NVIDIA card not showing up, VGA adapter reports problem

Hi all,
I am running a W520 which has a NVIDIA Quadro 1000M, but I have an issue with installing the NVIDIA properly.
In device manager, only the Intel HD Graphics family and Standard VGA Graphics adapter show up. The VGA Graphics adapter reports a "problem (10)".
Link to picture
When I try to install the latest driver from NVIDIA, I get an error message, stating: "You must install an Intel driver first."
Link to picture
The NVIDIA control panel states:
Does anyone have the same issue? In general, my computer runs fine. I would like to use the NVIDIA only for the CUDA cores, not to hook up another display.
I hope this will work finally without opening a can of worms.
Thanks!
Frank
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

Hi, Frank
Under the properties of the device as shown in your first picture, have you tried updating the driver by looking under the Driver tab? If so, try updating the driver and see if that helps.
I also found this document from Microsoft that may assist you in solving this error.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Similar Messages

  • Excel is not showing multiple Drill thru report selection option

    We have created 3 drill thru reports in EIS, excel is not showing Select Drill-Through Report Dialog Box when tying to acess drill thru reports. It defaultly executes the first drill thru report, we want it to list the available reports so that we can select accordingly after view/launch is selected.
    essbase 7.1.6 version SQl server 2000

    Hi,
    This Prompt message would have been set in WAD(XHTML Coding section) in your old project. Now , you cross check your Web template for the same. Your issue will be resolved.
    Regards,
    Suman

  • Designed Reports are not showing in the Analysis Report List

    Hello Master's,
    I have designed one report as per our client requirement, and assigned also, but its not showing in the analysis reports list.May i know what setting needs be done to appear in the reports list?.
    How to create and add the characteristics(New Fields) in the reports, here we can able to create and add the key figures.
    Kindly update the solutions with steps.
    For you reference please find the below screen shot.
    Thanks in Advance......!
    Kind Regards
    Shankarappa H L

    Hi Shankarappa,
    The Analysis -> Reports shows a list of views. Hence, once you create a report you need to complete two mandatory steps.
    1. Create a View
    2. Assign Report
    For more information, please refer to the following link: In conversation with Sebastine Augustine, product manager redefining Business Analysis that forms an integral part of th…
    Thanks,
    Sebastine

  • SD Card not showing after Mountain Lion Update

    This matter has been discussed for some time now in
    Apple Support Communities > Desktop Computers > iMac (Intel) > Discussions
    SD Card not showing after Mountain lion Update
    Since the update to Mountain Lion, the SD slot does not show up in Finder.
    Someone gave a fix using the killall in Terminal, and that worked only once.  I have not been able to get that fix to work again.
    The only saving grace for me is that my SD Card us is always from my Nikon camera, and Nikon ViewNX 2 software is able to see and read from the card.
    Killall may have worked partially in that I no longer get the error message telling me that I have removed the SD card improperly, and need to dismount it first.
    However, Finder still cannot see it.

    BrianForbesColgate wrote:
    Thanks, Barney ...
    Those are basics ... Been there, done that, first.
    Then you should hava posted all the troubleshooting you already accomplished.
    Does the card show up in System Information? Or is that another one of the "basics" you've already looked into?
    Does it show up in Disk Utility? If so, have you tried formatting it there to determine if it is a formatting problem?

  • Nvidia Card not being shown in Device Manager

    So I recently installed Windows 8.1 and fully updated. But no matter how many times I uninstall "Microsoft Basic Display Adapter", the Windows isn't detecting my card to install the appropriate driver.
    Back in the day when I first installed windows 8, the card was detected and it automatically installed Nvidia drivers from Windows update but not this time.
    Anyone know how can I get the card to show up in the device manager?

    Sorry I forgot to mention.
    Qosmio F 50 -126
    Graphic Card : Nvidia 9700m GTS.
    Right now I'm running on Microsoft Basic Display Adapter from 2006.
    This is very frustrating.

  • MacBook Pro with Draft n card - not showing n

    I just got a Dell 1500 draft n card for my CoreDuo MacBook Pro. I installed it and the n enabler utility, but it is still not showing up as n compatible in Network Utility.
    I have installed the AirPort Base Station Updater, repaired permissions, rebooted, installed the n enabler again, etc. But still no joy.
    Any ideas?
    Phil

    Are you sure the enabler ran? Early reports said that the enabler would not run on a Macbook CoreDuo. However it worked fine for me for the when I installed the "n" card for the Macpro in my Macbook CoreDuo.
    Check out the following
    http://xlr8yourmac.com/systems/macbookprowireless_N_upgrade/macbookpro_N_cardinstall.html#storytop
    Others say you need to use Pacifist to extract and run the enabler on a CoreDuo (again check the article). Also I have read somewhere that you can edit the installer to change a parameter value so that it will run on a core duo (I tried to find it but couldn't).
    Don't give up - I have a great increase in range and speed. I was able to replace an old Airport extreme and 2 airport expreeses with a single new airport extreme.
    Good luck.
    Powerbook G4 12, Macbook Pro 15" 2 Ghz, iMac G5,20,BT, 250GB, 1GB RAM,   Mac OS X (10.4.8)  

  • Blackmagic Decklink card not showing up in Playback settings

    Just upgraded to Premiere Pro CC - my Blackmagic Decklink card is not showing up in the Playback settings box.

    Hi Peter - thanks for responding - yes I did install the latest drivers - but finally found a thread that solved the issue.  Turns out Blackmagic installs the drivers in its own Adobe folder - but Adobe only wants to see them in its own special folder (Application Support>Common>Adobe).  Once I moved everything from the one folder to the other, then Premiere could see the card just fine.  They should be definitely look at a better way of dealing with this - so it doesn't become an emergency science project for people like me.
    Anyway, case closed - for now.  Thanks.

  • Sender File Adapter Not Showing in Decentral Adapter Engine

    Hi,
    We have recently implemented a Decentral Adapter Engine on a windows box. The adapter engine seems to be working fine because my adapters show and seem to work fine in it.
    However, when I define a Sender File Adapter that uses File Content Conversion message protocol instead of just File messaeg protocol, the adapter does not show up in the decentral adapter engine.
    I made sure that Adapter Engine parameter in the Sender File Adapter shows the new adapter engine but that does not seem to be working. If change the Adapter Enginer parameter to show the Central Adapter Engine, then I can see the Sender File Adapter on the Central Adapter engine and it works fine. (Note: The Central Adapter Engine is installed on a Unix box) 
    Here are the paramters I defined for the Sender File Adapter:
    - Transport Protocol: File System (NFS)
    - Message Protocol: File Content Conversion
    - Adapter Engine: (new Adapter Name)
    Source Directory: (
    server/drive/path)
    File Name: purchaseOrder.txt
    Quality of Service: Exactly Once
    Poll Interval (secs): 60000
    Poll Interval (msecs):
    Retry Interval (secs):
    Processing Mode: Archive
    Add Time Stamp (checked)
    Archive Direcotry: (
    server/drive/path/archive)
    Process Read-Only files: (not checked)
    Processing Sequence: By Name
    Fiel Type: Text
    File Encoding:
    Operating System Command:
    Additional Files (not checked)
    Content Conversion Parameters
    Document Name: MT_Request_File_Data
    Document Namespace: http://nxy.tots/fg_admin
    Document Offset:
    RecordSet Name: Purchasing
    RecordSet Namespace:
    RecordSet Structure: Purchase_Record,*
    RecordSet Sequence: Ascending
    RecordSets per Message: 1
    Key Field Name:
    Key Field Type: String(Case-Insensitive)
    Purchase_Record.fieldFixedLengths: 8,4,2,10,10,12,18,12
    Purchase_Record.fieldFixedType: char
    Purchase_Record.fieldNames: Request_Action,Request_PO_Num,Request_PO_LN,Request_PO_Date,Request_Purchasing_Org,Request_Purchasing_GName,Request_Created_By,Request_Vendor_Name
    Purchase_Record.fileContentFormatting: trim
    Adapter Status: Active
    Advanced Mode: (not checked)
    Your help is much appreciated.

    Hi Alaa,
    look into this document:
    http://service.sap.com/nw-howtoguides -> Exchange Infrastructure -> Troubleshooting: Adapter Engine 3.0 (Expert Call slides)
    If the File Adapter works without conversion, then you should count the number of fields in a row. If it differs from the configuration, then it runs on error.
    Another idea is to check the content type of the file. When you do not enter a File Encoding, then the file adapter assumes utf-8. If the file is for example latin-1, then the number of characters in a row are not counted correctly.
    Regards
    Stefan

  • Planned values of profit centers not showing up in customised report painte

    Hi,
    I made a customised profit center report via report painter.  I have already uploaded planned values in KP06.  In the customised report painter, the record type is "1" (plan) and version is "0" for actual/plan.  The columns for the planned values do not show any figures.  But when I generate std SAP report S_ALR_87013340 - Profit Center Group: Plan/Actual/Variance, it shows the plan values.  In that way, I know that the cost center upload is correct.   
    Please advise on how to show the plan values on the report painter.
    Thanks and best regards,
    Thess

    Hi,
    ahhh...the fact that you can see the actual values has made me realize what the problem might be. GLPCP and GLPCA (actual line items) use different fields in regard to the period. I assume that you are utilizing the POPER characteristic to select the periods....correct?
    In that case please try the following: copy library 8A3 into the customer name space (I would always base customized reports on your own library). In your copy activate the RPMAX characteristic. The re-create your report based on the new library and make the following changes: use RPMAX in the general selection and only use POPER in the column definition for the actual values. That should work.
    Regards
    Karl
    P.S....hope you bear in mind that such a report is a potential performance nightmare.

  • HD video from SD Card not showing up in Iphoto or Imovie

    When I put my SD card in, Iphoto comes up and has my pictures but not my HD video.  I tried to import in Imovie and then went under my SD card file and the video still is not showing.  The video is 100% on the SD card. They showed up when I imported my pictures and videos using windows on my mini toshiba. I want to edit the video on Imovie though..  Why wont they show? 

    As AussieDJ suggested - have your copied the files from the SD card to your hard drive? You should be able to open them in QuickTime or, at least, VLC DVD Player. I get from your message that you just want to watch the movies and not edit them?
    First, copy the movies onto your hard drive. Open QuickTime player and try to watch them there. If that fails, try downloading VLC DVD Player, open it and then try to view your movies.
    Good luck,
    Clinton

  • Open PO not showing up on purchasing reports

    We have a customer whos PO's are not showing up on our purchasing reports. I am thinking it has something to do with needing to run some type of process to maybe sync up addresses or something. Anyone have an idea!
    Thanks in advance.

    Hi,
    There are various reports in Purchasing, can you please let us know the name of the report which you are trying to run?
    Thanks,
    Raghav

  • SD or CF cards not showing up in Finder

    Hello all.  I edit with FCP and always have created images of my SD and CF cards. When ready to edit I mount and import. I have noticed lately that I do not see the image of the card once mounted in finder.  I see it in my desktop and disk utility but not in finder. I can mount anything else like a program and shows up find in finder. I went ahead and used my reader and put in an SD card. Same thing. I used another reader, same thing as well.  Any suggestions on how I can get the card to show up in finder?  Thanks

    On the General Tab I do have external disks checked and in Sidebar, the card does not show up.  I did check the overall computername and within I see the card, but does not show up on sidebar.

  • BP Balance not showing correctly in Aging report

    Good Day all B1 experts,
    We are converting to SAP B1 for fiscal year 2010 and earlier today I have found a problem with BP balance on the AR side.  Below is a summary of the problem:
    Problem:
    - For some BP, after I entered opening balances,  their total outstanding AR balance was not reflected in the Aging report, nor can be found in the Opening Balance window (under System Initialization).
    - However, A/R control General Ledger account is correct and ties to my Year End 2009 Financial Statements
    Attempted Solution:
    - I reentered the "missing" opening balance for those BP accounts.  After entering the numbers, however, the Aging report shows a DOUBLED amount of the correct balance.  And when I go check the Opening Balance window,  the system is showing the correct BP balance (NOT Doubled).
    - Now my A/R control General Ledger and Opening Balance General Ledger Account is out of balance as well.  The difference equals to the amount I reentered.
    Has anyone encountered similar problem before?  I cannot think of anything I did  to cause such mess.  In any case, I am wondering if I need to use the Restore BP function.
    Please provide me some guidance on this.  Thanks!!!
    BR,
    Sunny

    Good Morning Kerstin,
    Thank you for the article.  The version that we are using is 2007A (8.00.180) SP:00  PL:45
    In the article, it mentioned about the Single Reconciliation Engine.  Do you know if that tool comes along with previous upgrades, or we will have to download and install it?
    Actually it seems for one of those problem BP accounts, the correct balance is reflecting on the Aging Report after an invoice was issued yesterday.  However, its BP balance is still not correctly reflecting elsewhere (such as Incoming Payment under banking module.)
    Regards,
    Sunny

  • Not showing last value in report

    Hello,
    I am having a report with new selection and i want the last value in result area and for this i have selected 'Calculated result as Last Value' in properties but it is showing me the summation of all value.so could you please tell me how do i get the value for this.I am using BW3.X.
    Thanks & regards,
    Anoop Chaturvedi

    Hi Anoop,
      You need to keep setting as calculate result as ' Last value' or exception aggregation to last value.
    As you are in production, to check whether it is working or not in production, run the report in RSRT, go the key figure right click and go to enhanced menu, and then in propeties, and then in kf properties you can settings like calculate result as , no of decimal places, sorting(these options which you design in Query designer), make it as last value under calculate result as and transfer the selection.
    This should work and then you make the change in dev and transport.
    Regards
    vamsi

  • Mac book pro Retina is not working with vga adapter to video projector

    I want to connet to video projectors, With vga adapter i can't connect to the video projector and also my mouse will not work properly, it becomes very slow and I can't work it. With dvi adapter combined with vga, the mouse is fine, but I can't connect to the video projector. Mirroring is my setting. I have tried several video projectors. What shall I do?

    Adjust the volume control located in the lower left corner of the YouTube Video Player.

Maybe you are looking for