Nvidia gt 740m replacement

Is there any way to replace nvidia gt 740m with another graphic card?
This question was solved.
View Solution.

The only laptop that HP ever made with a removable graphics card was the HDX Dragon (to my knowledge)
You card is soldered onto the mother board and can't be upgraded. Sorry.
I have a Dell Alienware laptop with a card that isn't soldered to the MoBo and I checked into an upgrade.
It's now running 2 860m's so up from that are the 980's.
Even if I wanted, the cards for these are very hard to find on their own and they are so expensive that it would be better to simply buy a new machine.
If you're gaming or running an application that requires more video power, a desk top is the way to go.

Similar Messages

NVIDIA GT 740M Code 45

Hi. My graphics card is not being detected, device manager lists NVIDIA GT 740M as a hidden device (have to select show hidden devices to view it), upon going into the device properties it states this:
'Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.'
I'm sure theres nothing wrong with the actual hardware as it's a fairly new system although I'm not ruling this out. I've tried the following: re-installing intel based chipset from HP, manually installing updated driver from nvidia, restoring to an earlier restore point, attempted to roll back the BIOS to F.56 I think - it said my system was incompatible (have no idea why) - attempted to install BIOS F.63 which flashes successfully but then upon restart it says restoring system BIOS, apparently in dxdiag.exe I'm on BIOS F.63 which is really confusing. I'm out of ideas now except for opening the system guts and checking if the hardware has come loose or something.
»HP ENVY TouchSmart 15-j024ea Notebook PC (ENERGY STAR)
Serial Number: (Personal information removed by Moderator)
Product Number: F1X65EA
Any help appreciated.

Hi @LaneyUK
I understand that your GT 740M is showing up as a hidden device with a device manager error code 45. I am happy to help you with this, however as it is such a new system, it may be best to call in to support and make use of your warranty, and avoid anything that could nullify that.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Random Shutoff after nvidia video card replacement

This is pertaining to my Macbook Pro 15.4 inch from 2007 running Lion.
A few years ago this MBP completely crapped out. About a year later I received a notification in the mail about this big nvidia lawsuit that would allow me to have my computer fixed if the lawsuit went through. It did eventually and I got my computer fixed. However since installing Lion I've been having trouble with it randomly shutting off, making that high pitch unwinding sound, the sound it makes when you hold the power button for it to hard shut down. I checked into overheating as that seems to be an issue with Lion and MBP's and I run SMC Fan Control to the max and it still shuts off, even at low (relative) temperatures around 140 F.
The weird thing is, without SMC Fan Control the fans won't ever get cranked up, at all. They stay at 2000 rpm. I figured at this point I could rule out overheating, but that's not possible because when I put my computer on ice packs and keep the internals around 80 degrees it runs like a champ. (I'm sure that will work out great in the long run what with the condensation and all). Anyone have any thoughts? I thought about reapplying thermal paste but the temperatures rarely get above 170 when it shuts off.
Thanks

barfswagon wrote:
This is pertaining to my Macbook Pro 15.4 inch from 2007 running Lion.
Macs as late as 2011 that didn't have Lion preinstalled came with two discs, one with the os x, and the other with applications and the AHT.

NVIDIA Geforce 7900: Replace Cooling

Hello,
I was wondering if it is possible to replace the factory mounted cooling by other cooling system and wether GF7 has the same components layout as the GF6 (you know the chips mounted in an arc on the board)
Thanks,

No i have not,
thats why i ask around so much :p. I'd really like to silence it all up so I can have a nap in front of the Comp.
Only stuff that rises questions to me is that i'll have to dismantle the factory installed fan on top of the gfx card (and a NB heatsink but heck...I can place a waterblock on top of the sink if it wont come of)
Greetings,
Planned Rig:
Case:
AC Ryan Casing Acrylic Black
MB:
Asus P5ND2-SLI Deluxe nForce4 SLI, RAID, GLAN
GFX:
PCI-e GeForce 7900GT Top 256MB
MEM:
PQI 2x1GB DDR2 SDRAM PC5400 CL4.0 Turbo
CPU:
Intel Pentium D 950 3.40GHz FSB800 4MB Box
PSU:
Yesico FL-550 (TMS-2) 550W OR silentMaxx Fanless Watercooled 500W
HDD:
Maxtor DiamondMax 11 400 GB
COOLING:
Probably Koolance RP-1000BK OR Else Cool Masters AQUAGATE
MOD:
SunBeam Chameleon Lighting

HP Envy j120tx with NVIDIA Geforce 740m & Intel HD Graphics 4600

There is some issue with the graphics of my laptop. In normal operations graphics are fine but when it comes to commnand prompts or windows screen the display text is totally blured. i updated the driver too but it didnt work !
PFA

Hello @Ketan_22,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the graphics on your notebook computer operate in a blurred manner when it comes to command prompts and system windows, and I would be happy to assist you in this matter!
First things first, I recommend returning your system back to a restore point before windows and command prompts became fuzzy. This can be done by following this document on Using Microsoft System Restore (Windows 8).
If these windows still appear blurred, the drivers may need to be re-installed. To ensure all of your system's drivers are functioning correctly, you can install the original software and hardware drivers for your computer. To do this, please follow this resource on Using Recovery Manager to Restore Software and Drivers (Windows 8). Once the drivers are installed, please update them by Using HP Support Assistant (Windows 8).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Do NVIDIA GPUs replace or run alongside Intel Iris graphics?

I'm looking to buy a new iMac soon, and performance is key with my purchase. I'm not a big gamer, but I do like a few games here and there. So my question is this, does a NVIDIA GeForce GPU replace the Iris Pro graphics or would the computer run with virtually two GPUs?
I'm pretty good with computers, but I don't know much about how Iris works.
Also, I'm sure I'm not the only one that has asked a question like this, but I didn't know where or what to search. If there are already threads addressing this question, I apologize in advance.
Thanks for reading!

If you get a 27in iMac or upgrade the 21in iMac to the NVIDIA processor that is what is used unless you are booted in Safe Mode. The desktop systems do not switch between the onboard and external graphics card like the laptops do.

Cant install any driver for Hp NVidia gt230 on Touchsmart 600-1055

Last few years I bought a HP Touchsmart oversea when I travelled to US then I brought it back to Australia. First couple months it was fine then one day I turned on the PC then It is just black screen after the window 7 boot screen then restart after few seconds. It keeps repeating that process unless I go to Safe mode and remove its NVidia driver and replace with window standard driver ( Video Controller VGA compatible) then I can boot up the window normally but cant use any program that require the delicated graphic card. I have tried hard to find its driver from every resources that I can find on the internet including Hp website and NVidia webiste but still again no luck. for 3 years I still cant find the driver for this that can make it working. What happened? is it my graphic card physically fault or because the software isusse? I forgot to mention that I even try to use the DVDs that I orders from HP USA and try to factory recovery but it is still having the same issue. I try to install many different version of window in cluding win 7 32&64 bits, Window 8 pro 64 bits then STILL NO LUCK. So could anyone please tell me what happened and how to fix it cause as I am aware that HP australia not support for HP USA product and I dont want to see my expensive desktop become a brick.
Thanks

Hello Trung_Hau_Le,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues where you cannot use the higher end graphics card installed in your HP TouchSmart 600-1055 Desktop PC. The issue you are describing appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
US support link to contact options for HP products purchased in the US.
Outside of US support link to contact options for HP products purchased outside the US.
Now just because you purchased the computer in Australia does not mean your warranty is not good in the US. I am providing you with a link to theHP Global Warranty and FAQs, which states the following:
HP Global Warranty covers HP products at the level of standard warranty offered in the country in which it is used. For example, a product purchased in country "A" and moved to country "B" receives the current warranty coverage provided by country "B" (if that product is marketed or supported in country B)
This means that your computer receives the same treatment in the US as a computer sold in the US. I would recommend you contact HP Technical Support to have your issue addressed.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Trying to switch from nvidia to nouveau; startx freezes system

I'm having high cpu issues, possibly related to nvidia and want to switch to nouveau to test this out. I followed the Arch Wiki for nouveau but am having issues being able to startx. My process:
- Logout of openbox
- Remove nvidia stuff:
# pacman -Rsc nvidia nvidia-utils opencl-nvidia
# pacman -S xf86-video-nouveau
Installing nouveau also prompted the removal of nvidia-libgl and replaced it with mesa-libgl, as well as the installation of nouvea-dri.
- Removed my existing monitor config file:
# mv /etc/X11/xorg.conf.d/10-monitor.conf /etc/X11/xorg.conf.d/10-monitor.conf.bk
- Verified that I have no modeset options specified to kernel options via syslinux, nor blacklisting of nouveau in /etc/modprobe.d/ files.
$ cat /etc/modprobe.d/modprobe.conf
# /etc/modprobe.d/modprobe.conf
blacklist uvcvideo
blacklist pcspkr
$ ls /etc/X11/xorg.conf.d/
10-evdev.conf 10-monitor.conf.bk 10-quirks.conf 50-synaptics.conf
Nothing related to monitors or screens in 10-evdev, 10-quirks or 50-synaptics, and the 10-monitor.conf.bk file has the following contents (just in the event it *is* picked up by Xorg):
$ cat /etc/X11/xorg.conf.d/10-monitor.conf.bk
Section "Monitor"
Identifier "Monitor0"
ModelName "LGD"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
# Option "Enable" "True"
# Option "PreferredMode" "1600x900"
EndSection
Section "Device"
Identifier "Device0"
Driver "nouveau"
# Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro FX 1800M"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x900"
EndSubSection
# Option "SLI" "Auto"
# Option "AddARGBGLXVisuals" "True"
EndSection
- Reboot
I am at work and have my computer docked. Nouveau seemed to be active, observed by the fact that it auto-switched to KMS during boot. It also picked up my external monitor, which was off, and started duplicating the display on my external monitor and laptop during text boot (which nvidia does not do). The laptop had what I'll call "screen artifacts" on the lower right (white lines, jumbled pixels) after switching to KMS, but not a huge deal. I went to startx and it just froze after spitting out the various initialization lines. I have to hard kill and reboot. From there, I uninstall nouveau, re-install nvidia (which replaces mesa-libgl with nvidia-libgl), and reboot again to a working system.
Any suggestions?
Last edited by jwhendy (2013-10-24 16:36:15)

Here's the recent Xorg.log:
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 102.581] X Protocol Version 11, Revision 0
[ 102.581] Build Operating System: Linux 3.11.1-1-ARCH x86_64
[ 102.581] Current Operating System: Linux bigBang 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
[ 102.581] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda3:root ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 102.581] Build Date: 08 October 2013 08:48:10PM
[ 102.581]
[ 102.581] Current version of pixman: 0.30.2
[ 102.581] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 102.581] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 102.582] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 24 19:46:30 2013
[ 102.599] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 102.618] (==) No Layout section. Using the first Screen section.
[ 102.618] (==) No screen section available. Using defaults.
[ 102.618] (**) |-->Screen "Default Screen Section" (0)
[ 102.618] (**) | |-->Monitor "<default monitor>"
[ 102.618] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 102.618] (==) Automatically adding devices
[ 102.618] (==) Automatically enabling devices
[ 102.618] (==) Automatically adding GPU devices
[ 102.666] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 102.666] Entry deleted from font path.
[ 102.666] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 102.667] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 102.667] Entry deleted from font path.
[ 102.667] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 102.667] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 102.667] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 102.667] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 102.667] (II) Loader magic: 0x7fdc20
[ 102.667] (II) Module ABI versions:
[ 102.667] X.Org ANSI C Emulation: 0.4
[ 102.667] X.Org Video Driver: 14.1
[ 102.667] X.Org XInput driver : 19.1
[ 102.667] X.Org Server Extension : 7.0
[ 102.667] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 102.671] (--) PCI:*(0:1:0:0) 10de:0cbc:103c:1521 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 102.671] Initializing built-in extension Generic Event Extension
[ 102.672] Initializing built-in extension SHAPE
[ 102.672] Initializing built-in extension MIT-SHM
[ 102.672] Initializing built-in extension XInputExtension
[ 102.672] Initializing built-in extension XTEST
[ 102.672] Initializing built-in extension BIG-REQUESTS
[ 102.672] Initializing built-in extension SYNC
[ 102.672] Initializing built-in extension XKEYBOARD
[ 102.673] Initializing built-in extension XC-MISC
[ 102.674] Initializing built-in extension SECURITY
[ 102.675] Initializing built-in extension XINERAMA
[ 102.676] Initializing built-in extension XFIXES
[ 102.677] Initializing built-in extension RENDER
[ 102.678] Initializing built-in extension RANDR
[ 102.679] Initializing built-in extension COMPOSITE
[ 102.680] Initializing built-in extension DAMAGE
[ 102.681] Initializing built-in extension MIT-SCREEN-SAVER
[ 102.682] Initializing built-in extension DOUBLE-BUFFER
[ 102.683] Initializing built-in extension RECORD
[ 102.684] Initializing built-in extension DPMS
[ 102.684] Initializing built-in extension X-Resource
[ 102.685] Initializing built-in extension XVideo
[ 102.686] Initializing built-in extension XVideo-MotionCompensation
[ 102.687] Initializing built-in extension XFree86-VidModeExtension
[ 102.688] Initializing built-in extension XFree86-DGA
[ 102.689] Initializing built-in extension XFree86-DRI
[ 102.690] Initializing built-in extension DRI2
[ 102.690] (II) LoadModule: "glx"
[ 102.691] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 102.719] (II) Module glx: vendor="X.Org Foundation"
[ 102.719] compiled for 1.14.3, module version = 1.0.0
[ 102.719] ABI class: X.Org Server Extension, version 7.0
[ 102.719] (==) AIGLX enabled
[ 102.721] Loading extension GLX
[ 102.721] (==) Matched nouveau as autoconfigured driver 0
[ 102.721] (==) Matched nvidia as autoconfigured driver 1
[ 102.721] (==) Matched nv as autoconfigured driver 2
[ 102.721] (==) Matched nouveau as autoconfigured driver 3
[ 102.721] (==) Matched nvidia as autoconfigured driver 4
[ 102.721] (==) Matched nv as autoconfigured driver 5
[ 102.721] (==) Matched vesa as autoconfigured driver 6
[ 102.721] (==) Matched modesetting as autoconfigured driver 7
[ 102.721] (==) Matched fbdev as autoconfigured driver 8
[ 102.721] (==) Assigned the driver to the xf86ConfigLayout
[ 102.721] (II) LoadModule: "nouveau"
[ 102.721] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 102.751] (II) Module nouveau: vendor="X.Org Foundation"
[ 102.751] compiled for 1.14.2, module version = 1.0.9
[ 102.751] Module class: X.Org Video Driver
[ 102.751] ABI class: X.Org Video Driver, version 14.1
[ 102.751] (II) LoadModule: "nvidia"
[ 102.765] (WW) Warning, couldn't open module nvidia
[ 102.765] (II) UnloadModule: "nvidia"
[ 102.765] (II) Unloading nvidia
[ 102.765] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 102.765] (II) LoadModule: "nv"
[ 102.765] (WW) Warning, couldn't open module nv
[ 102.765] (II) UnloadModule: "nv"
[ 102.765] (II) Unloading nv
[ 102.765] (EE) Failed to load module "nv" (module does not exist, 0)
[ 102.765] (II) LoadModule: "vesa"
[ 102.765] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 102.776] (II) Module vesa: vendor="X.Org Foundation"
[ 102.776] compiled for 1.14.0, module version = 2.3.2
[ 102.776] Module class: X.Org Video Driver
[ 102.776] ABI class: X.Org Video Driver, version 14.1
[ 102.776] (II) LoadModule: "modesetting"
[ 102.776] (WW) Warning, couldn't open module modesetting
[ 102.776] (II) UnloadModule: "modesetting"
[ 102.776] (II) Unloading modesetting
[ 102.776] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 102.776] (II) LoadModule: "fbdev"
[ 102.776] (WW) Warning, couldn't open module fbdev
[ 102.776] (II) UnloadModule: "fbdev"
[ 102.776] (II) Unloading fbdev
[ 102.776] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 102.776] (II) NOUVEAU driver
[ 102.776] (II) NOUVEAU driver for NVIDIA chipset families :
[ 102.776] RIVA TNT (NV04)
[ 102.776] RIVA TNT2 (NV05)
[ 102.776] GeForce 256 (NV10)
[ 102.776] GeForce 2 (NV11, NV15)
[ 102.776] GeForce 4MX (NV17, NV18)
[ 102.776] GeForce 3 (NV20)
[ 102.776] GeForce 4Ti (NV25, NV28)
[ 102.776] GeForce FX (NV3x)
[ 102.776] GeForce 6 (NV4x)
[ 102.776] GeForce 7 (G7x)
[ 102.776] GeForce 8 (G8x)
[ 102.776] GeForce GTX 200 (NVA0)
[ 102.776] GeForce GTX 400 (NVC0)
[ 102.776] (II) VESA: driver for VESA chipsets: vesa
[ 102.776] (++) using VT number 1
[ 102.776] (II) [drm] nouveau interface version: 1.1.1
[ 102.777] (WW) Falling back to old probe method for vesa
[ 102.777] (II) Loading sub module "dri2"
[ 102.777] (II) LoadModule: "dri2"
[ 102.777] (II) Module "dri2" already built-in
[ 102.777] (--) NOUVEAU(0): Chipset: "NVIDIA NVA3"
[ 102.777] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 102.777] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 102.777] (==) NOUVEAU(0): RGB weight 888
[ 102.777] (==) NOUVEAU(0): Default visual is TrueColor
[ 102.777] (==) NOUVEAU(0): Using HW cursor
[ 102.777] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 102.777] (==) NOUVEAU(0): Page flipping enabled
[ 102.777] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 102.845] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[ 102.950] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 103.056] (II) NOUVEAU(0): Output DP-2 has no monitor section
[ 103.056] (II) NOUVEAU(0): Output eDP-1 has no monitor section
[ 103.163] (II) NOUVEAU(0): Output DP-3 has no monitor section
[ 103.184] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 103.211] (II) NOUVEAU(0): EDID for output LVDS-1
[ 103.211] (II) NOUVEAU(0): Manufacturer: CMO Model: 1595 Serial#: 0
[ 103.211] (II) NOUVEAU(0): Year: 2009 Week: 12
[ 103.211] (II) NOUVEAU(0): EDID Version: 1.3
[ 103.211] (II) NOUVEAU(0): Digital Display Input
[ 103.211] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 103.211] (II) NOUVEAU(0): Gamma: 2.20
[ 103.211] (II) NOUVEAU(0): No DPMS capabilities specified
[ 103.211] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 103.211] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 103.211] (II) NOUVEAU(0): redX: 0.610 redY: 0.343 greenX: 0.342 greenY: 0.581
[ 103.211] (II) NOUVEAU(0): blueX: 0.162 blueY: 0.083 whiteX: 0.313 whiteY: 0.329
[ 103.211] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 103.211] (II) NOUVEAU(0): Supported detailed timing:
[ 103.211] (II) NOUVEAU(0): clock: 107.8 MHz Image Size: 344 x 193 mm
[ 103.211] (II) NOUVEAU(0): h_active: 1600 h_sync: 1626 h_sync_end 1686 h_blank_end 1892 h_border: 0
[ 103.211] (II) NOUVEAU(0): v_active: 900 v_sync: 909 v_sync_end 919 v_blanking: 949 v_border: 0
[ 103.212] (II) NOUVEAU(0): N156O6-L01
[ 103.212] (II) NOUVEAU(0): CMO
[ 103.212] (II) NOUVEAU(0): N156O6-L01
[ 103.212] (II) NOUVEAU(0): EDID (in hex):
[ 103.212] (II) NOUVEAU(0): 00ffffffffffff000daf951500000000
[ 103.212] (II) NOUVEAU(0): 0c130103802213780a7b959c57579429
[ 103.212] (II) NOUVEAU(0): 15505400000001010101010101010101
[ 103.212] (II) NOUVEAU(0): 0101010101011c2a4024618431301a3c
[ 103.212] (II) NOUVEAU(0): 9a0058c110000018000000fe004e3135
[ 103.212] (II) NOUVEAU(0): 364f362d4c30310a2020000000fe0043
[ 103.212] (II) NOUVEAU(0): 4d4f0a202020202020202020000000fe
[ 103.212] (II) NOUVEAU(0): 004e3135364f362d4c30310a2020001c
[ 103.212] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[ 103.212] (II) NOUVEAU(0): Modeline "1600x900"x60.0 107.80 1600 1626 1686 1892 900 909 919 949 -hsync -vsync (57.0 kHz eP)
[ 103.212] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 103.212] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 103.212] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 103.212] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 103.212] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 103.212] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 103.212] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 103.316] (II) NOUVEAU(0): EDID for output DP-1
[ 103.423] (II) NOUVEAU(0): EDID for output DP-2
[ 103.423] (II) NOUVEAU(0): EDID for output eDP-1
[ 103.530] (II) NOUVEAU(0): EDID for output DP-3
[ 103.550] (II) NOUVEAU(0): EDID for output VGA-1
[ 103.550] (II) NOUVEAU(0): Output LVDS-1 connected
[ 103.550] (II) NOUVEAU(0): Output DP-1 disconnected
[ 103.550] (II) NOUVEAU(0): Output DP-2 disconnected
[ 103.551] (II) NOUVEAU(0): Output eDP-1 disconnected
[ 103.551] (II) NOUVEAU(0): Output DP-3 disconnected
[ 103.551] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 103.551] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 103.551] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1600x900
[ 103.551] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 103.551] (--) NOUVEAU(0): Virtual size is 1600x900 (pitch 0)
[ 103.551] (**) NOUVEAU(0): Driver mode "1600x900": 107.8 MHz (scaled from 0.0 MHz), 57.0 kHz, 60.0 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "1600x900"x60.0 107.80 1600 1626 1686 1892 900 909 919 949 -hsync -vsync (57.0 kHz eP)
[ 103.551] (**) NOUVEAU(0): Driver mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 103.551] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 103.551] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 103.551] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 103.551] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 103.551] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 103.551] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 103.551] (==) NOUVEAU(0): DPI set to (96, 96)
[ 103.551] (II) Loading sub module "fb"
[ 103.551] (II) LoadModule: "fb"
[ 103.551] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 105.504] (II) Module fb: vendor="X.Org Foundation"
[ 105.504] compiled for 1.14.3, module version = 1.0.0
[ 105.504] ABI class: X.Org ANSI C Emulation, version 0.4
[ 105.504] (II) Loading sub module "exa"
[ 105.504] (II) LoadModule: "exa"
[ 105.504] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 105.508] (II) Module exa: vendor="X.Org Foundation"
[ 105.508] compiled for 1.14.3, module version = 2.6.0
[ 105.508] ABI class: X.Org Video Driver, version 14.1
[ 105.508] (II) Loading sub module "shadowfb"
[ 105.508] (II) LoadModule: "shadowfb"
[ 105.508] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 105.518] (II) Module shadowfb: vendor="X.Org Foundation"
[ 105.518] compiled for 1.14.3, module version = 1.0.0
[ 105.518] ABI class: X.Org ANSI C Emulation, version 0.4
[ 105.518] (II) UnloadModule: "vesa"
[ 105.518] (II) Unloading vesa
[ 105.518] (--) Depth 24 pixmap format is 32 bpp
[ 105.521] (II) NOUVEAU(0): Opened GPU channel 0
[ 105.547] (II) NOUVEAU(0): [DRI2] Setup complete
[ 105.547] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 105.547] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 108.224] (II) EXA(0): Driver allocated offscreen pixmaps
[ 108.224] (II) EXA(0): Driver registered support for the following operations:
[ 108.224] (II) Solid
[ 108.224] (II) Copy
[ 108.224] (II) Composite (RENDER acceleration)
[ 108.224] (II) UploadToScreen
[ 108.224] (II) DownloadFromScreen
[ 108.224] (==) NOUVEAU(0): Backing store disabled
[ 108.224] (==) NOUVEAU(0): Silken mouse enabled
[ 108.226] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 108.226] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 108.226] (==) NOUVEAU(0): DPMS enabled
[ 108.226] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 108.228] (--) RandR disabled
[ 142.503] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 142.503] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 142.504] (II) AIGLX: enabled GLX_ARB_create_context
[ 142.504] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 142.504] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 142.504] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 142.504] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 142.505] (II) AIGLX: Loaded and initialized nouveau
[ 142.505] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 159.503] (II) NOUVEAU(0): NVEnterVT is called.
[ 159.532] (II) NOUVEAU(0): Setting screen physical size to 423 x 238
[ 159.532] resize called 1600 900
[ 160.324] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 160.324] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 160.324] (II) LoadModule: "evdev"
[ 160.324] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 160.355] (II) Module evdev: vendor="X.Org Foundation"
[ 160.355] compiled for 1.14.3, module version = 2.8.2
[ 160.355] Module class: X.Org XInput Driver
[ 160.355] ABI class: X.Org XInput driver, version 19.1
[ 160.355] (II) Using input driver 'evdev' for 'Power Button'
[ 160.355] (**) Power Button: always reports core events
[ 160.355] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 160.355] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 160.355] (--) evdev: Power Button: Found keys
[ 160.355] (II) evdev: Power Button: Configuring as keyboard
[ 160.355] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 160.355] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 160.355] (**) Option "xkb_rules" "evdev"
[ 160.355] (**) Option "xkb_model" "pc104"
[ 160.355] (**) Option "xkb_layout" "us"
[ 160.392] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 160.392] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 160.392] (II) Using input driver 'evdev' for 'Video Bus'
[ 160.392] (**) Video Bus: always reports core events
[ 160.392] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 160.392] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 160.392] (--) evdev: Video Bus: Found keys
[ 160.392] (II) evdev: Video Bus: Configuring as keyboard
[ 160.392] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4/event4"
[ 160.392] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 160.392] (**) Option "xkb_rules" "evdev"
[ 160.392] (**) Option "xkb_model" "pc104"
[ 160.393] (**) Option "xkb_layout" "us"
[ 160.393] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 160.393] (II) No input driver specified, ignoring this device.
[ 160.393] (II) This device may have been added with another device file.
[ 160.394] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 160.394] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 160.394] (II) Using input driver 'evdev' for 'Sleep Button'
[ 160.394] (**) Sleep Button: always reports core events
[ 160.394] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 160.394] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 160.394] (--) evdev: Sleep Button: Found keys
[ 160.394] (II) evdev: Sleep Button: Configuring as keyboard
[ 160.394] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 160.394] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 160.394] (**) Option "xkb_rules" "evdev"
[ 160.394] (**) Option "xkb_model" "pc104"
[ 160.394] (**) Option "xkb_layout" "us"
[ 160.395] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 160.396] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[ 160.396] (II) No input driver specified, ignoring this device.
[ 160.396] (II) This device may have been added with another device file.
[ 160.396] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 160.396] (II) No input driver specified, ignoring this device.
[ 160.396] (II) This device may have been added with another device file.
[ 160.397] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 160.397] (II) No input driver specified, ignoring this device.
[ 160.397] (II) This device may have been added with another device file.
[ 160.397] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 160.397] (II) No input driver specified, ignoring this device.
[ 160.397] (II) This device may have been added with another device file.
[ 160.398] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 160.398] (II) No input driver specified, ignoring this device.
[ 160.398] (II) This device may have been added with another device file.
[ 160.398] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event10)
[ 160.398] (II) No input driver specified, ignoring this device.
[ 160.398] (II) This device may have been added with another device file.
[ 160.399] (II) config/udev: Adding input device HDA Intel MID Dock Headphone (/dev/input/event7)
[ 160.399] (II) No input driver specified, ignoring this device.
[ 160.399] (II) This device may have been added with another device file.
[ 160.399] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event8)
[ 160.399] (II) No input driver specified, ignoring this device.
[ 160.399] (II) This device may have been added with another device file.
[ 160.400] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event9)
[ 160.400] (II) No input driver specified, ignoring this device.
[ 160.400] (II) This device may have been added with another device file.
[ 160.400] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 160.400] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 160.401] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 160.401] (**) AT Translated Set 2 keyboard: always reports core events
[ 160.401] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 160.401] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 160.401] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 160.401] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 160.401] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 160.401] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 160.401] (**) Option "xkb_rules" "evdev"
[ 160.401] (**) Option "xkb_model" "pc104"
[ 160.401] (**) Option "xkb_layout" "us"
[ 160.402] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event11)
[ 160.402] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 160.402] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 160.402] (**) PS/2 Generic Mouse: always reports core events
[ 160.402] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event11"
[ 160.402] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[ 160.402] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[ 160.402] (--) evdev: PS/2 Generic Mouse: Found relative axes
[ 160.402] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[ 160.402] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[ 160.402] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 160.402] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 160.402] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 160.402] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 10)
[ 160.402] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[ 160.402] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 160.403] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 160.403] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 160.403] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 160.403] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
[ 160.403] (II) No input driver specified, ignoring this device.
[ 160.403] (II) This device may have been added with another device file.
[ 160.403] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[ 160.403] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 160.403] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 160.403] (II) LoadModule: "synaptics"
[ 160.403] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 160.415] (II) Module synaptics: vendor="X.Org Foundation"
[ 160.415] compiled for 1.14.1, module version = 1.7.1
[ 160.415] Module class: X.Org XInput Driver
[ 160.415] ABI class: X.Org XInput driver, version 19.1
[ 160.415] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 160.415] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 160.415] (**) Option "Device" "/dev/input/event17"
[ 160.503] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 160.503] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5600 (res 57)
[ 160.503] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4884 (res 123)
[ 160.503] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 160.503] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 160.503] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
[ 160.503] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 160.503] (**) Option "VertScrollDelta" "250"
[ 160.503] (**) Option "VertTwoFingerScroll" "on"
[ 160.504] (**) Option "HorizTwoFingerScroll" "off"
[ 160.504] (**) Option "TapButton1" "1"
[ 160.504] (**) Option "TapButton2" "2"
[ 160.504] (**) Option "TapButton3" "3"
[ 160.504] (**) Option "CoastingSpeed" "0"
[ 160.504] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 160.504] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 160.530] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input17/event17"
[ 160.530] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 160.530] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 160.530] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 160.530] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[ 160.531] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 160.531] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 160.531] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 160.531] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 160.531] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 160.531] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 160.531] (II) No input driver specified, ignoring this device.
[ 160.531] (II) This device may have been added with another device file.
[ 160.532] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[ 160.532] (II) No input driver specified, ignoring this device.
[ 160.532] (II) This device may have been added with another device file.
[ 160.532] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 160.532] (II) No input driver specified, ignoring this device.
[ 160.532] (II) This device may have been added with another device file.
[ 160.533] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event12)
[ 160.533] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 160.533] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 160.533] (**) HP WMI hotkeys: always reports core events
[ 160.533] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event12"
[ 160.533] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 160.533] (--) evdev: HP WMI hotkeys: Found keys
[ 160.533] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 160.533] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event12"
[ 160.533] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[ 160.533] (**) Option "xkb_rules" "evdev"
[ 160.533] (**) Option "xkb_model" "pc104"
[ 160.533] (**) Option "xkb_layout" "us"
[ 164.083] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 164.083] (II) NOUVEAU(0): NVLeaveVT is called.
[ 181.123] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 181.123] (II) NOUVEAU(0): NVEnterVT is called.
[ 181.179] (II) NOUVEAU(0): EDID vendor "CMO", prod id 5525
[ 181.179] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 181.179] (II) NOUVEAU(0): Modeline "1600x900"x0.0 107.80 1600 1626 1686 1892 900 909 919 949 -hsync -vsync (57.0 kHz eP)
[ 181.517] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 181.517] setversion 1.4 failed
(EE) [mi] EQ overflowing. Additional events will be discarded until existing events are processed.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x3d) [0x57f67d]
(EE) 1: /usr/bin/X (mieqEnqueue+0x22b) [0x5615bb]
(EE) 2: /usr/bin/X (QueueKeyboardEvents+0x52) [0x44d452]
(EE) 3: /usr/bin/X (xf86PostKeyboardEvent+0x44) [0x483e84]
(EE) 4: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f4f79e94000+0x5591) [0x7f4f79e99591]
(EE) 5: /usr/bin/X (0x400000+0x73da8) [0x473da8]
(EE) 6: /usr/bin/X (0x400000+0x9c330) [0x49c330]
(EE) 7: /usr/lib/libpthread.so.0 (0x7f4f7f8af000+0xf870) [0x7f4f7f8be870]
(EE) 8: /usr/lib/libc.so.6 (ioctl+0x7) [0x7f4f7e9eef17]
(EE) 9: /usr/lib/libdrm.so.2 (drmCommandWrite+0x5d) [0x7f4f8055e9fd]
(EE) 10: /usr/lib/libdrm_nouveau.so.2 (nouveau_bo_wait+0x8a) [0x7f4f8058446a]
(EE) 11: /usr/lib/xorg/modules/drivers/nouveau_drv.so (0x7f4f7d349000+0x716b) [0x7f4f7d35016b]
(EE) 12: /usr/lib/xorg/modules/libexa.so (0x7f4f7cd05000+0xb308) [0x7f4f7cd10308]
(EE) 13: /usr/bin/X (0x400000+0x170563) [0x570563]
(EE) 14: /usr/bin/X (0x400000+0xc0f95) [0x4c0f95]
(EE) 15: /usr/bin/X (0x400000+0x104193) [0x504193]
(EE) 16: /usr/bin/X (0x400000+0x373be) [0x4373be]
(EE) 17: /usr/bin/X (0x400000+0x2693a) [0x42693a]
(EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f4f7e932bc5]
(EE) 19: /usr/bin/X (0x400000+0x26c81) [0x426c81]
(EE)
(EE) [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
(EE) [mi] mieq is *NOT* the cause. It is a victim.
(EE) [mi] EQ overflow continuing. 100 events have been dropped.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x3d) [0x57f67d]
(EE) 1: /usr/bin/X (QueueKeyboardEvents+0x52) [0x44d452]
(EE) 2: /usr/bin/X (xf86PostKeyboardEvent+0x44) [0x483e84]
(EE) 3: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f4f79e94000+0x5591) [0x7f4f79e99591]
(EE) 4: /usr/bin/X (0x400000+0x73da8) [0x473da8]
(EE) 5: /usr/bin/X (0x400000+0x9c330) [0x49c330]
(EE) 6: /usr/lib/libpthread.so.0 (0x7f4f7f8af000+0xf870) [0x7f4f7f8be870]
(EE) 7: /usr/lib/libc.so.6 (ioctl+0x7) [0x7f4f7e9eef17]
(EE) 8: /usr/lib/libdrm.so.2 (drmCommandWrite+0x5d) [0x7f4f8055e9fd]
(EE) 9: /usr/lib/libdrm_nouveau.so.2 (nouveau_bo_wait+0x8a) [0x7f4f8058446a]
(EE) 10: /usr/lib/xorg/modules/drivers/nouveau_drv.so (0x7f4f7d349000+0x716b) [0x7f4f7d35016b]
(EE) 11: /usr/lib/xorg/modules/libexa.so (0x7f4f7cd05000+0xb308) [0x7f4f7cd10308]
(EE) 12: /usr/bin/X (0x400000+0x170563) [0x570563]
(EE) 13: /usr/bin/X (0x400000+0xc0f95) [0x4c0f95]
(EE) 14: /usr/bin/X (0x400000+0x104193) [0x504193]
(EE) 15: /usr/bin/X (0x400000+0x373be) [0x4373be]
(EE) 16: /usr/bin/X (0x400000+0x2693a) [0x42693a]
(EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f4f7e932bc5]
(EE) 18: /usr/bin/X (0x400000+0x26c81) [0x426c81]
(EE)
[ 216.437] [mi] Increasing EQ size to 512 to prevent dropped events.
[ 216.438] [mi] EQ processing has resumed after 188 dropped events.
[ 216.438] [mi] This may be caused my a misbehaving driver monopolizing the server's resources.
[ 216.438] Failed to switch from vt01 to vt06: Input/output error
[ 216.438] Failed to switch from vt01 to vt06: Input/output error
[ 216.438] Failed to switch from vt01 to vt06: Input/output error
[ 216.438] Failed to switch from vt01 to vt02: Input/output error
[ 216.438] Failed to switch from vt01 to vt03: Input/output error
[ 216.438] Failed to switch from vt01 to vt04: Input/output error
[ 216.438] Failed to switch from vt01 to vt05: Input/output error
[ 216.438] Failed to switch from vt01 to vt06: Input/output error
[ 216.438] Failed to switch from vt01 to vt07: Input/output error
[ 216.438] Failed to switch from vt01 to vt08: Input/output error
[ 216.438] Failed to switch from vt01 to vt09: Input/output error
[ 216.438] Failed to switch from vt01 to vt10: Input/output error
[ 216.438] Failed to switch from vt01 to vt11: Input/output error
[ 216.438] Failed to switch from vt01 to vt02: Input/output error
[ 216.810] (II) evdev: HP WMI hotkeys: Close
[ 216.811] (II) UnloadModule: "evdev"
[ 216.811] (II) UnloadModule: "synaptics"
[ 216.811] (II) evdev: PS/2 Generic Mouse: Close
[ 216.811] (II) UnloadModule: "evdev"
[ 216.811] (II) evdev: AT Translated Set 2 keyboard: Close
[ 216.811] (II) UnloadModule: "evdev"
[ 216.811] (II) evdev: Sleep Button: Close
[ 216.811] (II) UnloadModule: "evdev"
[ 216.811] (II) evdev: Video Bus: Close
[ 216.811] (II) UnloadModule: "evdev"
[ 216.811] (II) evdev: Power Button: Close
[ 216.811] (II) UnloadModule: "evdev"
In addition, I can't seem to find any other files related nvidia that seem like they would matter, except for ~/.nvidia-settings-rc, which I moved to ~/.nvidia-settings-rc.bk (prior to the attempt which created the log above). Keep in mind that this is after re-installing nvidia so I can startx and have a working system... Is there anything that looks like it wouldn't be removed by the nvidia package?
# find / -name *nvidia*
/proc/irq/63/nvidia
/proc/driver/nvidia
/home/jwhendy/.nvidia-settings-rc.bk
[hits from /usr/share/icons excluded]
[hits from /usr/share/ excluded]
/usr/lib/libnvidia-tls.so
/usr/lib/modules/extramodules-3.11-ARCH/nvidia.ko.gz
/usr/lib/modules/3.11.6-1-ARCH/kernel/drivers/net/ethernet/nvidia
/usr/lib/nvidia
/usr/lib/libnvidia-tls.so.325.15
/usr/lib/libnvidia-ml.so
/usr/lib/libnvidia-glcore.so
/usr/lib/vdpau/libvdpau_nvidia.so
/usr/lib/vdpau/libvdpau_nvidia.so.1
/usr/lib/vdpau/libvdpau_nvidia.so.325.15
/usr/lib/libnvidia-glcore.so.325.15
/usr/lib/libnvidia-ml.so.325.15
/usr/lib/libnvidia-cfg.so
/usr/lib/xorg/modules/drivers/nvidia_drv.so
/usr/lib/libnvidia-cfg.so.325.15
/usr/lib/modprobe.d/nvidia.conf # owned by nvidia; removed when I switch to nouveau
/usr/lib/libnvidia-cfg.so.1
/usr/lib/libnvidia-ml.so.1
/usr/bin/nvidia-settings
/usr/bin/nvidia-xconfig
/usr/bin/nvidia-smi
/usr/bin/nvidia-bug-report.sh
/usr/bin/nvidia-debugdump
/root/.nvidia-settings-rc
[hits from /var/abs/ removed]
/dev/nvidia0
/dev/nvidiactl
/sys/bus/pci/drivers/nvidia
/sys/kernel/slab/nvidia_p2p_page_t
/sys/module/drm/holders/nvidia
/sys/module/i2c_core/holders/nvidia
/sys/module/nvidia
/sys/module/nvidia/drivers/pci:nvidia
Anything look odd in the log or the files?
As always, feel free to suggest other things to try -- I can pipe ls into files to show what files are available when I'm pre-startx with nouveau installed, or more Xorg logs... My computer is not happy wtih nvidia at all and is nearly unusable. I really need to solve this until nvidia is compatible with 3.11 kernels again.

Choosing iMac model. Nvidia 8800 hotter than ATI 2600 ?

I'm just about to buy a 2.8GHz 24" iMac and am trying to decide whether to upgrade to the NVidia 8800 Graphics card or not.
I'm mainly trying to make it as future-proof as I can by putting in a higher spec card now, and also I guess Snow Leopard (with OpenCL) should be able to make much better use of the NVIDIA card than the ATI one.
I'm happy with the cost involved, but I'm concerned that the 8800 (being a more powerful card) may run hotter in normal (i.e. non-gaming) use compared to the 2600.
Could anyone offer an opinion on this? Do you think I'm likely to experience more fan noise with an 8800 fitted compared to a 2600?
Thanks
Steve

It does run hotter, fans are still inaudible unless right next to it (ear pressed where it will feel the heat).... now here's the thing: The fan speed won't increase noticeably even under extreme load.
To answer your question, if I focus on it, I can hear the fans (right now). If I reach up and touch the top (around top left) it's warm to the touch, and I can barely feel a warm breeze coming out
If i were to fire up Second Life (game) for about 10-20 minutes - it gets uncomfortably warm to the touch along the top edge (quick), and I could feel but barely hear more air being pushed out.
Me and a friend launched Second Life from openGL profiler - she (ATI 2600, 2.8/4m) was hitting around 40-50 FPS, I was hitting 120-180 (these were on a private estate (somewhat controlled environmentals), both set to level 3 quality - kinda apples to apples as best as we could).
I can't really comment on the openCL enhancements to come, It's a severely crippled 8800 (GS) - so I'd not put a lot of weight behind the OpenCL acceleration. It's not a Quadro.
I was under no illusions that it was a gaming machine or a production 3D/graphics workstation tho - it's good enough for casual gaming/semi-pro use with some decent capabilities, don't expect too much from it tho.
There is one of the mac fan sites that tracks the average days of refresh - roughly when to expect the next big "refresh" from Apple - maybe someone else can remember where it is... (something like mid jan/late spring roughly - with some exceptions).
Last thing I'd want is to have ordered the 8800 as a CTO (not refundable) to find out 5 days later a 9800 with 1 gig on a slick nvidia chipset was replacing it. And that they had replaced the mighty mouse.
The iMac 8800/3.06 is the quietest machine I've worked with, power wise - even when it is cranked to the hilt, and it gets hot, uncomfortably hot (that makes me jittery - which is why I'm glad I've got AppleCare). I could run SMC fan control or something to keep it cooler, but I'd prefer to see if Apple's got it right.
Anyhow... Good luck with it all. I plan on selling mine - maybe not tho, it would make a cool fishtank. (I'm learning I'm just not an Apple person, tho I'm still trying).

Won't boot anymore after nvidia-xconfig

Hey Guys,
Got a problem with my Arch Linux here, hope you can help.
Today I tried to install the official Nvidia Driver and BumbleBee following along the great Wiki on this topic.
Everything worked just fine and I also could run optirun gfxgear or somemthing like this.
I wanted to switch to the Nvidia Settings in the settings menu and it told me to configure my xconfig and restart x so I typed nvidia-xconfig in the terminal and it gave me an success output.
I restarted my system and now it hangs on the graphical thing I think. It won't boot anymore.
Hope you can help me out.
Thanks alot
Edit: My Nvidia Card is a Nvidia GT 740M if this matters
Last edited by Whitz (2015-02-09 11:02:41)

No, I have a laptop with 2 graphic cards an intel hd4000 and a nvidia gt 740m.
I ran the Arch Linux installation well until I tried to get the nvidia gt working with bumblebee.
I followed the wiki of the bumblebee topic and it worked well. I wanted to switch into the nvidia settings and it told me my x isnt configured properly and I should type nvidia-xconfig and restart X.
After the restart it won't boot to the graphical interface anymore.
Hope this cleared up the things
Also I dont get any errors but it just wont load..
Last edited by Whitz (2015-02-09 12:08:49)

Blue Screen of Dead when installing Nvidia

Hello everyone, I Have a HP ENVY 15t-j000 and newly formatted because was too slow. When I started to install all the drivers from HP website, everything was running fine and the only driver left to install was the Nvidia GT 740m. I downloaded and installed the Nvidia driver from HP web site, the installation run without problems, I was asked to restarted the computer, but when the computer started, I've logged in and after 1 or 2 minuts I receive a BSOD power state failure (error 0x9F from minidump). I've done a restore to the previous installation, and tryied to install the driver from Nvidia web site, no sucess again (BSOD dpc watch dog violation) Does anyone know how to proceed ? ps: I don't have the recovery partition anymore.

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 15t-j000 Notebook and issues with Nvidia. I would not install this driver package. I would run the HP Support Assistant. It will install any software and drivers that are needed for your system.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase or that need updating. Thanks.

NVidia White MacBook: iTunes video stutters in first 2-3 minutes of play

I recently bought a white nVidia MacBook to replace my aged core duo machine with the GMA950. For years I've been using the old macbook to watch iTunes videos on my big screen TV without a hiccup. The new nVidia machine however, has a stutter with a period of about 10 seconds during the first 2-3 minutes a video from iTunes plays. After the initial period of stuttering, it settles down and may only occur once or twice during the remainder of the show.
I buy the "standard def" because the quality is good enough (I'm old enough to remember antennas high on the roof in a rural location that despite their immense size and rotational capabilities, could still only get sound + red and black snow).
I did upgrade the HD almost immediately on receipt from the stock 120gb model to a Seagate 500gb model, 5400 rpm, SATA II, 8 mb cache. I would think the replacement drive would fare favorably with stock.
Anyway, I'm wondering if others have seen this issue on white nVidia MacBooks.
Message was edited by: thepotter

Hello there dfstearns,
I was thinking it might be a good idea to delete the affected albums and re download them, free of charge, from the iTunes store. This article will help with re downloading the purchases:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519.
All the very best,
Sterling

HP ENVY 17t Quad 740M GT Upgrade

I Have A HP ENVY 17t Quad-j000 With Windows 8.1
Can I Upgrade My Discrete GPU NVIDIA GeForce 740M To A Better GPU Like A NVIDIA GeForce GTX Graphics Processor.
This question was solved.
View Solution.

Hi,
This is your same other question. No, physically impossble
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Nvidia 5200, how is the performance?

Currently, I have a Radeon 9500 Pro video card, and no matter which driver I use (catalyst or open source), it freezes my computer dead. In Ubuntu this really only happened when I did something with OpenGL (even glxgears) but since I've switched to Arch it has happened even while loading KDE. Right now, I don't even have a xorg.conf file because that's the only way I can get my computer to load a GUI (I'm guessing that it is defaulting to using vesa drivers?)
The point is that my friend is bringing me an Nvidia 5200 video card and I'm going to use that, but I'm wondering how the performance is. I'm pretty sure it's gonna render things faster than my vesa'd 9500 Pro, but I know that my video card is actually much faster if I could ever have gotten it to work properly. Does the 5200 support compositing, for example, without being slow? Is having a slow video card going to hurt me in someway (I do OpenGL programming, but only small things). Also, my current card is hooked up to my LCD via DVI, but the 5200 only has VGA outputs; how much of a degrade in quality will I see on my LCD?
Thanks for the help.

Alot of people on the forums seem to be having trouble with ATI cards recently so I'm glad I bought an nvidia card to replace an old ATI Rage card awhile ago. Apparently nvidia and linux are a tad more friendly with each other. I certainly had no problems setting up my card. The 5200 is a little older than my 6200 and I'm not sure what effect the vga out is going to have but I'm sure you'll be happy with the nvidia card.
After a recent nvidia driver upgrade I had to switch back to the nvidia-96xx driver for games to work properly so I'd say that you most likely will not be able to run the latest nvidia driver.

[SOLVED] Nvidia proprietary drivers

Hello,
I just got a new Asus laptop with nvidia optimus (intel hd 4000 + Nvidia GF 740M) and can't install the nvidia drivers successfully.
Currently is running on intel-dri with nouveau-dri installed too
I removed mesa-libgl since it is in conflict with nvidia-libgl
pacman -Rdd mesa-libgl
installed nvidia nvidia-libgl xf86-video-modesetting
pacman -S nvidia nvidia-libgl xf86-video-modesetting
and rebooted.
After reboot I just get a black screen and after 30 seconds or so I get an error that something went wrong with a button to logout (using gnome).
What I'm doing wrong, or what else I have to do and I'm not doing?
I read about bumblebee. Is that a must for nvidia optimus?
I managed to crash arch for good so I I'll do a fresh reinstall, but I wish to know what exactly to do to make proprietary drivers work right away
Also tried the nvidia-full-beta from AUR and same effect
Thank you
Last edited by Gatz (2013-10-20 06:48:19)

made a fresh reinstall without messing other things around and now I get a black screen. I checked the logs and here it is the error
[ 5.430] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 5.430] (EE) NVIDIA: system's kernel log for additional error messages.
[ 5.430] (II) modesetting(0): using drv /dev/dri/card0
[ 5.430] (EE) Screen 0 deleted because of no matching config section.
[ 5.430] (II) UnloadModule: "modesetting"
[ 5.430] (EE) Device(s) detected, but none match those in the config file.
[ 5.430] (EE)
Fatal server error:
[ 5.430] (EE) no screens found(EE)
@karol: Yes, I'm following https://wiki.archlinux.org/index.php/NV … IA_drivers
@vostok4: I blacklisted nouveau and also did a '-Rdd nouveau-dri' just in case
Edit: When I run 'lspci | grep VGA' I shouldn't have NVIDIA there too?
'lspci | grep VGA'
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
'lspci | grep NVIDIA'
01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 740M] (rev a1)
' xrandr --listproviders'
Providers: number : 1
Provider 0: id: 0x46 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 3 outputs: 4 associated providers: 0 name:Intel
Last edited by Gatz (2013-10-18 21:38:48)

Nvidia gt 740m replacement

Similar Messages

Maybe you are looking for