NVIDIA - GeForce GTX 660 Ti 2GB GDDR5 PCI Express 3.0 Graphics Card

How difficlut is it to replace a grphic card in a HP P6210Y

Here are the specs for your HP Pavilion p6210y Desktop Computer. According to the specs, this model has a PCIe x16 graphics card slot and a 300 watt power supply. In theory, the computer's PCIe x16 slot is v2.0 and a PCIe x16 v3.0 graphics card should work in this slot. You will need an open space next to the PCIe x16 slot to accomodate the GTX 660 Ti. Please see "Adding or Replacing an Expansion Card (Video Card, Sound Card, etc...)" for instructions on installing a graphics card in your computer.
You will also need to replace the power supply with a unit rated to work with your new graphics card. It appears the minimum system power supply requirement for the GTX 660 Ti series of cards is 600 watts. Please consider the Corsair CX600 or CX600M for your power supply needs. The Corsair CX600M is modular, which allows for better cable management and air flow in the HP case. Please see "Replacing the Power Supply" for instructions on installing a new power supply in your computer.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

I am looking at buying a new iMac but not sure if I need the Nvidia Geforce GTX 680 MX 2GB or put the money into Memory I will not be gaming

I am looking at buying a new iMac but not sure if I need the Nvidia Geforce GTX 680 MX 2GB or put the money into Memory I will not be gaming
New to the iMac and apple

Welcome to the Apple Support Communities
If you aren't going to use your Mac for anything special (Final Cut, Aperture, Photoshop, games...), you don't need that graphic card and you will save money.
Also, as it looks like you are going to buy the 27-inch iMac, I recommend you to buy the Mac with 8 GB of memory, and then, buy the memory that your iMac needs in OWC or Crucial (the iMac supports 32 GB of RAM) > http://eshop.macsales.com/shop/memory/iMac/2012_27/DDR3L
Doing this, you will save a lot of money. Also, it won't void the warranty of the Mac. If you need help installing the RAM, see > http://support.apple.com/kb/ht5540

NVIDIA GeForce GTX 660 - xrandr always sees HDMI disconnected

I have a desktop PC running Arch Linux and my issue is that xrandr always reports the HDMI as disconnected,
when it's actually connected to the TV.
There doesn't seem to be anything wrong with the card (the HDMI output worked under Windows).
From lspci:
01:00.0 VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 660] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK106 HDMI Audio Controller (rev a1)
Output of xrandr:
Screen 0: minimum 8 x 8, current 2048 x 1152, maximum 16384 x 16384
DVI-I-0 disconnected primary (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DVI-D-0 connected 2048x1152+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
2048x1152 59.91*+
1680x1050 59.95
1440x900 59.89
1280x1024 60.02
1280x960 60.00
1280x800 59.81
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
DP-1 disconnected (normal left inverted right x axis y axis)
And the output remains the same whether or not the HDMI is disconnected.
I've tried using nouveau and the binary NVIDIA driver, I experience the same issue with both.
I've tried booting with HDMI plugged in and the TV set to the correct input, no difference.
I've tried booting with only the TV plugged in (no desktop monitor on DVI), that also made no difference (with the HDMI).

lbrown wrote:
systemctl
● systemd-modules-load.service loaded failed failed Load Kernel Modules
Well, that unit has failed. Anything interesting in the journal?

Can I install a Nvidia GeForce GTX 660 into my HP laptop?

Hi I was wondering if I could possibly install a new graphics card into my HP laptop? My laptop is a HP 15-d051sa 15.6" so you can search it up on Google.
My specs:
RAM: 8gb
HDD: 1TB
Processor: Intel(R) Pentium(R) CPU N3510 2Ghz (2mb cache)
Graphics: Intel HD Graphics
I think they're all the specifications I need to mention for you guys to help me.
-Thanks Zack.
This question was solved.
View Solution.

No it cannot be done. The video system is part of the motherboard and cannot be changed. Even if you were to change to the best HP 15 motherboard it has graphics much less powerful than the GTX 660 and the motherboard swap would cost as much as the laptop did to begin with.

UEFI GOP for MSI Geforce GTX 660 OC 2GB

Hi!
I would like to know if there is an update for my Geforce 660 OC, which would enable EUFI GOP (and Windows 8 Fast Boot!).
S/N is : 602-V287-09SB1301050480
Bios Version is currently 80.06.28.00.3A according to GPU-Z...
Thanks a lot!

Follow >>GOP / UEFI Vbios requests - Read Here First<< and add a copy of your current vbios.

Update for the NVIDIA GeForce GTX 680MX 2048 MB for MacPro3.1 primo 2008?

Has there been an update for the NVIDIA GeForce GTX 680MX 2048 MB for MacPro3.1 primo 2008?
I have had the MacPro restarts due to internal problems and the fault report going to Apple shows it is the N NVIDIA GeForce GTX creates the problems.
I am running Apple products like Aperture 3.5.1 iTunes 11 etc…
Besides the cresting the overall performance is SLOW
My MacPro:
Running OS X 10.9.1. on the MacPro3.1 primo 2008, 2 x 2,8 GHz Quad-Core Intel Xeon
NVIDIA GeForce GTX 680:
Chipset-model:            NVIDIA GeForce GTX 680
Type:            GPU
Bus:            PCIe
Kortplads:            Slot-1
Bredde på PCIe-kanal:            x16
VRAM (i alt):            2048 MB
Producent:            NVIDIA (0x10de)
Enheds-id:            0x1180
Revision-id:            0x00a2
ROM-revision:            3731
Skærme:
CG246:
Opløsning:            1920 x 1200
Pixeldybde:            32 bit farve (ARGB8888)
Dublering:            Fra
Online:            Ja
Rotation:            Understøttet
Cintiq 12WX:
Opløsning:            1280 x 800 @ 60 Hz
Pixeldybde:            32 bit farve (ARGB8888)
Skærms serienummer:            8HC000414
Hovedskærm:            Ja
Dublering:            Fra
Online:            Ja
Rotation:            Understøttet
Please advise :-)
/ Kim Andersen

Dear Ms. Andersen:
Evga handles GeForce GTX 680 MX. Apple has nothing to do with it. However, I can try to help you a little bit
go here for Evga's Mac support: http://www.evga.com/support/download/default.aspx
This is one of those video cards that needs 2 power cables connected to the mother board for it to work propertly. It needs 195 watts of power, which the PCI-E slot will not provide on its own. If you have the power cables connected up okay, then the only advice I can give you is to telephone EVGA and see about a possible replacement. Apple's policy, as I understand it, is to replace same with same, even if you have the money and are willing to pay extra. This is a 3rd party video card and as such, Apple is not responsible for any problems wth it. I don't understand either: based on my knowledge of Norwegian, your screen size is 1280x800 and your bit depth is 32 bit, and you have 2 gigs Vram, so you should have no problem.
maybe you have a bad card
good luck to you
JOhn b

New iMac NVIDIA GeForce GTX 775M (GPU NOT Detected)

I have The New Imac With NVIDIA GeForce GTX 775M with 2GB and in PREMIERE CC I have CUDA detected but in After Effects CS6 (11.03) latest Update until now, dosent detect GPU it says its not compatible, and uses OpenGL and the CUDA area is Grayed out,. why does Premiere pro cc recognizes my card and After Effects wont,. I did the sniff thing up in Terminal and added my card in the list and , still nothing,. can someone, please help me understand this,.

> I have The New Imac With NVIDIA GeForce GTX 775M with 2GB and in PREMIERE CC I have CUDA detected but in After Effects CS6 (11.03) latest Update until now, dosent detect GPU it says its not compatible, and uses OpenGL and the CUDA area is Grayed out,. why does Premiere pro cc recognizes my card and After Effects wont,.
That card was not tested with After Effects CS6 (11.0). That card didn't even exist when After Effects CS6 (11.0) was being developed and tested.
See this page for details of changes for After Effects CC (12.1) regarding GPU usage:
http://adobe.ly/AE_CC_12dot1_GPU

Can HP Workstation z600 support Nvidia Gefore GTX 660 ti?

Hi every one,
I have a HP Workstation z600 and I install a Nvidia Geforce GTX 660 ti video card into it. I used for 4 months without problems, but last week when I was using the computer this shut down by him self and a red light comes with 4 beep sounds; Additionally, the power supply green light does not do anything. I check on internet about that problem and what I found was that this is because the power supply is dead.
I suspect my video card burned my power supply, because the power supply is only for single 6 pin of power and the video card that I have is for two-6 pin of power. My video card works on a single 6 pin of power supply, because I adapted an extra Molex connector in my card. I check on interet about which video card are supported by my computer and I found the Nvidia Quadro 5000 and Nvidia Quadro k5000 are good for my computer.
The thing is, I want to know if Z600 can really support the GTX 660 ti? I am worrying because I do not want to buy another power supply for my computer and this can burned again.
Here are some photos of how I connected my video card to my computer.

Hi:
According to the specs for the z600, it has a 650W power supply and the GTX660 ti requires a 450W power supply, so theoretically, the card should not have blown the P/S.
You may also want to post your question on the HP Business Support Forum -- z Workstations section.
http://h30499.www3.hp.com/t5/Workstations-z-series-xw-series/bd-p/bsc-272#.U5nJ2f1OXGg

MSI P67A-C43 B3 and MSI GeForce GTX 660 2GB GDDR5 Twin Frozr III N660 TF 2GD5/O

will MSI GeForce GTX 660 2GB GDDR5 Twin Frozr III work on MSI P67A-C43 B3 ???

Yes.
Make sure you have an adequate power supply.

Does cc support Asus Nvidia GeForce GTX 780 Ti DirectCU II OC 3GB GDDR5 Graphics Card

hi, does cc support Asus Nvidia GeForce GTX 780 Ti DirectCU II OC 3GB GDDR5 Graphics Card?

CC what?
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

MSI Geforce GTX 660 TF 2GD5/OC and Asus problems

Hi there,
just bought a MSI Geforce GTX 660 TF 2GD5/OC with and Asus M5A99X EVO R2.0 mainboard. Installed Windows 7 x64 without any problems. All the drivers work but when I try to install the Nvidia drivers it just says there isn't a compatible graphics card available. Upgrade my motherboards BIOS to 1708 which is the latest one. Still didn't make it work. Hope that anybody can help me because I want to start gaming!
Regards!

Graphics: MSI Nvidia 660 TF 2GB DDR5
CPU: AMD FX-8350 8x 4GHZ L2 8MB L3 8MB
Display: Iiyama ProLite E2280HS-B1
Power supply: OCZ ZT750W
Case: Sharkoon T9 Value black edition
Optical drive: Samsung SH-224BB/BEBE
Input: Logitech MK710 WL Desktop
Mainboard: ASUS M5A99X EVO R2.0 6x USB2 2x USB3 6x SATA GB lan
Bios: 1708
Harddisk: Western Digital WD2002FAEX 2 TB
Memory: 2x G.Skill 8 GB DDR3-1600 Kit
OS: Windows 7 x64

Nvidia GeForce GTX 485M GPU - Anyone Used It?

I'm about to pull the trigger on a new Sager laptop for CS5.5 MC.
I have the options for the Nvidia GeForce GTX 485M GPU with 2GB GDDR5 Video Memory, or the Nvidia Quadro FX 3800M Graphics with 1GB DDR3 Video Memory. The difference is ~ US$500, and pays for a bunch of other options.
Unless it has just been updated, the GTX 485M is not directly supported for hardware MPE, but I assume that by applying the hack for that card, it should work. Does anyone have experience with that less-expensive card?
My old workstation (soon to be replaced too), has a Quadro FX-4500, which has been a stout card for years, however was crazy expensive, and I never have really put it to the test, considering what I do.
If I have to go with the FX 3800M, then so be it, but I'd rather buy more toys.
Thanks for your observations and thoughts,
Hunt
PS - I know that Sager's biggest market is the gaming world, but it is getting harder to get a top-level laptop without SLI for dual-nVidia cards/chips, or Crossfire for the ATI/AMD. As soon as I take delivery, Adobe will probably announce that PrPro NOW fully supports SLI, but I'll live with it.

Hey, it would not be the first time, that I was the "new kid on the block," with something, but not lately...
Will probably go with it, and then run the Benchmark, just to get it listed. The Quadros are nice, BUT not sure that the laptop would really benefit from one, and especially to the tune of + US $ 500.
Thanks,
Hunt

H97 Gaming 3 MS-7918 vs. Nvidia Geforce GTX 750 TI

Hellou Hellou
Firstly my Speccs_
Motherboard:
H97 Gaming 3 MS-7918
msi.com/product/mb/H97-GAMING-3.html#hero-specification
Graphic Card
Nvidia Geforce GTX 750 TI
msi.com/product/vga/N750Ti-TF-2GD5OC.html#hero-specification
Is this two Supported i mean is that Motherboard Supported to my Graphic Card.
I mean that PCI 16X 3.0 Express thing.
Because i have impossible to get those to work? The game Crashes when i am playing and it's very laggish and pixels are messed.
Motherboard is NEW and Graphic Card is 1-2 months old.
I have tryet everything. New drivers to old drivers.
So is the Graphic card broken or is it that Motherboard is not supporting that Graphic Card?
Thank you very muh from Finland

Oookkey good to know this that it's supported.
Then i think that Graphic card is broken. Have to send it back to the shop where i bought it and get new one.
Problem was that the Graphic card is not working. It's crashing when playing games or starting to play games.
Some times there comes message " nvidia kernel mode driver stopped responding "
Comes black screen, but i can go to desktop ctrl alt delete to shut down the game.
Right now i use older Graphic card "Geforce GTX 460" and it's working very good with the mother board.
Or it's possible, that i have do something to the graphic card to get it to work. Overclocking or something, because the Default settings aren't working.. because right know it's not handelling the job :D

Can a Packard Bell Aspire M3802/M5802 support a nVidia GeForce GTX 750?

Hi. I have a Packard Bell Aspire M3802/M5802. It has an Acer motherboard (G43T-AM), 8gb ram (ddr2, 800mHz), an Intel CPU (Q8300 quad core 2,5GHz @2,5GHz, don't remember the clock).So my question is: can this PC handle a nVidia GeForce GTX 750?

Black_Bullet,
The GeForce GTX 750 uses PCI Express 3.0, the AM-3802 and AM-5802 both have PCI Express 2.0; but it should work since the PCI Express slots are backwards compatible. The only issue I can see would be that the BIOS would not support the card itself.
From what I can tell we only received one BIOS so I would reccomend you get a video card with legacy mode/switch or rom option. The MSI GTX-750 Ti has dual BIOS so you can do EFI/LEGACY, http://www.amazon.com/MSI-Computer-Corp-N750TI-2GD5/dp/B00I6DLIB8, if that helps.

Installing NVIDIA GeForce GTX 780 problem

I have QU297AA#ABG h8- 1130a as bought from retail and planned to do some upgrades. I purchased the NVidia GeForce GTX 780 Graphics Card and was told I would also need a 600W or better power supply, so I also purchased a 750W one. I have installed everything correctly (to my knowledge) and when I try to boot up the PC, it reaches the welcome screen which is blue and with the HP logo asking me to "press escape for startup menu". That does not work and the PC then beeps 4 times with long pauses in between before changing to a black screen at which I have to hard shut down the PC.
I know that the power supply is fine becuase when I saw back to the graphics factory card, it is fine. I have read a lot of support FAQs and they have told me to update the BIOS and to uninstall my old graphics driver. I have done both and the problem still persists. I have upgraded my BIOS from AMI 7.09 22/7/2011 to AMI 7.12 12/10/2011 which was the latest available.
According to the EVGA manual, the beeping sounds are from one of the following:
1. The card is not seated properly (unlikely).
2. There is a problem with the motherboard's graphic card slot (impossible, as the other one works).
3. Supplemental PCI-E power is not connected to the graphics card (it most definetely is).
4. Graphics card problem (unlikely, it is brand new).
It then says the problem is probably with the motherboard and to contact you.
I hope this has been enough information but I would like to know all of my options.

BossClock wrote:
Video Card is EVGA GeForce GTX 780.
PSU is Thermaltake SMART 750W.
Motherboard is Chicago - IPISB CH2.
OS is Windows 7.
I will take a look at the specs on your MOBO o see which PCIe spec the slot is. The specs don't state the version. I will have to ask an HP internal source. It may take a day for me to get back to you, but as soon as I know, you will as well.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

NVIDIA - GeForce GTX 660 Ti 2GB GDDR5 PCI Express 3.0 Graphics Card

Similar Messages

Maybe you are looking for