NVIDIA display driver on Satellite 2450-201

i have downloaded and installed the latest nvidia display driver for my laptop which has nvidia gforce 420 go and the driver i installed was the v 36.48 when i boot up the displays are bad and we=hen i log on it says nview load error no nvidia hardware detected on the primary monitor if you are running on nvidia card please make sure it is configured to be primary. what shall i do when i access the nevidia desktop manger in control pannel and check the box the message comes up again then i restart and the graphics are fine but after about 5 boot ups it goes back to the rubish graphocs and message appears again.
what shall i do!

Hi
Did you install the driver from the Toshiba page??
If not so visit the Toshiba driver page and download the right driver.
Its not recommended to use NOT Toshiba graphic card drivers.
Then I would recommend checking the display properties if the notebook screen was set as the primary monitor. Mark the display with the number 1 and check it the option Use this device as the primary monitor was enabled.
Furthermore check in the Advanced option in the nView tab if the nView mode was set to standard and that the option Make this the primary display was enabled for the notebook screen.

Similar Messages

  • Satellite 2450-201: nVidia display driver

    i have just downloaded the latest nvidia display driver for satellite 2450-201 from toshiba and now the display has gone worse the driver is 3.6.4.8. for nvidia gforce 420 go what shall i do i have tried rolling back it wont let me! and i dont have a sytem restore point either is there some settings in nvidia help!

    Hi
    Usually the original Toshiba driver should works properly and without any errors.
    In you case I would recommend starting the OS in the safe mode and then to enter the device manager.
    There you can select the Display adapters area and there you can uninstall the graphic driver.
    Then download the right driver from the Toshiba page and install it again!!!

  • Satellite P105 - Can't install nVidia display driver

    I tried completing the download multiple times for the nVidia Display Driver 9.7.5.4.
    The first times the setup would not complete citing "that this computer does not have the correct hardware.." , then the Windows message came up and said that "if this setup did not complete successfully click here blabla" and I did that.
    Now when I run the setup it still stops in the same spot. But now it says that *"the setup can not be completed because this driver only runs on Windows Vista, and this is not Windows Vista." But the thing is I do have Windows Vista!*
    Current Display Driver: Mobile Intel(R) 945 GM Express ChipSet Family
    Laptop Model: Satellite P105-S6177
    Operating System: Windows Vista 32-bit

    Hi
    > Current Display Driver: Mobile Intel(R) 945 GM Express ChipSet Family
    And then you want to install an nVidia display driver?
    LOL :D
    I think you can not install an nVidia display driver because your notebook is equipped with a Intel chipset and graphic card.
    You will never be able install nVidia display driver and so did get the message that you don’t have the correct hardware.
    Intel graphic cards and nVidia graphic cards are different things so do not mix it!
    Some P105 was equipped with nVidia cards and otheres with Intel card and it seems that you have an Intel card.

  • Satellite 2450-201: USB Controller only 1.1 instead of 2.0

    I have formated the hard drive on my Satellite 2450-201 and loaded Widows XP SP2. I loaded all the drivers from the utilities disk and everything is working fine except the USB ports are only running at 1.1 instead of 2. There is a yellow exclamation mark in device manager on USB controller. I have searched for a driver from Toshiba downloads but there is nothing available.
    Can anyone suggest a soloution to this problem.
    John

    Hi John
    As far as I know there is no driver for USB controller. When you install chipset driver all USB ports should be recognized properly. Exclamation Mark in device manager is an indication that the device is not configured correctly. Try to remove the controller and restart the unit. After that check the status in device manager again.
    Is some external device connected to the unit by USB ports?

  • New display driver for Satellite L755D needed

    Hi
    when is the next set of drivers coming out for ati display driver?
    Satellite L755D - 12e A6-3400M APU with HD6520G

    Unfortuately on this user-to-user forum nobody can answer your question.
    From time to time check toshiba download page to see if new driver will be available.
    Good luck

  • With hardware acceleration enabled, and with plenty of tabs open, using the Windows 7 taskbar preview option will almost always crashed the nVidia display driver.

    Latest Firefox 4 beta 6.
    nVidia GT240 1GB DDR3 with driver version 258.96.
    Windows 7 Ultimate.
    If I have plenty of tabs opened, in Firefox 4 beta 6 with hardware acceleration enabled, using the Windows 7 Taskbar preview feature (that will show all the tabs Firefox has loaded) will cause the Nvidia display driver to crash. When this happen, the GUI part of Firefox will be unusable and has to be killed via Task Manager.
    This doesn't happen if hardware acceleration is disabled.

    It is beta software and the older 4.0 b6 version may not work with all display drivers.
    You can trey the test extension: http://jagriffin.wordpress.com/2010/08/30/introducting-grafx-bot/

  • V570 Nvidia display driver problem

    Hi,
    I just bought a laptop Lenovo V570 with the serial nr.: 59-3157502y. When i try to instal the nvidia display driver i get the message: "This graphics driver could not find compatible graphics hardware".
    Please give a solution how to fix this problem. I had high expectations for this product....
    Tks

    In the drop down list you're picking Geforce 500 series, you should be picking Geforce 500M series (notebook)

  • Satellite 2450-201: Cannot format 4GB card in SD card slot

    Hello,
    I´m a Satellite 2450-201 owner and I have a big problem.
    I just bought a 4GB SD memory card and nice, it fits on the side slot on my notebook.
    It's the first time using the memory card, so a needs-to-format window appears when I try to access.
    The Window has the right information : 3.78Gb, Fat32, ...
    I Click "OK" and the Windows (XP SP2) informs : cannot complete format (here is portuguese, so it's translated to english)
    If the right size is informed , 3.78Gb, why the Windows cannot format ?
    My notebook is spyware and virus free (just 23 tasks running and under control), I Have SP2, Bios 1.50 (newer), My SD controller drivers is up-to-date (the last and the only one was released in 2003).
    Also tried third party "Panasonic SDFormatter 2.0". It's reporting the unit (hardware) or the mem stick SD is not compatible with the program. And the same effect happens : the Sd unit lost the nice icon and I need to remove/insert the SD to see the same story again.
    Help me please, friends.

    Hi
    Its very strange that youre possible to see the SD card after plug-in. some people has suggested that this SD card slot supports only 256MB, 512MB cards and additionally with no MMC support.
    I dont know if you have Toshiba SD card format utility installed on the laptop but on many Tosh notebooks such utility is preinstalled and could be used for the card formatting.
    According to some posting in this forum the format utility of Portg M400 could handle the 2GB SD cards but not sure about 4GB.
    If possible you could try to install this utility on your notebook but you know you have not big chances that this will work.
    I think in such case only a external SD card reader will help you.

  • Where can i find display driver for satellite A200 PCAECE Windows XP 32-bit

    Where can i find display driver for satellite A200 PCAECE Windows XP 32-bit? Help!!!!

    hi there,
    Most of the A200 series makes use of this video card chipset.
    [Intel(R) Graphics Media Accelerator Drive X3100|http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1670 732xml&sliceId=&dialogID=57594450&stateId=1%200%20 57598302]
    Hope this will help :)

  • Lenovo b560 can't install nvidia display driver

    hello i've learned that lenovo b560 computers got 2 graphic cards one is intel hd graphics other is nvidia 310m but i can't install the nvidia driver it always gives the no compatible drivers found error :/

    hi Frost1,
    Welcome to the Forums.
    The B560 with Intel+Nvidia graphics uses the Nvidia Optimus Technology to switch between the Intel GPU (for power saving) and the Nvidia GPU (for applications that requires more processing power).
    If you have Windows 7, try the following:
    1. Restart the machine and hit F8. On the menu, select "Disable driver signature enforcement".
       - Sample image
    2. Install these drivers then reboot:
    1st:   Intel Onboard Graphics Driver for Windows 7 (64-bit)
    2nd:  NVIDIA Display Driver for Windows 7 (64-bit)
    If you still get the error, can you PM me your serial number or indicate your machine type (e.g., 0679-3JU) to check the PC specs.
    Regards

  • Nvidia display driver has stopped responding and has recovered

    Hello,
    I'm fairly new to the boards.  I recently purchased my first laptop, the t510.  I have noticed on 2 occasions, about a month apart where the screen flickered and received the nvidia display driver message above.  On the first occasion, I was running Google Earth.  On the second occasion, I was playing a demo of a game.  The power settings were on low in both instances.  Is the problem that the video card was not receiving enough power or am I looking at imminent hardware failure.  I have the 3 year depot warranty so I can certainly send it in for repair if necessary but I wanted to make sure it wasn't just a power setting.  Any information you could provide would be much appreciated. 
    Regards,
    Chad

    Look at this thread:
    http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T510-Nvidia-Display-stopped-and-recovered/m...
    You are not the only one with this problem scout929.
    Its not the best idea to do a direct comparison with the W510 thread, since that model doesnt use the same graphic processor as the T510 - but its a guideline to the driver being faulty nevertheless. So I guess we just have to wait for a driver that works better...

  • NVidia Display Driver Service - with Radeon / Intem GMA T500?

    The T500 has switchable Radeon / Intel integrated graphics.
    On the T500, Services lists:
    nVidia Display Driver Service  
    -  Provides system and desktop level support to the NVIDIA display driver
    Does the T500 use this Service for anything?

    Kay! Took me forever, but I bloody found it ~ !
    If you guys are having the same issues, use the following drivers:
    http://forums.laptopvideo2go.com/topic/26984-toshiba-qosmio-triple-hybrid-sli/
    Working great with those, make sure you follow his guide ~

  • NVIDIA Display Driver Version 2.9.4.2

    Windows Update for Windows 2000 is listing NVIDIA Display Driver Version 2.9.4.2 under Drivers.
    Does anyone know about this version? I am not having any problems with the Nvidia drivers that I downloaded and installed so I have not installed this update.

    It is the version that comes with windows and will automatically install if you have a card listed within the reference file.
    I usually have to chase it down and delete all the references to that version as XP will continually load that driver without any intervention from the user.
    Very frustrating

  • Re: Satellite A500-1EN - Nvidia display driver stopped responding

    I often have problems with my notebook about the nvida controller. Sometimes it appears the next message on the task bar down right: Display driver NVIDIA Windows Kernel Mode Driver, Version187.98 stopped responding and has successfully recovered
    I installed the new drivers from nvida web, (Version187.98 to197.16), but the problem doesn't go.
    Anyone could help me, please?
    Notebook: Toshiba Satellite A500-1EN
    Operating System: Windows 7 64bit
    CPU: i5 CPU M430 2.27GHz,
    GPU: nvidia GeForce GT 330M,
    DirectX Version:11.0
    RAM: 4GV
    Screen resolution: 12766x788
    HD: 500GB, free 300GB

    > {quote:title=xactxx wrote:}{quote}
    > I have the same problem, or rather had the same problem, because I think it's fixed now. :)
    >
    > Thanks to whoever posted to remove the default theme.
    >
    > Right-click on an empty space in your Desktop, and choose Personalize. Then choose the 'Windows 7 Basic' theme instead of one of the pre-installed themes from Toshiba.
    >
    > That did it for me. No more random NVIDIA crashes! (so far).
    >
    > I think that's why most Toshiba laptops have this problem, because their Windows 7 comes pre-installed with one of their themes, and it somehow conflicts with the NVIDIA card. I don't know why this happens, and why changing the theme fixes it.
    What a load of rubbish changing a theme just does that changes your theme I did this the day I brought mine still the drivers crash and re-start. huh.

  • Satellite Pro A100-080: NVidia display driver crashing during 3D Games

    Hello,
    i have some problems with the display driver since i've bought the notebook 9 month ago. I've tried to install every new driver published on the toshiba homepage but no driver is running stable on my system.
    The problem is that my notebook is crashing with bluescreen during playing 3d games and my windows vista tells me its the display driver causing the crashes.
    I had the previous version of the driver installed several month ago and i feel it was more stable than the current version. But unfortunately i've lost the files for that one, but i would prefer any functional driver for this notebook.
    My Notebook
    Satellite Pro A100-080
    Modelno. PSAASE-00G004GR
    Manufactured on 2007-02-20
    Thank you all in advance for yr assistance
    bgrds
    Robert

    Hi,
    below you will find a small list of games i've tried on my system.
    Supreme Commander
    Halflife 2 (including several mods)
    World in Conflict Demo
    Warhammer - Mark of Chaos
    Warhammer - Dawn of War
    X3
    I've also tried to play the older games on compatibility mode, but this doesnt run. At least one of those games should run properly on my system, but none is running.

Maybe you are looking for

  • How would I delete multiple nodes at a time in OSB

    I want to delete multiple nodes in OSB at a time. I have a request and that needs to get rid of the Nodes instead of using multiple delete actions I want to achieve in one shot. Any suggestions

  • Serial number in sales order creation

    HI all,      please help to me........ My requirement a add the serial number BAPI sales order. problem is their no serial number in bapi structure.             How to add serial number crate a salesorder bapi. serial number is RIPW0-SERNR. Thanks &

  • Make adobe form -read only after Submit button

    Hi, I have an Interactive form withuser input fields. I am submitting it via E-mail.How do I make it read only after I click Submit ? I am using javscript for sending e-mail. rgds vara

  • How to get process instance activity information

    We have the following need: The process instance will be created either manually or by integration from another system. It is not possible to have two instances running for the same process, so we want to check if there is already one instance runnin

  • IBook G4  LCD screen broken

    The LCD screen of my iBook G4 was smashed in an accident. The laptop works fine but the screen is broken. What is the best option for replacing the screen? Is there any option in India? Harisakhee iBook G4 12.1''