Nvidia gtx460 cooler problem

Hello there a have i little problem with my video card cooler the card has twin frozen II and one of this tiny coolers makes a noise i looked at him and its like is increasing and lowering the turations but its not happening all the time last time happened one moth and a half ago and in this period functioned without problems its started again a few days ago but again sometimes it makes noise sometimes not.Some people told me to put some special oil on it some advices please.

contact to reseller about it, you may need to return the VGA for repair/replacement

Similar Messages

  • KT3 Ultra 2 with Inno3d NVIDIA Geforce2 mx400 problems

    Having multiple problems playing games.
    Get this in event viewer (below) or the application will crash or get
    DSOD.
    STOP 0x0A, 0x01E, and 0x50 Errors. (IRQ_NOT_LESS_OR_EQUAL)
    Event Type: Error
    Event Source:     nv
    Event Category:   None
    Event ID:   8
    Date:       30/09/2003
    Time:       10:33:43
    User:       N/A
    Computer:   HOMEPC
    Description:
    Idle Timeout Error Channel 00000001.
    Some times it also complains about specific files such as ntoskernl.exe or nv4_disp.dll, but more often than not it wont complaine about files on the BSOD.
    Tried all drivers and drivers from NVIDIA (including generic).
    Read loads of forums about changing "Advanced Chipset features" in BIOS and
    downloading the latest via chipset drivers and running 3dmark benchmarks which crashes to desktop eventually.
    BIOS has been flashed with the latest from the website.
    I have run system diagnostics to make sure memory / processor are not
    faulty which they are not.
    I have even re-installed my OS to make sure there are no corruption but I still get the same problems.
    This happens on multiple games. I have also installed the NVIDIA version of
    graphics card which I borrowed and had exactly the same problem.
    Here is my PC details:-
    AMD Athlon 2100XP
    MSI - KT3 Ultra 2 motherboard.
    Dane Elec 256mb DDR 2100 ram
    120GB WD HDD
    Inno3d NVIDIA Geforce 2 MX400 with 64MB
    HP CDRW
    DVD ROM
    With a 400w power supply.
    All my hardware is approved for use with AMD processors with higher spec's than mine.
    Based on the fact that I have used another NVIDIA card in my PC plus rebuilding the OS, and got the same problems, I would say that there is a problem with the motherboard or BIOS settings.
    I'm more inclide to think it the motherboard as I have tried lots and lots of variations.
    Are there any tools to check the motherbaord?
    Has anyone come across these problems? I know that the games themselves can sometimes cause these, but I have checked to make sure I have patches installed and checked forums to see if other people suffer the same thing. But they don't.
    And 3dmark which crashes to the desktop whilst running through the tests must be another indication of problems. (Already checked for patches for 3dmark too)
    I know this is a forum, but i can't seem to find an offical way to complain to MSI. If any one knows, please send us a link!

    It looks as though this could be one of those classic cases where it could simply be overheating.
    I purchased a AXP2100BOX product when I first built my PC. This is an AMD package that contains the processor and the heatsink.
    However through my painstaking troubleshooting tactics, I think that the problem is where it overheats.
    The reason that first lead me to think that it could be this is because I downloaded the MSI core centre application and click on the Auto button. By doing this, the software automatically overclocks the processor, bumping up the FSB slowly. Eventually, it blue screens. I read somewhere that this is normal, just restart and the MSI software will now know what limits there are for over clocking.
    Well the error code that I got from the blue screen it produced, was not that different from the errors I get whist playing games.
    IRQ_NOT_LESS_OR_EQUAL.
    The error codes were different but it was still the same IRQ message.
    So I had a look around on the web to find out as much as possible about AMD's overheating and stumbled across reviews for " AXP2100BOX ", the processor/heatsink box product. All the reviews I came across said that there was a problem with overheating. I did check out reviews before I purchased the box product, but at the time it was fairly new.
    According to the AMD website, my processor is guaranteed to run up to 100'C.
    Now my processor runs at about 65'C on load, BUT this reading is from the fan on top of the heatsink, not the processor itself.
    So that's the theory so far. So can anyone recommend this biggest, bestest, and probably the most noisiest, heatsink you can buy.
    I'm also looking into changing my case as there are some nifty air shifters out there.
    Check this link out for the ultimate cooling solution. (Get your wallet out!)
    http://www.vapochill.com

  • Windows 7 x64  Boot Camp 3.1 Nvidia 8600M GT problem

    Hi,
    I'm running windows 7 ultimate x64. I also run snow leopard and had the corresponding version of boot camp installed (3.0 I believe).
    I installed bootcamp 3.1 when the apple software update suggested it. It said it installed but on reboot it has messed up my graphics card - in device manager it shows as an unknown device. I can't install any nvidia drivers (they just fail saying that nothing was altered), I've tried uninstalling bootcamp 3.1 and reinstallling 3.0 but it's still the same - no graphics drivers and I can't install any new ones?
    How can I get the nvidia drivers to install? I've tried from all sorts of sources and no luck. I tried using drivesweeper to clean the drivers off (after uninstaling them) but on reboot it says the same ones are still there. What do I have to do to undo the damage Apple have done?
    thanks for any help,
    Jez

    Hrm, it's been ages since the op, but here's my 2 cents.
    I have a macbook pro with windows 7 ultimate x64 installed through bootcamp 3.1. Here is how I ensure clean driver installs.
    1. Download Driver Sweeper
    2. Install
    (make sure to let driver sweeper run as admin)
    3. Uninstall graphics driver
    4. Reboot into safe mode
    5. run driver sweeper
    6. check nvidia display box
    7. click analyze
    (should list all the nvidia related files, folder, registry entries left behind)
    8. click clean
    9. reboot normally
    10. reinstall desired graphics driver
    (i use 197.16 w/out any problems so far)
    11. reboot
    Also, as a nice, but probably not necessary step, when I'm in safe mode and after I have used driver sweeper, I like to run Auglogics Boostspeed to do a quick junk file scan, track eraser scan, and advanced registry scan before I reboot normally. This is the method I use whenever I install/uninstall graphics drivers. I've never had to deal with bad installs since I started to use this method.
    This method works with all driver types listed in driver sweeper and if it's something not listed in driver sweeper, I've found doing a reg/file clean in safe mode with a reliable cleaner does the trick.
    If it's still not working I'd restore to before bootcamp installation or uninstall bootcamp and the graphics driver. Do a reg/file clean. Finally reinstall bootcamp, and restart from step 3 listed above.
    IF IT STILL doesn't work out, I'd do a fresh reinstall following this guide:
    http://www.simplehelp.net/2009/01/15/using-boot-camp-to-install-windows-7-on-you r-mac-the-complete-walkthrough/
    Hope this helps.

  • [Partly solved] Nouveau driver crashes, nvidia-libgl-beta problem etc.

    I had the same issue as in thread 1446984 but disabling USB 3.0 in BIOS did not solve the problem.
    I have a new install, and are getting complete freezes on shutdown, but also on switching to another tty than the graphical (freeze after 1-20 seconds after switching tty). This is reproducible 100% of the time.
    I were also getting errors about nouveau, and thought the tty switching freezes might be related to that.
    This was correct, since installing the nvidia-beta driver solved that problem (but not the shutdown issues).
    As a side note, I also had some minor problems installing nvidia-libgl-beta which is a dependency for nvidia-beta.
    Trying to install it with aura gave the following error:
    $ sudo aura -A nvidia-libgl-beta
    [sudo] password for rix:
    aura >>= The following are not AUR packages:
    nvidia-libgl-beta
    aura >>= No valid packages specified.
    Installing it manually from the tarball in AUR seemed to work, but when I tried to install nvidia-beta it complained about nvidia-libgl-beta missing, and it's not in the output of pacman -Q !
    Trying to reinstall it works as well, and pacman says it is reinstalling with net upgrade size 0.
    I removed nvidia-libgl-beta as a dependency from the nvidia-beta PKGBUILD and installed it, it seems to work at least, no more tty switch crashes.
    Also, after installing there is no nvidia*.pkg.tar.xz files in /var/cache/pacman/pkg/. Maybe these are put somewhere else?
    dmesg (includes nouveau errors but it's the "ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion ..." line I believe is the interesting one):
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1a4daa5b-c2e9-44c0-9155-95a9d2c25878 rw cryptdevice=UUID=67ed3f10-6bc9-4413-b567-f9f0111aecf0:cryptroot resume=/dev/mapper/lvm-swapvol quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba004fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ba005000-0x00000000ba00bfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000ba00c000-0x00000000ba7abfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ba7ac000-0x00000000baa1afff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000baa1b000-0x00000000cb3c9fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cb3ca000-0x00000000cb453fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cb454000-0x00000000cb46efff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cb46f000-0x00000000cb9ddfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cb9de000-0x00000000cbffefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fdfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.8 present.
    [ 0.000000] DMI: Micro-Star International Co., Ltd. GS60 2PE/MS-16H2, BIOS E16H2IMS.106 05/13/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x42fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
    [ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
    [ 0.000000] 2 base 0420000000 mask 7FF0000000 write-back
    [ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
    [ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
    [ 0.000000] 5 base 00CE000000 mask 7FFE000000 uncachable
    [ 0.000000] 6 base 00CD000000 mask 7FFF000000 uncachable
    [ 0.000000] 7 base 042FE00000 mask 7FFFE00000 uncachable
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xcc000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x42fc00000-0x42fdfffff]
    [ 0.000000] [mem 0x42fc00000-0x42fdfffff] page 2M
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x42c000000-0x42fbfffff]
    [ 0.000000] [mem 0x42c000000-0x42fbfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x400000000-0x42bffffff]
    [ 0.000000] [mem 0x400000000-0x42bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xba004fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0xb9ffffff] page 2M
    [ 0.000000] [mem 0xba000000-0xba004fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xba00c000-0xba7abfff]
    [ 0.000000] [mem 0xba00c000-0xba1fffff] page 4k
    [ 0.000000] [mem 0xba200000-0xba5fffff] page 2M
    [ 0.000000] [mem 0xba600000-0xba7abfff] page 4k
    [ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xbaa1b000-0xcb3c9fff]
    [ 0.000000] [mem 0xbaa1b000-0xbabfffff] page 4k
    [ 0.000000] [mem 0xbac00000-0xcb1fffff] page 2M
    [ 0.000000] [mem 0xcb200000-0xcb3c9fff] page 4k
    [ 0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xcbfff000-0xcbffffff]
    [ 0.000000] [mem 0xcbfff000-0xcbffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
    [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x374fa000-0x37a74fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 MSI_NB)
    [ 0.000000] ACPI: XSDT 0x00000000CB459098 0000B4 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000CB466618 00010C (v05 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000CB4591E0 00D433 (v02 MSI_NB MEGABOOK 00000030 INTL 20120711)
    [ 0.000000] ACPI: FACS 0x00000000CB9DC080 000040
    [ 0.000000] ACPI: APIC 0x00000000CB466728 000092 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 0x00000000CB4667C0 000044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: ASF! 0x00000000CB466808 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: MSDM 0x00000000CB4668B0 000055 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: LPIT 0x00000000CB466908 00005C (v01 MSI_NB MEGABOOK 00000000 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000CB466968 000228 (v01 INTEL sensrhub 00000000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000CB466B90 00018F (v01 Intel zpodd 00001000 INTL 20120711)
    [ 0.000000] ACPI: SLIC 0x00000000CB466D20 000176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 0x00000000CB466E98 000575 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000CB467410 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
    [ 0.000000] ACPI: MCFG 0x00000000CB467EE8 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000CB467F28 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000CB467F60 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000CB468278 003550 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 0x00000000CB46B7C8 00143A (v01 SgRef SgPeg 00001000 INTL 20120711)
    [ 0.000000] ACPI: DMAR 0x00000000CB46CC08 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
    [ 0.000000] ACPI: SSDT 0x00000000CB46CCC0 001472 (v01 OptRef OptTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042fdfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x42fdfffff]
    [ 0.000000] NODE_DATA [mem 0x42fdf6000-0x42fdfafff]
    [ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f400000-ffff88042f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x42fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xba004fff]
    [ 0.000000] node 0: [mem 0xba00c000-0xba7abfff]
    [ 0.000000] node 0: [mem 0xbaa1b000-0xcb3c9fff]
    [ 0.000000] node 0: [mem 0xcbfff000-0xcbffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x42fdfffff]
    [ 0.000000] On node 0 totalpages: 4173553
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12934 pages used for memmap
    [ 0.000000] DMA32 zone: 827733 pages, LIFO batch:31
    [ 0.000000] Normal zone: 52216 pages used for memmap
    [ 0.000000] Normal zone: 3341824 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xcd200000-0xcf1fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xba005000-0xba00bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xba7ac000-0xbaa1afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb3ca000-0xcb453fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb454000-0xcb46efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb46f000-0xcb9ddfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb9de000-0xcbffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcc000000-0xccffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88042fa00000 s86784 r8192 d23808 u262144
    [ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4108318
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1a4daa5b-c2e9-44c0-9155-95a9d2c25878 rw cryptdevice=UUID=67ed3f10-6bc9-4413-b567-f9f0111aecf0:cryptroot resume=/dev/mapper/lvm-swapvol quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 16347668K/16694212K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 346544K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 67108864 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2494.320 MHz processor
    [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.50 BogoMIPS (lpj=8314400)
    [ 0.000024] pid_max: default: 32768 minimum: 301
    [ 0.000029] ACPI: Core revision 20140424
    [ 0.009832] ACPI: All ACPI Tables successfully acquired
    [ 0.010517] Security Framework initialized
    [ 0.010521] Yama: becoming mindful.
    [ 0.011207] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.013363] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.014280] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.014292] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.014481] Initializing cgroup subsys memory
    [ 0.014494] Initializing cgroup subsys devices
    [ 0.014498] Initializing cgroup subsys freezer
    [ 0.014500] Initializing cgroup subsys net_cls
    [ 0.014502] Initializing cgroup subsys blkio
    [ 0.014521] CPU: Physical Processor ID: 0
    [ 0.014521] CPU: Processor Core ID: 0
    [ 0.014525] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.015291] mce: CPU supports 9 MCE banks
    [ 0.015301] CPU0: Thermal monitoring enabled (TM1)
    [ 0.015311] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    tlb_flushall_shift: 6
    [ 0.015382] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
    [ 0.015942] ftrace: allocating 20434 entries in 80 pages
    [ 0.022339] dmar: Host address width 39
    [ 0.022341] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.022348] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
    [ 0.022349] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.022352] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
    [ 0.022353] dmar: RMRR base: 0x000000cbe94000 end: 0x000000cbea2fff
    [ 0.022354] dmar: RMRR base: 0x000000cd000000 end: 0x000000cf1fffff
    [ 0.022418] IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
    [ 0.022419] HPET id 0 under DRHD base 0xfed91000
    [ 0.022420] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.022530] Enabled IRQ remapping in x2apic mode
    [ 0.022531] Enabling x2apic
    [ 0.022532] Enabled x2apic
    [ 0.022541] Switched APIC routing to cluster x2apic.
    [ 0.022958] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056020] smpboot: CPU0: Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz (fam: 06, model: 3c, stepping: 03)
    [ 0.056031] TSC deadline timer enabled
    [ 0.056047] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.056060] ... version: 3
    [ 0.056061] ... bit width: 48
    [ 0.056061] ... generic registers: 4
    [ 0.056062] ... value mask: 0000ffffffffffff
    [ 0.056063] ... max period: 0000ffffffffffff
    [ 0.056063] ... fixed-purpose events: 3
    [ 0.056064] ... event mask: 000000070000000f
    [ 0.079493] x86: Booting SMP configuration:
    [ 0.079494] .... node #0, CPUs: #1
    [ 0.093398] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.100083] #2 #3 #4 #5 #6 #7
    [ 0.220438] x86: Booted up 1 node, 8 CPUs
    [ 0.220442] smpboot: Total of 8 processors activated (39925.00 BogoMIPS)
    [ 0.226421] devtmpfs: initialized
    [ 0.228397] PM: Registering ACPI NVS region [mem 0xba005000-0xba00bfff] (28672 bytes)
    [ 0.228398] PM: Registering ACPI NVS region [mem 0xcb46f000-0xcb9ddfff] (5697536 bytes)
    [ 0.228983] pinctrl core: initialized pinctrl subsystem
    [ 0.229021] RTC time: 0:23:19, date: 08/15/14
    [ 0.229056] NET: Registered protocol family 16
    [ 0.229128] cpuidle: using governor ladder
    [ 0.229129] cpuidle: using governor menu
    [ 0.229147] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.229148] ACPI: bus type PCI registered
    [ 0.229150] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.229202] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.229203] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.229261] PCI: Using configuration type 1 for base access
    [ 0.243279] ACPI: Added _OSI(Module Device)
    [ 0.243281] ACPI: Added _OSI(Processor Device)
    [ 0.243282] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.243283] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.245353] ACPI Error: No handler for Region [EC__] (ffff88041f03bc18) [EmbeddedControl] (20140424/evregion-162)
    [ 0.245356] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-299)
    [ 0.245358] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC__._REG] (Node ffff88041f03ecf8), AE_NOT_EXIST (20140424/psparse-536)
    [ 0.246040] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.286406] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.299829] ACPI: Dynamic OEM Table Load:
    [ 0.299835] ACPI: SSDT 0xFFFF880418CB3000 0003EA (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
    [ 0.313292] ACPI: Dynamic OEM Table Load:
    [ 0.313298] ACPI: SSDT 0xFFFF880418D31000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
    [ 0.326537] ACPI: Dynamic OEM Table Load:
    [ 0.326541] ACPI: SSDT 0xFFFF880418D01A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
    [ 0.354461] ACPI: Interpreter enabled
    [ 0.354467] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.354471] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.354482] ACPI: (supports S0 S3 S4 S5)
    [ 0.354483] ACPI: Using IOAPIC for interrupt routing
    [ 0.354500] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.371125] ACPI: Power Resource [PG00] (on)
    [ 0.385654] ACPI: Power Resource [FN00] (off)
    [ 0.385699] ACPI: Power Resource [FN01] (off)
    [ 0.385742] ACPI: Power Resource [FN02] (off)
    [ 0.385786] ACPI: Power Resource [FN03] (off)
    [ 0.385831] ACPI: Power Resource [FN04] (off)
    [ 0.386362] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.386366] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.386519] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
    [ 0.386601] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
    [ 0.386931] PCI host bridge to bus 0000:00
    [ 0.386933] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.386935] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.386936] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.386937] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.386938] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.386939] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.386940] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.386940] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.386941] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.386942] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.386943] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff]
    [ 0.386948] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [ 0.387008] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [ 0.387033] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.387061] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.387093] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [ 0.387101] pci 0000:00:02.0: reg 0x10: [mem 0xf6400000-0xf67fffff 64bit]
    [ 0.387105] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.387108] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.387156] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
    [ 0.387162] pci 0000:00:03.0: reg 0x10: [mem 0xf7414000-0xf7417fff 64bit]
    [ 0.387235] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [ 0.387251] pci 0000:00:14.0: reg 0x10: [mem 0xf7400000-0xf740ffff 64bit]
    [ 0.387303] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.387325] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.387356] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [ 0.387373] pci 0000:00:16.0: reg 0x10: [mem 0xf741e000-0xf741e00f 64bit]
    [ 0.387429] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.387490] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [ 0.387508] pci 0000:00:1a.0: reg 0x10: [mem 0xf741c000-0xf741c3ff]
    [ 0.387586] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.387623] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.387656] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [ 0.387670] pci 0000:00:1b.0: reg 0x10: [mem 0xf7410000-0xf7413fff 64bit]
    [ 0.387730] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.387754] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.387784] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [ 0.387850] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.387876] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.387902] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
    [ 0.387968] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.387994] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.388018] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
    [ 0.388084] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.388110] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.388133] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
    [ 0.388199] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.388225] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.388261] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [ 0.388279] pci 0000:00:1d.0: reg 0x10: [mem 0xf741b000-0xf741b3ff]
    [ 0.388358] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.388395] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.388428] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
    [ 0.388564] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [ 0.388578] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
    [ 0.388584] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
    [ 0.388591] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
    [ 0.388597] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
    [ 0.388618] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 0.388625] pci 0000:00:1f.2: reg 0x24: [mem 0xf741a000-0xf741a7ff]
    [ 0.388658] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.388708] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [ 0.388721] pci 0000:00:1f.3: reg 0x10: [mem 0xf7419000-0xf74190ff 64bit]
    [ 0.388739] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.388833] pci 0000:01:00.0: [10de:1199] type 00 class 0x030200
    [ 0.388840] pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
    [ 0.388847] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.388854] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.388858] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    [ 0.388863] pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref]
    [ 0.388900] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 0.393257] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.393259] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.393261] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff]
    [ 0.393264] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.393341] acpiphp: Slot [1] registered
    [ 0.393351] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.393425] acpiphp: Slot [1-1] registered
    [ 0.393435] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.393439] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
    [ 0.393443] pci 0000:00:1c.2: bridge window [mem 0xf6800000-0xf71fffff]
    [ 0.393448] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
    [ 0.393716] pci 0000:04:00.0: [1969:e091] type 00 class 0x020000
    [ 0.394035] pci 0000:04:00.0: reg 0x10: [mem 0xf7300000-0xf733ffff 64bit]
    [ 0.394138] pci 0000:04:00.0: reg 0x18: [io 0xc000-0xc07f]
    [ 0.395629] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.395860] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.400012] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.400015] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
    [ 0.400019] pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
    [ 0.400137] pci 0000:05:00.0: [8086:08b1] type 00 class 0x028000
    [ 0.400192] pci 0000:05:00.0: reg 0x10: [mem 0xf7200000-0xf7201fff 64bit]
    [ 0.400431] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
    [ 0.400485] pci 0000:05:00.0: System wakeup disabled by ACPI
    [ 0.406642] pci 0000:00:1c.4: PCI bridge to [bus 05]
    [ 0.406647] pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
    [ 0.406725] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.414012] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.414043] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.414073] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.414102] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.414131] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.414160] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.414189] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.414217] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 0.414398] ACPI: Enabled 6 GPEs in block 00 to 3F
    [ 0.414425] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.414488] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.414490] vgaarb: loaded
    [ 0.414491] vgaarb: bridge control possible 0000:00:02.0
    [ 0.414510] PCI: Using ACPI for IRQ routing
    [ 0.415717] PCI: pci_cache_line_size set to 64 bytes
    [ 0.415760] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.415762] e820: reserve RAM buffer [mem 0xba005000-0xbbffffff]
    [ 0.415763] e820: reserve RAM buffer [mem 0xba7ac000-0xbbffffff]
    [ 0.415764] e820: reserve RAM buffer [mem 0xcb3ca000-0xcbffffff]
    [ 0.415765] e820: reserve RAM buffer [mem 0x42fe00000-0x42fffffff]
    [ 0.415845] NetLabel: Initializing
    [ 0.415846] NetLabel: domain hash size = 128
    [ 0.415847] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.415856] NetLabel: unlabeled traffic allowed by default
    [ 0.415875] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.415879] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.417907] Switched to clocksource hpet
    [ 0.421100] pnp: PnP ACPI init
    [ 0.421109] ACPI: bus type PNP registered
    [ 0.421154] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.421156] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.421271] system 00:01: [io 0x0680-0x069f] has been reserved
    [ 0.421272] system 00:01: [io 0xffff] has been reserved
    [ 0.421274] system 00:01: [io 0xffff] has been reserved
    [ 0.421275] system 00:01: [io 0xffff] has been reserved
    [ 0.421276] system 00:01: [io 0x1c00-0x1cfe] has been reserved
    [ 0.421278] system 00:01: [io 0x1d00-0x1dfe] has been reserved
    [ 0.421279] system 00:01: [io 0x1e00-0x1efe] has been reserved
    [ 0.421280] system 00:01: [io 0x1f00-0x1ffe] has been reserved
    [ 0.421281] system 00:01: [io 0x1800-0x18fe] could not be reserved
    [ 0.421283] system 00:01: [io 0x164e-0x164f] has been reserved
    [ 0.421284] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.421306] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.421336] system 00:03: [io 0x1854-0x1857] has been reserved
    [ 0.421337] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.421368] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.421370] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.421401] pnp 00:05: Plug and Play ACPI device, IDs ETD0301 PNP0f13 SYN1500 SYN0002 (active)
    [ 0.421425] pnp 00:06: Plug and Play ACPI device, IDs MSI0007 PNP030b (active)
    [ 0.428497] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.428499] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.428500] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.428501] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.428502] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.428503] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.428504] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 0.428505] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.428507] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.428508] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.428509] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
    [ 0.428510] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
    [ 0.428512] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.428661] pnp: PnP ACPI: found 8 devices
    [ 0.428662] ACPI: bus type PNP unregistered
    [ 0.434525] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.434527] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.434529] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    [ 0.434547] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.434548] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.434549] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.434553] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
    [ 0.434557] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
    [ 0.434559] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.434560] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.434562] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.434564] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff]
    [ 0.434566] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.434568] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.434571] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.434574] pci 0000:00:1c.0: bridge window [mem 0xcf200000-0xcf3fffff]
    [ 0.434578] pci 0000:00:1c.0: bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
    [ 0.434583] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.434585] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
    [ 0.434594] pci 0000:00:1c.2: bridge window [mem 0xf6800000-0xf71fffff]
    [ 0.434597] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
    [ 0.434602] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.434604] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
    [ 0.434608] pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
    [ 0.434614] pci 0000:00:1c.4: PCI bridge to [bus 05]
    [ 0.434619] pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
    [ 0.434625] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.434627] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.434628] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.434628] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.434629] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.434630] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.434631] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.434632] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.434633] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.434634] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff]
    [ 0.434635] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.434636] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff]
    [ 0.434637] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.434638] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.434639] pci_bus 0000:02: resource 1 [mem 0xcf200000-0xcf3fffff]
    [ 0.434640] pci_bus 0000:02: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref]
    [ 0.434641] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.434642] pci_bus 0000:03: resource 1 [mem 0xf6800000-0xf71fffff]
    [ 0.434643] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf2afffff 64bit pref]
    [ 0.434644] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
    [ 0.434645] pci_bus 0000:04: resource 1 [mem 0xf7300000-0xf73fffff]
    [ 0.434646] pci_bus 0000:05: resource 1 [mem 0xf7200000-0xf72fffff]
    [ 0.434665] NET: Registered protocol family 2
    [ 0.434817] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.434957] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.435058] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.435070] TCP: reno registered
    [ 0.435083] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.435119] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.435175] NET: Registered protocol family 1
    [ 0.435185] pci 0000:00:02.0: Boot video device
    [ 0.468054] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
    [ 0.468062] PCI: CLS 64 bytes, default 64
    [ 0.468102] Unpacking initramfs...
    [ 0.532072] Freeing initrd memory: 5612K (ffff8800374fa000 - ffff880037a75000)
    [ 0.532091] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.532093] software IO TLB [mem 0xc73ca000-0xcb3ca000] (64MB) mapped at [ffff8800c73ca000-ffff8800cb3c9fff]
    [ 0.532304] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 0.532341] Scanning for low memory corruption every 60 seconds
    [ 0.532551] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.532785] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.533736] zbud: loaded
    [ 0.533873] VFS: Disk quotas dquot_6.5.2
    [ 0.533900] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.533989] msgmni has been set to 31940
    [ 0.534033] Key type big_key registered
    [ 0.534168] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.534218] io scheduler noop registered
    [ 0.534220] io scheduler deadline registered
    [ 0.534251] io scheduler cfq registered (default)
    [ 0.534366] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
    [ 0.534677] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.534686] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.534714] vesafb: mode is 2880x1620x32, linelength=11520, pages=0
    [ 0.534715] vesafb: scrolling: redraw
    [ 0.534716] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.534738] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90005c00000, using 18240k, total 18240k
    [ 0.822629] Console: switching to colour frame buffer device 360x101
    [ 1.110079] fb0: VESA VGA frame buffer device
    [ 1.110094] intel_idle: MWAIT substates: 0x42120
    [ 1.110095] intel_idle: v0.4 model 0x3C
    [ 1.110096] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 1.110313] GHES: HEST is not enabled!
    [ 1.110361] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.110652] Linux agpgart interface v0.103
    [ 1.110693] rtc_cmos 00:02: RTC can wake from S4
    [ 1.110794] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 1.110819] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.110828] Intel P-state driver initializing.
    [ 1.110838] Intel pstate controlling: cpu 0
    [ 1.110854] Intel pstate controlling: cpu 1
    [ 1.110867] Intel pstate controlling: cpu 2
    [ 1.110879] Intel pstate controlling: cpu 3
    [ 1.110891] Intel pstate controlling: cpu 4
    [ 1.110899] Intel pstate controlling: cpu 5
    [ 1.110911] Intel pstate controlling: cpu 6
    [ 1.110923] Intel pstate controlling: cpu 7
    [ 1.111000] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.111276] TCP: cubic registered
    [ 1.111504] NET: Registered protocol family 10
    [ 1.111971] NET: Registered protocol family 17
    [ 1.112783] registered taskstats version 1
    [ 1.114136] Magic number: 10:956:354
    [ 1.114303] rtc_cmos 00:02: setting system clock to 2014-08-15 00:23:19 UTC (1408062199)
    [ 1.114490] PM: Checking hibernation image partition /dev/mapper/lvm-swapvol
    [ 1.114497] PM: Hibernation image not present or could not be loaded.
    [ 1.116376] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
    [ 1.116380] Write protecting the kernel read-only data: 8192k
    [ 1.121213] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
    [ 1.123178] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
    [ 1.135874] random: systemd-tmpfile urandom read with 4 bits of entropy available
    [ 1.136933] systemd-udevd[80]: starting version 215
    [ 1.139538] device-mapper: uevent: version 1.0.3
    [ 1.139594] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
    [ 1.149753] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.156378] ACPI: bus type USB registered
    [ 1.156404] usbcore: registered new interface driver usbfs
    [ 1.156415] usbcore: registered new interface driver hub
    [ 1.156476] usbcore: registered new device driver usb
    [ 1.156933] SCSI subsystem initialized
    [ 1.162079] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.162996] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.163041] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.163214] ehci-pci: EHCI PCI platform driver
    [ 1.163316] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 1.163320] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.163332] ehci-pci 0000:00:1a.0: debug port 2
    [ 1.164275] libata version 3.00 loaded.
    [ 1.164967] AVX2 version of gcm_enc/dec engaged.
    [ 1.167248] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.167266] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf741c000
    [ 1.175425] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.175578] hub 1-0:1.0: USB hub found
    [ 1.175582] hub 1-0:1.0: 2 ports detected
    [ 1.175779] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 1.175783] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.175793] ehci-pci 0000:00:1d.0: debug port 2
    [ 1.179710] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.179723] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf741b000
    [ 1.179857] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.188804] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.188987] hub 2-0:1.0: USB hub found
    [ 1.188991] hub 2-0:1.0: 2 ports detected
    [ 1.189214] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.189222] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 1.189323] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.189343] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
    [ 1.189561] hub 3-0:1.0: USB hub found
    [ 1.189580] hub 3-0:1.0: 14 ports detected
    [ 1.192223] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.192226] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 1.192336] hub 4-0:1.0: USB hub found
    [ 1.192347] hub 4-0:1.0: 6 ports detected
    [ 1.193001] usb: failed to peer usb4-port6 and usb3-port4 by location (usb4-port6:none) (usb3-port4:usb4-port4)
    [ 1.193002] usb usb4-port6: failed to peer to usb3-port4 (-16)
    [ 1.193002] usb: port power management may be unreliable
    [ 1.193071] ahci 0000:00:1f.2: version 3.0
    [ 1.193201] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.193239] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x10 impl SATA mode
    [ 1.193241] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 1.193733] scsi0 : ahci
    [ 1.193850] scsi1 : ahci
    [ 1.193946] scsi2 : ahci
    [ 1.194041] scsi3 : ahci
    [ 1.194109] scsi4 : ahci
    [ 1.194177] scsi5 : ahci
    [ 1.194201] ata1: DUMMY
    [ 1.194201] ata2: DUMMY
    [ 1.194202] ata3: DUMMY
    [ 1.194203] ata4: DUMMY
    [ 1.194205] ata5: SATA max UDMA/133 abar m2048@0xf741a000 port 0xf741a300 irq 44
    [ 1.194206] ata6: DUMMY
    [ 1.482494] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 1.512521] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.513764] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
    [ 1.513768] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 1.513770] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.514950] ata5.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
    [ 1.514953] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.516323] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
    [ 1.516327] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 1.516329] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.517496] ata5.00: configured for UDMA/133
    [ 1.517668] scsi 4:0:0:0: Direct-Access ATA HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
    [ 1.520380] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.520382] sd 4:0:0:0: [sda] 4096-byte physical blocks
    [ 1.520463] sd 4:0:0:0: [sda] Write Protect is off
    [ 1.520466] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.520499] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.535828] tsc: Refined TSC clocksource calibration: 2494.224 MHz
    [ 1.594508] sda: sda1 sda2 sda3 sda128
    [ 1.595313] sd 4:0:0:0: [sda] Attached SCSI disk
    [ 1.606608] hub 1-1:1.0: USB hub found
    [ 1.606671] hub 1-1:1.0: 6 ports detected
    [ 1.712720] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.836976] hub 2-1:1.0: USB hub found
    [ 1.837108] hub 2-1:1.0: 8 ports detected
    [ 1.996416] usb 3-5: new low-speed USB device number 2 using xhci_hcd
    [ 2.173583] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.175034] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.176842] usbcore: registered new interface driver usbhid
    [ 2.176844] usbhid: USB HID core driver
    [ 2.177298] input: Mouse USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:FFC0:0040.0001/input/input2
    [ 2.177340] hid-generic 0003:FFC0:0040.0001: input,hidraw0: USB HID v1.11 Mouse [Mouse USB Laser Mouse] on usb-0000:00:14.0-5/input0
    [ 2.239993] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
    [ 2.403591] usb 2-1.8: new full-speed USB device number 3 using ehci-pci
    [ 2.491845] hid-generic 0003:1770:FF00.0002: hiddev0,hidraw1: USB HID v1.10 Device [MSI EPF USB MSI EPF USB] on usb-0000:00:1d.0-1.8/input0
    [ 2.537099] Switched to clocksource tsc
    [ 9.125249] random: nonblocking pool is initialized
    [ 15.501907] NET: Registered protocol family 38
    [ 17.087530] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 18.229927] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
    [ 18.534354] systemd-udevd[279]: starting version 215
    [ 18.952256] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0D:00/input/input3
    [ 18.952469] ACPI: Fan [FAN0] (off)
    [ 18.952491] ACPI: Fan [FAN1] (off)
    [ 18.952509] ACPI: Fan [FAN2] (off)
    [ 18.952526] ACPI: Fan [FAN3] (off)
    [ 18.952543] ACPI: Fan [FAN4] (off)
    [ 18.955614] ACPI: Lid Switch [LID0]
    [ 18.955655] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 18.955658] ACPI: Power Button [PWRB]
    [ 18.955686] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 18.955687] ACPI: Power Button [PWRF]
    [ 18.966606] wmi: Mapper loaded
    [ 19.047576] thermal LNXTHERM:00: registered as thermal_zone0
    [ 19.047578] ACPI: Thermal Zone [TZ00] (28 C)
    [ 19.047729] thermal LNXTHERM:01: registered as thermal_zone1
    [ 19.047730] ACPI: Thermal Zone [TZ01] (30 C)
    [ 19.050742] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 19.068816] thermal LNXTHERM:02: registered as thermal_zone2
    [ 19.068818] ACPI: Thermal Zone [THRM] (53 C)
    [ 19.071927] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
    [ 19.071931] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 19.124018] [drm] Initialized drm 1.1.0 20060810
    [ 19.155967] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 19.191918] ACPI: Battery Slot [BAT1] (battery present)
    [ 19.198641] ACPI: AC Adapter [ADP1] (on-line)
    [ 19.201166] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
    [ 19.230883] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.320790] mousedev: PS/2 mouse device common for all mice
    [ 19.340987] input: MSI WMI hotkeys as /devices/virtual/input/input8
    [ 19.350216] iTCO_vendor_support: vendor-support=0
    [ 19.357069] [drm] Memory usable by graphics device = 2048M
    [ 19.357071] [drm] Replacing VGA console driver
    [ 19.357073] checking generic (d0000000 11d0000) vs hw (d0000000 10000000)
    [ 19.357074] fb: switching to inteldrmfb from VESA VGA
    [ 19.357086] Console: switching to colour dummy device 80x25
    [ 19.360084] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 19.360106] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
    [ 19.360171] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 19.375453] i915 0000:00:02.0: irq 46 for MSI/MSI-X
    [ 19.375461] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 19.375462] [drm] Driver supports precise vblank timestamp query.
    [ 19.375480] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 19.396788] [drm] VBT doesn't support DRRS
    [ 19.413293] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [44:8a:5b:6f:c3:57]
    [ 19.434956] cfg80211: Calling CRDA to update world regulatory domain
    [ 19.465506] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465534] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465555] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465575] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465588] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465603] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465625] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465673] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 19.518669] Bluetooth: Core ver 2.19
    [ 19.518681] NET: Registered protocol family 31
    [ 19.518682] Bluetooth: HCI device and connection manager initialized
    [ 19.518688] Bluetooth: HCI socket layer initialized
    [ 19.518689] Bluetooth: L2CAP socket layer initialized
    [ 19.545919] Bluetooth: SCO socket layer initialized
    [ 19.545920] systemd-udevd[296]: renamed network interface eth0 to enp4s0
    [ 19.555627] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
    [ 19.579086] fbcon: inteldrmfb (fb0) is primary device
    [ 19.634446] usbcore: registered new interface driver btusb
    [ 19.647874] Bluetooth: hci0: read Intel version: 370710018002030d00
    [ 19.662947] MXM: GUID detected in BIOS
    [ 19.663037] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 19.663093] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 19.663229] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
    [ 19.663230] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
    [ 19.672404] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 19.672404] Copyright(c) 2003- 2014 Intel Corporation
    [ 19.672511] iwlwifi 0000:05:00.0: irq 47 for MSI/MSI-X
    [ 19.774284] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
    [ 19.803544] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f00)
    [ 19.804987] iwlwifi 0000:05:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
    [ 19.820975] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0e.
    [ 19.908919] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
    [ 19.956219] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
    [ 20.011971] iwlwifi 0000:05:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
    [ 20.012015] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
    [ 20.012231] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
    [ 20.155135] Adding 16777212k swap on /dev/mapper/lvm-swapvol. Priority:-1 extents:1 across:16777212k FS
    [ 20.301346] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    [ 20.329844] systemd-udevd[285]: renamed network interface wlan0 to wlp5s0
    [ 20.646833] Console: switching to colour frame buffer device 360x101
    [ 20.661807] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 20.661808] i915 0000:00:02.0: registered panic notifier
    [ 20.684762] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
    [ 20.707714] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
    [ 20.707767] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:44/LNXVIDEO:00/input/input9
    [ 20.708831] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 20.708889] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
    [ 20.708952] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 20.709072] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e4190a2
    [ 20.709074] nouveau [ DEVICE][0000:01:00.0] Chipset: GK104 (NVE4)
    [ 20.709075] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
    [ 20.709094] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
    [ 20.709100] nouveau [ VBIOS][0000:01:00.0] ... signature not found
    [ 20.709101] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
    [ 20.709410] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
    [ 20.709527] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
    [ 20.778578] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
    [ 20.778580] nouveau [ VBIOS][0000:01:00.0] using image from PROM
    [ 20.778686] nouveau [ VBIOS][0000:01:00.0] BIT signature found
    [ 20.778688] nouveau [ VBIOS][0000:01:00.0] version 80.04.ef.00.21
    [ 20.778987] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
    [ 20.778994] nouveau [ VBIOS][0000:01:00.0] running init tables
    [ 20.968712] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
    [ 20.968772] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
    [ 20.968830] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
    [ 21.009002] sound hdaudioC1D0: autoconfig: line_outs=2 (0x15/0x1b/0x0/0x0/0x0) type:speaker
    [ 21.009005] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 21.009006] sound hdaudioC1D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
    [ 21.009007] sound hdaudioC1D0: mono: mono_out=0x0
    [ 21.009008] sound hdaudioC1D0: dig-out=0x1e/0x0
    [ 21.009009] sound hdaudioC1D0: inputs:
    [ 21.009010] sound hdaudioC1D0: Mic=0x18
    [ 21.009011] sound hdaudioC1D0: Internal Mic=0x12
    [ 21.016614] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input14
    [ 21.016783] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
    [ 21.016842] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
    [ 21.043492] nouveau 0000:01:00.0: irq 50 for MSI/MSI-X
    [ 21.043506] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
    [ 21.043546] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
    [ 21.043547] nouveau [ PFB][0000:01:00.0] RAM size: 3072 MiB
    [ 21.043548] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
    [ 21.045953] nouveau [ VOLT][0000:01:00.0] GPU voltage: 600000uv
    [ 21.074609] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
    [ 21.074615] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
    [ 21.074622] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
    [ 21.074643] nouveau [ CLK][0000:01:00.0] 07: core 324-405 MHz memory 648 MHz
    [ 21.074686] nouveau [ CLK][0000:01:00.0] 0a: core 405-967 MHz memory 1620 MHz
    [ 21.074757] nouveau [ CLK][0000:01:00.0] 0e: core 405-967 MHz memory 4000 MHz
    [ 21.074843] nouveau [ CLK][0000:01:00.0] 0f: core 405-967 MHz memory 5000 MHz
    [ 21.074913] nouveau [ CLK][0000:01:00.0] --: core 324 MHz memory 648 MHz
    [ 21.113338] nouveau E[ PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x400700 [ IBUS ]
    [ 21.113368] vga_switcheroo: enabled
    [ 21.113471] [TTM] Zone kernel: Available graphics memory: 8177794 kiB
    [ 21.113473] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 21.113473] [TTM] Initializing pool allocator
    [ 21.113477] [TTM] Initializing DMA pool allocator
    [ 21.113484] nouveau [ DRM] VRAM: 3072 MiB
    [ 21.113485] nouveau [ DRM] GART: 1048576 MiB
    [ 21.113487] nouveau [ DRM] TMDS table version 2.0
    [ 21.113489] nouveau [ DRM] DCB version 4.0
    [ 21.119681] nouveau [ DRM] MM: using COPY for buffer copies
    [ 21.119686] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 1
    [ 21.347781] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 21.985072] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 21.993709] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 26.353187] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 26.353470] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
    [ 26.353475] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 28.489788] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 28.566055] systemd-journald[255]: Received request to flush runtime journal from PID 1
    [ 28.853911] systemd-journald[255]: File /var/log/journal/2083dda0e63b4e6cad96cc755ad72173/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 30.756848] alx 0000:04:00.0: irq 51 for MSI/MSI-X
    [ 30.757162] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
    [ 30.759420] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
    [ 30.759647] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
    [ 30.771168] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
    [ 30.780781] nouveau E[ PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x400700 [ IBUS ]
    [ 33.277389] nouveau E[ PGRAPH][0000:01:00.0] HUB_INIT timed out
    [ 33.277393] nouveau E[ PGRAPH][0000:01:00.0] 409000 - done 0x00000220
    [ 33.277397] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
    [ 33.277401] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000006 0x00000001
    [ 33.277403] nouveau E[ PGRAPH][0000:01:00.0] 502000 - done 0x00000340
    [ 33.277408] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x80000000 0x00006500 0x00000000 0x00000000
    [ 33.277414] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000002 0x00000000
    [ 33.277415] nouveau E[ PGRAPH][0000:01:00.0] 50a000 - done 0x00000340
    [ 33.277421] nouveau E[ PGRAPH][0000:01:00.0] 50a000 - stat 0x80000000 0x00008e00 0x00000000 0x00000000
    [ 33.277426] nouveau E[ PGRAPH][0000:01:00.0] 50a000 - stat 0x00000000 0x00000000 0x00000002 0x00000000
    [ 33.277428] nouveau E[ PGRAPH][0000:01:00.0] 512000 - done 0x00000300
    [ 33.277433] nouveau E[ PGRAPH][0000:01:00.0] 512000 - stat 0x00000000 0x00017f00 0x00000000 0x00000000
    [ 33.277439] nouveau E[ PGRAPH][0000:01:00.0] 512000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
    [ 33.277441] nouveau E[ PGRAPH][0000:01:00.0] 51a000 - done 0x00000300
    [ 33.277446] nouveau E[ PGRAPH][0000:01:00.0] 51a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
    [ 33.277451] nouveau E[ PGRAPH][0000:01:00.0] 51a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
    [ 33.277452] nouveau E[ PGRAPH][0000:01:00.0] init failed, -16
    [ 34.226370] cfg80211: Calling CRDA to update world regulatory domain
    [ 36.247358] fuse init (API version 7.23)
    [ 39.340754] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 39.341033] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
    [ 39.341037] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 53.952829] systemd-journald[255]: File /var/log/journal/2083dda0e63b4e6cad96cc755ad72173/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 54.363832] nouveau E[ DRM] failed to idle channel 0xcccc0000 [DRM]
    [ 54.477547] pci_pm_runtime_suspend(): nouveau_pmops_runtime_suspend+0x0/0xe0 [nouveau] returns -16
    [ 60.362546] wlp5s0: authenticate with 94:44:52:dc:db:bf
    [ 60.365767] wlp5s0: send auth to 94:44:52:dc:db:bf (try 1/3)
    [ 60.367581] wlp5s0: authenticated
    [ 60.370498] wlp5s0: associate with 94:44:52:dc:db:bf (try 1/3)
    [ 60.374426] wlp5s0: RX AssocResp from 94:44:52:dc:db:bf (capab=0x411 status=0 aid=3)
    [ 60.375328] wlp5s0: associated
    [ 60.375354] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
    journalctl -x:
    -- Logs begin at Thu 2014-08-14 21:31:47 CEST, end at Fri 2014-08-15 02:25:40 CEST. --
    Aug 14 21:31:47 riXmsi systemd[579]: Starting Paths.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Aug 14 21:31:47 riXmsi systemd[579]: Reached target Paths.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Aug 14 21:31:47 riXmsi systemd[579]: Starting Timers.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Aug 14 21:31:47 riXmsi systemd[579]: Reached target Timers.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Aug 14 21:31:47 riXmsi systemd[579]: Starting Sockets.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Aug 14 21:31:47 riXmsi systemd[579]: Reached target Sockets.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Aug 14 21:31:47 riXmsi systemd[579]: Starting Basic System.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Aug 14 21:31:47 riXmsi systemd[579]: Reached target Basic System.
    -- Subject: Unit UNIT

    keyboard and mouse are now auto-detected. Do you have xf86-input-evdev installed? If so, you do not need to explicitly set the drivers for keyboard and mouse in xorg.conf. You can try it out if you like.

  • W530 Nvidia Discrete Mode - problems in PowerPoint and Excel

    Hi, I've experienced problems with window refreshing in PowerPoint and Excel while running W530 in Nvidia Discrete Mode. While creating and wiewing PowerPoint 2007 presentation in normal view the slides' miniatures are not refreshing when selected. While viewing worksheet in Excel with border lines applied to cells they are not refreshing after scrolling down so the screen becomes completely unreadable. The problem does not exist in Optimus or Integrated mode.
    Solved!
    Go to Solution.

    Yeah, all updated via Lenovo "System update" and Windows update. I have not checked if the problem exists in newer versions of Microsoft Office - I'm using 2007. What is interesting in Optimus mode on external monitor running on Nvidia everything is OK - no display refreshing in Powerpoint and Excel is present only in Discrete Mode.
    W530 (2447-2BG)i7-3720QM(2.60GHz, 20GB RAM,500GB 7200rpm HD,15.6in
    1600x900 LCD,Intel HD Graphics,CDRW/DVDRW,Intel 802.11agn wireless,WWAN
    option,Bluetooth,1Gb Ethernet,UltraNav,Secure Chip,Fingerprint reader,Camera,9c
    Li-Ion,Win7 Pro 64

  • Nvidia 295.40 Problems Using XBMC Assaultcube or anything with(SOLVED)

    The title pretty much sums it up , Ever since I updated to 295.40 . The previous driver 295.33 was working fine .  Problems Using XBMC , Wine , Assaultcube or anything with uses Open GL .  The two machines that are affected have the same hardware ( Nvidia 6200 pci) . Let me know if any of you are having similar issues . I will continue to work on this for a couple of hours .  Thanks .
    Last edited by sliposk (2012-05-03 18:47:26)

    Tried upgrading the nvidia package after upgrading linux to 3.3.2 but with no success, it still freezes…
    Gusar wrote:As I wrote in the other thread, the main point of 295.40 is to fix security vulnerabilities. So if you want to use older versions, at least patch them: http://www.nvnews.net/vbulletin/showthread.php?t=178006
    Tried to patch 295.33, successfully (making a 295.33-3 package to stay clean), but had the same failures and freezes. Looks like the problem we are experiencing is caused by the security fix…

  • Premiere CC 2014.1 and Nvidia GTX 980 problem

    Installed my new GTX 980. One problem that came up is intermittant crashing when all screens flash black followed by an error code "3" stating there is a problem with the video driver. I must reboot system. Nvidia says its a TDR problem and I must contact the developer of Premiere to get a fix? Any help out there?

    Hi OCA,
    I verified this on both Mac and Windows. Thanks for reporting this, and sorry if this causes you workflow issues. I filed a bug about this. Please file a bug report, as well: http://adobe.ly/ReportBug
    All others affected by this bug, please also file a bug report. I would like to see this get fixed ASAP. Your bug reports will assist that.
    Thanks,
    Kevin

  • Nvidia tools/Installation problems with Photoshop

    Hey guys,so,i have photoshop cs2,i installed nvidia tools,but they wont work,they dont even show up,so i googeled arround,and i read that they only work if the version is in english,now i wanna install photoshop in english again,but no matter how often i install it again(i deleted all file sfrom photoshop and photoshop itself,before i reinstalled)it is ll the time still in german,what should i do?,is there any way to fix that,or is there any possibility to get nvidia tools working in german as well?thank you guys.

    Ramon,
    Thanks for the input. However I tried that already with the same results.
    Have no problem with Lightroom 2.2 just Photoshop CS3.
    Sent Adobe a message with this problem via their support section, however they just closed the case and more or less stated my time has expired. So now I am at a stand still with CS3.
    My next option is just do a complete re-install of Leopard as I do have everything backed up via Time Machine.
    In the mean time I found a program called Pixelmator that works just fine until I am able find a solution for this problem.

  • Lib32-nvidia-utils version problem [Solved]

    Hi,
    first of all sorry if this is the wrong place to put this secondly I'd have a go myself in fixing this but i'm not that comfortable in package building just yet.
    I notice there has been an update to the lib32-nvidia-utils package on 2010-09-15 which is currently conlicting with the x86_64 nvidia package (last updated on 2010-09-01) due to version numbering.
    the x86_64 nvidia driver version is currently at 256.53-1 and the  lib32-nvidia-utils  is currently at 256.53-2
    due to this mismatch in version the X server will not start. can the maintainers either update the x86_64 nvidia package and the x86_64 nvidia-utils package to version 256.53-2 or rollback the lib32-nvidia-utils to 256.53-1 please
    I only managed to fix this problem on my system by installing the older version lib32-nvidia-utils package I had in the "/var/cache/pacman/pkg/" folder but for someone working from a fresh build of arch will bugger them right up.
    Last edited by balasarius (2010-10-06 15:20:10)

    OK call me an absolute  NOOB!!!
    I spent nearly 3 hours last night getting the same version mismatch error with nvidia 256.53-1  and lib32-nvidia-utils 256.53-2  doing that exact same thing I've just done to try and recreate the error,  and now the thing wants to work.
    there must be little gremlins living in my machine driving me potty.
    if I make any more topics like this that turn in to a load of waffle then feel free to pick up a plank of 2x4 (a.k.a. The I.T. Educator) and crack me over the head with it

  • V570 Nvidia display driver problem

    Hi,
    I just bought a laptop Lenovo V570 with the serial nr.: 59-3157502y. When i try to instal the nvidia display driver i get the message: "This graphics driver could not find compatible graphics hardware".
    Please give a solution how to fix this problem. I had high expectations for this product....
    Tks

    In the drop down list you're picking Geforce 500 series, you should be picking Geforce 500M series (notebook)

  • Nvidia FX5200 capture problems. Success story

    Hi,
    I had the problem that many other people had. The vivo functionality will not work when capturing with thes standard drivers. Blue screes, one frame, reseting...
    I have gone trough most of this. Here is a solution that worked to me at first sight.
    I checked the link
    http://www.microsoft.com/downloads/details.aspx?FamilyID=8dfd1b6d-e177-4a0e-91d0-b4310675b02b&displaylang=en ( thanks Deathstalker for pointing to this).
    Download the patch.
    Then I went to
    http://www.nvidia.com/object/IO_20011119_6301.html
    And followed the instrcutions.
    Everything worked fine at first try.
    FYI..... if it can help anybody.
    JCG
    PD: My card was an FX5200 T ultra vivo 256MB

    This f&%k&$#ing card hanged again.... it just takes more time...
    No solution fo the problem. Disregard the message please.
    JCG

  • Help me! Having CPU Cooling problems!

    Howdy
    I'm having serious problems with my P.C. I have recently upgraded my PC's processor from a celeron 2 ghz to Intel Pentium 4 3.2GHz 478Pin 1Mb Cache 800MHz FSB Processor Prescott, I Installed the processor with the standard Intel Heatsink and core centre was telling me that the CPU was running at around 59+ degrees celcius 138+ degrees farenheit at idle.
    I thought that this was a little hot at my celaron didn't push past 45 degrees c. while idling
    I thought nothing of it putting it down to faster cpu high temperature... I decided to run a game to see the difference my hard earned cash had made, the first thing that came to hand was "The Sims 2" which ran perfectly on my celaron if not a little boggy at times.
    The game booted quicker and i got into a game to see how much smoother it was running and the game hung.
    I thought that maybe it was a because it had a new processor and it needed a reboot, which i did and i checked out the game again and it did exactly the same thing.
    I thought that maybe the cpu was getting a bit hot so i turned the machine off and went out the next day to purchase another couple of coolingfans to create more convection in the case.
    I fitted the fans dragging air from the front and the side and blowing out of the back, this had an effect on the temperature of the cpu but not by much, It was now running at 52 to 55 degrees at ldle (at the Bios)
    I decided that this temperature at idle was too high and the fact that fact that it was crashing games (That my girlfriend likes to play) I thought that I would take the leap to liquid cooling so I purchased the Coolermaster Aquagate liquid cooling system I installed the system and fired my system up it was still reading at 52 degrees at the bios.
    When the machine got to windows the temperature slowly increased and when I tried to run the same game it crashed ( due to what i found later was the processor throttling to prevent damage)  
    One thing that i found strange was the temperature on the gauge of the AQUAGATE which has a hardwire temperature sensor that sits on top of the di of the processor and that was reading around 27 degrees at the bios.
    I thought that it may have been a faulty processor so i sent the processor back and recieved a replacement which had the same problem although alot worse ( 65-70 degrees at the bios)
    I have sent that one back and I'm awaiting the replacement.
    I would like to know if there is actually a problem with the motherboard itself or just a problem with the temperature sensor settings in the bios.
    or if there is a bios update that can prevent my processor from throttling and crashing everything.
    Please help as I really like this Motherboard and I can't afford to buy a new one.
    Matt

    Howdy all!
    Got my chip back from novatech, I updated the Bios to V2.5, ditched Corecentre and replaced it with speed fan (pretty cool!).
    Put the chip in and everything seems to be running okay...ish
    The only thing that's bothering me a little is that its still posting temperatures of around 48 degrees C, at idle.
    which is okay but I'm using a watercooling system so I thought that it would be a lot lower than that I am aware that Prescotts do run hot but i didn't think that it would be this hot.
    Maybe I'm being dumb and this is a good temperarture but I was hoping that It may be a bit lower so I could maybe overclock it.
    Could anyone suggest anything I could do to bring the temperature down a tad?
    Many Thanks to Danny and Dcasole that pointed me in the right direction with the BIOS, my girlfriend can now play The Sims 2 and will stop nagging me, so thank you from the bottom of my heart.

  • NVidia Desktop Manager problems

    The NVidia Desktop Manager (the icon that's created in the system tray) is causing me some grief.
    If I right click on it, the display will blank for a few seconds.  This happens with the three different driver/util versions and doesn't happen with my AGP card installed.
    Anyone else having this problem, and is there a way to fix it?  No info found on NVIDIAs site or the newsgroups.
    Cheers,
    -lajaro

    NView DM also interferes (somewhat) with my Habu mouse.

  • NVIDIA installer and problems [yes I know I got the kernel]

    all should work fine, but dont! I get this: [i have linux264 under /usr/src]
    -> No precompiled kernel interface was found to match your kernel; would you li
       ke the installer to attempt to download a kernel interface for your kernel f
       rom the NVIDIA ftp site (ftp://download.nvidia.com)? (Answer: No)
    -> No precompiled kernel interface was found to match your kernel; this means
       that the installer will need to compile a new kernel interface.
    -> Using the kernel source path '/usr/src/linux-2.6.4/' as specified by the
       '--kernel-source-path' commandline option.
    -> Kernel source path: '/usr/src/linux-2.6.4/'
    -> Performing cc_version_check with CC="cc".
    ERROR: Unable to determine the NVIDIA kernel module filename.
    ERROR: Installation has failed.  Please see the file
           '/var/log/nvidia-installer.log' for details.  You may find suggestions
           on fixing installation problems in the README available on the Linux
           driver download page at www.nvidia.com.
    WIKI says sth about copying the old files to /tmp and then back again. well it's too late for that . I have the arch-pkg but couldn't found those files. maybe one can name me which they are where I can find them and if is going to solve the above problem. I have the standard ide kernel.
    thank you

    the files you removed are either all in the kernel you downloaded or can be created from that kernel.
    you need a .config file, which will be created when you do what i said in my previous post and i believe you need some include files in the /usr/src/linux-2.6.4/include/config directory, which will be put there when you do the make. (just don't do make install!)
    when you do the make config, just make sure loadable modules support is a yes, the rest can be default i would guess.
    if you really want a .config file for a 2.6.4 scsi kernel i'll put one up here:
    http://www.oreycay.com/config.bz2
    i think you should just answer all defaults and make your own.  im pretty sure the nivida installer is just checking for these files, it is not really using them in a way you have to worry about.

  • [SOLVED] Nvidia 302.17 problems

    Downloaded the bumblebee packages from AUR today. Problem is when i try make the package (nvidia-utils-bumblebee), it can't download the file from nvidia. When i checked the nvidia ftp there is no 302.17 folder or 302.17 files. It goes up to 302.11.
    The lib32 version of that package seems fine. Only difference i found in the PKGBUILD file is the ftp adress.
    Changed the PKGBUILD for nvidia-utils-bumblebee to the same ftp adress as the lib32 version. tried makepkg --skipchecksum just to see if the package is downloaded. Well, it's downloading, but it's downloading a 302.11 file.
    Someone has any idea?
    Last edited by melw (2012-06-18 17:54:58)

    Well, that made the difference
    I just changed from ftp://download.... to http://us.download.. in the PKGBUILD.
    Thanks!

Maybe you are looking for

  • 785GM-E65 can´t install windows or format HDD

    i just bought this board and install it with some of my older pc components including my 1TB HDD, it used to have my old windows 7 installation. I installed this board and boot on my old windows 7 installation but when windows logo appear it automati

  • Hub 3 needs to be restarted every day to restore s...

    Hi Every day, our Hub 3 needs restarting to restore our speed. It has been constantly 37+ MBPS for months. Recently, both wired LAN and wireless connections have slowed to 3Mbps. Speeds checked on BT Wholesale Speedchecker, Lan and Wifi All ususal ch

  • HT201401 My iphone4s struggles to open when the home button is pressed,seems blurd and grainy

    When pressing the home button on my iPhone 4S it has started to struggle and appear grainy and slow, tho it works well after that.

  • Press ctrl+sht+F9 from when button press trigger.

    I am using oracle forms 10g. Is ther a way to press ctrl+sht+F9 automatically when user press button on the form? I have a window programm runiing on the window which has a hot key set as (ctrl+sht+F9 ) when user clicks button it passes certain value

  • Upload excel and update infotype 8

    Hi I got excel sheet with Emp ID, grade and Level.  Using this excel sheet I needed to update all the employees  grade and level (Info type 8 group and level). Please let me know how to upload it. Regards, Sebastian  John Excel sheet format is Emp  I