NVIDIA GeForce GTX 660 - xrandr always sees HDMI disconnected

I have a desktop PC running Arch Linux and my issue is that xrandr always reports the HDMI as disconnected,
when it's actually connected to the TV.
There doesn't seem to be anything wrong with the card (the HDMI output worked under Windows).
From lspci:
01:00.0 VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 660] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK106 HDMI Audio Controller (rev a1)
Output of xrandr:
Screen 0: minimum 8 x 8, current 2048 x 1152, maximum 16384 x 16384
DVI-I-0 disconnected primary (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DVI-D-0 connected 2048x1152+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
2048x1152 59.91*+
1680x1050 59.95
1440x900 59.89
1280x1024 60.02
1280x960 60.00
1280x800 59.81
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
DP-1 disconnected (normal left inverted right x axis y axis)
And the output remains the same whether or not the HDMI is disconnected.
I've tried using nouveau and the binary NVIDIA driver, I experience the same issue with both.
I've tried booting with HDMI plugged in and the TV set to the correct input, no difference.
I've tried booting with only the TV plugged in (no desktop monitor on DVI), that also made no difference (with the HDMI).

lbrown wrote:
systemctl
● systemd-modules-load.service loaded failed failed Load Kernel Modules
Well, that unit has failed. Anything interesting in the journal?

Similar Messages

NVIDIA - GeForce GTX 660 Ti 2GB GDDR5 PCI Express 3.0 Graphics Card

How difficlut is it to replace a grphic card in a HP P6210Y

Here are the specs for your HP Pavilion p6210y Desktop Computer. According to the specs, this model has a PCIe x16 graphics card slot and a 300 watt power supply. In theory, the computer's PCIe x16 slot is v2.0 and a PCIe x16 v3.0 graphics card should work in this slot. You will need an open space next to the PCIe x16 slot to accomodate the GTX 660 Ti. Please see "Adding or Replacing an Expansion Card (Video Card, Sound Card, etc...)" for instructions on installing a graphics card in your computer.
You will also need to replace the power supply with a unit rated to work with your new graphics card. It appears the minimum system power supply requirement for the GTX 660 Ti series of cards is 600 watts. Please consider the Corsair CX600 or CX600M for your power supply needs. The Corsair CX600M is modular, which allows for better cable management and air flow in the HP case. Please see "Replacing the Power Supply" for instructions on installing a new power supply in your computer.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Can I install a Nvidia GeForce GTX 660 into my HP laptop?

Hi I was wondering if I could possibly install a new graphics card into my HP laptop? My laptop is a HP 15-d051sa 15.6" so you can search it up on Google.
My specs:
RAM: 8gb
HDD: 1TB
Processor: Intel(R) Pentium(R) CPU N3510 2Ghz (2mb cache)
Graphics: Intel HD Graphics
I think they're all the specifications I need to mention for you guys to help me.
-Thanks Zack.
This question was solved.
View Solution.

No it cannot be done. The video system is part of the motherboard and cannot be changed. Even if you were to change to the best HP 15 motherboard it has graphics much less powerful than the GTX 660 and the motherboard swap would cost as much as the laptop did to begin with.

Can HP Workstation z600 support Nvidia Gefore GTX 660 ti?

Hi every one,
I have a HP Workstation z600 and I install a Nvidia Geforce GTX 660 ti video card into it. I used for 4 months without problems, but last week when I was using the computer this shut down by him self and a red light comes with 4 beep sounds; Additionally, the power supply green light does not do anything. I check on internet about that problem and what I found was that this is because the power supply is dead.
I suspect my video card burned my power supply, because the power supply is only for single 6 pin of power and the video card that I have is for two-6 pin of power. My video card works on a single 6 pin of power supply, because I adapted an extra Molex connector in my card. I check on interet about which video card are supported by my computer and I found the Nvidia Quadro 5000 and Nvidia Quadro k5000 are good for my computer.
The thing is, I want to know if Z600 can really support the GTX 660 ti? I am worrying because I do not want to buy another power supply for my computer and this can burned again.
Here are some photos of how I connected my video card to my computer.

Hi:
According to the specs for the z600, it has a 650W power supply and the GTX660 ti requires a 450W power supply, so theoretically, the card should not have blown the P/S.
You may also want to post your question on the HP Business Support Forum -- z Workstations section.
http://h30499.www3.hp.com/t5/Workstations-z-series-xw-series/bd-p/bsc-272#.U5nJ2f1OXGg

[BUG] Photoshop CC crashed immediately after selecting NVIDIA GeForce GTX 680M GPU

I just started using Photoshop CC trial and I immediately ran into problem with my video card.
First Photoshop doesn't recognized my GPU which is Nvidia GTX 680M. I'm using a new Alienware R4 with Win8 pro, I then searched the forum and followed this thread
Photoshop CS6 doesn't recognize my NVIDIA GeForce GTX 675M GPU?http://forums.adobe.com/thread/1157982
After following the instruction now Photoshop CC is supposely using my NVIDIA GPU, but it immediately crashed after launching, for both 32 bits and 64 bits. My NVIDIA driver version is 320.49 600 series, the latested one I just updated. If I deselect the NVIDIA option in the control panel I no longer suffer the crash problem but as you know there is a reported problem with Intel HD4000 integrated GPU where screen flickering keeps happening if you use a toolbox. To avoid the problem the only thing I can do is to deselect the use GPU option in CC option (changing the mode advanced setting doesn't help). By deselcting the GPU option get rid of the problem but there is another problem with zooming: it cannot zoom in real time anymore, instead it's having a toolbox where you choose a reagion and it will jump to that region, and I can only zoom in by doing this, not zooming out.
So basically I had a problem with NVIDIA which crashes CC immediately and a problem with Intel HD4000 integrated GPU with flickering screen and another problem with no GPU selected where I cannot zoom in real time. Whatever I do always give me some sets of problem that I can't solve.
BTW I haven't try CS6 yet, I may proceed to download a trial copy and I thought CC and CS6 are using the same core. Nevertheless, those problem should definately be looked into.
Any helps? Thanks in advance.

If you check that user's Profile, you'll discover it is not actually nVidia per se
Profile
Username:              Sora
Age:                       7 ¾
Favourite activity: Playing computer games
Spots:                    In abundance
Ambition:               To have a clue
For what it’s worth, I have most of the CC apps installed on an MSI GT70 ONE with GTX680M — driver 9.18.13.614 dated 8/28/2012 and using Windows 8, and while I have not used them all on that laptop, the ones I have appear to be working faultlessly.

MSI Geforce GTX 660 TF 2GD5/OC and Asus problems

Hi there,
just bought a MSI Geforce GTX 660 TF 2GD5/OC with and Asus M5A99X EVO R2.0 mainboard. Installed Windows 7 x64 without any problems. All the drivers work but when I try to install the Nvidia drivers it just says there isn't a compatible graphics card available. Upgrade my motherboards BIOS to 1708 which is the latest one. Still didn't make it work. Hope that anybody can help me because I want to start gaming!
Regards!

Graphics: MSI Nvidia 660 TF 2GB DDR5
CPU: AMD FX-8350 8x 4GHZ L2 8MB L3 8MB
Display: Iiyama ProLite E2280HS-B1
Power supply: OCZ ZT750W
Case: Sharkoon T9 Value black edition
Optical drive: Samsung SH-224BB/BEBE
Input: Logitech MK710 WL Desktop
Mainboard: ASUS M5A99X EVO R2.0 6x USB2 2x USB3 6x SATA GB lan
Bios: 1708
Harddisk: Western Digital WD2002FAEX 2 TB
Memory: 2x G.Skill 8 GB DDR3-1600 Kit
OS: Windows 7 x64

NVidia Geforce GTX Titan compatibility

Right now I'm using CS5 and want to upgrade to CS6. I would much rather upgrade my card and my software rather than just the video card. Before I buy the new nVidia Geforce GTX Titan for my system, I would like to know it will be compatible. I haven't seen it on the list of suggested cards, but it is fairly new. It seems to be the card to get, but the Quadro 6000 is what is recommended. The specs for the 6000 seems to be far lower (by over half) than the Titan, so I am not sure why I would buy it, except that it is definitely compatible with other nVidia Pro Video cards. I don't use SDI since I am using cards to shoot video and I use my computer for Post-Production. I also use Blender 2.66 for 3D design and animation in conjunction with AE and Premiere to clean up, edit and render out video. I am using a Quadro FX 5800 for my video card, but it is quickly becoming a dinosaur, which is pretty amazing to me that it lasted this long in the tech world. I realize this seems like an nVidia question, but it straddles both companies. Since nVidia has worked closely with Adobe for so long, I was just wondering if anyone knows. The Titan seems to run circles around the 6000 for half the price. How I would end up using the Titan would be as an engine and use the 5800 as the display card to allow the card to be maximized.

Just wondering if you read my reply ?
Looks like I can upgrade the memory with 24GB of G. Skill Ripjaw series DDR3 1600 for about $200.
Looks like a good plan.
The i7 can be upgraded to the 990X for about $1000 (and overclocked less than my 950)
and overclocking the 950 to 4.0 - 4.4 GHZ is free, saves you around $ 1000 and is about equally fast.
and the nVidia card upgrade to the Titan for about $1100.
which is absolute overkill on this system. You will not notice the difference with a 660 Ti for around $ 250.
Include the $375 for the upgrade to CS6 and I'm under $2700.
AFAIK the upgrade from CS5.5 to CS6 is $ 525 in the US and around $ 900 in Europe.
If you follow my advise, the total cost is $ 200 + $ 0 + $ 250 + $ 525 = $ 975.
That saving goes a long way for a new system, but you still would have to get that Samsung 840 Pro SSD.

Mercury CUDA not enabling when using NVIDIA GeForce GTX 285 on Apple Mac Pro after Mavericks install

Been using the same setup since CS5 with the Mercury CUDA running perfectly. After recent upgrade of OS X to 10.9 Mercury CUDA is no longer available and only lets me run with the OpenGL or software options. Im using a NVIDIA GeForce GTX 285 for apple computers. Here are the results for the GPUSniffer program in the latest Premiere Pro 7.1.0 files. The LAST line make me chucle because it the first on the list of supported card in the "cuda_supported_cards.txt" file. Anybody else seen this?
--- OpenGL Info ---
Vendor: NVIDIA Corporation
Renderer: NVIDIA GeForce GTX 285 OpenGL Engine
OpenGL Version: 2.1 NVIDIA-8.18.27 310.40.05f01
GLSL Version: 1.20
Monitors: 1
Monitor 0 properties -
   Size: (0, 0, 1920, 1080)
   Max texture size: 8192
   Supports non-power of two: 1
   Shaders 444: 1
   Shaders 422: 1
   Shaders 420: 1
--- GPU Computation Info ---
Found 1 devices supporting GPU computation.
OpenCL Device 0 -
   Name: GeForce GTX 285
   Vendor: NVIDIA (Apple platform)
   Capability: 1.2
   Driver: 1
   Total Video Memory: 1024MB
   * Not enabled by default because it did not match the named list of cards.

found a link from a couple of days ago on a creative cow forum post one of the poster saying they are from adobe stating this
Re: Mercury Playback Engine MacPro
by Peter Garaway on Nov 12, 2013 at 9:49:16 am
Hi Wendell,
Sorry for the inconvenience. NVIDIA is currently working on drivers that support CUDA on Mavericks 10.9 with some of the older NVIDIA cards such as the GTX 285 and the Quadro 4800.
For others interested, the Quadro 4000, K5000 and GTX 680 ect... work with CUDA in 10.9.
Best,
Peter Garaway
Adobe
Premiere Pro
I have latest CUDA drivers, so i guess i am just waiting till a proper update that have the fixes to support my card.

MSi GE70 Apache Pro w/ nVidia GeForce GTX 860M Graphics Issues

Hi there,
I recently purchased an MSi gaming notebook with nVidia GTX 860M graphics. However, just recently I've been having game-breaking issues with textures rendering, artifacts and particles as well as the drivers crashing now and again(desktop flashing and flickering).
I've only had this laptop for just over two months and am quite disappointed with issues coming up already.
To get to the specifics; I have recently been playing through the Mass Effect trilogy and, just the other day, started up a file in Skyrim. The following screenshots show my biggest issues aside from the obviously serious driver crashing issues. I believe the issues started maybe a month into owning this laptop and since it has been getting progressively worse. I feel as though I have been all over the internet trying to find a fix to this, I've tried everything suggested, everything that I could think of, and I am just about ready to have it sent back. I was hoping someone may have some other options before I do send it in.
https://www.dropbox.com/s/d8koa8f8i1z9j3d/Photo%202014-09-30%2C%201%2040%2044%20AM.jpg?dl=0
On the title screen for Mass Effect 3 I get these consistent blue and red glowing orbs, they also occur on several other maps within gameplay.
https://www.dropbox.com/s/a9c47w320u5xylb/Photo%202014-09-30%2C%201%2043%2016%20AM.jpg?dl=0
Once I get in-game, this occurs everywhere. Textures "expanding" off of characters into random points.
https://www.dropbox.com/s/v37un4vespalosx/Photo%202014-09-30%2C%201%2045%2036%20AM.jpg?dl=0
This happens occassionally on characters; ridiculously shadowed faces to the point where they are barely recognisable.
https://www.dropbox.com/s/8cebgs4t10ghnh0/Photo%202014-09-30%2C%201%2046%2020%20AM.jpg?dl=0
On almost all wall textures there are white glowing particles like the ones behind the character here. In extreme cases, the wall becomes a texture of textures. All of the textures in the game are miniaturized into a wall of textures on certain objects.
I've also had signs and the game's menus and interface stretched and skewed all over the place. If I continue to play it with the above issues, the game eventually hangs and I have to alt+tab out and back in, or close it using the task manager. All of these issues also occur in Skyrim and any game using the same, or similar, engines. The only game I have been able to play almost seamlessly without any issues is Ragnarok Online 2, an online MMORPG.
I have tried the following:
nVidia's GeForce Control Panel: any and all combination of options.
Re-installing video drivers.
Re-installing DirectX and PhysX.
Formatting and a fresh install of Windows and all games and drivers.
Any other troubleshooting other forums have provided.
Removing the pagefile for virtual memory limits.
Using Intel HD graphics to test for other issues.
PC/nVidia power settings.
The one time I thought it may be fixed, all it took was me plugging in my laptop to cause the issues all over again. I've tried downloading MSi Afterburner to check GPU temperatures and I rarely even go over 65~70. I'm absolutely out of ideas. It was suggested to me by a family member that it may be a hardware issue, hence the consideration for sending it in.
I'm running Windows 7 64-bit
nVidia GeForce GTX 860M
Intel Core i7-4710HQ CPU @ 2.50GHz
12GB of RAM
Any ideas/help would be greatly appreciated. I would really rather not have to send it back. I've also posted this over at the nVidia forums because I'm -hoping- it's a software issue.
Thanks in advance!

Quote
It was suggested to me by a family member that it may be a hardware issue, hence the consideration for sending it in.
Quote
To me it sounds like a hardware issue (especially if you have rolled back to factory default and reinstalled from scratch)
It wouldn't be a hardware issue since you can play other games without problem.
Easiest way to tell if it's a hardware issue or not is to run the benchmark tool for example 3DMark 11 and see if the problem also happens during the benchmark.
For the rendering problem you were talking, please provide not only the problem picture but also the picture without problem to let us make the comparison.
I'm sorry to say, but some of the picture I'm not really getting what the problem you're talking about.
For the shadow face, here are few user provided fix which might be helpful.
http://forums.steampowered.com/forums/showthread.php?t=2282965
http://forum.bioware.com/topic/55984-shadows-way-too-darkblack-intendedscreenshot-solved/
Quote
Re-installing DirectX and PhysX.
NVIDIA moderator says some of the games is required to play some older Physx games, but not sure if it works.
If you would like to have a try.
https://forums.geforce.com/default/topic/524066/geforce-drivers/official-nvidia-r310-61-beta-display-driver-feedback-thread-released-11-20-12-/post/3714758/#3714758
I'd suggest to post the issue on EA, steam or obioware and see if there are people looking into it.

Problem with Matrox Mini, NVIDIA GeForce GTX 570, Premiere 5.5.2 and After Effects CS5.5

Hello,
We have a couple video workstation PC's in our office.
Premiere and After Effects have been crashing lately with increasing frequency - about every two minutes now.
Here is the setup:
Hardware
Matrox Mini - Matrox Utility release 5.5.1
Nvidia GeForce GTX 570 - Driver release 275.33
Intel Xeon X5660 2.8 GHz processors
24 GB Ram
Software
Adobe CS5.5, specifically...
After Effects 10.5.0.253
Premiere 5.5.2
Windows 7 64-bit
We have two 21" LCD monitors in dual display running from the computer, and the Matrox Mini outputs a preview signal to a 15" CRT.
The crashes occur when I have After Effects and Premiere open at the same time. I am editing in a Matrox 720p29.97 timeline in Premiere. I imported several compositions from AE into Premiere through Dynamic Link and am matching audio with the animations in comps. When I switch back to AE to make an edit in the comp, After Effects generates a crash warning and then gives me the opportunity to save the project under a new name. After saving, it closes down completely. The Matrox WYSIWYG Control Panel in the system tray crashes during AE's crash, disabling the preview to the CRT from Premiere and AE. Since the Premiere sequence is a Matrox preset - in order to have output to the CRT - this freezes the timeline; the video and audio no longer play. When I save and then try to close Premiere, Premiere freezes and will not close without a force quit via the Task Manager.
In order to deal with this temporarily, I am editing in an AVCHD 720p30 sequence preset in Premiere, which doesn't send a preview feed to the CRT, obviously, since it's not a Matrox preset and the CRT is connected via the Matrox Mini. It's more than a minor inconvenience, since I use the CRT for color accuracy.
It is frustrating, since we did not have this problem until the recent CS5.5.2 update. We have tried changing drivers for the GTX 570 and changing the Matrox utility software to other versions, but no luck.
Is there a combination of GTX 570 drivers, Matrox software releases, and AE/Premiere settings that will make this work? I know there are "Known Issue" posts with Nvidia cards on Matrox's website, which include the GTX 570, but, again, this problem started with the Adobe CS5.5.2 update.
Any help here would be great, and I am willing to provide more information about the system and our crashes if it helps find a solution for the community, as I know this is not an isolated problem after reading Nvidia's, Matrox's, and Adobe's forums. I just can't find a hollistic solution on any of the individual manufacturer's forums.
Thank You.
Jordan

I've been running with Matrox for years, starting with the Axio LE. I do 75% broadcast work and find that the Matrox works very well with my kind of workflow. Monitoring is critical and since we have to deal with 3rd. party solutions, Matrox was my pick dating way back to 2006. Sure I've had frustrations with it, but I've made far more money off Matrox than frustration.
   Here's my nearly crash-free setup:
Gigabyte GZ-X58A-OC moboard
Intel 990X (only overclocking to 4.0)
24Gb of Kingston HyperX Ram
GTX580 Graphics Card
Matrox MXO2-LE w/Max
Crucial 240Gb Sata III drive (the one that has a nearly perfect score on Newegg's site)
2 x 2Tb WD Blacks Raid 0
2 x 1Tb WD Blacks Raid 0
Win 7 Ultimatte (it's a high-end version of Windows that's great for keying!)
CS5.5 Suite
Boris Red 5
Boris Continuum Complete 8
Trapcode Shine, Form, 3d Stroke, Starglow, and Particular
Optical Flares by Video CoPilot
   The reason I list all of that software, is that it all seems to get along together, including with Matrox! So, I can't say I highly endorse Matrox because I've never tried Black Magic or running an external monitor off of my video card.
    I use After Effects with all sorts of plug ins and rarely have crashes. If I put in a long day I'll have the usual crashes here and there (mainly with PremierePro), but nothing that has required evan a soft reboot of the computer.
   My frustration with Matrox is mainly the delay that often comes with Adobe coming out with a new release and Matrox taking 2 or 3 months to catch up, though when Adobe went from 5 to 5.5, there was no delay at all.
   I think that a lot of the people who trash Matrox probably haven't used a Matrox product in years. But before you listen to me, I must confess that I was an early adopter (and advocate) of SSDs and even today, many people on this forum think they're still a waste of money!
   I'll close by simply saying that I've not left Matrox after 5+ years, but keep in mind I haven't had the bad experiences that so many others seem to have had, but again, perhaps they had those bad experiences long ago.

Photoshop CS6 doesn't recognize my NVIDIA GeForce GTX 675M GPU?

I just bought a brand new Alienware M17x R4 with Windows 8 Pro x64 and Photoshop CS6 won't recognize my NVIDIA GeForce GTX 675M GPU?
I've already updated Windows 8, Photoshop and the Nvidia graphics driver.
Any ideas? I spent so much on a nice graphics card but now it seems PS CS6 can't even use it. It's using the Intel HD4000 instead:
I also tried this: http://forums.adobe.com/message/4545768#4545768
And deleted the settings but that didn't help.
According to this, my graphics card should work, it's a NVIDIA GeForce GTX 675M, which is a 600 series GPU: http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html#tested_cards
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB. Photoshop 13.1 cannot display 3D features if you have less than 512 MB VRAM on your video card.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2012, you can assume that the card will work with Photoshop CS6.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series
I've run out of ideas. Any suggestions?

Okay, I figured it out...duh.
My bad...or rather, Nvidia's bad!
In their app profiler, they set Photoshop to use the "default" settings, which defaults to the integrated graphics. By changing the profile to make it use the discreet graphics, it worked!
This also fixed my issue of the background flashing / flickering.
I know that's a known bug with Windows 8 + AMD (http://helpx.adobe.com/photoshop/kb/image-background-transparent-or-flickers.html)
However, Adobe should look into this same bug occuring with the Intel HD4000 integrated GPU, because this happened with my laptop.
Maybe that bug doesn't occur on systems that only have an integrated GPU, but on systems with Optimus, it's definitely a reproducible issue.
When I switch back to integrated, the issue pops up again.
It's nice that Nvidia provides an option for us to either use the integrated or discreet graphics, however, Adobe needs to follow through and make sure that Photoshop doesn't wig out when we're using the integrated GPU. Sometimes, your customers need to do work on battery power, so the integrated flickering /flashing /transparent background bug definitely needs to be fixed.
Personally, I can get 6hrs out of this laptop running the integrated GPU, but when I use the discreet, that cuts it down to only 2hrs.

Can I run a NVIDIA GeForce GTX 970?

I posted something similar before but can someone tell me if I have the right cooling, motherboard ect. to run a NVIDIA GeForce GTX 970 graphics card. I have a HP Pavilion 500-319na and the product number is G9B00EA#ABU. I know I need a better power supply which is why is I'm upgrading to 500w. Btw the reason I'm asking is because I have no idea about unscrewing my computer and checking the motherboard and all of that so any help would be appreciated. Thanks.

Hi, You might want to search the forum for "500-319na" as there have been numerous posts with that model.

GOP Vbios for a NVIDIA GeForce GTX 770

Hello,
I am interested in a GOP Vbios for a NVIDIA GeForce GTX 770 ( MSI N770 LIGHTNING LE), on a motherboard MSI Z87-G45 GAMING.
Here is the serial number :
S/N:602-V283-AASB1310087901
Could you provide me the instruction to correctly update it please ?
thanks !
David

here it is attached below
Quote
Could you provide me the instruction to correctly update it please ?
here is the flash guide:
Quote from: flobelix on 27-December-14, 06:50:25
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

Photoshop CS5 and NVIDIA GeForce GTX 295 Crash

My specifications:
Photoshop CS5 (x64)
Windows 7 x64
NVIDIA GeForce GTX 295 (latest v197.45 driver)
Intel i7 920 2.67 GHz
My card is listed as a tested card for CS5 and NVIDIA says this is compatible with CS5, but today after using it, my screen went blank and the display driver recovered itself. It took about 5 minutes until Photoshop CS5 became responsive again and the GPU features were disabled. I am going to try GPU advanced mode and basic mode instead of normal mode to see what happens, but this is a shame that I have issues like this. I also had issues with CS4 like this.
What I did to cause this issue: I clicked" Place.." to place an object and that is when it crashed. It only happens randomly as I use Photoshop. Please NVIDIA or Adobe fix this issue. I love the GPU features and I want to run them, but this crashing is annoying for spending so much on buying this product. I hate to have to pay to contact Adobe technical support, it should be included with the purchase of software!
How to fix this without having to go to basic GPU mode or disabled GPU mode?

function(){return A.apply(null,[this].concat($A(arguments)))}
SteveR From UK wrote:
With my own problems and a keen observer of this thread it making me think that I should stay away from Nvidia cards cards completed and go ATI
It comes down to policies within companies that in some cases we simply cannot know.
For example:
Does nVidia or ATI have a better plan to support cards with new drivers into the future? My experience is that right now, with my particular video card, ATI does a better job of making new features available (and making them work right) than nVidia. Is this based on support policy or simply what the engineers can and can't do? Maybe it's partially a matter of funding.
Who has a better handle on how to develop unified software and keep it working on all a whole family of cards? What is their software quality? I am active on Windows forums, and it sure seemed to take nVidia a lot longer to stabilize their drivers for Windows 7 than ATI.
Who has a better test lab? You can imagine that if one company has a better built/funded/maintained test lab, they're more likely to make new versions of drivers for old cards work properly if they have a computer set aside somewhere with that old card in it just waiting to try out new drivers. Unfortunately you can imagine with these companies making many, many new models all the time that funding that lab (and funding the MAINTENANCE of that lab) could get to be HUGE!
Lastly, how much do Marketing or other greedy business people influence company direction, vs. Engineers? Imagine a Marketing person's thoughts: "Stop making new drivers for that old card; we're not selling those and haven't for a long time. If a person has one and can't run the latest game or graphics software, he'll go buy a new one, and that's more money for us."
By the way, just to get an idea of how many different cards we're talking about, look at the sheer number of models listed in the various lists on this page: http://www.videocardbenchmark.net/
Just food for thought.
-Noel

After effects and NVIDIA GeForce GTX 680 2048 MB

I've installed the NVIDIA GeForce GTX 680 2048 MB on a Mac Pro 3,2 GHz Quad-Core Intel Xeon running OSX 10.9.4 but it seems AE doesn't take advantage of the new hardware and the CUDA technology. The ATI Radeon HD 5770 1024 MB mounted before, went for the same rendering times. Am I missing any setting in the software or isn't the graphic card the perfect choice for fastening my rendering processes?
Ae obviously recognize the Nvidia and the CUDA settings should be ok....
Any Idea?
Andrea

AE only takes advantage of CUDA for ray traced features, which is being phased out. To get the most out of your render times, invest in processing power and RAM. I upgraded to the Titan Black and noticed hardly any difference in my render times. Check out this response given by AE's Todd Kopriva on Sept 24, 2014 at Creative Cow: CUDA does not accelerate : Adobe After Effects

NVIDIA GeForce GTX 660 - xrandr always sees HDMI disconnected

Similar Messages

Maybe you are looking for