Nvidia GTX 560 Ti HAWK

Where can i get VBIOS updates for my graphic card?
Version: 70.24.11.00.00

And now its different:
https://www.dropbox.com/s/g9v96gi9t3f6xyg/MSIKombustorDX11%202012-05-17%2023-28-54-45.bmp
https://www.dropbox.com/s/c9vnimm4b6rz1q2/MSIKombustorDX11%202012-05-17%2023-28-56-39.bmp
https://www.dropbox.com/s/cwls8ccpsm41kau/MSIKombustorDX11%202012-05-17%2023-29-04-02.bmp

Similar Messages

  • MSI GTX 560 TI Hawk Unstable?

    I have a brand new custom built PC with two MSI 560 TI Hawk cards in SLI and I have a problem with playing games on this system. I've tried Portal 2, Far Cry 2, Two Worlds 2 and The Witcher 2. All games seem unstable with comparable problems:
    Random lock-ups for 10-20 seconds with audio looping
    Random small jitters, frame drops and stutters, including audio stutters
    Sometimes my whole system freezes so I have to push the reset button
    Artifacts
    Flickering parts of the horizon, sky or ground in the game
    Sometimes the game runs fine for a few minutes and then the problems start happening, sometimes they are there from the beginning.
    I tried to eliminate possible causes one by one to narrow out the actual problem. Even disabling SLI and running on a single card doesn't help.
    Here are the things I tried:
    Monitor GPU temperatures with GPU-Z: didn't show anything unusual, around 35 degrees idle to 65-70 degrees stressed
    Disable SLI: didn't fix the problem
    Download MSI drivers v266.44 (older version than current NVidia drivers): didn't fix it and I couldn't find the SLI option in these drivers so i switched back to v280.26
    Check driver and firmware version with MSI Live Update 5: everything seemed to be up to date
    Remove graphics cards: cleaning the connections and re-installing, didn't fix it
    Stress the cards with FurMark: no issues detected and temperatures seemed normal (70 degrees stressed)
    Lower the stock clock speed (950 Mhz) to the standard non-overclocked speed (822 Mhz): this seemed to help at first and the problems didn't occur for a while. But while i'm testing right now Portal 2 froze and stuttered a few times again. Although it seems like it happens less often. So this might be a clue to my problem. Anyway I didn't pay extra money for these overclocked cards to underclock them back to standard so I would like to make the cards run on stock settings (950 Mhz).
    Here are my system specifications:
    Processor: Intel Core i7 2600K 3.4 Ghz (stock speed)
    Mainboard: Asus P8Z68 V-Pro
    Memory: 2x Corsair Vengeance 4GB DDR3 CL9 12800 Mhz
    SSD: Crucial M4 256GB SSD
    HDD: 2x WD Caviar Blue - Raid 0
    Graphics: NVidia Geforce GTX 560 TI Hawk 1GB SLI
    PSU: Corsair TX750 V2 (750 watt)
    I hope you can help me to fix this issue because I'm out of ideas right now....
    Thanks in advance
    Tandpastatester

    Well I've tried some more things but it's all still very weird and not helping at all   I will explain my findings in the order i tested the cards this time, after every card-switch i did a clean re-install of the VGA drivers:
    Card-2
    I've ran the OCCT test for one hour on card-2, i got zero errors and temperature never went above 76 degrees with a fan speed around 68%. After this i tried testing some games again and I found out there were still problems regardless of me saying that card-2 did fine before. In Portal 2 I was leaving the game on for a while and after a few minutes it froze with audio looping. I found out that when I use ctrl+alt+del to go to the task manager and then go back to the game it recovered and I could continue playing (weird??!). The same thing happened with The Witcher 2, freezing with audio loop and going to task manager and back let me continue playing. This happened every few minutes.
    Card-1
    Now it was time to try card-1 again. This time this card didn't seem to have the frequency problems I mentioned before but the problems didn't go away. Portal 2 let the game freeze within a minute, and I could use the same strategy (task manager) to continue, but this time after a few seconds it would freeze again and again. The same happened with The Witcher 2. Then I tried Far Cry 2 and this game had the same flickering problems as with card-2 but a lot worse... it was almost everywhere. Even sometimes the flickering had a checkerboard kind of shape. Now I ran the OCCT test with this card and there were no problems. Another strange thing was that when I was looking at the graph after the test, the temperature was much lower (65 degrees) and the graph line of the framerate was very straight (stable) along the test. This was different than with card 2 where the framerate and temp were higher and not so stable.
    After all it appears i have comparable problems with both cards, only with card-1 they are much worse.

  • PSU for MSI GeForce GTX 560 Ti HAWK in SLI ?

     Do you know what psu should i get for 2 MSI GeForce GTX 560 Ti HAWK?

    Depends what other components your system consists of. >>Posting Guide<<
    But here is the link to the recommended PSU for such a combo. https://forum-en.msi.com/faq/article/power-requirements-for-graphics-cards
    A 42A PSU is suggested. Thus a Corsair TX650 will suffice but to leave you with additional overhead you could opt for a Corsair TX750. The Corsair PSUs have single 12V rails which are recommended and have an above average reliability and build quality.

  • Nvidia GTX 560 Ti Twin Frozr driver hanging.. even after fresh OS install

    Dear,
    Sorry for my english 
    I'm facing issue with my Nvidia GTX 560 Ti Twin Frozr II, and I saw other do have... 
    My config :
    When using windows, or games (I'm Crysis addicted ) I get a screen freeze, a blank (black) screen and after seconds a video driver message saying that it recovers the display as it were not responding anymore....
    It happens without reason to me and temperature isn't related as it happen even with a temp of 45°c....
    I've tried :
    Updating driver, downgrading them,
    Re installing Windows (x64),
    Updating motherboard Bios (P55a-UD3R Gigabyte with latest bios version)
    Flashing my OCZ Vertex 3 SSD (a pain ....)
    Upgrading my power supply to a Corsair 750GS
    Nothing corrects the problem.
    At last I 'm looking to upgrade video bios but I don't want to brick my precious video card...
    So I'm requesting your help to use "THE" good file version of video bios using  NVFlash 5.118 for Windows for example.
    Overclocking isn't my goal, stability is...
    Thanks a lot for your help... as I ain't find video bios file on MSI support site....

    You are lightning fast !! 
    880 -> 822
    1050 -> 2000
    I sure have done an error here !!     
    Modification will be done as soon as I get close to my Crysis PC... (ETA 18h00 GMT+1  )
    880 -> 822 won't be noticable
    1050 -> 2000 will result in a massive perf improvement ??
    I red :
    4000M hz !!!!
    I believe it's all wrong...

  • Fixing temps issues GTX 560 TI HAWK

    1) make a good air flow for the VGA, putting air from the ground, ejecting up the hot air, put a fan in the middle of the card( case )
    2) download AFTERBURNER 2.1.0, NOT THE BETA
    and set this values
    1025 CORE TEMP
    880 clock speed
    2100 ram speed
    check with AIDA 64 the GPU AMBIENT ( RAM TEMP OF THE CARD ) and check the voltages.
    please, if somebody have this problem with the GTX 560 TI HAWK, try do this, in my computer i found a bug with the voltages in the beta afterburner
    5 weeks ago i buy this card, and my problem with this card is the temp, so changin this values, i found a stable configuration to my card, now iam having a max temp of 68º with 20 city ambient temp, and 71º ( average 69) with 30º of city ambient.
    please, only use afterburner 2.1.0, if u use the beta, check the voltage value in the AIDA64 if is the same of default clock, the beta is working bad
    good luck
    PD: for more info, see my threads and posts, all my history with this card is there, and gonna help more of one.

    oh, and another tip to fix the IDLE temps
    if u have a two monitors the VGA gonna work with high clock, and without power saving mode, if u use one monitor, u gonna see a temps of 28/32º
    if u wanna a fast fix to the air flow case to check the temps, u can use a big fan

  • RMA question gtx 560 ti HAWK

    if the card, can work with the default clocks ( high temps ) i should rma the card? for example at 1025 core voltage i have to use the clock at 880 and not the default 950, if i put in 1062 with 880 core clock or 950 core clock, i have high temps in memory temp ( 100+) and gpu temp (80+ in 3 minutes )
    and fan coolers at 80+ in SILENT mode

    Quote from: Svet on 23-December-11, 02:19:13
    switch to Peformance BIOS, also open PC case side door and retest
    i tested that without side door even out of case and no major difference in temperatures!and also performance bios didnt help here is my furmark test with open side cover (80 in 6 mins ~5000 RPM):
    i tested mafia 2 and almost same old results
    as i said before reseller warranty company tested (out of case) and reached 80!with 100% fan~4400 RPM!obvious high temp and noisy for HAWK right?i really dont think its about air flow or ambient temp!
    so could you please admit that this high temp and noisy Fan(+ that weird memory temp) is a problem and i can replace my VGA with new one with normal temperatures like this :
    http://www.guru3d.com/article/msi-geforce-gtx-560-ti-hawk-review/8
     then according to you i send back the VGA for replacement and if you say 80-90 is normal for a gtx 560 Ti HAWK and wont be any problem so my bad !
    thank you Svet

  • Nvidia GTX 560 Ti support

    Hello. I'll be buying a new PC. One important aspect of the new configuration for me is the support for linux. The hardware that I think most linux folks have problem with is the graphics card. I want you to give me your opinion on Nvidia GTX 560 Ti. How well does it perform on linux and are there any significant problems that I may encounter should I decide to buy it?

    I have one, it has had a couple of issues with the open-source (nouveau) drivers in the past year which prevented booting for several kernel releases. If you use the propriety blob, you'll probably be okay.
    Plays TF2 on Linux flawlessly.

  • I have an Nvidia GTX 560, yet 310.19 wont work

    Irritated and baffled by this. This page clearly states that my GTX 560 is supported by 310.19 (as it should...this card isn't that old), yet after installing the new driver and rebooting, Xorg fails to start, and error logs say that the Nvidia kernel module couldn't be initialized.
    Xorg log
    [ 10.593]
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    [ 10.616] X Protocol Version 11, Revision 0
    [ 10.616] Build Operating System: Linux 3.6.3-1-ARCH x86_64
    [ 10.616] Current Operating System: Linux ZeroArch 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64
    [ 10.616] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=996407e6-20a3-422f-92f8-3d9fe913b87c ro quiet add_efi_memmap
    [ 10.616] Build Date: 08 November 2012 07:09:29PM
    [ 10.616]
    [ 10.617] Current version of pixman: 0.28.0
    [ 10.617] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 10.617] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 10.617] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 20 22:14:39 2012
    [ 10.717] (==) Using config file: "/etc/X11/xorg.conf"
    [ 10.717] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 10.742] (==) ServerLayout "Layout0"
    [ 10.742] (**) |-->Screen "Screen0" (0)
    [ 10.742] (**) | |-->Monitor "Monitor0"
    [ 10.742] (**) | |-->Device "Device0"
    [ 10.742] (**) |-->Input Device "Keyboard0"
    [ 10.742] (**) |-->Input Device "Mouse0"
    [ 10.743] (**) Option "Xinerama" "0"
    [ 10.743] (==) Automatically adding devices
    [ 10.743] (==) Automatically enabling devices
    [ 10.743] (==) Automatically adding GPU devices
    [ 10.827] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 10.827] Entry deleted from font path.
    [ 10.827] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 10.828] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 10.828] Entry deleted from font path.
    [ 10.828] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 10.828] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/
    [ 10.828] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 10.828] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 10.828] (WW) Disabling Keyboard0
    [ 10.828] (WW) Disabling Mouse0
    [ 10.828] (II) Loader magic: 0x7fcc40
    [ 10.828] (II) Module ABI versions:
    [ 10.828] X.Org ANSI C Emulation: 0.4
    [ 10.828] X.Org Video Driver: 13.1
    [ 10.828] X.Org XInput driver : 18.0
    [ 10.828] X.Org Server Extension : 7.0
    [ 10.831] (--) PCI:*(0:1:0:0) 10de:1201:3842:1461 rev 161, Mem @ 0xfc000000/33554432, 0xd0000000/134217728, 0xd8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 10.831] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 10.849] Initializing built-in extension Generic Event Extension
    [ 10.849] Initializing built-in extension SHAPE
    [ 10.849] Initializing built-in extension MIT-SHM
    [ 10.849] Initializing built-in extension XInputExtension
    [ 10.849] Initializing built-in extension XTEST
    [ 10.849] Initializing built-in extension BIG-REQUESTS
    [ 10.849] Initializing built-in extension SYNC
    [ 10.849] Initializing built-in extension XKEYBOARD
    [ 10.849] Initializing built-in extension XC-MISC
    [ 10.849] Initializing built-in extension SECURITY
    [ 10.849] Initializing built-in extension XINERAMA
    [ 10.849] Initializing built-in extension XFIXES
    [ 10.849] Initializing built-in extension RENDER
    [ 10.849] Initializing built-in extension RANDR
    [ 10.849] Initializing built-in extension COMPOSITE
    [ 10.849] Initializing built-in extension DAMAGE
    [ 10.849] Initializing built-in extension MIT-SCREEN-SAVER
    [ 10.849] Initializing built-in extension DOUBLE-BUFFER
    [ 10.849] Initializing built-in extension RECORD
    [ 10.849] Initializing built-in extension DPMS
    [ 10.849] Initializing built-in extension X-Resource
    [ 10.849] Initializing built-in extension XVideo
    [ 10.849] Initializing built-in extension XVideo-MotionCompensation
    [ 10.849] Initializing built-in extension XFree86-VidModeExtension
    [ 10.849] Initializing built-in extension XFree86-DGA
    [ 10.849] Initializing built-in extension XFree86-DRI
    [ 10.849] Initializing built-in extension DRI2
    [ 10.849] (II) LoadModule: "glx"
    [ 10.899] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 13.088] (II) Module glx: vendor="NVIDIA Corporation"
    [ 13.088] compiled for 4.0.2, module version = 1.0.0
    [ 13.088] Module class: X.Org Server Extension
    [ 13.088] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012
    [ 13.088] Loading extension GLX
    [ 13.088] (II) LoadModule: "nvidia"
    [ 13.110] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 13.425] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 13.425] compiled for 4.0.2, module version = 1.0.0
    [ 13.425] Module class: X.Org Video Driver
    [ 13.511] (II) NVIDIA dlloader X Driver 310.19 Thu Nov 8 00:53:33 PST 2012
    [ 13.511] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 13.541] (++) using VT number 7
    [ 13.563] (II) Loading sub module "wfb"
    [ 13.563] (II) LoadModule: "wfb"
    [ 13.564] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 13.626] (II) Module wfb: vendor="X.Org Foundation"
    [ 13.626] compiled for 1.13.0, module version = 1.0.0
    [ 13.626] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 13.626] (II) Loading sub module "ramdac"
    [ 13.626] (II) LoadModule: "ramdac"
    [ 13.626] (II) Module "ramdac" already built-in
    [ 13.651] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 13.651] (==) NVIDIA(0): RGB weight 888
    [ 13.651] (==) NVIDIA(0): Default visual is TrueColor
    [ 13.651] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 13.651] (**) NVIDIA(0): Option "Stereo" "0"
    [ 13.651] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-0"
    [ 13.651] (**) NVIDIA(0): Option "ModeDebug" "1"
    [ 13.651] (**) NVIDIA(0): Stereo disabled by request
    [ 13.671] (**) NVIDIA(0): Option "MetaModes" "1920x1080 +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0"
    [ 13.671] (**) NVIDIA(0): Enabling 2D acceleration
    [ 13.729] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
    [ 13.729] (EE) NVIDIA(0): system's kernel log for additional error messages and
    [ 13.730] (EE) NVIDIA(0): consult the NVIDIA README for details.
    [ 13.730] (EE) NVIDIA(0): *** Aborting ***
    [ 13.730] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 13.730] (II) UnloadModule: "nvidia"
    [ 13.730] (II) UnloadSubModule: "wfb"
    [ 13.730] (EE) Screen(s) found, but none have a usable configuration.
    [ 13.730]
    Fatal server error:
    [ 13.730] no screens found
    [ 13.730] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 13.730] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 13.730] (EE)
    [ 13.781] Server terminated with error (1). Closing log file.
    There were no additional error messages that I could find. Files like /var/log/errors.log /var/log/kernel.log were empty.
    I don't see why there's any reason Nvidia should be throwing a fit...the drivers are stated to be compatible with my card. Anyone have any ideas?
    xorg.conf
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 304.60 ([email protected]) Sun Oct 14 21:34:33 PDT 2012
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "0"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Ancor Communications Inc ASUS VH242H"
    HorizSync 30.0 - 85.0
    VertRefresh 55.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 560"
    Option "ModeDebug" "1"
    EndSection
    Section "Screen"
    # Removed Option "metamodes" "nvidia-auto-select +0+0"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "nvidiaXineramaInfoOrder" "CRT-0"
    Option "Stereo" "0"
    Option "metamodes" "1920x1080 +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.6.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=996407e6-20a3-422f-92f8-3d9fe913b87c ro quiet add_efi_memmap
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ceff9fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ceffa000-0x00000000cf082fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cf083000-0x00000000cf089fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cf08a000-0x00000000cf2b7fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cf2b8000-0x00000000cf2b8fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cf2b9000-0x00000000cf2c8fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cf2c9000-0x00000000cf2cffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cf2d0000-0x00000000cf2f6fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cf2f7000-0x00000000cf4f9fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cf4fa000-0x00000000cf783fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cf784000-0x00000000cfef5fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cfef6000-0x00000000cfefffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000022effffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.10 by American Megatrends
    [ 0.000000] efi: SMBIOS=0xf0480 ACPI=0xcf083000 ACPI 2.0=0xcf083000 MPS=0xfcab0
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
    [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000007f000) (0MB)
    [ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000007f000-0x0000000000080000) (0MB)
    [ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000080000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fd0000) (14MB)
    [ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000fd0000-0x0000000001000000) (0MB)
    [ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
    [ 0.000000] efi: mem07: type=4, attr=0xf, range=[0x0000000001100000-0x0000000001343000) (2MB)
    [ 0.000000] efi: mem08: type=3, attr=0xf, range=[0x0000000001343000-0x0000000001347000) (0MB)
    [ 0.000000] efi: mem09: type=4, attr=0xf, range=[0x0000000001347000-0x0000000001377000) (0MB)
    [ 0.000000] efi: mem10: type=3, attr=0xf, range=[0x0000000001377000-0x000000000137e000) (0MB)
    [ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x000000000137e000-0x0000000001381000) (0MB)
    [ 0.000000] efi: mem12: type=3, attr=0xf, range=[0x0000000001381000-0x0000000001385000) (0MB)
    [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000001385000-0x0000000001386000) (0MB)
    [ 0.000000] efi: mem14: type=3, attr=0xf, range=[0x0000000001386000-0x0000000001388000) (0MB)
    [ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x0000000001388000-0x000000000138a000) (0MB)
    [ 0.000000] efi: mem16: type=3, attr=0xf, range=[0x000000000138a000-0x000000000138b000) (0MB)
    [ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x000000000138b000-0x000000000138c000) (0MB)
    [ 0.000000] efi: mem18: type=3, attr=0xf, range=[0x000000000138c000-0x000000000138d000) (0MB)
    [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x000000000138d000-0x000000000138e000) (0MB)
    [ 0.000000] efi: mem20: type=3, attr=0xf, range=[0x000000000138e000-0x000000000138f000) (0MB)
    [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x000000000138f000-0x0000000001395000) (0MB)
    [ 0.000000] efi: mem22: type=3, attr=0xf, range=[0x0000000001395000-0x0000000001397000) (0MB)
    [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x0000000001397000-0x00000000013ab000) (0MB)
    [ 0.000000] efi: mem24: type=3, attr=0xf, range=[0x00000000013ab000-0x00000000013b3000) (0MB)
    [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000013b3000-0x00000000013c3000) (0MB)
    [ 0.000000] efi: mem26: type=3, attr=0xf, range=[0x00000000013c3000-0x00000000013cb000) (0MB)
    [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000013cb000-0x00000000013d1000) (0MB)
    [ 0.000000] efi: mem28: type=3, attr=0xf, range=[0x00000000013d1000-0x00000000013f5000) (0MB)
    [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000013f5000-0x00000000013f7000) (0MB)
    [ 0.000000] efi: mem30: type=3, attr=0xf, range=[0x00000000013f7000-0x00000000013f8000) (0MB)
    [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000013f8000-0x00000000022eb000) (14MB)
    [ 0.000000] efi: mem32: type=3, attr=0xf, range=[0x00000000022eb000-0x00000000022ef000) (0MB)
    [ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x00000000022ef000-0x00000000022fc000) (0MB)
    [ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000022fc000-0x000000000230d000) (0MB)
    [ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x000000000230d000-0x0000000002313000) (0MB)
    [ 0.000000] efi: mem36: type=3, attr=0xf, range=[0x0000000002313000-0x0000000002319000) (0MB)
    [ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000002319000-0x0000000002321000) (0MB)
    [ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x0000000002321000-0x0000000002333000) (0MB)
    [ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000002333000-0x0000000002338000) (0MB)
    [ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x0000000002338000-0x0000000002339000) (0MB)
    [ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000002339000-0x0000000002344000) (0MB)
    [ 0.000000] efi: mem42: type=3, attr=0xf, range=[0x0000000002344000-0x0000000002345000) (0MB)
    [ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x0000000002345000-0x0000000002347000) (0MB)
    [ 0.000000] efi: mem44: type=3, attr=0xf, range=[0x0000000002347000-0x0000000002362000) (0MB)
    [ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x0000000002362000-0x0000000002368000) (0MB)
    [ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x0000000002368000-0x0000000002370000) (0MB)
    [ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x0000000002370000-0x0000000002375000) (0MB)
    [ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x0000000002375000-0x0000000002388000) (0MB)
    [ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x0000000002388000-0x000000000238f000) (0MB)
    [ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x000000000238f000-0x0000000002396000) (0MB)
    [ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x0000000002396000-0x00000000023af000) (0MB)
    [ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000023af000-0x00000000023b2000) (0MB)
    [ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x00000000023b2000-0x0000000002403000) (0MB)
    [ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x0000000002403000-0x0000000002404000) (0MB)
    [ 0.000000] efi: mem55: type=4, attr=0xf, range=[0x0000000002404000-0x0000000002406000) (0MB)
    [ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x0000000002406000-0x000000000240c000) (0MB)
    [ 0.000000] efi: mem57: type=4, attr=0xf, range=[0x000000000240c000-0x0000000002415000) (0MB)
    [ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x0000000002415000-0x000000000241b000) (0MB)
    [ 0.000000] efi: mem59: type=4, attr=0xf, range=[0x000000000241b000-0x0000000002420000) (0MB)
    [ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x0000000002420000-0x0000000002426000) (0MB)
    [ 0.000000] efi: mem61: type=4, attr=0xf, range=[0x0000000002426000-0x0000000002428000) (0MB)
    [ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x0000000002428000-0x000000000242b000) (0MB)
    [ 0.000000] efi: mem63: type=4, attr=0xf, range=[0x000000000242b000-0x000000000242f000) (0MB)
    [ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x000000000242f000-0x0000000002430000) (0MB)
    [ 0.000000] efi: mem65: type=4, attr=0xf, range=[0x0000000002430000-0x000000000279a000) (3MB)
    [ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x000000000279a000-0x000000000279f000) (0MB)
    [ 0.000000] efi: mem67: type=4, attr=0xf, range=[0x000000000279f000-0x00000000027a4000) (0MB)
    [ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x00000000027a4000-0x00000000027a5000) (0MB)
    [ 0.000000] efi: mem69: type=4, attr=0xf, range=[0x00000000027a5000-0x00000000027a7000) (0MB)
    [ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x00000000027a7000-0x00000000027ab000) (0MB)
    [ 0.000000] efi: mem71: type=4, attr=0xf, range=[0x00000000027ab000-0x00000000027ac000) (0MB)
    [ 0.000000] efi: mem72: type=3, attr=0xf, range=[0x00000000027ac000-0x00000000027b0000) (0MB)
    [ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x00000000027b0000-0x00000000027b7000) (0MB)
    [ 0.000000] efi: mem74: type=3, attr=0xf, range=[0x00000000027b7000-0x00000000027b9000) (0MB)
    [ 0.000000] efi: mem75: type=4, attr=0xf, range=[0x00000000027b9000-0x00000000027c2000) (0MB)
    [ 0.000000] efi: mem76: type=3, attr=0xf, range=[0x00000000027c2000-0x00000000027c6000) (0MB)
    [ 0.000000] efi: mem77: type=4, attr=0xf, range=[0x00000000027c6000-0x00000000027ce000) (0MB)
    [ 0.000000] efi: mem78: type=3, attr=0xf, range=[0x00000000027ce000-0x00000000027d0000) (0MB)
    [ 0.000000] efi: mem79: type=4, attr=0xf, range=[0x00000000027d0000-0x00000000027db000) (0MB)
    [ 0.000000] efi: mem80: type=3, attr=0xf, range=[0x00000000027db000-0x0000000002b3d000) (3MB)
    [ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x0000000002b3d000-0x0000000002b41000) (0MB)
    [ 0.000000] efi: mem82: type=3, attr=0xf, range=[0x0000000002b41000-0x0000000002b47000) (0MB)
    [ 0.000000] efi: mem83: type=4, attr=0xf, range=[0x0000000002b47000-0x0000000002b49000) (0MB)
    [ 0.000000] efi: mem84: type=3, attr=0xf, range=[0x0000000002b49000-0x0000000002b4b000) (0MB)
    [ 0.000000] efi: mem85: type=4, attr=0xf, range=[0x0000000002b4b000-0x0000000002b5a000) (0MB)
    [ 0.000000] efi: mem86: type=3, attr=0xf, range=[0x0000000002b5a000-0x0000000002b5c000) (0MB)
    [ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x0000000002b5c000-0x0000000002b61000) (0MB)
    [ 0.000000] efi: mem88: type=3, attr=0xf, range=[0x0000000002b61000-0x0000000002b72000) (0MB)
    [ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x0000000002b72000-0x0000000002b7a000) (0MB)
    [ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x0000000002b7a000-0x0000000002b7c000) (0MB)
    [ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x0000000002b7c000-0x0000000002b81000) (0MB)
    [ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x0000000002b81000-0x0000000002b86000) (0MB)
    [ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x0000000002b86000-0x0000000002b8e000) (0MB)
    [ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x0000000002b8e000-0x0000000002b92000) (0MB)
    [ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x0000000002b92000-0x0000000002bc8000) (0MB)
    [ 0.000000] efi: mem96: type=3, attr=0xf, range=[0x0000000002bc8000-0x0000000002bdd000) (0MB)
    [ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x0000000002bdd000-0x0000000002da2000) (1MB)
    [ 0.000000] efi: mem98: type=3, attr=0xf, range=[0x0000000002da2000-0x0000000002da4000) (0MB)
    [ 0.000000] efi: mem99: type=4, attr=0xf, range=[0x0000000002da4000-0x0000000002da6000) (0MB)
    [ 0.000000] efi: mem100: type=3, attr=0xf, range=[0x0000000002da6000-0x0000000002da7000) (0MB)
    [ 0.000000] efi: mem101: type=4, attr=0xf, range=[0x0000000002da7000-0x0000000002daf000) (0MB)
    [ 0.000000] efi: mem102: type=3, attr=0xf, range=[0x0000000002daf000-0x0000000002db3000) (0MB)
    [ 0.000000] efi: mem103: type=4, attr=0xf, range=[0x0000000002db3000-0x000000000321d000) (4MB)
    [ 0.000000] efi: mem104: type=3, attr=0xf, range=[0x000000000321d000-0x000000000322f000) (0MB)
    [ 0.000000] efi: mem105: type=4, attr=0xf, range=[0x000000000322f000-0x0000000003318000) (0MB)
    [ 0.000000] efi: mem106: type=3, attr=0xf, range=[0x0000000003318000-0x0000000003387000) (0MB)
    [ 0.000000] efi: mem107: type=4, attr=0xf, range=[0x0000000003387000-0x000000000338c000) (0MB)
    [ 0.000000] efi: mem108: type=3, attr=0xf, range=[0x000000000338c000-0x000000000338e000) (0MB)
    [ 0.000000] efi: mem109: type=4, attr=0xf, range=[0x000000000338e000-0x0000000003393000) (0MB)
    [ 0.000000] efi: mem110: type=3, attr=0xf, range=[0x0000000003393000-0x0000000003397000) (0MB)
    [ 0.000000] efi: mem111: type=4, attr=0xf, range=[0x0000000003397000-0x000000000339c000) (0MB)
    [ 0.000000] efi: mem112: type=3, attr=0xf, range=[0x000000000339c000-0x000000000339e000) (0MB)
    [ 0.000000] efi: mem113: type=4, attr=0xf, range=[0x000000000339e000-0x00000000033a1000) (0MB)
    [ 0.000000] efi: mem114: type=3, attr=0xf, range=[0x00000000033a1000-0x00000000033a3000) (0MB)
    [ 0.000000] efi: mem115: type=4, attr=0xf, range=[0x00000000033a3000-0x00000000033a6000) (0MB)
    [ 0.000000] efi: mem116: type=7, attr=0xf, range=[0x00000000033a6000-0x00000000033c2000) (0MB)
    [ 0.000000] efi: mem117: type=4, attr=0xf, range=[0x00000000033c2000-0x0000000003643000) (2MB)
    [ 0.000000] efi: mem118: type=7, attr=0xf, range=[0x0000000003643000-0x0000000003662000) (0MB)
    [ 0.000000] efi: mem119: type=4, attr=0xf, range=[0x0000000003662000-0x00000000037dc000) (1MB)
    [ 0.000000] efi: mem120: type=1, attr=0xf, range=[0x00000000037dc000-0x00000000037fa000) (0MB)
    [ 0.000000] efi: mem121: type=7, attr=0xf, range=[0x00000000037fa000-0x00000000037fb000) (0MB)
    [ 0.000000] efi: mem122: type=4, attr=0xf, range=[0x00000000037fb000-0x00000000038ab000) (0MB)
    [ 0.000000] efi: mem123: type=7, attr=0xf, range=[0x00000000038ab000-0x00000000038cc000) (0MB)
    [ 0.000000] efi: mem124: type=4, attr=0xf, range=[0x00000000038cc000-0x00000000038ed000) (0MB)
    [ 0.000000] efi: mem125: type=7, attr=0xf, range=[0x00000000038ed000-0x0000000004000000) (7MB)
    [ 0.000000] efi: mem126: type=2, attr=0xf, range=[0x0000000004000000-0x0000000004ed0000) (14MB)
    [ 0.000000] efi: mem127: type=7, attr=0xf, range=[0x0000000004ed0000-0x0000000036f52000) (800MB)
    [ 0.000000] efi: mem128: type=2, attr=0xf, range=[0x0000000036f52000-0x00000000377a1000) (8MB)
    [ 0.000000] efi: mem129: type=7, attr=0xf, range=[0x00000000377a1000-0x000000009be61000) (1606MB)
    [ 0.000000] efi: mem130: type=2, attr=0xf, range=[0x000000009be61000-0x00000000ceffa000) (817MB)
    [ 0.000000] efi: mem131: type=10, attr=0xf, range=[0x00000000ceffa000-0x00000000cf083000) (0MB)
    [ 0.000000] efi: mem132: type=9, attr=0xf, range=[0x00000000cf083000-0x00000000cf08a000) (0MB)
    [ 0.000000] efi: mem133: type=6, attr=0x800000000000000f, range=[0x00000000cf08a000-0x00000000cf165000) (0MB)
    [ 0.000000] efi: mem134: type=0, attr=0xf, range=[0x00000000cf165000-0x00000000cf278000) (1MB)
    [ 0.000000] efi: mem135: type=6, attr=0x800000000000000f, range=[0x00000000cf278000-0x00000000cf27c000) (0MB)
    [ 0.000000] efi: mem136: type=0, attr=0xf, range=[0x00000000cf27c000-0x00000000cf2b1000) (0MB)
    [ 0.000000] efi: mem137: type=5, attr=0x800000000000000f, range=[0x00000000cf2b1000-0x00000000cf2b7000) (0MB)
    [ 0.000000] efi: mem138: type=6, attr=0x800000000000000f, range=[0x00000000cf2b7000-0x00000000cf2b8000) (0MB)
    [ 0.000000] efi: mem139: type=10, attr=0xf, range=[0x00000000cf2b8000-0x00000000cf2b9000) (0MB)
    [ 0.000000] efi: mem140: type=0, attr=0xf, range=[0x00000000cf2b9000-0x00000000cf2c9000) (0MB)
    [ 0.000000] efi: mem141: type=10, attr=0xf, range=[0x00000000cf2c9000-0x00000000cf2d0000) (0MB)
    [ 0.000000] efi: mem142: type=5, attr=0x800000000000000f, range=[0x00000000cf2d0000-0x00000000cf2d2000) (0MB)
    [ 0.000000] efi: mem143: type=6, attr=0x800000000000000f, range=[0x00000000cf2d2000-0x00000000cf2e4000) (0MB)
    [ 0.000000] efi: mem144: type=5, attr=0x800000000000000f, range=[0x00000000cf2e4000-0x00000000cf2f4000) (0MB)
    [ 0.000000] efi: mem145: type=6, attr=0x800000000000000f, range=[0x00000000cf2f4000-0x00000000cf2f7000) (0MB)
    [ 0.000000] efi: mem146: type=10, attr=0xf, range=[0x00000000cf2f7000-0x00000000cf4fa000) (2MB)
    [ 0.000000] efi: mem147: type=3, attr=0xf, range=[0x00000000cf4fa000-0x00000000cf776000) (2MB)
    [ 0.000000] efi: mem148: type=4, attr=0xf, range=[0x00000000cf776000-0x00000000cf779000) (0MB)
    [ 0.000000] efi: mem149: type=3, attr=0xf, range=[0x00000000cf779000-0x00000000cf784000) (0MB)
    [ 0.000000] efi: mem150: type=6, attr=0x800000000000000f, range=[0x00000000cf784000-0x00000000cfef6000) (7MB)
    [ 0.000000] efi: mem151: type=3, attr=0xf, range=[0x00000000cfef6000-0x00000000cff00000) (0MB)
    [ 0.000000] efi: mem152: type=7, attr=0xf, range=[0x0000000100001000-0x000000022f000000) (4847MB)
    [ 0.000000] efi: mem153: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem154: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
    [ 0.000000] efi: mem155: type=11, attr=0x8000000000000001, range=[0x00000000fec20000-0x00000000fec21000) (0MB)
    [ 0.000000] efi: mem156: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
    [ 0.000000] efi: mem157: type=11, attr=0x8000000000000001, range=[0x00000000fed61000-0x00000000fed71000) (0MB)
    [ 0.000000] efi: mem158: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed90000) (0MB)
    [ 0.000000] efi: mem159: type=11, attr=0x8000000000000001, range=[0x00000000fef00000-0x0000000100000000) (17MB)
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: MSI MS-7693/970A-G46 (MS-7693), BIOS V1.5 02/16/2012
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF write-through
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-EBFFF uncachable
    [ 0.000000] EC000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
    [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
    [ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 000000022f000000 aka 8944M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xcff00 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fcdc0-0x000fcdcf] mapped at [ffff8800000fcdc0]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfefffff]
    [ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
    [ 0.000000] [mem 0xcfe00000-0xcfefffff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0xcfefffff @ [mem 0x1fffd000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100001000-0x22effffff]
    [ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
    [ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
    [ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
    [ 0.000000] [mem 0x200000000-0x22effffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x22effffff @ [mem 0xceff6000-0xceff9fff]
    [ 0.000000] RAMDISK: [mem 0x36f52000-0x377a0fff]
    [ 0.000000] ACPI: RSDP 00000000cf083000 00024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 00000000cf083068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000cf088f50 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120711/tbfadt-598)
    [ 0.000000] ACPI: DSDT 00000000cf083140 05E0A (v02 ALASKA A M I 00000000 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000cf2caf80 00040
    [ 0.000000] ACPI: APIC 00000000cf089048 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 00000000cf0890e8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
    [ 0.000000] ACPI: HPET 00000000cf089128 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
    [ 0.000000] ACPI: SSDT 00000000cf089160 00B9C (v01 AMD POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022effffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22effffff]
    [ 0.000000] NODE_DATA [mem 0x22effc000-0x22effffff]
    [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226600000-ffff88022e5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x22effffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009ffff]
    [ 0.000000] node 0: [mem 0x00100000-0xceff9fff]
    [ 0.000000] node 0: [mem 0xcf4fa000-0xcf783fff]
    [ 0.000000] node 0: [mem 0xcfef6000-0xcfefffff]
    [ 0.000000] node 0: [mem 0x100001000-0x22effffff]
    [ 0.000000] On node 0 totalpages: 2089501
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 11 pages reserved
    [ 0.000000] DMA zone: 3909 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 828110 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19392 pages used for memmap
    [ 0.000000] Normal zone: 1221695 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[24])
    [ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 72
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000ceffa000 - 00000000cf083000
    [ 0.000000] PM: Registered nosave memory: 00000000cf083000 - 00000000cf08a000
    [ 0.000000] PM: Registered nosave memory: 00000000cf08a000 - 00000000cf2b8000
    [ 0.000000] PM: Registered nosave memory: 00000000cf2b8000 - 00000000cf2b9000
    [ 0.000000] PM: Registered nosave memory: 00000000cf2b9000 - 00000000cf2c9000
    [ 0.000000] PM: Registered nosave memory: 00000000cf2c9000 - 00000000cf2d0000
    [ 0.000000] PM: Registered nosave memory: 00000000cf2d0000 - 00000000cf2f7000
    [ 0.000000] PM: Registered nosave memory: 00000000cf2f7000 - 00000000cf4fa000
    [ 0.000000] PM: Registered nosave memory: 00000000cf784000 - 00000000cfef6000
    [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
    [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
    [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
    [ 0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
    [ 0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
    [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
    [ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
    [ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
    [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
    [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
    [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
    [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
    [ 0.000000] e820: [mem 0xcff00000-0xfebfffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022ec00000 s84608 r8192 d21888 u262144
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2053714
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=996407e6-20a3-422f-92f8-3d9fe913b87c ro quiet add_efi_memmap
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Node 0: aperture @ c4000000 size 32 MB
    [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
    [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    [ 0.000000] Please enable the IOMMU option in the BIOS setup
    [ 0.000000] This costs you 64 MB of RAM
    [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
    [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
    [ 0.000000] Memory: 8031632k/9158656k available (4727k kernel code, 800652k absent, 326372k reserved, 4143k data, 768k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:4352 nr_irqs:1288 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 3600.223 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7203.46 BogoMIPS (lpj=12000743)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.002170] Security Framework initialized
    [ 0.002173] AppArmor: AppArmor disabled by boot time parameter
    [ 0.002659] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.004635] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.005496] Mount-cache hash table entries: 256
    [ 0.005659] Initializing cgroup subsys cpuacct
    [ 0.005660] Initializing cgroup subsys memory
    [ 0.005668] Initializing cgroup subsys devices
    [ 0.005669] Initializing cgroup subsys freezer
    [ 0.005670] Initializing cgroup subsys net_cls
    [ 0.005671] Initializing cgroup subsys blkio
    [ 0.005689] tseg: 00cff00000
    [ 0.005691] CPU: Physical Processor ID: 0
    [ 0.005691] CPU: Processor Core ID: 0
    [ 0.005693] mce: CPU supports 7 MCE banks
    [ 0.005698] LVT offset 1 assigned for vector 0xf9
    [ 0.005703] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
    tlb_flushall_shift is 0xffffffff
    [ 0.006360] ACPI: Core revision 20120711
    [ 0.027571] ftrace: allocating 18347 entries in 72 pages
    [ 0.034694] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.067650] smpboot: CPU0: AMD FX(tm)-4100 Quad-Core Processor stepping 02
    [ 0.173402] Performance Events:
    [ 0.173403] perf: AMD core performance counters detected
    [ 0.173405] AMD PMU driver.
    [ 0.173406] ... version: 0
    [ 0.173407] ... bit width: 48
    [ 0.173408] ... generic registers: 6
    [ 0.173409] ... value mask: 0000ffffffffffff
    [ 0.173410] ... max period: 00007fffffffffff
    [ 0.173410] ... fixed-purpose events: 0
    [ 0.173411] ... event mask: 000000000000003f
    [ 0.200070] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.213354] smpboot: Booting Node 0, Processors #1 #2 #3
    [ 0.276446] Brought up 4 CPUs
    [ 0.276449] smpboot: Total of 4 processors activated (28813.85 BogoMIPS)
    [ 0.283152] devtmpfs: initialized
    [ 0.284932] PM: Registering ACPI NVS region [mem 0xceffa000-0xcf082fff] (561152 bytes)
    [ 0.284943] PM: Registering ACPI NVS region [mem 0xcf2b8000-0xcf2b8fff] (4096 bytes)
    [ 0.284944] PM: Registering ACPI NVS region [mem 0xcf2c9000-0xcf2cffff] (28672 bytes)
    [ 0.284945] PM: Registering ACPI NVS region [mem 0xcf2f7000-0xcf4f9fff] (2109440 bytes)
    [ 0.285814] NET: Registered protocol family 16
    [ 0.285972] ACPI: bus type pci registered
    [ 0.286025] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.286027] PCI: not using MMCONFIG
    [ 0.286029] PCI: Using configuration type 1 for base access
    [ 0.286029] PCI: Using configuration type 1 for extended access
    [ 0.286582] bio: create slab <bio-0> at 0
    [ 0.286639] ACPI: Added _OSI(Module Device)
    [ 0.286640] ACPI: Added _OSI(Processor Device)
    [ 0.286641] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.286642] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.287530] ACPI: EC: Look up EC in DSDT
    [ 0.288539] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.291751] ACPI: Interpreter enabled
    [ 0.291756] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.291773] ACPI: Using IOAPIC for interrupt routing
    [ 0.291909] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.291948] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.314838] ACPI: No dock devices found.
    [ 0.314841] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.315011] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.315266] PCI host bridge to bus 0000:00
    [ 0.315269] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
    [ 0.315271] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.315272] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
    [ 0.315274] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
    [ 0.315276] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
    [ 0.315277] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.315279] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.315280] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.315282] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
    [ 0.315292] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
    [ 0.315353] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
    [ 0.315386] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.315400] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
    [ 0.315432] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [ 0.315459] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
    [ 0.315474] pci 0000:00:11.0: reg 10: [io 0xf090-0xf097]
    [ 0.315481] pci 0000:00:11.0: reg 14: [io 0xf080-0xf083]
    [ 0.315488] pci 0000:00:11.0: reg 18: [io 0xf070-0xf077]
    [ 0.315496] pci 0000:00:11.0: reg 1c: [io 0xf060-0xf063]
    [ 0.315503] pci 0000:00:11.0: reg 20: [io 0xf050-0xf05f]
    [ 0.315510] pci 0000:00:11.0: reg 24: [mem 0xfe20b000-0xfe20b3ff]
    [ 0.315526] pci 0000:00:11.0: set SATA to AHCI mode
    [ 0.315563] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    [ 0.315573] pci 0000:00:12.0: reg 10: [mem 0xfe20a000-0xfe20afff]
    [ 0.315628] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    [ 0.315642] pci 0000:00:12.2: reg 10: [mem 0xfe209000-0xfe2090ff]
    [ 0.315704] pci 0000:00:12.2: supports D1 D2
    [ 0.315706] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.315724] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    [ 0.315734] pci 0000:00:13.0: reg 10: [mem 0xfe208000-0xfe208fff]
    [ 0.315788] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
    [ 0.315803] pci 0000:00:13.2: reg 10: [mem 0xfe207000-0xfe2070ff]
    [ 0.315865] pci 0000:00:13.2: supports D1 D2
    [ 0.315866] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.315884] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    [ 0.315941] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
    [ 0.315951] pci 0000:00:14.1: reg 10: [io 0xf040-0xf047]
    [ 0.315958] pci 0000:00:14.1: reg 14: [io 0xf030-0xf033]
    [ 0.315966] pci 0000:00:14.1: reg 18: [io 0xf020-0xf027]
    [ 0.315973] pci 0000:00:14.1: reg 1c: [io 0xf010-0xf013]
    [ 0.315980] pci 0000:00:14.1: reg 20: [io 0xf000-0xf00f]
    [ 0.316009] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    [ 0.316026] pci 0000:00:14.2: reg 10: [mem 0xfe200000-0xfe203fff 64bit]
    [ 0.316076] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.316087] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
    [ 0.316145] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    [ 0.316177] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
    [ 0.316188] pci 0000:00:14.5: reg 10: [mem 0xfe206000-0xfe206fff]
    [ 0.316242] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
    [ 0.316298] pci 0000:00:15.0: supports D1 D2
    [ 0.316320] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
    [ 0.316330] pci 0000:00:16.0: reg 10: [mem 0xfe205000-0xfe205fff]
    [ 0.316384] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
    [ 0.316399] pci 0000:00:16.2: reg 10: [mem 0xfe204000-0xfe2040ff]
    [ 0.316461] pci 0000:00:16.2: supports D1 D2
    [ 0.316463] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    [ 0.316481] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
    [ 0.316499] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
    [ 0.316516] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
    [ 0.316531] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
    [ 0.316549] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
    [ 0.316563] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
    [ 0.316603] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
    [ 0.316614] pci 0000:01:00.0: [10de:1201] type 00 class 0x030000
    [ 0.316623] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfdffffff]
    [ 0.316632] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
    [ 0.316641] pci 0000:01:00.0: reg 1c: [mem 0xd8000000-0xdbffffff 64bit pref]
    [ 0.316647] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
    [ 0.316654] pci 0000:01:00.0: reg 30: [mem 0xfe000000-0xfe07ffff pref]
    [ 0.316704] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
    [ 0.316713] pci 0000:01:00.1: reg 10: [mem 0xfe080000-0xfe083fff]
    [ 0.323182] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.323186] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.323188] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe0fffff]
    [ 0.323191] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
    [ 0.323213] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
    [ 0.323233] pci 0000:02:00.0: [1b21:1042] type 00 class 0x0c0330
    [ 0.323250] pci 0000:02:00.0: reg 10: [mem 0xfe100000-0xfe107fff 64bit]
    [ 0.323333] pci 0000:02:00.0: PME# supported from D3hot
    [ 0.329835] pci 0000:00:04.0: PCI bridge to [bus 02]
    [ 0.329839] pci 0000:00:04.0: bridge window [mem 0xfe100000-0xfe1fffff]
    [ 0.329853] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
    [ 0.329895] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
    [ 0.329901] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 0.329903] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 0.329905] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 0.329906] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.329908] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.329909] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.329911] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
    [ 0.329946] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff]
    [ 0.329965] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.329981] pci 0000:04:00.0: reg 10: [io 0xd000-0xd0ff]
    [ 0.330006] pci 0000:04:00.0: reg 18: [mem 0xdc104000-0xdc104fff 64bit pref]
    [ 0.330023] pci 0000:04:00.0: reg 20: [mem 0xdc100000-0xdc103fff 64bit pref]
    [ 0.330094] pci 0000:04:00.0: supports D1 D2
    [ 0.330095] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.336494] pci 0000:00:15.0: PCI bridge to [bus 04]
    [ 0.336499] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
    [ 0.336505] pci 0000:00:15.0: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
    [ 0.336519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.336629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
    [ 0.336688] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
    [ 0.336720] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
    [ 0.336748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
    [ 0.336787] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.336789] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.342737] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
    [ 0.342794] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
    [ 0.342852] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
    [ 0.342911] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
    [ 0.342960] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
    [ 0.342994] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
    [ 0.343028] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
    [ 0.343061] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
    [ 0.343142] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.343144] vgaarb: loaded
    [ 0.343145] vgaarb: bridge control possible 0000:01:00.0
    [ 0.343179] PCI: Using ACPI for IRQ routing
    [ 0.349476] PCI: pci_cache_line_size set to 64 bytes
    [ 0.349547] e820: reserve RAM buffer [mem 0xceffa000-0xcfffffff]
    [ 0.349550] e820: reserve RAM buffer [mem 0xcf784000-0xcfffffff]
    [ 0.349551] e820: reserve RAM buffer [mem 0xcff00000-0xcfffffff]
    [ 0.349552] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
    [ 0.349635] NetLabel: Initializing
    [ 0.349636] NetLabel: domain hash size = 128
    [ 0.349637] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.349648] NetLabel: unlabeled traffic allowed by default
    [ 0.349661] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.349664] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.351698] Switching to clocksource hpet
    [ 0.357083] pnp: PnP ACPI init
    [ 0.357093] ACPI: bus type pnp registered
    [ 0.357237] pnp 00:00: [bus 00-ff]
    [ 0.357241] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.357242] pnp 00:00: [io 0x0000-0x03af window]
    [ 0.357244] pnp 00:00: [io 0x03e0-0x0cf7 window]
    [ 0.357245] pnp 00:00: [io 0x03b0-0x03df window]
    [ 0.357247] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.357249] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.357250] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 0.357252] pnp 00:00: [mem 0xd0000000-0xffffffff window]
    [ 0.357253] pnp 00:00: [mem 0x00000000 window]
    [ 0.357288] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.357318] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 0.357355] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.357358] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.357571] pnp 00:02: [io 0x040b]
    [ 0.357572] pnp 00:02: [io 0x04d6]
    [ 0.357574] pnp 00:02: [io 0x0c00-0x0c01]
    [ 0.357575] pnp 00:02: [io 0x0c14]
    [ 0.357576] pnp 00:02: [io 0x0c50-0x0c51]
    [ 0.357578] pnp 00:02: [io 0x0c52]
    [ 0.357579] pnp 00:02: [io 0x0c6c]
    [ 0.357580] pnp 00:02: [io 0x0c6f]
    [ 0.357581] pnp 00:02: [io 0x0cd0-0x0cd1]
    [ 0.357583] pnp 00:02: [io 0x0cd2-0x0cd3]
    [ 0.357584] pnp 00:02: [io 0x0cd4-0x0cd5]
    [ 0.357585] pnp 00:02: [io 0x0cd6-0x0cd7]
    [ 0.357586] pnp 00:02: [io 0x0cd8-0x0cdf]
    [ 0.357588] pnp 00:02: [io 0x0800-0x089f]
    [ 0.357589] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.357591] pnp 00:02: [io 0x0000-0x000f]
    [ 0.357592] pnp 00:02: [io 0x0b20-0x0b3f]
    [ 0.357593] pnp 00:02: [io 0x0900-0x090f]
    [ 0.357594] pnp 00:02: [io 0x0910-0x091f]
    [ 0.357596] pnp 00:02: [io 0xfe00-0xfefe]
    [ 0.357597] pnp 00:02: [io 0x0060-0x005f disabled]
    [ 0.357599] pnp 00:02: [io 0x0064-0x0063 disabled]
    [ 0.357600] pnp 00:02: [io 0x0485-0x0486]
    [ 0.357601] pnp 00:02: [mem 0xfec00000-0xfec00fff]
    [ 0.357603] pnp 00:02: [mem 0xfee00000-0xfee00fff]
    [ 0.357604] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
    [ 0.357605] pnp 00:02: [mem 0xfed61000-0xfed70fff]
    [ 0.357607] pnp 00:02: [mem 0xfec10000-0xfec10fff]
    [ 0.357608] pnp 00:02: [mem 0xfed00000-0xfed00fff]
    [ 0.357609] pnp 00:02: [mem 0xff800000-0xffffffff]
    [ 0.357664] system 00:02: [io 0x040b] has been reserved
    [ 0.357666] system 00:02: [io 0x04d6] has been reserved
    [ 0.357668] system 00:02: [io 0x0c00-0x0c01] has been reserved
    [ 0.357669] system 00:02: [io 0x0c14] has been reserved
    [ 0.357671] system 00:02: [io 0x0c50-0x0c51] has been reserved
    [ 0.357673] system 00:02: [io 0x0c52] has been reserved
    [ 0.357674] system 00:02: [io 0x0c6c] has been reserved
    [ 0.357676] system 00:02: [io 0x0c6f] has been reserved
    [ 0.357677] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.357679] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.357681] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.357682] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.357684] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.357687] system 00:02: [io 0x0800-0x089f] has been reserved
    [ 0.357689] system 00:02: [io 0x0b20-0x0b3f] has been reserved
    [ 0.357690] system 00:02: [io 0x0900-0x090f] has been reserved
    [ 0.357692] system 00:02: [io 0x0910-0x091f] has been reserved
    [ 0.357694] system 00:02: [io 0xfe00-0xfefe] has been reserved
    [ 0.357696] system 00:02: [io 0x0485-0x0486] has been reserved
    [ 0.357698] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.357700] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.357702] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
    [ 0.357703] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
    [ 0.357705] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
    [ 0.357707] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
    [ 0.357709] system 00:02: [mem 0xff800000-0xffffffff] has been reserved
    [ 0.357711] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.357836] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.357839] pnp 00:03: [io 0x0a00-0x0a0f]
    [ 0.357841] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.357842] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.357879] system 00:03: [io 0x0a00-0x0a0f] has been reserved
    [ 0.357882] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.358038] pnp 00:04: [io 0x03f8-0x03ff]
    [ 0.358044] pnp 00:04: [irq 4]
    [ 0.358046] pnp 00:04: [dma 0 disabled]
    [ 0.358089] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.358099] pnp 00:05: [dma 4]
    [ 0.358101] pnp 00:05: [io 0x0000-0x000f]
    [ 0.358102] pnp 00:05: [io 0x0081-0x0083]
    [ 0.358104] pnp 00:05: [io 0x0087]
    [ 0.358105] pnp 00:05: [io 0x0089-0x008b]
    [ 0.358106] pnp 00:05: [io 0x008f]
    [ 0.358107] pnp 00:05: [io 0x00c0-0x00df]
    [ 0.358127] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.358135] pnp 00:06: [io 0x0070-0x0071]
    [ 0.358139] pnp 00:06: [irq 8]
    [ 0.358160] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.358166] pnp 00:07: [io 0x0061]
    [ 0.358187] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.358207] pnp 00:08: [io 0x0010-0x001f]
    [ 0.358209] pnp 00:08: [io 0x0022-0x003f]
    [ 0.358210] pnp 00:08: [io 0x0044-0x005f]
    [ 0.358211] pnp 00:08: [io 0x0062-0x0063]
    [ 0.358212] pnp 00:08: [io 0x0065-0x006f]
    [ 0.358214] pnp 00:08: [io 0x0072-0x007f]
    [ 0.358215] pnp 00:08: [io 0x0080]
    [ 0.358216] pnp 00:08: [io 0x0084-0x0086]
    [ 0.358217] pnp 00:08: [io 0x0088]
    [ 0.358219] pnp 00:08: [io 0x008c-0x008e]
    [ 0.358220] pnp 00:08: [io 0x0090-0x009f]
    [ 0.358221] pnp 00:08: [io 0x00a2-0x00bf]
    [ 0.358224] pnp 00:08: [io 0x00e0-0x00ef]
    [ 0.358225] pnp 00:08: [io 0x04d0-0x04d1]
    [ 0.358267] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.358270] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.358277] pnp 00:09: [io 0x00f0-0x00ff]
    [ 0.358280] pnp 00:09: [irq 13]
    [ 0.358301] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.358347] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.358474] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.358516] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.358605] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.358607] pnp 00:0c: [mem 0xfec20000-0xfec200ff]
    [ 0.358652] system 00:0c: [mem 0xfec20000-0xfec200ff] could not be reserved
    [ 0.358654] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.358765] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
    [ 0.358797] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.358800] pnp: PnP ACPI: found 14 devices
    [ 0.358801] ACPI: ACPI bus type pnp unregistered
    [ 0.365282] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.365285] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.365288] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe0fffff]
    [ 0.365290] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
    [ 0.365293] pci 0000:00:04.0: PCI bridge to [bus 02]
    [ 0.365296] pci 0000:00:04.0: bridge window [mem 0xfe100000-0xfe1fffff]
    [ 0.365299] pci 0000:00:14.4: PCI bridge to [bus 03]
    [ 0.365308] pci 0000:00:15.0: PCI bridge to [bus 04]
    [ 0.365310] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
    [ 0.365315] pci 0000:00:15.0: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
    [ 0.365339] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 0.365341] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 0.365343] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 0.365344] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 0.365346] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.365347] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.365348] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
    [ 0.365350] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.365351] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe0fffff]
    [ 0.365353] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
    [ 0.365354] pci_bus 0000:02: resource 1 [mem 0xfe100000-0xfe1fffff]
    [ 0.365356] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
    [ 0.365357] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
    [ 0.365359] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
    [ 0.365360] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
    [ 0.365362] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.365363] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.365365] pci_bus 0000:03: resource 10 [mem 0xd0000000-0xffffffff]
    [ 0.365366] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
    [ 0.365368] pci_bus 0000:04: resource 2 [mem 0xdc100000-0xdc1fffff 64bit pref]
    [ 0.365389] NET: Registered protocol family 2
    [ 0.366003] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.367665] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.367870] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.367896] TCP: reno registered
    [ 0.367908] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.367945] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.368031] NET: Registered protocol family 1
    [ 0.674641] pci 0000:01:00.0: Boot video device
    [ 0.674687] PCI: CLS 64 bytes, default 64
    [ 0.674727] Unpacking initramfs...
    [ 0.796668] Freeing initrd memory: 8508k freed
    [ 0.798617] PCI-DMA: Disabling AGP.
    [ 0.798682] PCI-DMA: aperture base @ c4000000 size 65536 KB
    [ 0.798683] PCI-DMA: using GART IOMMU.
    [ 0.798685] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [ 0.802600] LVT offset 0 assigned for vector 0x400
    [ 0.802627] perf: AMD IBS detected (0x000000ff)
    [ 0.802819] audit: initializing netlink socket (disabled)
    [ 0.802834] type=2000 audit(1353475492.683:1): initialized
    [ 0.811826] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.813829] VFS: Disk quotas dquot_6.5.2
    [ 0.813869] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.813986] msgmni has been set to 15916
    [ 0.814168] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.814209] io scheduler noop registered
    [ 0.814210] io scheduler deadline registered
    [ 0.814253] io scheduler cfq registered (default)
    [ 0.814512] efifb: probing for efifb
    [ 0.814782] efifb: framebuffer at 0xd9000000, mapped to 0xffffc90012780000, using 3072k, total 3072k
    [ 0.814783] efifb: mode is 1024x768x32, linelength=4096, pages=1
    [ 0.814784] efifb: scrolling: redraw
    [ 0.814786] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.826475] Console: switching to colour frame buffer device 128x48
    [ 0.838117] fb0: EFI VGA frame buffer device
    [ 0.838139] GHES: HEST is not enabled!
    [ 0.838191] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.858663] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.879351] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.879522] Linux agpgart interface v0.103
    [ 0.879569] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.879885] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.879900] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.880017] mousedev: PS/2 mouse device common for all mice
    [ 0.880045] rtc_cmos 00:06: RTC can wake from S4
    [ 0.880140] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 0.880158] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.880165] cpuidle: using governor ladder
    [ 0.880166] cpuidle: using governor menu
    [ 0.880267] drop_monitor: Initializing network drop monitor service
    [ 0.880322] TCP: cubic registered
    [ 0.880410] NET: Registered protocol family 10
    [ 0.880525] NET: Registered protocol family 17
    [ 0.880532] Key type dns_resolver registered
    [ 0.880798] PM: Hibernation image not present or could not be loaded.
    [ 0.880804] registered taskstats version 1
    [ 0.881453] rtc_cmos 00:06: setting system clock to 2012-11-21 05:24:53 UTC (1353475493)
    [ 0.883256] Freeing unused kernel memory: 768k freed
    [ 0.883387] Write protecting the kernel read-only data: 8192k
    [ 0.888716] Freeing unused kernel memory: 1408k freed
    [ 0.891110] Freeing unused kernel memory: 568k freed
    [ 0.897826] systemd-udevd[53]: starting version 195
    [ 0.899858] SCSI subsystem initialized
    [ 0.900780] ACPI: bus type scsi registered
    [ 0.900827] libata version 3.00 loaded.
    [ 0.902143] scsi0 : pata_atiixp
    [ 0.902492] scsi1 : pata_atiixp
    [ 0.902632] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [ 0.902633] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [ 1.076344] ahci 0000:00:11.0: version 3.0
    [ 1.076438] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
    [ 1.076440] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    [ 1.077771] scsi2 : ahci
    [ 1.078171] scsi3 : ahci
    [ 1.078413] scsi4 : ahci
    [ 1.078607] scsi5 : ahci
    [ 1.078895] ata3: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b100 irq 19
    [ 1.078899] ata4: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b180 irq 19
    [ 1.078902] ata5: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b200 irq 19
    [ 1.078905] ata6: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b280 irq 19
    [ 1.396833] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.396862] ata6: SATA link down (SStatus 0 SControl 300)
    [ 1.563219] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.563244] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.565550] ata4.00: ATAPI: ASUS DRW-24B1ST c, 1.05, max UDMA/100
    [ 1.566401] ata4.00: configured f

    Updated first post with dmesg output. I added all of it, but here's a quick snippet of the tail (which is right after booting up and attempting to autostart SLiM)
    [ 13.426857] NVRM: API mismatch: the client has the version 310.19, but
    NVRM: this kernel module has the version 304.60. Please
    NVRM: make sure that this kernel module and all NVIDIA driver
    NVRM: components have the same version.
    Why is the kernel getting 304.60 ? That's got to be the issue, but I don't why the kernel is getting 304.60 ...
    Output of pacman -Qs nvidia:
    local/conky-nvidia 1.9.0-2
    An advanced, highly configurable system monitor for X based on torsmo
    local/lib32-nvidia-utils 310.19-1
    NVIDIA drivers utilities and libraries. (32-bit)
    local/libvdpau-git-flashpatch 20120825-1
    Nvidia VDPAU library from git with patch to fix flash blue tint and bleed through
    local/libxnvctrl 304.51-1
    NVIDIA X Ctrl library
    local/nvidia 310.19-2
    NVIDIA drivers for linux.
    local/nvidia-utils 310.19-1
    NVIDIA drivers utilities and libraries.

  • Driver issue msi gtx 560 ti hawk

    Which driver to use with msi 560 ti hawk currently using 275.33 but after installing battlefield 3 the game freezes in just 5 minutes of the gameplay the game requires latest drivers 285.xx from nvidia should i update to the latest driver from nvidia website.please help guys...

    You can upgrade your driver. Test afterwards and see if it made a difference. Is there no patch for BF3 ? Perhaps look on the website
    You may also want to read these NVidia Forum posts. http://forums.nvidia.com/index.php?showtopic=193106

  • BF3 crashes every 5 mins - GTX 560 TI HAWK FROZR III

    So Battlefield 3 looks great on this card but it crashes all the time.  Nice and random.  Drivers are up to date and the MSI auto bios system doesn't find any new ones.  However, I hear the auto system doesn't work.  Trying to get help to see why this is happening and if it does need a bios update.  Card is about 3 months old.
    System:
    Core 2 3.2ghz
    4 GB DDR3 RAM
    Cosair 650W
    MSI GTX 560 TI FROZR III
                    Display device       : MSI N560GTX-Ti Hawk (P) on GF114 GPU
                    Display driver       : 296.10
                    BIOS               : 70.24.11.00.00
                    S/N:                 602-v260-02sb1104176610
                    VBIOS:            http://www.filefactory.com/file/6i0i0zyz6zwr/n/GF114_bin
    MSI Afterburner readings snapshot at crash:
    So everything looks good as far I as I can tell.  I'm running BF3 settings a little below high.  Game runs smooth with low temps.  Highest I've seen so far is 51C but I haven't been able to play longer than 15 minutes in a row.
    Any thoughts

    Quote from: Svet on 27-March-12, 16:36:12
    is your compueter stable if you use another video card?
    have you tested this video card in another computer?
    My system is stable and so is BF3 with other cards.  I upgraded to this card from a 9800 MX2, and that plus my 4 gigs of ram would play the game fine at low-medium for hours on end.
    I have tested the card in another computer but not with BF3.  I may be able to do that later this week.
    Any other thoughts?  Does my bios look right?
    Edit:  Just tried exact reference clock settings with 100% fan, still only lasted 5 minutes.

  • Nvidia GTX 560 Ti Twin Frozr, texture bugs in Arma2

    Hello,
    I suffer a severe problem on Arma2 with my GPU.
    Observed: Rapid texture flickering on objects at short, random intervals. Problem exacerbated when zooming in. Settles after some time but returns to flicker randomly.
    Behaves as though it's jumping to lower LODs because of lack of memory or something.
    htt p://i944.photobucket.com/albums/ad288/scajolly/helpme.jpg <--- Screenshot ( shows the problem on the left side, not on the right side.
    Attempted to change all individual graphical settings available in the game from lowest/off to highest, none sufficed to remove the bug (though of course I could not try all n^n combinations). Also tried Nvidia beta-driver, did nothing.
    Problem was reproduced on another computer which also used the same GPU (not got the specs for it yet though).
    The equipment used:
    CPU: Intel i5-2500k, 3.3GHz, OC'd to 4.2GHz
    MB: MSI P67A-C45 (MS-7673)
    Memory: 2x Corsair 4GB 1600 DDR3
    HD: Samsung HD502HJ ATA
    GPU: MSI Nvidia GeForce GTX 560 Ti Twin Frozr
    GPU driver: 295.73 (latest)
    OS: Win 7 64b
    PSU: CoolerMaster GX 550W 12V (beware, fault reproduced on a separate but similar rig with far bigger PSU)

    Hello Svet,
    No, I do not encounter issues in any other games.
    As an addendum, the above texture flickering will also occur when I am at stock CPU speed -- 3.3GHz.

  • GTX 560 Ti Hawk - advice to know if it ran out please

    Hi,
    I encounter since yesterday one of most problems others members have with their cards 560 ti (i've read lots of recent topics on the forum) :
    - video kernel display driver interrupts
    - every games come back to windows after some minutes
    - gpu usage in afterburner after crash : 4999999999999999 !!!
    Here is my config :
    Asus Sabertooth P67
    Core I5 2500K
    corsair vengeance 1600 8GO
    psu antec HCG 650W
    I've played intensively with this exact config all summer long and then it doesn't work anymore.
    I've tried recent and legacy nvidia drivers with driver sweeper proper uninstall.
    I didn't try bios update because i'm not sure i will succeed.
    Do you think i have to RMA, please ?
    Thanks for your attention (and sorry for my english, i'm fench)

    Hi again
    Strange thing : i changed (without any hope) the position of the switch on the card. It was in center position since I bought it, and it worked very well.
    - I put in through right (inside the pc) : no boot
    - I put in through left (rear pc) : card works perfectly --> 4 hours of shogun 2 instead of crashing after 2 minutes.
    What could be the technical explanation ?
    I spent a lot of time on forums since yesterday, about games, hardware and drivers, with a lot of topics about this kind of issues. I don't know if all graphic cards have this kind of switch... any rational explanation   
    Thanks

  • Gtx 560 Ti hawk random reboot and battlefield3 crash

    hi there, I already read problem in this forum, just want to make sure what should I do
    My problem:
    sometimes reboot while browsing
    sometimes reboot while doing any other activities
    battlefield3 crash after 5-15 minutes with smooth high graphic
    Already did:
    update latest driver
    lower gpu and vclok to 875 and 1050
    The problem still the same, I already see this topic https://forum-en.msi.com/index.php?topic=159746.0 , was that because of my power supply?
    my psu brand new strike x 600w 80 plus bronze
    and here my other spec:
    windows 7 ultimate 64-bit
    processor: i7-3770k CPU @ 3.50GHz
    Memory: 8gb RAM
    page file: 1705MB used, 14574 MB available
    DirectX 11
    I don't have another machine for try vcard :(
    please for the help

    Quote from: flobelix on 02-September-12, 19:46:00
    Since that psu has 50A on single +12v  that doesn't seem to be the issue.
    Get Afterburner and check temps:
    Ahh the psu exactly same with your link, I'll check temp later cz for now my cpu under repairing or reinstalling by technician, thanks for your big help, flobelix
    Quote from: Svet on 02-September-12, 22:35:54
    If you use another video card does your computer works stable?
    have you checked CPU underload temp ?
    Can you pass Prime95 testing over night without problems?
    Checked memory with
    What mainboard you have?
    in such case VGA is not even loaded/stressed,
    so possible the issue is somewhere else in your computer.
    Are you using msi vga drivers for your card from msi web?
    I have not used another card cz used to laptop user, and first time using desktop computer use that vcard, I'll check and test as your suggestion later cz of my reason above.
    mainbord : msi Z77MA-G45
    about vga driver, I used automatic update from: nvidia control panel -> help -> update, and I download then installed it become v3.xxx I didn't remember "xxx"
    thanks for your big help, Svet
    I'll posting again in this topic asap after my computer done for repair, cya next post. Thanks once again guys for your support

  • Re: MSI GTX 560 Ti HAWK Memory Temperature too high???

    wow, it was quick =)
    Temperature looks OK.
    Thanks once more.

    Dear MSI Support & all guys
    I bought a new gtx 960 but after i boot my pc sometimes it shows no display on monitor...sometimes it shows till windows loading but after that no display on monitor...i had worked out a temporary solution. When that happens...

  • GTX 560 TI HAWK 82-84'c at 100% fan speed

    Hello
    I've noticed my hawk becoming VERY loud while playing games, Final Fantasy XIV and Deus EX: Human Revolution to name a couple. I downloaded Afterburner to see what the temperatures were and I'm astounded to see my card at 82'c at near 100% fan speed. I have the fan profile on performance mode and I have a well ventilated Cooler Master Storm Sniper with 3 200mm fans at the top, front, and side and one 120mm fan at the rear. My ambient room temperature is about 24'c so it's not my room temp.
    Here's a screenshot while FF14 is running.
    Touching the side support brace bar is hot to the touch.
    EVERYTHING is at the default clock speed/voltage.
    I think the cooler or something with the card is defective!
    Should I set up a RMA ASAP?
    If I should:
    How long is the RMA process?
    Does MSI offer an advance RMA service similar to EVGA?

    Quote from: Henry on 19-October-11, 08:00:19
    If you don't cause any physical damage to the card there should be no problem.
     Svet, is that what you use to clean it, Jim Beam whiskey and a cross peen hammer to scrape the gooey stuff off? You should be using Everclear 190 proof instead, 151 proof at the very least.
     Maybe I should check mine just to be sure. I took a look at my 465 last week and found the HSF mounting screws were loose.
    Quote
    Svet, is that what you use to clean it, Jim Beam whiskey and a cross peen hammer to scrape the gooey stuff off? You should be using Everclear 190 proof instead, 151 proof at the very least.
    At final cleaning stage for old TIM [1st used the toilet paper, a special one, its doing excellent job for the task and its tenderly]
    then used this[dunno how they are called in English]:
    and then since the heatisnk surface and chip start shinning with light of clean and no any sign of TIm left,
    i used a drop of  Jim Beam whiskey over the
    then clean both surfaces again, then start cleaning them again with the same, but with dry one.
    Quote
    and a cross peen hammer to scrape the gooey stuff off?
    The Cross peen hammer on the photos is only for respect  and i don't use it of course
    Quote from: Newbie121 on 19-October-11, 19:41:06
    What are those arrows? is that where i get to unscrew the entire cooling pipes away from the graphic board?
    Just to check with you the pipes and fans are meant to be removed and installed back - right? I meant they are not glued or riveted in - correct?
    The arrows shows the 4 for screws which you have to unscrew 1st.
    Yes, they hold the entire heatsink+fans to the VGA's PCB
    Quote
    Just to check with you the pipes and fans are meant to be removed and installed back - right? I meant they are not glued or riveted in - correct?
    They are not riveted, only the screws hold them.
    There is TIM which works like a glue, which also holds the heatink to the GPU chip surface.
    Once you unscrew all 4 screws, then you need to take off the entire heatsink,
    don't use force, don't push it directly in up direction, start with small slides the entire heatsink as it makes contact with GPU's chip surface where the TIM is installed and works as glue, so start slide little by little, not too much and not too sharply cause the heatsink can hit and broke some of the PCB capacitors.
    Just use little and small slides until you feel that heatsink is now disconnected from the TIM/GPU surface, then take it off carefully.
    You have to disconnect FAN cable from PCB as well.

Maybe you are looking for

  • BDC while uploading one extra record is coming in Itab

    Hi while uploading data using FM am getting one extra record with few '0000000' kind of initial values for few of the fields like begda ,endda  and object id  code is like this, TYPES: BEGIN OF tt_record, plvar  type   hrp1000-plvar, otype  type   hr

  • PO notification mail

    Hello, We are on SRM 5.5 (Extended classic scenario), we upgraded our system recently (support pack) Before support pack, to generate a approval mail we stop the job (RBBP_NOTIFICATION_OFFAPP) and we execute the program RBBP_NOTIFICATION_OFFAPP/ RBBP

  • Offline backup error ERRORMESSAGE: Error 1495 in dmdb6bkp.c(1092)

    Hello Guru's we are using DB2 database and AIX OS,ECC 5.0. When we are trying to take offline backup ,the backup Scheduling failed due tot he below error. Kindly look and let me know to fix the issue ASAP. Offline backup error logfile. Job started St

  • Set report starting row to 1

    Dear all, I've got a page containing a tree and a report. The tree offers the categories and the report will show the corresponding articles. Problem: - click at the tree on a category (the report will be updated) - click on the report on the "next p

  • For find activated lync client using SCCM 2012

    Hi All, In my current company we have in deployed lync client. But we are not sure how many clients are activated. Is there any way to find which system got activated using SCCM 2012. Please suggest and let me know any reference. Thanks