Nvidia driver 320.49 not work with premiere cs5

I updated my nvidia driver to 320.49, so premiere cc can detect and work with cuda. But premiere cs5 can't play video with the new driver. It worked fine with 296. If I use 296, premiere cc can't detect cuda.
Any solutions? Like switch nvidia driver for different premiere versions?

Any driver pre 320.xx apprear solid.
Peter Garaway
Adobe
Premiere Pro

Similar Messages

Media Encoder CS6 not working with Premiere

Hi
I have been merrily editing a lager job in Adobe Premiere CS6 and then queuing the time lines to export in media encoder CS6 done the entire job everything rendered fine then Bam all of a sudden when I try and render I get all the audio a couple of frames of video then just black!!
I have tried different codecs same result, I have tried different timelines same result, When I export directly out of Premiere without going through Media encoder all works fine, when I try encoding a file directly in media encoder works ok, It just seems to be the link between Premiere and Media encoder that not working as it should
Anyone got any ideas?
Hi Folks
Has no one had an issue exporting to Media encoder from Adobe Premiere CS6?

Any chance this gets fixed soon? I'm shooting with an AF-100, and at this point I'm still using Final Cut to transcode my footage so I can have audio. I've also noticed the video jumps around even when it does have audio. Prelude has been extremely problematic for me, and it doesn't have a way to bring in clips that returned errors upon importing, I have to write down the clip numbers and bring them in individually. I've also tried just dropping the file structure from the card straight to the hard drive. It's a huge problem, and is keeping me from making the switch fully from FCP 7.

Hard drive broke. ipod not working with new computer

Hello,
My computer hard drive recently died on me.
I got a new hard drive installed and I downloaded a new version of itunes (I think the latest) but when I connect my ipod to my computer, although it turns on the ipod, my computer isn't reading the ipod. I tunes isn't being started up and when I start it up manually it doesn't read my ipod either.
Someone at work here suggested it may be that the version of itunes I have installed is not compatible with the ipod I have. My ipod is a couple of years old at least. Can that be possible?
Any help greatly appreciated.

I have the exact same problem. Any help would be appreciated.

Blackmagic ultra studio sdi not working with Premiere Pro 8cc or A.E.cc(2014) on win7 GT630m i7 laptop - But works in A.E.cc(12.2.1.5)

There's a problem with the new update, as I no longer can use my BM Ultra Stdio SDI for monitoring. It let me select it but no image just black frame, with the new premiere pro cc 8 or a.e. cc (2014)
But i have No Problem in A.E. cc (12.2.1.5) work find just like it should, So what has happen here ? My system is Win7 Ultmate Laptop i7 Toshiba Satellite p850, dual gpu's GT630m & Intel HD 4000
With the latest blalckmagic drivers installed (10.1.1) This needs to be looked into, there is no way of monitoring accurately .

Problem Solved! (with a small catch)
While searching crashing issues I came across this thread,"Premiere Pro random crashing since update to 2014.2"
Marc_Lec Answered (and I paraphrase here)"...I had the same problem and this is what I did. In 'Preferences Memory' I increased the memory reserved for other application to at least half the installed and changed the optimize render from 'performance' to 'memory."
Thank You Marc_Lec for what has been a game changer for me since my last computer and the beginning of PremiereCC problems.
I changed my Memory reserved for Other Applications from the default 7gigs to 1/2 of my approx.31 available Gigs = 16Gigs. Viola!
No more crashing what-so-ever!
I still have to purchase an older GTX 980 graphics card to take advantage of Adobe's approved code to utilize X=Cuda Cores and GPU, but I think I'll hang onto my new TitanX, in hopes that Adobe will write code and approve it someday in the near future.
Now why doesn't Adobe say this officially about Memory Settings? (I don't know maybe they do and I missed I somewhere)
Mine and probably many peoples computers problems here on this board may be attributed to a simple Memory adjustment, because the computer needs more than 7Gigs to run itself, not to mention Premiere.

Will this graphics card work with Premiere CS5.5

We're running a Mac Pro 2 x 2.93 GHz Quad-Core Intel Xeon, 32GB Ram, 10.6.8 and we're looking to move from Apple's FCP to Premiere CS5 but noticed in Adobe's systems requirements on graphic cards the following:
Adobe-certified GPU card for GPU–accelerated performance; visit www.adobe.com/go/premiere_systemreqs for the latest list of supported cards
Here's the list of cards for Mac:
GeForce GTX 285 (Windows and Mac OS)
Quadro FX 4800 (Windows and Mac OS)
Quadro 4000 (Windows and Mac OS)
I don't see any ATI cards and we have a top of the line ATI Radeon HD 4870 this the work station. (link of card specs below)
http://www.amd.com/us/products/desktop/graphics/ati-radeon-hd-4000/hd-4850/Pages/ati-radeo n-hd-4850-specifications.aspx
Does anyone know if the ATI Radeon HD 4870 will work or are there any limitations?

Martin Jordan wrote:
So you're saying that the "Quadro 4000 (Windows and Mac OS)" is the best choice to upgrade from my ATI card?
If you're doing things that will take advantage of the hardware within PPro, then yes. But before you open your wallet, make sure what you're doing will be able to take advantage of the CUDA processors.
jas

Composite view not working with Premiere Pro CC 2014

I've got a user in our office who, all of a sudden, can't see any image in composite view when editing in CC 2014 - the other views work OK and he's able to generate files OK, but he can't see the actual editable image in the editor. This is a problem .
Early '09 Mac Pro running Mac OS X 10.8.5. NVidia Quadro 4000 video card w/ latest CUDA driver (6.5.18).
Strangely, Adobe CC (non-2014) still works OK. And the user tells me that CC 2014 WAS initially working OK but that it suddenly stopped working. I've tried a reinstall; no luck.

Just found the answer:
Composite Video Not Displaying on Source and Program Monitors

My GTX580 is not working with premiere cs6

I just bought a GTX580 in the hopes of getting faster rendering and exporting.
Premiere says that it's enabled "Mercury playback engine GPU Acce..." But when i export the CPU works instead of the GPU, Any ideas? Thanks .

Of course there are many more Premiere effects and features that are MPE accelerated if you use them,here are some:
• scaling (details here) • deinterlacing • blending modes • color space conversions • Alpha Adjust • Basic 3D • Black & White • Brightness & Contrast • Color Balance (RGB) • Color Pass • Color Replace • Crop • Drop Shadow • Extract • Fast Color Corrector • Feather Edges • Gamma Correction • Garbage Matte (4, 8, 16) • Gaussian Blur • Horizontal Flip • Levels • Luma Corrector • Luma Curve • Noise • Proc Amp • RGB Curves • RGB Color Corrector • Sharpen • Three-way Color Corrector • Timecode • Tint • Track Matte • Ultra Keyer • Video Limiter • Vertical Flip • Cross Dissolve • Dip to Black • Dip to White • Film Dissolve • Additive Dissolve • Invert • Directional Blur • Fast Blur • frame rate differences • field order differences • pixel aspect ratio differences • frame size differences • media with different alpha channel representations •

What is needed to restore functionality to my CD drives--they do not work with iTunes version 10

I am running Windows 7 on an older computer. Previously, I experienced no difficulty playing iTunes or burning iTunes music to CD. At some point, after downloading newer version of iTunes I lost functionality in both of my disc drives (1 = Liteon DVDRW and 1 = Matshita DVDRW).
Recently I attempted to install latest version of iTunes, thinking perhaps the new version might address some of my disc drive issues--the problem: Part way through installation the message, "Windows Installer unable to find necessary file," and alas, install fails.
Short of buying a new computer, what can be done to solve my disc drive issues?

(1) Yes, iTunes is currently installed.
(2) Here are the diagnostics you requested:
Microsoft Windows 7 Ultimate Edition Service Pack 1 (Build 7601)
Gateway E-4650
iTunes 10.4.1.10
QuickTime 7.7
FairPlay 1.12.20
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.1.485
Gracenote MusicID 1.9.1.102
Gracenote Submit 1.9.1.133
Gracenote DSP 1.9.1.43
iTunes Serial Number 0030B020037AE7E8
Current user is not an administrator.
The current local date and time is 2012-01-05 22:21:38.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce FX 5200
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.4.1.10 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
G: LITE-ON DVDRW SOHW-1633S, Rev BS0Y
Drive is empty.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive G: LITE-ON DVDRW SOHW-1633S on CDR media at speed 16X.
> Thank you for taking the time to look into my problem! I hope this information proves useful.
chenrickson

DNxHD not working with Premiere in my PC? Desperate for help!

Hello all,
So I have 3 questions. I'm absolutely exhausted of trying to figure out which codec to transcode my footage in my PC for AP (I shoot canon 5D, giving me h264 files). I will never edit with h264 (even though AP edit natively), no questions about it!
To make my story short, I migrated from Final Cut Pro in my MAC, to Adobe Premiere in my PC (no more MAC). Reasons are a long story. Anyways, I read all over that the most similar codec to ProRes is DNxHD possible in PC and Adobe Premiere, and Cineform.
1) Cool, I downloaded DNxHD, and when I go to Media Encoder, it shows something called "dnxhd mxf op1a". When I transcode, it gives me a .mxf file that is unreadable by my pc, and when I drag it into AP, it gives me an error message. What's going on? How come it isn't in .mov? what should I do then? I read there is a converter .mxf to .mov, but isn't that process going to downgrade more the quality of my footage? Please help! Which is the workflow then? I read all over that many people edit in AP in PC using DNxHD. How come I can't?
2) In the research, very frustrated, I read about Cineform codec as a 3rd possibility, which luckily it comes with Adobe for free. I transcoded to that in AME, and it changes the contrast a lot, it washes out the footage looking very bright. Actually h264 looks much better! (how is that possible?) Am I doing something wrong?
3) Please I would truly appreciate answers and, in that case, step-by-step workflows. Maybe I'm doing something wrong in the process or I'm missing a step, and I need to understand. Please I would truly appreciate any suggestions for transcoding footage in a PC before importing it to Adobe Premiere. This cannot be the end of the road!
Thanks so very much!
Elaine.-

Hi Elaine,
When you said you downloaded DNxHD...did you also actually install it? The "dnxhd mxf op1a" encoding option in AME is already there by default, and is different than the downloaded DNxHD codec, which ought to encode as a .mov file. I don't have access at this moment to check in Premiere, but I'm pretty certain you did NOT encode to the format you thought you did. Once the DNxHD codec is properly installed, it should show up when you choose "QuickTime" as the FORMAT in AME. Then under the VIDEO tab, hit the drop down for CODECS and it ought to appear there as an option. Then you can export the .mov file you wanted to.
EDIT: Verified, I downloaded and installed the Avid codec and DNxHD now appears under "QuickTime" and does render out simply as a .mov file, no fuss
Edit 2: For anyone wanting to try DNxHD for Mac or PC, available at this link, had a hard time finding it - Avid Codecs LE 2.3.9
Thanks
Jeff Pulera
Safe Harbor Computers

Encore not working with Premiere Pro

I downloaded the Premiere Pro cs3 trial version. I then upgraded it to the full version but for some reason cannot seem to export via Encore. It seems as if Encore is not installed or setup right? What do you think the problem would be?

If you installed from a download, so you don't have an install DVD, read the FAQ article
Converting Download Trial to Registered
(read subject
How do I convert a trial version to a version for unrestricted use?)

Edit: Touchscreen not working with photoshop cs5

When using photoshop cs5, I am unable to use any tool properly when using the touch screen.
Using the touchscreen, I am able to select the tool and other buttons, but when i attempt to draw with the brush tool, dragging a stylus across the screen does not create a line, and only visual feedback is seen. Dots can be drawn, ad the only way a line can be created is to double-click and drag which does not always work and is irritating to use.
Please help, I have tried searching for a long while and even contacted computer support but they directed me here. I am unable to find a suitable driver, as suggested on the troubleshooting page or any other solution. Any advice is greatly appreciated, thanks.
Computer: Asus Vivobook S550CM
System: Windows 8

This have been touch on many times here. There are two api use to support touch type devices like tablets and touch screens. The API that many touch screen tablet and computers use lack features Adobe Pen support uses example the API does not support things like pen tilt. Therefore Adobe does not support this API. You need a device driver for you touch screen that user the API Adobe uses for tablet support.

Camera Raw 6.7 installation not working with Photoshop CS5.1

I have been trying to upgrade Camera Raw to 6.7 on my windows 7(32) machine running CS5.1.
It will not update via Help>Update (indicates download problem) or manually using the downloaded file and AdobePatchInstaller.exe (indicates "an error installing the update")
I have tried Adobe support adviser but this was of little help.
Also tried running Photoshop as Administrator.
Can anyone help?

I don't know why your Help - Updates feature shouldn't be working; it worked for me, and it would disturb me if it didn't work, but to jump to the solution to your issue, you should be able to install the update manually by carefully following the instructions that go with the download you can find here:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5373
Make sure you unzip the contents of the file to a folder on your computer before running the installer.
-Noel

Audition problems with Premiere CS5

Has anyone had problems with Audition 5.5 not functioning with Premiere CS5. I have both programs (but not a part of the Suite). So, Audition CS5 is installed and so is Premiere CS5. After separating a sound channel, I want to pick the Edit with Audition from the drop down but the Edit with Audition is muted; interesting however is the Edit with Soundbooth is highlighted and it works. But I would like to work with Audition instead. Anyone have those sorts of problems?

This built-in functionality works only with Premiere CS5.5, I believe. There may be some registry hacks or something to make it work a little with Premiere CS5.0, but I have a feeling the only way to successfully fly stuff back and forth as intended is to get the upgrade.
Now, if that's actually what you have, and this is happening, then that's a different problem altogether.

Fine tuning nvidia quadro k4000 to work with premiere pro cc

Would anyone know the correct settings for nvidia quadro k4000 to work with premiere pro cc please?
Currently it's only using 33% of it's full power when rendering, while the CPU is running @ 95%
Mercury playback engine GPU is selected.
Thank you in advance

why would the encoder have the option to choose between mercury playback engine using GPU, or sofware encoding only!
From the article linked to earlier:
The video card and hardware MPE is not the holy grail. It helps in some circumstances to improve performance and rather significantly, but in other instances it does not help at all, as is indicated in the link above. People often think that installing a super fast video card will reduce export times by a significant amount of time. That is not true. It only helps in a limited number of situations. Keep in mind that:
Encoding to an export format is done by the CPU, not the GPU. No performance gain from a video card.
Frame rate changes, frame blending is done by a suitable video card, for instance exporting to 24P from 29.97i or 60P. Here there is a clear performance gain.
Scaling is also helped by hardware MPE, for instance going from 4K to HD or from HD to SD. Again a clear performance gain.
Rendering for preview is helped by the video card only for accelerated effects.

NVIDIA Tools now not working with PS CC, is there any other add-on besides NVIDIA that will open .DDS files in photoshop?

I had no problems with CS6 PS, but since I upgraded to PS CC, NVIDIA Tools is now not working and crashes when I try to reinstall the plug-in into PS CC. I checked NVIDIA's forums and found ZIP from them about this problem. So I am asking in here, is there another plug-in that will open .DDS files in PS? I am using Windows 7 Ultimate x64 for the OS, and I know the PS CC is 32 bit. Until I can resolve this issue, I am unable to do repaints of PMDG aircraft for my VA. Any suggestions would be greatly appreciated.

I had a similar issue but i solved it following the instructions explained here https://wiki.archlinux.org/index.php/Bu … l.2FNVIDIA.
I also reccomend you to install the bbswitch package which disables NVIDIA discrete graphics card when isn't used.

Nvidia driver 320.49 not work with premiere cs5

Similar Messages

Maybe you are looking for