdev"
[ 6.303] (**) Option "xkb_layout" "us"
[ 6.303] (II) XKB: Reusing cached keymap
[ 6.303] (II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event10)
[ 6.303] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
[ 6.303] (II) Using input driver 'evdev' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
[ 6.303] Option "XkbRules" "evdev"
[ 6.303] Option "XkbModel" "evdev"
[ 6.303] Option "XkbLayout" "us"
[ 6.303] Option "_source" "server/udev"
[ 6.303] Option "name" "Apple Inc. Apple Internal Keyboard / Trackpad"
[ 6.303] Option "path" "/dev/input/event10"
[ 6.303] Option "device" "/dev/input/event10"
[ 6.303] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/input/input10/event10"
[ 6.304] Option "driver" "evdev"
[ 6.304] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
[ 6.304] (**) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Device: "/dev/input/event10"
[ 6.304] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Vendor 0x5ac Product 0x240
[ 6.304] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Found keys
[ 6.304] (II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Configuring as keyboard
[ 6.304] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/input/input10/event10"
[ 6.304] (II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 10)
[ 6.304] (**) Option "xkb_rules" "evdev"
[ 6.304] (**) Option "xkb_model" "evdev"
[ 6.304] (**) Option "xkb_layout" "us"
[ 6.304] (II) XKB: Reusing cached keymap
[ 6.304] (II) config/udev: Adding input device bcm5974 (/dev/input/event6)
[ 6.304] (**) bcm5974: Applying InputClass "evdev touchpad catchall"
[ 6.304] (**) bcm5974: Applying InputClass "Multitouch Touchpad"
[ 6.304] (II) LoadModule: "multitouch"
[ 6.304] (II) Loading /usr/lib/xorg/modules/input/multitouch.so
[ 6.305] (II) Module multitouch: vendor="X.Org Foundation"
[ 6.305] compiled for 1.11.99.903, module version = 0.1.0
[ 6.305] Module class: X.Org XInput Driver
[ 6.305] ABI class: X.Org XInput driver, version 16.0
[ 6.305] (II) Using input driver 'multitouch' for 'bcm5974'
[ 6.305] Option "_source" "server/udev"
[ 6.305] Option "name" "bcm5974"
[ 6.305] Option "path" "/dev/input/event6"
[ 6.305] Option "device" "/dev/input/event6"
[ 6.305] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6/event6"
[ 6.305] Option "driver" "multitouch"
[ 6.305] (**) bcm5974: always reports core events
[ 6.306] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6/event6"
[ 6.306] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 11)
[ 6.306] (II) device control: init
[ 6.306] (**) Option "Device" "/dev/input/event6"
[ 6.311] (II) multitouch: devname: bcm5974
[ 6.311] (II) multitouch: devid: 5ac 240 1
[ 6.311] (II) multitouch: caps: left mtdata ibt
[ 6.311] (II) multitouch: 0: min: 0 max: 2048
[ 6.311] (II) multitouch: 1: min: 0 max: 2048
[ 6.311] (II) multitouch: 2: min: 0 max: 2048
[ 6.311] (II) multitouch: 3: min: 0 max: 2048
[ 6.311] (II) multitouch: 4: min: -16384 max: 16384
[ 6.311] (II) multitouch: 5: min: -4620 max: 5140
[ 6.311] (II) multitouch: 6: min: -150 max: 6600
[ 6.336] (II) pointer_control
[ 6.336] (**) bcm5974: (accel) keeping acceleration scheme 1
[ 6.336] (II) pointer_property
[ 6.336] (II) pointer_property
[ 6.336] (**) bcm5974: (accel) acceleration profile 0
[ 6.336] (II) pointer_property
[ 6.336] (II) pointer_property
[ 6.336] (**) bcm5974: (accel) acceleration factor: 2.000
[ 6.336] (**) bcm5974: (accel) acceleration threshold: 4
[ 6.337] (II) device control: on
[ 6.337] (**) Option "Device" "/dev/input/event6"
[ 6.342] (II) pointer_property
[ 6.342] (II) pointer_property
[ 6.342] (II) config/udev: Adding input device bcm5974 (/dev/input/mouse0)
[ 6.342] (**) bcm5974: Applying InputClass "Multitouch Touchpad"
[ 6.342] (II) Using input driver 'multitouch' for 'bcm5974'
[ 6.342] Option "_source" "server/udev"
[ 6.342] Option "name" "bcm5974"
[ 6.342] Option "path" "/dev/input/mouse0"
[ 6.342] Option "device" "/dev/input/mouse0"
[ 6.342] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6/mouse0"
[ 6.342] Option "driver" "multitouch"
[ 6.342] (**) bcm5974: always reports core events
[ 6.342] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6/mouse0"
[ 6.342] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 12)
[ 6.342] (II) device control: init
[ 6.342] (**) Option "Device" "/dev/input/mouse0"
[ 6.342] (EE) multitouch: cannot configure device
[ 6.342] (EE) Couldn't init device "bcm5974"
[ 6.342] (II) UnloadModule: "multitouch"
[ 6.342] (II) config/udev: Adding input device Built-in iSight (/dev/input/event9)
[ 6.342] (**) Built-in iSight: Applying InputClass "evdev keyboard catchall"
[ 6.342] (II) Using input driver 'evdev' for 'Built-in iSight'
[ 6.342] Option "XkbRules" "evdev"
[ 6.343] Option "XkbModel" "evdev"
[ 6.343] Option "XkbLayout" "us"
[ 6.343] Option "_source" "server/udev"
[ 6.343] Option "name" "Built-in iSight"
[ 6.343] Option "path" "/dev/input/event9"
[ 6.343] Option "device" "/dev/input/event9"
[ 6.343] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input9/event9"
[ 6.343] Option "driver" "evdev"
[ 6.343] (**) Built-in iSight: always reports core events
[ 6.343] (**) evdev: Built-in iSight: Device: "/dev/input/event9"
[ 6.343] (--) evdev: Built-in iSight: Vendor 0x5ac Product 0x850a
[ 6.343] (--) evdev: Built-in iSight: Found keys
[ 6.343] (II) evdev: Built-in iSight: Configuring as keyboard
[ 6.343] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input9/event9"
[ 6.343] (II) XINPUT: Adding extended input device "Built-in iSight" (type: KEYBOARD, id 12)
[ 6.343] (**) Option "xkb_rules" "evdev"
[ 6.343] (**) Option "xkb_model" "evdev"
[ 6.343] (**) Option "xkb_layout" "us"
[ 6.343] (II) XKB: Reusing cached keymap
[ 6.343] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event7)
[ 6.343] (II) No input driver specified, ignoring this device.
[ 6.343] (II) This device may have been added with another device file.
[ 6.343] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
[ 6.343] (II) No input driver specified, ignoring this device.
[ 6.343] (II) This device may have been added with another device file.
[ 6.344] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[ 6.344] (II) No input driver specified, ignoring this device.
[ 6.344] (II) This device may have been added with another device file.
[ 6.344] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 6.344] (II) No input driver specified, ignoring this device.
[ 6.344] (II) This device may have been added with another device file.
[ 6.369] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 6.369] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 6.369] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 7.550] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 7.550] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 7.550] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 7.754] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 7.754] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 7.754] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 7.963] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 7.963] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 7.963] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 8.165] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 8.165] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 8.165] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 8.364] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 8.364] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 8.364] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 16.133] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 16.133] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.133] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 16.359] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 16.359] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.359] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 16.560] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 16.560] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.560] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 16.760] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 16.760] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.760] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 16.961] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 16.961] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.961] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 17.159] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 17.159] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 17.159] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 18.008] (II) pointer_control
[ 18.830] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 18.830] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 18.830] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
nvidiafb works fine, but it has no dri and has problems with suspend.
How to resolve this problem with nouveau? Is it crtc-related or not? Playing with xrandr does not have any effect (except resolution change).
Last edited by nikicat (2012-02-22 15:00:18)

I had an issue with my MBA seeing my HP printer and could find no good reason for the issue. In the end I deleted the printers WiFi connection and then turned around and set it up on my WiFi network all over again. My MBA now finds the printer every time. Okay ...so I don't actually know why it didn't work the first time, but it does now. Again, there was no apparent issue with either the HP printer or the MBA being connected to WiFi in the first place, but something different must have occurred in software/hardware the second time.

Xorg with Both Radeon and Nouveau Cards

I seem to be having a problem getting my two cards to play nice with each other. They will both work by themselves and are detected properly. I seem to have a mistake in my configuration file when configuring the second screen. I did start with the example from the Xorg wiki page. If someone could please take a look at my Xorg.conf file and spot my error, I would appreciate it.
I am using the OSS drivers first, but would like to use the proprietary nVidia driver once I get this working, but one step at a time.
Video Card Information:
$ lspci | grep VGA
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3200 Graphics
02:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600 GTS] (rev a1)
Errors after running "init 5" with the ATI card first (full xorg.conf & Xorg.0.log):
# cat Xorg.0.log | grep EE
[ 1133.326] Current Operating System: Linux atw-01 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1133.337] (II) Loading extension MIT-SCREEN-SAVER
[ 1133.350] (EE) Screen 1 deleted because of no matching config section.
[ 1133.867] (EE) Logitech Logitech Illuminated Keyboard: failed to initialize for relative axes.
Errors after running "init 5" with the nVidia card first (full xorg.conf & Xorg.0.log):
# cat Xorg.0.log | grep EE
[ 2307.780] Current Operating System: Linux atw-01 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2307.791] (II) Loading extension MIT-SCREEN-SAVER
[ 2307.803] (EE) Screen 1 deleted because of no matching config section.
[ 2308.587] (EE) Logitech Logitech Illuminated Keyboard: failed to initialize for relative axes.
When I look at the log file, it seems to load both cards OK, but then it always unloads the second one after the "(EE) Screen 1 deleted because of no matching config section." entry.

So it seems that nouveau only supports dual head using Randr (source). I removed the "Screen x" lines from 10-monitor.conf and both cards fired up at once. So, it looks like I will need to try this using the driver from Nvidia.
What's interesting is that I cannot have the proprietary Nvidia driver with xf86-video-ati, even though it is shown here. Am I missing something here or is that wiki section in error?
I will try using an alternate ATI driver tomorrow.
$ sudo pacman -S xf86-video-ati
resolving dependencies...
looking for inter-conflicts...
:: libgl and nvidia-utils are in conflict. Remove nvidia-utils? [y/N]

Xorg-server 1.6.3.901-1 and nouveau on 7600 Go = crash

Hi !
I updated this morning and now that xorg-server and libdrm (maybe the culprit ?) are up to date X won't start with nouveau
It works if I go back to nvidia.
What should I do ? Who should I contact ?
Thanks Bye !

You're right Nephete but i didn't consider this post as a "help me compiling nouveau".
nv_accel_common.c: In function 'NVAccelInitContextSurfaces':
nv_accel_common.c:48: erreur: 'NV_10' undeclared (first use in this function)
nv_accel_common.c:48: erreur: (Each undeclared identifier is reported only once
nv_accel_common.c:48: erreur: for each function it appears in.)
make[2]: *** [nv_accel_common.lo] Erreur 1
make[2]: *** Attente des tâches non terminées....
mv -f .deps/nv_cursor.Tpo .deps/nv_cursor.Plo
make[2]: quittant le répertoire « /home/bruno/abs/xf86-video-nouveau/src/xf86-video-nouveau-20090612/src »
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le répertoire « /home/bruno/abs/xf86-video-nouveau/src/xf86-video-nouveau-20090612 »
make: *** [all] Erreur 2

Desktop freeze since Nouveau (and "nouveau E[PDISP] " errors in dmesg)

I've switched to Nouveau recently (for reasons I won't get into here). Since then, my frame rate has been disappointing, which I mention in another thread (GPU info and glxinfo there). More importantly, however, after a few hours of use, my desktop will freeze up. Here is some info inspired by the HangDiagnosis page:
My display is frozen in X, but mouse cursor can still move. Sound is still playing in the background if a media player / YouTube was still running. Sometimes, I can still go to another terminal with Ctrl-Alt-F2, sometimes not. One time when I could, I restarted X and it would just work again.
I would very much appreciate some help diagnosing and (dare I say it) solving this problem!
Edit 1: There are some errors in dmesg after booting that seem very revealing (though I myself can make head nor tail of them):
mhelvens@mhelvens-pc ~ % dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.2-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Thu May 7 06:47:54 CEST 2015
[ 0.000000] Command line: initrd=\initramfs-linux.img rw root=/dev/disk/by-label/root resume=/dev/disk/by-label/swap
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7001fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7002000-0x00000000b7008fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7009000-0x00000000b7450fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7451000-0x00000000b7a61fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7a62000-0x00000000c90b9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c90ba000-0x00000000c914bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c914c000-0x00000000c9196fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9197000-0x00000000c92d5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c92d6000-0x00000000c9ffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xb51b0018-0xb51bf657] usable ==> usable
[ 0.000000] e820: update [mem 0xb519f018-0xb51af057] usable ==> usable
[ 0.000000] e820: update [mem 0xb518e018-0xb519e657] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b518e017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b518e018-0x00000000b519e657] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b519e658-0x00000000b519f017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b519f018-0x00000000b51af057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b51af058-0x00000000b51b0017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b51b0018-0x00000000b51bf657] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b51bf658-0x00000000b7001fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b7002000-0x00000000b7008fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000b7009000-0x00000000b7450fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b7451000-0x00000000b7a61fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000b7a62000-0x00000000c90b9fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c90ba000-0x00000000c914bfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c914c000-0x00000000c9196fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c9197000-0x00000000c92d5fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000c92d6000-0x00000000c9ffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000082fdfffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xc929f000 ACPI=0xc929f000 SMBIOS=0xf04d0 MPS=0xfd550
[ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000008000-0x000000000000e000) (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000000000e000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000005f000) (0MB)
[ 0.000000] efi: mem05: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000000005f000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem06: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem07: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem09: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x0000000001e28000) (14MB)
[ 0.000000] efi: mem10: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001e28000-0x000000007fc9d000) (2014MB)
[ 0.000000] efi: mem11: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007fc9d000-0x0000000080000000) (3MB)
[ 0.000000] efi: mem12: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000080000000-0x00000000b3a7f000) (826MB)
[ 0.000000] efi: mem13: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000b3a7f000-0x00000000b3b7f000) (1MB)
[ 0.000000] efi: mem14: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b3b7f000-0x00000000b518e000) (22MB)
[ 0.000000] efi: mem15: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000b518e000-0x00000000b51c0000) (0MB)
[ 0.000000] efi: mem16: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x00000000b51c0000-0x00000000b7002000) (30MB)
[ 0.000000] efi: mem17: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000b7002000-0x00000000b7009000) (0MB)
[ 0.000000] efi: mem18: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b7009000-0x00000000b7163000) (1MB)
[ 0.000000] efi: mem19: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000b7163000-0x00000000b7417000) (2MB)
[ 0.000000] efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b7417000-0x00000000b741d000) (0MB)
[ 0.000000] efi: mem21: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000b741d000-0x00000000b7421000) (0MB)
[ 0.000000] efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b7421000-0x00000000b7436000) (0MB)
[ 0.000000] efi: mem23: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000b7436000-0x00000000b7448000) (0MB)
[ 0.000000] efi: mem24: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b7448000-0x00000000b7451000) (0MB)
[ 0.000000] efi: mem25: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000b7451000-0x00000000b7a62000) (6MB)
[ 0.000000] efi: mem26: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b7a62000-0x00000000b7a6f000) (0MB)
[ 0.000000] efi: mem27: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b7a6f000-0x00000000b7a76000) (0MB)
[ 0.000000] efi: mem28: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000b7a76000-0x00000000b7a7e000) (0MB)
[ 0.000000] efi: mem29: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b7a7e000-0x00000000ba23a000) (39MB)
[ 0.000000] efi: mem30: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba23a000-0x00000000ba23d000) (0MB)
[ 0.000000] efi: mem31: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba23d000-0x00000000ba36a000) (1MB)
[ 0.000000] efi: mem32: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba36a000-0x00000000ba393000) (0MB)
[ 0.000000] efi: mem33: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba393000-0x00000000ba5ac000) (2MB)
[ 0.000000] efi: mem34: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba5ac000-0x00000000ba5ad000) (0MB)
[ 0.000000] efi: mem35: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba5ad000-0x00000000ba5b5000) (0MB)
[ 0.000000] efi: mem36: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba5b5000-0x00000000ba5b7000) (0MB)
[ 0.000000] efi: mem37: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba5b7000-0x00000000ba5b9000) (0MB)
[ 0.000000] efi: mem38: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba5b9000-0x00000000ba5bb000) (0MB)
[ 0.000000] efi: mem39: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba5bb000-0x00000000ba6e7000) (1MB)
[ 0.000000] efi: mem40: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba6e7000-0x00000000ba710000) (0MB)
[ 0.000000] efi: mem41: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba710000-0x00000000ba925000) (2MB)
[ 0.000000] efi: mem42: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba925000-0x00000000ba926000) (0MB)
[ 0.000000] efi: mem43: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba926000-0x00000000ba92b000) (0MB)
[ 0.000000] efi: mem44: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba92b000-0x00000000ba92c000) (0MB)
[ 0.000000] efi: mem45: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba92c000-0x00000000ba934000) (0MB)
[ 0.000000] efi: mem46: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba934000-0x00000000ba935000) (0MB)
[ 0.000000] efi: mem47: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba935000-0x00000000ba938000) (0MB)
[ 0.000000] efi: mem48: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba938000-0x00000000ba93a000) (0MB)
[ 0.000000] efi: mem49: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba93a000-0x00000000baa65000) (1MB)
[ 0.000000] efi: mem50: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000baa65000-0x00000000baa8e000) (0MB)
[ 0.000000] efi: mem51: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000baa8e000-0x00000000baca6000) (2MB)
[ 0.000000] efi: mem52: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000baca6000-0x00000000baca7000) (0MB)
[ 0.000000] efi: mem53: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000baca7000-0x00000000bacab000) (0MB)
[ 0.000000] efi: mem54: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bacab000-0x00000000bacac000) (0MB)
[ 0.000000] efi: mem55: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bacac000-0x00000000bacb4000) (0MB)
[ 0.000000] efi: mem56: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bacb4000-0x00000000bacb6000) (0MB)
[ 0.000000] efi: mem57: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bacb6000-0x00000000bacc3000) (0MB)
[ 0.000000] efi: mem58: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bacc3000-0x00000000bacc4000) (0MB)
[ 0.000000] efi: mem59: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bacc4000-0x00000000bacc5000) (0MB)
[ 0.000000] efi: mem60: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bacc5000-0x00000000bacc6000) (0MB)
[ 0.000000] efi: mem61: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bacc6000-0x00000000badee000) (1MB)
[ 0.000000] efi: mem62: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000badee000-0x00000000bae17000) (0MB)
[ 0.000000] efi: mem63: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bae17000-0x00000000bb036000) (2MB)
[ 0.000000] efi: mem64: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb036000-0x00000000bb037000) (0MB)
[ 0.000000] efi: mem65: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb037000-0x00000000bb03e000) (0MB)
[ 0.000000] efi: mem66: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb03e000-0x00000000bb040000) (0MB)
[ 0.000000] efi: mem67: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb040000-0x00000000bb047000) (0MB)
[ 0.000000] efi: mem68: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb047000-0x00000000bb048000) (0MB)
[ 0.000000] efi: mem69: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb048000-0x00000000bb05d000) (0MB)
[ 0.000000] efi: mem70: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb05d000-0x00000000bb05e000) (0MB)
[ 0.000000] efi: mem71: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb05e000-0x00000000bb05f000) (0MB)
[ 0.000000] efi: mem72: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb05f000-0x00000000bb060000) (0MB)
[ 0.000000] efi: mem73: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb060000-0x00000000bb189000) (1MB)
[ 0.000000] efi: mem74: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb189000-0x00000000bb1b2000) (0MB)
[ 0.000000] efi: mem75: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb1b2000-0x00000000bb3b0000) (1MB)
[ 0.000000] efi: mem76: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb3b0000-0x00000000bb3b2000) (0MB)
[ 0.000000] efi: mem77: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb3b2000-0x00000000bb3b8000) (0MB)
[ 0.000000] efi: mem78: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb3b8000-0x00000000bb3b9000) (0MB)
[ 0.000000] efi: mem79: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb3b9000-0x00000000bb3c1000) (0MB)
[ 0.000000] efi: mem80: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb3c1000-0x00000000bb3c5000) (0MB)
[ 0.000000] efi: mem81: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb3c5000-0x00000000bb3d4000) (0MB)
[ 0.000000] efi: mem82: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb3d4000-0x00000000bb3d5000) (0MB)
[ 0.000000] efi: mem83: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb3d5000-0x00000000bb3e8000) (0MB)
[ 0.000000] efi: mem84: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb3e8000-0x00000000bb3eb000) (0MB)
[ 0.000000] efi: mem85: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb3eb000-0x00000000bb515000) (1MB)
[ 0.000000] efi: mem86: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb515000-0x00000000bb53e000) (0MB)
[ 0.000000] efi: mem87: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb53e000-0x00000000bb606000) (0MB)
[ 0.000000] efi: mem88: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb606000-0x00000000bb694000) (0MB)
[ 0.000000] efi: mem89: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb694000-0x00000000bb6c7000) (0MB)
[ 0.000000] efi: mem90: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb6c7000-0x00000000bb767000) (0MB)
[ 0.000000] efi: mem91: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb767000-0x00000000bb770000) (0MB)
[ 0.000000] efi: mem92: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb770000-0x00000000bb771000) (0MB)
[ 0.000000] efi: mem93: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb771000-0x00000000bb778000) (0MB)
[ 0.000000] efi: mem94: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb778000-0x00000000bb779000) (0MB)
[ 0.000000] efi: mem95: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb779000-0x00000000bb77b000) (0MB)
[ 0.000000] efi: mem96: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb77b000-0x00000000bb794000) (0MB)
[ 0.000000] efi: mem97: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb794000-0x00000000bb79c000) (0MB)
[ 0.000000] efi: mem98: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb79c000-0x00000000bb7b4000) (0MB)
[ 0.000000] efi: mem99: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb7b4000-0x00000000bb7bd000) (0MB)
[ 0.000000] efi: mem100: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb7bd000-0x00000000bb7da000) (0MB)
[ 0.000000] efi: mem101: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb7da000-0x00000000bb7e4000) (0MB)
[ 0.000000] efi: mem102: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb7e4000-0x00000000bb7fb000) (0MB)
[ 0.000000] efi: mem103: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb7fb000-0x00000000bb803000) (0MB)
[ 0.000000] efi: mem104: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb803000-0x00000000bb821000) (0MB)
[ 0.000000] efi: mem105: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb821000-0x00000000bb827000) (0MB)
[ 0.000000] efi: mem106: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb827000-0x00000000bb84d000) (0MB)
[ 0.000000] efi: mem107: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb84d000-0x00000000bb85d000) (0MB)
[ 0.000000] efi: mem108: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb85d000-0x00000000bb878000) (0MB)
[ 0.000000] efi: mem109: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb878000-0x00000000bb882000) (0MB)
[ 0.000000] efi: mem110: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb882000-0x00000000bb89c000) (0MB)
[ 0.000000] efi: mem111: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb89c000-0x00000000bb8a7000) (0MB)
[ 0.000000] efi: mem112: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb8a7000-0x00000000bb8da000) (0MB)
[ 0.000000] efi: mem113: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb8da000-0x00000000bb8e3000) (0MB)
[ 0.000000] efi: mem114: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb8e3000-0x00000000bb902000) (0MB)
[ 0.000000] efi: mem115: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb902000-0x00000000bb90b000) (0MB)
[ 0.000000] efi: mem116: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb90b000-0x00000000bb92a000) (0MB)
[ 0.000000] efi: mem117: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb92a000-0x00000000bb933000) (0MB)
[ 0.000000] efi: mem118: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb933000-0x00000000bb959000) (0MB)
[ 0.000000] efi: mem119: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb959000-0x00000000bb96a000) (0MB)
[ 0.000000] efi: mem120: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb96a000-0x00000000bb98f000) (0MB)
[ 0.000000] efi: mem121: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb98f000-0x00000000bb99f000) (0MB)
[ 0.000000] efi: mem122: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb99f000-0x00000000bb9bb000) (0MB)
[ 0.000000] efi: mem123: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb9bb000-0x00000000bb9c1000) (0MB)
[ 0.000000] efi: mem124: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb9c1000-0x00000000bba26000) (0MB)
[ 0.000000] efi: mem125: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bba26000-0x00000000bba31000) (0MB)
[ 0.000000] efi: mem126: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bba31000-0x00000000bbb11000) (0MB)
[ 0.000000] efi: mem127: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbb11000-0x00000000bbb19000) (0MB)
[ 0.000000] efi: mem128: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbb19000-0x00000000bbb32000) (0MB)
[ 0.000000] efi: mem129: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbb32000-0x00000000bbb3b000) (0MB)
[ 0.000000] efi: mem130: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbb3b000-0x00000000bbb56000) (0MB)
[ 0.000000] efi: mem131: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbb56000-0x00000000bbb60000) (0MB)
[ 0.000000] efi: mem132: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbb60000-0x00000000bbb77000) (0MB)
[ 0.000000] efi: mem133: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbb77000-0x00000000bbb7f000) (0MB)
[ 0.000000] efi: mem134: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbb7f000-0x00000000bbb9e000) (0MB)
[ 0.000000] efi: mem135: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbb9e000-0x00000000bbba4000) (0MB)
[ 0.000000] efi: mem136: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbba4000-0x00000000bbbcb000) (0MB)
[ 0.000000] efi: mem137: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbbcb000-0x00000000bbbdb000) (0MB)
[ 0.000000] efi: mem138: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbbdb000-0x00000000bbbf6000) (0MB)
[ 0.000000] efi: mem139: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbbf6000-0x00000000bbc00000) (0MB)
[ 0.000000] efi: mem140: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbc00000-0x00000000bbc1b000) (0MB)
[ 0.000000] efi: mem141: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbc1b000-0x00000000bbc26000) (0MB)
[ 0.000000] efi: mem142: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbc26000-0x00000000bbc57000) (0MB)
[ 0.000000] efi: mem143: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbc57000-0x00000000bbc60000) (0MB)
[ 0.000000] efi: mem144: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbc60000-0x00000000bbc81000) (0MB)
[ 0.000000] efi: mem145: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbc81000-0x00000000bbc8a000) (0MB)
[ 0.000000] efi: mem146: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbc8a000-0x00000000bbca9000) (0MB)
[ 0.000000] efi: mem147: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbca9000-0x00000000bbcb2000) (0MB)
[ 0.000000] efi: mem148: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbcb2000-0x00000000bbd0e000) (0MB)
[ 0.000000] efi: mem149: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbd0e000-0x00000000bbd1e000) (0MB)
[ 0.000000] efi: mem150: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbd1e000-0x00000000bbd3a000) (0MB)
[ 0.000000] efi: mem151: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbd3a000-0x00000000bbd40000) (0MB)
[ 0.000000] efi: mem152: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbd40000-0x00000000bbe1f000) (0MB)
[ 0.000000] efi: mem153: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbe1f000-0x00000000bbe28000) (0MB)
[ 0.000000] efi: mem154: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbe28000-0x00000000bbe39000) (0MB)
[ 0.000000] efi: mem155: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbe39000-0x00000000bbe41000) (0MB)
[ 0.000000] efi: mem156: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbe41000-0x00000000bbe8e000) (0MB)
[ 0.000000] efi: mem157: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbe8e000-0x00000000bbe96000) (0MB)
[ 0.000000] efi: mem158: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbe96000-0x00000000bbeb0000) (0MB)
[ 0.000000] efi: mem159: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbeb0000-0x00000000bbeb9000) (0MB)
[ 0.000000] efi: mem160: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbeb9000-0x00000000bbed5000) (0MB)
[ 0.000000] efi: mem161: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbed5000-0x00000000bbedf000) (0MB)
[ 0.000000] efi: mem162: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbedf000-0x00000000bbef6000) (0MB)
[ 0.000000] efi: mem163: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbef6000-0x00000000bbefe000) (0MB)
[ 0.000000] efi: mem164: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbefe000-0x00000000bbf1e000) (0MB)
[ 0.000000] efi: mem165: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbf1e000-0x00000000bbf24000) (0MB)
[ 0.000000] efi: mem166: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbf24000-0x00000000bbf48000) (0MB)
[ 0.000000] efi: mem167: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbf48000-0x00000000bbf4e000) (0MB)
[ 0.000000] efi: mem168: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbf4e000-0x00000000bbf98000) (0MB)
[ 0.000000] efi: mem169: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbf98000-0x00000000bbf99000) (0MB)
[ 0.000000] efi: mem170: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbf99000-0x00000000bbfd5000) (0MB)
[ 0.000000] efi: mem171: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbfd5000-0x00000000bbfde000) (0MB)
[ 0.000000] efi: mem172: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bbfde000-0x00000000bbffe000) (0MB)
[ 0.000000] efi: mem173: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bbffe000-0x00000000bc007000) (0MB)
[ 0.000000] efi: mem174: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc007000-0x00000000bc056000) (0MB)
[ 0.000000] efi: mem175: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc056000-0x00000000bc05c000) (0MB)
[ 0.000000] efi: mem176: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc05c000-0x00000000bc08a000) (0MB)
[ 0.000000] efi: mem177: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc08a000-0x00000000bc090000) (0MB)
[ 0.000000] efi: mem178: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc090000-0x00000000bc0b6000) (0MB)
[ 0.000000] efi: mem179: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc0b6000-0x00000000bc0bc000) (0MB)
[ 0.000000] efi: mem180: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc0bc000-0x00000000bc19d000) (0MB)
[ 0.000000] efi: mem181: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc19d000-0x00000000bc1a5000) (0MB)
[ 0.000000] efi: mem182: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc1a5000-0x00000000bc20d000) (0MB)
[ 0.000000] efi: mem183: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc20d000-0x00000000bc215000) (0MB)
[ 0.000000] efi: mem184: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc215000-0x00000000bc275000) (0MB)
[ 0.000000] efi: mem185: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc275000-0x00000000bc27d000) (0MB)
[ 0.000000] efi: mem186: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc27d000-0x00000000bc29b000) (0MB)
[ 0.000000] efi: mem187: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc29b000-0x00000000bc2a1000) (0MB)
[ 0.000000] efi: mem188: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc2a1000-0x00000000bc2c5000) (0MB)
[ 0.000000] efi: mem189: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc2c5000-0x00000000bc2cb000) (0MB)
[ 0.000000] efi: mem190: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc2cb000-0x00000000bc316000) (0MB)
[ 0.000000] efi: mem191: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc316000-0x00000000bc317000) (0MB)
[ 0.000000] efi: mem192: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc317000-0x00000000bc409000) (0MB)
[ 0.000000] efi: mem193: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc409000-0x00000000bc410000) (0MB)
[ 0.000000] efi: mem194: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc410000-0x00000000bc435000) (0MB)
[ 0.000000] efi: mem195: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc435000-0x00000000bc43b000) (0MB)
[ 0.000000] efi: mem196: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc43b000-0x00000000bc5b0000) (1MB)
[ 0.000000] efi: mem197: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc5b0000-0x00000000bc5b1000) (0MB)
[ 0.000000] efi: mem198: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc5b1000-0x00000000bc5f6000) (0MB)
[ 0.000000] efi: mem199: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc5f6000-0x00000000bc5f7000) (0MB)
[ 0.000000] efi: mem200: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc5f7000-0x00000000bc619000) (0MB)
[ 0.000000] efi: mem201: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc619000-0x00000000bc621000) (0MB)
[ 0.000000] efi: mem202: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc621000-0x00000000bc63f000) (0MB)
[ 0.000000] efi: mem203: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc63f000-0x00000000bc645000) (0MB)
[ 0.000000] efi: mem204: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc645000-0x00000000bc669000) (0MB)
[ 0.000000] efi: mem205: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc669000-0x00000000bc66e000) (0MB)
[ 0.000000] efi: mem206: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc66e000-0x00000000bc6b9000) (0MB)
[ 0.000000] efi: mem207: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc6b9000-0x00000000bc6ba000) (0MB)
[ 0.000000] efi: mem208: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc6ba000-0x00000000bc7ac000) (0MB)
[ 0.000000] efi: mem209: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc7ac000-0x00000000bc7b1000) (0MB)
[ 0.000000] efi: mem210: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc7b1000-0x00000000bc7d8000) (0MB)
[ 0.000000] efi: mem211: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc7d8000-0x00000000bc7de000) (0MB)
[ 0.000000] efi: mem212: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc7de000-0x00000000bc8b4000) (0MB)
[ 0.000000] efi: mem213: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc8b4000-0x00000000bc8b8000) (0MB)
[ 0.000000] efi: mem214: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc8b8000-0x00000000bc999000) (0MB)
[ 0.000000] efi: mem215: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc999000-0x00000000bc99c000) (0MB)
[ 0.000000] efi: mem216: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc99c000-0x00000000bca1c000) (0MB)
[ 0.000000] efi: mem217: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bca1c000-0x00000000bca1e000) (0MB)
[ 0.000000] efi: mem218: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bca1e000-0x00000000bcaaf000) (0MB)
[ 0.000000] efi: mem219: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bcaaf000-0x00000000bcab0000) (0MB)
[ 0.000000] efi: mem220: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bcab0000-0x00000000bcad5000) (0MB)
[ 0.000000] efi: mem221: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bcad5000-0x00000000bcad6000) (0MB)
[ 0.000000] efi: mem222: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bcad6000-0x00000000bcb02000) (0MB)
[ 0.000000] efi: mem223: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bcb02000-0x00000000bcb05000) (0MB)
[ 0.000000] efi: mem224: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bcb05000-0x00000000bcb7d000) (0MB)
[ 0.000000] efi: mem225: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bcb7d000-0x00000000bcb7f000) (0MB)
[ 0.000000] efi: mem226: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bcb7f000-0x00000000bccc5000) (1MB)
[ 0.000000] efi: mem227: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bccc5000-0x00000000bccc9000) (0MB)
[ 0.000000] efi: mem228: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bccc9000-0x00000000bcdaa000) (0MB)
[ 0.000000] efi: mem229: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bcdaa000-0x00000000bcdb8000) (0MB)
[ 0.000000] efi: mem230: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bcdb8000-0x00000000bcdda000) (0MB)
[ 0.000000] efi: mem231: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bcdda000-0x00000000bcddc000) (0MB)
[ 0.000000] efi: mem232: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bcddc000-0x00000000bcde7000) (0MB)
[ 0.000000] efi: mem233: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bcde7000-0x00000000bcde8000) (0MB)
[ 0.000000] efi: mem234: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bcde8000-0x00000000bcdfb000) (0MB)
[ 0.000000] efi: mem235: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bcdfb000-0x00000000bcdfe000) (0MB)
[ 0.000000] efi: mem236: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bcdfe000-0x00000000bd1fe000) (4MB)
[ 0.000000] efi: mem237: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bd1fe000-0x00000000bd3d2000) (1MB)
[ 0.000000] efi: mem238: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bd3d2000-0x00000000bd5c1000) (1MB)
[ 0.000000] efi: mem239: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bd5c1000-0x00000000bd5c3000) (0MB)
[ 0.000000] efi: mem240: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bd5c3000-0x00000000bd5ca000) (0MB)
[ 0.000000] efi: mem241: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bd5ca000-0x00000000bd5cc000) (0MB)
[ 0.000000] efi: mem242: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bd5cc000-0x00000000bd5d2000) (0MB)
[ 0.000000] efi: mem243: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bd5d2000-0x00000000bd5d5000) (0MB)
[ 0.000000] efi: mem244: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bd5d5000-0x00000000bd5e9000) (0MB)
[ 0.000000] efi: mem245: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bd5e9000-0x00000000bd5ed000) (0MB)
[ 0.000000] efi: mem246: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bd5ed000-0x00000000bd5fd000) (0MB)
[ 0.000000] efi: mem247: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bd5fd000-0x00000000bd600000) (0MB)
[ 0.000000] efi: mem248: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bd600000-0x00000000bd6b7000) (0MB)
[ 0.000000] efi: mem249: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bd6b7000-0x00000000bd6b9000) (0MB)
[ 0.000000] efi: mem250: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bd6b9000-0x00000000c7284000) (155MB)
[ 0.000000] efi: mem251: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c7284000-0x00000000c7286000) (0MB)
[ 0.000000] efi: mem252: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c7286000-0x00000000c88c7000) (22MB)
[ 0.000000] efi: mem253: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c88c7000-0x00000000c894b000) (0MB)
[ 0.000000] efi: mem254: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000c894b000-0x00000000c90ba000) (7MB)
[ 0.000000] efi: mem255: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000c90ba000-0x00000000c90d9000) (0MB)
[ 0.000000] efi: mem256: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000c90d9000-0x00000000c914c000) (0MB)
[ 0.000000] efi: mem257: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c914c000-0x00000000c9197000) (0MB)
[ 0.000000] efi: mem258: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000c9197000-0x00000000c92be000) (1MB)
[ 0.000000] efi: mem259: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000c92be000-0x00000000c92ce000) (0MB)
[ 0.000000] efi: mem260: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000c92ce000-0x00000000c92d6000) (0MB)
[ 0.000000] efi: mem261: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000c92d6000-0x00000000c955b000) (2MB)
[ 0.000000] efi: mem262: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000c955b000-0x00000000c9b5c000) (6MB)
[ 0.000000] efi: mem263: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000c9b5c000-0x00000000c9b5e000) (0MB)
[ 0.000000] efi: mem264: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000c9b5e000-0x00000000c9ee6000) (3MB)
[ 0.000000] efi: mem265: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000c9ee6000-0x00000000c9ee8000) (0MB)
[ 0.000000] efi: mem266: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000c9ee8000-0x00000000c9f86000) (0MB)
[ 0.000000] efi: mem267: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000c9f86000-0x00000000c9f9e000) (0MB)
[ 0.000000] efi: mem268: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000c9f9e000-0x00000000c9fff000) (0MB)
[ 0.000000] efi: mem269: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c9fff000-0x00000000ca000000) (0MB)
[ 0.000000] efi: mem270: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000082fe00000) (29438MB)
[ 0.000000] efi: mem271: [Reserved | | | | | | | | | ] range=[0x00000000cb000000-0x00000000cf200000) (66MB)
[ 0.000000] efi: mem272: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem273: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem274: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem275: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem276: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem277: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7930/Z97S SLI PLUS (MS-7930), BIOS V1.0 04/28/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x82fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7800000000 write-back
[ 0.000000] 1 base 0800000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0820000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable
[ 0.000000] 6 base 00CB000000 mask 7FFF000000 uncachable
[ 0.000000] 7 base 082FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd8b0-0x000fd8bf] mapped at [ffff8800000fd8b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b1c000, 0x01b1cfff] PGTABLE
[ 0.000000] BRK [0x01b1d000, 0x01b1dfff] PGTABLE
[ 0.000000] BRK [0x01b1e000, 0x01b1efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x82fc00000-0x82fdfffff]
[ 0.000000] [mem 0x82fc00000-0x82fdfffff] page 2M
[ 0.000000] BRK [0x01b1f000, 0x01b1ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x820000000-0x82fbfffff]
[ 0.000000] [mem 0x820000000-0x82fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x800000000-0x81fffffff]
[ 0.000000] [mem 0x800000000-0x81fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xb7001fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xb6ffffff] page 2M
[ 0.000000] [mem 0xb7000000-0xb7001fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb7009000-0xb7450fff]
[ 0.000000] [mem 0xb7009000-0xb71fffff] page 4k
[ 0.000000] [mem 0xb7200000-0xb73fffff] page 2M
[ 0.000000] [mem 0xb7400000-0xb7450fff] page 4k
[ 0.000000] BRK [0x01b20000, 0x01b20fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xb7a62000-0xc90b9fff]
[ 0.000000] [mem 0xb7a62000-0xb7bfffff] page 4k
[ 0.000000] [mem 0xb7c00000-0xc8ffffff] page 2M
[ 0.000000] [mem 0xc9000000-0xc90b9fff] page 4k
[ 0.000000] BRK [0x01b21000, 0x01b21fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc914c000-0xc9196fff]
[ 0.000000] [mem 0xc914c000-0xc9196fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc9fff000-0xc9ffffff]
[ 0.000000] [mem 0xc9fff000-0xc9ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[ 0.000000] [mem 0x100000000-0x7ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7fc9d000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000C929F000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000C929F088 00008C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C92B1970 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C929F1A8 0127C6 (v02 ALASKA A M I 00000006 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000C92D5F80 000040
[ 0.000000] ACPI: APIC 0x00000000C92B1A80 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C92B1B18 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x00000000C92B1B60 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000C92B1C08 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C92B27F8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000C92B2D38 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000C92B38B0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000C92B38F0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C92B3928 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C92B3C98 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: DMAR 0x00000000C92B97F8 0000B8 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000C92B98B0 000579 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000082fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x82fdf5000-0x82fdf8fff]
[ 0.000000] [ffffea0000000000-ffffea0020bfffff] PMD -> [ffff88080f400000-ffff88082f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000082fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b7001fff]
[ 0.000000] node 0: [mem 0x00000000b7009000-0x00000000b7450fff]
[ 0.000000] node 0: [mem 0x00000000b7a62000-0x00000000c90b9fff]
[ 0.000000] node 0: [mem 0x00000000c914c000-0x00000000c9196fff]
[ 0.000000] node 0: [mem 0x00000000c9fff000-0x00000000c9ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000082fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000082fdfffff]
[ 0.000000] On node 0 totalpages: 8358027
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 24 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12780 pages used for memmap
[ 0.000000] DMA32 zone: 817902 pages, LIFO batch:31
[ 0.000000] Normal zone: 117752 pages used for memmap
[ 0.000000] Normal zone: 7536128 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb518e000-0xb518efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb519e000-0xb519efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb519f000-0xb519ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb51af000-0xb51affff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb51b0000-0xb51b0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb51bf000-0xb51bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7002000-0xb7008fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7451000-0xb7a61fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc90ba000-0xc914bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9197000-0xc92d5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc92d6000-0xc9ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88082fa00000 s86168 r8192 d32616 u262144
[ 0.000000] pcpu-alloc: s86168 r8192 d32616 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8227407
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img rw root=/dev/disk/by-label/root resume=/dev/disk/by-label/swap
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 32600548K/33432108K available (5616K kernel code, 839K rwdata, 1780K rodata, 1160K init, 1152K bss, 831560K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] tsc: Detected 3999.964 MHz processor
[ 0.000018] Calibrating delay loop (skipped), value calculated using timer frequency.. 8003.25 BogoMIPS (lpj=13333213)
[ 0.000020] pid_max: default: 32768 minimum: 301
[ 0.000023] ACPI: Core revision 20150204
[ 0.010037] ACPI: All ACPI Tables successfully acquired
[ 0.011382] Security Framework initialized
[ 0.011387] Yama: becoming mindful.
[ 0.012483] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.016553] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.018342] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.018361] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.018576] Initializing cgroup subsys blkio
[ 0.018577] Initializing cgroup subsys memory
[ 0.018581] Initializing cgroup subsys devices
[ 0.018582] Initializing cgroup subsys freezer
[ 0.018583] Initializing cgroup subsys net_cls
[ 0.018598] CPU: Physical Processor ID: 0
[ 0.018599] CPU: Processor Core ID: 0
[ 0.019300] mce: CPU supports 9 MCE banks
[ 0.019309] CPU0: Thermal monitoring enabled (TM1)
[ 0.019315] process: using mwait in idle threads
[ 0.019317] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.019317] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.019382] Freeing SMP alternatives memory: 20K (ffffffff819f5000 - ffffffff819fa000)
[ 0.023198] ftrace: allocating 21271 entries in 84 pages
[ 0.028537] dmar: Host address width 39
[ 0.028538] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.028544] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.028545] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.028547] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.028548] dmar: RMRR base: 0x000000c9ea8000 end: 0x000000c9eb7fff
[ 0.028549] dmar: RMRR base: 0x000000cb000000 end: 0x000000cf1fffff
[ 0.028550] IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.028551] HPET id 0 under DRHD base 0xfed91000
[ 0.028702] Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
[ 0.028710] Enabled IRQ remapping in xapic mode
[ 0.028710] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.029120] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062124] TSC deadline timer enabled
[ 0.062127] smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (fam: 06, model: 3c, stepping: 03)
[ 0.062142] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.062153] ... version: 3
[ 0.062154] ... bit width: 48
[ 0.062154] ... generic registers: 4
[ 0.062155] ... value mask: 0000ffffffffffff
[ 0.062155] ... max period: 0000ffffffffffff
[ 0.062156] ... fixed-purpose events: 3
[ 0.062156] ... event mask: 000000070000000f
[ 0.082156] x86: Booting SMP configuration:
[ 0.082157] .... node #0, CPUs: #1
[ 0.096026] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.102671] #2 #3 #4 #5 #6 #7
[ 0.215726] x86: Booted up 1 node, 8 CPUs
[ 0.215729] smpboot: Total of 8 processors activated (64025.06 BogoMIPS)
[ 0.221549] devtmpfs: initialized
[ 0.223967] PM: Registering ACPI NVS region [mem 0xb7002000-0xb7008fff] (28672 bytes)
[ 0.223969] PM: Registering ACPI NVS region [mem 0xc9197000-0xc92d5fff] (1306624 bytes)
[ 0.224077] pinctrl core: initialized pinctrl subsystem
[ 0.224107] RTC time: 15:48:21, date: 05/14/15
[ 0.224177] NET: Registered protocol family 16
[ 0.234755] cpuidle: using governor ladder
[ 0.248091] cpuidle: using governor menu
[ 0.248121] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.248122] ACPI: bus type PCI registered
[ 0.248123] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.248165] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.248166] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.248209] PCI: Using configuration type 1 for base access
[ 0.261611] ACPI: Added _OSI(Module Device)
[ 0.261612] ACPI: Added _OSI(Processor Device)
[ 0.261613] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.261613] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.264799] ACPI: Executed 15 blocks of module-level executable AML code
[ 0.266553] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.267094] ACPI: Dynamic OEM Table Load:
[ 0.267098] ACPI: SSDT 0xFFFF88080B663800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.267566] ACPI: Dynamic OEM Table Load:
[ 0.267569] ACPI: SSDT 0xFFFF88080B659800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.268063] ACPI: Dynamic OEM Table Load:
[ 0.268065] ACPI: SSDT 0xFFFF88080B6AA200 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.269341] ACPI: Interpreter enabled
[ 0.269345] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.269349] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.269361] ACPI: (supports S0 S3 S4 S5)
[ 0.269362] ACPI: Using IOAPIC for interrupt routing
[ 0.269378] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.269627] ACPI: Power Resource [PG00] (on)
[ 0.269846] ACPI: Power Resource [PG01] (on)
[ 0.270040] ACPI: Power Resource [PG02] (on)
[ 0.275744] ACPI: Power Resource [FN00] (off)
[ 0.275782] ACPI: Power Resource [FN01] (off)
[ 0.275819] ACPI: Power Resource [FN02] (off)
[ 0.275855] ACPI: Power Resource [FN03] (off)
[ 0.275891] ACPI: Power Resource [FN04] (off)
[ 0.276366] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.276370] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.276489] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.276557] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.276802] PCI host bridge to bus 0000:00
[ 0.276803] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.276804] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.276805] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.276806] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.276807] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.276808] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.276808] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.276809] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.276810] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[ 0.276815] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.276872] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.276896] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.276928] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.276952] pci 0000:00:02.0: [8086:0412] type 00 class 0x038000
[ 0.276957] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.276961] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.276963] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.277012] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.277016] pci 0000:00:03.0: reg 0x10: [mem 0xf7a34000-0xf7a37fff 64bit]
[ 0.277084] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[ 0.277098] pci 0000:00:14.0: reg 0x10: [mem 0xf7a20000-0xf7a2ffff 64bit]
[ 0.277148] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.277180] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.277203] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[ 0.277218] pci 0000:00:16.0: reg 0x10: [mem 0xf7a3e000-0xf7a3e00f 64bit]
[ 0.277271] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.277326] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
[ 0.277339] pci 0000:00:19.0: reg 0x10: [mem 0xf7a00000-0xf7a1ffff]
[ 0.277346] pci 0000:00:19.0: reg 0x14: [mem 0xf7a3c000-0xf7a3cfff]
[ 0.277352] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.277402] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.277435] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.277460] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[ 0.277477] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a3b000-0xf7a3b3ff]
[ 0.277551] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.277587] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.277611] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[ 0.277622] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a30000-0xf7a33fff 64bit]
[ 0.277672] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.277705] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.277727] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[ 0.277782] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.277813] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.277834] pci 0000:00:1c.2: [8086:244e] type 01 class 0x060401
[ 0.277890] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.277920] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.277940] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
[ 0.277996] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.278026] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.278047] pci 0000:00:1c.4: [8086:8c98] type 01 class 0x060400
[ 0.278105] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.278136] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.278157] pci 0000:00:1c.5: [8086:8c9a] type 01 class 0x060400
[ 0.278213] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.278244] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.278266] pci 0000:00:1c.7: [8086:8c9e] type 01 class 0x060400
[ 0.278322] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.278352] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.278376] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[ 0.278393] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a3a000-0xf7a3a3ff]
[ 0.278468] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[

russ0r wrote:Are you using GNOME?
Yes, in fact.
What's your memory usage look like?
Not sure. I didn't check. But I'll be keeping a resource usage diagram visible on screen for when it happens again.
I have the same problem, but it's caused by GNOME gobbling up too much memory. Even with 8Gb I run out after a few hours. I haven't found a fix yet, considering switching to MATE or KDE as a result.
I do doubt that's the problem for me. I have 32GB of RAM and another 32GB swap-space. And while writing this reply, memory usage hasn't gone up one bit.
Also, I now found some revealing messages in dmesg, which I put in my original post.
Last edited by mhelvens (2015-05-14 15:57:59)

GPU lock up with nvidia GeForce4 MX and nouveau driver

hello
getting a "GPU lock out" message when booting Arch - Geforce4 MX 64mb card
extract from dmseg:-
[ 24.175980] [TTM] Initializing pool allocator
[ 24.176007] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM (DDR1)
[ 24.176569] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 24.176598] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 24.176638] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 24.176735] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
[ 24.176831] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 24.235131] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 24.235137] [drm] No driver support for vblank timestamp query.
[ 24.240867] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 24.240874] [drm] nouveau 0000:01:00.0: 0: memory 270MHz
[ 24.240879] [drm] nouveau 0000:01:00.0: c: core 249MHz memory 279MHz
[ 24.242940] [drm] nouveau 0000:01:00.0: 0xE72C: Parsing digital output script table
[ 24.265606] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 24.265613] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 24.265619] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2)
[ 24.344176] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo f5859e00
[ 24.344385] fbcon: nouveaufb (fb0) is primary device
[ 24.368223] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 24.368232] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[ 24.403590] firewire_core 0000:04:0c.0: created device fw0: GUID 805b0600a8678400, S400
[ 24.447427] [drm] nouveau 0000:01:00.0: GPU lockup - switching to software fbcon
[ 24.451362] Console: switching to colour frame buffer device 160x64
[ 24.458961] fb0: nouveaufb frame buffer device
[ 24.458965] drm: registered panic notifier
[ 24.458975] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[ 24.593364] intel8x0_measure_ac97_clock: measured 50169 usecs (2810 samples)
[ 24.593371] intel8x0: clocking to 41135
[ 26.447145] EXT4-fs (sdc3): re-mounted. Opts: (null)
[ 26.543027] EXT4-fs (sdc1): mounting ext2 file system using the ext4 subsystem
[ 26.551916] EXT4-fs (sdc1): mounted filesystem without journal. Opts: (null)
[ 26.552444] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 26.584073] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 26.664062] Adding 530140k swap on /dev/sdc2. Priority:-1 extents:1 across:530140k
Does anyone know if this looks like a hardware issue or a driver (drm) probelm? Very old card so sort of expecting it to be hardware related.
Strangely I can clear the problem and get into X by fsking the discs from Ubuntu recovery console (dual booting the two) - just thinking whether there's a lock file somewhere not getting cleaned up or something?

I confirm this. I have the same card (NV17 [GeForce4 MX 440]), and I get random lockups with the nouveau driver and a recent kernel. It's probably a memory handling problem in the DRM driver.

Zoom and Nouveau driver

Does anyone know if the ctrl-alt-keypad+ to zoom or change resolution is removed from the nouveau driver?

No, this is an old function that has always been around since the early days of Xfree86 and of course xorg, it has nothing to with the WM/DE. Just google and you see really a lot about it:
http://www.google.se/search?hl=sv&tbo=d … 4QSz1IGgDw
It is a way to cycle through the different resolution modes and can be set up to either change resolution or to zoom (to make the view larger than the screen).

NVIDIA Optimus and nouveau - KMS not enabled

Hi,
Trying to get Optimus to run with bumblebee, having a GeForce GT 750M and the Haswell Intel HD Graphics 4600.
I've installed bumblebee, bbswitch, primus, nouveau, nouveau-dri, intel driver and mesa.
I have no xorg.conf.
If I run
primusrun glxgears
I get an error
primus: fatal: Bumblebee daemon reported: error: [XORG] (EE) [drm] KMS not enabled
Xorg.8.log also says KMS is not enabled. I can however smoothly switch between ttys, and things seem to be working normally, except I haven't got compositing in GNOME 3.
Any ideas?
Last edited by Mzg (2014-02-14 23:36:03)

I remember having the similar problem with my GT740M (GK208) card half a year ago. I switched to the closed source nvidia driver and the problem gone and I haven't switched back to nouveau since.
My solution then is to unistall nouveau nouveau-dri and install nvidia, reboot, and the problem is gone.
Actually I thought the problem is caused by the strange GK208 which was not supported by nouveau at that time. But your problem seems to prove my thought wrong (GT750M is GK107). So I'm also interested in the right answer in case I switch back to the open source driver in the future.

Spolight result and Applescript in harmony

Hello,
I'm new to Applescript and what I'm interested in doing seems like a great job for it.
I've made a spotlight search on a single folder in the file system and saved the search to its default location (/Users/alex/Library/Saved Searches/searchQuery). My search was for all pdf files in and beneath its directory. My list of results contain many duplicates and I'd like to thin it so that it shows or selects only unique files (this means if there are duplicates, show only one copy).
I was thinking that if I iterate through the list of results by comparing the name of the file with subsequent files along with its file size this should give me the result I'm looking for. Also, some of the duplicate files appear like abc-1.pdf or abc-2.pdf where these dash integers ("-1") is appended before the prefix so not to overwrite a file of the same name when I first downloaded them.
Finally, I'd like to make a copy of these files so that all are unique in a new directory. I plan on making a backup of these documents.
As an aside, I've already made the search and selected what I consider to be unique files by using simple mouse clicks while holding the command key. It's a painful thing to do when you have hundreds of these files. Even worse, I found out you can't copy files from a Spotlight search result - it gives you a system beep error.
Thanks to all who spend the time reading this lengthy thread. I appreciate your time and energy
Cheers,
Alex

Yes, you're right @Camelot. I had anticipated comparing file sizes along with the file name to check for duplicates. My file count that I want to sift through is in the hundreds and not thousands so I think this is sufficient for my purposes.
I've heard that calling a bash script from applescript to check for file details can be slow and was curious to know if you can run a regex comparison of the file name from applescript and also check the file size within applescript as well. Again, I guess since I have only a few hundred files to compare with, this slow down may be negligible and not worth the hassle of maybe doing it all within applescript.
What I have so far looks like:
(* Get array of paths to selected folders in following try statement *)
set pathsList to {}
try
set pathsList to ¬
choose folder with prompt ¬
"Select as many folders as you like:" with multiple selections allowed
on error eStr number eNum partial result rList from badObj to expectedType
do shell script "echo " & eStr
end try
(* The above method uses the colon (:) as a delimiter for subsequent folders. I'd like to get paths like /Users/alex/fileA:/Users/alex/fileB and so on... *)
(* Failing the above, I don't mind removing the "with multiple selections allowed" portion to get one path from the user instead. *)
(* Next I want to perform a spotlight search for files of pdf type within each path *)
set resultsList to {}
repeat with currentPath in pathsList
(* do Spotlight Search here *)
(* How do I retain the list of results in resultsList? *)
end repeat
set listOfNames to {}
set uniqueFilesList to {}
tell application "Finder"
repeat with currentFile in resultsList
set currentFileName to (the name of currentFile)
(* And do the same for the file size: *)
set currentFileSize to (the size of currentFile)
(* Make certain that the currentFile is an original and store in uniqueFilesList if so *)
set flag to 0
repeat with uniqueFile in uniqueFilesList
set uniqueFileName to (the name of uniqueFile)
set uniqueFileSize to (the size of uniqueFile)
if uniqueFileName contains currentFileName then
set flag to 1
if uniqueFileSize is not equal to currentFileSize then
set flag to 0
end if
end if
if flag = 1 then
break
end if
end repeat
if flag = 0 then (* add to final list *)
copy currentFolderName to the end of listOfNames
end if
set lastFolderName to currentFolderName
end repeat
end tell
Any fixes you may think of for this piece of code would be appreciated.
Regards,
Alex

IPhone and Leopard in harmony?

Hey,
I have an iPhone which is at 1.0.2 and I have also ordered Leopard.
Will Leopard play nice nice with the iPhone on 1.0.2 or do I have to update to 1.1.1
I don't want to update because I....well..just don't want to. :P
Ramin

"DVD on iPod Video,"
No lectures, but if you are using an unlocked U.S. iPhone you have (knowingly or unknowingly) forfeited any support for your iPhone from Apple in favor of support from the suppliers of the unlocking software & the user community that supports it. Consequentially, you will have to ask them support questions of this nature in whatever forums they offer.
IOW, it is all about support. I wish you luck with this but don't expect posts that delve to deeply into this to remain accessible here.

Nvidea and Cuda

I've been using Mac for just under a year and do take the time time to try and work things out for myself but I am really stuck on CUDA and hope this is the right place to ask for help.
I use Photoshop and Illustrator. When using Photoshop shortly after installed I got a window saying there had been a problem with my graphics card and my Photoshop was now running as 32 not 64. I have a screen shot of the message but don't know how to post it.
I googled and discovered I have two graphics cards on this machine so I downloaded to gfxCardStatus to check the Nvidia card was working. Apparently it was.
I also read somewhere that I needed to upgrade my card. In Mac Forums I was told not to do that as as upgrade would come in with the Mac software updates when needed. So I carried on with the 32bt Photoshop. Months later I still am!
I have just upgraded to Lion and while trying to get used to it I went through all my settings and prefs. I found I have a CUDA application which needs updating but I am not sure how it got there, or even if I should have it. I may have downloaded it when I thought updates where down to me.
Can someone tell me if I should use it and also if installing it, or upgrading it if it is installed is difficult. I am struggling with Lion, Macbook gone very slow on and off, my wireless keeps disconnecting, zooming in Safari and Photoshop suddenly so i dont want to make anything worse.
I have a 17" MacBook Pro running Lion 10.72 but this problem was also on Snow Leopard.
Thank you.

Did it fix your issue? As far as CUDA goes, there is no configuring to be done, keep the driver up to date and you should get the performance boost from CUDA without facing the issues. It probably showed up because you modified your driver or an update was done. Keep in mind, Lion (10.7) is fully 64 bit so that could also be why CUDA showed up after you upgraded. Good luck though!
-Reset SMC/PRAM
-Update your video card and if you can CUDA
If photoshop is still running 32bit, you may need to uninstall and reinstall it with everything updated.
System Requirements for CUDA on Mac OS
To use CUDA on your system, you will need the following installed:
   CUDA-enabled GPU
   Mac OS X v. 10.5.2 or later
   The gcc compiler and toolchain installed via Xcode
   CUDA software (available at no cost from http://www.nvidia.com/cuda)

IPod with Universal Dock and Logitech Harmony 880 Remote

Is anyone successfully using their iPod with Universal Dock and the Logitech Harmony 880 remote? Does it need to be trained or does can you use the logitech software to program the remote?

Is anyone successfully using their iPod with
Universal Dock and the Logitech Harmony 880 remote?
Does it need to be trained or does can you use the
logitech software to program the remote?
You can program the 880 to work with the Universal Dock with just the logitech software. Just add a Digital Music Server and when asked what Model it is enter "iPod Universal Dock". That's it. For some reason Logitech tech support says it can't be done but me and and a couple of friends have done it without any issues.

[Solved]Cannot startx on fresh install with xfce4 and nvidia-304xx-lts

I just installed Arch base onto my system with my Nvidia GTS 250 Graphics card, however I am unable to start a x session after installing xfce4 and nvidia-304xx-lts followed by the command nvidia-xconfig and reboot. When I try to issue startxfce4 I get an error pointing to /var/log/Xorg.0.log as follows
[ 24.856]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 24.857] X Protocol Version 11, Revision 0
[ 24.857] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 24.857] Current Operating System: Linux yte 3.16.2-1-ARCH #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014 x86_64
[ 24.857] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 24.857] Build Date: 31 July 2014 11:53:19AM
[ 24.857]
[ 24.857] Current version of pixman: 0.32.6
[ 24.858] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 24.858] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.858] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 17 21:49:53 2014
[ 24.875] (==) Using config file: "/etc/X11/xorg.conf"
[ 24.875] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24.897] (==) ServerLayout "Layout0"
[ 24.897] (**) |-->Screen "Screen0" (0)
[ 24.897] (**) | |-->Monitor "Monitor0"
[ 24.905] (**) | |-->Device "Device0"
[ 24.905] (**) |-->Input Device "Keyboard0"
[ 24.905] (**) |-->Input Device "Mouse0"
[ 24.905] (==) Automatically adding devices
[ 24.905] (==) Automatically enabling devices
[ 24.905] (==) Automatically adding GPU devices
[ 24.914] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 24.914] Entry deleted from font path.
[ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 24.914] Entry deleted from font path.
[ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 24.914] (==) FontPath set to:
/usr/share/fonts/misc/
[ 24.914] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.914] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 24.914] (WW) Disabling Keyboard0
[ 24.914] (WW) Disabling Mouse0
[ 24.914] (II) Loader magic: 0x818d80
[ 24.914] (II) Module ABI versions:
[ 24.914] X.Org ANSI C Emulation: 0.4
[ 24.914] X.Org Video Driver: 18.0
[ 24.914] X.Org XInput driver : 21.0
[ 24.914] X.Org Server Extension : 8.0
[ 24.917] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 24.918] (--) PCI:*(0:4:0:0) 10de:0615:19f1:0d76 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
[ 24.918] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24.919] (II) LoadModule: "glx"
[ 24.953] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.974] (II) Module glx: vendor="NVIDIA Corporation"
[ 25.974] compiled for 4.0.2, module version = 1.0.0
[ 25.974] Module class: X.Org Server Extension
[ 25.974] (II) NVIDIA GLX Module 304.123 Wed Jul 2 11:19:55 PDT 2014
[ 25.974] (II) LoadModule: "nvidia"
[ 25.974] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 26.027] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 26.027] compiled for 4.0.2, module version = 1.0.0
[ 26.027] Module class: X.Org Video Driver
[ 26.042] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 26.042] (EE) NVIDIA: system's kernel log for additional error messages.
[ 26.042] (II) UnloadModule: "nvidia"
[ 26.042] (II) Unloading nvidia
[ 26.042] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 26.042] (EE) No drivers available.
[ 26.042] (EE)
Fatal server error:
[ 26.042] (EE) no screens found(EE)
[ 26.042] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 26.042] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 26.042] (EE)
It apears to be trying to load various modules, first of which is my propietary nvidia driver which refers to the kernel log. My dmesg looks like this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffadfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cffae000-0x00000000cffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: HP-Pavilion FQ618AA-A2L a6734f/Benicia, BIOS 5.35 12/16/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[ 0.000000] [mem 0x12c000000-0x12fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[ 0.000000] [mem 0x100000000-0x12bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff9ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcff9ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x3798e000-0x37cbefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FC440 000014 (v00 HPQOEM)
[ 0.000000] ACPI: RSDT 0x00000000CFFA0000 000044 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000CFFA0200 000084 (v02 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000CFFA0440 004E91 (v01 HPQOEM SLIC-CPC 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CFFAE000 000040
[ 0.000000] ACPI: APIC 0x00000000CFFA0390 00006C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000CFFA0400 00003C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000CFFAE040 000072 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CFFA52E0 000038 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: GSCI 0x00000000CFFAE0C0 002024 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000CFFB00F0 000176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CFFB14B0 00082F (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[ 0.000000] NODE_DATA [mem 0x12fff7000-0x12fffbfff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xcff9ffff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] On node 0 totalpages: 1048381
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13247 pages used for memmap
[ 0.000000] DMA32 zone: 847776 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffa0000-0xcffadfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffae000-0xcffdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86784 r8192 d23808 u524288
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031977
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4046408K/4193524K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 147116K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 2333.276 MHz processor
[ 0.006681] Calibrating delay loop (skipped), value calculated using timer frequency.. 4668.99 BogoMIPS (lpj=7777586)
[ 0.006685] pid_max: default: 32768 minimum: 301
[ 0.006695] ACPI: Core revision 20140424
[ 0.012534] ACPI: All ACPI Tables successfully acquired
[ 0.013368] Security Framework initialized
[ 0.013377] Yama: becoming mindful.
[ 0.013731] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.017212] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.017970] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.017980] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.018300] Initializing cgroup subsys memory
[ 0.018326] Initializing cgroup subsys devices
[ 0.018334] Initializing cgroup subsys freezer
[ 0.018338] Initializing cgroup subsys net_cls
[ 0.018344] Initializing cgroup subsys blkio
[ 0.018375] CPU: Physical Processor ID: 0
[ 0.018376] CPU: Processor Core ID: 0
[ 0.018379] mce: CPU supports 6 MCE banks
[ 0.018387] CPU0: Thermal monitoring enabled (TM2)
[ 0.018394] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.018487] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.019569] ftrace: allocating 20434 entries in 80 pages
[ 0.027196] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060221] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (fam: 06, model: 17, stepping: 07)
[ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063333] ... version: 2
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 3
[ 0.063333] ... event mask: 0000000700000003
[ 0.076742] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083412] x86: Booting SMP configuration:
[ 0.083415] .... node #0, CPUs: #1 #2 #3
[ 0.130014] x86: Booted up 1 node, 4 CPUs
[ 0.130018] smpboot: Total of 4 processors activated (18673.96 BogoMIPS)
[ 0.133346] devtmpfs: initialized
[ 0.136924] PM: Registering ACPI NVS region [mem 0xcffae000-0xcffdffff] (204800 bytes)
[ 0.137923] pinctrl core: initialized pinctrl subsystem
[ 0.137968] RTC time: 1:49:28, date: 09/18/14
[ 0.138025] NET: Registered protocol family 16
[ 0.138158] cpuidle: using governor ladder
[ 0.138160] cpuidle: using governor menu
[ 0.138185] ACPI: bus type PCI registered
[ 0.138187] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.138268] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.138270] PCI: not using MMCONFIG
[ 0.138272] PCI: Using configuration type 1 for base access
[ 0.153430] ACPI: Added _OSI(Module Device)
[ 0.153430] ACPI: Added _OSI(Processor Device)
[ 0.153430] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.153430] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.155075] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.157331] ACPI: Dynamic OEM Table Load:
[ 0.157338] ACPI: SSDT 0xFFFF880129AB7600 0001F3 (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
[ 0.157716] ACPI: Dynamic OEM Table Load:
[ 0.157721] ACPI: SSDT 0xFFFF880129AB7400 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158103] ACPI: Dynamic OEM Table Load:
[ 0.158109] ACPI: SSDT 0xFFFF8801295D4000 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158489] ACPI: Dynamic OEM Table Load:
[ 0.158494] ACPI: SSDT 0xFFFF8801295D4200 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158833] ACPI: Interpreter enabled
[ 0.158843] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.158857] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.158859] ACPI: Using IOAPIC for interrupt routing
[ 0.158879] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.159657] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.160132] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.165222] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.165228] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.165233] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.165516] PCI host bridge to bus 0000:00
[ 0.165519] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.165522] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.165524] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.165526] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.165528] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.165530] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
[ 0.165532] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[ 0.165541] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.165640] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.165677] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.165716] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.165796] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.165844] pci 0000:00:1a.0: reg 0x20: [io 0xb400-0xb41f]
[ 0.165936] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.165991] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.166039] pci 0000:00:1a.1: reg 0x20: [io 0xb480-0xb49f]
[ 0.166130] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.166194] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.166216] pci 0000:00:1a.7: reg 0x10: [mem 0xf9efec00-0xf9efefff]
[ 0.166307] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.166350] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.166407] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.166427] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ef8000-0xf9efbfff 64bit]
[ 0.166516] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.166616] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.166706] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.166752] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.166807] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.166899] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.166945] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.167003] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.167049] pci 0000:00:1d.0: reg 0x20: [io 0xb800-0xb81f]
[ 0.167139] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.167203] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.167250] pci 0000:00:1d.1: reg 0x20: [io 0xb880-0xb89f]
[ 0.167339] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.167392] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.167439] pci 0000:00:1d.2: reg 0x20: [io 0xbc00-0xbc1f]
[ 0.167528] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.167580] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 0.167627] pci 0000:00:1d.3: reg 0x20: [io 0xc000-0xc01f]
[ 0.167719] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.167782] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.167804] pci 0000:00:1d.7: reg 0x10: [mem 0xf9eff800-0xf9effbff]
[ 0.167895] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.167938] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.167989] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.168083] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.168135] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[ 0.168209] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.168214] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.168217] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.168328] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[ 0.168351] pci 0000:00:1f.2: reg 0x10: [io 0xc880-0xc887]
[ 0.168361] pci 0000:00:1f.2: reg 0x14: [io 0xc800-0xc803]
[ 0.168371] pci 0000:00:1f.2: reg 0x18: [io 0xc480-0xc487]
[ 0.168381] pci 0000:00:1f.2: reg 0x1c: [io 0xc400-0xc403]
[ 0.168390] pci 0000:00:1f.2: reg 0x20: [io 0xc080-0xc09f]
[ 0.168400] pci 0000:00:1f.2: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
[ 0.168458] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.168549] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.168567] pci 0000:00:1f.3: reg 0x10: [mem 0xf9effc00-0xf9effcff 64bit]
[ 0.168592] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.168733] pci 0000:04:00.0: [10de:0615] type 00 class 0x030000
[ 0.168748] pci 0000:04:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.168761] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.168774] pci 0000:04:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.168784] pci 0000:04:00.0: reg 0x24: [io 0xdc00-0xdc7f]
[ 0.168793] pci 0000:04:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
[ 0.168906] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.168909] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.168912] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.168916] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.168982] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.169127] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.169187] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.169296] pci 0000:02:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
[ 0.169354] pci 0000:02:00.0: reg 0x20: [mem 0xf8ff0000-0xf8ffffff 64bit pref]
[ 0.169397] pci 0000:02:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.169663] pci 0000:02:00.0: supports D1 D2
[ 0.169665] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169850] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.169855] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.169859] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.169866] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.169932] pci 0000:01:05.0: [11c1:5811] type 00 class 0x0c0010
[ 0.169949] pci 0000:01:05.0: reg 0x10: [mem 0xf9fff000-0xf9ffffff]
[ 0.170025] pci 0000:01:05.0: supports D1 D2
[ 0.170028] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.170112] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.170119] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.170126] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.170128] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.170131] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.170133] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.170135] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.170137] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.170715] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.170769] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.170823] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.170875] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.170927] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.170983] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.171036] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.171088] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.171151] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.171253] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.171253] vgaarb: loaded
[ 0.171253] vgaarb: bridge control possible 0000:04:00.0
[ 0.171253] PCI: Using ACPI for IRQ routing
[ 0.179597] PCI: pci_cache_line_size set to 64 bytes
[ 0.179658] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.179660] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff]
[ 0.179795] NetLabel: Initializing
[ 0.179797] NetLabel: domain hash size = 128
[ 0.179798] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.179813] NetLabel: unlabeled traffic allowed by default
[ 0.179835] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.179841] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.179845] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.181019] Switched to clocksource hpet
[ 0.187008] pnp: PnP ACPI init
[ 0.187030] ACPI: bus type PNP registered
[ 0.187128] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.187133] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.187213] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.187433] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.187436] system 00:02: [io 0x0800-0x087f] could not be reserved
[ 0.187438] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.187441] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.187444] system 00:02: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.187447] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187548] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.187551] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.187555] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187674] system 00:04: [io 0x0a00-0x0adf] has been reserved
[ 0.187678] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187756] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.187759] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187825] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.187829] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.188006] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.188009] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.188012] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.188014] system 00:07: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.188017] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.188133] pnp: PnP ACPI: found 8 devices
[ 0.188135] ACPI: bus type PNP unregistered
[ 0.197465] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.197469] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.197472] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.197491] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.197494] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.197497] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.197499] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.197505] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[ 0.197510] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197514] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.197516] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.197519] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.197522] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.197525] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.197529] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.197532] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.197537] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
[ 0.197542] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197548] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.197551] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.197557] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.197561] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.197568] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.197573] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.197582] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.197585] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.197587] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.197589] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.197591] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.197593] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.197596] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.197598] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfeafffff]
[ 0.197600] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.197602] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.197604] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf01fffff]
[ 0.197607] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197609] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.197611] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.197613] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.197615] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.197618] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.197620] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.197622] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.197624] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.197626] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.197628] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.197657] NET: Registered protocol family 2
[ 0.197878] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.197999] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.198159] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.198193] TCP: reno registered
[ 0.198203] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.198230] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.198298] NET: Registered protocol family 1
[ 0.199202] pci 0000:04:00.0: Boot video device
[ 0.199211] PCI: CLS 32 bytes, default 64
[ 0.199266] Unpacking initramfs...
[ 0.265035] Freeing initrd memory: 3268K (ffff88003798e000 - ffff880037cbf000)
[ 0.265050] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.265053] software IO TLB [mem 0xcbfa0000-0xcffa0000] (64MB) mapped at [ffff8800cbfa0000-ffff8800cff9ffff]
[ 0.265383] Scanning for low memory corruption every 60 seconds
[ 0.265750] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.266220] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.268226] zbud: loaded
[ 0.268426] VFS: Disk quotas dquot_6.5.2
[ 0.268472] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.268644] msgmni has been set to 7909
[ 0.268709] Key type big_key registered
[ 0.269063] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.269162] io scheduler noop registered
[ 0.269165] io scheduler deadline registered
[ 0.269227] io scheduler cfq registered (default)
[ 0.269402] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.269456] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.269523] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.269664] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.269772] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.269794] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.269839] intel_idle: does not run on family 6 model 23
[ 0.269876] GHES: HEST is not enabled!
[ 0.269980] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.270599] Linux agpgart interface v0.103
[ 0.270658] rtc_cmos 00:01: RTC can wake from S4
[ 0.270820] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.270850] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.270864] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.270984] TCP: cubic registered
[ 0.271114] NET: Registered protocol family 10
[ 0.271372] NET: Registered protocol family 17
[ 0.271821] registered taskstats version 1
[ 0.272365] Magic number: 14:261:812
[ 0.272465] rtc_cmos 00:01: setting system clock to 2014-09-18 01:49:28 UTC (1411004968)
[ 0.272539] PM: Hibernation image not present or could not be loaded.
[ 0.273767] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 0.273769] Write protecting the kernel read-only data: 8192k
[ 0.276140] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
[ 0.277248] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 0.284774] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.286420] systemd-udevd[59]: starting version 216
[ 0.299539] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.302475] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.302536] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.305975] ACPI: bus type USB registered
[ 0.306007] usbcore: registered new interface driver usbfs
[ 0.306020] usbcore: registered new interface driver hub
[ 0.306135] usbcore: registered new device driver usb
[ 0.306716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.307076] ehci-pci: EHCI PCI platform driver
[ 0.307191] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.307253] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.307261] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.307274] ehci-pci 0000:00:1a.7: debug port 1
[ 0.311183] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.311202] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9efec00
[ 0.315748] SCSI subsystem initialized
[ 0.317397] libata version 3.00 loaded.
[ 0.320025] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.323598] hub 1-0:1.0: USB hub found
[ 0.323608] hub 1-0:1.0: 4 ports detected
[ 0.323904] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.323911] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.323925] ehci-pci 0000:00:1d.7: debug port 1
[ 0.327815] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.327834] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9eff800
[ 0.336696] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.336926] hub 2-0:1.0: USB hub found
[ 0.336936] hub 2-0:1.0: 8 ports detected
[ 0.337334] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.337345] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.337354] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.337394] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400
[ 0.337866] hub 3-0:1.0: USB hub found
[ 0.337875] hub 3-0:1.0: 2 ports detected
[ 0.338094] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.338100] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.338107] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.338134] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b480
[ 0.338347] hub 4-0:1.0: USB hub found
[ 0.338355] hub 4-0:1.0: 2 ports detected
[ 0.338546] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.338553] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.338559] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.338578] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
[ 0.338786] hub 5-0:1.0: USB hub found
[ 0.338794] hub 5-0:1.0: 2 ports detected
[ 0.338981] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.338987] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.338993] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.339020] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
[ 0.339235] hub 6-0:1.0: USB hub found
[ 0.339244] hub 6-0:1.0: 2 ports detected
[ 0.339429] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.339435] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.339442] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.339460] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00
[ 0.339667] hub 7-0:1.0: USB hub found
[ 0.339675] hub 7-0:1.0: 2 ports detected
[ 0.339862] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.339870] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.339876] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.339894] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000
[ 0.340109] hub 8-0:1.0: USB hub found
[ 0.340117] hub 8-0:1.0: 2 ports detected
[ 0.340263] ahci 0000:00:1f.2: version 3.0
[ 0.340410] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.340467] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.340515] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.340519] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 0.366734] firewire_ohci 0000:01:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 0.374399] scsi0 : ahci
[ 0.374615] scsi1 : ahci
[ 0.374814] scsi2 : ahci
[ 0.375005] scsi3 : ahci
[ 0.375196] scsi4 : ahci
[ 0.375388] scsi5 : ahci
[ 0.375468] ata1: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 43
[ 0.375472] ata2: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 43
[ 0.375474] ata3: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 43
[ 0.375477] ata4: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 43
[ 0.375480] ata5: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 43
[ 0.375482] ata6: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 43
[ 0.630034] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 0.693360] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.754296] hub 1-2:1.0: USB hub found
[ 0.754373] hub 1-2:1.0: 7 ports detected
[ 0.866772] firewire_core 0000:01:05.0: created device fw0: GUID 001e8c0001bb0f0a, S400
[ 1.013360] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.266684] tsc: Refined TSC clocksource calibration: 2333.285 MHz
[ 1.333363] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.336819] ata3.00: ATA-8: WDC WD10EARS-00MVWB0, 50.0AB50, max UDMA/133
[ 1.336823] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.340399] ata3.00: configured for UDMA/133
[ 1.340517] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00M AB50 PQ: 0 ANSI: 5
[ 1.373365] usb 2-5: new high-speed USB device number 3 using ehci-pci
[ 1.500038] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 1.500227] scsi6 : usb-storage 2-5:1.0
[ 1.500322] usbcore: registered new interface driver usb-storage
[ 1.500694] usbcore: registered new interface driver uas
[ 1.660027] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.980028] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 1.980030] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.125620] usb 5-1: config 1 has an invalid descriptor of length 17, skipping remainder of the config
[ 2.125624] usb 5-1: config 1 has 1 interface, different from the descriptor's value: 4
[ 2.125628] usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor's value: 2
[ 2.266750] Switched to clocksource tsc
[ 2.370018] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 2.504151] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.504778] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.505402] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.506038] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.509294] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.509340] sd 2:0:0:0: [sda] Write Protect is off
[ 2.509343] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.509363] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.515260] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2.515889] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 2.516511] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 2.517136] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 2.569106] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.569597] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.571450] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.586591] usbcore: registered new interface driver usbhid
[ 2.586594] usbhid: USB HID core driver
[ 2.587316] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:046D:C24A.0001/input/input2
[ 2.587394] hid-generic 0003:046D:C24A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input0
[ 2.620024] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.621301] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:046D:C24A.0002/input/input3
[ 2.621413] hid-generic 0003:046D:C24A.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input1
[ 2.623705] ata6.00: ATAPI: HL-DT-ST BDDVDRW GBC-H20L, 1.B8, max UDMA/100
[ 2.628682] ata6.00: configured for UDMA/100
[ 2.741224] scsi 5:0:0:0: CD-ROM HL-DT-ST BDDVDRW GBC-H20L 1.B8 PQ: 0 ANSI: 5
[ 2.796696] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 2.870295] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.870300] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.870508] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.983435] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.0/0003:046D:C318.0003/input/input4
[ 2.983518] hid-generic 0003:046D:C318.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input0
[ 2.987055] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.1/0003:046D:C318.0004/input/input5
[ 2.987190] hid-generic 0003:046D:C318.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input1
[ 3.173499] usb 1-2.7: new high-speed USB device number 4 using ehci-pci
[ 3.257551] hub 1-2.7:1.0: USB hub found
[ 3.257622] hub 1-2.7:1.0: 4 ports detected
[ 3.316702] floppy0: no floppy controllers found
[ 3.830625] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.027733] random: nonblocking pool is initialized
[ 4.403265] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[ 4.403452] systemd[1]: Detected architecture 'x86-64'.
[ 4.434571] systemd[1]: Set hostname to <yte>.
[ 5.263934] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.264264] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.264322] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.264334] systemd[1]: Starting Remote File Systems.
[ 5.264630] systemd[1]: Reached target Remote File Systems.
[ 5.264663] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.265007] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.265025] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.265058] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.265067] systemd[1]: Starting Paths.
[ 5.265331] systemd[1]: Reached target Paths.
[ 5.265342] systemd[1]: Starting Encrypted Volumes.
[ 5.265614] systemd[1]: Reached target Encrypted Volumes.
[ 5.265625] systemd[1]: Expecting device dev-sda3.device...
[ 5.265819] systemd[1]: Expecting device dev-sda6.device...
[ 5.266013] systemd[1]: Starting Root Slice.
[ 5.275815] systemd[1]: Created slice Root Slice.
[ 5.275829] systemd[1]: Starting User and Session Slice.
[ 5.276279] systemd[1]: Created slice User and Session Slice.
[ 5.276291] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.276593] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.276604] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.276899] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.276910] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.277203] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.277213] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.277507] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.277518] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.277808] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.277824] systemd[1]: Starting udev Kernel Socket.
[ 5.278109] systemd[1]: Listening on udev Kernel Socket.
[ 5.278123] systemd[1]: Starting udev Control Socket.
[ 5.278410] systemd[1]: Listening on udev Control Socket.
[ 5.278424] systemd[1]: Starting Journal Socket.
[ 5.278716] systemd[1]: Listening on Journal Socket.
[ 5.278736] systemd[1]: Starting System Slice.
[ 5.279185] systemd[1]: Created slice System Slice.
[ 5.279201] systemd[1]: Starting File System Check on Root Device...
[ 5.279858] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.280411] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.371945] systemd[1]: Mounting Temporary Directory...
[ 5.379927] systemd[1]: Starting system-getty.slice.
[ 5.380442] systemd[1]: Created slice system-getty.slice.
[ 5.414498] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.477478] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.477515] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.503309] systemd[1]: Started Load Kernel Modules.
[ 5.503363] systemd[1]: Starting Apply Kernel Variables...
[ 5.504202] systemd[1]: Mounting Configuration File System...
[ 5.504898] systemd[1]: Mounted FUSE Control File System.
[ 5.504935] systemd[1]: Mounting Huge Pages File System...
[ 5.505656] systemd[1]: Mounting Debug File System...
[ 5.506353] systemd[1]: Starting Setup Virtual Console...
[ 5.507155] systemd[1]: Starting udev Coldplug all Devices...
[ 5.507863] systemd[1]: Starting Journal Service...
[ 5.508912] systemd[1]: Started Journal Service.
[ 5.600542] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 5.836201] systemd-udevd[175]: starting version 216
[ 6.237023] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 6.237029] ACPI: Power Button [PWRB]
[ 6.237089] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 6.237092] ACPI: Power Button [PWRF]
[ 6.393110] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20140424/utaddress-258)
[ 6.393118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.393146] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.403316] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.624551] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.697197] sound hdaudioC0D0: ALC1200: SKU not ready 0x411111f0
[ 6.697713] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.697715] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.697718] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.697720] sound hdaudioC0D0: mono: mono_out=0x0
[ 6.697722] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 6.697724] sound hdaudioC0D0: inputs:
[ 6.697726] sound hdaudioC0D0: Front Mic=0x19
[ 6.697729] sound hdaudioC0D0: Rear Mic=0x18
[ 6.697731] sound hdaudioC0D0: Line=0x1c
[ 6.697732] sound hdaudioC0D0: dig-in=0x1f
[ 6.702189] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 6.709310] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.717944] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
[ 6.718325] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.718367] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.718409] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.718451] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.718493] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 6.718576] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.718699] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.718743] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.728756] microcode: CPU0 sig=0x10677, pf=0x10, revision=0x705
[ 6.780564] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 6.802218] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.802227] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 6.802531] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
[ 6.802745] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90010736000, 00:24:8c:13:67:78, XID 1c4000c0 IRQ 45
[ 6.802748] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 6.815163] microcode: CPU1 sig=0x10677, pf=0x10, revision=0x705
[ 6.815200] microcode: CPU2 sig=0x10677, pf=0x10, revision=0x705
[ 6.815216] microcode: CPU3 sig=0x10677, pf=0x10, revision=0x705
[ 6.815650] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.852178] iTCO_vendor_support: vendor-support=0
[ 6.951618] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.951664] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[ 6.952163] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.961276] systemd-udevd[183]: renamed network interface eth0 to enp2s0
[ 6.962065] mousedev: PS/2 mouse device common for all mice
[ 7.539521] Adding 4051964k swap on /dev/sda3. Priority:-1 extents:1 across:4051964k FS
[ 8.405763] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.687024] systemd-journald[157]: Received request to flush runtime journal from PID 1
[ 9.356701] floppy0: no floppy controllers found
[ 10.274611] r8169 0000:02:00.0 enp2s0: link down
[ 10.274665] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 11.871962] r8169 0000:02:00.0 enp2s0: link up
[ 11.871971] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
Due to the length of the above logs I looked for a option to upload them but could not find the button for this, my appologies. Would anyone be able to see where I am going wrong?
Last edited by meschael (2014-09-18 04:16:08)

The first code block contains my Xorg.0.log however I just tryed modprove nvidia and recieved FATAL: Module nvidia not found. which I discovered was solved by someone here https://bbs.archlinux.org/viewtopic.php?pid=961852 however when I tryed to do a pacman -S nvidia nvidia-utils I get a unresolved confilict with nvidia-304xx-utils which after trying to remove with pacman -Rs shows dependencies with cario, Im not sure how far back I should start removing things to solve this conflict or how to go abouts solving it
+++++++++
Update: Solved
+++++++++
I did some more looking and found I could force the uninstall of nvidia-304xx-lts with pacman -Rdds nvidia-304xx-lts and after revisiting the Nvidia page on the wiki for the dozenth time I started thinking maybe I needed nvidia-304xx oposed to the lts release as google as kindly pointed out lts is long term support and maybe my kernel was not lts and thus conflicting. This turned out to be the case, after removing the ofending lts version of the driver, replacing with the correct nvidia-304xx , another nvidia-xconfig and reboot followed by modprobe nvida and startxfce4 my wounderfull xfce is now running as I type this messsage in firefox. Thank you for you help, as you asking about the modprobe output caused the chain of events leading to the success.
Last edited by meschael (2014-09-18 04:15:30)

New to fios - HD soft looking and remote question

Just got FIOS installed yesterday. I'm an IT Tech for a living so I've gone through a bunch of settings and options and not matter what the HD picture looks about 10% or more softer than the picture I had with Optimum. I have a 52" 1080 lcd. I've tried hdmi and composite, I've made sure the box is set to 1080i, I've raised the boxes sharpness setting to max, etc. Where should I go from here?
Also, the remote... With both the FIOS one and my logitech harmony if I'm watching a channel and hit the UP arrow to see what's on the next channel it goes down and vice versa. Why do the arrow keys work opposite?? Never did this on optimum. In case I'm not clear enough... If I scroll down with the arrow keys it scrolls up in the channel list - 800, 801, 802, etc. If I scroll up with the up arrow it goes 800, 799, 798, etc.
Rev.

Rev2010 wrote:
Just got FIOS installed yesterday. I'm an IT Tech for a living so I've gone through a bunch of settings and options and not matter what the HD picture looks about 10% or more softer than the picture I had with Optimum. I have a 52" 1080 lcd. I've tried hdmi and composite, I've made sure the box is set to 1080i, I've raised the boxes sharpness setting to max, etc. Where should I go from here?
Also, the remote... With both the FIOS one and my logitech harmony if I'm watching a channel and hit the UP arrow to see what's on the next channel it goes down and vice versa. Why do the arrow keys work opposite?? Never did this on optimum. In case I'm not clear enough... If I scroll down with the arrow keys it scrolls up in the channel list - 800, 801, 802, etc. If I scroll up with the up arrow it goes 800, 799, 798, etc.
Rev.
If you think you're viewing HD channels using a composite connection then you're seeing an SD version of that channel. Composite is only SD. The sharpness setting only applies to SD signals. Have you reset the settings on the TV itself? They probably will need to be different from your old provider since the signals are not precisely the same. Also, make sure your SD override is set to off.
The guide scrolls as it is shown on the screen, which is a lower channel number above a higher channel number. The "next" channel you expect to see may be higher in number but below the current item on the guide, and that's the way it scrolls -- down the guide, not up it. Up shows a lower channel in the guide.

[SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Hi!
I'm having problems with Bumblebee from Kernel 3.10 but I read that Kernel 3.11 solved the problem, I searched and tried possible solutions to my problem unsuccessfully
The message shows me when I run "optirun":
[ 5454.262739] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.
[ 5454.262776] [ERROR]Aborting because fallback start is disabled.
I've tried with wiki's solutions, forums solutions...
Configurations files:
/etc/bumblebee/bumblebee.conf:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=virtualgl
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
/etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00.0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
lspci |grep NVIDIA:
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 640M] (rev a1)
I hope can help me
Thanks!
Last edited by surrealistic (2013-11-04 18:46:35)

My /var/log/Xorg.8.log:
[ 337.161]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 337.161] X Protocol Version 11, Revision 0
[ 337.161] Build Operating System: Linux 3.11.6-1-ARCH x86_64
[ 337.161] Current Operating System: Linux h131h-laptop 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
[ 337.161] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4eb69984-2228-4aba-9863-28a7fa854e51 rw quiet
[ 337.161] Build Date: 01 November 2013 05:10:48PM
[ 337.161]
[ 337.161] Current version of pixman: 0.30.2
[ 337.161] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 337.161] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 337.161] (==) Log file: "/var/log/Xorg.8.log", Time: Mon Nov 4 14:20:04 2013
[ 337.161] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 337.161] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 337.161] (==) ServerLayout "Layout0"
[ 337.161] (==) No screen section available. Using defaults.
[ 337.161] (**) |-->Screen "Default Screen Section" (0)
[ 337.161] (**) | |-->Monitor "<default monitor>"
[ 337.161] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 337.161] (**) | |-->Device "DiscreteNvidia"
[ 337.161] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 337.161] (**) Option "AutoAddDevices" "false"
[ 337.161] (**) Option "AutoAddGPU" "false"
[ 337.161] (**) Not automatically adding devices
[ 337.161] (==) Automatically enabling devices
[ 337.161] (**) Not automatically adding GPU devices
[ 337.161] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 337.162] Entry deleted from font path.
[ 337.162] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 337.162] Entry deleted from font path.
[ 337.162] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 337.162] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 337.162] Entry deleted from font path.
[ 337.162] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 337.162] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 337.162] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 337.162] (==) |-->Input Device "<default pointer>"
[ 337.162] (==) |-->Input Device "<default keyboard>"
[ 337.162] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 337.162] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 337.162] (II) Loader magic: 0x7fdc20
[ 337.162] (II) Module ABI versions:
[ 337.162] X.Org ANSI C Emulation: 0.4
[ 337.162] X.Org Video Driver: 14.1
[ 337.162] X.Org XInput driver : 19.1
[ 337.162] X.Org Server Extension : 7.0
[ 337.162] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 337.162] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 337.162] setversion 1.4 failed
[ 337.163] (--) PCI:*(0:1:0:0) 10de:0fd2:1025:0648 rev 161, Mem @ 0xb2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128
[ 337.163] Initializing built-in extension Generic Event Extension
[ 337.163] Initializing built-in extension SHAPE
[ 337.163] Initializing built-in extension MIT-SHM
[ 337.163] Initializing built-in extension XInputExtension
[ 337.163] Initializing built-in extension XTEST
[ 337.163] Initializing built-in extension BIG-REQUESTS
[ 337.163] Initializing built-in extension SYNC
[ 337.163] Initializing built-in extension XKEYBOARD
[ 337.163] Initializing built-in extension XC-MISC
[ 337.163] Initializing built-in extension SECURITY
[ 337.163] Initializing built-in extension XINERAMA
[ 337.163] Initializing built-in extension XFIXES
[ 337.163] Initializing built-in extension RENDER
[ 337.163] Initializing built-in extension RANDR
[ 337.164] Initializing built-in extension COMPOSITE
[ 337.164] Initializing built-in extension DAMAGE
[ 337.164] Initializing built-in extension MIT-SCREEN-SAVER
[ 337.164] Initializing built-in extension DOUBLE-BUFFER
[ 337.164] Initializing built-in extension RECORD
[ 337.164] Initializing built-in extension DPMS
[ 337.164] Initializing built-in extension X-Resource
[ 337.164] Initializing built-in extension XVideo
[ 337.164] Initializing built-in extension XVideo-MotionCompensation
[ 337.164] Initializing built-in extension XFree86-VidModeExtension
[ 337.164] Initializing built-in extension XFree86-DGA
[ 337.164] Initializing built-in extension XFree86-DRI
[ 337.164] Initializing built-in extension DRI2
[ 337.164] (II) LoadModule: "glx"
[ 337.164] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 337.172] (II) Module glx: vendor="NVIDIA Corporation"
[ 337.172] compiled for 4.0.2, module version = 1.0.0
[ 337.172] Module class: X.Org Server Extension
[ 337.172] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
[ 337.172] Loading extension GLX
[ 337.172] (II) LoadModule: "nvidia"
[ 337.172] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 337.172] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 337.172] compiled for 4.0.2, module version = 1.0.0
[ 337.172] Module class: X.Org Video Driver
[ 337.172] (II) LoadModule: "mouse"
[ 337.172] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 337.172] (II) Module mouse: vendor="X.Org Foundation"
[ 337.172] compiled for 1.14.0, module version = 1.9.0
[ 337.172] Module class: X.Org XInput Driver
[ 337.172] ABI class: X.Org XInput driver, version 19.1
[ 337.172] (II) LoadModule: "kbd"
[ 337.173] (WW) Warning, couldn't open module kbd
[ 337.173] (II) UnloadModule: "kbd"
[ 337.173] (II) Unloading kbd
[ 337.173] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 337.173] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
[ 337.173] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 337.173] (--) using VT number 1
[ 337.173] (II) Loading sub module "fb"
[ 337.173] (II) LoadModule: "fb"
[ 337.173] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 337.173] (II) Module fb: vendor="X.Org Foundation"
[ 337.173] compiled for 1.14.4, module version = 1.0.0
[ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
[ 337.173] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 337.173] (II) Loading sub module "wfb"
[ 337.173] (II) LoadModule: "wfb"
[ 337.173] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 337.173] (II) Module wfb: vendor="X.Org Foundation"
[ 337.173] compiled for 1.14.4, module version = 1.0.0
[ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
[ 337.173] (II) Loading sub module "shadow"
[ 337.173] (II) LoadModule: "shadow"
[ 337.173] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 337.173] (II) Module shadow: vendor="X.Org Foundation"
[ 337.173] compiled for 1.14.4, module version = 1.1.0
[ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
[ 337.173] (II) Loading sub module "ramdac"
[ 337.173] (II) LoadModule: "ramdac"
[ 337.173] (II) Module "ramdac" already built-in
[ 337.174] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 337.174] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 337.174] (==) NVIDIA(0): RGB weight 888
[ 337.174] (==) NVIDIA(0): Default visual is TrueColor
[ 337.174] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 337.174] (**) NVIDIA(0): Option "NoLogo" "true"
[ 337.174] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 337.174] (**) NVIDIA(0): Option "UseEDID" "false"
[ 337.174] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 337.174] (**) NVIDIA(0): Enabling 2D acceleration
[ 337.174] (**) NVIDIA(0): Ignoring EDIDs
[ 337.174] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 337.174] (**) NVIDIA(0): mode
[ 341.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 341.309] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 341.309] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 341.309] (EE) NVIDIA(0): README for additional information.
[ 341.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 341.309] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 341.309] (II) UnloadModule: "nvidia"
[ 341.309] (II) UnloadSubModule: "shadow"
[ 341.309] (II) UnloadSubModule: "wfb"
[ 341.309] (II) UnloadSubModule: "fb"
[ 341.309] (EE) Screen(s) found, but none have a usable configuration.
[ 341.309] (EE)
Fatal server error:
[ 341.309] (EE) no screens found(EE)
[ 341.309] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 341.309] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 341.309] (EE)
[ 341.309] (EE) Server terminated with error (1). Closing log file.
dmesg |grep bbswitch:
[ 13.570577] bbswitch: version 0.7
[ 13.570585] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 13.570591] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 13.570687] bbswitch: detected an Optimus _DSM function
[ 13.570741] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 13.572354] bbswitch: disabling discrete graphics
[ 261.419114] bbswitch: enabling discrete graphics
[ 278.445698] bbswitch: disabling discrete graphics
[ 279.055257] bbswitch: enabling discrete graphics
[ 286.292315] bbswitch: disabling discrete graphics
[ 291.911052] bbswitch: enabling discrete graphics
[ 310.011289] bbswitch: disabling discrete graphics
[ 336.982794] bbswitch: enabling discrete graphics
[ 349.526470] bbswitch: enabling discrete graphics
I used "rcutree" option as shown in the post that you put, but I've deleted all changes made to use default configurations, because the solution of the post didn't work

Nvida and nouveau in harmony?

Similar Messages

Maybe you are looking for