NVIDIA CONTROL PANEL APPLICATION HAS STOPPED WORKING

I have got a big problem here with NVIDIA cards and have not been luck at all. My problem started when I had a clean install of Vista 32 on my HP XW6600 which came with Windows XP installed with an option to upgrade to Vista. When I upgraded I also upgraded my GPU from GT 9500 to Quadro FX1700. When I tried to open the control panel all I got was an error message saying it has stopped working. I never had this problem in XP with the 9500GT.
I later sold the quadro and purchased the Geforce GTX260 and had a clean install of Vista 64 on my system. But still this nvidia control panel cannot be opened. I am a professional video editor and needs the advantage of two monitors when running Adobe Premiere PRO CS4. I have seen some forums which says uninstall all nvidia drivers, use CC cleaner or Drivesweeper, in safe mode and reload the Nvidia drivers once again. but all this have failed.
My patience is running out now and I am now considering switching to ATI cards. I wanted to take full advantage of cuda with nvidia and was looking foward to purchase a quadro 5600 for maximum added perfomance. I have just ordered a second monitor from DABS.COM which I intend to hook up with my system and without accessing the Nvidia control Panel I will be in trouble.
Am I missing something here. PLEASE tell me know if you have got an idea on how to resolve this. I have attached a screenshot of the error message I get.
System
HP XW6600 Vista 64
Quad Xeon 5420 2.5ghz
250 GB C drive
750 GB D drive
1.5  TB Raid 1
GTX 260
4GB RAM
ADOBE CS4 Production Premium

"It has to be that HP thing"
Bill what is this HP thing. Could you expand on that please because I have just completed a clean install using HP RESTORE plus disc and my drive was completely wiped out. Not even Windows OLD files were left.
I then installed the drivers using the Original CD that came with the GPU, still the problem remains. I updated the driver using the internet and it didn't help neither. I have also purchased an Intensity PRO editing card and expecting a 22" HD monitor thhis morning for HD editing.
I think ATI is the way forwad. Which is the best ATI card for HD editing. Budget maximum GBP£150.
YOUR HELP WILL BE GREATLY APPRECIATED.

Similar Messages

  • During Palm reinstallation, when reboots get errors, "The application failed to initialize properly (0xc0000142)" and "DeviceMonitor MFC Application has stopped working."

    I'm trying to reinstall the Palm software because synchronization has been failing for the past two months.  It get to the point of synchronizing the calendar and fails with the message that there are too many events.  Hence, nothing in the process after that synchronizes.  I've tried reinstalling the Palm s/w to no avail.  Now I'm trying to uninstall and reinstall the Palm s/w only to be greeted with another error message when the system restarts (as part of the installation process).  The error is, "The application failed to initialize properly (0xc0000142).  Click OK to terminate the application."  When I choose OK, I get the error, "DeviceMonitor MFC Application has stopped working."  Windows does not notify me of a solution.  Any ideas/solutions would be greatly appreciated!
    Thanks,
    Gina
    Post relates to: Tungsten E2

    Hello and thank you for using the Palm Help Forums!
    You may need to do a clean uninstall of the Palm desktop software to resolve your issue.
    Uninstall Palm Desktop by going to your Control Panel > Add/ Remove Programs > Remove Palm and/ or PalmOne 
    Delete the following folders:
    C:\Palm
    C:\Program Files\Palm
    C:\Program Files\PalmOne
    C:\Program Files\Handspring 
    From the Windows start menu, select Run.
    Type Regedit and click Run or OK
    *NOTE* BE VERY CAREFUL IN YOUR REGISTRY KEY EDITOR. IF THE WRONG THING IS DELETED THIS CAN CAUSE SERIOUS DAMAGE TO YOUR COMPUTER'S OPERATING SYSTEM. 
    Delete the following keys: 
    HKEY_Current_User\Software\PalmDesktopAutorun
    HKEY_Current_User\Software\Palm
    HKEY_Current_User\Software\Palmone
    HKEY_Current_User\Software\U.S Robotics-- (check and make sure only palm related keys are under this one)
    Delete this key as well:
    HKEY_Local_Machine\Software\PalmSource
    Close the Registry window
    Restart PC upgrade to new palm desktop (by going to www.palm.com).
    Post relates to: Treo 800w (Sprint)
    Post relates to: Treo 800w (Sprint)

  • Nokia Launch Application has stopped working...

    Hi,
    I've just carried out a fresh install of Vista 32-bit and installed Nokia PC Suite (version 6.85.12.0) and I now get the following error after a few seconds, even if I'm not trying to run any of the apps:
    Nokia Launch Application has stopped working
    A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    The version I had before the re-installation worked perfectly.
    Is it possible to find that version again?
    Thanks,

    I would try to manually (through control panel I mean, no registry hacking) uninstall 6.84, connectivity solution and USB driver, then boot PC and then install 6.85 on a clear computer, if this problem, repair 6.85 through control panel and then decide whether to go back to 6.84

  • Satellite L500D-144 - CCC Host Application has stopped working

    Ladies and Gentlemen,
    my PSLT6E-007004GR is almost a year old.
    Earlier this month there was an update - possibly from Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
    Catalyst Control Center. Host Application has stopped working, it is searched for a solution.
    A new installation of the graphics card driver and Catalyst Control Center did not change. Instead, a standard graphics card driver from Microsoft is installed.
    Resetting the system to the month of October also brought nothing, for after fresh updates, the problem occurs again.
    So it is reproducible.
    Have already reported more customers or am I the first?
    What can you do to the problem?
    Sincerely,
    CBluebaerchen

    Hello
    > Resetting the system to the month of October also brought nothing, for after fresh updates, the problem occurs again.
    Do you get this display driver update from Windows Update?
    If yes restore the system to an earlier point and disable this display driver update and choose only the important updates from Windows. Thats enough.
    Otherwise you could try to run CCleaner. It can clean and fix registry problems.

  • NVIDIA Control Panel application 1.5.30.49

    Good evening guys. I a6255.it Pavilion Desktop PC with windows vista home premium 32bit. Please let me know where can I download the NVIDIA Control Panel Application 1.5.30.49 drivers for my PC. Thank you for your interest

    Hello alba,
    I understand you are looking for NVIDIA Control Panel Application 1.5.30.49. I would suggest you take a look at the NVidia Support Site as I believe if anything this application is included in a Softpaq and I have been unable to locate one that it may be in. You will proabably getting a clearer answer from NVidia.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Satellite L300- 1AQ - Bluetooth tray application has stopped working

    When i put my laptop on it comes up with an error which says:
    *bluetooth tray application has stopped working*
    A problem caused the problem to stop working correctly.
    Windows will close the program and notify you if a solution is available.
    Anyone got a solution?
    The laptop is a Satellite L300- 1AQ
    Only had it a month!!
    Please help, thankyou
    xx

    Hi
    Did you try to reinstall the Toshiba BT stack?
    Usually this should help to get rid of this error message.
    Here you can download the newest BT stack:
    http://aps2.toshiba-tro.de/bluetooth/
    Remove firstly the old BT software from the system and after new reboot install the BT downloaded from the Toshiba BT page.
    Bye

  • Print driver host for 32 bit applications has stopped working

    I just bought a Hp ENVY 7640 printer. I cannot use the wireless printing on my 64 bit computer,  with Windows 7.  I get an error message "print driver host for 32 bit applications has stopped working".  I have looked into all of your online support solutions and nothing I have tried has fixed the problem. 

    Was there any resolution to this issue?  We have a user with the same issue.  The details of the error are:
    Problem signature:
      Problem Event Name:                        APPCRASH
      Application Name:                             splwow64.exe
      Application Version:                           6.1.7601.17777
      Application Timestamp:                     4f35fbfe
      Fault Module Name:                          mxdwdrv.dll
      Fault Module Version:                        0.3.7601.17514
      Fault Module Timestamp:                  4ce7c883
      Exception Code:                                  c0000005
      Exception Offset:                                000000000004e891
      OS Version:                                          6.1.7601.2.1.0.18.10
      Locale ID:                                             1033
      Additional Information 1:                  0f86
      Additional Information 2:                  0f86ddcc0aa605af31ef1b7f5abedf57
      Additional Information 3:                  539e
      Additional Information 4:                  539e0f43d86d39f144fdb012e341ed8d

  • Cannot use BD DVD Player: WIN DVD MFC application has stopped working

    Tried to install my old version of WinDVD and failed and in the process may have accidentally deleted a file,
    for now whenever I try and use BD DVD Player I get the following message:
    'WIN DVD MFC application has stopped working '
    I tried using restore point but still get it, can anyone advise please?

    It will be interesting to know which notebook model do you have.
    Anyway, in my opinion there is some software conflict. I can imagine both players use same modules or plug-ins and there is conflict.
    I dont know what solution can be but maybe you should remove both players, restart your notebook and make clean BD player in hope it will works properly.

  • Hpqwa_ui mfc application has stopped working

    Error message HPQWA_UI MFC application has stopped working. My wireless won't connect to this laptop but connects fine to other devices in the house. I tried a system restore but it said it could not do this properly. I tried resetting router, no change. I tried Norton scan and eraser but it says it cannot fix internet connection. I am a novice so of any one has any ideas they would be appreciated. Thanks   

    It will be interesting to know which notebook model do you have.
    Anyway, in my opinion there is some software conflict. I can imagine both players use same modules or plug-ins and there is conflict.
    I dont know what solution can be but maybe you should remove both players, restart your notebook and make clean BD player in hope it will works properly.

  • APPLICATION HAS STOPPED WORKING

    Our team has developed a composite WPF application, MVVM architecture, targeting Framework 4.0, VS2012, VB.NET. We are using the Prism library. I have created an InstallShield Limited Edition Setup and Deployment Project for Windows install.
    For test I’ve limited the install to target a Win7 64 OS. I have all the prerequisites covered. The application works perfectly in development and when launched by double-clicking the .exe in the bin folder. The setup installs the app in the programs directory
    without error.
     When the application is launched from the Start menu, the Window is displayed and after about 5 seconds I get the familiar ‘STOPPED WORKING’ dialog. Tried on development machine and VMware setup. Same result.
    I’ve analyzed the memory dump and the dump created by ProcDump with the WinDbg tool and I’ve learned the issue is in the KERNALBASE!RaiseException procedure. Here is the full result:
    0:000> .ecxrrax=000000007fa1c169 rbx=000000000012b2e8 rcx=000000000012ab80
    rdx=0000000000000118 rsi=0000000000000001 rdi=0000000000000005
    rip=000007fefda5940d rsp=000000000012b190 rbp=0000000003036568
     r8=0000000000000000 
    r9=0000000000000000 r10=0000000000000000
    r11=000000000012b1d0 r12=0000000000004000 r13=0000000002874ce0
    r14=00000000e0434352 r15=0000000002874a98
    iopl=0   
         nv up ei pl nz na po nc
    cs=0033 
    ss=002b  ds=002b  es=002b 
    fs=0053  gs=002b            
    efl=00000206
    KERNELBASE!RaiseException+0x3d:
    000007fe`fda5940d 4881c4c8000000 
    add     rsp,0C8h
    Verbose mode ON.
    There is plenty of chatter on KERNALBASE but nothing seems applicable here. Are there any ideas?

    Hi ChuckMM,
    It seems that it is not the correct forum for this issue.
    I might not have the correct detailed answer you need, but I might lead you into the right direction to solve your problem.
    To make sure that whether it is the setup file issue, since it is related to the InstallShield, you could post this issue to this forum:
    http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
    In addition, since you debug the dump file with WinDbg tool, if you really want to analyze it, you could post this issue to the windows debugger forum:
    https://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?forum=windbg
    Have a nice weekend,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • THE click on feature to sign on log out of certain applications has stopped working for me

    my arrow for clicking on LOGON LOG OFF and sign in and sign out isnt working on certain appliciations this just started with my last Foxfire Update Please HELP

    That problem is caused by the Yahoo! Toolbar that extents too much downwards and covers the top part of the browser window and thus makes links in that part of the screen not clickable.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Error "print driver host for 32bit applications has stopped working"

    Got this error when trying to "print" a gmail message to a pdf file. After some research (trial and error) I found that in my case this message is due to the subject line of the message generating an invalid Windows file name. Using the subject line to generate the filename is how GMail decides to generate the file name. I guess this is as good a strategy as any. I cannot think of a better strategy for GMail (would not want that "feature" changed).
    Solution: Forwarded message to myself with a subject line that does not generate an invalid Windows file name and then "printed" that forwarded message.
    Software: Adobe Acrobat Pro. OS: Win 7 64-bit. Application: Chrome accessing GMail. But I conjecture that this error message is not dependent on the specific configuration I have. For example, I recall having a failure when trying to do "print" a GMail message under 32-bit vista though I do not recall the error message (was very likely different :-). In that case I copied the message into Word and moved on leaving it as a mystery.
    Adobe solution (I suppose) is that Acrobat (distiller) needs to check the validity of the Windows file name and give back a rationale error message before passing to the OS.
    Hope this helps somone out there.

    I am having the exact same problem. I have Windows 7 Pro 64-bit and Design Premium CS 5.5.  InDesign is the ONLY program that will not print to any printer. I get the "Printer selection failed." error every time I select any printer, even the Adobe PDF one. I have a Brother printer, an HP Plotter, and even an Oce copier/printer.  InDesign gives the error no matter what printer is selected form its own list.  Photoshop and Acrobat do not give me any issues, nor does any of the MS Office programs nor Autodesk softwares.  It's only InDesign that fails.  Reparing doesn't do anything and reinstalling every printer driver is pointless because it's only InDesign that produces the error.
    Does anyone know what to do to fix this?

  • Envy recline pc27 k119 - no option to adjust contrast/brightness on NVIDIA control panel

    cannot adjust brightness/contast settings.  NVIDIA Control panel only has 3D settings under navigation tree - cannot find video option.

    Hello msolit,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues trying to adjust the brightness on your HP device. I would be happy to assist you, but first I would encourage you to post your product number for your computer as I was not able to locate suitable information using (Envy recline pc27 k119). I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • HOST APP SERVICE has stopped working

    I keep getting the message "HOST APP SERVER has stopped working" whenever I try to select the home button on my screen. It simply says that Windows will close the application and notify me when a solution has been found, but this has been going
    on for a week and it has yet to message me a solution. The error message isn't very specific as to what is going on and I have no idea what to do!

    Hi kgabriella,
    Please open Event Viewer and check the related logs, if possible, post the information here.
    Further, follow the advice posted by Arnav Sharma, follow the guide to boot into clean boot and check the issue again.
    Besides, see if the thread below would help:
    Catalyst control centre host has stopped working.
    Best regards
    Michael Shao
    TechNet Community Support

  • I get a "Palm desktop by access applicatio​n has stopped working" message when switching to the Month calendar view.

    I have a Z22 and am running Access version 6.2.2 on a PC with Vista.
    When I move from Day, Week or Year to Monthly view in the Calendar, I get the "Palm Desktop by Access Application has stopped working" (and then the Windows message saying they are checking for a solution, which they never seem to find).
    Does any one know 1) how to fix this and 2) what is the cause ?  Am I running old software which I need to update ?
    Thanks.
    Post relates to: Palm Z22

    Thank you, aeisha_anis for the steps to correct this problem.  I verified that I must have corrupted calendar data as the PALM Desktop does come up and work when I follow your first 4 steps and remove the data from it.  I can't, however, get through the importing step at the end of your instructions.  I've tried a few times and am afraid I may have messed up the data file as it now is only showing a datebook. mdb and a datebook.bak file under the DateBook folder I copied to my desktop, but no datebook.dab folder as it was showing before and I never did find the datebook.dat file you mentioned.  I still have all of my current calendar data on my Palm Centro but I can't get it to sync with the Palm Desktop without getting the "Palm Desktop by ACCESS Application has stopped working" message.  Do you have any ideas on how to fix this problem?  Thanks much!

Maybe you are looking for