Nvidia 560 Ti one fan not working properly

I have a 560 Ti card which has worked well for the slightly over 3 years that I've had it, although yesterday when I turned my computer on I noticed a noise coming from my computer which turned out to be one of the fans on the graphics cards. It begins spinning, gets up to the speed of the working fan, then there is a sound like a motor revving and it stops spinning completely. This happens when I'm idling on my desk top and my GPU is about 40 degrees celcius.
If I launch a game and my GPU goes up to 50-70 degrees celcius the sound actually stops. The fan in question begins spinning continuously, but at a lower speed than the other fan on the card.
I figure this is some kind of fan motor malfunction but I'm not positive. I know there's programs that can control the fan speed on a GPU, are there any that can control them separately?

no, you can't control them separately
you have to replace the FANs, both at once
or replace the entire cooler

Similar Messages

Error 90B - Fan not working properly?

Hello, this is my first time here so please excuse me if I posted this in the wrong section.
First, general specs:
HP Pavilion dv6 Notebook PC
Windows 7 Home Premium 64-Bit
BIOS: InsydeH20 Version CCB.03.61.09F.21
Processor: AMD A6-3400M APU w/Radeon HD (4 cpus ~1.4GHz)
6g RAM
(If anything else is needed to help me ask, and I shall post it)
Last week I received an error 90B for my laptop's cooling fan. I was playing Guild Wars 2 and in the middle of playing my laptop shut down suddenly. When I turned it back on it presented the error I'm asking about. The thing is, the system wasn't overheating in the slightest and the fan was working just fine before it shut down. I've tried many fixes proposed on HP's website and from a couple of friends:
-Compressed air blown into the vents
-System restore to a point where the fan worked
-Hard reset
-BIOS update
None of those proposed fixes worked. However, I did find something that fixed it...for about ten minutes. I fiddled with the Catalyst Control Center and set my CPU power back to its default 1400 MHz, and I shut down my system. After I restarted it I miraculously didn't get the 90b error! You could imagine how happy I was. I shut it down one more time to see if the error was truly fixed, but lo and behold it showed up again.
The only change that could have caused the issue was me downloading a program called SpeedFan to monitor my system's temperature (I did NOT (I repeat, DID NOT) change any settings using the program - I purely used it to monitor the temperature.)
I cannot afford to have a repairman replace or look at my laptop as of now, we have bills to pay and food to get, and I absolutely NEED this computer to function. I have work to do, and classes to sign up for, and we have no public computers for miles. Please help me!

Not every fan error is a heat error. There is a sensor that detects a bearing that is wearing out or spinning that is out of round. You can sometimes limp it along for 6 months before the fan absolutely has to be replaced. When it does you will not be able to get past the error.

System fan not working properly

i have a hp 15 notebook 15-r004ne laptop and when i turn it on, it states the fan is not working correctly, then shuts down after 15 seconds or continues to windows if you press enter. I dont know what to do now please i need help .
Answers will be appriciated.
Thank You.

The fan may simply be clogged with dust, pet hair,etc. Pick up a can of compressed air and use it to blow out all vents really well.
If the problem continues try a hard reset.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Cooling Fan Not Working Properly

Hello,
i have an HP Pavilion g7 laptop and when i turn it on, it states the fan is not working correctly, then shuts down after 15 seconds or continues to windows if you press enter. I cleaned all the air vent with compressed air and still get same mesage when i power up. The computer seems to work fine otherwise, but sometimes the fan will run at rather a high speed all night even when it is supposed to be "asleep" with the cover closed. I have to make it hibernate to ensure that it does not run all night like that. Do I need to replace the fan and if so, how?
Thank you!
Rick

Yeah im having the same problem with the same laptop. Im kinda pissed about this because the first month i owned this laptop, that same fan broke and i had to send in into HP to be replaced. So now here we are again with the same part broken.
My friend also bought the same laptop at the same time as me and his fan also broke. So clearly this is a defective part. Not only that but they broke my keyboard during the fan replacement.
So HP are you actually going to do anything about this because i was just on your FB page and repeatedly got ignored by the chick TINA who runs the page or whatever.
So im not too happy at this point, so whats gonna be done about this HP?

Fan not working properly

I have a hp dv6-3060si laptop and when i turn it on, it states the fan is not working correctly, then shuts down after 15 seconds or continues to windows if I press enter. I cleaned all the air vent with compressed air and still get same mesage when i power up. how do i open the unit and check/replace the fan myself?

Here is the Service Manual:
Manual
Also good old Youtube:
https://www.youtube.com/watch?v=suPJX9SKIr8

Laptop cooling fan not working properly

i have a hp g62-457dx laptop and when i turn it on, it states the fan is not working correctly, then shuts down after 15 seconds or continues to windows if you press enter. I cleaned all the air vent with compressed air and still get same mesage when i power up. how do i open the unit and check/replace the fan myself?
This question was solved.
View Solution.

Hello Dragon58,
I understand you’re experiencing overheating issues with your laptop.
Here is the service & maintenance guide for your computer. Go to page 77 and that will give you the instruction on how to get to the fan.
Let me know if you have any questions.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

One fan not working

I have a HP Pavillion 500 Series desktop and in the past few weeks when i power on the screen will show unable to find fan and also shown in a blue little box is boot:F1. Once i hit F1 the computer logs on as normal.

You need to specify the exact model # of this HP 500, or the product code. It's likely the rear case fan (exhaust). If it were the CPU fan (processor/heatsink fan) it would fail to boot.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Help.My HP8660 all-in-one is not working properly.

When I use color scan and copy, the paper came out wiht a lot of vertical colorful lines .But it is working fine if I just copy in black and scan in grayscale.
This question was solved.
View Solution.

Hi,
Try connecting the printer directly to a wall outlet, remove any power strips, extensions, surge protectors, etc..
A such is likely to happen due to power issues.
If that does not help try following these steps:
http://support.hp.com/us-en/document/c04422559/
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

CPU Cooling Fan not working

Hi,
CPU Cooling fan not spinning and showing error on startup saying fan not working properly.MY HP Pavilion G6 laptop's Product number: B0P25PA#ACJ and Serial number: [edited by Moderator]. I want to replace the same. Can anyone tell me which model of fan would be appropriate?
Thnks in advance.
Thanks,
PSantra

Hi @Psantra ,
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the Serial Number in your Post. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Clip inspector in imovie not working properly - when I select a picture - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and in a clip the audio adjustment only shows a speaker? help

Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help

Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
Many thanks.

One of the key on my macbook pro is not working properly, can it be fixed by a cleaning spray or something. there is lot of dust in where I live and thought that might be the culprit. thanks Jason

one of the key on my macbook pro is not working properly, can it be fixed by a cleaning spray or something. there is lot of dust in where I live and thought that might be the culprit. thanks Jason

Don't use any cleaning spray. Wipe with a moist but not wet microfiber cloth.
1. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own"
2.Reset PRAM. http://support.apple.com/kb/PH4405

TS1630 My Iphone 4s reciever is not working properly, when i call someone from my iphone 4s. can any one help me how to solve this problem?

My Iphone 4s reciever is not working properly, when i call someone from my iphone 4s. can any one help me how to solve this problem?

You might like to define "not working properly".

I HAVE IMAC 27 INCH MY MOUSE RIGHT CLICK IS NOT WORKING PROPERLY .ANY ONE HAVE HIS PROBLEM

I HAVE IMAC 27 INCH MY MOUSE RIGHT CLICK IS NOT WORKING PROPERLY .ANY ONE HAVE THIS PROBLEM

Have you tried going to System Preferences>Mouse and making sure that right click is set to secondary click?

HT2693 How do you contact Apple by email to report one of their pre-installed iPad Apps (ie Calender) is not working properly?

How do you contact Apple by email to report one of their pre-installed iPad Apps (ie Calender) is not working properly?
On trying to open month of March 2013 the pre-installed calendar just shuts down and closes. Have tried restarting iPad but this didn't help and because its a pre-installed App am unable to re-install it. Is this a universal problem or just affecting me? Tried searching for support in both App Store and on Apple site and can't see how to report this.

Feedback
http://www.apple.com/feedback

Mouse is not working properly on a one month old HP Pavillion 15-NO28US

I'm sure it's already been talked about on here, but I haven't found a successful fix or the same exact problem as I'm having. I went thru the latest Windows 8.1 update recently (at least I think it was the update) and when I restarted my computer yesterday the mouse was not working properly. Like a lot of other people who are complaining about it, the two-finger scrolling and other similar features are not working, but what really bothers me is the the mouse is almost acting like it was changed to a left handed mouse. I've checked the settings and it is still set on right-handed, but when I click the left mouse button the small window opens up next to where I clicked, which has the copy, delete and paste options (and other regular options) in it. When I click the right mouse button, nothing happens. Double tapping on the touchpad doesn't do anything either. I downloaded and install the latest synaptic drivers and nothing happened. I even performed a system recovery last night to reset all setting and it's still not working. This really sucks because I've only had this computer for about a month and I've already lost everything I've put on it...most importantly all of my school work and music apps. Is there anything to fix this or can anyone tell me what's going on with this stuff, before I have to call into HP and have a melt down?

Hi Kevin3047,
Thank you for your query, I will do my best to assist you!!
I understand that after updating from Windows 8 to 8.1 your mouse is not performing correctly. You have tried the built in troubleshooter but to no avail.
You checked the settings and they appear ok, but when you click the left mouse button the small window opens up next to where you clicked, which has the copy, delete and paste options (and other regular options) in it. When you click the right mouse button, nothing happens. Double tapping on the touchpad doesn't do anything either. I grasp that you did a recovery but it did not help. You also stated you lost your data once, and that in itself is extremely aggravating, I agree.
Here is a step that may help.
Go to the Command Prompt and right click on it to run as Administrator
type sfc /scannow and press enter. This will scan for corrupted files and try to repair them.
Here are links to two documents that may aid with this process.
Troubleshooting Mouse Problems (Windows 8)
Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
Would you also please try a clean boot to see if it persists. Here is a Windows document to assist you.
How to perform a clean boot in Windows
If none of this has alleviated the issue, I suggest you do a Refresh Your PC to Resolve Problems (Windows 8).
If the issue still pesists, I would do a recovery again. You will be prompted during the recovery to backup your personal files to prevent data loss. I would suggest you choose yes, to prevent data loss.
Performing an HP System Recovery (Windows 8)
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
This will take it back to factory. Here is a document on Updating Windows 8 to 8.1 to assist you with doing the update again.
If you are still experiencing the issue, as @visruth stated I would contact HP support for assistance. They are able to remotely log onto your system to help with this difficulty.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
Good Luck!!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Nvidia 560 Ti one fan not working properly

Similar Messages

Maybe you are looking for