NVIDIA 8800gt for Mac Pro (mid 2007 models) not compatible with TIGER !

Just tried to install Tiger on a hard drive while i was successfully able to use the NVIDIA 8800gt in Leopard on another hard drive and the computer would either stall or just have the gray screen come up. Brought it to Tekserve and they said Apple doesn't have firmware for this yet and it won't run on Tiger.. runs flawlessly on Leopard.. anyone have updates on this?

I purchased the 8800 card intending to run it with Tiger. I was assured both by the sales person I spoke with, and the engineer they checked with that it would work under Tiger. I even asked if it came with a driver CD and they said no, but it wasn't needed, it would "just work".
Of course, when I got it and put it in my Mac Pro running 10.4.11, it didn't boot. Then I realized there was a sticker on the box that said it required "10.5.2". I checked the product web page and it did not mention Leopard as a requirement. However, as of Monday April 28th, this was added to the web page. I have a screenshot from two days before which doesn't list it.
Anyway, I've returned the card and will be credited, but I am very disappointed. I can only conclude there was every intention to support tiger (probably with a Tiger Graphics Update 1.0 or some such) but this wasn't ready in time and they hastilty had to slap on the "10.5.2 required" sticker to the boxes.
Hopefully this update will come out at some point, and then I can repurchase the card. (I do not wish to upgrade to Leopard until the finder is fixed.) It would also be nice is there was a 10.4.12 release that supports the new Mac Pro's (hint: you'll get more sales if you do!)
If all else fails maybe ATI will have a new card out in the near future, and hopefully will support Tiger. I think they do a better job on drivers than nvidia anyway.

Similar Messages

  • I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

    I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

    I have had this problem for close to a year. I have an Extreme base station, two Airport Express's and multiple G4 Mac's with up to date software. I have spent a huge amount of time trouble shooting, resetting, reapplying software and finally calling Applecare without any help. It would be great to get this problem solved.
    Powerbook G4   Mac OS X (10.4.7)  

  • I want to go back to Snow Leopard 10.6 from Lion. Quicken 2007 is not compatible with Lion.

    I want to go back to Snow Leopard 10.6 from Lion 10.7.2. Quicken 2007 is not compatible with Lion and I don't like Quicken Essentials 2012.

    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

  • Lion upgrade fails on Mac Mini mid 2007 model

    I have a mid 2007 model Mac Mini, 1.86 dual core model.  When I try to install Lion I get an error failed because a recovery partition could not be created.  I have freed space, with 30 gigabytes free.  I have tried to clone my hard drive using Disk Utilities and an external drive with the thought of booting to the external drive and using it to clone my main drive, to perform a defrag.  That process also fails.  It gets 99% done and with 7 minutes left it fails to clone the main hard drive to the external.
    Can anyone help me from here?

    There is no problem if you take the right precautions, there are plenty of guides on youtube like this one
    http://www.youtube.com/watch?v=rYUjWODQ92I

  • Mac OS 10.5.6 - Not compatible with Firefox? "not supported by architecture" message

    I just had OS updated on a Power Book - following a hard-drive crash, now running 10.5.6 - Tried to download/install Firefox 4 - get a "not compatible with this architecture" message upon launch. Any suggestions?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party build that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

  • Video card suggestions for Mac Pro early 2007 (Rev a)

    Hello,
    I have a Mac Pro Dual Quad Core. I bought it in March of 2007 so it is a certain type of Mac Pro. I think they call it Rev A.
    I want to put in a more up to date video card that is really nice and works with 3d and after effects.
    What are my choices for video cards? Am I limited to certain cards because of the year I bought my Mac Pro? I don't have the money to go up to the really nice $1000 dollar cards but I'd like a real nice ATI card. I think I'm done with Nvidia. They keep burning up.
    Thanks!
    spiral

    Hey Stephan,
    One more question and this will be solved. I'll rep you again of course . I know that nVidia cards cannot do SLI in OS X. I have two and was super disappointed when I bought my first mac (this one) to learn that this option is not available.
    Are ATI cards any different? They have the Crossfire capability and since they seem more supportive of Apple products, I was wondering if they also can support the Crossfire capability.
    Thanks,
    Spiral

  • Using 27in iMac as display for Mac Pro (both latest models)

    I'm in need of using my new 27in iMac (current 2012 model) as the display for my current 2012 Mac Pro. As you probably know, the mac pro has 1 DVI port, 2 mini display port, and some firewire ports. The iMac has 1 firewire port and 2 thunderbolt ports. Both units have USB 2.0 obviously. I found that the new iMac doesn't support target disk mode with non-thunderbolt machines so that won't work. I wonder if there is a way to use these other connections to enable my mac pro to display on the imac. Any suggestions?
    (My latest wonder is if I can upgrade the video card in the mac pro with a card that has thunderbolt outputs?) 

    That is a subtle distinction, but I think you are right.
    Use an iMac with Thunderbolt as a display
    If you have an iMac with Thunderbolt, any other Mac with Thunderbolt can use it as a display. The iMac will play both the video and audio from the other Mac.
    Connect the Thunderbolt cable to the Thunderbolt ports on each computer.
    Make sure both Mac computers are turned on and awake.
    Press Command (⌘)-F2 on the keyboard of the external display Mac.
    If you want the external display Mac to play audio as well as video from the primary Mac, choose Apple menu > System Preferences, click Sound, and then click Output. Select the external display Mac from the list of devices.

  • No audio for Mac Pro (mid-2012) running Win8.1 on Boot Camp

    I've seen discussions around the 'net centered around this difficulty for Macbook users, but users experiencing this with a full-size (desktop) Mac Pro are hard to find. My mid-2012 Mac Pro, (running Yosemite on the Mac side) recently got entangled in the world of Boot Camp when I recently installed Windows 8.1, and I have since been unable to produce audio output from the Line Out. (My headphone output works fine, though it feels like browser audio seems a bit subdued. That's a topic for another discussion, though.) Most of the forum solutions for Macbooks that I've seen involve updating audio drivers, but I can't find any links or recommendations relevant to a mid-2012 Mac Pro. Has anybody else suffered this problem, and managed to conquer? I really don't want to get caught up in ping-pong between Apple's support geeks and Microsoft's nerds.

    Hi, sede my blog, the only solution is on it.
    Write your experience with my driver .
    https://macnavy.wordpress.com/2010/12/02/senza-audio-su-bootcamp-con-windows-7-e cco-la-soluzione/

  • Faulty graphics card for 24inch Imac Mid 2007 model

    I have a faulty graphics card in my 24 inch mid 2007 iMac. I need to get a new one. Can I just ring apple and order one or are they no longer in supply? I have been quoted $600 for repair from my local computer shop to fix.

    this is may not be so useful to you now since the last post is from over a year ago, but.... the GPU not attached to the main logic board, you can replace it as a separate component, but you have to have the tools to open your iMac and reassemble it without allowing any dust or debris in between the glass and LCD panel. I recommend buying a part from ifixit and the tools if you don't already have them. if you're not familiar with iMac internal components, have your local shop do it if you really really want to keep this computer running. consider the cost vs. age of the computer. you may not want to throw money at a machine that apple categorizes as vintage. hope you found a good solution back in 2012, and hope any newcomers to this thread found this helpful

  • Graphics card upgrade options for Mac Pro (early 2008) Model 3.1

    Hi,
    What are my options if I wish to upgrade the stock graphics card? I seem to remember there being one that was about £80 but I can no longer check as the site is only listing the 2009 mac pros now.
    Any assistance would be gratefully received!

    Your current options are:
    ATI 2600
    Nvidia 8800
    Nvidia 5600
    Or third-party ATI 3870 Mac/PC Edition.
    Presumably the new ATI 4870 will work in the Early 2008 MP, but requires OS X 10.5.7 which is not yet released. You can find benchmarks at Bare Feats.

  • Lync for Mac 14.0.10 (141024) not working with latest OS X Yosemite

    Hi -- I am having issues logging in to Lync.
    I recently installed OS X Yosemite 10.10.1 and installed Lync for Mac 14.0.10 (141024) and I have not been able to log in to Lync. When I try to sign in, I get the error message "Sign in to Microsoft Lync failed because the service is not available
    or you may not be connected to the internet." I get this error message even though I am logged in to my company's network/internet.
    Is anyone else having this problem and is there a solution?
    Thanks!

    Yes! I've been wrestling with this problem all day! I've tried manually setting the server names, removing stored credentials, removing keychain entries, and finally clean uninstall/reinstall. No luck.
    This line comes up a lot in my logs.
    12/15/2014|15:02:46.771 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    Here's the majority of the errors from my log, trimmed down to fit into this post.
    12/15/2014|14:58:44.678 185:A0B271D4 ERROR :: RtcGetPlatform(): 10.10
    12/15/2014|14:58:44.678 185:A0B271D4 ERROR ::  Failed to init PANOVideo[79B351F0], 80070002
    12/15/2014|14:58:45.435 185:A0B271D4 ERROR :: No device Id to load PANOVIDEO
    12/15/2014|14:58:45.435 185:A0B271D4 ERROR :: HRESULT failed: 80ee002d = hr . get_AudioSinkDevices
    12/15/2014|14:58:45.435 185:A0B271D4 ERROR :: HRESULT failed: 80ee002d = hr . LoadDevices
    12/15/2014|14:58:45.435 185:A0B271D4 ERROR :: virtual HRESULT CRTCMediaController::LoadDeviceSettings() Failed while loading device- 3 with 80ee002d. 
    12/15/2014|14:58:45.447 185:A0B271D4 ERROR :: HRESULT API failed: 80000008 = hr. ParsePidVid
    12/15/2014|14:58:45.447 185:A0B271D4 ERROR :: HRESULT API failed: 80000008 = hr. ParsePidVid
    12/15/2014|14:58:45.447 185:A0B271D4 ERROR :: HRESULT API failed: 80000008 = hr. ParsePidVid
    12/15/2014|14:58:45.448 185:A0B271D4 ERROR :: HRESULT API failed: 80070005 = hr. Panoramic device registry key couldn't be read
    12/15/2014|14:58:45.448 185:A0B271D4 ERROR :: HRESULT API failed: 80070005 = hr. Panoramic device registry key couldn't be read
    12/15/2014|14:58:45.458 185:A0B271D4 ERROR :: LoadCustomTelephonyDeviceCollection: HRESULT failed: 80070002 = hr. Audio capture
    12/15/2014|14:58:45.458 185:A0B271D4 ERROR :: LoadCustomTelephonyDeviceCollection: HRESULT failed: 80070002 = hr. Audio capture
    12/15/2014|14:58:45.460 185:A0B271D4 ERROR :: HRESULT API failed: 80070005 = hr. Panoramic device registry key couldn't be read
    12/15/2014|14:58:45.461 185:A0B271D4 ERROR :: Unable to register the event source for Lync - make sure event log source reg keys are in place and the resource dll is available
    12/15/2014|14:58:45.461 185:A0B271D4 ERROR :: HRESULT SipStackGlobalInit() - Failed registering the event log source: 2
    12/15/2014|14:58:45.472 185:A0B271D4 ERROR :: HRESULT SIP_STACK::RegisterIPAddrChangeNotification() - WSAIoctl did not return WSAEWOULDBLOCK as expected
    12/15/2014|14:58:45.472 185:A0B271D4 ERROR :: void SIP_STACK::InitPlatformAuthCaps() - EnumerateSecurityPackages failed 0x80000001
    12/15/2014|14:58:45.497 185:A0B271D4 ERROR :: SetTimeoutOptions: "Internet set timeout option: 2. Ignore any error. hr=80070057"
    12/15/2014|14:58:45.497 185:A0B271D4 ERROR :: SetTimeoutOptions: "Internet set timeout option: 6. Ignore any error. hr=80070057"
    12/15/2014|14:58:45.497 185:A0B271D4 ERROR :: SetTimeoutOptions: "Internet set timeout option: 5. Ignore any error. hr=80070057"
    12/15/2014|14:58:45.535 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 1 has 1 credentials"
    12/15/2014|14:58:45.535 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 6 has 1 credentials"
    12/15/2014|14:58:45.768 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|14:58:46.308 185:A0B271D4 ERROR :: HRESULT API failed: 80070005 = hr. Panoramic device registry key couldn't be read
    12/15/2014|14:58:46.309 185:A0B271D4 ERROR :: HRESULT API failed: 80070005 = hr. Panoramic device registry key couldn't be read
    12/15/2014|14:58:46.309 185:A0B271D4 ERROR :: OnActiveAudioDeviceChange: "Error: hr = 80000003"
    12/15/2014|15:00:07.918 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 2 has 1 credentials"
    12/15/2014|15:00:08.008 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:00:08.068 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:00:08.069 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:00:08.071 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:00:08.111 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:OCS:1 from credman: hr=0x80000001"
    12/15/2014|15:00:08.176 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:EWS:1 from credman: hr=0x80000001"
    12/15/2014|15:00:08.183 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.183 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:OCS:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.189 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.189 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:GAL:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.194 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.194 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:DLX:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.199 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.199 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:EWS:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.204 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.204 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUS:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.209 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.209 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUB:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.214 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.214 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ABS:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.219 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.219 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:SPM:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.224 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.225 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:CER:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.229 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.230 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:LOC:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.234 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.235 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:RGS:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.240 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.240 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.245 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.245 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:BDM:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.251 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.251 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:PHO:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.257 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.257 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:proxy:PRX:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.262 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:00:08.262 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:[email protected]:anonymous:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:00:08.262 185:A0B271D4 ERROR :: StartComponent: "Failed to reload credentials from credman: hr=0x80070057"
    12/15/2014|15:00:08.277 185:A0B271D4 ERROR :: Initialize: "Error: returning hr = 80040154 - "
    12/15/2014|15:00:08.448 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:00:08.681 185:A0B271D4 ERROR :: Unable to event log - make sure event log source reg keys are in place and the resource dll is available
    12/15/2014|15:00:08.736 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:00:08.776 185:A0B271D4 ERROR :: HRESULT failed: 80000008 = hr . Wrong format
    12/15/2014|15:00:23.871 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableSubscriptionManager
    12/15/2014|15:00:23.878 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisablePublicationManager
    12/15/2014|15:00:23.878 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableUserSearchManager
    12/15/2014|15:00:23.878 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. failed to disable the endpoint
    12/15/2014|15:00:23.884 185:A0B271D4 ERROR :: DWORD SIP_MSG_PROCESSOR::GetLocalConnectionAddrSubnet() get subnetmask failed
    12/15/2014|15:00:23.956 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:00:23.956 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:00:23.957 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=2, hr=80ee0061"
    12/15/2014|15:00:23.957 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=3, hr=80ee0061"
    12/15/2014|15:00:23.957 185:A0B271D4 ERROR :: ~CManagedCredential: "type=2, domainAndUser=erobr, passwordAvail=1, cert=00000000, userCert=0"
    12/15/2014|15:00:23.957 185:A0B271D4 ERROR :: ~CManagedCredential: "type=6, domainAndUser=, passwordAvail=0, cert=00000000, userCert=0"
    12/15/2014|15:00:23.957 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 6 has 1 credentials"
    12/15/2014|15:00:25.116 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:00:25.126 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:00:26.963 185:A0B271D4 ERROR :: virtual void SIP_MSG_PROCESSOR::OnConnectComplete(HRESULT, BOOL) connect failed 80072743 retry connecting via HTTP tunnel
    12/15/2014|15:00:26.964 185:A0B271D4 ERROR :: virtual void SIP_MSG_PROCESSOR::OnConnectComplete(HRESULT, BOOL) UseHttpProxy failed
    12/15/2014|15:00:26.964 185:A0B271D4 ERROR :: Releasing connection and notifying transactions
    12/15/2014|15:00:26.964 185:A0B271D4 ERROR :: void SIP_MSG_PROCESSOR::NotifyRequestConnectionConnectComplete(HRESULT) - Error: 80072743
    12/15/2014|15:00:28.983 185:A0B271D4 ERROR :: virtual void OUTGOING_TRANSACTION::OnRequestConnectionConnectComplete(HRESULT) - connection failed error 80072743
    12/15/2014|15:00:29.023 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableServManager
    12/15/2014|15:00:29.023 185:A0B271D4 ERROR :: virtual void OUTGOING_TRANSACTION::OnRequestConnectionConnectComplete(HRESULT) - connection failed error 80072743
    12/15/2014|15:02:46.771 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:46.775 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:02:46.775 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:02:46.775 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:47.845 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 2 has 1 credentials"
    12/15/2014|15:02:47.845 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:47.846 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:47.867 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:02:47.867 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:02:47.868 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:47.868 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:47.870 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:OCS:1 from credman: hr=0x80000001"
    12/15/2014|15:02:47.871 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:EWS:1 from credman: hr=0x80000001"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:OCS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:GAL:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:DLX:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:EWS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUB:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ABS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:SPM:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:CER:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:LOC:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:RGS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:BDM:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:PHO:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.876 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:proxy:PRX:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.876 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:47.876 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:[email protected]:anonymous:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:02:47.876 185:A0B271D4 ERROR :: StartComponent: "Failed to reload credentials from credman: hr=0x80070057"
    12/15/2014|15:02:47.876 185:A0B271D4 ERROR :: Initialize: "Error: returning hr = 80040154 - "
    12/15/2014|15:02:47.915 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:47.915 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/1
    12/15/2014|15:02:47.924 185:A0B271D4 ERROR :: Unable to event log - make sure event log source reg keys are in place and the resource dll is available
    12/15/2014|15:02:47.942 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:02:47.942 185:A0B271D4 ERROR :: HRESULT failed: 80000008 = hr . Wrong format
    12/15/2014|15:02:48.237 185:A0B271D4 ERROR :: static HRESULT SIP_MESSAGE::ParseStatusLine(const CHAR*, SIZE_T, SIZE_T*, SIP_MESSAGE*) ParseSipVersion failed 80000008
    12/15/2014|15:02:48.237 185:A0B271D4 ERROR :: ParseStartLine failed hr: 80000008
    12/15/2014|15:02:48.237 185:A0B271D4 ERROR :: static HRESULT SIP_MESSAGE::ParseSipMessageIntoHeadersAndBody(CHAR*, SIZE_T, SIZE_T*, BOOL, SIP_MESSAGE*, bool) ParseStartLine failed
    12/15/2014|15:02:48.238 185:A0B271D4 ERROR :: HRESULT CSIPMessageCollator::ProcessCollatedData() Parsing collated data into a SIP message failed: 0x80000008
    12/15/2014|15:02:48.238 185:A0B271D4 ERROR :: virtual HRESULT CSIPMessageCollator::OnRecv(HRESULT, BYTE*, DWORD) Failed to process the accumulated data.
    12/15/2014|15:02:48.238 185:A0B271D4 ERROR :: virtual HRESULT CSIPClientConnection::OnRecv(HRESULT, BYTE*, DWORD) (80000008) this: 7867D738. Setting CSIPClientConnection state to disconnected
    12/15/2014|15:02:48.238 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) (80000008) this: 7867D738 - Enter
    12/15/2014|15:02:48.238 185:A0B271D4 ERROR :: void SIP_MSG_PROCESSOR::ReleaseRequestConnectionAndNotifyOutgoingTransactions(HRESULT) this: 78AE1408 - Exit
    12/15/2014|15:02:48.243 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) this: 7867D738 - Exit
    12/15/2014|15:02:48.243 185:A0B271D4 ERROR :: virtual HRESULT CSIPClientConnection::OnDisconnect(HRESULT) (80072746) this: 7867D738
    12/15/2014|15:02:48.243 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) (80072746) this: 7867D738 - Enter
    12/15/2014|15:02:48.243 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) this: 7867D738 - Exit
    12/15/2014|15:02:48.244 185:A0B271D4 ERROR :: virtual void OUTGOING_TRANSACTION::OnConnectionError(HRESULT) - error: 80ee0067
    12/15/2014|15:02:50.255 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableServManager
    12/15/2014|15:02:50.289 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:50.289 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:50.289 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:50.289 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[102] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:50.289 185:A0B271D4 ERROR :: OnEnable: "Logon failed with UCCP status/diag code 0x80ee0067/0"
    12/15/2014|15:02:50.290 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:02:50.290 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:02:50.345 185:A0B271D4 ERROR :: SetStatusInfo: "Component LogonSession reports error code 0x80ee0067 (no auto-recovery)"
    12/15/2014|15:02:50.347 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:02:50.347 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:02:50.347 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=2, hr=80ee0061"
    12/15/2014|15:02:50.347 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=3, hr=80ee0061"
    12/15/2014|15:02:50.348 185:A0B271D4 ERROR :: ~CManagedCredential: "type=2, domainAndUser=erobr, passwordAvail=1, cert=00000000, userCert=0"
    12/15/2014|15:02:50.348 185:A0B271D4 ERROR :: ~CManagedCredential: "type=6, domainAndUser=, passwordAvail=0, cert=00000000, userCert=0"
    12/15/2014|15:02:50.348 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 6 has 1 credentials"
    12/15/2014|15:02:50.349 185:A0B271D4 ERROR :: OnEvent: "Component LogonSession failed during state STOPPED: hr=0x80ee0067, diagCode=0"
    12/15/2014|15:02:55.761 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 2 has 1 credentials"
    12/15/2014|15:02:55.761 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:55.761 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:55.782 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:02:55.782 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:02:55.782 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:55.783 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:55.785 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:OCS:1 from credman: hr=0x80000001"
    12/15/2014|15:02:55.786 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:EWS:1 from credman: hr=0x80000001"
    12/15/2014|15:02:55.786 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.786 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:OCS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:GAL:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:DLX:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:EWS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUB:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ABS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:SPM:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:CER:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:LOC:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:RGS:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:BDM:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:PHO:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:proxy:PRX:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.791 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:02:55.791 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:[email protected]:anonymous:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:02:55.791 185:A0B271D4 ERROR :: StartComponent: "Failed to reload credentials from credman: hr=0x80070057"
    12/15/2014|15:02:55.791 185:A0B271D4 ERROR :: Initialize: "Error: returning hr = 80040154 - "
    12/15/2014|15:02:55.804 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:02:55.812 185:A0B271D4 ERROR :: Unable to event log - make sure event log source reg keys are in place and the resource dll is available
    12/15/2014|15:02:55.830 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:02:55.830 185:A0B271D4 ERROR :: HRESULT failed: 80000008 = hr . Wrong format
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: static HRESULT SIP_MESSAGE::ParseStatusLine(const CHAR*, SIZE_T, SIZE_T*, SIP_MESSAGE*) ParseSipVersion failed 80000008
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: ParseStartLine failed hr: 80000008
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: static HRESULT SIP_MESSAGE::ParseSipMessageIntoHeadersAndBody(CHAR*, SIZE_T, SIZE_T*, BOOL, SIP_MESSAGE*, bool) ParseStartLine failed
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: HRESULT CSIPMessageCollator::ProcessCollatedData() Parsing collated data into a SIP message failed: 0x80000008
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: virtual HRESULT CSIPMessageCollator::OnRecv(HRESULT, BYTE*, DWORD) Failed to process the accumulated data.
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: virtual HRESULT CSIPClientConnection::OnRecv(HRESULT, BYTE*, DWORD) (80000008) this: 7C0FBB18. Setting CSIPClientConnection state to disconnected
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) (80000008) this: 7C0FBB18 - Enter
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: void SIP_MSG_PROCESSOR::ReleaseRequestConnectionAndNotifyOutgoingTransactions(HRESULT) this: 7A529008 - Exit
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) this: 7C0FBB18 - Exit
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: virtual HRESULT CSIPClientConnection::OnDisconnect(HRESULT) (80072746) this: 7C0FBB18
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) (80072746) this: 7C0FBB18 - Enter
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) this: 7C0FBB18 - Exit
    12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: virtual void OUTGOING_TRANSACTION::OnConnectionError(HRESULT) - error: 80ee0067
    12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableServManager
    12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[102] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: OnEnable: "Logon failed with UCCP status/diag code 0x80ee0067/0"
    12/15/2014|15:02:58.073 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:02:58.079 185:A0B271D4 ERROR :: SetStatusInfo: "Component LogonSession reports error code 0x80ee0067 (no auto-recovery)"
    12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=2, hr=80ee0061"
    12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=3, hr=80ee0061"
    12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: ~CManagedCredential: "type=2, domainAndUser=DOMAIN_NAME_REMOVED\USER_NAME_REMOVED, passwordAvail=1, cert=00000000, userCert=0"
    12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: ~CManagedCredential: "type=6, domainAndUser=, passwordAvail=0, cert=00000000, userCert=0"
    12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 6 has 1 credentials"
    12/15/2014|15:02:58.082 185:A0B271D4 ERROR :: OnEvent: "Component LogonSession failed during state STOPPED: hr=0x80ee0067, diagCode=0"
    12/15/2014|15:02:59.921 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:03:06.314 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:03:06.314 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:03:06.315 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:03:07.574 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 2 has 1 credentials"
    12/15/2014|15:03:07.574 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:03:07.597 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:03:07.597 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:03:07.597 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:03:07.600 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:OCS:1 from credman: hr=0x80000001"
    12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:EWS:1 from credman: hr=0x80000001"
    12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:OCS:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:GAL:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:DLX:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:EWS:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUS:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUB:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ABS:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:SPM:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:CER:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:LOC:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:RGS:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:BDM:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:PHO:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:proxy:PRX:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
    12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:[email protected]:anonymous:ANO:1 from credman: hr=0x80070057"
    12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: StartComponent: "Failed to reload credentials from credman: hr=0x80070057"
    12/15/2014|15:03:07.606 185:A0B271D4 ERROR :: Initialize: "Error: returning hr = 80040154 - "
    12/15/2014|15:03:07.618 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
    12/15/2014|15:03:07.625 185:A0B271D4 ERROR :: Unable to event log - make sure event log source reg keys are in place and the resource dll is available
    12/15/2014|15:03:07.644 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:03:07.644 185:A0B271D4 ERROR :: HRESULT failed: 80000008 = hr . Wrong format
    12/15/2014|15:08:07.004 185:A0B271D4 ERROR :: virtual void SIP_MSG_PROCESSOR::OnConnectComplete(HRESULT, BOOL) connect failed 80072743 retry connecting via HTTP tunnel
    12/15/2014|15:08:07.004 185:A0B271D4 ERROR :: virtual void SIP_MSG_PROCESSOR::OnConnectComplete(HRESULT, BOOL) UseHttpProxy failed
    12/15/2014|15:08:07.004 185:A0B271D4 ERROR :: Releasing connection and notifying transactions
    12/15/2014|15:08:07.004 185:A0B271D4 ERROR :: void SIP_MSG_PROCESSOR::NotifyRequestConnectionConnectComplete(HRESULT) - Error: 80072743
    12/15/2014|15:08:09.024 185:A0B271D4 ERROR :: virtual void OUTGOING_TRANSACTION::OnRequestConnectionConnectComplete(HRESULT) - connection failed error 80072743
    12/15/2014|15:08:09.025 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableServManager
    12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[102] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
    12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: OnEnable: "Logon failed with UCCP status/diag code 0x80072743/0"
    12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:08:09.032 185:A0B271D4 ERROR :: SetStatusInfo: "Component LogonSession reports error code 0x80072743 (no auto-recovery)"
    12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
    12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
    12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=2, hr=80ee0061"
    12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=3, hr=80ee0061"
    12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: ~CManagedCredential: "type=2, domainAndUser=DOMAIN_NAME_REMOVED\USER_NAME_REMOVED, passwordAvail=1, cert=00000000, userCert=0"
    12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: ~CManagedCredential: "type=6, domainAndUser=, passwordAvail=0, cert=00000000, userCert=0"
    12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 6 has 1 credentials"
    12/15/2014|15:08:09.036 185:A0B271D4 ERROR :: OnEvent: "Component LogonSession failed during state STOPPED: hr=0x80072743, diagCode=0"
    12/15/2014|15:18:06.842 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
    12/15/2014|15:18:06.842 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"

  • Upgraded to CC for LR5...and LR5 not compatible with 10.6??

    I wish I would have known this before I went to the expense (this early).
    I downloaded all of the updates for 10.6, and it is still not high enough, apparently.
    What do I need to do to make my OS compatible with LR5? (or is that even possible??).
    Sorry for my stupid question. I am a relative Mac newbie.

    Thank you....and will that upgrade to Mtn Lion mess anything else up on my Mac? I need to be able to run CS6, also. I'm assuming that since I have to have the Lion for LR5 that the CS6 will be fine? I am reading some HORRIFIC reviews on line.

  • My version of mac 10.4.11 is not compatible with the latest version of firefox so I am trying to find where I can download the previous version 3.6 in English

    Everything was fine until firefox automatically installed the newest version and it wasn't compatible with my version of mac. Normally it just reverts to the version I was using but this time the download of the old version disappeared from my desktop

    Firefox 3.6.24 can be found here:
    http://www.mozilla.com/en-US/firefox/all-older.html
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • My Macbook Pro (mid 2007) will not go to sleep.

    When I close the lid, select sleep from the  menu, or push the power button, and select "sleep" my MBP will not go to sleep as it ussually does.  It has been doing this since I performed the last set of software updates (Mac OS X Lion 10.7.4 (11E53) about a week ago. 
    I need help... this is annoying

    This is for a Mac that won't sleep.
    Here is Apple's  KB article HT1776 with their tips.
    Mine follow;
    USB devices and hubs often cause Macs to not sleep or wake quickly from sleep (notably HP printers and scanners, HP all in ones, and Cannon scanners). Disconnect all USB except for keyboard and mouse and try. If it sleeps, add one back at a time testing after each one to find the culprit.
    If you've set your Mac to receive faxes, it may not be able to sleep. It might also have a damaged preferences file. If you use your Mac for faxing, open System Preferences. click Print & Fax, click the Faxing tab, and uncheck the Receive Faxes On This Computer box.
    If that doesn't work or you've never faxed on your Mac, go to Finder/Hard Drive /Library/Preferences/SystemConfiguration and delete the com.apple.PowerManagement.plist and com..apple.AutoWake.plist files (if your Mac asks, type your admin. password). If the latter file isn't present in the folder, go to user name(probably your name)/Library/Preferences, delete the com.apple.systemuiserver.plist file, and reboot your Mac.
    Some have resolved sleep issue by downloading the Combo update, from this site (yours may be corrupt), not Software Update  disconnect all firewire + USB devices except keyboard + mouse,Repair Permissions, re-install update, Repair Permissions again + try
    USER TIPS……..
    Check in System Preferences > Energy Saver is "Wake for network access" checked? If so, uncheck it.
    One user reported, " I couldn't make my macbook pro to go to sleep because I had my wireless headphone receiver still plugged in. I unplugged it and then it went to sleep."
    Also, if you have an External Western Digital (WD) hard drive and have installed  WDDMService and WDSmartWareD on your Mac, it may not sleep. Fix is to un-install those....you don't need them to use the drive.
    "I have had this problem with my IMac G5. It is surprisingly irritating. LaCie's Silverkeeper backup software was the cause. By default it gave itself permission to wake up the computer to check if a backup was needed. Do you have this or a similar program installed which has scheduled activities including wake-up permissions as an option?"
    One provided this link, xlr8yourmac.com, to a member, which addresses failure of deep sleep with some users that updated and added new FireWire and USB card.
    Also, here is Apple KB article TA2469 about PCI cards and sleep.
    After few days of messing around I found out that I had desktop background (wallpaper) set to change every 1 minute. After unchecking "Change picture..." in system preferences (under Desktop/Screen saver), my powerbook went to sleep all by itself.
    "I  have a Canon printer(shared) and my imac would not sleep. I opened up printer/fax in system prefs and noticed it said the printer was in use when it was off. Opened up the printer queue and noticed about 7 pending documents. Deleted them all and now it sleeps. Check the printer queue!"
    One user has had success, after trying all these tips, using an App. called PleaseSleep. I've never used it though.
    Good Luck! 
    DALE

  • Sd card reader not working for mac pro, sd card reader not working for mac pro

    SD CARD SLOT NOT RECOGNIZING SD CARD?

    SD Cards not reading! Read here!
    I had the same problem with my MBP-R-15". So I took a look inside the SD Card slot and noticed a contact point on the side. For the SD card to be noticed this needs to be pressed in by the SD Card or it cant be read.
    Solution:
    Make sure your SD Card read/write selector switch is up away from contacts. This will ensure it makes contact with the internal MBP contact switch.
    Now slide your SD Card into the MBP SD Slot, and gently push it towards you (if your facing your MBP to type).
    This will allow the SD Card to make contact the internal slot "switch" and it will be recognized.
    It is tricky but easy enouph to deal with.
    Internal switch is sticking over time.

Maybe you are looking for

  • Can Oracle Identity Manager be installed on windows vista operating system

    can Oracle Identity Manager be installed on windows vista operating system?? I get the following error while installing OIM 9.1.0 on Weblogic application server 10.3. userLanguage = en userCountry = US java.io.FileNotFoundException: <Installation Dir

  • MacBook Pro - 13" or 15"?

    I am going to purchase a macbook pro. I will use it for photos/Aperture, iMovie and internet. I was wondering if the 13" would suffice or do I need the 15"? I heard there was a lack of graphics card in the 13" and that I should get the 15", but that

  • HR ABAP FAQs - Part 3 (ans needed)

    Hi, 1. If you want to rerun the payroll for a specific employee what is the procedure 2.  Define processing class, evaluation class & Cumulation classes 3 How you calculate the overtime 4.  how to calculate transport allowance for employees who has w

  • FaceTime only works dialing via e-mail

    Hey, I'm wondering why my iPhone 4 can only facetime via e-mail and not using its mobile phone. I don't even have that option enabled on my iPhone since when I go to facetime's options, it only shows that I can be called via e-mail. At first I though

  • IPad 3 problems

    1- Its not compatible with adobe flash player & hard to find a free compatible app that work same adobe flash player , 2- hard to print from safari or any other program even the emails  unless if I buy a special app to make my wifi printer be complet