Nvidia C2070 in windows 7 ultimate 64 bit, does it work

Hi there
I am getting some new software that has to run on a windows 64 bit platform using the nvidia c2070 graphics card. (The program is compiled to use this card for massive speedups). I can either buy a desktop that runs windows to do this, or buy a mac pro, we would have other uses for the mac pro so I want to figure out if this video card will work on a mac pro, booted as windows7 64 bit.
Does anyone have any advice....or knowledge.

Mac Pro
I dont know that card, and Nvidia Quadro 4000 (maybe compare specs) is the only CUDA GPGPU Apple sells ($750 extra) other than ATI 5870 or 5770 presently. I doubt you can boot with C2070 and its 6GB VRAM into Mac OS.
With a PC you can custom configure to your needs. A Mac much less so. And while you can run MP as Windows only, and for a dual Xeon that isn't all bad, big limitation is in graphics.
You don't have access to the PSU, the PCIe aux power comes from Apple's connector on the logicboard. There are two 6-pin power connectors avalable.One 8-pin means you would need 6-pin to 8-pin adapter too. And $2500 is a lot to invest - sounds like a no to me.
There is a forum for Mac Pro owners that would be more focused.
https://discussions.apple.com/community/desktop_computers/mac_pro?categoryID=194
http://www.apple.com/support/macpro

Similar Messages

Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem m

Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem making the program no longer work properly. The program is closed and there is a notification if a solution is available.

I may have just solved my own problem. Right after posting this I googled bezel lightroom and found this: Flickr: Discussing The word 'bezel' appears in the taskbar. in Adobe Lightroom
I changed the setting in the view menu and now everything appears to be working fine. I cannot explain why it stopped working before because I hadn't made any previous changes to the view options.
Still am curious about the memory usage, though.

Why can I not import pictures any more? Lightroom says "Your Lightroom 5 64-bit does not work correctly"

Why can I not import pictures any more?
Lightroom says "Your Lightroom 5 64-bit does not work correctly"
Technical informations:
PC with Windows 7 64-bit, Lightroom 5.7.1 64-bit installed.
What I have done:
I downloaded the newest LR 5.71 and installed it again - mode repair; without success
I checked my PC with Norton 360: full scanning and optimizing registry
I restarted the PC and than I installed the LR 5.7 again - repair
Trouble 1:
Two days ago I could work with my LR 5 and to import pictures from a SD was no problem. Now I can start LR 5 and I can watch/modify pictures, but as soon as I try to import new pictures LR 5 stops and gives the message "your LR 5 64-bit does not work correctly - searching for solution". I have not changed anything in my computer since lasttime LR 5 worked properly, only the registry was optimized by Norton 360.
Trouble 2:
I live in Switzerland and my language ist German. I dit not find a place where I can present my problem in German, e.g. a phone number oder email-address oder german-chat. My English is to week for a discussion for computer problems and do understand it.
Help:
I would very appreciate if anybody can help me, either to trouble 1 or to trouble 2. Thanks.

Sehen Sie diesen Beitrag:
Photoshop CS4 & Lightroom 2.6 X64 funktionieren nicht mehr
Wacom Tablet-Treiber-Problem?

Vista PDF Preview handler installed on Win 7 32 bit does not work.

There is no discoverable information regarding failure to preview Adobe PDF files on Win 7 32 bit. The advice for 64 bit does not work. Adobe continues to install the Vista preview handler on my Windows 7 computer, which I suspect is the issue. Is there any way to find and install the Windows 7 32 bit handler or is there a registry hack that permits 11 to access the vista version or what? This is a repeat post, as I cannot locate the first and assume that there have been no responses, as I have received no alerts.
If you have an answer I will name my first born for you. He is 41 and object loudly, but no price to great.....

I have fifteen minutes to mark this as a question, despite the fact that no question link or icon exists. Adobe?

I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work

I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work.

Time Machine is one such program, although it is a recursive backup program which offers limited archive capability, based on the capacity of the backup destination, and it requires you set it up before you start editing your files. Some programs are also Versions aware, which offers a kind of restore capability by file. Again needs to be setup before you start editing.
Just a for-your-info:
Mac is not an acronym, it is a nickname for Macintosh.

Windows 2008 R2 does not work on Sunfire X4170

Hi, I recently bought a used X4170 server and have a weird problem. Windows 2008 R2 does not work, but 2012 does. I tried RTM version and a version with SP1. The problem is this:
After installing, I set the password and windows just displays a blank desktop, sometimes it boots but freezes soon after - the mouse cursor moved but nothing else works.
Booting in Safe Mode works and Windows do not freeze. The Event Log contains lots and lots (about 20 per second) of these entries:
Log Name:
System
Source:
Microsoft-Windows-WHEA-Logger
Date:
6/21/2014 12:24:59 AM
Event ID:
17
Task Category: None
Level:
Warning
Keywords:
User:
LOCAL SERVICE
Computer:
WIN-SOGS2TPM334
Description:
A corrected hardware error has occurred.
Component: PCI Express Root Port
Error Source: Advanced Error Reporting (PCI Express)
Bus:Device:Function: 0x0:0x0:0x0
Vendor ID:Device ID: 0x8086:0x3406
Class Code: 0x30000
I have tried updating the driver for this device (downloaded from Intel), no difference. Is there a way to make Windows 2008 R2 work on this server?

Hello
Thank you for the update.
Please refer the below Knowledge document related to this issue:
Windows BSOD WHEA_UNCORRECTABLE_ERROR(124) & correctable WHEA events when disabling network ports on X4170M2/X4270M2 (Doc ID 1576683.1)
However above document talks about X4170M2, I would suggest you to follow and if issue persist, please open Service Request with Oracle to diagnose further.
Best Regards
Bhavyesh

I have triple pointers on PSE7 & Windows 8. Windows 7 solution does not work

I have triple pointers on PSE7 & Windows 8. Windows 7 solution does not work-can't find how to change DPI

Right click on your Desktop and select Screen Resolution
Then in the screen that comes up, click on Make Text or Other Items Larger or Smaller
Then move the slider under Change the Size of All Items to Smaller and restart windows 8

HT5634 The "automatic Install" in the windows support software does not work. I cannot see the USB in Windows to manually start set uo

The "automatic Install" in the windows support software does not work. I cannot see the USB in Windows to manually start set up.
I have downloaded windows support software from Apple 3 time with the same result. Where can I get a clean copy of the Windows support software?

Did you correctly format your usb stick in accordance with the Boot Camp installation instructions? Go here to the Boot Camp System Requirements page, http://support.apple.com/kb/HT5634, look for your computer model/year and download the correct version of Windows Support software.

Lenovo OneKey Recovery for Windows 7 64bit does not work

Does anyone have a patch or new release link for Lenovo OneKey Recovery? I recently bought a G450 and Win 7 Ultimate-64bit separately, there is no link available in the support and download page under this model yet. I tried installing the Vista 64 bit version and still does not work as well. I did a clean install downloaded the drivers from the Lenovo support page.
Solved!
Go to Solution.

You haven't provided a link to the page you are trying to download from. On top and at the right of most download pages there should be a red loud speaker next to the print page button, just click on it in order to report a faulty download or possible other problems with the page.
Is the following page the page you were trying to download from? If so you can submit direct feedback if the download doesn't work for you.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS009179
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Shortcut for downloads window in Safari does not work

Hi everybody,
My shortcut for downloads window in Safari (command-option-L) does not work anymore, when i press that combination of buttons, iTunes appears in my screen.
Can i do something to bring back my shortcut?
Santiago

Ok...
Try troubleshooting the Safari .plist file.
Quit Safari.
Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Now launch Safari. Try the keyboard shortcut for the Downloads window. If it didn't help, just move that .plist file back to the Preferences folder.
Also, go to your Safari menu bar click Safari/Reset Safari. Select the top 7 buttons, click Reset. Restart your Mac. That might help too.

Win 7 pro 64 bit does not work nice with tv tuners

my win 7 pro 64 bit will not work with three recommened tv tuners, though not specific to 64 bit . I know one works great withmy old 32 bit xp system. all three different recommended tuners crashed my system three times amd informed me the flash player that comes in the software is not compatable with my system. also flash player stand along in my system will not work right all the time. worked so well in my old system? any thoughts on this dilemma. really do not want to return my new diamond tv wonder hd 750 card. otherwise this system blazes very appy with it, thanks.

This forum is for Firefox support, you should try the customer support for the manufacturers of the TV tuner cards.

ITunes 10.1.1 for Windows (64-bit) Does Not Run After Installation

I recently upgraded my laptop to Windows 7 and downloaded the 64-bit installer (iTunes64Setup). Although I recieve the notice that it was installed, when I start it up, I receive the "iTunes Library.itl cannot be read..." error message whenever I try to start it.
I have uninstalled the program, deleted the original setup file (iTunes64Setup), downloaded it again and re-installed it twice with no success.
Is there something I am doing wrong? Any assistance is greatly appreciated.
Thanks,
John

Finally got it installed and running.

Itunes 64-bit on Windows & 64-bit does nothing but give errors!

I've been trying to connect Iphone 3g 4.0.1 on Windows7 64-bit since last 5 days! Tried almost all the tips found on internet regarding this issue and none worked! At first simply downloaded the latest iTunes 9 (64-bit). It didnt work at all and I ended up seeing different errors. Then read this;
http://www.sevenforums.com/installation-setup/4318-release-notes-important-issue s-beta-release-windows-7-a.html
Tried that too and still getting nothing but errors. In last 5 days I encountered the following variety of errors;
Device Manager -> Portable Device -> MTP Usb Devie -> Device cannot start (Code 10)
Device Manager -> Portable Device -> Apple Iphone -> Device cannot start (Code 10)
iTunes -> iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)
iTunes -> iTunes could not connect to the iPhone "iPhone" because an unknown error occurred (0xE8000023)
iTunes -> iTunes could not connect to the iPhone "iPhone" because an unknown error occurred (0xE8000035)
iTunes -> iTunes could not connect to the iPhone because an invalid response was received from the device (0xE8000001)
I even tried programs like iPhone Explorer, DiscAid, iFun-box etc. None worked. And now looking for a final answer. Will it work on Windows 7 or not? I am too tired of trying now.

I don't know if this will help, but folks on Windows systems (typically laptops) with PM55 chipsets (like their brethen with P55 chipsets and other chipsets in the 5 series and 3400 series) have been reporting a lot of trouble with iPod/iPhone syncing (in particular, 0xE0000065 error messages, but the symptoms may vary).
In cases where no BIOS updates are available, and the BIOS does not have a user configurable C-STATE setting, some success has been achieved by using an old trick ... changing the power management settings on the USB Host controllers, as per the following document:
http://support.apple.com/kb/TS1401
When attempting to connect iPhone or iPod touch, you may see one or more of the following error messages:
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE800000a)
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE800006b)
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE8000001)
Alternatively, the error may be the same as above but end with a different number. See:
http://support.apple.com/kb/TS3221
(thanks to B Noir for the tip)
Hope this helps.

ITunes download using Firefox on Windows 7 64-bit does not work

I just got set up on a new Windows 7 machine (64-bit) at work. I was trying to download the iTunes exe file to my machine and was initially using Firefox as my browser. After multiple attempts to save the file were unsuccessful, I decided to try a different browser.
I popped over to Chrome and it downloaded with no problem. I thought I would share in case anyone else runs into the same issue.

This has worked for some of us but not all. Go to control panel and uninstall itunes and icloud, restart pc, go to apple site and download itunes and icloud. Good luck.

Itunes installation under windows 7 64 bit does not work

I have several versions of iTune downloaded. During installation no errors. After the installation i can't find Itunes in all programs.
Also in the map programm files there is no Itunes.
I need to put my contacts on my new iphone 4.
thanks

This has worked for some of us but not all. Go to control panel and uninstall itunes and icloud, restart pc, go to apple site and download itunes and icloud. Good luck.

Nvidia C2070 in windows 7 ultimate 64 bit, does it work

Similar Messages

Maybe you are looking for