Nvidia Card not being shown in Device Manager

So I recently installed Windows 8.1 and fully updated. But no matter how many times I uninstall "Microsoft Basic Display Adapter", the Windows isn't detecting my card to install the appropriate driver.
Back in the day when I first installed windows 8, the card was detected and it automatically installed Nvidia drivers from Windows update but not this time.
Anyone know how can I get the card to show up in the device manager?

Sorry I forgot to mention.
Qosmio F 50 -126
Graphic Card : Nvidia 9700m GTS.
Right now I'm running on Microsoft Basic Display Adapter from 2006.
This is very frustrating.

Similar Messages

Graphics Card Does Not Show Up In Device Manager (Re: Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

Hp pavillion dv9502au notebook pc broadcom wireless adpater not shown in device manager

Problem: hp pavillion dv9502au notebook pc broadcom wireless adpater not shown in device manager
System Type
hp pavillion dv9502au notebook pc
Windows editon
Windows 7 Ultimate
System
Processor       AMD Turion(tm) 64 X2 Moblie Technology TL-56 1.80GHz
Installed Memory   1.00 GB (895 MB usable)
System type              32-bit Operating System
Wirless TECH
Broadcom Wireless
Problem
1. I have a switch at front left of laptop which can be slided to switch on Wireless Connections
2. IT turns red when switched off and blue when switched on as normal
3. But only thing that turns up is Bluetooth connection and no broadcom wireless connection
4. No adapter is shown in the devmgmt.msc( device manager)
5. I tried installing broadcom drivers to reslove the problem, and restarted many times for install.
6. I tried the "reset thing" after removing the battery that experts said about.
7. I was atlast forced to use Wired conneciton using ethernet( i hate it because, i can't be mobile around the house)
8. Please Help
Windows 7 Ultimate
System
Processor       AMD Turion(tm) 64 X2 Moblie Technology TL-56 1.80GHz
Installed Memory   1.00 GB (895 MB usable)
System type       32-bit Operating System
Wirless TECH
Broadcom Wireless
Problem
1. I have a switch at front left of laptop which can be slided to switch on Wireless Connections
2. IT turns red when switched off and blue when switched on as normal
3. But only thing that turns up is Bluetooth connection and no broadcom wireless connection
4. No adapter is shown in the devmgmt.msc( device manager) (network adpaters shown are
                                     NVIDIA geforce adapter, bluetooth adpaters)
5. I tried installing many broadcom drivers to reslove the problem, and restarted many times for install.
6. I tried the "reset thing" after removing the battery that experts said about.
7. I was atlast forced to use Wired conneciton using ethernet( i hate it because, i can't be mobile around the house)
Please help

Your wireless adapter is defective.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Satellite Pro A10 - No wireless adapter not shown in device manager

Can you Help - Toshiba Satellite Pro A10
Model No PSA15E-01PFQ-EN
Serial No Y3602494G
Windows XP Pro
On the front of this laptop is a switch for wireless - this switch is set to On, Windows XP Pro cannot find any wireless device - Windows Device Manager does not show any wireless adater. Can you advice please - do I need to install Driver - Does this laptop support a wireless conection?
Many Thanks
Owen

Hi
Usually if you have a wireless switch your notebook should have a wireless LAN card too. In your case I would try installing the driver. Then the WLAn card should be displayed in device manager properly:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
If this doesnt work you can try a BIOS update.
Are you running factory settings or have you installed your own Windows version?

W520 Smart Card reader does not show up in Device Manager

W520 Smart Card reader does not show up in Device Manager.
It was working before and now nothing. Nothing happens when SD card plugges in.
Could my smart card reader stop working or is this a configuration issue?
Any thoughts?
thanks
Ian

Hi Ian,
Welcome to the community, and thanks for the post.
The issue is related with software, to resolve this you need to re-install the card reader driver from the below mentioned web link.
http://support.lenovo.com/en_SG/downloads/default.page?
After that check if the issue get resolved.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Ipod Touch (GEN 2) is not being seen under devices in my Itunes

My Ipod Touch (GEN 2) is not being recognized under devices in my Itunes. My computer is recognizing it as a device under device manager, but it is not showing up under devices in my Itunes. I am also getting this error message saying "Itunes Could Not Connect to this Iphone because an unknown error occurred (0xE8000065)", and the weird thing about it is that i do not have an iphone but an ipod touch. I have followed the steps on the support website and they have not helped. Iam out of ideas and i really need some help. Please Help!!

I would start here:
http://support.apple.com/kb/TS1495
(iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows)

New Leave Request not being shown in UWL

Hi ,
I have an issue in which when manager tries to approve a leave request from UWL ,in the Pop up i,e in Request Waiting for approval" table the latest requests are shown but the same request are not being shown in the UWL.
I checked in SWI5 for the user and whatever leave requests are shown in popup are there for the user but the same is not updated in UWL.The user has refreshed the UWL but still it didnt show the new leave requests
I dont want to reregister the webflowconnector in UWL configuration as we generally use reregister to register a new task in the UWL .
Can someone please help me in resolving the issue.
Thanks,
Satish Kumar

Hi Siddharth,
Thanks for your reply.
DYNPARAM parameter value as suggested in the note 1140959 is already maintained against the tasks TS12300097 ,TS12300116.
we have done Refresh from the UWL iview but still its not showing the latest Leave Requests but it is coming in the popup window when one of the existing leave requests in UWL is selected.
Thanks,
Satish Kumar

PDF Export Options not being Shown

Need to export to pdf again. Last export was for only 6 pages, as a test. Now want to export the entire document. However, only 6 pages are created in the export. No options to revise the pages, are presented.
The iD app is acting strangely, in that many other options are not being shown. Also, on loading a document, there are notes about hyphenation and missing LILO. Beginning to believe I need to reinstall.
Pleae advise best course of action at this point.

before you reinstall, see if trashing the prefs helps. See Replace Your Preferences

When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
 Cheers, Tom

In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown

In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown :
How to display the tabs in shared views also.
I just wanted to created one shared view that will look like Inbox but filter data for State = 'Completed'

Please update me if you can find any way to achieve this in BPM workspace

Non-Admin not being shown update button on XP

Non-Admin users on XP are not being shown the option to trigger an update.
The mozilla update service is installed but as normal users aren't able to start the update process it never gets as far as starting it.
When a new update is available a link to the download page is shown in the About box rather than a button to start the update.

That is good. It would be better if that were the case with a standard account on Mac OS. I can no longer trust that button because it will start downloading an update if there is one, even though I disabled Firefox updates completely.

Planned Order for a Product not being shown

Hi Experts!!
I am an ABAPer and I am new to SAP APO. We are now working on /SAPAPO/PPT1. When clicked on some quantity, all the planned orders existing for that product are being shown with respective quantities. Now, I am trying to create a new planned order for a product through FM BAPI_MOSRVAPS_SAVEMULTI3 by splitting the quantity among the receipts. I have gone through several posts and have written the logic. But the newly created planned order is not being shown in /SAPAPO/PPT1. I can't find it anywhere. Am I doing something wrong here?
Here I explain it with an example. I have an aggregated entry for the month of June with quantity 3000, which is already split under receipts 1234 and 1235 as 1000 and 2000 EA respectively. Now, I need to split it as 1000 EA for each planned order and hence am creating a new plord. I am using same FM for changing plords as well with quantities as 1000. So, now both the receipts are being shown with quantity 1000 and the aggregated value as 2000... and the newly created one is missing. But I need the new one to be displayed and the aggregated should be 3000. Why is this happening? Am I missing something?
I already have posted a query that is related to this total requirement. Change Receipt Quantity for Planned Order in LiveCache . This has the first part of the total requirement. Just provided for extra info, but not related to this issue however.
Please help me out. Your help is highly appreciated. Thanks a lot!!

Hi Srinivas,
With prior experience, i am sure that the BAPI SAVEMULTI3 can be used for Creation & Change.
I dont think,the FM's which you are using, are recommended by SAP. So , try to use BAPI most of the time,as it ensure data consistency.
As you told, order is not flown to ECC, but visible in APO, i would suggest you to check the importing parameters of the bapi, like EVENT CONTROL ( should be '1' ).
and COMMIT_CONTROL(should be 'E').
Also, check your queues after execution of bapi. you should find your change pointer in the inbound queue of R/3 System. Do let me know if you still stuck.
Thanks,
Santosh KB.

TS1468 Not being shown in recently release album

I recently submitted one album. This is not being shown in recently release album. What we need to do my album to be displayed in iTunes when user selects recently released albums.

Hi Bhakti,
The operation 01 is create, this means the mapping records are stuck in a create operation, i.e. something stopped the original mapping records creation and left an inconsistency in the catalog mapping tables.
I would suggest the following:
De-assign the mapping for the affected categories in the catalog authoring tool, once de-assigned, also execute the 'Map Content' selection and save/exit.
Then run report /CCM/CLEANUP_MAPPING in test mode to check for orphaned items or invalid mapping entries. If inconsistencies are found in test mode, run this again with the test flag removed.
Finally - re-map the categories again and perform content mapping. The items should then exist in the procurement catalog.

How do I resolve the issue of a 2nd generation iPod touch not being shown on iTunes 11.4?

2nd generation iPod not being shown on iTunes 11.4
How do I resolve this issue? I have tried reinstalling after uninstalling it, nothing has worked for me any advice?

Well, go ahead and try every port, make sure to clean out the port with a q-tip, to make sure no dust is blocking the ports.
Then enter DFU, if iTunes doesnt recoginze it when your in DFU, that means you charging input is damadged.
Hope this help

Sent E-mails not being shown

Hi, I have a MBA and since yesterday all the e-mails that I have sent are not being shown in the sent folder. I sent one to myself and I got it so it must be working but how can I see them again after I sent them? Oh and the other problem is that search function does not work the way it used to. When I typed in one word it would show me all e-mails that had that word in them including the ones from e-mail adresses with which had the word in the adress.
Does anyone know how to get this to work?
That would be great! Thanks!
P.S.: English is not my native language, sorry for mistakes

Hi McGrey24,
A couple of important questions to get us on the right track.
1.) What type of email account are you using? Who's the service provider?
2.) What are you using to search? The Spotlight feature inside mail or the OS-wide Spotlight search?
The Mail search requires a little tweaking, by default it doesn't give you access to your entire account just specific mailboxes. There are ways to control if you want to search all mailboxes or if you're looking for the text string as the subject (or just content).

Nvidia Card not being shown in Device Manager

Similar Messages

Maybe you are looking for