Nvidia 195.36.31-1 doesn't detect horizontal refresh rate correctly

With both the nvidia driver 195.36.15 that was in the main repositories before the last update, and the nvidia-beta driver 256.35-1from aur my monitor's horizontal refresh rate is detected correctly(129.5khz with a 120hz vertical refresh rate). However, the nvidia driver currently in the repositories 195.36.31-1 doesn't detect it correctly and forces a horizontal refresh rate of about 185khz. This causes horizontal white lines to be seen all along the screen.
I'm now happily using the beta driver from aur, but I can try to pinpoint the problem if someone can point me in the right direction.
thanks.

this is not a bug. this is a nvidia workaround so that xrandr is able to handle correctly multihead refresh rates. see the nvidia readme for details, and don't worry, the refresh rate is correct, else you would see garbage.
Last edited by lloeki (2007-04-28 20:50:16)

Similar Messages

IMac doesn't detect the base station correctly (with new base station)

I have a brand new Airport Express. I'm trying to connect to my iMac G5. Everything works fine in the start up with getting the green light on the Express base station. But, my iMac doesn't "connect" with the base station.
I try the "Airport Setup Assistant" and get a window that says "No new Airport networks were found."
I look at the "pie" at the top of the iMac screen. It has the white and black stripes on it. I click it and find "Apple Network e3fec9" and select it. The signal level shown has all blue buttons. That window also reports "Status: Connected to 'Apple Network e3fec9'" and "Base Station ID:00:19:E3:E3:FE:C9". That's what makes me think that my problem must be in the iMac and not the base station.
I had also tried my Dell laptop (from work) and found that it found the internet network. It detected the "local host" and "Apple Network" and the signal strength was very good (~90% or so). The only problem was that the laptop thought it needed to recreate an IP address before it could connect to the internet. I didn't do that, since I saw it was detecting the network.
Please help. Why should this be so hard?
iMac Mac OS X (10.4.9) none

I'm confused. You say you're connected to "Apple Network e3fec9", and you're having trouble connecting your iMac? It sounds like you've managed to connect to your Airport Base Station.
Have you configured the Internet settings for the base station? Try this:
1. Launch Airport Admin Utility (in /Applications/Utilities/) select "Apple Network e3fec9" and click Configure.
2. Under the Airport tab, give the base station a name, click the Base Station Options… button, and make sure Enable Ethernet Port is checked.
3. Select Create a Wireless Network (Home Router) if it isn't already selected, give your network a name, and check Create a closed network
4.Click the Wireless Security button and set it to WPA Personal, and enter a password.
5. Under the Internet tab, set Connect Using: to Ethernet, and in the Configure dropdown, select Using DHCP
6. Click the Access Control tab and click the plus button on the right side of the window. In the panel that pops up, click the This Computer button.
7. Click Update
I'm hoping it's something simple, like Enable Ethernet Port wasn't checked or something, and not something more serious.
Hope it helps.
Rob
17 iMac G5 Mac OS X (10.4.2)
17 iMac G5 Mac OS X (10.4.2)
17 iMac G5 Mac OS X (10.4.2)
17 iMac G5 Mac OS X (10.4.2)

U430 Touch doesn't detect second monitor

I recently got a U430 but, when I connect it to my Dell S2240L monitor using an HDMI cable, the U430 doesn't detect it. I've tested the monitor and cable. The display driver that came on the machine is from Intel (version 10.18.10.3379). The supported display driver listed on the Lenovo site is also from Intel but for an earlier version (10.18.10.3277). I've read a number of threads about a second monitor not being detected. Hase anyone else seen this?
Solved!
Go to Solution.

Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that your U430 Touch Laptop is not connecting to the External Monitor, the issue should resolve if the latest display driver is installed in the computer, below are the link to automatically scan the computer and install the relevant driver from Intel and Nvidia:
Intel display driver auto detect
NVIDIA graphics driver auto detect
Hope this helps!!!
Do post us back if the issue persists
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

How can I print from iPad to a Brother printer with a TP-link tl-wps510u connected to it without using a computer? It doesn't detect the printer.

I have a Brother printer that doesn't have wifi, but I bought a Wireless Server Print to connect to it. I want the iPad can print directly to the printer without using a computer, but the iPad doesn't detect the printer. Is that possible?

javigomez88 wrote:
I know that Brother has an app that works with its wireless printers, even if they are not airprint. My printer isn't wireless, is a wireless print server attached to the printer what is able to make this printer wireless. Could this app be a solution or only would work with the wireless Brother printers?
The Apps usually only work with wireless printers, though if its free, there is no harm in trying, and see if it gets picked up, but its doubtful, as the print server would need to transmit in the same protocol the Brother Print App is expecting from the supported wireless printers.

HT5167 after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

What is apple doing. This macbook pro doesn't detect external display, doesn't detect my wacom..

This is awsome. Cant work on this laptop... Doesn´t detect nothing.

Hey there mrlrsm,
Welcome to Apple Support Communities.
The article below provides troubleshooting tips that may help you resolve the issue with your MacBook Pro no longer recognizing the external display.
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Ciao,
-Jason

My MacBook Pro 13.3inch (Late 2011) doesn't detect earphones.

My MacBook Pro 13.3inch (Late 2011) doesn't detect earphones being plugged in after I installed Mountain Lion. If I reboot, it works but after a few unpluggings and more plugins, it doesn't detect them anymore until I reboot. Help please.

This may or may not fix your problem.
Try a NVRAM reset.
Try a SMC reset.
If neither work, you're just going to have to take your unit into your local Apple Store or AASP and see if you've a hardware issue.
Good luck,
Clinton

Since last update on itunes, my PC doesn't detect any of my devices. HELP!

Since I downloaded the last version of iTunes my PC doesn't detect any of my devices (ipad, ipod, iphone). Have been connecting my devices to the PC, when opening iTunes there is a legend, with the ipod saying that itunes doesnt detect the device to uninstall itunes and reinstall, have done it twice and the problem is still there. Just bought a new ipad and when I connect it to the PC iTunes doesnt detect it. When connecting my iPhone same thing happens, when I try to export the photos to the PC the folder where the photos are suppossed to be has no photos

Hello andreaparra,
Thanks for using Apple Support Communities.
I found the following article that will help you in resolving this issue, where none of your devices are being recognized by iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you get to the part where it asks you to uninstall iTunes, even though you have done it before, be sure to uninstall iTunes and the other components in the order listed.
Take care,
Alex H.

MacBook Pro doesn't detect tv as display.

MacBook Pro doesn't detect tv as display when connected via Mini Display Port to HDMI adapter.

Hi l,
Is it possible to try another adapter? There have been a number of posts here about faulty adapters. Also, have you checked in Display Preferences? Selected the proper input on the TV?

[SOLVED] CUPS doesn't detect USB Samsung ML-2010 printer

Hi. I only speak a little English. Sorry for that.
I have got an USB Samsung ML-2010 printer. Before I used cups-usblp from AUR, and it worked. But it doesn't work now. The cups-usblp maintainer suggests to use cups instead of cups-usblp. Searching with google, it appears that other people don't have problems with this printer, cups, and archlinux. But I do. Cups' web interface doesn't detect it.
Well, this is how are the things now:
$ lsusb | grep Samsung
Bus 002 Device 004: ID 04e8:326c Samsung Electronics Co., Ltd ML-2010P Mono Laser Printer
$ ls -l /dev/bus/usb/002/004
crw-rw-r-- 1 root lp 189, 131 mar 4 09:56 /dev/bus/usb/002/004
$ grep usb /lib/udev/rules.d/50-udev-default.rules
# 'libusb' device nodes
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp"
$ sudo grep SystemGroup /etc/cups/cupsd.conf
SystemGroup sys root lp
$ groups
lp wheel games video audio optical storage scanner power users
$ cat /etc/modprobe.d/blacklist.conf
blacklist usblp
$ lsmod | grep usblp
(no output)
$ cat /etc/udev/rules.d/10-cups_device_link.rules
KERNEL=="lp[0-9]", SYMLINK+="%k", GROUP="lp"
$ cat /etc/udev/rules.d/10-usbprinter.rules
ATTR{idVendor}=="04e8", ATTR{idProduct}=="326c", MODE:="0660", GROUP:="lp"
$ rc.d status cupsd
:: Checking cupsd status [STARTED]
$ pacman -Q cups ghostscript gsfonts gutenprint foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters splix
cups 1.5.2-1
ghostscript 9.05-1
gsfonts 1.0.7pre44-3
gutenprint 5.2.7-3
foomatic-db 1:4.0.7_20110707-1
foomatic-db-engine 1:4.0.7_20110707-1
foomatic-db-nonfree 1:4.0.7_20110707-1
foomatic-filters 1:4.0.7_20110707-1
splix 2.0.0-11
I open http://localhost:631 in my browser, click "add new printer" and I get just "Serial printer #1"
at "local printers". There isn't my printer. I use KDE, and KDE's tool for adding printers doesn's detect it either.
I miss archlinux, but I need to print.
What may be wrong? What may be I am missing?
Thanks a lot for your comments and help.
Last edited by felihommen (2012-03-04 20:33:39)

Solved!
Restarting cupsd didn't work.
But reinstalling cups...
$ sudo pacman -Rdc cups (it is a dependency of kdeadmin-system-config-printer-kde which I had installed)
$ sudo rm -r /etc/cups/*
I realize cupsd is already running:
$ ps aux | grep cupsd
root 1549 0.0 0.1 75548 4080 ? Ss 21:04 0:00 cupsd -C /etc/cups/cupsd.conf
felipe 1690 0.0 0.0 8416 1028 pts/1 S+ 21:13 0:00 grep cups
I kill it
$ sudo -SIGKILL 1549
$ ps aux | grep cupsd
felipe 1694 0.0 0.0 8416 1024 pts/1 S+ 21:13 0:00 grep cups
Ok. Reinstall cups
$ sudo pacman -S cups
Start cups daemon:
$ sudo rc.d start cupsd
Open firefox. Go to web interface, bla, bla, bla.... And it's there!
I feel really silly. It was a fresh install, so I didn't think about reinstalling.
Printed some jobs and worked perfectly. I used the gutenprint driver.
Thanks a lot, pyther. I thought yours wasn't a very useful suggestion, but it really was. I'm so happy. I owe you.

Disc stuck in disc drive but computer doesn't detect disc

I put it in and it's stuck, and I tried a bunch of methods, but the computer doesn't detect the disc and I can't get it out. Help please!!!!

   If you have not tried any of these steps, try it.
   1. Restart the computer and hold the trackpad down.
   2. Launch iTunes and eject from there.
   3. Launch Terminal.
    Applications > Utilities > Terminal
    Type in   drutil eject internal
   Press enter.

IMac Doesn't Detect Headphones

I have a ~year old 24" iMac (2.8 GHz Core 2 Duo) that I just suddenly started having a problem with. I use headphones pretty regularly and they are almost always plugged into the headphone jack. Recently, I lent my headphones to someone and, when I plugged them back in, the machine doesn't detect them. The audio works just fine coming out of the internal speakers, it's just that it always comes out of the internal speakers, no matter if the headphones are plugged in or not (the headphones also work fine when plugged in somewhere else). I took a look at the Sound Preferences panel and, sure enough, it doesn't detect the headphones as plugged in. Does anyone have any suggestions on troubleshooting?
I'm not sure it matters, but I did just recently upgraded to 10.5.6. The headphones worked after the upgrade, but it may be that this is the first time they were replugged in after the upgrade.

It sounds like the head phone jack has been damaged. If they were connected to a port they weren't meant for, that can happen. And that in turn, can damage your audio output port.
Try disconnecting everything but the keyboard and mouse and reboot the iMac. See if that makes a difference.
Resetting the SMC only provides this kind of support:
-Telling the computer when to turn on, turn off, sleep, wake, idle, and so forth.
-Handling system resets from various commands.
-Controlling the fans. so I doubt it can fix the audio issue.
Check the headphone port really close, make sure there isn't any dust or link or anything that might keep the jack from connecting properly.
Carolyn

Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

Good Morning Denise -
Sorry to hear you are having issues connecting to your Wi-Fi network. I'll include a few more things that you can try to troubleshoot this below. The first thing that I'm wondering is if you cannot connect to your Wi-Fi at home -- are you able to connect to a different Wi-Fi network (at work, a local coffee shop, etc.)? That would be one of the first things to try.
Turning the modem and router in your house of and then on is also a common step as it "reinitializes" everything. Hopefully, one of the steps below will help you with this.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
http://support.apple.com/en-us/HT204051
Restart.
For more help, try restarting your device, router, or cable/DSL modem. After each step, check to see if you fixed the issue.
• Restart your iOS device.
• Unplug your router and plug it back in.
• Unplug your cable or DSL modem and plug it back in.
Still can’t connect?
Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.
Get more help
Try connecting to a Wi-Fi network in a different location. If your device can connect, you’ll need to get help with your Wi-Fi network. If it can’t connect to any Wi-Fi networks, contact Apple.
iOS and OS X: Recommended settings for Wi-Fi routers and access points - Apple Support
http://support.apple.com/en-us/HT202068
All the best,
- Judy

My iMac 20"/Intel C2D 2.4 Doesn't Detect my Sanyo Xacti FH1A.

My iMac 20"/Intel C2D 2.4 Doesn't Detect my *_+Sanyo Xacti FH1A+_* (1920x1080 60p/60i/MPEG-4 AVC/H.264) Camcorder.
I followed exactly my Xacti manual, but nothing happens.
From Mini USB (Xacti Camcoder) to USB (iMac)...nothing!
After connecting the USB, In my Camcoder's screen, it says, *"Hard disk is not Connected."* & *"Disconnect USB converter cable if not using XACTI Library."*
Is this an Apple issue or a Sanyo issue?
Thanks!
Frank S.
SHOCKPROOFX.COM™ ESA
Message was edited by: SHOCKPROOF

Hi, first thing I would do is try connecting the Sanyo to another Mac.
On your Mac try going the SMC route:- http://macosx.com/forums/howto-faqs/302002-reset-system-management-controller-sm c.html
Try another connecting cable - Look on the FAQ (Sanyo Site)->http://sanyo.com/xacti/english/products/vpc_fh1a/index.html..........L
Message was edited by: elmac

Nvidia 195.36.31-1 doesn't detect horizontal refresh rate correctly

Similar Messages

Maybe you are looking for