NVIDIA GTX 960 2GDDR5 Support on MSI H81M-P33

I have motherboard: MSI H81M-P33 mother board. I'm planning to buy MSI GTX 960 2GDDR5.
Does this graphics support on this Board.
My PC Specs:
Board: MSI H81M-P33
Ram: 4GB DDR3 (planning for next 4GB)
Processor: i3 - 4130 4th generation
Any Review on this graphics card also appreciated.

google for reviews
found 1 for you: http://www.tweaktown.com/reviews/6967/msi-geforce-gtx-960-gaming-2g-oc-edition-video-card-review/index.html
you can read newegg feedbacks as well:
http://www.newegg.com/Product/Product.aspx?Item=N82E16814127843

Similar Messages

Screen resolution MSI Nvidia Gtx 960 Gaming 2 GB

i have a BenQ GL2750H and MSI Nvidia Gtx 960 Gaming 2 GB PCI-E Graphics Card but when my screen is at 1920x1080 (recommended) the picture, task bar goes off screen ?
is it a bad card ? or my screen doesn't work with it ?
i have attached a picture

You can adjust the desktop size and position under NVidia control panel or use your buttons on your screen. Have you tried them yet?

MSI H81M-P33 RAM Compatibility

Hey everyone.
I'm interested in buying this mobo, but I'm not sure wheter the MSI H81M-P33 is fully compatibile with the following:
DDR3 G.Skill Ripjaws X-F3-12800CL9D-4GBXL 1600 MHz 4 GB CL 9-9-9-24 1.5V
This RAM does not appear among the QVL memories on the mobo's page of MSI website.
Is is fully compatible or not?

Quote from: Nichrome on 25-September-14, 20:19:03
Have you checked the G Skill site to see which boards they have tested it with? http://www.gskill.com/en/product/f3-12800cl9d-4gbxl Your board is listed from their side
Then it should work I think.
Quote from: Nichrome on 25-September-14, 20:19:03
Do you own this RAM or plan to buy it? Because some users has been experiencing problems with GSkill RAM on MSI boards.
Yes, I plan to buy it for a new PC for a friend of mine.
I did not know there were known problems with GSkill RAM on MSI boards !!!
I own a GSkill Ripjaws pair (2x4 GB) on my own computer, with a MSI P67 GD-65... I've not experienced almost no problem at all until now (3 years).
A couple of times, when I open the chassis to clean the dust, my desktop refused to boot until I took off and placed back in the ram.

MSI H81M-P33 board and Intel i5 4670K OC is a no go...???

Hi to all, at first I intended to post this on normal thread but I was advised to post here,so...
I bought PC and the H81M-P33 is the board included.
CPU is Intel 4670K, PSU no name 500W, RAM goodram 4gb 1600MHZ, HDD WD blue 500GB SATA 3...and using integrated Intel GPU 4600...
I bought this CPU since after some time I could need some extra power, seller showed me parts that he will use to build this budget PC.
I saw OC on official MSI H81M-P33 web page so it looked fine to me.
BIOS on board was 7817v12.
First I tried OC Genie 4: Overclock in 1 Second...what a joke...OC nowhere in sight, and even manual OC was disabled...1600 MHz RAM was downclocked to 1333 MHz...
So I disabled OC genie to be able to try to even try to OC.
Amazing it virtually allowed me to OC CPU and I even could set RAM to 1600 MHz.
So...f10...reboot and voila OC was just virtual. Max speed was 3600 MHZ shown on CPU-z when I ran RealBench_v2.0b10_RC6_public_beta...
Frustrated...I downloaded new version of bios 7817v13, flashed it and now even more of MSI humor was revealed...now OC was disabled totally.
I am aware that this is low cost board, but misleading is misleading...or I am doing something wrong???

As I said I quote MSI info from their freaking official web site:
"OC Genie 4: Overclock in 1 Second
OC Genie 4 supercharges your speed experience! When used, OC Genie 4 accelerates your entire system and puts it into overdrive! Tuned by the professional overclockers, OC Genie 4 hands you record-breaking performance on a silver plate.
MSI Command Center is an user-friendly and easy to use app that lets you control every aspect of your motherboard with your mobile device."
After some lies about their board I even Googled a bit...
http://www.pcper.com/news/General-Tech/Breaking-Limitations-CPU-OC-ECS-H87-B85-and-H81-Motherboards
http://www.eteknix.com/biostar-enables-h87b85-overclocking-with-bios-update/
Sure it would be nice that retailer could test OC limitations by him self, or even I could do so before buying it...sarcasm...
As from start, I said none help was expected, no official nor one from MSI fans.
My post was suppsed to be purely informatonal for others that could search info on this board.
I would not be surpised to see my that my post was deleted since it shows official info is full of misleading lies.
RAM is
http://pameti.heureka.cz/goodram-ddr3-4gb-1600mhz-cl11-gr1600d364l11-4g/
What they state is what I get, can not see how it could be their fault???

Nvidia GTX 560 Ti support

Hello. I'll be buying a new PC. One important aspect of the new configuration for me is the support for linux. The hardware that I think most linux folks have problem with is the graphics card. I want you to give me your opinion on Nvidia GTX 560 Ti. How well does it perform on linux and are there any significant problems that I may encounter should I decide to buy it?

I have one, it has had a couple of issues with the open-source (nouveau) drivers in the past year which prevented booting for several kernel releases. If you use the propriety blob, you'll probably be okay.
Plays TF2 on Linux flawlessly.

MSI H81M-P33 V2 and i5 4670K (using Intel 4600) support dual monitors?

Pretty straightforward question - can I run two monitors at 1920x1080 off of the H81M-P33 V2 with i5 4670K (Intel 4600 vid)?
Thanks all

the board has full ties to both outputs and the DVI will use digital signals and the VGA will use the analogue ones so it should work fine using both at the same time as they are separate parts so should work fine!

MSI H81M-P33 Cpu Fan Speed Problem! Urgent

Hi. Bought a H81M-P33 board and got a problem.
I can´t increase my CPU fan Speed to maxium RPM . Tried to use Command Center and Board Bios without any sucess.
This leads to my cpu (i5 4670) getting hot with stock cooler. When I´m encoding a video it reaches 85º. The best solution I had was to connect CPU Fan to Chassis Fan slot on the motherboard and it increased speed, but still it doesn´t increase past a certain value.
What can I do to solve this problem? Tried everything without any luck. The board doesn´t handle CPU fan speed + temperatura increase well. Is not normal to have a CPU stock volts getting hot.
Thanks

I know that for sure XFM. The thing is that the board isn´t increasing CPU fan speed as it should. Ofc a better cooler would do the job, but even with stock cooler it can be cooler. The problem is that the fan is always in slow mode :|

Nvidia gtx 960 msi z97s sli krait edition

I didnt build this system I had Ibuypower build it my graphics card wont show bios or post screen but will show the windows no problem plays games great now looking on the msi site it says nothing about 960 being compatible why is this not and is there going to be a bios update that makes it cause I cant afford a new card at this point any options to make this work

>>Posting Guide<<
Did you try clear CMOS? >>Clear CMOS Guide<<
Also does your motherboard have modified BIOS (so it shows "ibuywpower" on boot) or standard BIOS (MSI, Asus etc) ?

Desktop screen flickers after updating my nvidia GTX 680m driver on my MSI GT70!

Hello, MSI!
Yesterday, I updated my MSI GT70 Dragon Edition's nvidia driver to the one suggested on my laptop'smsi page. Previously, It was running on the latest driver downloaded from nvidia itself (314.22) with no problems whatsoever. But I thought I'd give the msi's official driver a try, to see if it was better. The whole day, the laptop worked fine, even after restart, but after starting it and logging in today, the desktop screen was black and flickering. There was an Flickering error window that can't be read but the title that says ".net framework 4 error"!
Now I've googled the problem, and I might have found the solution, but I need to boot it to safe mode first, and I'm not able to. So if you, please, could tell me how to boot my GT70 to safe mode. Note that I'm not able to reach the "Run" window since the screen is black, and the laptop keeps restarting.
Awaiting you immediate response.
Thanks in advance.

Hello, flobelix!
Thanks for your instant reply.. and I'm sorry that I could not immediately reply as I lost the forum URL
Anyways, I solved the problem!!
I knew that the problem was caused by the driver update, so I decided to connect an external LCD monitor, and the desktop screen showed right away on it. I was curious, so I disconnected that external LCD monitor to see if the laptop's screen went back to normal, and it DID!!! Anyhow, I immediately reconnected the LCD monitor to completely delete the corrupted driver (v314.22) and reinstalled the same driver again...
And by the way, the suggested way of approaching the safe mode when the PC is not normally functioning did not work, whatsoever! I sat for at least two consecutive hours trying it.. in vein!
Again, thanks a lot.

Re: MSi H81M-P33 + G3258 + Windows 10

you can check this with MSI here: >>How to contact MSI.<<

Aye...but at least I know for sure now that it's the boards as the cpu is brand new

Iommu support for msi a55m-p33 and a55m-e33

Does anybody know if the 2 mobos will support iommu in the near future?

i'm talking about the socket fm2 boards btw

MSI GTX 960 GAMING VS MSI GTX 960 GAMING 100ME

Hello,
What is the difference between MSI GTX 960 GAMING 2G GDDR5 and MSI GTX 960 GAMING 100ME GDDR5 ??

Quote from: aatish579 on 08-May-15, 11:17:56
Does this card is supported on MSI H81m-p33 board?
it should be if you update the BIOS to the latest available (1.9) and have used the BIOS + ME update on it!

I have a question wirh the gtx 960

Hello i would like to know if gtx 960 is too bad for after effects because when i search for system requirements it says adobe certified gpu and the gtx 960 doesnt appear in adobe certified gpu and it is a good gpu i think so i want to know if it is bad and also i want to know which card is better NVIDIA QUADRO K620 OR NVIDIA GTX 960. Thanks

After Effects barely uses the GPU for anything except for one, obsolete thing. More info here: GPU (CUDA, OpenGL) features in After Effects
Now, some third-party effects like Red Giant's Universe and Video Copilot's Element 3d use the GPU, but their requirements are independent from AE's.

New computer using H81M-P33 Motherboard

I just put together a new computer with all new parts and this H81M-P33 motherboard is the motherboard I got for it. My problem is that there is no display coming from the computer.
I'm using on-board graphics and I don't have a graphics card. I've tried using a VGA and a DVI, neither displayed anything.
The processor is an Intel CORE i3-4130. and the power supply is a Corsair CX500.
Everything is connected properly, and the computer turns on, but there just isn't any display. It doesn't go to anywhere I can even go into the BIOS.
Any help is much appreciated and just ask if there's any other info you need from me.

Dears,
Perhaps this is due to issues with the 8 series chipsets and the Haswell Refresh CPUS. I found this thread in regards to your board, and am suffering from a very similar issue (no display after restart) on an H81M-E34 board.
Try updating the bios as the person in the following post has tried.
http://www.overclock.net/t/1494723/msi-h81m-p33-restart-not-working

H81M-P33 BIOS HELP PLEASE

I was doing a light gaming build for a customer (Pentium G3258 20th Anniversary edition, MSI H81m-P33 motherboard, 8gb ram and a MSI Gaming R9 270x).
When I went to overclock the board it wouldn't save settings so I updated the bios to the latest version + the intel management engine, it got to 100% after about 2 minuets like the last board I updated (I used this board for another customer and the update went okay) but when it rebooted it's now stuck on a black screen with only a _ showing in the top left corner.
I tried running it with only 1 stick of ram in different slots, with only integrated graphics but it still doesn't come on.
I can also reboot the computer by pressing ctrl, alt and delete at the same time but it just goes back to this screen
Does anyone know a fix? I can send the board back under warranty but I'd rather get it fixed ASAP as the customer is very excited to get their new computer!

Quote from: Chike on 10-May-15, 21:43:51
Any activity on the USB flash drive?
It had to update ME after the reboot, I assume that did not happen.
Non of my usb's have an activity light :(

NVIDIA GTX 960 2GDDR5 Support on MSI H81M-P33

Similar Messages

Maybe you are looking for