Nvidia-1.0.7664 in [extra]

hi
new topic for new driver release.
please discuss driver issues here, that i can modify the wiki if it's necessary, and to get latest news on driver updates.
greetings
tpowa

freakyc wrote:
I also had the /dev/nvidiactl permissions error message. Did the chmod/chown thing, but I'm also running PAM so I get the error back after rebooting.
I checked for the two permissions files they mentioned, but I don't seem to have them, although I do have an /etc/security/ directory, but none of the files in there have a <dri> section.
Anyone know what I need to change to fix this without disabling PAM?
If im not totaly wrong, consider that I had a few beers , cant you just add your self to the video group?? I think that is what I did. Check your groups belonging with:
groups
If you not have video, edit your /etc/group file
cheeeeeeeeeeers all!!!!

Similar Messages

*solved* nvidia 8600GTS, xorg, and no extra power connected to card.

I just bought a 8600gts and found out I do not have a pci-e power connector on my PSU. I have an adapter being shipped. My question is, X will not run w/o giving me errors about the secondary power not being connected. Thing is, this card runs just as it should under Vista w/o the extra power. Is it possible to get X to start by telling it to ignore the error? And if so, how?
Last edited by somairotevoli (2008-05-08 18:03:46)

Thanks! I will give it a try. It's only a temp fix until the power adapter comes in:)
Edit:
Your solution worked, thanks again.
Last edited by somairotevoli (2008-05-08 18:04:15)

Nvidia-lts in extra?

It's a minor thing... but... It would be reeeeeaaaallllly cool if nvidia-lts was maintained in extra. Maybe the combination of kernel-lts and nvidia is not common but I do find for my needs that the lts kernel is easier to use because vmware is pretty slow at supporting newer kernels and for me vmware is a must. I've come to the conclusion that LTS is the path of least resistance for that type of install.
I would be willing to help with it if necessary. I'm not sure who is maintaining the package in AUR but so far the package has always been updated very quickly after a release of nvidia-utils... Thanks for that whoever you are ;-)
Cheers,
Neil

I'm maintaining the nvidia-lts PKGBUILD in AUR. I could add it in extra as there are other lts modules in extra. I'll ask first on dev ML to see if it's OK with everyone.

SDDM + nvidia-340xx = black screen - Failed to create OpenGL context

When I'm trying to use SDDM I see nothing but black screen (I see sddm and Xorg running).
It used to work some time ago, but one day it stopped.
I'm using nvidia-340xx drivers:
[travnick@travnick-lap ~]$ yaourt -Qs nvidia
community/cuda 7.0.28-2
NVIDIA's GPU programming toolkit
multilib/lib32-libvdpau 1.1-1
Nvidia VDPAU library
multilib/lib32-nvidia-340xx-libgl 340.76-1
NVIDIA drivers libraries symlinks (32-bit)
multilib/lib32-nvidia-340xx-utils 340.76-1
NVIDIA drivers utilities (32-bit)
extra/libcl 1.1-4
OpenCL library and ICD loader from NVIDIA
extra/libvdpau 1.1-1
Nvidia VDPAU library
extra/nvidia-340xx 340.76-9
NVIDIA drivers for linux, 340xx legacy branch
extra/nvidia-340xx-libgl 340.76-2
NVIDIA drivers libraries symlinks
extra/nvidia-340xx-utils 340.76-2
NVIDIA drivers utilities
extra/opencl-nvidia-340xx 340.76-2
OpenCL implemention for NVIDIA
journalctl says:
[travnick@travnick-lap ~]$ sudo journalctl -b |grep sddm
[sudo] hasło użytkownika travnick:
maj 22 16:29:14 travnick-lap sddm[1090]: Signal received: SIGUSR1
maj 22 16:29:15 travnick-lap sddm-helper[1126]: pam_unix(sddm-greeter:session): session opened for user sddm by (uid=0)
maj 22 16:29:15 travnick-lap systemd-logind[1084]: New session c1 of user sddm.
maj 22 16:29:15 travnick-lap systemd[1]: Started Session c1 of user sddm.
maj 22 16:29:15 travnick-lap systemd[1]: Starting Session c1 of user sddm.
maj 22 16:29:15 travnick-lap systemd[1128]: pam_unix(systemd-user:session): session opened for user sddm by (uid=0)
maj 22 16:29:15 travnick-lap systemd[1128]: systemd 219 running in user mode for user 999/sddm. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
maj 22 16:29:15 travnick-lap systemd[1128]: /var/lib/sddm/.config/systemd/user
maj 22 16:29:15 travnick-lap systemd[1128]: /var/lib/sddm/.local/share/systemd/user
maj 22 16:29:20 travnick-lap sddm-greeter[1132]: Failed to create OpenGL context for format QSurfaceFormat(version 2.0, options QFlags(), depthBufferSize 24, redBufferSize -1, greenBufferSize -1, blueBufferSize -1, alphaBufferSize -1, stencilBufferSize 8, samples -1, swapBehavior 2, swapInterval 1, profile 0)
maj 22 16:29:21 travnick-lap systemd-coredump[1140]: Process 1132 (sddm-greeter) of user 999 dumped core.
maj 22 16:30:33 travnick-lap polkitd[1102]: Operator of unix-process:4785:11656 FAILED to authenticate to gain authorization for action org.freedesktop.systemd1.manage-units for system-bus-name::1.10 [systemctl restart sddm] (owned by unix-user:travnick)
maj 22 16:30:45 travnick-lap sudo[4792]: travnick : TTY=tty2 ; PWD=/home/travnick ; USER=root ; COMMAND=/usr/bin/systemctl restart sddm
maj 22 16:30:45 travnick-lap sddm[1090]: Signal received: SIGTERM
maj 22 16:30:47 travnick-lap sddm[4800]: Signal received: SIGUSR1
maj 22 16:30:47 travnick-lap sddm-helper[4807]: pam_unix(sddm-greeter:session): session opened for user sddm by (uid=0)
maj 22 16:30:47 travnick-lap systemd[1]: Started Session c3 of user sddm.
maj 22 16:30:47 travnick-lap systemd-logind[1084]: New session c3 of user sddm.
maj 22 16:30:47 travnick-lap systemd[1]: Starting Session c3 of user sddm.
maj 22 16:30:48 travnick-lap sddm-greeter[4809]: Failed to create OpenGL context for format QSurfaceFormat(version 2.0, options QFlags(), depthBufferSize 24, redBufferSize -1, greenBufferSize -1, blueBufferSize -1, alphaBufferSize -1, stencilBufferSize 8, samples -1, swapBehavior 2, swapInterval 1, profile 0)
maj 22 16:30:48 travnick-lap systemd-coredump[4817]: Process 4809 (sddm-greeter) of user 999 dumped core.
maj 22 16:31:07 travnick-lap sudo[4819]: travnick : TTY=tty2 ; PWD=/home/travnick ; USER=root ; COMMAND=/usr/bin/systemctl stop sddm
maj 22 16:31:07 travnick-lap sddm[4800]: Signal received: SIGTERM
maj 22 16:31:21 travnick-lap sudo[4832]: travnick : TTY=tty2 ; PWD=/home/travnick ; USER=root ; COMMAND=/usr/bin/systemctl disable sddm
Last edited by travnick (2015-06-02 23:25:58)

It's working for me, I'm on 340xx nvidia drivers and using sddm+plasma. I even have nouveau installed in parallel (blacklisted).
I don't know if it makes any difference, but I'm using the -ck variant of the kernel and the nvidia driver. libgl part is still the same though:
$ pacman -Qs nvidia
local/lib32-libcl 1.1-1
OpenCL library and ICD loader from NVIDIA (32-bit)
local/lib32-nvidia-340xx-libgl 340.76-1
NVIDIA drivers libraries symlinks (32-bit)
local/lib32-nvidia-340xx-utils 340.76-1
NVIDIA drivers utilities (32-bit)
local/libcl 1.1-4
OpenCL library and ICD loader from NVIDIA
local/libvdpau 1.1-1
Nvidia VDPAU library
local/nvidia-340xx-ck-k10 340.76-11 (ck-k10)
NVIDIA drivers for linux-ck, 340xx legacy branch.
local/nvidia-340xx-libgl 340.76-2
NVIDIA drivers libraries symlinks
local/nvidia-340xx-utils 340.76-2
NVIDIA drivers utilities
local/opencl-nvidia-340xx 340.76-2
OpenCL implemention for NVIDIA
local/xf86-video-nouveau 1.0.11-3 (xorg-drivers xorg)
Open Source 2D acceleration driver for nVidia cards

[SOLVED] Error after using pacman -Sy nvidia

I am having problems with pacman. After getting xorg with pacman -S xorg and then doing pacman -s xf86-input-mouse (I think there was an ftp error with that package first of all, however, when I ran it it didn't seem to need to download the package)
I then did pacman -Sy nvidia and it updated the extra repository and then printed this error:
looking for inter-conflicts... Internal pacman error: Segmentation fault
Please submit a full bug report, with the given package if appropriate.
Pacman still works for other packages however for, once I removed /tmp/pacman.lck
I was able to do pacman -S joe with no problems.
I am using pacific.com.au as my repository and Pacman 3.0.6. I also
get the error; "warning: current locale is invalid, using default "C" locale"
Any advice would be appreciated.
Last edited by Phineas (2008-03-17 21:18:01)

Phineas wrote:Thankyou. I upgraded everything and was able to install nvidia perfectly. I'm now using TWM until I find the perfect window manager.
Let me know when you find it!

Possible to Use Radeon 4870 AND EVGA NVIDIA GTX 285 at the Same Time?

Hello,
I just tried to connect a second 30 inch Cinema display to my early 2009 8-core MacPro with a Radeon 4870 card.
The second display maxes out at 1280 x 800 resolution.
I think that is a function of the second port on the 4870, rather than a limitation of the card itself.
To get around this, I ordered the EVGA NVIDIA GTX 285. At $499, that's a big yikes.
Here is my question: Will I get better performance running one 30 inch from the Radeon, and the second from the Nvidia? Can I even install both at the same time? Or should I remove the Radeon and use just the Nvidia?
FWIW, I use this Mac for Photoshop and other image software, and for some stats work. No games. I am using CS4, which would never recognize my 4870. Maybe I will do better with the EVGA NVIDIA GTX 285?
I would appreciate any and all help on this!
Thanks!
Charles

I just tried to connect a second 30 inch Cinema display to my early 2009 8-core MacPro with a Radeon 4870 card.
Are you using the Mini DisplayPort to Dual-Link DVI Adapter?
<http://store.apple.com/us/product/MB571Z/A?fnode=MTY1NDA5OQ&mco=MjkyNjI0Mg>
The second display maxes out at 1280 x 800 resolution.
That's the resolution the 30" will run at with a single-link DVI connection.
I think that is a function of the second port on the 4870, rather than a limitation of the card itself.
It depends on the adapter you use.
To get around this, I ordered the EVGA NVIDIA GTX 285. At $499, that's a big yikes.
It has twice the graphics memory, so may be better if you are processing lots of large images at once.
Here is my question: Will I get better performance running one 30 inch from the Radeon, and the second from the NVIDIA?
No. For only two displays, one card is better because it can handle moving windows between displays, or windows spanning both displays. With the displays on different cards, the main computer has to do more work. Even if the windows are never going to cross display boundaries, there is no way for the applications to know that, so they won't let the graphics cards do as much as they could.
Can I even install both at the same time?
No. There are only two auxiliary power connectors, and one card will use both.
Or should I remove the Radeon and use just the NVIDIA?
Try each card and see which gives the best results with your applications.
FWIW, I use this Mac for Photoshop and other image software, and for some stats work. No games. I am using CS4, which would never recognize my 4870. Maybe I will do better with the EVGA NVIDIA GTX 285?
The extra video RAM may give better performance with lors of large images.

Bridge crashed on opening folder with .mpeg

Does not matter if the Bridge is opened as a standalone or within Premiere or AE it craches as soon as i try to open a folder containing .mpeg files.
The files are captured with Premeire CS4 straight from a HDV camera.
Vista 64, Intel i7 940, 12 gig, Nvidia 260, 4 HDD.

The extra period would come from a typing error when modifying a file name. For example if you changed fish.mpeg to fish24.mpeg if you insered wrong it could end up fish.24.mpeg. Or if you have the show suffix turned off in windows you could end up with fish24.mpeg.mpeg. They would both have errors and may cause problems.
Just a thought.
I think it unusual that WE does not show thumbnails. I checked my mpeg files and I have thumbs in WE and Bridge. Might want to look into this closer, maye it is something to do with the camera and codex (think that is the term). Really do not know much on video, but again another thought to consider.

X freezes with enabled desktop effects

Hello,
since today, the X-server freezes shortly after logging into my desktop environment (KDE 4.6.2). Here's a backtrace from the log:
[ 772.951] (EE) NVIDIA(0): Failed to allocate 2D engine
[ 772.951] (EE) NVIDIA(0): *** Aborting ***
[ 772.951] (EE) NVIDIA(0): Failed to allocate 2D objects
[ 772.951] (EE) NVIDIA(0): *** Aborting ***
[ 772.951] (EE) NVIDIA(0): Error recovery failed.
[ 772.951] (EE) NVIDIA(0): *** Aborting ***
[ 822.509] [mi] EQ overflowing. The server is probably stuck in an infinite loop.
[ 822.509]
Backtrace:
[ 822.576] 0: /usr/bin/X (xorg_backtrace+0x28) [0x49f598]
[ 822.576] 1: /usr/bin/X (mieqEnqueue+0x1f4) [0x49e994]
[ 822.576] 2: /usr/bin/X (xf86PostMotionEventM+0x97) [0x47bd57]
[ 822.576] 3: /usr/bin/X (xf86PostMotionEvent+0xde) [0x47bf6e]
[ 822.576] 4: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f36e2576000+0x30f4) [0x7f36e25790f4]
[ 822.576] 5: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f36e2576000+0x4c0e) [0x7f36e257ac0e]
[ 822.576] 6: /usr/bin/X (0x400000+0x696c7) [0x4696c7]
[ 822.576] 7: /usr/bin/X (0x400000+0x11b933) [0x51b933]
[ 822.576] 8: /lib/libpthread.so.0 (0x7f36e42ee000+0xf750) [0x7f36e42fd750]
[ 822.576] 9: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f36dea5e000+0x768dd) [0x7f36dead48dd]
[ 822.576] 10: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f36dea5e000+0x78520) [0x7f36dead6520]
[ 822.576] 11: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f36dea5e000+0x77105) [0x7f36dead5105]
[ 822.576] 12: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f36dea5e000+0xdecc2) [0x7f36deb3ccc2]
[ 822.576] 13: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f36dea5e000+0xcb665) [0x7f36deb29665]
[ 822.576] 14: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f36dea5e000+0x454f8b) [0x7f36deeb2f8b]
[ 822.576] 15: /usr/bin/X (0x400000+0xda3e3) [0x4da3e3]
[ 822.576] 16: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f36dea5e000+0x455d53) [0x7f36deeb3d53]
[ 822.576] 17: /usr/bin/X (0x400000+0xd5a31) [0x4d5a31]
[ 822.576] 18: /usr/bin/X (0x400000+0x2d341) [0x42d341]
[ 822.577] 19: /usr/bin/X (0x400000+0x213ee) [0x4213ee]
[ 822.577] 20: /lib/libc.so.6 (__libc_start_main+0xed) [0x7f36e3274f6d]
[ 822.577] 21: /usr/bin/X (0x400000+0x20f99) [0x420f99]
Package versions:
extra/xorg-server 1.10.1-1
extra/nvidia 270.41.06-1
extra/xf86-input-synaptics 1.4.0-2
This doesn't happen with disabled desktop effects. Does anyone have an idea how to fix this?

I'm having a similar issue, but using only dwm with xcompmgr. It doesn't happen at startup, but at some point (in this instance, just a few minutes ago, after having run my computer for 14 hours), my touchpad froze, and not all my keys are acting as they should (for instance, Ctrl-G, to open the url bar with dmenu, in surf, stopped working). This is what I see in my Xorg.0.log:
[ 3289.403] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 51407.244] [mi] EQ overflowing. The server is probably stuck in an infinite loop.
[ 51407.244]
Backtrace:
[ 51407.244] 0: /usr/bin/X (xorg_backtrace+0x28) [0x49f598]
[ 51407.244] 1: /usr/bin/X (mieqEnqueue+0x1f4) [0x49e994]
[ 51407.244] 2: /usr/bin/X (xf86PostButtonEventM+0xaf) [0x47c25f]
[ 51407.244] 3: /usr/bin/X (xf86PostButtonEvent+0xed) [0x47c41d]
[ 51407.244] 4: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f0faab6a000+0x2a31) [0x7f0faab6ca31]
[ 51407.244] 5: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f0faab6a000+0x4c0e) [0x7f0faab6ec0e]
[ 51407.244] 6: /usr/bin/X (0x400000+0x696c7) [0x4696c7]
[ 51407.244] 7: /usr/bin/X (0x400000+0x11b933) [0x51b933]
[ 51407.244] 8: /lib/libpthread.so.0 (0x7f0faef87000+0xf750) [0x7f0faef96750]
[ 51407.244] 9: /lib/libc.so.6 (__select+0x13) [0x7f0fadfb8903]
[ 51407.244] 10: /usr/bin/X (WaitForSomething+0x19f) [0x459a1f]
[ 51407.244] 11: /usr/bin/X (0x400000+0x2d0c2) [0x42d0c2]
[ 51407.244] 12: /usr/bin/X (0x400000+0x213ee) [0x4213ee]
[ 51407.244] 13: /lib/libc.so.6 (__libc_start_main+0xed) [0x7f0fadf0df6d]
[ 51407.244] 14: /usr/bin/X (0x400000+0x20f99) [0x420f99]
I am using xf86-video-intel 2.15.0-1, xorg-server 1.10.1-1, and xf86-input-synaptics 1.4.0-2.
Last edited by Sara (2011-05-10 03:03:34)

Hiccups/hangs with pulseaudio and hd audio ALC883 (ClevoM570RU)

Hello guys,
well, as the topic already says, I'm having problems with pulseaudio combined with an ALC883 hd audio card
on a Clevo-M570RU. I got occassional hiccups and hangs and pulseaudio rewinds.
For some strange reason I can't kill pulseaudio without having it restart immediatley in the
current version of archlinux, but I can tell that prior versions showed that the wakeup timer of the pulseaudio
was increased steadily after buffer underruns occured.
Its quite rare that buffer underruns occur in which cases pulseaudio triggers a replay of the lost samples (resulting in a hiccup)
but I can trigger it about every 30-2mins secs with running flash in fullscreen (happens way less in normal window size mode).
Sometimes the general setup seems to be unstable, resulting in hiccups every like 10 secs, with increasing "severity".
So far I tried everything possible to fix this issue without any success so far. Maybe one of you guys has an insight into this.
So far I can only tell, that flash in fullscreen and also normal video playback in vlc (with VDPAU or without, fullscreen worse) trigger this issue way more often.
So chances are, this is triggered by the NVIDIA drivers, but the problem with that is, that I really need those for development work.
Also note that e.g. Ubuntu 9.04 did not trigger such an issue - maybe they had an workaround and didn't push it upstream (as usual).
More info:
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: snd_pcm_avail_delay() returned strange values: delay 0 is less than avail 8.
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: snd_pcm_dump():
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: Soft volume PCM
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: Control: PCM Playback Volume
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: min_dB: -51
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: max_dB: 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: resolution: 256
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: Its setup is:
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: stream : CAPTURE
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: access : MMAP_INTERLEAVED
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: format : S16_LE
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: subformat : STD
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: channels : 2
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: rate : 48000
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: exact rate : 48000 (48000/1)
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: msbits : 16
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: buffer_size : 16384
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_size : 8192
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_time : 170666
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: tstamp_mode : ENABLE
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_step : 1
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: avail_min : 15424
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_event : 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: start_threshold : -1
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: stop_threshold : 4611686018427387904
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: silence_threshold: 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: silence_size : 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: boundary : 4611686018427387904
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: Its setup is:
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: stream : CAPTURE
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: access : MMAP_INTERLEAVED
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: format : S16_LE
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: subformat : STD
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: channels : 2
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: rate : 48000
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: exact rate : 48000 (48000/1)
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: msbits : 16
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: buffer_size : 16384
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_size : 8192
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_time : 170666
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: tstamp_mode : ENABLE
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_step : 1
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: avail_min : 15424
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_event : 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: start_threshold : -1
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: stop_threshold : 4611686018427387904
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: silence_threshold: 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: silence_size : 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: boundary : 4611686018427387904
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: appl_ptr : 15432
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: hw_ptr : 15432
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: snd_pcm_avail_delay() returned strange values: delay 0 is less than avail 8.
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: snd_pcm_dump():
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: Soft volume PCM
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: Control: PCM Playback Volume
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: min_dB: -51
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: max_dB: 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: resolution: 256
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: Its setup is:
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: stream : CAPTURE
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: access : MMAP_INTERLEAVED
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: format : S16_LE
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: subformat : STD
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: channels : 2
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: rate : 48000
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: exact rate : 48000 (48000/1)
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: msbits : 16
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: buffer_size : 16384
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_size : 8192
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_time : 170666
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: tstamp_mode : ENABLE
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_step : 1
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: avail_min : 15424
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_event : 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: start_threshold : -1
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: stop_threshold : 4611686018427387904
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: silence_threshold: 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: silence_size : 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: boundary : 4611686018427387904
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: Its setup is:
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: stream : CAPTURE
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: access : MMAP_INTERLEAVED
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: format : S16_LE
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: subformat : STD
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: channels : 2
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: rate : 48000
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: exact rate : 48000 (48000/1)
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: msbits : 16
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: buffer_size : 16384
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_size : 8192
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_time : 170666
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: tstamp_mode : ENABLE
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_step : 1
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: avail_min : 15424
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_event : 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: start_threshold : -1
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: stop_threshold : 4611686018427387904
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: silence_threshold: 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: silence_size : 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: boundary : 4611686018427387904
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: appl_ptr : 138856
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: hw_ptr : 138856
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800M GTX] (rev a2)
06:00.0 Network controller: Intel Corporation WiFi Link 5100
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
0c:07.0 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller
0c:07.1 SD Host controller: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller
0c:07.3 FLASH memory: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller
0c:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
cat /etc/modprobe.d/alsa-base.conf
options snd-hda-intel model=clevo-m720
options snd-hda-intel power_save=0
options snd-hda-intel enable_msi=1
Note that these options were added for further tests, they make absolutely no difference to the problem when left out.
lsmod
Module Size Used by
cryptd 7709 0
aes_x86_64 7428 3
aes_generic 26314 1 aes_x86_64
ipv6 280810 20
btusb 11689 0
bluetooth 53970 1 btusb
fuse 64912 3
arc4 1394 2
cpufreq_ondemand 8716 0
nvidia 10084294 40
ecb 2057 2
snd_usb_audio 87191 2
acpi_cpufreq 5977 1
freq_table 2339 2 cpufreq_ondemand,acpi_cpufreq
mperf 1259 1 acpi_cpufreq
snd_usbmidi_lib 18484 1 snd_usb_audio
iwlagn 358041 0
snd_rawmidi 19525 1 snd_usbmidi_lib
iwlcore 92743 1 iwlagn
snd_seq_dummy 1479 0
snd_seq_oss 29368 0
snd_seq_midi_event 5516 1 snd_seq_oss
snd_seq 50594 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5281 4 snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 39669 0
snd_mixer_oss 17858 1 snd_pcm_oss
usbhid 36375 0
hid 77863 1 usbhid
joydev 10183 0
sg 25972 0
snd_hda_codec_si3054 3870 1
mac80211 199564 2 iwlagn,iwlcore
snd_hda_codec_realtek 295557 1
lirc_ite8709 5705 0
snd_hda_intel 21837 4
video 11923 0
output 1988 1 video
usb_storage 43276 0
uas 8170 0
sdhci_pci 7454 0
lirc_dev 9759 1 lirc_ite8709
snd_hda_codec 74609 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
uhci_hcd 22230 0
ac 3217 0
thermal 7890 0
processor 25265 3 acpi_cpufreq
container 2541 0
button 4882 0
battery 10279 0
firewire_ohci 26921 0
intel_agp 10504 0
cfg80211 139317 3 iwlagn,iwlcore,mac80211
intel_gtt 15215 1 intel_agp
psmouse 53237 0
firewire_core 49974 1 firewire_ohci
snd_hwdep 6222 2 snd_usb_audio,snd_hda_codec
r8169 36286 0
snd_pcm 72481 6 snd_usb_audio,snd_pcm_oss,snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec
snd_timer 19537 2 snd_seq,snd_pcm
snd 58938 26 snd_usb_audio,snd_usbmidi_lib,snd_rawmidi,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
ehci_hcd 37571 0
soundcore 6161 1 snd
mii 3842 1 r8169
usbcore 139048 9 btusb,snd_usb_audio,snd_usbmidi_lib,usbhid,usb_storage,uas,uhci_hcd,ehci_hcd
serio_raw 4566 0
pcspkr 1835 0
crc_itu_t 1313 1 firewire_core
sdhci 17174 1 sdhci_pci
shpchp 26725 0
i2c_i801 8230 0
wmi 8061 0
snd_page_alloc 7361 2 snd_hda_intel,snd_pcm
mmc_core 62378 1 sdhci
pci_hotplug 24655 1 shpchp
i2c_core 19078 2 nvidia,i2c_i801
evdev 9361 19
iTCO_wdt 10925 0
iTCO_vendor_support 1817 1 iTCO_wdt
rfkill 16122 2 bluetooth,cfg80211
ext3 125159 2
jbd 46953 1 ext3
mbcache 5802 1 ext3
sr_mod 15402 0
cdrom 36363 1 sr_mod
sd_mod 27120 4
pata_acpi 3296 0
ata_piix 21670 3
libata 169364 2 pata_acpi,ata_piix
scsi_mod 125814 6 sg,usb_storage,uas,sr_mod,sd_mod,libata
cat /etc/rc.conf | grep DAEMONS=
DAEMONS=(syslog-ng !network netfs dbus hal networkmanager !wicd alsa crond @postgresql irqbalance kdm)
Leaving out irqbalance doesn't change anything either.
uname -a
Linux - 2.6.37-ARCH #1 SMP PREEMPT Sat Jan 29 20:00:33 CET 2011 x86_64 Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz GenuineIntel GNU/Linux
yaourt -Q nvidia pulseaudio libvdpau
extra/nvidia 260.19.36-2
extra/pulseaudio 0.9.22-2
extra/libvdpau 0.4.1-1
extra/alsa-lib 1.0.23-2
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC883 Digital [ALC883 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Audio [USB Audio], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
I'd be really thankful for any hint that could lead to the solution of the problem.
Regards
apriori

If i run
modprobe snd_hda_intel vendor=0x10de product=0x0e0a
then this gets printed to the kernel log
[ 655.731520] snd_hda_intel: unknown parameter 'vendor' ignored
[ 655.731527] snd_hda_intel: unknown parameter 'product' ignored
[ 655.731856] hda_intel: Disabling MSI
[ 655.731871] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 656.739954] hda-intel 0000:01:00.1: Codec #0 probe error; disabling it...
I've tried vid, pid, vendor_id and product_id as parameters, none work. And if i issue modinfo on this module i can't really find a parameter that looks like vendor/product id.
The same happens if i try adding parameters to the loading of snd_hda_codec_hdmi.

Xorg does not start (timeouts) with "no screens found"

After years of my system working correctly, this has been happening for the last ten days.
Many times - not all of them - xorg does not start, and I get greated with the standard console login prompt.
Checking in /var/log/ the xorg.0.log, it says that "no screens found".
I am using an nvidia VGA with nvidia driver 190.xx from extra.
I am using KDE, from inittab (not with kdm as a deamon).
Initial xorg.conf used to be:
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "My Monitor"
Option "DPMS" "True"
Option "DPI" "96 x 96"
EndSection
Section "Device"
Identifier "My Graphics Card"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "My Graphics Card"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
Viewport 0 0
EndSubSection
Option "DPI" "96 x 96"
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
Now I have trimmed it down to:
Section "Device"
Identifier "My Graphics Card"
Driver "nvidia"
EndSection
But the problem remains.
The problem started ten days ago.
The previous night I had updated the following packages (I provide a section of pacman.log):
[2010-01-21 20:35] upgraded acct (6.3.2-2 -> 6.5.1-1)
[2010-01-21 20:35] upgraded coreutils (8.2-1 -> 8.4-1)
[2010-01-21 20:35] upgraded farsight2 (0.0.16-1 -> 0.0.17-1)
[2010-01-21 20:35] upgraded git (1.6.6-1 -> 1.6.6.1-1)
[2010-01-21 20:35] upgraded iproute2 (2.6.29-3 -> 2.6.31-1)
[2010-01-21 20:35] upgraded mkvtoolnix (3.0.0-1 -> 3.1.0-1)
[2010-01-21 20:35] upgraded psmisc (22.8-1 -> 22.10-1)
[2010-01-21 20:35] upgraded zlib (1.2.3.4-3 -> 1.2.3.4-4)
[2010-01-21 20:35] upgraded recordmydesktop (0.3.8.1-1 -> 0.3.8.1-2)
[2010-01-21 20:35] upgraded smbclient (3.4.4-1 -> 3.4.5-1.1)
[2010-01-21 20:35] upgraded samba (3.4.4-1 -> 3.4.5-1.1)
[2010-01-21 20:35] upgraded smartmontools (5.38-2 -> 5.39-1)
[2010-01-21 20:35] upgraded tzdata (2009t-1 -> 2010a-1)
[2010-01-21 20:35] upgraded whois (4.7.36-1 -> 5.0.0-1)
So since nothing on xorg was updated, maybe the new coreutils is the more likely suspect?

Zamboniman wrote:
arch_cy wrote:
skunktrader wrote:Did you reboot after installing nvidia?
no, i install nvidia and then xorg i try startx without result.
Right now i am from Ubuntu, i am going to install arch on virtualbox and i will answer to any other questions.
Thank you
The reason you were asked if you rebooted is because installing the nvidia driver also installs a kernel module. That kernel module
needs to be installed in the running kernel, either by invoking "depmod nvidia" or rebooting, providing everything installed correctly. You
may need to put the module name in your modules section of rc.conf and then reboot.
The absence of that kernel module explains your error message of not finding that kernel module. :-)
iirc the .install already does the depmod
Note to TS: if you use virtualbox you can't use your hosts video card so you will have to use the vboxvideo driver. So read the wiki about virtualbox

SOLVED:Beryl works; But white cube with XGL :(

Well, Beryl works with nVidia drivers, but lacks the extra "smoothness" that xgl can give. So I tried using xgl with KDE via method 1 and I also tried method 2, but it gives me the dreaded "white cube". (Seems to be a popular trouble, but googling it yields no useful info)
Any idea as to what I am doing wrong?
Last edited by Misfit138 (2007-04-21 22:02:24)

DaNiMoTh wrote:
You need to use the "--use-copy" option when you launch beryl.
Or, with beryl-manager, click Options--> Rendering path --> Copy.
DaNiMoTh:
I cannot thank you enough for this small, yet priceless bit of information. Please accept my thanks, I was battling with this for hours!
EDIT: An important setting to regard is to select window manager/Beryl (right click on Beryl gem in panel). The default seems to be Kwin, which gives slightly laggy/choppy movement.
Last edited by Misfit138 (2007-04-21 23:19:15)

Once gdm loads I cannot ctrl+alt+Fx to get a tty

Once gdm loads, I cannot ctrl+alt+Fx to get a tty. I just get a black screen where my logon screen used to be. I dunno what has changed on this system. I installed xfce4 to play with a bit but that is the only recent change. If I boot into mode 3 everything is fine until I load up X via xinitrc. This causes the same behavior (black screen when I hit ctrl+alt+Fx). Thoughts are appreciated!

graysky wrote:I tried both nvidia from [testing] and from [extra] with no change. Any idea which log I can look at? dmesg.log gives nothing; Xorg.log looks just fine.
I meant nouveau :-)
You know that nvidia drivers don't use KMS and there will be a couple seconds black screen before you get to the tty, right?

Lenovo ThinkPad T61 14,1" LCD problem

Hi, LCD in my T61 14,1" with nVidia graphics (T61 7664-18G) has failed - I attached an image. External LCD is 100% OK, just internal have this problem (like image in fog, bad readable). I try to replace LCD - problem is still there. What can be the solution? LCD cable, invertor, or it is a nVidia problem (but really just internal LCD problem)? Thanks for help.
Internal LCD (like in fog, no readable text - or very bad):
Link to picture
External LCD (vertical lines just in photo, everything is 100% OK):
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

xsuchy09 wrote:
Buy new/used mainboard with integrated Intel graphics (external display in dock width 1920x1200 will not be problem, second display with same resolution will be ok with intel graphic too I think, or?)? Buy another T61/T400 with Intel graphics (because of compatibility and old style keyboard) It is used only for programming, I think that I don't need graphics performance ... Are parts from T61 with nVidia graphics full compatible with parts with Intel graphics (when I will go this way I will have some replacement parts )? Or is it compatible T61 14,1" and T400 in main parts? What will be the best choice? Performance of T61 is sufficient for development of web applications etc.
If you don't need graphic performance and the T61 performance is enough for you I would buy an Intel T61 planar and replace the Nvidia one. RAM and CPU are compatible, but you will need an integrated heatsink since it's different than the discrete one you have now. I can't comment about driving two monitors, I guess you now use both VGA and DVI ports, right?
You can also re-use your hard drive or SSD and WLAN card.
If you go the T400 way (or even T410, it also has a non chiclet keyboard) you will be able to reuse the hard drive/ssd. RAM is not compatible! (DDR3 instead of DDR2)
Hope this helps!
Cheers
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество

Eclipse crashing

Hi all. I am currently developing a GUI for my software application.
I'm using Eclipse 3.1
It seems that most of the time, when I try to run my GUI, Eclipse will crash, giving me the following message:
JVM terminated. Exit code = 1
C:\Program Files\Java\j2re1.4.2_09\bin\javaw.exe
-Xms40m
-Xmx256m
-jar C:\Program Files\Eclipse\startup.jar
-os win32
-ws win32
-arch x86
-launcher C:\Program Files\Eclipse\eclipse.exe
-name Eclipse
-showsplash 600
-exitdata c20_10c
-vm C:\Program Files\Java\j2re1.4.2_09\bin\javaw.exe
-vmargs
-Xms40m
-Xmx256m
-jar C:\Program Files\Eclipse\startup.jar
An error log file is also generated, with the header as follows:
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x74c9dd88, pid=3940, tid=204
Can anyone enlighten me on what's causing the problem?
It does not happen all the time, but it's rather frequent, like 70-80%.

cookiecaper wrote:What driver and video card are you using?
lspci -v
01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300 GE] (rev a1) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device 060c
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at dc80 [size=128]
[virtual] Expansion ROM at fde00000 [disabled] [size=128K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nvidia
Kernel modules: nvidia, nouveau, nvidiafb
pacman -Ss
extra/nvidia 256.44-1 [installed]
extra/nvidia-utils 256.44-1 [installed]
I should also mention that I am running x86_64
uname -a
Linux darkside325 2.6.34-ARCH #1 SMP PREEMPT Wed Aug 11 00:23:15 CEST 2010 x86_64 Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz GenuineIntel GNU/Linux
Last edited by mmccaskill (2010-08-18 19:48:02)

Dmesg NVRM / VGA mode?

# dmesg | tail
[ 15.458823] NVRM: Your system is not currently configured to drive a VGA console
[ 15.458830] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 15.458834] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 15.458838] NVRM: drivers including, but not limited to, vesafb, may result in
[ 15.458841] NVRM: corruption and stability problems, and is not supported.
# cat /boot/grub/menu.lst (kernel line)
kernel /vmlinuz-linux root=/dev/sdb3 ro quiet vga=795 5
# uname -a
Linux desktop 3.4.2-2-ARCH #1 SMP PREEMPT Tue Jun 12 07:19:42 UTC 2012 i686 GNU/Linux
# lspvi -v
01:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9400 GT] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device 1413
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at dc80 [size=128]
[virtual] Expansion ROM at fea00000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nvidia
# pacman -Ss nvidia | grep installed
extra/libvdpau 0.4.1-2 [installed]
extra/nvidia 302.17-1 [installed]
extra/nvidia-utils 302.17-1 [installed]
Last edited by Kilzool (2012-06-18 15:54:12)

I remember this message from the first time i played around with the vga= kernel option long time ago. There is basically now way around it and I'm not sure if it does produce any problems afterall.
On my laptop I can only get what my bios allows as resolution (1024x768x32) on a 1280x800 display. Only way to get true native resolution is with nouveau and KMS.
Tried uvesafb and everything in the wiki but simply can't get any high than 1024x768. Syslinux Hardware Detection Tools also only listes this has the highest possible vga mode and provides the appropriate number for it.
Let's hope that NVIDA will support KMS in the future. Not only for prettier ttys but also for wayland.
Also like to use KMSCON in the future as kernel console replacement. Anti-Aliased hardware accelerated FullHD console Hello!
kmscon-git is already in the AUR.
Last edited by blackout23 (2013-02-08 22:02:34)

Nvidia-1.0.7664 in [extra]

Similar Messages

Maybe you are looking for