Nvidia Driver (Bumblebee or proprietary Nvidia?)

Hi, I have a laptop with Nvidia GeForce GT 640M graphics card and I'll to install graphics drivers, but I don't know which drivers are better.
What performs better? Nvidia or Bumblebee?
Thanks!

Sorry, I explain it:
The last time I used ArchLinux I installed Bumblebee and work nice, but after few weeks Bumblebee started giving problems.
I would like know which is better? if install Bumblebee or proprietary Nvidia Drivers. What gives less problems?
Thanks!

Similar Messages

  • Problem with nvidia driver (bumblebee)

    I have problem with nvidia driver. It's not work with bumblebee. nouveau works, but nvidia not. My laptop: Clevo W110ER (i7 3612, GF GT650M).
    ----- optirun glxspheres -----
    - nouveau: works, but 3d is very slow (on Intel is better)
    - nvidia: Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please ...
    Linux kernel: 3.4~ (latest from REPO).
    How to configure it? (On Ubuntu works, on Arch not).

    Your not the only one with nividia problems
    But on a more serious note, have you tried all configuration steps outlined in the Arch Wiki?
    Moderator edit:  Picture NSFW.  It is also too big.
    User edit: Fixed with Thumbnail.
    Last edited by jwele (2012-07-04 21:00:37)

  • Acer V5-573g: Getting Nvidia 750m to work with prop. driver+bumblebee

    Dear Arch community,
    I have problems in getting my nvidia card to work using the prop drivers and bumblebee.
    I followed the steps in bumblee wiki entry: https://wiki.archlinux.org/index.php/Bu … l.2FNVIDIA
    pacman -S intel-dri xf86-video-intel bumblebee nvidia
    added user to bimblebee-group, but unfortunately I get the following error:
    If a run the command for the 1. time:
    sudo optirun glxgears -info
    [ 1168.770796] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
    [ 1168.770834] [ERROR]Aborting because fallback start is disabled.
    If I round it a 2. time:
    sudo optirun glxgears -info
    [ 2322.784161] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Server terminated successfully (0). Closing log file.
    [ 2322.784196] [ERROR]Aborting because fallback start is disabled.
    The help section in the wiki regarding this problem (https://wiki.archlinux.org/index.php/Bu … ondary_GPU) doesnt help me. Additionally I do not have a 20-intel.conf file as is mentioned in one of the solutions there (why??)
    cd /etc/X11/xorg.conf.d/
    ls
    00-keyboard.conf  10-evdev.conf  10-quirks.conf  50-synaptics.conf
    some further information:
    sudo lspci
    00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
    01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 750M] (rev a1)
    lspci -v | perl -ne '/VGA/../^$/ and /VGA|Kern|3D|Display/ and print'
    00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
        Kernel driver in use: i915
        Kernel modules: i915
    sudo lspci -d10de: -vvv01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 750M] (rev ff) (prog-if ff)
        !!! Unknown header type 7f
        Kernel modules: nouveau, nvidia
    The wiki states, the nvidia runs out of the box:
    https://wiki.archlinux.org/index.php/Ac … re_V5-573G
    Everything pretty much works out of the box, follow standard documentation for details.
    I found a problem which seems maybe related:
    https://devtalk.nvidia.com/default/topi … r-crash/1/
    But my knowledge is to limited (1 year in linux) to solve this problem on my own.
    Hoping for help,
    bkk
    Last edited by bkk (2014-02-26 15:02:18)

    [This issue has been solved for me. Scroll down to "Edit3" for the solution]
    I'm facing the same problems on a Dell M3800 Notebook, including a Quadro K1100M and HD4600 iGPU. There could be something wrong with my configuration, but I also think, there is some upstream bug, as I'm facing the same issue:
    [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
    Installing xf86-input-mouse and rebooting results in the same error as agahnim already stated: "Cannot initialize GPU at PCI:2:0:0", eventhough the PCI address is correct (lscpi tells me 02:00.0). So far, I've changed BusID to PCI:2:0:0 in bumblebee configs - there is no xorg.conf file and I also don't have any intel or nvidia specific conf files in xorg.conf.d. Everything else is on stock.
    Of course, I've tried numerous xorg.conf files, too, but nothing successful. I'm able to disable the Nvidia graphics and save power, but there is no way to run optirun. As stated in the Docs, I've installed (only relevant packages):
    xf86-video-intel + deps
    nvidia + deps
    mesa
    bbswitch
    bumblebee
    Installing and running primus didn't help; it resulted in the same errors as optirun. So, do you think, that this is a configuration related error or really something upstream, probably affecting GK107+ GPUs and / or Haswell systems? There were some documentations on how to enable bumblebee for Linux on my specific machine, but they didn't help aswell. They were made for Ubuntu 13.10 (in contrast, I'm running latest software, including Kernel 3.13 and latest Nvidia driver).
    //Edit: This is my dmesg. If I interpret the error messages right, it seems to be an ACPI bug, related to my Laptop.
    [ 276.082268] bbswitch: enabling discrete graphics
    [ 276.717738] nvidia: module license 'NVIDIA' taints kernel.
    [ 276.717742] Disabling lock debugging due to kernel taint
    [ 276.724937] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:02:00.0 on minor 1
    [ 276.724941] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.49 Wed Feb 12 20:42:50 PST 2014
    [ 276.851917] vgaarb: this pci device is not a vga device
    [ 276.853336] nvidia 0000:02:00.0: irq 54 for MSI/MSI-X
    [ 276.859491] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 276.859534] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 276.859556] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 276.859575] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 276.859593] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 276.859612] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 276.859642] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 276.859661] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 282.653640] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 282.679204] NVRM: GPU at 0000:02:00.0 has fallen off the bus.
    [ 282.679212] NVRM: os_pci_init_handle: invalid context!
    [ 282.679214] NVRM: os_pci_init_handle: invalid context!
    [ 282.679218] NVRM: GPU at 0000:02:00.0 has fallen off the bus.
    [ 282.679220] NVRM: os_pci_init_handle: invalid context!
    [ 282.679221] NVRM: os_pci_init_handle: invalid context!
    [ 282.696387] NVRM: RmInitAdapter failed! (0x25:0x28:1156)
    [ 282.696395] NVRM: rm_init_adapter failed for device bearing minor number 0
    [ 282.696410] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
    This could be related, too (appeared upon booting - I've cut out obviously unrelated logs, like Touchpad driver loaded etc.):
    [ 11.739221] bbswitch: version 0.8
    [ 11.739224] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
    [ 11.739227] bbswitch: Found discrete VGA device 0000:02:00.0: \_SB_.PCI0.PEG0.PEGP
    [ 11.739238] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 11.739304] bbswitch: detected an Optimus _DSM function
    [ 11.739315] pci 0000:02:00.0: enabling device (0006 -> 0007)
    [ 11.739355] bbswitch: Succesfully loaded. Discrete card 0000:02:00.0 is on
    [ 11.740352] bbswitch: disabling discrete graphics
    [ 11.740358] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 13.355100] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 13.405069] Console: switching to colour frame buffer device 240x67
    [ 13.412109] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 13.412110] i915 0000:00:02.0: registered panic notifier
    [ 13.412221] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
    [ 13.432539] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
    [ 13.432615] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:44/LNXVIDEO:00/input/input12
    [ 13.433102] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 13.433516] acpi device:4b: registered as cooling_device11
    [ 13.433647] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
    [ 13.434589] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 13.434673] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
    [ 13.434677] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    //Edit2: This issue seems related: https://bbs.archlinux.org/viewtopic.php?pid=1384782. Okay, so it sounds like a Linux upstream bug.
    //Edit3: Possible workaround for now, is adding "rcutree.rcu_idle_gp_delay=1" to Kernel line. This fixed my problem for now. Don't forget to install xf86-input-mouse and changing bumblebee configs according to your BusID, which can be found with "lspci". Good luck!
    Last edited by tolga9009 (2014-03-01 19:14:21)

  • Black screen - Xorg/GDM config - Nvidia Optimus? [solved]

    Hi!
    I have a Samsung RC539 S09, which has got an Nvidia Optimus graphics card, I want a graphical Xserver on that machine. Therefore I followed the wiki and installed the Nvidia stuff (https://wiki.archlinux.org/index.php/NVIDIA). I did not configure anything jet. I also installed the Xorg stuff and kept the config default (https://wiki.archlinux.org/index.php/Xorg). Then I did nvidia-xconfig:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 280.13 ([email protected]
    ia.com) Wed Jul 27 17:15:58 PDT 2011
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    I have dbus runnung and do rc.d/gdm start.
    [root@myhost ~]# gdm-binary[1147]: WARNING: GdmDisplay: display lasted 1.143111 seconds
    gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029825 seconds
    gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029360 seconds
    gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029428 seconds
    gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029470 seconds
    gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029108 seconds
    gdm-binary[1147]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors
    My logfile says, that after successfully loading the modules, the failure occures at:
    [ 591.812] (EE) No devices detected.
    [ 591.812]
    Fatal server error:
    [ 591.812] no screens found
    [ 591.812]
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    What does that mean? - No devices detected - can refer to these Nvidia Optimus stuff, where there's some ondemand switching for graphics acceleration afaik. I'm not sure how to solve my issue. So at this point could need some help
    Best,
    wishi
    edit: got this working with the intel stuff. Did onyone archive GPU support jet?
    Last edited by windsheep (2011-08-20 20:34:25)

    first at all check
    lspci | grep -i vga
    I have optimus and I see both cards, Intel and nVidia.
    What do you see?
    If you install xf86-video-intel instead of nvidia driver, does it work then? (backup & remove /etc/X11/xorg.conf then)
    I had to disable optimus and switch to my dedicated nVidia graphics card  in bios in order to make nvidia driver work.
    Now I'm using intel with bumblebee (optimus support for linux) & optimus enabled in bios, and bumblebee loads proprietary nvidia drivers when required.
    But I also have a thinkpad t510, I don't know if bumblebee works with your device.
    cheers, kulpae
    Last edited by kulpae (2011-08-20 14:45:41)

  • [SOLVED?] Problem with nVidia card

    This is my first post, so; hello to everyone!! Thx in advance to this great community!!
    My problem is pretty strange and anoying. I have an nVidia 8600GT in a Abit AX78 MB running Arch with KDE. Anything is going right until logon process. I write the user and password in KDM screen and then, after de animation of init proces of KDE, all graphics displayed are corrupted (a rectangle in the upper left corner is showed) and that's it. Only work the mouse pointer.
    This malfunction its showed by the nouveau driver AND the proprietary driver... So i think the problem is it in other place than the driver of the card.
    The Xorg.0.log and dmesg.log files are atached at the end of this thread.
    I hope that annyone can help me.
    Thx in advance again.
    The Xorg.0.log file contains this:
    [ 15.809]
    X.Org X Server 1.10.3
    Release Date: 2011-07-08
    [ 15.814] X Protocol Version 11, Revision 0
    [ 15.814] Build Operating System: Linux 2.6.39-ARCH i686
    [ 15.814] Current Operating System: Linux hidramedia_host 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686
    [ 15.815] Kernel command line: root=/dev/sda5 ro
    [ 15.815] Build Date: 09 July 2011 07:57:07AM
    [ 15.815]
    [ 15.815] Current version of pixman: 0.22.2
    [ 15.815] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 15.815] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 15.815] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 1 14:13:23 2011
    [ 15.829] (==) Using config file: "/etc/X11/xorg.conf"
    [ 15.829] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 15.835] (==) ServerLayout "Layout0"
    [ 15.835] (**) |-->Screen "Screen0" (0)
    [ 15.835] (**) | |-->Monitor "Monitor0"
    [ 15.836] (**) | |-->Device "Device0"
    [ 15.836] (**) |-->Input Device "Keyboard0"
    [ 15.836] (**) |-->Input Device "Mouse0"
    [ 15.836] (==) Automatically adding devices
    [ 15.836] (==) Automatically enabling devices
    [ 15.859] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 15.859] Entry deleted from font path.
    [ 15.859] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 15.859] Entry deleted from font path.
    [ 15.859] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 15.859] Entry deleted from font path.
    [ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 15.859] Entry deleted from font path.
    [ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 15.859] Entry deleted from font path.
    [ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 15.859] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 15.859] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 15.859] (**) Extension "Composite" is disabled
    [ 15.859] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 15.859] (WW) Disabling Keyboard0
    [ 15.859] (WW) Disabling Mouse0
    [ 15.859] (II) Loader magic: 0x822e1a0
    [ 15.859] (II) Module ABI versions:
    [ 15.859] X.Org ANSI C Emulation: 0.4
    [ 15.859] X.Org Video Driver: 10.0
    [ 15.859] X.Org XInput driver : 12.2
    [ 15.859] X.Org Server Extension : 5.0
    [ 15.860] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
    [ 15.860] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 15.860] (II) LoadModule: "extmod"
    [ 15.871] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 15.880] (II) Module extmod: vendor="X.Org Foundation"
    [ 15.880] compiled for 1.10.3, module version = 1.0.0
    [ 15.880] Module class: X.Org Server Extension
    [ 15.880] ABI class: X.Org Server Extension, version 5.0
    [ 15.880] (II) Loading extension MIT-SCREEN-SAVER
    [ 15.880] (II) Loading extension XFree86-VidModeExtension
    [ 15.880] (II) Loading extension XFree86-DGA
    [ 15.880] (II) Loading extension DPMS
    [ 15.880] (II) Loading extension XVideo
    [ 15.880] (II) Loading extension XVideo-MotionCompensation
    [ 15.880] (II) Loading extension X-Resource
    [ 15.880] (II) LoadModule: "dbe"
    [ 15.880] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 15.881] (II) Module dbe: vendor="X.Org Foundation"
    [ 15.881] compiled for 1.10.3, module version = 1.0.0
    [ 15.881] Module class: X.Org Server Extension
    [ 15.881] ABI class: X.Org Server Extension, version 5.0
    [ 15.881] (II) Loading extension DOUBLE-BUFFER
    [ 15.881] (II) LoadModule: "glx"
    [ 15.881] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 16.640] (II) Module glx: vendor="NVIDIA Corporation"
    [ 16.640] compiled for 4.0.2, module version = 1.0.0
    [ 16.640] Module class: X.Org Server Extension
    [ 16.640] (II) NVIDIA GLX Module 275.21 Mon Jul 18 14:55:52 PDT 2011
    [ 16.640] (II) Loading extension GLX
    [ 16.640] (II) LoadModule: "record"
    [ 16.641] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 16.645] (II) Module record: vendor="X.Org Foundation"
    [ 16.645] compiled for 1.10.3, module version = 1.13.0
    [ 16.645] Module class: X.Org Server Extension
    [ 16.645] ABI class: X.Org Server Extension, version 5.0
    [ 16.645] (II) Loading extension RECORD
    [ 16.645] (II) LoadModule: "dri"
    [ 16.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 16.661] (II) Module dri: vendor="X.Org Foundation"
    [ 16.661] compiled for 1.10.3, module version = 1.0.0
    [ 16.661] ABI class: X.Org Server Extension, version 5.0
    [ 16.661] (II) Loading extension XFree86-DRI
    [ 16.661] (II) LoadModule: "dri2"
    [ 16.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 16.662] (II) Module dri2: vendor="X.Org Foundation"
    [ 16.662] compiled for 1.10.3, module version = 1.2.0
    [ 16.662] ABI class: X.Org Server Extension, version 5.0
    [ 16.662] (II) Loading extension DRI2
    [ 16.662] (II) LoadModule: "nvidia"
    [ 16.662] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 16.709] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 16.709] compiled for 4.0.2, module version = 1.0.0
    [ 16.709] Module class: X.Org Video Driver
    [ 16.732] (II) NVIDIA dlloader X Driver 275.21 Mon Jul 18 14:38:30 PDT 2011
    [ 16.737] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 16.740] (++) using VT number 7
    [ 16.751] (II) Loading sub module "fb"
    [ 16.751] (II) LoadModule: "fb"
    [ 16.751] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 16.762] (II) Module fb: vendor="X.Org Foundation"
    [ 16.762] compiled for 1.10.3, module version = 1.0.0
    [ 16.762] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.762] (II) Loading sub module "wfb"
    [ 16.762] (II) LoadModule: "wfb"
    [ 16.763] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 16.769] (II) Module wfb: vendor="X.Org Foundation"
    [ 16.769] compiled for 1.10.3, module version = 1.0.0
    [ 16.769] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.769] (II) Loading sub module "ramdac"
    [ 16.769] (II) LoadModule: "ramdac"
    [ 16.769] (II) Module "ramdac" already built-in
    [ 16.771] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 16.771] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 16.771] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 16.780] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 16.780] (==) NVIDIA(0): RGB weight 888
    [ 16.780] (==) NVIDIA(0): Default visual is TrueColor
    [ 16.780] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 17.785] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
    [ 17.785] (II) NVIDIA(GPU-0): 3D Vision stereo.
    [ 17.789] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
    [ 17.789] (--) NVIDIA(0): Memory: 262144 kBytes
    [ 17.789] (--) NVIDIA(0): VideoBIOS: 60.84.35.00.00
    [ 17.789] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 17.789] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 17.789] (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0
    [ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0)
    [ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
    [ 17.859] (II) NVIDIA(0): Assigned Display Device: CRT-0
    [ 17.859] (==) NVIDIA(0):
    [ 17.859] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 17.859] (==) NVIDIA(0): will be used as the requested mode.
    [ 17.859] (==) NVIDIA(0):
    [ 17.859] (II) NVIDIA(0): Validated modes:
    [ 17.859] (II) NVIDIA(0): "nvidia-auto-select"
    [ 17.859] (II) NVIDIA(0): Virtual screen size determined to be 800 x 600
    [ 17.900] (--) NVIDIA(0): DPI set to (72, 72); computed from "UseEdidDpi" X config
    [ 17.900] (--) NVIDIA(0): option
    [ 17.900] (--) Depth 24 pixmap format is 32 bpp
    [ 17.901] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 17.905] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 17.905] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 17.905] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 17.905] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 17.905] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 17.905] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 17.905] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 17.905] (II) NVIDIA(0): Config Options in the README.
    [ 17.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 17.946] (II) Loading extension NV-GLX
    [ 18.001] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 18.002] (==) NVIDIA(0): Backing store disabled
    [ 18.002] (==) NVIDIA(0): Silken mouse enabled
    [ 18.002] (**) NVIDIA(0): DPMS enabled
    [ 18.002] (II) Loading extension NV-CONTROL
    [ 18.003] (II) Loading extension XINERAMA
    [ 18.003] (II) Loading sub module "dri2"
    [ 18.003] (II) LoadModule: "dri2"
    [ 18.003] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 18.003] (II) Module dri2: vendor="X.Org Foundation"
    [ 18.003] compiled for 1.10.3, module version = 1.2.0
    [ 18.003] ABI class: X.Org Server Extension, version 5.0
    [ 18.003] (II) NVIDIA(0): [DRI2] Setup complete
    [ 18.003] (==) RandR enabled
    [ 18.003] (II) Initializing built-in extension Generic Event Extension
    [ 18.003] (II) Initializing built-in extension SHAPE
    [ 18.003] (II) Initializing built-in extension MIT-SHM
    [ 18.003] (II) Initializing built-in extension XInputExtension
    [ 18.003] (II) Initializing built-in extension XTEST
    [ 18.003] (II) Initializing built-in extension BIG-REQUESTS
    [ 18.003] (II) Initializing built-in extension SYNC
    [ 18.003] (II) Initializing built-in extension XKEYBOARD
    [ 18.003] (II) Initializing built-in extension XC-MISC
    [ 18.003] (II) Initializing built-in extension SECURITY
    [ 18.003] (II) Initializing built-in extension XINERAMA
    [ 18.003] (II) Initializing built-in extension XFIXES
    [ 18.003] (II) Initializing built-in extension RENDER
    [ 18.003] (II) Initializing built-in extension RANDR
    [ 18.003] (II) Initializing built-in extension COMPOSITE
    [ 18.003] (II) Initializing built-in extension DAMAGE
    [ 18.005] (II) Initializing extension GLX
    [ 18.213] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 18.213] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 18.213] (II) LoadModule: "evdev"
    [ 18.213] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.214] (II) Module evdev: vendor="X.Org Foundation"
    [ 18.214] compiled for 1.10.0, module version = 2.6.0
    [ 18.214] Module class: X.Org XInput Driver
    [ 18.214] ABI class: X.Org XInput driver, version 12.2
    [ 18.214] (II) Using input driver 'evdev' for 'Power Button'
    [ 18.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.214] (**) Power Button: always reports core events
    [ 18.214] (**) Power Button: Device: "/dev/input/event3"
    [ 18.226] (--) Power Button: Found keys
    [ 18.226] (II) Power Button: Configuring as keyboard
    [ 18.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 18.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 18.226] (**) Option "xkb_rules" "evdev"
    [ 18.226] (**) Option "xkb_model" "evdev"
    [ 18.226] (**) Option "xkb_layout" "us"
    [ 18.252] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 18.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 18.252] (II) Using input driver 'evdev' for 'Power Button'
    [ 18.252] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.252] (**) Power Button: always reports core events
    [ 18.252] (**) Power Button: Device: "/dev/input/event2"
    [ 18.266] (--) Power Button: Found keys
    [ 18.266] (II) Power Button: Configuring as keyboard
    [ 18.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 18.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 18.266] (**) Option "xkb_rules" "evdev"
    [ 18.266] (**) Option "xkb_model" "evdev"
    [ 18.266] (**) Option "xkb_layout" "us"
    [ 18.271] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/event1)
    [ 18.271] (**) Primax Electronics Wireless Mouse: Applying InputClass "evdev pointer catchall"
    [ 18.271] (II) Using input driver 'evdev' for 'Primax Electronics Wireless Mouse'
    [ 18.271] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.271] (**) Primax Electronics Wireless Mouse: always reports core events
    [ 18.271] (**) Primax Electronics Wireless Mouse: Device: "/dev/input/event1"
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found 3 mouse buttons
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found scroll wheel(s)
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found relative axes
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found x and y relative axes
    [ 18.283] (II) Primax Electronics Wireless Mouse: Configuring as mouse
    [ 18.283] (II) Primax Electronics Wireless Mouse: Adding scrollwheel support
    [ 18.283] (**) Primax Electronics Wireless Mouse: YAxisMapping: buttons 4 and 5
    [ 18.283] (**) Primax Electronics Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 18.283] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1/event1"
    [ 18.283] (II) XINPUT: Adding extended input device "Primax Electronics Wireless Mouse" (type: MOUSE)
    [ 18.283] (II) Primax Electronics Wireless Mouse: initialized for relative axes.
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) keeping acceleration scheme 1
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration profile 0
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration factor: 2.000
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration threshold: 4
    [ 18.283] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/mouse0)
    [ 18.283] (II) No input driver/identifier specified (ignoring)
    [ 18.285] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
    [ 18.285] (II) No input driver/identifier specified (ignoring)
    [ 18.285] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event6)
    [ 18.285] (II) No input driver/identifier specified (ignoring)
    [ 18.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 18.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 18.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 18.286] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.286] (**) AT Translated Set 2 keyboard: always reports core events
    [ 18.286] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 18.300] (--) AT Translated Set 2 keyboard: Found keys
    [ 18.300] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 18.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 18.300] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 18.300] (**) Option "xkb_rules" "evdev"
    [ 18.300] (**) Option "xkb_model" "evdev"
    [ 18.300] (**) Option "xkb_layout" "us"
    [ 18.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 18.300] (II) No input driver/identifier specified (ignoring)
    [ 1563.531] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 1563.587] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 1563.587] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 1563.587] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 1563.587] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 1563.587] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 1563.587] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 1563.587] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 1563.587] (II) NVIDIA(0): Config Options in the README.
    And the dmesg.log file contains this:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
    [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
    [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.5 present.
    [ 0.000000] DMI: . ./AX78(AMD770+SB600), BIOS 6.00 PG 01/17/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-CFFFF uncachable
    [ 0.000000] D0000-D3FFF write-back
    [ 0.000000] D4000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
    [ 0.000000] 1 disabled
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00f41f0] f41f0
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [ 0.000000] RAMDISK: 7fdc9000 - 7ffe0000
    [ 0.000000] Allocated new RAMDISK: 375e7000 - 377fd792
    [ 0.000000] Move RAMDISK from 000000007fdc9000 - 000000007ffdf791 to 375e7000 - 377fd791
    [ 0.000000] ACPI: RSDP 000f81d0 00024 (v02 AMD770)
    [ 0.000000] ACPI: RSDT 7fff3000 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP 7fff3080 00074 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT 7fff3100 051E2 (v01 AMD770 AWRDACPI 00001000 MSFT 03000000)
    [ 0.000000] ACPI: FACS 7fff0000 00040
    [ 0.000000] ACPI: SSDT 7fff83c0 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
    [ 0.000000] ACPI: HPET 7fff86c0 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000098)
    [ 0.000000] ACPI: MCFG 7fff8700 0003C (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC 7fff8300 00084 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1159MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007fff0
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0007fff0
    [ 0.000000] On node 0 totalpages: 524159
    [ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f65e6200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2320 pages used for memmap
    [ 0.000000] HighMem zone: 294626 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] Detected use of extended apic ids on hypertransport bus
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
    [ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
    [ 0.000000] Kernel command line: root=/dev/sda5 ro
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 8388096 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
    [ 0.000000] Memory: 2062632k/2097088k available (3376k kernel code, 34004k reserved, 1390k data, 512k init, 1187784k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
    [ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration failed
    [ 0.000000] TSC: Unable to calibrate against PIT
    [ 0.000000] TSC: using HPET reference calibration
    [ 0.000000] Detected 2700.236 MHz processor.
    [ 0.000000] Marking TSC unstable due to TSCs unsynchronized
    [ 0.016736] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.49 BogoMIPS (lpj=9000786)
    [ 0.016870] pid_max: default: 32768 minimum: 301
    [ 0.016983] Security Framework initialized
    [ 0.017051] AppArmor: AppArmor disabled by boot time parameter
    [ 0.017144] Mount-cache hash table entries: 512
    [ 0.017404] Initializing cgroup subsys ns
    [ 0.017471] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.017549] Initializing cgroup subsys cpuacct
    [ 0.017625] Initializing cgroup subsys memory
    [ 0.017701] Initializing cgroup subsys devices
    [ 0.017767] Initializing cgroup subsys freezer
    [ 0.017833] Initializing cgroup subsys net_cls
    [ 0.017899] Initializing cgroup subsys blkio
    [ 0.017995] CPU: Physical Processor ID: 0
    [ 0.018060] CPU: Processor Core ID: 0
    [ 0.018126] mce: CPU supports 5 MCE banks
    [ 0.018199] using C1E aware idle routine
    [ 0.019127] ACPI: Core revision 20110316
    [ 0.023362] ftrace: allocating 15225 entries in 30 pages
    [ 0.026734] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.027332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.061631] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
    [ 0.063329] Performance Events: AMD PMU driver.
    [ 0.063329] ... version: 0
    [ 0.063329] ... bit width: 48
    [ 0.063329] ... generic registers: 4
    [ 0.063329] ... value mask: 0000ffffffffffff
    [ 0.063329] ... max period: 00007fffffffffff
    [ 0.063329] ... fixed-purpose events: 0
    [ 0.063329] ... event mask: 000000000000000f
    [ 0.080086] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.106674] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
    [ 0.106676] Booting Node 0, Processors #1
    [ 0.106783] smpboot cpu 1: start_ip = 9b000
    [ 0.019998] Initializing CPU#1
    [ 0.200085] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.206657] Brought up 2 CPUs
    [ 0.206721] Total of 2 processors activated (10805.88 BogoMIPS).
    [ 0.207206] devtmpfs: initialized
    [ 0.207206] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes)
    [ 0.207649] print_constraints: dummy:
    [ 0.207764] NET: Registered protocol family 16
    [ 0.207919] node 0 link 0: io port [c000, ffff]
    [ 0.207922] TOM: 0000000080000000 aka 2048M
    [ 0.207987] node 0 link 0: mmio [a0000, bffff]
    [ 0.207990] node 0 link 0: mmio [80000000, dfffffff]
    [ 0.207992] node 0 link 0: mmio [f0000000, fe02ffff]
    [ 0.207995] node 0 link 0: mmio [e0000000, e03fffff]
    [ 0.207997] bus: [00, 03] on node 0 link 0
    [ 0.208000] bus: 00 index 0 [io 0x0000-0xffff]
    [ 0.208002] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    [ 0.208003] bus: 00 index 2 [mem 0x80000000-0xefffffff]
    [ 0.208005] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
    [ 0.208011] ACPI: bus type pci registered
    [ 0.208149] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.208227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.208292] PCI: Using MMCONFIG for extended config space
    [ 0.208357] PCI: Using configuration type 1 for base access
    [ 0.208842] bio: create slab <bio-0> at 0
    [ 0.210574] ACPI: EC: Look up EC in DSDT
    [ 0.211181] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.214150] ACPI: Interpreter enabled
    [ 0.214220] ACPI: (supports S0 S3 S4 S5)
    [ 0.214501] ACPI: Using IOAPIC for interrupt routing
    [ 0.225790] ACPI: No dock devices found.
    [ 0.225854] HEST: Table not found.
    [ 0.225919] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.226037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.226190] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.226257] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.226324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.226399] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 0.226474] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff]
    [ 0.226562] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
    [ 0.226576] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    [ 0.226609] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
    [ 0.226636] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.226639] pci 0000:00:02.0: PME# disabled
    [ 0.226667] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
    [ 0.226693] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    [ 0.226696] pci 0000:00:0a.0: PME# disabled
    [ 0.226723] pci 0000:00:12.0: [1002:4380] type 0 class 0x000106
    [ 0.226742] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
    [ 0.226752] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
    [ 0.226763] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
    [ 0.226773] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
    [ 0.226784] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
    [ 0.226794] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
    [ 0.226836] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
    [ 0.226851] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
    [ 0.226919] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
    [ 0.226933] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
    [ 0.227002] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
    [ 0.227016] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
    [ 0.227084] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
    [ 0.227099] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
    [ 0.227166] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
    [ 0.227181] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
    [ 0.227255] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
    [ 0.227275] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
    [ 0.227351] pci 0000:00:13.5: supports D1 D2
    [ 0.227352] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
    [ 0.227357] pci 0000:00:13.5: PME# disabled
    [ 0.227379] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [ 0.227402] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
    [ 0.227483] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
    [ 0.227497] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
    [ 0.227507] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
    [ 0.227518] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
    [ 0.227528] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
    [ 0.227538] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
    [ 0.227577] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
    [ 0.227600] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
    [ 0.227663] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.227667] pci 0000:00:14.2: PME# disabled
    [ 0.227681] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
    [ 0.227759] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [ 0.227808] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
    [ 0.227823] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
    [ 0.227835] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
    [ 0.227848] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
    [ 0.227903] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
    [ 0.227914] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [ 0.227926] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.227937] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
    [ 0.227945] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
    [ 0.227953] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.233329] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.233396] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
    [ 0.233399] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.233404] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.233444] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
    [ 0.233462] pci 0000:02:00.0: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
    [ 0.233472] pci 0000:02:00.0: reg 18: [io 0xee00-0xeeff]
    [ 0.233505] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.233535] pci 0000:02:00.0: supports D1 D2
    [ 0.233537] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.233541] pci 0000:02:00.0: PME# disabled
    [ 0.239995] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.240062] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
    [ 0.240065] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.240069] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.240134] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
    [ 0.240203] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.240207] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.240212] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
    [ 0.240214] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.240217] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.240219] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.240221] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.240224] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
    [ 0.240236] pci_bus 0000:00: on NUMA node 0
    [ 0.240239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.240363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [ 0.240408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [ 0.240440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
    [ 0.240465] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.240531] Unable to assume _OSC PCIe control. Disabling ASPM
    [ 0.251996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.252665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.253351] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.254017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.254684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.255350] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.257059] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.257725] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.258446] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.258522] vgaarb: loaded
    [ 0.258678] PCI: Using ACPI for IRQ routing
    [ 0.258742] PCI: pci_cache_line_size set to 64 bytes
    [ 0.258749] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
    [ 0.258890] reserve RAM buffer: 000000000009f400 - 000000000009ffff
    [ 0.258893] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
    [ 0.259004] NetLabel: Initializing
    [ 0.259067] NetLabel: domain hash size = 128
    [ 0.259131] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.259205] NetLabel: unlabeled traffic allowed by default
    [ 0.259287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.259608] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [ 0.261015] Switching to clocksource hpet
    [ 0.261499] Switched to NOHz mode on CPU #0
    [ 0.261582] Switched to NOHz mode on CPU #1
    [ 0.266362] pnp: PnP ACPI init
    [ 0.266443] ACPI: bus type pnp registered
    [ 0.266593] pnp 00:00: [bus 00-ff]
    [ 0.266598] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.266600] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.266602] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.266604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.266606] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 0.266609] pnp 00:00: [mem 0x80000000-0xffffffff window]
    [ 0.266662] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.266792] pnp 00:01: [io 0x4100-0x411f]
    [ 0.266794] pnp 00:01: [io 0x0228-0x022f]
    [ 0.266796] pnp 00:01: [io 0x040b]
    [ 0.266798] pnp 00:01: [io 0x04d6]
    [ 0.266799] pnp 00:01: [io 0x0c00-0x0c01]
    [ 0.266801] pnp 00:01: [io 0x0c14]
    [ 0.266803] pnp 00:01: [io 0x0c50-0x0c52]
    [ 0.266805] pnp 00:01: [io 0x0c6c-0x0c6d]
    [ 0.266807] pnp 00:01: [io 0x0c6f]
    [ 0.266808] pnp 00:01: [io 0x0cd0-0x0cd1]
    [ 0.266810] pnp 00:01: [io 0x0cd2-0x0cd3]
    [ 0.266812] pnp 00:01: [io 0x0cd4-0x0cdf]
    [ 0.266814] pnp 00:01: [io 0x4000-0x40fe]
    [ 0.266815] pnp 00:01: [io 0x4210-0x4217]
    [ 0.266817] pnp 00:01: [io 0x0b10-0x0b1f]
    [ 0.266819] pnp 00:01: [mem 0x00000000-0x00000fff window]
    [ 0.266822] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
    [ 0.266828] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.266939] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [ 0.267023] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [ 0.267131] system 00:01: [io 0x4100-0x411f] has been reserved
    [ 0.267198] system 00:01: [io 0x0228-0x022f] has been reserved
    [ 0.267264] system 00:01: [io 0x040b] has been reserved
    [ 0.267330] system 00:01: [io 0x04d6] has been reserved
    [ 0.267395] system 00:01: [io 0x0c00-0x0c01] has been reserved
    [ 0.267461] system 00:01: [io 0x0c14] has been reserved
    [ 0.267530] system 00:01: [io 0x0c50-0x0c52] has been reserved
    [ 0.267596] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
    [ 0.267662] system 00:01: [io 0x0c6f] has been reserved
    [ 0.267727] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.267793] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.267859] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
    [ 0.267926] system 00:01: [io 0x4000-0x40fe] has been reserved
    [ 0.267992] system 00:01: [io 0x4210-0x4217] has been reserved
    [ 0.268058] system 00:01: [io 0x0b10-0x0b1f] has been reserved
    [ 0.268125] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
    [ 0.268201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.268290] pnp 00:02: [dma 4]
    [ 0.268291] pnp 00:02: [io 0x0000-0x000f]
    [ 0.268293] pnp 00:02: [io 0x0080-0x0090]
    [ 0.268295] pnp 00:02: [io 0x0094-0x009f]
    [ 0.268297] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.268326] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.268366] pnp 00:03: [irq 0 disabled]
    [ 0.268380] pnp 00:03: [irq 8]
    [ 0.268382] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.268408] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.268430] pnp 00:04: [io 0x0070-0x0073]
    [ 0.268456] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.268463] pnp 00:05: [io 0x0061]
    [ 0.268488] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.268495] pnp 00:06: [io 0x00f0-0x00ff]
    [ 0.268504] pnp 00:06: [irq 13]
    [ 0.268535] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.268566] pnp 00:07: [io 0x0010-0x001f]
    [ 0.268567] pnp 00:07: [io 0x0022-0x003f]
    [ 0.268569] pnp 00:07: [io 0x0044-0x005f]
    [ 0.268571] pnp 00:07: [io 0x0062-0x0063]
    [ 0.268573] pnp 00:07: [io 0x0065-0x006f]
    [ 0.268575] pnp 00:07: [io 0x0074-0x007f]
    [ 0.268576] pnp 00:07: [io 0x0091-0x0093]
    [ 0.268578] pnp 00:07: [io 0x00a2-0x00bf]
    [ 0.268580] pnp 00:07: [io 0x00e0-0x00ef]
    [ 0.268582] pnp 00:07: [io 0x04d0-0x04d1]
    [ 0.268632] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 0.268699] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.269033] pnp 00:08: [io 0x0060]
    [ 0.269034] pnp 00:08: [io 0x0064]
    [ 0.269043] pnp 00:08: [irq 1]
    [ 0.269080] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.269127] pnp 00:09: [mem 0x000f0000-0x000fffff]
    [ 0.269129] pnp 00:09: [mem 0x00000000-0x001fffff]
    [ 0.269131] pnp 00:09: [mem 0xfed00000-0xfed000ff]
    [ 0.269132] pnp 00:09: [mem 0x7fff0000-0x7fffffff]
    [ 0.269134] pnp 00:09: [mem 0xffff0000-0xffffffff]
    [ 0.269136] pnp 00:09: [mem 0x00000000-0x0009ffff]
    [ 0.269138] pnp 00:09: [mem 0x00100000-0x7ffeffff]
    [ 0.269140] pnp 00:09: [mem 0xfec00000-0xfec00fff]
    [ 0.269142] pnp 00:09: [mem 0xfee00000-0xfee00fff]
    [ 0.269144] pnp 00:09: [mem 0xfff80000-0xfffeffff]
    [ 0.269148] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269229] pnp 00:09: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269309] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269390] pnp 00:09: disabling [mem 0x00100000-0x7ffeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269519] system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
    [ 0.269587] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved
    [ 0.269654] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.269721] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.269788] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
    [ 0.269855] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
    [ 0.269922] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.269930] pnp: PnP ACPI: found 10 devices
    [ 0.269994] ACPI: ACPI bus type pnp unregistered
    [ 0.306168] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
    [ 0.306245] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.306311] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
    [ 0.306378] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.306445] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.306523] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
    [ 0.306598] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.306664] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
    [ 0.306741] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.306809] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.306886] pci 0000:00:14.4: PCI bridge to [bus 03-03]
    [ 0.306952] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.307022] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.307090] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
    [ 0.307175] pci 0000:00:02.0: setting latency timer to 64
    [ 0.307180] pci 0000:00:0a.0: setting latency timer to 64
    [ 0.307188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.307190] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.307192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.307194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.307197] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.307199] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 0.307201] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
    [ 0.307203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.307206] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.307208] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
    [ 0.307210] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.307213] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
    [ 0.307215] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
    [ 0.307217] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
    [ 0.307219] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [ 0.307222] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [ 0.307224] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.307226] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.307228] pci_bus 0000:03: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.307274] NET: Registered protocol family 2
    [ 0.307398] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.307694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.308325] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.308652] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.308719] TCP reno registered
    [ 0.308783] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.308856] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.309050] NET: Registered protocol family 1
    [ 0.426742] pci 0000:01:00.0: Boot video device
    [ 0.426749] PCI: CLS 64 bytes, default 64
    [ 0.426800] Unpacking initramfs...
    [ 0.460291] Freeing initrd memory: 2140k freed
    [ 0.461639] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    [ 0.461707] apm: disabled - APM is not SMP safe.
    [ 0.461884] audit: initializing netlink socket (disabled)
    [ 0.461957] type=2000 audit(1312207987.459:1): initialized
    [ 0.462290] highmem bounce pool size: 64 pages
    [ 0.462357] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.464180] VFS: Disk quotas dquot_6.5.2
    [ 0.464312] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.464469] msgmni has been set to 1712
    [ 0.464730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.464841] io scheduler noop registered
    [ 0.464907] io scheduler deadline registered
    [ 0.464983] io scheduler cfq registered (default)
    [ 0.465152] pcieport 0000:00:02.0: setting latency timer to 64
    [ 0.465180] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 0.465225] pcieport 0000:00:0a.0: setting latency timer to 64
    [ 0.465246] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
    [ 0.465393] ERST: Table is not found!
    [ 0.465467] isapnp: Scanning for PnP cards...
    [ 0.822554] isapnp: No Plug & Play device found
    [ 0.822675] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.050031] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 1.050099] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 1.050669] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.050792] mousedev: PS/2 mouse device common for all mice
    [ 1.050892] rtc_cmos 00:04: RTC can wake from S4
    [ 1.074526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.076767] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 1.076869] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 1.076954] cpuidle: using governor ladder
    [ 1.077018] cpuidle: using governor menu
    [ 1.077281] TCP cubic registered
    [ 1.077345] NET: Registered protocol family 17
    [ 1.077415] Registering the dns_resolver key type
    [ 1.077492] Using IPI No-Shortcut mode
    [ 1.077626] PM: Hibernation image not present or could not be loaded.
    [ 1.077633] registered taskstats version 1
    [ 1.077987] rtc_cmos 00:04: setting system clock to 2011-08-01 14:13:08 UTC (1312207988)
    [ 1.078086] Initializing network drop monitor service
    [ 1.078222] Freeing unused kernel memory: 512k freed
    [ 1.078587] Write protecting the kernel text: 3380k
    [ 1.078672] Write protecting the kernel read-only data: 1028k
    [ 1.088713] udevd[47]: starting version 171
    [ 1.180160] SCSI subsystem initialized
    [ 1.197209] usbcore: registered new interface driver usbfs
    [ 1.197412] usbcore: registered new interface driver hub
    [ 1.197625] usbcore: registered new device driver usb
    [ 1.215729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.215840] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 1.215930] ehci_hcd 0000:00:13.5: EHCI Host Controller
    [ 1.216028] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
    [ 1.226748] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
    [ 1.226842] ehci_hcd 0000:00:13.5: debug port 1
    [ 1.226937] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
    [ 1.237087] libata version 3.00 loaded.
    [ 1.240040] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
    [ 1.240292] hub 1-0:1.0: USB hub found
    [ 1.240359] hub 1-0:1.0: 10 ports detected
    [ 1.240733] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.241613] scsi0 : pata_atiixp
    [ 1.241804] scsi1 : pata_atiixp
    [ 1.242405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
    [ 1.242472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
    [ 1.244130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.244228] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.244315] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 1.244390] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
    [ 1.250091] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
    [ 1.307508] hub 2-0:1.0: USB hub found
    [ 1.307579] hub 2-0:1.0: 2 ports detected
    [ 1.307730] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.307813] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [ 1.307889] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
    [ 1.326729] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
    [ 1.384201] hub 3-0:1.0: USB hub found
    [ 1.384274] hub 3-0:1.0: 2 ports detected
    [ 1.384428] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.384511] ohci_hcd 0000:00:13.2: OHCI Host Controller
    [ 1.384583] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
    [ 1.405209] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
    [ 1.460849] hub 4-0:1.0: USB hub found
    [ 1.460923] hub 4-0:1.0: 2 ports detected
    [ 1.461068] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.461149] ohci_hcd 0000:00:13.3: OHCI Host Controller
    [ 1.461220] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
    [ 1.480027] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
    [ 1.537463] hub 5-0:1.0: USB hub found
    [ 1.537533] hub 5-0:1.0: 2 ports detected
    [ 1.537661] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.537735] ohci_hcd 0000:00:13.4: OHCI Host Controller
    [ 1.537805] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
    [ 1.553363] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
    [ 1.610820] hub 6-0:1.0: USB hub found
    [ 1.610890] hub 6-0:1.0: 2 ports detected
    [ 1.611025] ahci 0000:00:12.0: version 3.0
    [ 1.611043] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 1.611127] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
    [ 1.611295] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 1.611377] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
    [ 1.612922] scsi2 : ahci
    [ 1.613831] scsi3 : ahci
    [ 1.614815] scsi4 : ahci
    [ 1.614997] scsi5 : ahci
    [ 1.615170] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
    [ 1.615247] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
    [ 1.615324] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
    [ 1.615400] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
    [ 1.933384] ata6: SATA link down (SStatus 0 SControl 300)
    [ 1.933527] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.063354] usb 6-2: new low speed USB device number 2 using ohci_hcd
    [ 2.106684] ata3: softreset failed (device not ready)
    [ 2.106751] ata3: applying SB600 PMP SRST workaround and retrying
    [ 2.106831] ata4: softreset failed (device not ready)
    [ 2.106897] ata4: applying SB600 PMP SRST workaround and retrying
    [ 2.273373] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.273477] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.275971] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
    [ 2.276040] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.278897] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
    [ 2.278963] ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 2.279030] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.279635] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.279701] ata4.00: configured for UDMA/100
    [ 2.284467] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.284533] ata3.00: configured for UDMA/133
    [ 2.284747] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
    [ 2.397145] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
    [ 2.407639] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    [ 2.407755] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.407821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.407838] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.411375] input: Primax Electronics Wireless Mouse as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1
    [ 2.411568] generic-usb 0003:0461:4D25.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Primax Electronics Wireless Mouse] on usb-0000:00:13.4-2/input0
    [ 2.411669] usbcore: registered new interface driver usbhid
    [ 2.411745] usbhid: USB HID core driver
    [ 2.437927] sda: sda1 sda2 sda3 < sda5 >
    [ 2.438378] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.518436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.518516] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.518787] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 2.959493] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.003984] udevd[255]: starting version 171
    [ 4.140765] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 4.140858] ACPI: Power Button [PWRB]
    [ 4.140981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.141058] ACPI: Power Button [PWRF]
    [ 4.154881] Linux agpgart interface v0.103
    [ 4.157785] ACPI: Fan [FAN] (on)
    [ 4.158635] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [ 4.161972] ACPI: acpi_idle registered with cpuidle
    [ 4.162457] SP5100 TCO timer: mmio address 0xfec000f0 already in use
    [ 4.228336] sky2: driver version 1.28
    [ 4.228452] sky2 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 4.228527] sky2 0000:02:00.0: setting latency timer to 64
    [ 4.228555] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
    [ 4.228709] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
    [ 4.228991] sky2 0000:02:00.0: eth0: addr 00:50:8d:ba:48:da
    [ 4.232113] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 4.250935] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    [ 4.302867] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    [ 4.356767] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20110316/nspredef-1059)
    [ 4.356967] ACPI: Expecting a [Reference] package element, found type 0
    [ 4.357033] ACPI: Invalid passive threshold
    [ 4.363965] sd 2:0:0:0: Attached scsi generic sg0 type 0
    [ 4.364111] sr 3:0:0:0: Attached scsi generic sg1 type 5
    [ 4.476288] nvidia: module license 'NVIDIA' taints kernel.
    [ 4.476360] Disabling lock debugging due to kernel taint
    [ 4.556743] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.556813] ACPI: Thermal Zone [THRM] (44 C)
    [ 4.691172] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4.775620] hda_codec: ALC888: BIOS auto-probing.
    [ 4.777062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
    [ 4.781547] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
    [ 5.638691] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 5.638769] nvidia 0000:01:00.0: setting latency timer to 64
    [ 5.638774] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 5.639105] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.21 Mon Jul 18 14:37:03 PDT 2011
    [ 5.886530] EXT4-fs (sda5): re-mounted. Opts: (null)
    [ 5.965890] Adding 996024k swap on /dev/sda2. Priority:-1 extents:1 across:996024k
    Last edited by Fuentes (2011-08-16 22:44:13)

    the contents of /home/user/.xsession-errors
    startkde: Starting up...
    Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    kbuildsycoca4 running...
    kded(920) LayoutMemoryPersister::restoreFromFile: Failed to open layout memory xml file for reading "/home/alvaro/.kde4/share/apps/kded/session/keyboard/layout_memory.xml" error: 5
    kded(920)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
    No outputs have backlight property
    QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
    kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    Object::connect: No such signal QDBusAbstractInterface::Changed()
    Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    QDBusObjectPath: invalid path ""
    QDBusObjectPath: invalid path ""
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00141
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0x8bf31cc
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00141
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00143
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00143
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00145
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00145
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00147
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00147
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00149
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00149
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e0014b
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e0014b
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e0014d
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e0014d
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e0014f
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e0014f
    Object::connect: No such signal QDBusAbstractInterface::Changed()
    Object::connect: No such signal KWindowSystem::windowChanged(WId,unsigned long*)
    kwin(977): Compositing is not possible
    kwin(977): Compositing is not possible
    kwin(977): Compositing is not possible
    kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
    kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
    QProcess: Destroyed while process is still running.
    plasma-desktop(1001): Communication problem with "plasma-desktop" , it probably crashed.
    Error message was: "org.freedesktop.DBus.Error.Disconnected" : " "Connection was disconnected before a reply was received" "
    kdeinit4: Fatal IO error: client killed
    kdeinit4: sending SIGHUP to children.
    klauncher: Exiting on signal 1
    kglobalaccel: Fatal IO error: client killed
    kdeinit4: Fatal IO error: client killed
    kdeinit4: sending SIGHUP to children.
    ksmserver: Fatal IO error: client killed
    kdeinit4: sending SIGTERM to children.
    kdeinit4: Exit.
    kded4: Fatal IO error: client killed
    kdeinit4: sending SIGTERM to children.
    kdeinit4: Exit.

  • Help? optimus/bumblebee force shutoff

    Hi @ everybody,
    I've installed Arch (3.10.3-1-ARCH) on my new Vaio SVS13A2 notebook. Works like a charm, except of the graphics switching thing...
    I've installed the intel+intel-dri and nvidia driver, bumblebee, bbswitch, as well as primus.
    So first of all I check if bumblebee deamon is running and then turn the craphics on:
    # systemctl | grep bumblebee
    bumblebeed.service loaded active running Bumblebee C Daemon
    # tee /proc/acpi/bbswitch <<<ON
    ON
    # cat /proc/acpi/bbswitch
    0000:01:00.0 ON
    # lspci | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
    01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 640M LE] (rev a1)[/ins]
    #modprobe nvidia
    dmesg | grep -C 10 bbswitch:
    [ 2.361897] iTCO_vendor_support: vendor-support=0
    [ 2.363428] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 2.363486] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.363612] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.393956] systemd-udevd[156]: renamed network interface eth0 to enp4s0
    [ 2.417337] systemd-udevd[165]: renamed network interface wlan0 to wlp2s0
    [ 2.420532] [drm] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6
    [ 2.435022] fbcon: inteldrmfb (fb0) is primary device
    [ 2.450563] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 2.457345] iwlwifi 0000:02:00.0: Radio type=0x2-0x1-0x0
    [ 2.476037] bbswitch: version 0.7
    [ 2.476040] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
    [ 2.476042] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
    [ 2.476090] bbswitch: detected an Optimus _DSM function
    [ 2.476098] pci 0000:01:00.0: enabling device (0006 -> 0007)
    [ 2.476123] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
    [ 2.477101] bbswitch: disabling discrete graphics
    [ 2.491352] pci 0000:01:00.0: power state changed by ACPI to D3cold
    [ 147.364282] bbswitch: enabling discrete graphics
    [ 147.573363] pci 0000:01:00.0: power state changed by ACPI to D0
    [ 283.321906] nvidia: module license 'NVIDIA' taints kernel.
    [ 283.321910] Disabling lock debugging due to kernel taint
    [ 283.326888] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [ 283.327030] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
    [ 283.327035] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 325.15 Wed Jul 31 18:50:56 PDT 2013
    If I type:
    # optirun -vv glxgears
    or
    #primusrun glxgears
    then the notebook just goes instant off, like i pulled the battery. Can't be healthy... Please help.
    glxgears is working normally without optirun/primusrun.
    This is what optirun displays, before the whole system just shutoff:
    #optirun -vv glxgears
    [ 51.955411] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
    [ 51.955626] [INFO]Configured driver: nvidia
    [ 51.955738] [DEBUG]optirun version 3.2.1 starting...
    [ 51.955746] [DEBUG]Active configuration:
    [ 51.955750] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
    [ 51.955753] [DEBUG] X display: :8
    [ 51.955764] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
    [ 51.955767] [DEBUG] Socket path: /var/run/bumblebee.socket
    [ 51.955769] [DEBUG] Accel/display bridge: primus
    [ 51.955780] [DEBUG] VGL Compression: proxy
    [ 51.955783] [DEBUG] VGLrun extra options:
    [ 51.955787] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
    here are my configs:
    bumblebee.conf
    [bumblebeed]
    VirtualDisplay=:8
    KeepUnusedXServer=false
    ServerGroup=bumblebee
    TurnCardOffAtExit=false
    NoEcoModeOverride=false
    Driver=nvidia
    XorgConfDir=/etc/bumblebee/xorg.conf.d
    [optirun]
    Bridge=primus
    VGLTransport=proxy
    PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
    AllowFallbackToIGC=false
    [driver-nvidia]
    KernelDriver=nvidia
    PMMethod=auto
    LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
    XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    xorg.conf.nvidia:
    Section "ServerLayout"
    Identifier "Layout0"
    Option "AutoAddDevices" "false"
    Option "AutoAddGPU" "false"
    EndSection
    Section "Device"
    Identifier "DiscreteNvidia"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    Option "ProbeAllGpus" "false"
    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
    EndSection
    Hope there is no information missing.
    Thanks in advance for your help.
    Martin
    Last edited by martin155 (2013-08-08 12:41:44)

    Yeah, you're right. Should have read the comment above PMMethod. I've now read the rest of the config at least
    Lekensteyn wrote:Can you try to isolate the faulty component? It seems that bbswitch+nvidia = power off, but what about using Driver=nouveau?
    What if you manually (with bumblebeed disabled) run (after a reboot without bumblebeed running nor nvidia loaded):
    every command you wrote works like a charm:
    # modprobe -v bbswitch
    insmod /lib/modules/3.10.3-1-ARCH/extramodules/bbswitch.ko.gz
    # tee /proc/acpi/bbswitch <<<OFF
    OFF
    # tee /proc/acpi/bbswitch <<<ON
    ON
    # cat /proc/acpi/bbswitch
    0000:01:00.0 ON
    # modprobe -v nvidia
    insmod /lib/modules/3.10.3-1-ARCH/extramodules/nvidia.ko.gz
    # modprobe -v -r nvidia
    rmmod nvidia
    # tee /proc/acpi/bbswitch <<<OFF
    OFF
    # cat /proc/acpi/bbswitch
    0000:01:00.0 OFF
    Turning the card on/off and loading nvidia kernel module via modprobe works.
    There seems to be sth wrong with bumblebee?! I reinstalled everything several times / deleted config etc, before I opened this thread.
    Oh, you're right Lekenstyn: I forgot to mention that it's the same with nouveau.
    So there has to be sth wrong with bumblebee, right?
    But what? I'm totally new to Linux-Optimus.
    €dit: I'm not totally new to Arch, but why the heck is journalctl only outputting logs upto 2nd Aug? strange...
    Well, this has to wait a sec, gotta go to the grocery
    Last edited by martin155 (2013-08-08 17:04:48)

  • Linked Server in different version of ODBC driver

    I have a ODBC 2.0 driver for a proprietary database. When I changed the driver to 3.0, I receive -
    Msg 7355, Level 16, State 1, Line 1
    The OLE DB provider "MSDASQL" for linked server "DG" supplied inconsistent metadata for a column. The name was changed at execution time.
    DG4ODBC from Oracle works fine with the driver so is the ODBC tool that Microsoft provides.

    Hi,
    Odbc32.dll - ODBC Driver Manager
    Odbc32gt.dll - ODBC Driver Generic Thunking
    Odbcad32.exe - ODBC Administrator
    Odbcconf.dll - ODBC Driver Configuration Program
    Odbcconf.exe - ODBC Driver Configuration Program
    Odbcconf.rsp - ODBC Driver Configuration File
    Odbccp32.cpl - ODBC Control Panel
    Odbccp32.dll - ODBC Installer
    Odbccr32.dll - ODBC Cursor Library
    Odbccu32.dll - ODBC Cursor Library
    Odbcint.dll - ODBC Resources
    the above libraries are supporting...
    Please go through this link "http://support.microsoft.com/kb/313008/en-us"
    This posting is provided &amp;quot;AS IS&amp;quot; with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing! http://sesaitech.blogspot.in/

  • Problem with radeon driver and Xorg

    Hoping someone can help with this problem.
    I would like to try and use the open source ati driver over the proprietary fglrx driver, however when I use this driver and I try to test my Xorg configuration it enters into X without any problems (mouse cursor appears and is functional) but when I Ctrl+Alt+Backspace to exit back to the console my screen resolution is completely distorted so that I can't read anything.  I can enter commands and can only use a reboot command to get it functional again.  I do not have this problem with the fglrx driver.
    I have a Dell Inspiron E1505 laptop with an ATI Mobility X1400 graphics card.
    Here is my xorg.conf if it helps:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "GLcore"
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "record"
    Load "xtrap"
    Load "freetype"
    Load "drm"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    HorizSync 30.0 - 130.0
    VertRefresh 50.0 - 100.0
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "Dac6Bit" # [<bool>]
    #Option "Dac8Bit" # [<bool>]
    #Option "BusType" # [<str>]
    #Option "CPPIOMode" # [<bool>]
    #Option "CPusecTimeout" # <i>
    #Option "AGPMode" # <i>
    #Option "AGPFastWrite" # [<bool>]
    #Option "AGPSize" # <i>
    #Option "GARTSize" # <i>
    #Option "RingSize" # <i>
    #Option "BufferSize" # <i>
    #Option "EnableDepthMoves" # [<bool>]
    #Option "EnablePageFlip" # [<bool>]
    #Option "NoBackBuffer" # [<bool>]
    #Option "DMAForXv" # [<bool>]
    #Option "FBTexPercent" # <i>
    #Option "DepthBits" # <i>
    #Option "PCIAPERSize" # <i>
    #Option "AccelDFS" # [<bool>]
    #Option "DDCMode" # [<bool>]
    #Option "IgnoreEDID" # [<bool>]
    #Option "DisplayPriority" # [<str>]
    #Option "PanelSize" # [<str>]
    #Option "ForceMinDotClock" # <freq>
    #Option "ColorTiling" # [<bool>]
    #Option "VideoKey" # <i>
    #Option "RageTheatreCrystal" # <i>
    #Option "RageTheatreTunerPort" # <i>
    #Option "RageTheatreCompositePort" # <i>
    #Option "RageTheatreSVideoPort" # <i>
    #Option "TunerType" # <i>
    #Option "RageTheatreMicrocPath" # <str>
    #Option "RageTheatreMicrocType" # <str>
    #Option "ScalerWidth" # <i>
    #Option "RenderAccel" # [<bool>]
    #Option "SubPixelOrder" # [<str>]
    #Option "ShowCache" # [<bool>]
    #Option "DynamicClocks" # [<bool>]
    #Option "VGAAccess" # [<bool>]
    #Option "ReverseDDC" # [<bool>]
    #Option "LVDSProbePLL" # [<bool>]
    #Option "AccelMethod" # <str>
    #Option "DRI" # [<bool>]
    #Option "ConnectorTable" # <str>
    #Option "DefaultConnectorTable" # [<bool>]
    #Option "DefaultTMDSPLL" # [<bool>]
    #Option "TVDACLoadDetect" # [<bool>]
    #Option "ForceTVOut" # [<bool>]
    #Option "TVStandard" # <str>
    #Option "IgnoreLidStatus" # [<bool>]
    Identifier "Card0"
    Driver "radeon"
    VendorName "ATI Technologies Inc"
    BoardName "Radeon Mobility X1400"
    BusID "PCI:1:0:0"
    Option "XAANoOffscreenPixmaps" "true"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1680x1050" "1440x900" "1280x800" "1024x768"
    EndSubSection
    EndSection
    Section "DRI"
    Group "video"
    Mode 0666
    EndSection

    It is very possible to have direct rendering on YOUR card (r5xx) with the radeon(ati) driver, but you need a lot of packages that are still in testing, and it is a somewhat daunting task to sort through everything.
    Most importantly, you need x-server 1.5 and mesa 7.1+
    The packages that you need & are newer than core/extra are (all can be had from testing, except libgl):
    mesa >= 7.1
    xf86-input-evdev 2.0.4
    xf86-video-ati >= 6.9.0
    xorg-server >= 1.4.99.906
    libgl >= 7.1  ** has to be built from a with ABS/pkgbuild, because you need to add r300 & radeon dri-drivers in the configure **
    I have an x1650 (rv535) and have been running the radeon driver WITH direct rendering since JULY, and the performance is very good. I can run compiz without skipping a beat (while playing WOP), 2800FPS on glxgears, and ** play video WITHOUT TEARING **!!
    Please read a lot of what's going on in this forum:
    http://www.phoronix.com/forums/forumdisplay.php?f=43 (open source ati/amd)
    I hope this gives you some hope that it can be done.
    Fight the good fight FOSS for ALL!
    BTW, the radeon(ati) driver is better than radeonhd for our cards!!!
    Last edited by Execute_Method (2008-11-19 00:19:30)

  • ATI Contrast Control - Open Source ATI Driver

    Using the open source xf86-video-ati driver, is there an easy way to change the screen contrast?
    I recently switched from Ubuntu to Arch. On Ubuntu I had used the ATI proprietary driver "Catalyst". The default settings for the computer were really a strain on the eyes. However, using the Catalyst GUI to change the brightness and contrast I could get it to a nice setting. I would much prefer an open source driver to a proprietary one and even the Arch Wiki states that support for the proprietary driver has been dropped due to "dissatisfaction with the quality and speed of development". I can resort to this driver if I need to, but I'd rather not.
    I've been able to get some level of brightness control by changing the /sys/class/backlight/acpi_video0/brightness, but this only gives me so much control because the value goes from 0 to 8. However, this would probably be acceptable if I could also find a way to control the contrast of the screen. Using this driver is there anyway to easily do this?
    Thank you for your time!

    Edit: Ah... I'm guessing you're using a laptop.
    Last edited by Earnestly (2012-02-13 00:56:14)

  • Using encrypted external drive

    I'm moving from Windows7 to a MacBook Pro. All of my music, etc., has been stored on an external hard drive that my company forced me to encrypt using Microsoft BitLocker. When I attach the drive to the Mac, I get the message that the drive is not readable. I've been unsuccessful in decrypting the drive. (I think I may need administrative rights to do that.) Is there any solution to my current situation ... before I return to an office next week? I definitely don't want to erase the contents of the drive.

    Bitlocker is proprietary Microsoft technology and it is only available for Windows. In order to access the drive, you need to unencrypted it with Windows using the correct key. Alternatively, if you do not have privilege enough to unencrypted the drive but can read it, you could read all your files off the drive to another location, such as another unencrypted external disk. All this requires a version of Windows with BitLocker installed and the corrected cryptographic key.

  • What is the difference between a Serial ATA 3 TB Drive and 3 TB Fusion Drive

    What is the difference between a Serial ATA @ 7200 rpm 3 TB Drive and 3 TB Fusion Drive

    A Fusion Drive is a proprietary combination of a hard drive and a solid state drive (SSD) engineered to dynamically move data you use most onto the fast SSD - so it's a lot faster than the equivalent hard drive, but much cheaper than a pure SSD storage solution would be.
    Matt

  • Can I import a movie from a DVR and save to hard drive on computer with Premiere Elements?

    Changing providers and want to salvage recordings from old DVR. 
    Also, If I can salvage the recordings, can I copy back to a new DVR?
    I've got Premiere Elements 9 and haven't used in a long time.

    Probably not... most DVR makers code to the hard drive in a proprietary format that will not work in any other DVR
    You may be able to PLAY the video out to an external recording device, such as a VCR or a DVD recorder
    Or, for a computer, you may be able to use a converter such as at http://www.grassvalley.com/products/converters

  • USB DisplayLink Second Monitor

    I have a ThinkVision USB Monitor that I've been trying to use with a Thinkpad T420 for quite some time.
    My first attempt was with the udlfb module and xf86-video-fbdev on the linux-lts kernel. Wasn't so hot. I then attempted to use xf86-video-fbdev-for-displaylink, which is a replacement for the X fbdev driver. That package installs the drivers to the wrong directory, however, so I had to fix that first.
    I can't remember if I got it working on the LTS kernel or not, but either way, I switched back to linux to see if the 3.9 kernel might have a fix.
    The initial boot wasn't too pleasing.
    Turned out the monitor was hijacking my framebuffer at boot time, and it would display all the console text itself. Wasn't pretty. I encountered the scheduling while atomic bug, which is apparently in need of some kernel patching to fix. I'd take the leap, but it doesn't even seem worth it until I can get X to use the display properly.
    I got a single X display working, mostly in accordance with the DisplayLink Wiki page. That was cool, but I'd have to run a separate X session. Xinerama, TwinView (I was on nVidia), were not an option. Here's the Xorg.log from the DisplayLink-only setup:
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    [ 8138.751] X Protocol Version 11, Revision 0
    [ 8138.752] Build Operating System: Linux 3.8.7-1-ARCH x86_64
    [ 8138.752] Current Operating System: Linux beefmaster 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
    [ 8138.752] Kernel command line: root=/dev/sda8 rw acpi_backlight=vendor acpi_osi=Linux
    [ 8138.754] Build Date: 17 April 2013 02:37:06PM
    [ 8138.754]
    [ 8138.755] Current version of pixman: 0.30.0
    [ 8138.756] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 8138.756] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 8138.759] (==) Log file: "/var/log/Xorg.1.log", Time: Sat Jun 1 17:19:00 2013
    [ 8138.759] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 8138.760] (==) ServerLayout "X.org Configured"
    [ 8138.760] (**) |-->Screen "ThinkVision" (0)
    [ 8138.760] (**) | |-->Monitor "ThinkVisionMonitor"
    [ 8138.760] (**) | |-->Device "ThinkVisionDevice"
    [ 8138.760] (==) Automatically adding devices
    [ 8138.760] (==) Automatically enabling devices
    [ 8138.760] (==) Automatically adding GPU devices
    [ 8138.760] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 8138.760] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 8138.760] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 8138.760] (II) Loader magic: 0x7fcc20
    [ 8138.760] (II) Module ABI versions:
    [ 8138.760] X.Org ANSI C Emulation: 0.4
    [ 8138.760] X.Org Video Driver: 14.1
    [ 8138.760] X.Org XInput driver : 19.1
    [ 8138.760] X.Org Server Extension : 7.0
    [ 8138.760] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 8138.761] (--) PCI:*(0:1:0:0) 10de:1057:17aa:21ce rev 161, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
    [ 8138.761] Initializing built-in extension Generic Event Extension
    [ 8138.762] Initializing built-in extension SHAPE
    [ 8138.763] Initializing built-in extension MIT-SHM
    [ 8138.763] Initializing built-in extension XInputExtension
    [ 8138.764] Initializing built-in extension XTEST
    [ 8138.765] Initializing built-in extension BIG-REQUESTS
    [ 8138.765] Initializing built-in extension SYNC
    [ 8138.766] Initializing built-in extension XKEYBOARD
    [ 8138.767] Initializing built-in extension XC-MISC
    [ 8138.767] Initializing built-in extension SECURITY
    [ 8138.768] Initializing built-in extension XINERAMA
    [ 8138.769] Initializing built-in extension XFIXES
    [ 8138.769] Initializing built-in extension RENDER
    [ 8138.770] Initializing built-in extension RANDR
    [ 8138.771] Initializing built-in extension COMPOSITE
    [ 8138.771] Initializing built-in extension DAMAGE
    [ 8138.772] Initializing built-in extension MIT-SCREEN-SAVER
    [ 8138.772] Initializing built-in extension DOUBLE-BUFFER
    [ 8138.773] Initializing built-in extension RECORD
    [ 8138.774] Initializing built-in extension DPMS
    [ 8138.774] Initializing built-in extension X-Resource
    [ 8138.775] Initializing built-in extension XVideo
    [ 8138.775] Initializing built-in extension XVideo-MotionCompensation
    [ 8138.776] Initializing built-in extension XFree86-VidModeExtension
    [ 8138.777] Initializing built-in extension XFree86-DGA
    [ 8138.777] Initializing built-in extension XFree86-DRI
    [ 8138.778] Initializing built-in extension DRI2
    [ 8138.778] (II) LoadModule: "glx"
    [ 8138.778] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 8138.778] (II) Module glx: vendor="X.Org Foundation"
    [ 8138.778] compiled for 1.14.1, module version = 1.0.0
    [ 8138.778] ABI class: X.Org Server Extension, version 7.0
    [ 8138.778] (==) AIGLX enabled
    [ 8138.778] Loading extension GLX
    [ 8138.778] (II) LoadModule: "fbdev"
    [ 8138.778] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 8138.778] (II) Module fbdev: vendor="X.Org Foundation"
    [ 8138.778] compiled for 1.14.1, module version = 0.4.3
    [ 8138.778] Module class: X.Org Video Driver
    [ 8138.778] ABI class: X.Org Video Driver, version 14.1
    [ 8138.778] (II) FBDEV: driver for framebuffer: fbdev
    [ 8138.778] (++) using VT number 2
    [ 8138.779] (WW) Falling back to old probe method for fbdev
    [ 8138.779] (II) Loading sub module "fbdevhw"
    [ 8138.779] (II) LoadModule: "fbdevhw"
    [ 8138.779] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 8138.779] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 8138.779] compiled for 1.14.1, module version = 0.0.2
    [ 8138.779] ABI class: X.Org Video Driver, version 14.1
    [ 8138.779] (II) FBDEV(0): using /dev/fb1
    [ 8138.779] (II) FBDEV(0): Creating default Display subsection in Screen section
    "ThinkVision" for depth/fbbpp 16/16
    [ 8138.779] (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
    [ 8138.779] (==) FBDEV(0): RGB weight 565
    [ 8138.779] (==) FBDEV(0): Default visual is TrueColor
    [ 8138.779] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 8138.779] (II) FBDEV(0): hardware: udlfb (video memory: 2052kB)
    [ 8138.779] (**) FBDEV(0): Option "fbdev" "/dev/fb1"
    [ 8138.779] (**) FBDEV(0): Option "ReportDamage" "True"
    [ 8138.779] (**) FBDEV(0): Damage reporting enabled. Disabling shadow framebuffer
    [ 8138.779] (II) FBDEV(0): checking modes against framebuffer device...
    [ 8138.779] (II) FBDEV(0): checking modes against monitor...
    [ 8138.779] (--) FBDEV(0): Virtual size is 1366x768 (pitch 1366)
    [ 8138.779] (**) FBDEV(0): Built-in mode "current": 72.0 MHz, 48.0 kHz, 60.0 Hz
    [ 8138.779] (II) FBDEV(0): Modeline "current"x0.0 72.00 1366 1380 1436 1500 768 769 772 800 +hsync +vsync -csync (48.0 kHz b)
    [ 8138.779] (==) FBDEV(0): DPI set to (96, 96)
    [ 8138.779] (II) Loading sub module "fb"
    [ 8138.779] (II) LoadModule: "fb"
    [ 8138.779] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 8138.779] (II) Module fb: vendor="X.Org Foundation"
    [ 8138.779] compiled for 1.14.1, module version = 1.0.0
    [ 8138.779] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 8138.779] (==) FBDEV(0): Backing store disabled
    [ 8138.779] (==) FBDEV(0): DPMS enabled
    [ 8138.779] (==) RandR enabled
    [ 8138.783] (II) AIGLX: Screen 0 is not DRI2 capable
    [ 8138.783] (II) AIGLX: Screen 0 is not DRI capable
    [ 8138.789] (II) AIGLX: Loaded and initialized swrast
    [ 8138.789] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 8138.817] (II) config/udev: Adding input device Power Button (/dev/input/event5)
    [ 8138.817] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 8138.817] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 8138.817] (II) LoadModule: "evdev"
    [ 8138.817] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 8138.817] (II) Module evdev: vendor="X.Org Foundation"
    [ 8138.817] compiled for 1.14.0, module version = 2.8.0
    [ 8138.817] Module class: X.Org XInput Driver
    [ 8138.817] ABI class: X.Org XInput driver, version 19.1
    [ 8138.817] (II) Using input driver 'evdev' for 'Power Button'
    [ 8138.817] (**) Power Button: always reports core events
    [ 8138.817] (**) evdev: Power Button: Device: "/dev/input/event5"
    [ 8138.817] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 8138.817] (--) evdev: Power Button: Found keys
    [ 8138.817] (II) evdev: Power Button: Configuring as keyboard
    [ 8138.817] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
    [ 8138.817] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 8138.817] (**) Option "xkb_rules" "evdev"
    [ 8138.817] (**) Option "xkb_model" "evdev"
    [ 8138.817] (**) Option "xkb_layout" "gb"
    [ 8138.817] (**) Option "xkb_options" "ctrl:nocaps"
    [ 8138.831] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
    [ 8138.831] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 8138.831] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 8138.831] (II) Using input driver 'evdev' for 'Video Bus'
    [ 8138.831] (**) Video Bus: always reports core events
    [ 8138.831] (**) evdev: Video Bus: Device: "/dev/input/event6"
    [ 8138.831] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 8138.831] (--) evdev: Video Bus: Found keys
    [ 8138.831] (II) evdev: Video Bus: Configuring as keyboard
    [ 8138.831] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input6/event6"
    [ 8138.831] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 8138.831] (**) Option "xkb_rules" "evdev"
    [ 8138.831] (**) Option "xkb_model" "evdev"
    [ 8138.831] (**) Option "xkb_layout" "gb"
    [ 8138.831] (**) Option "xkb_options" "ctrl:nocaps"
    [ 8138.831] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 8138.831] (II) No input driver specified, ignoring this device.
    [ 8138.831] (II) This device may have been added with another device file.
    [ 8138.831] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
    [ 8138.831] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 8138.831] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 8138.831] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 8138.831] (**) Sleep Button: always reports core events
    [ 8138.831] (**) evdev: Sleep Button: Device: "/dev/input/event4"
    [ 8138.831] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 8138.831] (--) evdev: Sleep Button: Found keys
    [ 8138.831] (II) evdev: Sleep Button: Configuring as keyboard
    [ 8138.831] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4"
    [ 8138.831] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 8138.831] (**) Option "xkb_rules" "evdev"
    [ 8138.831] (**) Option "xkb_model" "evdev"
    [ 8138.831] (**) Option "xkb_layout" "gb"
    [ 8138.831] (**) Option "xkb_options" "ctrl:nocaps"
    [ 8138.831] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 8138.832] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
    [ 8138.832] (II) No input driver specified, ignoring this device.
    [ 8138.832] (II) This device may have been added with another device file.
    [ 8138.832] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
    [ 8138.832] (II) No input driver specified, ignoring this device.
    [ 8138.832] (II) This device may have been added with another device file.
    [ 8138.832] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
    [ 8138.832] (II) No input driver specified, ignoring this device.
    [ 8138.832] (II) This device may have been added with another device file.
    [ 8138.832] (II) config/udev: Adding input device Integrated Camera (/dev/input/event16)
    [ 8138.832] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
    [ 8138.832] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
    [ 8138.832] (II) Using input driver 'evdev' for 'Integrated Camera'
    [ 8138.832] (**) Integrated Camera: always reports core events
    [ 8138.832] (**) evdev: Integrated Camera: Device: "/dev/input/event16"
    [ 8138.832] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb221
    [ 8138.832] (--) evdev: Integrated Camera: Found keys
    [ 8138.832] (II) evdev: Integrated Camera: Configuring as keyboard
    [ 8138.832] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input16/event16"
    [ 8138.832] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
    [ 8138.832] (**) Option "xkb_rules" "evdev"
    [ 8138.832] (**) Option "xkb_model" "evdev"
    [ 8138.832] (**) Option "xkb_layout" "gb"
    [ 8138.832] (**) Option "xkb_options" "ctrl:nocaps"
    [ 8138.832] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
    [ 8138.832] (II) No input driver specified, ignoring this device.
    [ 8138.832] (II) This device may have been added with another device file.
    [ 8138.833] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
    [ 8138.833] (II) No input driver specified, ignoring this device.
    [ 8138.833] (II) This device may have been added with another device file.
    [ 8138.833] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event11)
    [ 8138.833] (II) No input driver specified, ignoring this device.
    [ 8138.833] (II) This device may have been added with another device file.
    [ 8138.833] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event8)
    [ 8138.833] (II) No input driver specified, ignoring this device.
    [ 8138.833] (II) This device may have been added with another device file.
    [ 8138.833] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
    [ 8138.833] (II) No input driver specified, ignoring this device.
    [ 8138.833] (II) This device may have been added with another device file.
    [ 8138.833] (II) config/udev: Adding input device Logitech Gaming Mouse G400 (/dev/input/event2)
    [ 8138.833] (**) Logitech Gaming Mouse G400: Applying InputClass "evdev pointer catchall"
    [ 8138.833] (II) Using input driver 'evdev' for 'Logitech Gaming Mouse G400'
    [ 8138.833] (**) Logitech Gaming Mouse G400: always reports core events
    [ 8138.833] (**) evdev: Logitech Gaming Mouse G400: Device: "/dev/input/event2"
    [ 8138.833] (--) evdev: Logitech Gaming Mouse G400: Vendor 0x46d Product 0xc245
    [ 8138.833] (--) evdev: Logitech Gaming Mouse G400: Found 12 mouse buttons
    [ 8138.833] (--) evdev: Logitech Gaming Mouse G400: Found scroll wheel(s)
    [ 8138.833] (--) evdev: Logitech Gaming Mouse G400: Found relative axes
    [ 8138.833] (--) evdev: Logitech Gaming Mouse G400: Found x and y relative axes
    [ 8138.833] (II) evdev: Logitech Gaming Mouse G400: Configuring as mouse
    [ 8138.833] (II) evdev: Logitech Gaming Mouse G400: Adding scrollwheel support
    [ 8138.833] (**) evdev: Logitech Gaming Mouse G400: YAxisMapping: buttons 4 and 5
    [ 8138.833] (**) evdev: Logitech Gaming Mouse G400: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 8138.833] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2/event2"
    [ 8138.833] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G400" (type: MOUSE, id 10)
    [ 8138.833] (II) evdev: Logitech Gaming Mouse G400: initialized for relative axes.
    [ 8138.833] (**) Logitech Gaming Mouse G400: (accel) keeping acceleration scheme 1
    [ 8138.833] (**) Logitech Gaming Mouse G400: (accel) acceleration profile 0
    [ 8138.833] (**) Logitech Gaming Mouse G400: (accel) acceleration factor: 2.000
    [ 8138.833] (**) Logitech Gaming Mouse G400: (accel) acceleration threshold: 4
    [ 8138.834] (II) config/udev: Adding input device Logitech Gaming Mouse G400 (/dev/input/mouse0)
    [ 8138.834] (II) No input driver specified, ignoring this device.
    [ 8138.834] (II) This device may have been added with another device file.
    [ 8138.834] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 8138.834] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 8138.834] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 8138.834] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 8138.834] (**) AT Translated Set 2 keyboard: always reports core events
    [ 8138.834] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 8138.834] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 8138.834] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 8138.834] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 8138.834] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 8138.834] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 8138.834] (**) Option "xkb_rules" "evdev"
    [ 8138.834] (**) Option "xkb_model" "evdev"
    [ 8138.834] (**) Option "xkb_layout" "gb"
    [ 8138.834] (**) Option "xkb_options" "ctrl:nocaps"
    [ 8138.834] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
    [ 8138.834] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 8138.834] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "two finger scrolling"
    [ 8138.834] (II) LoadModule: "synaptics"
    [ 8138.834] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 8138.834] (II) Module synaptics: vendor="X.Org Foundation"
    [ 8138.834] compiled for 1.14.1, module version = 1.7.1
    [ 8138.834] Module class: X.Org XInput Driver
    [ 8138.834] ABI class: X.Org XInput driver, version 19.1
    [ 8138.834] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 8138.834] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 8138.834] (**) Option "Device" "/dev/input/event15"
    [ 8138.846] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 8138.846] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888 (res 75)
    [ 8138.846] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820 (res 105)
    [ 8138.846] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 8138.846] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 8138.846] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 8138.846] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 8138.846] (**) Option "EmulateTwoFingerMinZ" "40"
    [ 8138.846] (**) Option "EmulateTwoFingerMinW" "8"
    [ 8138.846] (**) Option "VertTwoFingerScroll" "on"
    [ 8138.846] (**) Option "HorizTwoFingerScroll" "on"
    [ 8138.846] (**) Option "TapButton1" "1"
    [ 8138.846] (**) Option "TapButton2" "2"
    [ 8138.846] (**) Option "TapButton3" "3"
    [ 8138.846] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 8138.846] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 8138.849] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event15"
    [ 8138.849] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
    [ 8138.849] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 8138.849] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 8138.849] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
    [ 8138.849] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 8138.849] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 8138.849] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 8138.849] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 8138.849] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 8138.849] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 8138.849] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 8138.849] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event17)
    [ 8138.849] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
    [ 8138.849] (**) TPPS/2 IBM TrackPoint: Applying InputClass "ThinkPad TrackPoint"
    [ 8138.849] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
    [ 8138.850] (**) TPPS/2 IBM TrackPoint: always reports core events
    [ 8138.850] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event17"
    [ 8138.850] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
    [ 8138.850] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    [ 8138.850] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
    [ 8138.850] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
    [ 8138.850] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
    [ 8138.850] (**) Option "EmulateWheel" "true"
    [ 8138.850] (**) Option "EmulateWheelButton" "2"
    [ 8138.850] (**) Option "YAxisMapping" "4 5"
    [ 8138.850] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    [ 8138.850] (**) Option "XAxisMapping" "6 7"
    [ 8138.850] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
    [ 8138.850] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 8138.850] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input17/event17"
    [ 8138.850] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
    [ 8138.850] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
    [ 8138.850] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    [ 8138.850] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
    [ 8138.850] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
    [ 8138.850] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
    [ 8138.850] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
    [ 8138.850] (II) No input driver specified, ignoring this device.
    [ 8138.850] (II) This device may have been added with another device file.
    [ 8138.850] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event1)
    [ 8138.850] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
    [ 8138.850] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
    [ 8138.850] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
    [ 8138.850] (**) ThinkPad Extra Buttons: always reports core events
    [ 8138.850] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event1"
    [ 8138.850] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
    [ 8138.850] (--) evdev: ThinkPad Extra Buttons: Found keys
    [ 8138.850] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
    [ 8138.850] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input1/event1"
    [ 8138.850] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
    [ 8138.850] (**) Option "xkb_rules" "evdev"
    [ 8138.850] (**) Option "xkb_model" "evdev"
    [ 8138.850] (**) Option "xkb_layout" "gb"
    [ 8138.850] (**) Option "xkb_options" "ctrl:nocaps"
    [ 8147.677] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 8181.528] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 8189.334] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 8593.711] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 8597.651] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 8604.061] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 13947.442] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 15638.705] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    I've since switched over to Nouveau, figuring I shouldn't at least taint my kernel if things might get to that level. This was nice, since KMS fixed the framebuffer hijack at boot and somewhere in the process solves the "Scheduling while atomic" bug. But it doesn't handle any better with the separate X displays thing.
    This is when I say ok, great, let's set it up with Xinerama or something. Xorg isn't having it.
    Here's my attempted dual-monitor xorg.conf, based on this forum thread:
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "DisplayLinkScreen"
    Screen 1 "ThinkpadScreen" LeftOf "DisplayLinkScreen"
    Option "Xinerama" "on"
    EndSection
    Section "Monitor"
    # 1600x900 @ 60.00 Hz (GTF) hsync: 55.92 kHz; pclk: 119.00 MHz
    Identifier "ThinkpadMonitor"
    VendorName "Unknown"
    ModelName "AU Optronics Corporation"
    HorizSync 36.5 - 54.7
    VertRefresh 40.0 - 60.0
    ModeLine "1600x900_60.00" 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync
    # Option "DPMS"
    EndSection
    Section "Device"
    Identifier "nvidiaCard"
    Driver "nouveau"
    VendorName "NVIDIA Corporation"
    BoardName "NVS 4200M"
    EndSection
    Section "Screen"
    Identifier "ThinkpadScreen"
    Device "nvidiaCard"
    Monitor "ThinkpadMonitor"
    DefaultDepth 16
    Option "Stereo" "0"
    Option "metamodes" "1600x900_60 +0+0"
    Option "FlatPanelProperties" "Scaling=Native"
    Option "RegistryDwords" "OGL_MaxFramesAllowed=0x0; EnableBrightnessControl=1; PerfLevelSrc=0x3333"
    Option "OnDemandVBlankInterrupts" "1"
    Option "TripleBuffer" "1"
    SubSection "Display"
    Depth 16
    EndSubSection
    EndSection
    ################ DisplayLink Stuff ###################
    Section "Device"
    Identifier "DisplayLinkDevice"
    Driver "fbdev"
    BusID "USB" # needed to use multiple DisplayLink devices
    Option "fbdev" "/dev/fb1" # change to whatever device you want to use
    # Option "rotate" "CCW" # uncomment for rotation
    EndSection
    Section "Monitor"
    Identifier "DisplayLinkMonitor"
    EndSection
    Section "Screen"
    Identifier "DisplayLinkScreen"
    Device "DisplayLinkDevice"
    Monitor "DisplayLinkMonitor"
    DefaultDepth 16
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    And here's the crash log:
    [ 3568.803]
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    [ 3568.805] X Protocol Version 11, Revision 0
    [ 3568.806] Build Operating System: Linux 3.8.7-1-ARCH x86_64
    [ 3568.807] Current Operating System: Linux beefmaster 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
    [ 3568.807] Kernel command line: root=/dev/sda8 rw acpi_backlight=vendor acpi_osi=Linux
    [ 3568.808] Build Date: 17 April 2013 02:37:06PM
    [ 3568.809]
    [ 3568.810] Current version of pixman: 0.30.0
    [ 3568.811] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 3568.811] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 3568.814] (==) Log file: "/var/log/Xorg.1.log", Time: Sat Jun 1 22:26:36 2013
    [ 3568.815] (==) Using config file: "/etc/X11/xorg.conf"
    [ 3568.816] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 3568.816] (==) ServerLayout "Layout0"
    [ 3568.816] (**) |-->Screen "DisplayLinkScreen" (0)
    [ 3568.816] (**) | |-->Monitor "DisplayLinkMonitor"
    [ 3568.816] (**) | |-->Device "DisplayLinkDevice"
    [ 3568.816] (**) |-->Screen "ThinkpadScreen" (1)
    [ 3568.816] (**) | |-->Monitor "<default monitor>"
    [ 3568.816] (==) No device specified for screen "ThinkpadScreen".
    Using the first device section listed.
    [ 3568.816] (**) | |-->Device "nvidiaCard"
    [ 3568.816] (==) No monitor specified for screen "ThinkpadScreen".
    Using a default monitor configuration.
    [ 3568.816] (**) Option "Xinerama" "on"
    [ 3568.816] (==) Automatically adding devices
    [ 3568.816] (==) Automatically enabling devices
    [ 3568.816] (==) Automatically adding GPU devices
    [ 3568.816] (**) Xinerama: enabled
    [ 3568.816] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 3568.816] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 3568.816] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 3568.816] (II) Loader magic: 0x7fcc20
    [ 3568.816] (II) Module ABI versions:
    [ 3568.816] X.Org ANSI C Emulation: 0.4
    [ 3568.816] X.Org Video Driver: 14.1
    [ 3568.816] X.Org XInput driver : 19.1
    [ 3568.816] X.Org Server Extension : 7.0
    [ 3568.816] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 3569.037] (--) PCI:*(0:1:0:0) 10de:1057:17aa:21ce rev 161, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
    [ 3569.037] Initializing built-in extension Generic Event Extension
    [ 3569.038] Initializing built-in extension SHAPE
    [ 3569.038] Initializing built-in extension MIT-SHM
    [ 3569.039] Initializing built-in extension XInputExtension
    [ 3569.040] Initializing built-in extension XTEST
    [ 3569.041] Initializing built-in extension BIG-REQUESTS
    [ 3569.041] Initializing built-in extension SYNC
    [ 3569.042] Initializing built-in extension XKEYBOARD
    [ 3569.043] Initializing built-in extension XC-MISC
    [ 3569.043] Initializing built-in extension SECURITY
    [ 3569.044] Initializing built-in extension XINERAMA
    [ 3569.045] Initializing built-in extension XFIXES
    [ 3569.045] Initializing built-in extension RENDER
    [ 3569.046] Initializing built-in extension RANDR
    [ 3569.047] Initializing built-in extension COMPOSITE
    [ 3569.047] Initializing built-in extension DAMAGE
    [ 3569.048] Initializing built-in extension MIT-SCREEN-SAVER
    [ 3569.049] Initializing built-in extension DOUBLE-BUFFER
    [ 3569.049] Initializing built-in extension RECORD
    [ 3569.050] Initializing built-in extension DPMS
    [ 3569.050] Initializing built-in extension X-Resource
    [ 3569.051] Initializing built-in extension XVideo
    [ 3569.052] Initializing built-in extension XVideo-MotionCompensation
    [ 3569.052] Initializing built-in extension XFree86-VidModeExtension
    [ 3569.053] Initializing built-in extension XFree86-DGA
    [ 3569.053] Initializing built-in extension XFree86-DRI
    [ 3569.054] Initializing built-in extension DRI2
    [ 3569.054] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 3569.054] (II) LoadModule: "glx"
    [ 3569.054] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 3569.054] (II) Module glx: vendor="X.Org Foundation"
    [ 3569.054] compiled for 1.14.1, module version = 1.0.0
    [ 3569.054] ABI class: X.Org Server Extension, version 7.0
    [ 3569.054] (==) AIGLX enabled
    [ 3569.054] Loading extension GLX
    [ 3569.054] (II) LoadModule: "fbdev"
    [ 3569.055] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 3569.055] (II) Module fbdev: vendor="X.Org Foundation"
    [ 3569.055] compiled for 1.14.1, module version = 0.4.3
    [ 3569.055] Module class: X.Org Video Driver
    [ 3569.055] ABI class: X.Org Video Driver, version 14.1
    [ 3569.055] (II) LoadModule: "nouveau"
    [ 3569.055] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 3569.055] (II) Module nouveau: vendor="X.Org Foundation"
    [ 3569.055] compiled for 1.14.0, module version = 1.0.7
    [ 3569.055] Module class: X.Org Video Driver
    [ 3569.055] ABI class: X.Org Video Driver, version 14.1
    [ 3569.055] (II) FBDEV: driver for framebuffer: fbdev
    [ 3569.055] (II) NOUVEAU driver
    [ 3569.055] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 3569.055] RIVA TNT (NV04)
    [ 3569.055] RIVA TNT2 (NV05)
    [ 3569.055] GeForce 256 (NV10)
    [ 3569.055] GeForce 2 (NV11, NV15)
    [ 3569.055] GeForce 4MX (NV17, NV18)
    [ 3569.055] GeForce 3 (NV20)
    [ 3569.055] GeForce 4Ti (NV25, NV28)
    [ 3569.055] GeForce FX (NV3x)
    [ 3569.055] GeForce 6 (NV4x)
    [ 3569.055] GeForce 7 (G7x)
    [ 3569.055] GeForce 8 (G8x)
    [ 3569.055] GeForce GTX 200 (NVA0)
    [ 3569.055] GeForce GTX 400 (NVC0)
    [ 3569.055] (++) using VT number 2
    [ 3569.055] (WW) Falling back to old probe method for fbdev
    [ 3569.055] (II) Loading sub module "fbdevhw"
    [ 3569.055] (II) LoadModule: "fbdevhw"
    [ 3569.055] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 3569.055] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 3569.055] compiled for 1.14.1, module version = 0.0.2
    [ 3569.055] ABI class: X.Org Video Driver, version 14.1
    [ 3569.055] (II) FBDEV(0): using /dev/fb1
    [ 3569.055] (II) [drm] nouveau interface version: 1.1.0
    [ 3569.056]
    Fatal server error:
    [ 3569.056] Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
    [ 3569.056]
    [ 3569.056] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 3569.056] (EE) Please also check the log file at "/var/log/Xorg.1.log" for additional information.
    [ 3569.056] (EE)
    [ 3569.058] Server terminated with error (1). Closing log file.
    It's asking for busIDs for framebuffer devices. This problem has been around as far back as 2010, as seen in the Libdlo mailing list. I've been using the fix described there. It doesn't work.
    I uninstall the custom xf86-video-fbdev from the AUR and install the standard Arch binary. Unlike the AUR version, it automatically places fbdev_drv.so in /usr/lib/xorg/modules/drivers as expected.
    Same problem. Here's the log, mostly the same as earlier:
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    [ 8754.488] X Protocol Version 11, Revision 0
    [ 8754.489] Build Operating System: Linux 3.8.7-1-ARCH x86_64
    [ 8754.490] Current Operating System: Linux beefmaster 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
    [ 8754.490] Kernel command line: root=/dev/sda8 rw acpi_backlight=vendor acpi_osi=Linux
    [ 8754.492] Build Date: 17 April 2013 02:37:06PM
    [ 8754.492]
    [ 8754.493] Current version of pixman: 0.30.0
    [ 8754.495] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 8754.495] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 8754.498] (==) Log file: "/var/log/Xorg.1.log", Time: Sat Jun 1 23:53:01 2013
    [ 8754.499] (==) Using config file: "/etc/X11/xorg.conf"
    [ 8754.499] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 8754.500] (==) ServerLayout "Layout0"
    [ 8754.500] (**) |-->Screen "DisplayLinkScreen" (0)
    [ 8754.500] (**) | |-->Monitor "DisplayLinkMonitor"
    [ 8754.500] (**) | |-->Device "DisplayLinkDevice"
    [ 8754.500] (**) |-->Screen "ThinkpadScreen" (1)
    [ 8754.500] (**) | |-->Monitor "ThinkpadMonitor"
    [ 8754.500] (**) | |-->Device "nvidiaCard"
    [ 8754.500] (**) Option "Xinerama" "on"
    [ 8754.500] (==) Automatically adding devices
    [ 8754.500] (==) Automatically enabling devices
    [ 8754.500] (==) Automatically adding GPU devices
    [ 8754.500] (**) Xinerama: enabled
    [ 8754.500] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 8754.500] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 8754.500] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 8754.500] (II) Loader magic: 0x7fcc20
    [ 8754.500] (II) Module ABI versions:
    [ 8754.500] X.Org ANSI C Emulation: 0.4
    [ 8754.500] X.Org Video Driver: 14.1
    [ 8754.500] X.Org XInput driver : 19.1
    [ 8754.500] X.Org Server Extension : 7.0
    [ 8754.500] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 8754.720] (--) PCI:*(0:1:0:0) 10de:1057:17aa:21ce rev 161, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
    [ 8754.720] Initializing built-in extension Generic Event Extension
    [ 8754.721] Initializing built-in extension SHAPE
    [ 8754.722] Initializing built-in extension MIT-SHM
    [ 8754.722] Initializing built-in extension XInputExtension
    [ 8754.723] Initializing built-in extension XTEST
    [ 8754.724] Initializing built-in extension BIG-REQUESTS
    [ 8754.725] Initializing built-in extension SYNC
    [ 8754.725] Initializing built-in extension XKEYBOARD
    [ 8754.726] Initializing built-in extension XC-MISC
    [ 8754.727] Initializing built-in extension SECURITY
    [ 8754.728] Initializing built-in extension XINERAMA
    [ 8754.728] Initializing built-in extension XFIXES
    [ 8754.729] Initializing built-in extension RENDER
    [ 8754.730] Initializing built-in extension RANDR
    [ 8754.730] Initializing built-in extension COMPOSITE
    [ 8754.731] Initializing built-in extension DAMAGE
    [ 8754.731] Initializing built-in extension MIT-SCREEN-SAVER
    [ 8754.732] Initializing built-in extension DOUBLE-BUFFER
    [ 8754.733] Initializing built-in extension RECORD
    [ 8754.733] Initializing built-in extension DPMS
    [ 8754.734] Initializing built-in extension X-Resource
    [ 8754.735] Initializing built-in extension XVideo
    [ 8754.735] Initializing built-in extension XVideo-MotionCompensation
    [ 8754.736] Initializing built-in extension XFree86-VidModeExtension
    [ 8754.736] Initializing built-in extension XFree86-DGA
    [ 8754.737] Initializing built-in extension XFree86-DRI
    [ 8754.737] Initializing built-in extension DRI2
    [ 8754.737] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 8754.737] (II) LoadModule: "glx"
    [ 8754.738] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 8754.738] (II) Module glx: vendor="X.Org Foundation"
    [ 8754.738] compiled for 1.14.1, module version = 1.0.0
    [ 8754.738] ABI class: X.Org Server Extension, version 7.0
    [ 8754.738] (==) AIGLX enabled
    [ 8754.738] Loading extension GLX
    [ 8754.738] (II) LoadModule: "fbdev"
    [ 8754.738] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 8754.738] (II) Module fbdev: vendor="X.Org Foundation"
    [ 8754.738] compiled for 1.14.0, module version = 0.4.3
    [ 8754.738] Module class: X.Org Video Driver
    [ 8754.738] ABI class: X.Org Video Driver, version 14.1
    [ 8754.738] (II) LoadModule: "nouveau"
    [ 8754.738] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 8754.738] (II) Module nouveau: vendor="X.Org Foundation"
    [ 8754.738] compiled for 1.14.0, module version = 1.0.7
    [ 8754.738] Module class: X.Org Video Driver
    [ 8754.738] ABI class: X.Org Video Driver, version 14.1
    [ 8754.738] (II) FBDEV: driver for framebuffer: fbdev
    [ 8754.738] (II) NOUVEAU driver
    [ 8754.738] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 8754.738] RIVA TNT (NV04)
    [ 8754.739] RIVA TNT2 (NV05)
    [ 8754.739] GeForce 256 (NV10)
    [ 8754.739] GeForce 2 (NV11, NV15)
    [ 8754.739] GeForce 4MX (NV17, NV18)
    [ 8754.739] GeForce 3 (NV20)
    [ 8754.739] GeForce 4Ti (NV25, NV28)
    [ 8754.739] GeForce FX (NV3x)
    [ 8754.739] GeForce 6 (NV4x)
    [ 8754.739] GeForce 7 (G7x)
    [ 8754.739] GeForce 8 (G8x)
    [ 8754.739] GeForce GTX 200 (NVA0)
    [ 8754.739] GeForce GTX 400 (NVC0)
    [ 8754.739] (++) using VT number 2
    [ 8754.739] (WW) Falling back to old probe method for fbdev
    [ 8754.739] (II) Loading sub module "fbdevhw"
    [ 8754.739] (II) LoadModule: "fbdevhw"
    [ 8754.739] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 8754.739] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 8754.739] compiled for 1.14.1, module version = 0.0.2
    [ 8754.739] ABI class: X.Org Video Driver, version 14.1
    [ 8754.739] (II) FBDEV(0): using /dev/fb1
    [ 8754.739] (II) [drm] nouveau interface version: 1.1.0
    [ 8754.739]
    Fatal server error:
    [ 8754.739] Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
    [ 8754.739]
    [ 8754.739] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 8754.739] (EE) Please also check the log file at "/var/log/Xorg.1.log" for additional information.
    [ 8754.739] (EE)
    [ 8754.742] Server terminated with error (1). Closing log file.
    One thing I attempted was using the udl kernel module. If I remember correctly, it would detect the display, but I could not get it to show any output. Not adequate, and I'd be moving backwards since I'm suspecting this is a bug in fbdev.c, not the udlfb.
    One of the issues I have with a multiseat configuration (which, honestly, really is not optimal anyhow) is that whichever X display I'm not using freezes completely until it gets focus again. There's probably a workaround for this issue (I hope), but seeing as others seem to have paved the way for solutions to this problem, I can only assume the answer for true multi-monitor support lies somewhere.
    Edit 1:43 AM Sunday, June 2, 2013 (EDT)
    Trying this out with bumblebee and proprietary nvidia drivers (nouveau doesn't currently play well with bumblebee). For what it's worth, here's my dmesg output:
    [ 2.410269] udlfb: DisplayLink Lenovo LT1421 wide - serial #6V9BBRM1
    [ 2.410273] udlfb: vid_17e9&pid_03e0&rev_0108 driver's dlfb_data struct at ffff880230bb1800
    [ 2.410274] udlfb: console enable=1
    [ 2.410275] udlfb: fb_defio enable=1
    [ 2.410275] udlfb: shadow enable=1
    [ 2.410376] udlfb: vendor descriptor length:17 data:17 5f 01 0015 05 00 01 03 00 04
    [ 2.410380] udlfb: DL chip limited to 1500000 pixel modes
    [ 2.410436] udlfb: allocated 4 65024 byte urbs
    [ 2.503239] udlfb: 1366x768 @ 60 Hz valid mode
    [ 2.503245] udlfb: Reallocating framebuffer. Addresses will change!
    [ 2.504482] udlfb: 1366x768 @ 60 Hz valid mode
    [ 2.504488] udlfb: set_par mode 1366x768
    [ 2.507644] udlfb: DisplayLink USB device /dev/fb1 attached. 1366x768 resolution. Using 4104K framebuffer memory
    Here's a list of related information I've found that isn't mentioned above:
    Getting Hotplugging working with a DisplayLink USB to DVI adapter, keithp, July 2012
    DisplayLink on Linux, Mulchman's Blog (archive)
    Dual Monitor (Multi seat) setup with Displaylink USB Montors, red
    DisplayLink protocol reference information, 2008
    DisplayLink X server crashes, Libdlo mailing list
    DisplayLink USB GPU Hot-Plugging On Linux, Phoronix, July 2012
        Claims DisplayLink USB GPU hotplugging "now works properly under Linux." One year ago.
    Mutli-monitor on the go, DisplayLink usb monitor, mitechie, November 2007
        One of the only posts I've found where this actually is proven to work. It does not, however, work for me.
    DisplayLink on Fedora Linux, nameq0, September 2011
    Fedora 17 seems to have good support Pieaidie EINS!, May 2012
    Somewhat relevant posts on Multiseat X:
    Multiseat, X.org
    MultiseatX, Ubuntu
    Xorg Multiseat, Arch Wiki
    Relevant Arch forum posts:
    void7910 found a workaround with a separate X server and x2x
    schrotti found a solution
    camerongray and wassy had the same problem as me, never found a solution
    camerongray claims it works in Fedora
    nobody ever replied to GeoffTK
    webdawg found a bunch of posts suggesting xrandr can detect DisplayLink. I haven't found this to be true.
    suley couldn't get xrandr to detect DisplayLink
    gjasso got it working (linked above, no success for me)
    pjoter claims he configured a DisplayLink monitor to serve as a second graphics card, but provides no details whatsoever
    BurntSushi claims RandR has no multi-GPU support in January 2013 ...
    Pyro2927 had success setting his USB monitor to Screen 0, which I've done myself with no success
    Last edited by ndt (2013-06-02 05:46:37)

    tbranyen—thanks a bunch for the post. I'm going to give that a shot, and update the wiki once I get my findings together on the matter.
    Can you please tell me what kernel version you have gotten this working with, and the output of:
    egrep -i " connected|card detect|primary dev" /var/log/Xorg.0.log
    Also, the screen "garbage" you're seeing is an artifact of improper damage handling in the driver. I haven't discovered yet whether this is a problem with the kernel drivers or X, but the reason it occurs is this: DisplayLink manages to drive an entire display over USB by only updating pixels that are "damaged", or altered, each frame. When you initially load the screen, it spits garbage across the entire screen. On a normal display, this garbage is removed on the subsequently drawn frame. However, with DisplayLink, the graphics card does a bunch of calculations to see which frames specifically it has to change. It then sends to the USB screen data only for those particular pixels. A fairly ingenious solution, if you ask me, but when it goes wrong you see artifacts like you are describing.
    In order to remove them, just maximize a window once. This will "damage" the entire screen and force it to redraw all pixels.
    Edit:
    I just got it working with your recommendations. It was funny, though - I had to use xrandr to offload my Intel card to the modesetting driver before I could get things functional.
    $ xrandr --listproviders :(
    Providers: number : 2
    Provider 0: id: 0x66 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 2 outputs: 2 associated providers: 0 name:Intel
    Provider 1: id: 0x41 cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 0 name:modesetting
    $ xrandr --setprovideroutputsource 1 0
    $ xrandr
    Screen 0: minimum 320 x 200, current 1600 x 900, maximum 8192 x 8192
    LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
    1600x900 60.0*+ 40.0
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    VGA1 disconnected (normal left inverted right x axis y axis)
    DVI-4 connected (normal left inverted right x axis y axis)
    1366x768 60.0 +
    $ xrandr --auto --output DVI-4 --right-of LVDS1
    That's the command list I had to use to get it working.
    And then I experienced the mouse bug that you described. And maximizing a window doesn't fix it like I had hoped (as it did with udlfb). So my guess is that udl still isn't perfect.
    Last edited by ndt (2013-07-10 04:14:24)

  • [Solved] HP Omen 15 - Slow SSD after IRQ 16 error

    [EDIT]
    Sorry for wasting everyone's time. It turned out that I had only tried installing nvidia/bumblebee without the nomodeset option..and apparently that didn't work properly for some reason.
    So if anyone else runs into this problem here's the solution:
    1) Boot your installation media with the 'nomodeset' kernel option (this is especially important for live images (fedora,ubuntu,...) which are completely unusable otherwise
    2) With nomodeset still enabled, install the nvidia driver, bumblebee and bbswitch
    4) Enable bumblebeed.service
    3) remove the nomodeset option
    Also I updated the microcode on the CPU, but as far as I could tell that didn't affect anything.
    [/EDIT]
    Hi everyone,
    I bought a new HP Omen 15 laptop. In Windows everything runs fine, but on Linux I get an IRQ 16 error after which SSD reads become so painfully slow that the system becomes mostly unusable. This issue has been posted by someone on the Ubuntu forums, but nobody had a solution there.
    Hopefully one of you will be able to help me, because right now I'm stuck on Windows for doing my work...and I get absolutely no joy out of that
    Hardware:
    i7-4710HQ
    Nvidia GeForce GTX 860 and Intel® HD Graphics 4600
    512GB Samsung XP941 SSD (M.2)
    Currently the system dual-boots with Windows 8.1, secure boot disabled, using gummiboot on the windows UEFI partition.
    The actual error that (I think) leads to the performance hit is
    [ 13.608625] 0000000000000000 96859b6ad089d33d ffff88045f243e28 ffffffff8154fb74
    [ 13.608632] 0000000000000000 ffff880083514e00 ffff88045f243e58 ffffffff810cd406
    [ 13.608637] 000000013ffeb056 ffff880083514e00 0000000000000000 0000000000000010
    [ 13.608643] Call Trace:
    [ 13.608646] <IRQ> [<ffffffff8154fb74>] dump_stack+0x4e/0x71
    [ 13.608665] [<ffffffff810cd406>] __report_bad_irq+0x36/0xd0
    [ 13.608671] [<ffffffff810cd7b7>] note_interrupt+0x257/0x2a0
    [ 13.608677] [<ffffffff810cacee>] handle_irq_event_percpu+0xae/0x1f0
    [ 13.608682] [<ffffffff810cae71>] handle_irq_event+0x41/0x70
    [ 13.608689] [<ffffffff810cdd47>] handle_fasteoi_irq+0x87/0x140
    [ 13.608698] [<ffffffff81017362>] handle_irq+0x22/0x40
    [ 13.608704] [<ffffffff815581b1>] do_IRQ+0x51/0xf0
    [ 13.608711] [<ffffffff815561ad>] common_interrupt+0x6d/0x6d
    [ 13.608714] <EOI> [<ffffffff81403aa5>] ? cpuidle_enter_state+0x65/0x1a0
    [ 13.608730] [<ffffffff81403a91>] ? cpuidle_enter_state+0x51/0x1a0
    [ 13.608737] [<ffffffff81403cc7>] cpuidle_enter+0x17/0x20
    [ 13.608745] [<ffffffff810b3539>] cpu_startup_entry+0x3d9/0x460
    [ 13.608752] [<ffffffff8104a994>] start_secondary+0x1b4/0x1f0
    [ 13.608756] handlers:
    [ 13.608809] [<ffffffffa0128410>] ahci_single_irq_intr [libahci]
    [ 13.608873] Disabling IRQ #16
    What's interesting is, that this problem does not occur if I set the 'nomodeset' kernel option. So probably it's somehow related to graphics. The performance drop is quite visible:
    With nomodeset:
    hdparm -Tt --verbose /dev/sda
    /dev/sda:
    Timing cached reads: 21006 MB in 2.00 seconds = 10513.48 MB/sec
    Timing buffered disk reads: 2378 MB in 3.00 seconds = 792.36 MB/sec
    ...and without:
    hdparm -Tt --verbose /dev/sda
    /dev/sda:
    Timing cached reads: 12274 MB in 2.00 seconds = 6140.85 MB/sec
    Timing buffered disk reads: 8 MB in 3.20 seconds = 2.50 MB/sec
    So just about 0.3% of the original speed.
    The above information are form a fresh install without any additional packages installed. Installing nvidia/intel/bumblebee did not help either, so I've left it in the fresh state to be debuggable.
    Here are various outputs from some commands that might be useful to determine the error source, let me know if you need anything else!
    hdparm /dev/sda
    /dev/sda:
    multcount = 0 (off)
    IO_support = 1 (32-bit)
    readonly = 0 (off)
    readahead = 256 (on)
    geometry = 62260/255/63, sectors = 1000215216, start = 0
    lspci
    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
    00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
    00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
    00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
    00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
    00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
    00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)
    00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
    00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
    00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
    01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2)
    07:00.0 SATA controller: Samsung Electronics Co Ltd XP941 PCIe SSD (rev 01)
    08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
    09:00.0 Network controller: Intel Corporation Wireless 7260 (rev c3)
    cat /proc/interrupts
    CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
    0: 24 0 0 0 0 0 0 0 IR-IO-APIC-edge timer
    1: 901 2 2 1 3 1 1 0 IR-IO-APIC-edge i8042
    8: 1 0 0 0 0 0 0 0 IR-IO-APIC-edge rtc0
    9: 199 49 37 75 13 25 6 18 IR-IO-APIC-fasteoi acpi
    12: 4419 17 5 8 2 6 7 7 IR-IO-APIC-edge i8042
    16: 3146 195401 312 395 353 184 102 108 IR-IO-APIC 16-fasteoi 0000:07:00.0
    24: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar0
    25: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar1
    26: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
    27: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
    28: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
    29: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
    30: 6 1 2 9 1 0 1 2 IR-PCI-MSI-edge rtsx_pci
    31: 574 190 28 34 154 29 11 7 IR-PCI-MSI-edge xhci_hcd
    32: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge 0000:00:1f.2
    33: 1 0 0 0 0 0 3 7 IR-PCI-MSI-edge mei_me
    34: 5 138 79 0 5 76 10 0 IR-PCI-MSI-edge snd_hda_intel
    35: 169 0 1 0 1 0 0 0 IR-PCI-MSI-edge i915
    36: 17 3 2 7 6 14 2 11 IR-PCI-MSI-edge iwlwifi
    37: 1 26 0 0 32 0 0 0 IR-PCI-MSI-edge snd_hda_intel
    NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts
    LOC: 958 2678 1069 355 1505 562 682 321 Local timer interrupts
    SPU: 0 0 0 0 0 0 0 0 Spurious interrupts
    PMI: 0 0 0 0 0 0 0 0 Performance monitoring interrupts
    IWI: 1 1 0 1 0 0 0 0 IRQ work interrupts
    RTR: 0 0 0 0 0 0 0 0 APIC ICR read retries
    RES: 204 193 207 200 136 177 195 285 Rescheduling interrupts
    CAL: 898 819 847 830 822 853 843 869 Function call interrupts
    TLB: 10 6 8 3 4 7 3 5 TLB shootdowns
    TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts
    THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts
    MCE: 0 0 0 0 0 0 0 0 Machine check exceptions
    MCP: 2 2 2 2 2 2 2 2 Machine check polls
    HYP: 0 0 0 0 0 0 0 0 Hypervisor callback interrupts
    ERR: 0
    MIS: 0
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.18.6-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015
    [ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/mapper/VolGroup00-lv_root rw
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009c07efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009c07f000-0x000000009ce7efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] e820: update [mem 0x78e8e018-0x78ea7657] usable ==> usable
    [ 0.000000] e820: update [mem 0x78e7d018-0x78e8d057] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000078e7d017] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000078e7d018-0x0000000078e8d057] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000078e8d058-0x0000000078e8e017] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000078e8e018-0x0000000078ea7657] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000078ea7658-0x000000009c07efff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000009c07f000-0x000000009ce7efff] reserved
    [ 0.000000] reserve setup_data: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
    [ 0.000000] reserve setup_data: [mem 0x000000009cfff000-0x000000009cffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000009d000000-0x000000009f9fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045f5fffff] usable
    [ 0.000000] efi: EFI v2.31 by INSYDE Corp.
    [ 0.000000] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9ce7df18
    [ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000007000) (0MB)
    [ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000007000-0x000000000006f000) (0MB)
    [ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000006f000-0x0000000000070000) (0MB)
    [ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000070000-0x0000000000088000) (0MB)
    [ 0.000000] efi: mem05: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000000088000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem06: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem07: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x0000000001e3b000) (14MB)
    [ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001e3b000-0x0000000078680000) (1896MB)
    [ 0.000000] efi: mem10: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000078680000-0x00000000786a0000) (0MB)
    [ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000786a0000-0x0000000078e7d000) (7MB)
    [ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000078e7d000-0x0000000078ea8000) (0MB)
    [ 0.000000] efi: mem13: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000078ea8000-0x000000007ace3000) (30MB)
    [ 0.000000] efi: mem14: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000007ace3000-0x000000007b670000) (9MB)
    [ 0.000000] efi: mem15: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b670000-0x000000007b67a000) (0MB)
    [ 0.000000] efi: mem16: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007b67a000-0x000000007b67f000) (0MB)
    [ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b67f000-0x000000007b865000) (1MB)
    [ 0.000000] efi: mem18: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x000000007b865000-0x000000007b87f000) (0MB)
    [ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b87f000-0x000000007f7d2000) (63MB)
    [ 0.000000] efi: mem20: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007f7d2000-0x000000008001a000) (8MB)
    [ 0.000000] efi: mem21: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008001a000-0x0000000081106000) (16MB)
    [ 0.000000] efi: mem22: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081106000-0x00000000815f5000) (4MB)
    [ 0.000000] efi: mem23: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000815f5000-0x000000008161b000) (0MB)
    [ 0.000000] efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008161b000-0x0000000081659000) (0MB)
    [ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081659000-0x00000000819e1000) (3MB)
    [ 0.000000] efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000819e1000-0x00000000819e2000) (0MB)
    [ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000819e2000-0x00000000819fe000) (0MB)
    [ 0.000000] efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000819fe000-0x0000000081a04000) (0MB)
    [ 0.000000] efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a04000-0x0000000081a0c000) (0MB)
    [ 0.000000] efi: mem30: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081a0c000-0x0000000081a0d000) (0MB)
    [ 0.000000] efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a0d000-0x0000000081a38000) (0MB)
    [ 0.000000] efi: mem32: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081a38000-0x0000000081a3a000) (0MB)
    [ 0.000000] efi: mem33: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a3a000-0x0000000081b48000) (1MB)
    [ 0.000000] efi: mem34: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081b48000-0x0000000081b49000) (0MB)
    [ 0.000000] efi: mem35: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081b49000-0x0000000081bcc000) (0MB)
    [ 0.000000] efi: mem36: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bcc000-0x0000000081bd4000) (0MB)
    [ 0.000000] efi: mem37: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd4000-0x0000000081bd5000) (0MB)
    [ 0.000000] efi: mem38: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bd5000-0x0000000081bd7000) (0MB)
    [ 0.000000] efi: mem39: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd7000-0x0000000081bd8000) (0MB)
    [ 0.000000] efi: mem40: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bd8000-0x0000000081bd9000) (0MB)
    [ 0.000000] efi: mem41: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd9000-0x0000000081c1b000) (0MB)
    [ 0.000000] efi: mem42: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c1b000-0x0000000081c1c000) (0MB)
    [ 0.000000] efi: mem43: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c1c000-0x0000000081c20000) (0MB)
    [ 0.000000] efi: mem44: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c20000-0x0000000081c22000) (0MB)
    [ 0.000000] efi: mem45: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c22000-0x0000000081c2d000) (0MB)
    [ 0.000000] efi: mem46: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c2d000-0x0000000081c30000) (0MB)
    [ 0.000000] efi: mem47: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c30000-0x0000000081c52000) (0MB)
    [ 0.000000] efi: mem48: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c52000-0x0000000081c53000) (0MB)
    [ 0.000000] efi: mem49: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c53000-0x0000000081c76000) (0MB)
    [ 0.000000] efi: mem50: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c76000-0x0000000081c77000) (0MB)
    [ 0.000000] efi: mem51: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c77000-0x0000000081c78000) (0MB)
    [ 0.000000] efi: mem52: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c78000-0x0000000081c7a000) (0MB)
    [ 0.000000] efi: mem53: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c7a000-0x000000008387f000) (28MB)
    [ 0.000000] efi: mem54: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008387f000-0x000000009bc0e000) (387MB)
    [ 0.000000] efi: mem55: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009bc0e000-0x000000009c07f000) (4MB)
    [ 0.000000] efi: mem56: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c07f000-0x000000009c47f000) (4MB)
    [ 0.000000] efi: mem57: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c47f000-0x000000009c67f000) (2MB)
    [ 0.000000] efi: mem58: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000009c67f000-0x000000009ce7f000) (8MB)
    [ 0.000000] efi: mem59: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009ce7f000-0x000000009cf7f000) (1MB)
    [ 0.000000] efi: mem60: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cf7f000-0x000000009cfff000) (0MB)
    [ 0.000000] efi: mem61: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009cfff000-0x000000009d000000) (0MB)
    [ 0.000000] efi: mem62: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000045f600000) (13814MB)
    [ 0.000000] efi: mem63: [Reserved | | | | | | | | | ] range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem64: [Reserved | | | | | | | | | ] range=[0x000000009d000000-0x000000009fa00000) (42MB)
    [ 0.000000] efi: mem65: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
    [ 0.000000] efi: mem66: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000feb00000-0x00000000feb10000) (0MB)
    [ 0.000000] efi: mem67: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem68: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
    [ 0.000000] efi: mem69: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem70: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed20000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem71: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ffb00000-0x0000000100000000) (5MB)
    [ 0.000000] SMBIOS 2.8 present.
    [ 0.000000] DMI: Hewlett-Packard HP OMEN Notebook PC 15/2332, BIOS F.09 12/27/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x45f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7800000000 write-back
    [ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
    [ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
    [ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
    [ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x45f400000-0x45f5fffff]
    [ 0.000000] [mem 0x45f400000-0x45f5fffff] page 2M
    [ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45f3fffff]
    [ 0.000000] [mem 0x45c000000-0x45f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
    [ 0.000000] [mem 0x400000000-0x43fffffff] page 1G
    [ 0.000000] [mem 0x440000000-0x45bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9c07efff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x9bffffff] page 2M
    [ 0.000000] [mem 0x9c000000-0x9c07efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
    [ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k
    [ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
    [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x7f7d2000-0x80019fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000F4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
    [ 0.000000] ACPI: FACP 0x000000009CFF7000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: DSDT 0x000000009CFDB000 018700 (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000)
    [ 0.000000] ACPI: FACS 0x000000009CF67000 000040
    [ 0.000000] ACPI: TCPA 0x000000009CFFD000 000032 (v02 HPQOEM INSYDE 00000000 HP 00040000)
    [ 0.000000] ACPI: UEFI 0x000000009CFFC000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: FPDT 0x000000009CFFA000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: MSDM 0x000000009CFF9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: ASF! 0x000000009CFF8000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: HPET 0x000000009CFF6000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: APIC 0x000000009CFF5000 00008C (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: MCFG 0x000000009CFF4000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: WDAT 0x000000009CFDA000 000224 (v01 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFD9000 0007F6 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 0x000000009CFD7000 000028 (v01 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: LPIT 0x000000009CFD6000 000094 (v01 HPQOEM INSYDE 00000000 HP 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFD5000 0003E1 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
    [ 0.000000] ACPI: ASPT 0x000000009CFD4000 000034 (v07 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: DBGP 0x000000009CFD3000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFCB000 000539 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFCA000 000AD8 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFC6000 003361 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFBE000 003FC4 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFC5000 00040A (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
    [ 0.000000] ACPI: WDTT 0x000000009CFC4000 000224 (v02 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFC3000 00006B (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BGRT 0x000000009CFC2000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: TPM2 0x000000009CFBD000 000044 (v03 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: DMAR 0x000000009CFBC000 0000A8 (v01 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045f5fffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x45f5fa000-0x45f5fdfff]
    [ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044ec00000-ffff88045ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x45f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0006efff]
    [ 0.000000] node 0: [mem 0x00070000-0x00087fff]
    [ 0.000000] node 0: [mem 0x00100000-0x9c07efff]
    [ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x45f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x45f5fffff]
    [ 0.000000] On node 0 totalpages: 4175366
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3974 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9922 pages used for memmap
    [ 0.000000] DMA32 zone: 635008 pages, LIFO batch:31
    [ 0.000000] Normal zone: 55256 pages used for memmap
    [ 0.000000] Normal zone: 3536384 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x78e7d000-0x78e7dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x78e8d000-0x78e8dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x78e8e000-0x78e8efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x78ea7000-0x78ea7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9c07f000-0x9ce7efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
    [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88045f200000 s82880 r8192 d31808 u262144
    [ 0.000000] pcpu-alloc: s82880 r8192 d31808 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4110103
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/mapper/VolGroup00-lv_root rw
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 16285004K/16701464K available (5481K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 416460K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:488 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 67108864 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2494.211 MHz processor
    [ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.27 BogoMIPS (lpj=8314036)
    [ 0.000023] pid_max: default: 32768 minimum: 301
    [ 0.000028] ACPI: Core revision 20140926
    [ 0.014940] ACPI: All ACPI Tables successfully acquired
    [ 0.048477] Security Framework initialized
    [ 0.048484] Yama: becoming mindful.
    [ 0.049168] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.051306] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.052245] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.052257] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.052448] Initializing cgroup subsys memory
    [ 0.052452] Initializing cgroup subsys devices
    [ 0.052454] Initializing cgroup subsys freezer
    [ 0.052455] Initializing cgroup subsys net_cls
    [ 0.052457] Initializing cgroup subsys blkio
    [ 0.052472] CPU: Physical Processor ID: 0
    [ 0.052473] CPU: Processor Core ID: 0
    [ 0.052476] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.053226] mce: CPU supports 9 MCE banks
    [ 0.053236] CPU0: Thermal monitoring enabled (TM1)
    [ 0.053246] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    [ 0.053323] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
    [ 0.053911] Ignoring BGRT: invalid status 0 (expected 1)
    [ 0.055124] ftrace: allocating 20931 entries in 82 pages
    [ 0.061596] dmar: Host address width 39
    [ 0.061597] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.061601] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
    [ 0.061602] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.061605] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
    [ 0.061606] dmar: RMRR base: 0x0000009cd6f000 end: 0x0000009cd8efff
    [ 0.061606] dmar: RMRR base: 0x0000009d800000 end: 0x0000009f9fffff
    [ 0.061670] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.061671] HPET id 0 under DRHD base 0xfed91000
    [ 0.061671] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.061783] Enabled IRQ remapping in x2apic mode
    [ 0.061784] Enabling x2apic
    [ 0.061784] Enabled x2apic
    [ 0.061789] Switched APIC routing to cluster x2apic.
    [ 0.062206] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.095245] smpboot: CPU0: Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz (fam: 06, model: 3c, stepping: 03)
    [ 0.095250] TSC deadline timer enabled
    [ 0.095266] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.095280] ... version: 3
    [ 0.095281] ... bit width: 48
    [ 0.095281] ... generic registers: 4
    [ 0.095282] ... value mask: 0000ffffffffffff
    [ 0.095283] ... max period: 0000ffffffffffff
    [ 0.095283] ... fixed-purpose events: 3
    [ 0.095284] ... event mask: 000000070000000f
    [ 0.118723] x86: Booting SMP configuration:
    [ 0.118724] .... node #0, CPUs: #1
    [ 0.132727] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.139403] #2 #3 #4 #5 #6 #7
    [ 0.253216] x86: Booted up 1 node, 8 CPUs
    [ 0.253219] smpboot: Total of 8 processors activated (39923.18 BogoMIPS)
    [ 0.259240] devtmpfs: initialized
    [ 0.261225] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
    [ 0.261788] pinctrl core: initialized pinctrl subsystem
    [ 0.261821] RTC time: 15:05:14, date: 03/07/15
    [ 0.261896] NET: Registered protocol family 16
    [ 0.272461] cpuidle: using governor ladder
    [ 0.285819] cpuidle: using governor menu
    [ 0.285860] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.285861] ACPI: bus type PCI registered
    [ 0.285863] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.285923] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.285925] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.286198] PCI: Using configuration type 1 for base access
    [ 0.299479] ACPI: Added _OSI(Module Device)
    [ 0.299481] ACPI: Added _OSI(Processor Device)
    [ 0.299482] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.299483] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.302912] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.305266] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.306241] ACPI: Dynamic OEM Table Load:
    [ 0.306250] ACPI: SSDT 0xFFFF880448503800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20131115)
    [ 0.319415] ACPI: Dynamic OEM Table Load:
    [ 0.319425] ACPI: SSDT 0xFFFF8804485D2000 0005AA (v01 PmRef ApIst 00003000 INTL 20131115)
    [ 0.332651] ACPI: Dynamic OEM Table Load:
    [ 0.332660] ACPI: SSDT 0xFFFF88044858EE00 000119 (v01 PmRef ApCst 00003000 INTL 20131115)
    [ 0.384073] ACPI: Interpreter enabled
    [ 0.384081] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
    [ 0.384088] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
    [ 0.384107] ACPI: (supports S0 S3 S4 S5)
    [ 0.384108] ACPI: Using IOAPIC for interrupt routing
    [ 0.384130] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.388473] ACPI: Power Resource [PG00] (on)
    [ 0.390539] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 0.390543] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.390880] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.391231] PCI host bridge to bus 0000:00
    [ 0.391233] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 0.391234] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.391236] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.391237] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.391237] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.391238] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.391239] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.391240] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.391241] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.391242] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.391243] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.391244] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.391245] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.391246] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.391247] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.391248] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.391248] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    [ 0.391249] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [ 0.391255] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [ 0.391363] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [ 0.391390] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.391467] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.391495] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [ 0.391503] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd13fffff 64bit]
    [ 0.391507] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.391511] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
    [ 0.391611] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
    [ 0.391617] pci 0000:00:03.0: reg 0x10: [mem 0xd1710000-0xd1713fff 64bit]
    [ 0.391739] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [ 0.391754] pci 0000:00:14.0: reg 0x10: [mem 0xd1700000-0xd170ffff 64bit]
    [ 0.391806] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.391878] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.391904] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [ 0.391922] pci 0000:00:16.0: reg 0x10: [mem 0xd1718000-0xd171800f 64bit]
    [ 0.391977] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.392081] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [ 0.392094] pci 0000:00:1b.0: reg 0x10: [mem 0xd1714000-0xd1717fff 64bit]
    [ 0.392153] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.392226] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.392251] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [ 0.392316] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.392392] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.392418] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
    [ 0.392477] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.392552] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.392576] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
    [ 0.392635] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.392713] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.392742] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
    [ 0.392924] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [ 0.392937] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
    [ 0.392943] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
    [ 0.392950] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
    [ 0.392956] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
    [ 0.392962] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
    [ 0.392968] pci 0000:00:1f.2: reg 0x24: [mem 0xd171b000-0xd171b7ff]
    [ 0.393001] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.393092] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [ 0.393105] pci 0000:00:1f.3: reg 0x10: [mem 0xd1719000-0xd17190ff 64bit]
    [ 0.393121] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
    [ 0.393269] pci 0000:01:00.0: [10de:1392] type 00 class 0x030200
    [ 0.393285] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
    [ 0.393301] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 0.393317] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
    [ 0.393328] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
    [ 0.393338] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 0.393417] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 0.399365] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 0.399367] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.399370] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
    [ 0.399373] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 0.399511] pci 0000:07:00.0: [144d:a800] type 00 class 0x010601
    [ 0.399581] pci 0000:07:00.0: reg 0x24: [mem 0xd1600000-0xd1601fff]
    [ 0.399611] pci 0000:07:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 0.399698] pci 0000:07:00.0: PME# supported from D3hot D3cold
    [ 0.399751] pci 0000:07:00.0: System wakeup disabled by ACPI
    [ 0.406055] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 0.406061] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd16fffff]
    [ 0.406133] pci 0000:08:00.0: [10ec:5227] type 00 class 0xff0000
    [ 0.406153] pci 0000:08:00.0: reg 0x10: [mem 0xd1500000-0xd1500fff]
    [ 0.406285] pci 0000:08:00.0: supports D1 D2
    [ 0.406286] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.406316] pci 0000:08:00.0: System wakeup disabled by ACPI
    [ 0.412720] pci 0000:00:1c.4: PCI bridge to [bus 08]
    [ 0.412725] pci 0000:00:1c.4: bridge window [mem 0xd1500000-0xd15fffff]
    [ 0.412836] pci 0000:09:00.0: [8086:08b1] type 00 class 0x028000
    [ 0.412890] pci 0000:09:00.0: reg 0x10: [mem 0xd1400000-0xd1401fff 64bit]
    [ 0.413128] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
    [ 0.413183] pci 0000:09:00.0: System wakeup disabled by ACPI
    [ 0.419415] pci 0000:00:1c.5: PCI bridge to [bus 09]
    [ 0.419420] pci 0000:00:1c.5: bridge window [mem 0xd1400000-0xd14fffff]
    [ 0.419464] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.420118] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420157] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420195] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420233] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420269] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420305] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420341] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420377] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420652] ACPI: Enabled 6 GPEs in block 00 to 3F
    [ 0.420689] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.420760] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 0.420762] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.420764] vgaarb: loaded
    [ 0.420765] vgaarb: bridge control possible 0000:00:02.0
    [ 0.420853] PCI: Using ACPI for IRQ routing
    [ 0.425911] PCI: pci_cache_line_size set to 64 bytes
    [ 0.425949] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
    [ 0.425950] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
    [ 0.425951] e820: reserve RAM buffer [mem 0x78e7d018-0x7bffffff]
    [ 0.425952] e820: reserve RAM buffer [mem 0x78e8e018-0x7bffffff]
    [ 0.425953] e820: reserve RAM buffer [mem 0x9c07f000-0x9fffffff]
    [ 0.425954] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
    [ 0.425955] e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff]
    [ 0.426019] NetLabel: Initializing
    [ 0.426020] NetLabel: domain hash size = 128
    [ 0.426021] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.426028] NetLabel: unlabeled traffic allowed by default
    [ 0.426041] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.426044] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.428075] Switched to clocksource hpet
    [ 0.431534] pnp: PnP ACPI init
    [ 0.431620] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 0.431622] system 00:00: [io 0xffff] has been reserved
    [ 0.431623] system 00:00: [io 0xffff] has been reserved
    [ 0.431624] system 00:00: [io 0xffff] has been reserved
    [ 0.431625] system 00:00: [io 0x1800-0x18fe] could not be reserved
    [ 0.431626] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 0.431628] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.431656] system 00:01: [io 0x0800-0x087f] has been reserved
    [ 0.431658] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.431677] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.431703] system 00:03: [io 0x1854-0x1857] has been reserved
    [ 0.431705] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.431750] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
    [ 0.431766] pnp 00:05: Plug and Play ACPI device, IDs SYN1ed8 SYN1e00 SYN0002 PNP0f13 (active)
    [ 0.431848] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.431849] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.431850] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.431852] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.431853] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.431854] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.431855] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 0.431856] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.431857] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.431858] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved
    [ 0.431860] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
    [ 0.431861] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.432212] pnp: PnP ACPI: found 7 devices
    [ 0.438072] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
    [ 0.438074] pci 0000:07:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
    [ 0.438102] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
    [ 0.438103] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 0.438105] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.438107] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
    [ 0.438109] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 0.438112] pci 0000:07:00.0: BAR 6: assigned [mem 0xd1610000-0xd161ffff pref]
    [ 0.438113] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 0.438117] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd16fffff]
    [ 0.438123] pci 0000:00:1c.4: PCI bridge to [bus 08]
    [ 0.438127] pci 0000:00:1c.4: bridge window [mem 0xd1500000-0xd15fffff]
    [ 0.438133] pci 0000:00:1c.5: PCI bridge to [bus 09]
    [ 0.438137] pci 0000:00:1c.5: bridge window [mem 0xd1400000-0xd14fffff]
    [ 0.438143] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.438144] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.438145] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.438146] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.438147] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.438148] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.438149] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 0.438150] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.438151] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.438152] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.438153] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.438154] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    [ 0.438155] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    [ 0.438156] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    [ 0.438157] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    [ 0.438158] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
    [ 0.438159] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
    [ 0.438160] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.438161] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd0ffffff]
    [ 0.438161] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 0.438163] pci_bus 0000:07: resource 1 [mem 0xd1600000-0xd16fffff]
    [ 0.438164] pci_bus 0000:08: resource 1 [mem 0xd1500000-0xd15fffff]
    [ 0.438165] pci_bus 0000:09: resource 1 [mem 0xd1400000-0xd14fffff]
    [ 0.438182] NET: Registered protocol family 2
    [ 0.438329] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.438470] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.438574] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.438585] TCP: reno registered
    [ 0.438597] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.438635] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.438690] NET: Registered protocol family 1
    [ 0.438701] pci 0000:00:02.0: Video device with shadowed ROM
    [ 0.440063] PCI: CLS 64 bytes, default 64
    [ 0.440092] Unpacking initramfs...
    [ 0.535471] Freeing initrd memory: 8480K (ffff88007f7d2000 - ffff88008001a000)
    [ 0.535494] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.535496] software IO TLB [mem 0x97c0e000-0x9bc0e000] (64MB) mapped at [ffff880097c0e000-ffff88009bc0dfff]
    [ 0.535525] Simple Boot Flag at 0x44 set to 0x1
    [ 0.535703] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 0.535742] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535747] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535753] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535759] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535764] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535770] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535775] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535781] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535821] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.535836] Scanning for low memory corruption every 60 seconds
    [ 0.536021] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.536041] Initialise system trusted keyring
    [ 0.536249] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.537029] zpool: loaded
    [ 0.537031] zbud: loaded
    [ 0.537161] VFS: Disk quotas dquot_6.5.2
    [ 0.537181] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.537256] msgmni has been set to 31953
    [ 0.537287] Key type big_key registered
    [ 0.537431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.537471] io scheduler noop registered
    [ 0.537473] io scheduler deadline registered
    [ 0.537490] io scheduler cfq registered (default)
    [ 0.537616] pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
    [ 0.537711] pcieport 0000:00:1c.0: irq 27 for MSI/MSI-X
    [ 0.537809] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
    [ 0.537906] pcieport 0000:00:1c.5: irq 29 for MSI/MSI-X
    [ 0.537967] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
    [ 0.537968] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 0.537970] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
    [ 0.537981] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.537982] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
    [ 0.537986] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.537996] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 0.537997] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
    [ 0.538000] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 0.538010] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
    [ 0.538011] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
    [ 0.538014] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
    [ 0.538023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.538035] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.538055] efifb: probing for efifb
    [ 0.538070] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90011c00000, using 8100k, total 8100k
    [ 0.538071] efifb: mode is 1920x1080x32, linelength=7680, pages=1
    [ 0.538071] efifb: scrolling: redraw
    [ 0.538072] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.541482] Console: switching to colour frame buffer device 240x67
    [ 0.544794] fb0: EFI VGA frame buffer device
    [ 0.544800] intel_idle: MWAIT substates: 0x42120
    [ 0.544801] intel_idle: v0.4 model 0x3C
    [ 0.544801] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.545023] GHES: HEST is not enabled!
    [ 0.545063] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.545351] Linux agpgart interface v0.103
    [ 0.545389] rtc_cmos 00:02: RTC can wake from S4
    [ 0.545490] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 0.545516] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.545524] Intel P-state driver initializing.
    [ 0.545680] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.545994] TCP: cubic registered
    [ 0.546216] NET: Registered protocol family 10
    [ 0.546732] NET: Registered protocol family 17
    [ 0.547560] Loading compiled-in X.509 certificates
    [ 0.547591] registered taskstats version 1
    [ 0.548780] Magic number: 7:609:82
    [ 0.548952] rtc_cmos 00:02: setting system clock to 2015-03-07 15:05:15 UTC (1425740715)
    [ 0.549136] PM: Hibernation image not present or could not be loaded.
    [ 0.551123] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
    [ 0.551126] Write protecting the kernel read-only data: 8192k
    [ 0.555482] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
    [ 0.557272] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
    [ 0.570421] random: systemd-tmpfile urandom read with 5 bits of entropy available
    [ 0.584356] device-mapper: uevent: version 1.0.3
    [ 0.584470] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected]
    [ 0.597541] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.602695] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.602710] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.603099] rtsx_pci 0000:08:00.0: irq 30 for MSI/MSI-X
    [ 0.603111] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 30
    [ 0.604239] ACPI: bus type USB registered
    [ 0.604267] usbcore: registered new interface driver usbfs
    [ 0.604273] SCSI subsystem initialized
    [ 0.604279] usbcore: registered new interface driver hub
    [ 0.604330] usbcore: registered new device driver usb
    [ 0.605601] libata version 3.00 loaded.
    [ 0.605678] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.605685] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 0.605779] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.605808] xhci_hcd 0000:00:14.0: irq 31 for MSI/MSI-X
    [ 0.606024] hub 1-0:1.0: USB hub found
    [ 0.606063] hub 1-0:1.0: 14 ports detected
    [ 0.609623] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.609626] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.609780] hub 2-0:1.0: USB hub found
    [ 0.609795] hub 2-0:1.0: 6 ports detected
    [ 0.610944] ahci 0000:00:1f.2: version 3.0
    [ 0.611066] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
    [ 0.611083] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.611102] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
    [ 0.611105] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
    [ 0.611516] scsi host0: ahci
    [ 0.611639] scsi host1: ahci
    [ 0.611727] scsi host2: ahci
    [ 0.611822] scsi host3: ahci
    [ 0.611861] ata1: SATA max UDMA/133 abar m2048@0xd171b000 port 0xd171b100 irq 32
    [ 0.611863] ata2: DUMMY
    [ 0.611864] ata3: DUMMY
    [ 0.611865] ata4: DUMMY
    [ 0.621966] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.624998] ahci 0000:07:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
    [ 0.625001] ahci 0000:07:00.0: flags: 64bit ncq led clo only pio ccc
    [ 0.625238] scsi host4: ahci
    [ 0.625288] ata5: SATA max UDMA/133 abar m8192@0xd1600000 port 0xd1600100 irq 16
    [ 0.808604] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
    [ 0.808642] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
    [ 0.808673] usb usb2-port2: couldn't allocate usb_device
    [ 0.808738] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
    [ 0.808768] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
    [ 0.808798] usb usb2-port6: couldn't allocate usb_device
    [ 0.932036] ata1: SATA link down (SStatus 0 SControl 300)
    [ 0.952070] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.952367] ata5.00: ATA-9: SAMSUNG MZHPU512HCGL-000H1, UXM62H1Q, max UDMA/133
    [ 0.952370] ata5.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.952660] ata5.00: configured for UDMA/133
    [ 0.952785] scsi 4:0:0:0: Direct-Access ATA SAMSUNG MZHPU512 2H1Q PQ: 0 ANSI: 5
    [ 0.955003] sd 4:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
    [ 0.955028] sd 4:0:0:0: [sda] Write Protect is off
    [ 0.955030] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.955038] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 0.956407] sda: sda1 sda2 sda3 sda4 sda5
    [ 0.956825] sd 4:0:0:0: [sda] Attached SCSI disk
    [ 0.968695] usb 1-3: new full-speed USB device number 2 using xhci_hcd
    [ 1.302451] usb 1-4: new high-speed USB device number 3 using xhci_hcd
    [ 1.539371] tsc: Refined TSC clocksource calibration: 2494.224 MHz
    [ 1.646163] usb 1-13: new full-speed USB device number 4 using xhci_hcd
    [ 1.718430] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.821454] usb 1-13: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.972758] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    [ 1.972914] systemd[1]: Detected architecture 'x86-64'.
    [ 1.973342] systemd[1]: Set hostname to <hp_arch>.
    [ 2.046

    Sorry should have mentioned that. Yeah I tried that and it delays the error message a little bit (about 20 seconds after boot vs instantly). In the end it leads to the exact same error though.

  • Is it possible to easily convert an arch setup to a bootable live usb

    Let's say you set up arch just the way you like it and want to turn it into a live usb image kinda like how you download Ubuntu and can have a live usb version....
    Is there an easy one step way of doing this so that all the files, drivers and programs installed can be converted to a live iso image ready to be used with a program such as "universal usb creator". Then you could send it to your friends, take it with you wherever you want or even post it online to inspire others. Archiso seems to want you to add everything manually or just create a minimal image.
    Even if its not a simple click and done procedure is there a way to completely convert an entire arch setup with a desktop environment, background images, programs and so on to a live usb iso version without losing anything? Something like an exact line of commands that can be copied and pasted without altering them that will produce just the result you want every time?
    Thanks so much in advance for your help

    12padams wrote:I know with archiso you have that package list which you can write down all the programs you want included but what If I want everything that's installed currently to be added rather than adding it all myself?
    You can get the full list of installed packages with pacman -Qq. Depending on what's in the package list by default, you may even redirect pacman's output to the package list (something like pacman -Qq > /path/to/package/list).
    12padams wrote:Also lets say I wanted all video drivers installed so it will work on a huge range of computers... how would I do this? I remember just wanting to install NVidia and nothing else yet that one package had driver conflicts and archiso refused to compile it.
    The most likely case for this would be installing both the open source driver and the proprietary one. You can only have one of those two installed (the same applies to the ati drivers). Apart from that limitation you can simply install every xf86-video-* package you might want or need.

Maybe you are looking for

  • Efficiently retrieving only a set of records ... ?

    Hi, Ours is web centric small-scale ERP. We have lot of reports which display data by pages. While retrieving records we are using the following type of SQLs: select col1,col2,.... from ( select rownum srno, col1, col2, ... from tables where ...) whe

  • Creating System Restore Points in Windows Server 2012

    Searching for "Create a restore point" on Windows Server 2012, brings up a link that when clicked takes you to System Properties. Once there, there is no System Protection tab or option to create a system restore point. Windows Server Backup is insta

  • About setup tables

    hi experts happt new year to u all in advance. i want o know that weither their wil set up tables in fi/sl & copa extraction . and for what this set up tables meant for. plz send answers to my mail id kalyan11069@gmail with regerds, lakshmi raj.

  • Exporting to .mpg with multiplexing ... keeps setting to "none"

    Folks, I need a single file with audio & video into 1.  It needs to be an mpg. At this moment, all I get from Premiere Elements (8) is an .m2v file and an .mpa I read that I need to set multiplexing to something other than "none" for them to merge. B

  • Want to learn Report Painter.

    Dear All, Can anyone tell me what Report painter is and how is it useful and how to use, Also the PROS & CONS in respect to the standard Classical/Interactive/ALV/Query reports. Waiting for your valuable feedback. Thankx Raj