NVIDIA Optimus driver problem

Hi
This is the third time I'm reinstalling Arch because of the driver issue with Nvidia Optimus.
I'm running Arch on Asus U36SG with the optimus technology Nvidia and Intel.
I have tried like 10 different approaches regarding installation of drivers. The last attempt was when following instructions
from this site: https://wiki.archlinux.org/index.php/Bumblebee.
The step I tried was installing  Installing Bumblebee with Intel / nvidia but later Arch was complaining about the nouveau driver missing
when running optirun glxgears -info. So i try installing nouveau but when finished Arch freezes with blank screen on reboot. So i had to reinstall Arch again.....
Can someone plz give me a correct step by step procedure on how to install these drivers?
Tanks in advance

This is the result when typing command lspci -v | less regarding VGA
VGA compatible controller: NVIDIA Corporation GF119 [GeForce 610M] (rev a1) (prog-if 00 [VGA controller])
        Subsystem: ASUSTeK Computer Inc. Device 2111
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at db000000 (32-bit, non-prefetchable) [size=16M]
        Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Memory at d0000000 (64-bit, prefetchable) [size=32M]
        I/O ports at d000 [size=128]
        Expansion ROM at dc000000 [disabled] [size=512K]
        Capabilities: <access denied>
        Kernel driver in use: nouveau
VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev
09) (prog-if 00 [VGA controller])
        Subsystem: ASUSTeK Computer Inc. Device 2111
        Flags: bus master, fast devsel, latency 0, IRQ 49
        Memory at dc400000 (64-bit, non-prefetchable) [size=4M]
        Memory at b0000000 (64-bit, prefetchable) [size=256M]
        I/O ports at e000 [size=64]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915

Similar Messages

  • W540 - Nvidia Optimus Driver Update - upgrade query

    Is there a chance that Lenovo will certify the latest mobile/quadro drivers for use on the W540 - the March 5th release seems to have it's core Nvidia driver elements made from Nvidia Drivers which date back to Q3 2013 -325.xx?
    The first time I noticed this was in my failed attempt to play BF4 on my machine - if anyone has any success in getting BF4 to run on their W540 - (I have the Nvidia K2100) but the game launcher prompts that I don't have a supported driver version - I had some success disabling optimus (switching to advanced in bios), installing the driver on discrete only (advanced) and all this does is allow me to skip the driver check (but the game run horribly - looks like it runs from the intel HD gpu only?)
    So in other words could Lenovo distribute an optimus driver which takes in the latest enhcancements made to the latest Nvidia/quadro WHQL (latest being 340.52 WHQL released on the 10th of July 2014!).
    I'm by no means an expert on drivers/certication - I have only dabbled in tweaking/editing ini files and some Nvidia inspector on my Desktops - but i don't think it's a stretch to assume the improvements/bug fixes made in later driver versions are worthwhile being added to the Lenovo system - Aside from my laptop's secondary function to play a few games, It's a workstation - any "free" improvement to the performance of Solidworks would be welcomed.
    Alternately, has anyone had success installing/adding optimus drivers from other sources? - Not expecting Lenovo to inform me of this but if any of the other users have had success I might be inclined to try other solutions

    It looks like you've mentioned it, but changing the video mode to "Advanced" in the bios (despite it saying something about the dock) let me install the drivers.  I had the same problem where the installer kept rejecting me saying that my card is not supported before switching that setting.
    With the official driver, I have not had any problems with it switching to discrete graphics.  In the Nvidia Control Panel, try enabling the option "Show Notification Tray Icon" under View and you'll have a little square icon in your system tray that lights up when the Quadro is being used (yes, it'll light up for fullscreen apps that you alt-tab out of).  For cases where it doesn't activate for certain programs, you *must* create an .exe profile and enable discrete mode in that profile.

  • V570 Nvidia display driver problem

    Hi,
    I just bought a laptop Lenovo V570 with the serial nr.: 59-3157502y. When i try to instal the nvidia display driver i get the message: "This graphics driver could not find compatible graphics hardware".
    Please give a solution how to fix this problem. I had high expectations for this product....
    Tks

    In the drop down list you're picking Geforce 500 series, you should be picking Geforce 500M series (notebook)

  • New install on new mobo (nVidia chipset): driver problem

    I've just installed Arch on my new PC but, for some reason, it doesn't seem to be recognising the hardware, viz. the nVidia MCP67 chipset.  Here's the lspci:
    00:00.0 RAM memory: nVidia Corporation Unknown device 0547 (rev a2)
    00:01.0 ISA bridge: nVidia Corporation Unknown device 0548 (rev a2)
    00:01.1 SMBus: nVidia Corporation Unknown device 0542 (rev a2)
    00:01.3 Co-processor: nVidia Corporation Unknown device 0543 (rev a2)
    00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
    00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
    00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
    00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
    00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
    00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
    00:08.0 PCI bridge: nVidia Corporation Unknown device 0561 (rev a2)
    00:09.0 IDE interface: nVidia Corporation Unknown device 0550 (rev a2)
    00:0a.0 Ethernet controller: nVidia Corporation Unknown device 054c (rev a2)
    00:0b.0 PCI bridge: nVidia Corporation Unknown device 0562 (rev a2)
    00:0c.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
    00:0d.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
    00:0e.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
    00:0f.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
    00:10.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
    00:11.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    02:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900 GS] (rev a1)
    03:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
    And here's the lspci from my ubuntu install:
    00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
    00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
    00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
    00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2)
    00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
    00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
    00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
    00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
    00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
    00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
    00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2)
    00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
    00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
    00:0b.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:0e.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:0f.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:10.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:11.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    02:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900 GS] (rev a1)
    03:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
    Can anyone tell me what module I need to load (configure MODULES= in rc.conf) to get it working?
    btw, here's the MODULES= stuff from my current rc.conf:
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(e1000e forcedeth slhc snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
    Last edited by Shagbag (2008-09-16 17:10:25)

    It boots Ubuntu fine.  Arch linux doesn't complain either.  I only found out about the problem when I tried to pacman -Syu straight after the install - there was no networking.  ifconfig had done its job but there was no routing table.  I manually added route add default gw 192.168.0.1 and edited /etc/resolv.conf to make sure I could get to my router but, again, it wouldn't work.  The forcedeth module had been loaded (ethernet driver) so I took a look at lspci (details in very first post) and can see that it's appears to be an issue with the PCI bus (the ethernet hangs off the PCI bus)I ran hwdetect --modules and pasted the output into /etc/rc.conf and rebooted.  Still no joy. 
    The mobo is an ASRock 939N68PV-GLAN.  It has an nVidia chipset (GeForce 7050 NB + nForce 630A MCP SB).  From my lspci results it would appear the problem is with the 630A MCP.  As Ubuntu works and Arch doesn't I'm perplexed.  And yes I've googled and followed what little help there is around.  Nothing has worked so far.  Hopefully someone will have experienced a problem with either the same mobo or the 630A MCP and they can tell me what needs to be done.
    Last edited by Shagbag (2008-09-19 08:50:21)

  • BSOD in Windows 7 x64 Nvidia Graphics Driver problem Is there a solution

    Help me!!! This looks familiar =)
    I have just came out of the multiple BSOD in windows 7 and have been on the BSOD Microsoft Boat for about 2 weeks. 
    Stats:
    Asus MotherBoard, amd fx 8core processor, nvidia graphics card, 650watt power supply
    This is crap  an has to stop, Is there any help.
    NVLDDMKM.sys is obviosly the culprate ...

    So I disabled the driver using the right mouse click on the computer icon in the start menu yeah the Icons are huge but as long as I dont get the BSOD I can live with that thankx
    lol
    Once again its on!!! lol
    Please start by updating NVLDDMKM.sys driver. You can also report that to NVIDIA Technical Support.
    If this does not help, proceed like that:
    Update all possible drivers
    Uninstall all unused programs
    Run chkdsk /r /f and sfc /scannow
    Perform a clean boot: http://support.microsoft.com/kb/929135
    Disable temporary all security softwares you have
    Run memtest86+ to check your RAM. If an error was detected then replace the faulty RAM or contact your manufacturer Technical Support for assistance
    This
    posting is provided "AS IS" with no warranties or guarantees , and confers no rights.   
    Microsoft
    Student Partner 2010 / 2011
    Microsoft
    Certified Professional
    Microsoft
    Certified Systems Administrator: Security
    Microsoft
    Certified Systems Engineer: Security
    Microsoft
    Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
    Microsoft
    Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
    Microsoft
    Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
    Microsoft
    Certified Technology Specialist: Windows 7, Configuring
    Microsoft
    Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
    Microsoft Certified IT Professional: Enterprise Administrator
    Microsoft Certified IT Professional: Server Administrator
    Microsoft Certified Trainer

  • Nvidia 5664 driver problem

    Hi,
    When I remove/uninstall version 5664 windows loses the ability to open any folders on my pc. Everthing else works fine ( i.e if it has a start menu entry or shortcut it's useable) but I cant access any folders. This is a recreatable fault, as I can return to a drive image of the system prior to removing that driver, but if i do remove it for the standard vga or any other driver, I lose access to folders. Windows just pauses for a while, then the "open with" which application box appears, as though it's an unknown file extension type. Anyone know how to correct this or heard of this?
    Im running win me with a p4 and gf3 ti 500.
    cheers
    chasers

    go to http://www.driverheaven.net/cleaner/
    to download Driver Cleaner. Run it then install the driver again

  • NVIDIA Optimus Display Driver 8.17.12.76​58 has a problem

    TVSU spends a long time downloading the package and then close with the message that the update did not install. Going to Lenovo's driver matrix the following link results in a Page Not Found.
    This driver is a valid update for my T520.There is an obvious cataloging problem here.
    NVIDIA Optimus Display Driver
    83de44ww.exe
    201.27 MB
    Windows 7 64bit
    8.17.12.7658
    25 Apr 2012 
    T520 4239-CTO
    T61/p 6459-CTO (Gone but not forgotten)
    A31/p XP Pro 1 gig memory
    A30/p XP Pro 1 gig memory
    TP600 Win 2K 288 mb memory
    701C Win 98 Don't ask

    I always avoid Optimus, it's historically been way too buggy and very little performance bump over HD4000/4600.  I either opt for Quadro machines or just run Intel integrated.  That being said, it's a blessing in disguise for you since Outlook is hideos.  Consider something else, so many better options exist.
    W530 | 3840QM | 32g @ 1.35v CL9 1986z | 512g 840 Pro | 1t HGST 7200 | FHD AUO v.4 | Quadro K2k | GOBI 5k | Centrino 6300

  • [Partly solved] Nouveau driver crashes, nvidia-libgl-beta problem etc.

    I had the same issue as in thread 1446984 but disabling USB 3.0 in BIOS did not solve the problem.
    I have a new install, and are getting complete freezes on shutdown, but also on switching to another tty than the graphical (freeze after 1-20 seconds after switching tty). This is reproducible 100% of the time.
    I were also getting errors about nouveau, and thought the tty switching freezes might be related to that.
    This was correct, since installing the nvidia-beta driver solved that problem (but not the shutdown issues).
    As a side note, I also had some minor problems installing nvidia-libgl-beta which is a dependency for nvidia-beta.
    Trying to install it with aura gave the following error:
    $ sudo aura -A nvidia-libgl-beta
    [sudo] password for rix:
    aura >>= The following are not AUR packages:
    nvidia-libgl-beta
    aura >>= No valid packages specified.
    Installing it manually from the tarball in AUR seemed to work, but when I tried to install nvidia-beta it complained about nvidia-libgl-beta missing, and it's not in the output of pacman -Q !
    Trying to reinstall it works as well, and pacman says it is reinstalling with net upgrade size 0.
    I removed nvidia-libgl-beta as a dependency from the nvidia-beta PKGBUILD and installed it, it seems to work at least, no more tty switch crashes.
    Also, after installing there is no nvidia*.pkg.tar.xz files in /var/cache/pacman/pkg/. Maybe these are put somewhere else?
    dmesg (includes nouveau errors but it's the "ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion ..." line I believe is the interesting one):
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1a4daa5b-c2e9-44c0-9155-95a9d2c25878 rw cryptdevice=UUID=67ed3f10-6bc9-4413-b567-f9f0111aecf0:cryptroot resume=/dev/mapper/lvm-swapvol quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba004fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ba005000-0x00000000ba00bfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000ba00c000-0x00000000ba7abfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ba7ac000-0x00000000baa1afff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000baa1b000-0x00000000cb3c9fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cb3ca000-0x00000000cb453fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cb454000-0x00000000cb46efff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cb46f000-0x00000000cb9ddfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cb9de000-0x00000000cbffefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fdfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.8 present.
    [ 0.000000] DMI: Micro-Star International Co., Ltd. GS60 2PE/MS-16H2, BIOS E16H2IMS.106 05/13/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x42fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
    [ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
    [ 0.000000] 2 base 0420000000 mask 7FF0000000 write-back
    [ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
    [ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
    [ 0.000000] 5 base 00CE000000 mask 7FFE000000 uncachable
    [ 0.000000] 6 base 00CD000000 mask 7FFF000000 uncachable
    [ 0.000000] 7 base 042FE00000 mask 7FFFE00000 uncachable
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xcc000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x42fc00000-0x42fdfffff]
    [ 0.000000] [mem 0x42fc00000-0x42fdfffff] page 2M
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x42c000000-0x42fbfffff]
    [ 0.000000] [mem 0x42c000000-0x42fbfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x400000000-0x42bffffff]
    [ 0.000000] [mem 0x400000000-0x42bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xba004fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0xb9ffffff] page 2M
    [ 0.000000] [mem 0xba000000-0xba004fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xba00c000-0xba7abfff]
    [ 0.000000] [mem 0xba00c000-0xba1fffff] page 4k
    [ 0.000000] [mem 0xba200000-0xba5fffff] page 2M
    [ 0.000000] [mem 0xba600000-0xba7abfff] page 4k
    [ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xbaa1b000-0xcb3c9fff]
    [ 0.000000] [mem 0xbaa1b000-0xbabfffff] page 4k
    [ 0.000000] [mem 0xbac00000-0xcb1fffff] page 2M
    [ 0.000000] [mem 0xcb200000-0xcb3c9fff] page 4k
    [ 0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xcbfff000-0xcbffffff]
    [ 0.000000] [mem 0xcbfff000-0xcbffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
    [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x374fa000-0x37a74fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 MSI_NB)
    [ 0.000000] ACPI: XSDT 0x00000000CB459098 0000B4 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000CB466618 00010C (v05 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000CB4591E0 00D433 (v02 MSI_NB MEGABOOK 00000030 INTL 20120711)
    [ 0.000000] ACPI: FACS 0x00000000CB9DC080 000040
    [ 0.000000] ACPI: APIC 0x00000000CB466728 000092 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 0x00000000CB4667C0 000044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: ASF! 0x00000000CB466808 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: MSDM 0x00000000CB4668B0 000055 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: LPIT 0x00000000CB466908 00005C (v01 MSI_NB MEGABOOK 00000000 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000CB466968 000228 (v01 INTEL sensrhub 00000000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000CB466B90 00018F (v01 Intel zpodd 00001000 INTL 20120711)
    [ 0.000000] ACPI: SLIC 0x00000000CB466D20 000176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 0x00000000CB466E98 000575 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000CB467410 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
    [ 0.000000] ACPI: MCFG 0x00000000CB467EE8 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000CB467F28 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000CB467F60 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000CB468278 003550 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 0x00000000CB46B7C8 00143A (v01 SgRef SgPeg 00001000 INTL 20120711)
    [ 0.000000] ACPI: DMAR 0x00000000CB46CC08 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
    [ 0.000000] ACPI: SSDT 0x00000000CB46CCC0 001472 (v01 OptRef OptTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042fdfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x42fdfffff]
    [ 0.000000] NODE_DATA [mem 0x42fdf6000-0x42fdfafff]
    [ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f400000-ffff88042f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x42fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xba004fff]
    [ 0.000000] node 0: [mem 0xba00c000-0xba7abfff]
    [ 0.000000] node 0: [mem 0xbaa1b000-0xcb3c9fff]
    [ 0.000000] node 0: [mem 0xcbfff000-0xcbffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x42fdfffff]
    [ 0.000000] On node 0 totalpages: 4173553
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12934 pages used for memmap
    [ 0.000000] DMA32 zone: 827733 pages, LIFO batch:31
    [ 0.000000] Normal zone: 52216 pages used for memmap
    [ 0.000000] Normal zone: 3341824 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xcd200000-0xcf1fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xba005000-0xba00bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xba7ac000-0xbaa1afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb3ca000-0xcb453fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb454000-0xcb46efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb46f000-0xcb9ddfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb9de000-0xcbffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcc000000-0xccffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88042fa00000 s86784 r8192 d23808 u262144
    [ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4108318
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1a4daa5b-c2e9-44c0-9155-95a9d2c25878 rw cryptdevice=UUID=67ed3f10-6bc9-4413-b567-f9f0111aecf0:cryptroot resume=/dev/mapper/lvm-swapvol quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 16347668K/16694212K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 346544K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 67108864 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2494.320 MHz processor
    [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.50 BogoMIPS (lpj=8314400)
    [ 0.000024] pid_max: default: 32768 minimum: 301
    [ 0.000029] ACPI: Core revision 20140424
    [ 0.009832] ACPI: All ACPI Tables successfully acquired
    [ 0.010517] Security Framework initialized
    [ 0.010521] Yama: becoming mindful.
    [ 0.011207] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.013363] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.014280] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.014292] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.014481] Initializing cgroup subsys memory
    [ 0.014494] Initializing cgroup subsys devices
    [ 0.014498] Initializing cgroup subsys freezer
    [ 0.014500] Initializing cgroup subsys net_cls
    [ 0.014502] Initializing cgroup subsys blkio
    [ 0.014521] CPU: Physical Processor ID: 0
    [ 0.014521] CPU: Processor Core ID: 0
    [ 0.014525] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.015291] mce: CPU supports 9 MCE banks
    [ 0.015301] CPU0: Thermal monitoring enabled (TM1)
    [ 0.015311] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    tlb_flushall_shift: 6
    [ 0.015382] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
    [ 0.015942] ftrace: allocating 20434 entries in 80 pages
    [ 0.022339] dmar: Host address width 39
    [ 0.022341] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.022348] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
    [ 0.022349] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.022352] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
    [ 0.022353] dmar: RMRR base: 0x000000cbe94000 end: 0x000000cbea2fff
    [ 0.022354] dmar: RMRR base: 0x000000cd000000 end: 0x000000cf1fffff
    [ 0.022418] IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
    [ 0.022419] HPET id 0 under DRHD base 0xfed91000
    [ 0.022420] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.022530] Enabled IRQ remapping in x2apic mode
    [ 0.022531] Enabling x2apic
    [ 0.022532] Enabled x2apic
    [ 0.022541] Switched APIC routing to cluster x2apic.
    [ 0.022958] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056020] smpboot: CPU0: Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz (fam: 06, model: 3c, stepping: 03)
    [ 0.056031] TSC deadline timer enabled
    [ 0.056047] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.056060] ... version: 3
    [ 0.056061] ... bit width: 48
    [ 0.056061] ... generic registers: 4
    [ 0.056062] ... value mask: 0000ffffffffffff
    [ 0.056063] ... max period: 0000ffffffffffff
    [ 0.056063] ... fixed-purpose events: 3
    [ 0.056064] ... event mask: 000000070000000f
    [ 0.079493] x86: Booting SMP configuration:
    [ 0.079494] .... node #0, CPUs: #1
    [ 0.093398] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.100083] #2 #3 #4 #5 #6 #7
    [ 0.220438] x86: Booted up 1 node, 8 CPUs
    [ 0.220442] smpboot: Total of 8 processors activated (39925.00 BogoMIPS)
    [ 0.226421] devtmpfs: initialized
    [ 0.228397] PM: Registering ACPI NVS region [mem 0xba005000-0xba00bfff] (28672 bytes)
    [ 0.228398] PM: Registering ACPI NVS region [mem 0xcb46f000-0xcb9ddfff] (5697536 bytes)
    [ 0.228983] pinctrl core: initialized pinctrl subsystem
    [ 0.229021] RTC time: 0:23:19, date: 08/15/14
    [ 0.229056] NET: Registered protocol family 16
    [ 0.229128] cpuidle: using governor ladder
    [ 0.229129] cpuidle: using governor menu
    [ 0.229147] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.229148] ACPI: bus type PCI registered
    [ 0.229150] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.229202] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.229203] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.229261] PCI: Using configuration type 1 for base access
    [ 0.243279] ACPI: Added _OSI(Module Device)
    [ 0.243281] ACPI: Added _OSI(Processor Device)
    [ 0.243282] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.243283] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.245353] ACPI Error: No handler for Region [EC__] (ffff88041f03bc18) [EmbeddedControl] (20140424/evregion-162)
    [ 0.245356] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-299)
    [ 0.245358] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC__._REG] (Node ffff88041f03ecf8), AE_NOT_EXIST (20140424/psparse-536)
    [ 0.246040] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.286406] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.299829] ACPI: Dynamic OEM Table Load:
    [ 0.299835] ACPI: SSDT 0xFFFF880418CB3000 0003EA (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
    [ 0.313292] ACPI: Dynamic OEM Table Load:
    [ 0.313298] ACPI: SSDT 0xFFFF880418D31000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
    [ 0.326537] ACPI: Dynamic OEM Table Load:
    [ 0.326541] ACPI: SSDT 0xFFFF880418D01A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
    [ 0.354461] ACPI: Interpreter enabled
    [ 0.354467] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.354471] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.354482] ACPI: (supports S0 S3 S4 S5)
    [ 0.354483] ACPI: Using IOAPIC for interrupt routing
    [ 0.354500] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.371125] ACPI: Power Resource [PG00] (on)
    [ 0.385654] ACPI: Power Resource [FN00] (off)
    [ 0.385699] ACPI: Power Resource [FN01] (off)
    [ 0.385742] ACPI: Power Resource [FN02] (off)
    [ 0.385786] ACPI: Power Resource [FN03] (off)
    [ 0.385831] ACPI: Power Resource [FN04] (off)
    [ 0.386362] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.386366] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.386519] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
    [ 0.386601] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
    [ 0.386931] PCI host bridge to bus 0000:00
    [ 0.386933] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.386935] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.386936] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.386937] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.386938] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.386939] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.386940] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.386940] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.386941] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.386942] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.386943] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff]
    [ 0.386948] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [ 0.387008] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [ 0.387033] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.387061] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.387093] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [ 0.387101] pci 0000:00:02.0: reg 0x10: [mem 0xf6400000-0xf67fffff 64bit]
    [ 0.387105] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.387108] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.387156] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
    [ 0.387162] pci 0000:00:03.0: reg 0x10: [mem 0xf7414000-0xf7417fff 64bit]
    [ 0.387235] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [ 0.387251] pci 0000:00:14.0: reg 0x10: [mem 0xf7400000-0xf740ffff 64bit]
    [ 0.387303] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.387325] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.387356] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [ 0.387373] pci 0000:00:16.0: reg 0x10: [mem 0xf741e000-0xf741e00f 64bit]
    [ 0.387429] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.387490] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [ 0.387508] pci 0000:00:1a.0: reg 0x10: [mem 0xf741c000-0xf741c3ff]
    [ 0.387586] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.387623] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.387656] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [ 0.387670] pci 0000:00:1b.0: reg 0x10: [mem 0xf7410000-0xf7413fff 64bit]
    [ 0.387730] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.387754] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.387784] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [ 0.387850] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.387876] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.387902] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
    [ 0.387968] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.387994] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.388018] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
    [ 0.388084] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.388110] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.388133] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
    [ 0.388199] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.388225] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.388261] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [ 0.388279] pci 0000:00:1d.0: reg 0x10: [mem 0xf741b000-0xf741b3ff]
    [ 0.388358] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.388395] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.388428] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
    [ 0.388564] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [ 0.388578] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
    [ 0.388584] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
    [ 0.388591] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
    [ 0.388597] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
    [ 0.388618] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 0.388625] pci 0000:00:1f.2: reg 0x24: [mem 0xf741a000-0xf741a7ff]
    [ 0.388658] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.388708] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [ 0.388721] pci 0000:00:1f.3: reg 0x10: [mem 0xf7419000-0xf74190ff 64bit]
    [ 0.388739] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.388833] pci 0000:01:00.0: [10de:1199] type 00 class 0x030200
    [ 0.388840] pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
    [ 0.388847] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.388854] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.388858] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    [ 0.388863] pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref]
    [ 0.388900] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 0.393257] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.393259] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.393261] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff]
    [ 0.393264] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.393341] acpiphp: Slot [1] registered
    [ 0.393351] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.393425] acpiphp: Slot [1-1] registered
    [ 0.393435] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.393439] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
    [ 0.393443] pci 0000:00:1c.2: bridge window [mem 0xf6800000-0xf71fffff]
    [ 0.393448] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
    [ 0.393716] pci 0000:04:00.0: [1969:e091] type 00 class 0x020000
    [ 0.394035] pci 0000:04:00.0: reg 0x10: [mem 0xf7300000-0xf733ffff 64bit]
    [ 0.394138] pci 0000:04:00.0: reg 0x18: [io 0xc000-0xc07f]
    [ 0.395629] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.395860] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.400012] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.400015] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
    [ 0.400019] pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
    [ 0.400137] pci 0000:05:00.0: [8086:08b1] type 00 class 0x028000
    [ 0.400192] pci 0000:05:00.0: reg 0x10: [mem 0xf7200000-0xf7201fff 64bit]
    [ 0.400431] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
    [ 0.400485] pci 0000:05:00.0: System wakeup disabled by ACPI
    [ 0.406642] pci 0000:00:1c.4: PCI bridge to [bus 05]
    [ 0.406647] pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
    [ 0.406725] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.414012] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.414043] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.414073] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.414102] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.414131] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.414160] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.414189] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.414217] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 0.414398] ACPI: Enabled 6 GPEs in block 00 to 3F
    [ 0.414425] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.414488] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.414490] vgaarb: loaded
    [ 0.414491] vgaarb: bridge control possible 0000:00:02.0
    [ 0.414510] PCI: Using ACPI for IRQ routing
    [ 0.415717] PCI: pci_cache_line_size set to 64 bytes
    [ 0.415760] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.415762] e820: reserve RAM buffer [mem 0xba005000-0xbbffffff]
    [ 0.415763] e820: reserve RAM buffer [mem 0xba7ac000-0xbbffffff]
    [ 0.415764] e820: reserve RAM buffer [mem 0xcb3ca000-0xcbffffff]
    [ 0.415765] e820: reserve RAM buffer [mem 0x42fe00000-0x42fffffff]
    [ 0.415845] NetLabel: Initializing
    [ 0.415846] NetLabel: domain hash size = 128
    [ 0.415847] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.415856] NetLabel: unlabeled traffic allowed by default
    [ 0.415875] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.415879] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.417907] Switched to clocksource hpet
    [ 0.421100] pnp: PnP ACPI init
    [ 0.421109] ACPI: bus type PNP registered
    [ 0.421154] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.421156] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.421271] system 00:01: [io 0x0680-0x069f] has been reserved
    [ 0.421272] system 00:01: [io 0xffff] has been reserved
    [ 0.421274] system 00:01: [io 0xffff] has been reserved
    [ 0.421275] system 00:01: [io 0xffff] has been reserved
    [ 0.421276] system 00:01: [io 0x1c00-0x1cfe] has been reserved
    [ 0.421278] system 00:01: [io 0x1d00-0x1dfe] has been reserved
    [ 0.421279] system 00:01: [io 0x1e00-0x1efe] has been reserved
    [ 0.421280] system 00:01: [io 0x1f00-0x1ffe] has been reserved
    [ 0.421281] system 00:01: [io 0x1800-0x18fe] could not be reserved
    [ 0.421283] system 00:01: [io 0x164e-0x164f] has been reserved
    [ 0.421284] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.421306] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.421336] system 00:03: [io 0x1854-0x1857] has been reserved
    [ 0.421337] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.421368] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.421370] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.421401] pnp 00:05: Plug and Play ACPI device, IDs ETD0301 PNP0f13 SYN1500 SYN0002 (active)
    [ 0.421425] pnp 00:06: Plug and Play ACPI device, IDs MSI0007 PNP030b (active)
    [ 0.428497] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.428499] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.428500] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.428501] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.428502] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.428503] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.428504] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 0.428505] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.428507] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.428508] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.428509] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
    [ 0.428510] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
    [ 0.428512] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.428661] pnp: PnP ACPI: found 8 devices
    [ 0.428662] ACPI: bus type PNP unregistered
    [ 0.434525] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.434527] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.434529] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    [ 0.434547] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.434548] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.434549] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.434553] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
    [ 0.434557] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
    [ 0.434559] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.434560] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.434562] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.434564] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff]
    [ 0.434566] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.434568] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.434571] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.434574] pci 0000:00:1c.0: bridge window [mem 0xcf200000-0xcf3fffff]
    [ 0.434578] pci 0000:00:1c.0: bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
    [ 0.434583] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.434585] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
    [ 0.434594] pci 0000:00:1c.2: bridge window [mem 0xf6800000-0xf71fffff]
    [ 0.434597] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
    [ 0.434602] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.434604] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
    [ 0.434608] pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
    [ 0.434614] pci 0000:00:1c.4: PCI bridge to [bus 05]
    [ 0.434619] pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
    [ 0.434625] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.434627] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.434628] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.434628] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.434629] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.434630] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.434631] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.434632] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.434633] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.434634] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff]
    [ 0.434635] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.434636] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff]
    [ 0.434637] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.434638] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.434639] pci_bus 0000:02: resource 1 [mem 0xcf200000-0xcf3fffff]
    [ 0.434640] pci_bus 0000:02: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref]
    [ 0.434641] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.434642] pci_bus 0000:03: resource 1 [mem 0xf6800000-0xf71fffff]
    [ 0.434643] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf2afffff 64bit pref]
    [ 0.434644] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
    [ 0.434645] pci_bus 0000:04: resource 1 [mem 0xf7300000-0xf73fffff]
    [ 0.434646] pci_bus 0000:05: resource 1 [mem 0xf7200000-0xf72fffff]
    [ 0.434665] NET: Registered protocol family 2
    [ 0.434817] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.434957] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.435058] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.435070] TCP: reno registered
    [ 0.435083] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.435119] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.435175] NET: Registered protocol family 1
    [ 0.435185] pci 0000:00:02.0: Boot video device
    [ 0.468054] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
    [ 0.468062] PCI: CLS 64 bytes, default 64
    [ 0.468102] Unpacking initramfs...
    [ 0.532072] Freeing initrd memory: 5612K (ffff8800374fa000 - ffff880037a75000)
    [ 0.532091] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.532093] software IO TLB [mem 0xc73ca000-0xcb3ca000] (64MB) mapped at [ffff8800c73ca000-ffff8800cb3c9fff]
    [ 0.532304] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 0.532341] Scanning for low memory corruption every 60 seconds
    [ 0.532551] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.532785] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.533736] zbud: loaded
    [ 0.533873] VFS: Disk quotas dquot_6.5.2
    [ 0.533900] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.533989] msgmni has been set to 31940
    [ 0.534033] Key type big_key registered
    [ 0.534168] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.534218] io scheduler noop registered
    [ 0.534220] io scheduler deadline registered
    [ 0.534251] io scheduler cfq registered (default)
    [ 0.534366] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
    [ 0.534677] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.534686] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.534714] vesafb: mode is 2880x1620x32, linelength=11520, pages=0
    [ 0.534715] vesafb: scrolling: redraw
    [ 0.534716] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.534738] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90005c00000, using 18240k, total 18240k
    [ 0.822629] Console: switching to colour frame buffer device 360x101
    [ 1.110079] fb0: VESA VGA frame buffer device
    [ 1.110094] intel_idle: MWAIT substates: 0x42120
    [ 1.110095] intel_idle: v0.4 model 0x3C
    [ 1.110096] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 1.110313] GHES: HEST is not enabled!
    [ 1.110361] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.110652] Linux agpgart interface v0.103
    [ 1.110693] rtc_cmos 00:02: RTC can wake from S4
    [ 1.110794] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 1.110819] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.110828] Intel P-state driver initializing.
    [ 1.110838] Intel pstate controlling: cpu 0
    [ 1.110854] Intel pstate controlling: cpu 1
    [ 1.110867] Intel pstate controlling: cpu 2
    [ 1.110879] Intel pstate controlling: cpu 3
    [ 1.110891] Intel pstate controlling: cpu 4
    [ 1.110899] Intel pstate controlling: cpu 5
    [ 1.110911] Intel pstate controlling: cpu 6
    [ 1.110923] Intel pstate controlling: cpu 7
    [ 1.111000] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.111276] TCP: cubic registered
    [ 1.111504] NET: Registered protocol family 10
    [ 1.111971] NET: Registered protocol family 17
    [ 1.112783] registered taskstats version 1
    [ 1.114136] Magic number: 10:956:354
    [ 1.114303] rtc_cmos 00:02: setting system clock to 2014-08-15 00:23:19 UTC (1408062199)
    [ 1.114490] PM: Checking hibernation image partition /dev/mapper/lvm-swapvol
    [ 1.114497] PM: Hibernation image not present or could not be loaded.
    [ 1.116376] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
    [ 1.116380] Write protecting the kernel read-only data: 8192k
    [ 1.121213] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
    [ 1.123178] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
    [ 1.135874] random: systemd-tmpfile urandom read with 4 bits of entropy available
    [ 1.136933] systemd-udevd[80]: starting version 215
    [ 1.139538] device-mapper: uevent: version 1.0.3
    [ 1.139594] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
    [ 1.149753] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.156378] ACPI: bus type USB registered
    [ 1.156404] usbcore: registered new interface driver usbfs
    [ 1.156415] usbcore: registered new interface driver hub
    [ 1.156476] usbcore: registered new device driver usb
    [ 1.156933] SCSI subsystem initialized
    [ 1.162079] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.162996] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.163041] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.163214] ehci-pci: EHCI PCI platform driver
    [ 1.163316] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 1.163320] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.163332] ehci-pci 0000:00:1a.0: debug port 2
    [ 1.164275] libata version 3.00 loaded.
    [ 1.164967] AVX2 version of gcm_enc/dec engaged.
    [ 1.167248] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.167266] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf741c000
    [ 1.175425] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.175578] hub 1-0:1.0: USB hub found
    [ 1.175582] hub 1-0:1.0: 2 ports detected
    [ 1.175779] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 1.175783] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.175793] ehci-pci 0000:00:1d.0: debug port 2
    [ 1.179710] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.179723] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf741b000
    [ 1.179857] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.188804] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.188987] hub 2-0:1.0: USB hub found
    [ 1.188991] hub 2-0:1.0: 2 ports detected
    [ 1.189214] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.189222] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 1.189323] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.189343] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
    [ 1.189561] hub 3-0:1.0: USB hub found
    [ 1.189580] hub 3-0:1.0: 14 ports detected
    [ 1.192223] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.192226] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 1.192336] hub 4-0:1.0: USB hub found
    [ 1.192347] hub 4-0:1.0: 6 ports detected
    [ 1.193001] usb: failed to peer usb4-port6 and usb3-port4 by location (usb4-port6:none) (usb3-port4:usb4-port4)
    [ 1.193002] usb usb4-port6: failed to peer to usb3-port4 (-16)
    [ 1.193002] usb: port power management may be unreliable
    [ 1.193071] ahci 0000:00:1f.2: version 3.0
    [ 1.193201] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.193239] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x10 impl SATA mode
    [ 1.193241] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 1.193733] scsi0 : ahci
    [ 1.193850] scsi1 : ahci
    [ 1.193946] scsi2 : ahci
    [ 1.194041] scsi3 : ahci
    [ 1.194109] scsi4 : ahci
    [ 1.194177] scsi5 : ahci
    [ 1.194201] ata1: DUMMY
    [ 1.194201] ata2: DUMMY
    [ 1.194202] ata3: DUMMY
    [ 1.194203] ata4: DUMMY
    [ 1.194205] ata5: SATA max UDMA/133 abar m2048@0xf741a000 port 0xf741a300 irq 44
    [ 1.194206] ata6: DUMMY
    [ 1.482494] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 1.512521] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.513764] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
    [ 1.513768] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 1.513770] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.514950] ata5.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
    [ 1.514953] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.516323] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
    [ 1.516327] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 1.516329] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.517496] ata5.00: configured for UDMA/133
    [ 1.517668] scsi 4:0:0:0: Direct-Access ATA HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
    [ 1.520380] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.520382] sd 4:0:0:0: [sda] 4096-byte physical blocks
    [ 1.520463] sd 4:0:0:0: [sda] Write Protect is off
    [ 1.520466] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.520499] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.535828] tsc: Refined TSC clocksource calibration: 2494.224 MHz
    [ 1.594508] sda: sda1 sda2 sda3 sda128
    [ 1.595313] sd 4:0:0:0: [sda] Attached SCSI disk
    [ 1.606608] hub 1-1:1.0: USB hub found
    [ 1.606671] hub 1-1:1.0: 6 ports detected
    [ 1.712720] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.836976] hub 2-1:1.0: USB hub found
    [ 1.837108] hub 2-1:1.0: 8 ports detected
    [ 1.996416] usb 3-5: new low-speed USB device number 2 using xhci_hcd
    [ 2.173583] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.175034] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.176842] usbcore: registered new interface driver usbhid
    [ 2.176844] usbhid: USB HID core driver
    [ 2.177298] input: Mouse USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:FFC0:0040.0001/input/input2
    [ 2.177340] hid-generic 0003:FFC0:0040.0001: input,hidraw0: USB HID v1.11 Mouse [Mouse USB Laser Mouse] on usb-0000:00:14.0-5/input0
    [ 2.239993] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
    [ 2.403591] usb 2-1.8: new full-speed USB device number 3 using ehci-pci
    [ 2.491845] hid-generic 0003:1770:FF00.0002: hiddev0,hidraw1: USB HID v1.10 Device [MSI EPF USB MSI EPF USB] on usb-0000:00:1d.0-1.8/input0
    [ 2.537099] Switched to clocksource tsc
    [ 9.125249] random: nonblocking pool is initialized
    [ 15.501907] NET: Registered protocol family 38
    [ 17.087530] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 18.229927] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
    [ 18.534354] systemd-udevd[279]: starting version 215
    [ 18.952256] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0D:00/input/input3
    [ 18.952469] ACPI: Fan [FAN0] (off)
    [ 18.952491] ACPI: Fan [FAN1] (off)
    [ 18.952509] ACPI: Fan [FAN2] (off)
    [ 18.952526] ACPI: Fan [FAN3] (off)
    [ 18.952543] ACPI: Fan [FAN4] (off)
    [ 18.955614] ACPI: Lid Switch [LID0]
    [ 18.955655] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 18.955658] ACPI: Power Button [PWRB]
    [ 18.955686] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 18.955687] ACPI: Power Button [PWRF]
    [ 18.966606] wmi: Mapper loaded
    [ 19.047576] thermal LNXTHERM:00: registered as thermal_zone0
    [ 19.047578] ACPI: Thermal Zone [TZ00] (28 C)
    [ 19.047729] thermal LNXTHERM:01: registered as thermal_zone1
    [ 19.047730] ACPI: Thermal Zone [TZ01] (30 C)
    [ 19.050742] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 19.068816] thermal LNXTHERM:02: registered as thermal_zone2
    [ 19.068818] ACPI: Thermal Zone [THRM] (53 C)
    [ 19.071927] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
    [ 19.071931] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 19.124018] [drm] Initialized drm 1.1.0 20060810
    [ 19.155967] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 19.191918] ACPI: Battery Slot [BAT1] (battery present)
    [ 19.198641] ACPI: AC Adapter [ADP1] (on-line)
    [ 19.201166] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
    [ 19.230883] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.320790] mousedev: PS/2 mouse device common for all mice
    [ 19.340987] input: MSI WMI hotkeys as /devices/virtual/input/input8
    [ 19.350216] iTCO_vendor_support: vendor-support=0
    [ 19.357069] [drm] Memory usable by graphics device = 2048M
    [ 19.357071] [drm] Replacing VGA console driver
    [ 19.357073] checking generic (d0000000 11d0000) vs hw (d0000000 10000000)
    [ 19.357074] fb: switching to inteldrmfb from VESA VGA
    [ 19.357086] Console: switching to colour dummy device 80x25
    [ 19.360084] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 19.360106] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
    [ 19.360171] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 19.375453] i915 0000:00:02.0: irq 46 for MSI/MSI-X
    [ 19.375461] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 19.375462] [drm] Driver supports precise vblank timestamp query.
    [ 19.375480] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 19.396788] [drm] VBT doesn't support DRRS
    [ 19.413293] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [44:8a:5b:6f:c3:57]
    [ 19.434956] cfg80211: Calling CRDA to update world regulatory domain
    [ 19.465506] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465534] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465555] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465575] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465588] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465603] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465625] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465673] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 19.518669] Bluetooth: Core ver 2.19
    [ 19.518681] NET: Registered protocol family 31
    [ 19.518682] Bluetooth: HCI device and connection manager initialized
    [ 19.518688] Bluetooth: HCI socket layer initialized
    [ 19.518689] Bluetooth: L2CAP socket layer initialized
    [ 19.545919] Bluetooth: SCO socket layer initialized
    [ 19.545920] systemd-udevd[296]: renamed network interface eth0 to enp4s0
    [ 19.555627] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
    [ 19.579086] fbcon: inteldrmfb (fb0) is primary device
    [ 19.634446] usbcore: registered new interface driver btusb
    [ 19.647874] Bluetooth: hci0: read Intel version: 370710018002030d00
    [ 19.662947] MXM: GUID detected in BIOS
    [ 19.663037] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 19.663093] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 19.663229] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
    [ 19.663230] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
    [ 19.672404] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 19.672404] Copyright(c) 2003- 2014 Intel Corporation
    [ 19.672511] iwlwifi 0000:05:00.0: irq 47 for MSI/MSI-X
    [ 19.774284] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
    [ 19.803544] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f00)
    [ 19.804987] iwlwifi 0000:05:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
    [ 19.820975] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0e.
    [ 19.908919] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
    [ 19.956219] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
    [ 20.011971] iwlwifi 0000:05:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
    [ 20.012015] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
    [ 20.012231] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
    [ 20.155135] Adding 16777212k swap on /dev/mapper/lvm-swapvol. Priority:-1 extents:1 across:16777212k FS
    [ 20.301346] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    [ 20.329844] systemd-udevd[285]: renamed network interface wlan0 to wlp5s0
    [ 20.646833] Console: switching to colour frame buffer device 360x101
    [ 20.661807] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 20.661808] i915 0000:00:02.0: registered panic notifier
    [ 20.684762] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
    [ 20.707714] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
    [ 20.707767] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:44/LNXVIDEO:00/input/input9
    [ 20.708831] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 20.708889] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
    [ 20.708952] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 20.709072] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e4190a2
    [ 20.709074] nouveau [ DEVICE][0000:01:00.0] Chipset: GK104 (NVE4)
    [ 20.709075] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
    [ 20.709094] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
    [ 20.709100] nouveau [ VBIOS][0000:01:00.0] ... signature not found
    [ 20.709101] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
    [ 20.709410] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
    [ 20.709527] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
    [ 20.778578] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
    [ 20.778580] nouveau [ VBIOS][0000:01:00.0] using image from PROM
    [ 20.778686] nouveau [ VBIOS][0000:01:00.0] BIT signature found
    [ 20.778688] nouveau [ VBIOS][0000:01:00.0] version 80.04.ef.00.21
    [ 20.778987] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
    [ 20.778994] nouveau [ VBIOS][0000:01:00.0] running init tables
    [ 20.968712] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
    [ 20.968772] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
    [ 20.968830] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
    [ 21.009002] sound hdaudioC1D0: autoconfig: line_outs=2 (0x15/0x1b/0x0/0x0/0x0) type:speaker
    [ 21.009005] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 21.009006] sound hdaudioC1D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
    [ 21.009007] sound hdaudioC1D0: mono: mono_out=0x0
    [ 21.009008] sound hdaudioC1D0: dig-out=0x1e/0x0
    [ 21.009009] sound hdaudioC1D0: inputs:
    [ 21.009010] sound hdaudioC1D0: Mic=0x18
    [ 21.009011] sound hdaudioC1D0: Internal Mic=0x12
    [ 21.016614] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input14
    [ 21.016783] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
    [ 21.016842] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
    [ 21.043492] nouveau 0000:01:00.0: irq 50 for MSI/MSI-X
    [ 21.043506] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
    [ 21.043546] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
    [ 21.043547] nouveau [ PFB][0000:01:00.0] RAM size: 3072 MiB
    [ 21.043548] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
    [ 21.045953] nouveau [ VOLT][0000:01:00.0] GPU voltage: 600000uv
    [ 21.074609] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
    [ 21.074615] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
    [ 21.074622] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
    [ 21.074643] nouveau [ CLK][0000:01:00.0] 07: core 324-405 MHz memory 648 MHz
    [ 21.074686] nouveau [ CLK][0000:01:00.0] 0a: core 405-967 MHz memory 1620 MHz
    [ 21.074757] nouveau [ CLK][0000:01:00.0] 0e: core 405-967 MHz memory 4000 MHz
    [ 21.074843] nouveau [ CLK][0000:01:00.0] 0f: core 405-967 MHz memory 5000 MHz
    [ 21.074913] nouveau [ CLK][0000:01:00.0] --: core 324 MHz memory 648 MHz
    [ 21.113338] nouveau E[ PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x400700 [ IBUS ]
    [ 21.113368] vga_switcheroo: enabled
    [ 21.113471] [TTM] Zone kernel: Available graphics memory: 8177794 kiB
    [ 21.113473] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 21.113473] [TTM] Initializing pool allocator
    [ 21.113477] [TTM] Initializing DMA pool allocator
    [ 21.113484] nouveau [ DRM] VRAM: 3072 MiB
    [ 21.113485] nouveau [ DRM] GART: 1048576 MiB
    [ 21.113487] nouveau [ DRM] TMDS table version 2.0
    [ 21.113489] nouveau [ DRM] DCB version 4.0
    [ 21.119681] nouveau [ DRM] MM: using COPY for buffer copies
    [ 21.119686] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 1
    [ 21.347781] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 21.985072] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 21.993709] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 26.353187] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 26.353470] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
    [ 26.353475] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 28.489788] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 28.566055] systemd-journald[255]: Received request to flush runtime journal from PID 1
    [ 28.853911] systemd-journald[255]: File /var/log/journal/2083dda0e63b4e6cad96cc755ad72173/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 30.756848] alx 0000:04:00.0: irq 51 for MSI/MSI-X
    [ 30.757162] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
    [ 30.759420] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
    [ 30.759647] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
    [ 30.771168] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
    [ 30.780781] nouveau E[ PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x400700 [ IBUS ]
    [ 33.277389] nouveau E[ PGRAPH][0000:01:00.0] HUB_INIT timed out
    [ 33.277393] nouveau E[ PGRAPH][0000:01:00.0] 409000 - done 0x00000220
    [ 33.277397] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
    [ 33.277401] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000006 0x00000001
    [ 33.277403] nouveau E[ PGRAPH][0000:01:00.0] 502000 - done 0x00000340
    [ 33.277408] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x80000000 0x00006500 0x00000000 0x00000000
    [ 33.277414] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000002 0x00000000
    [ 33.277415] nouveau E[ PGRAPH][0000:01:00.0] 50a000 - done 0x00000340
    [ 33.277421] nouveau E[ PGRAPH][0000:01:00.0] 50a000 - stat 0x80000000 0x00008e00 0x00000000 0x00000000
    [ 33.277426] nouveau E[ PGRAPH][0000:01:00.0] 50a000 - stat 0x00000000 0x00000000 0x00000002 0x00000000
    [ 33.277428] nouveau E[ PGRAPH][0000:01:00.0] 512000 - done 0x00000300
    [ 33.277433] nouveau E[ PGRAPH][0000:01:00.0] 512000 - stat 0x00000000 0x00017f00 0x00000000 0x00000000
    [ 33.277439] nouveau E[ PGRAPH][0000:01:00.0] 512000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
    [ 33.277441] nouveau E[ PGRAPH][0000:01:00.0] 51a000 - done 0x00000300
    [ 33.277446] nouveau E[ PGRAPH][0000:01:00.0] 51a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
    [ 33.277451] nouveau E[ PGRAPH][0000:01:00.0] 51a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
    [ 33.277452] nouveau E[ PGRAPH][0000:01:00.0] init failed, -16
    [ 34.226370] cfg80211: Calling CRDA to update world regulatory domain
    [ 36.247358] fuse init (API version 7.23)
    [ 39.340754] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 39.341033] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
    [ 39.341037] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 53.952829] systemd-journald[255]: File /var/log/journal/2083dda0e63b4e6cad96cc755ad72173/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 54.363832] nouveau E[ DRM] failed to idle channel 0xcccc0000 [DRM]
    [ 54.477547] pci_pm_runtime_suspend(): nouveau_pmops_runtime_suspend+0x0/0xe0 [nouveau] returns -16
    [ 60.362546] wlp5s0: authenticate with 94:44:52:dc:db:bf
    [ 60.365767] wlp5s0: send auth to 94:44:52:dc:db:bf (try 1/3)
    [ 60.367581] wlp5s0: authenticated
    [ 60.370498] wlp5s0: associate with 94:44:52:dc:db:bf (try 1/3)
    [ 60.374426] wlp5s0: RX AssocResp from 94:44:52:dc:db:bf (capab=0x411 status=0 aid=3)
    [ 60.375328] wlp5s0: associated
    [ 60.375354] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
    journalctl -x:
    -- Logs begin at Thu 2014-08-14 21:31:47 CEST, end at Fri 2014-08-15 02:25:40 CEST. --
    Aug 14 21:31:47 riXmsi systemd[579]: Starting Paths.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Aug 14 21:31:47 riXmsi systemd[579]: Reached target Paths.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Aug 14 21:31:47 riXmsi systemd[579]: Starting Timers.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Aug 14 21:31:47 riXmsi systemd[579]: Reached target Timers.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Aug 14 21:31:47 riXmsi systemd[579]: Starting Sockets.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Aug 14 21:31:47 riXmsi systemd[579]: Reached target Sockets.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Aug 14 21:31:47 riXmsi systemd[579]: Starting Basic System.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Aug 14 21:31:47 riXmsi systemd[579]: Reached target Basic System.
    -- Subject: Unit UNIT

    keyboard and mouse are now auto-detected. Do you have xf86-input-evdev installed? If so, you do not need to explicitly set the drivers for keyboard and mouse in xorg.conf. You can try it out if you like.

  • Problem with Nvidia Optimus

    Hello,
    I have a laptop with the Nvidia Optimus technology. I followed the wiki, and now I get a blank screen.
    This is the guide that I followed: https://wiki.archlinux.org/index.php/NV … ing_nvidia
    This is my /var/log/Xorg.0.log file:
    [ 341.985]
    X.Org X Server 1.16.3
    Release Date: 2014-12-20
    [ 341.987] X Protocol Version 11, Revision 0
    [ 341.988] Build Operating System: Linux 3.18.1-1-ARCH x86_64
    [ 341.988] Current Operating System: Linux egidio-arch 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
    [ 341.988] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3f7faf8f-4039-466e-b99d-34fa1c61b40f rw quiet
    [ 341.990] Build Date: 29 December 2014 01:09:58PM
    [ 341.990]
    [ 341.991] Current version of pixman: 0.32.6
    [ 341.992] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 341.992] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 341.995] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 3 02:59:24 2015
    [ 341.995] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 341.996] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 341.996] (==) ServerLayout "layout"
    [ 341.996] (**) |-->Screen "nvidia" (0)
    [ 341.996] (**) | |-->Monitor "<default monitor>"
    [ 341.996] (**) | |-->Device "nvidia"
    [ 341.996] (==) No monitor specified for screen "nvidia".
    Using a default monitor configuration.
    [ 341.996] (**) |-->Inactive Device "intel"
    [ 341.996] (==) Automatically adding devices
    [ 341.996] (==) Automatically enabling devices
    [ 341.996] (==) Automatically adding GPU devices
    [ 342.039] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 342.039] Entry deleted from font path.
    [ 342.068] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 342.068] Entry deleted from font path.
    [ 342.068] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 342.068] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 342.068] Entry deleted from font path.
    [ 342.068] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 342.068] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 342.068] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 342.068] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 342.079] (II) Loader magic: 0x818d80
    [ 342.079] (II) Module ABI versions:
    [ 342.079] X.Org ANSI C Emulation: 0.4
    [ 342.079] X.Org Video Driver: 18.0
    [ 342.079] X.Org XInput driver : 21.0
    [ 342.079] X.Org Server Extension : 8.0
    [ 342.081] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [ 342.081] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 342.081] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 8 paused 0
    [ 342.081] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 342.082] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
    [ 342.083] (--) PCI:*(0:0:2:0) 8086:0416:1043:129d rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 342.083] (--) PCI: (0:1:0:0) 10de:0fe4:1043:129d rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 342.083] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 342.083] (II) LoadModule: "glx"
    [ 342.123] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 342.678] (II) Module glx: vendor="NVIDIA Corporation"
    [ 342.678] compiled for 4.0.2, module version = 1.0.0
    [ 342.678] Module class: X.Org Server Extension
    [ 342.685] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
    [ 342.689] (II) LoadModule: "nvidia"
    [ 342.745] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 342.835] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 342.835] compiled for 4.0.2, module version = 1.0.0
    [ 342.835] Module class: X.Org Video Driver
    [ 342.846] (II) LoadModule: "modesetting"
    [ 342.846] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 342.847] (II) Module modesetting: vendor="X.Org Foundation"
    [ 342.847] compiled for 1.16.0, module version = 0.9.0
    [ 342.847] Module class: X.Org Video Driver
    [ 342.847] ABI class: X.Org Video Driver, version 18.0
    [ 342.847] (II) NVIDIA dlloader X Driver 343.36 Mon Dec 1 15:28:39 PST 2014
    [ 342.847] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 342.847] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 342.847] (++) using VT number 2
    [ 342.847] (--) controlling tty is VT number 2, auto-enabling KeepTty
    [ 342.855] (II) Loading sub module "fb"
    [ 342.855] (II) LoadModule: "fb"
    [ 342.855] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 342.872] (II) Module fb: vendor="X.Org Foundation"
    [ 342.872] compiled for 1.16.3, module version = 1.0.0
    [ 342.872] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 342.872] (II) Loading sub module "wfb"
    [ 342.872] (II) LoadModule: "wfb"
    [ 342.872] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 342.891] (II) Module wfb: vendor="X.Org Foundation"
    [ 342.891] compiled for 1.16.3, module version = 1.0.0
    [ 342.891] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 342.891] (II) Loading sub module "ramdac"
    [ 342.891] (II) LoadModule: "ramdac"
    [ 342.891] (II) Module "ramdac" already built-in
    [ 342.905] (II) modesetting(1): using drv /dev/dri/card0
    [ 342.905] (II) modesetting(G0): using drv /dev/dri/card0
    [ 342.905] (EE) Screen 1 deleted because of no matching config section.
    [ 342.905] (II) UnloadModule: "modesetting"
    [ 342.905] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "nvidia" for depth/fbbpp 24/32
    [ 342.905] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 342.905] (==) NVIDIA(0): RGB weight 888
    [ 342.905] (==) NVIDIA(0): Default visual is TrueColor
    [ 342.905] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 342.905] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
    [ 342.907] (**) NVIDIA(0): Enabling 2D acceleration
    [ 347.122] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 347.122] (EE) NVIDIA(GPU-0): check your system's kernel log for additional error
    [ 347.122] (EE) NVIDIA(GPU-0): messages and refer to Chapter 8: Common Problems in the
    [ 347.122] (EE) NVIDIA(GPU-0): README for additional information.
    [ 347.122] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
    [ 347.122] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 347.122] (II) UnloadModule: "nvidia"
    [ 347.122] (II) UnloadSubModule: "wfb"
    [ 347.122] (II) UnloadSubModule: "fb"
    [ 347.122] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
    [ 347.122] (==) modesetting(G0): RGB weight 888
    [ 347.122] (==) modesetting(G0): Default visual is TrueColor
    [ 347.122] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
    [ 347.124] (II) modesetting(G0): Output eDP-1-0 has no monitor section
    [ 347.149] (II) modesetting(G0): Output VGA-1-0 has no monitor section
    [ 347.150] (II) modesetting(G0): Output DisplayPort-1-0 has no monitor section
    [ 347.150] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
    [ 347.150] (II) modesetting(G0): Output HDMI-1-1 has no monitor section
    [ 347.152] (II) modesetting(G0): EDID for output eDP-1-0
    [ 347.152] (II) modesetting(G0): Manufacturer: CMO Model: 1720 Serial#: 0
    [ 347.152] (II) modesetting(G0): Year: 2011 Week: 2
    [ 347.152] (II) modesetting(G0): EDID Version: 1.4
    [ 347.152] (II) modesetting(G0): Digital Display Input
    [ 347.152] (II) modesetting(G0): 6 bits per channel
    [ 347.152] (II) modesetting(G0): Digital interface is undefined
    [ 347.152] (II) modesetting(G0): Max Image Size [cm]: horiz.: 38 vert.: 21
    [ 347.152] (II) modesetting(G0): Gamma: 2.20
    [ 347.152] (II) modesetting(G0): No DPMS capabilities specified
    [ 347.152] (II) modesetting(G0): Supported color encodings: RGB 4:4:4
    [ 347.152] (II) modesetting(G0): First detailed timing is preferred mode
    [ 347.152] (II) modesetting(G0): Preferred mode is native pixel format and refresh rate
    [ 347.152] (II) modesetting(G0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.610
    [ 347.152] (II) modesetting(G0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 347.152] (II) modesetting(G0): Manufacturer's mask: 0
    [ 347.152] (II) modesetting(G0): Supported detailed timing:
    [ 347.152] (II) modesetting(G0): clock: 140.5 MHz Image Size: 382 x 215 mm
    [ 347.152] (II) modesetting(G0): h_active: 1920 h_sync: 1972 h_sync_end 2007 h_blank_end 2094 h_border: 0
    [ 347.152] (II) modesetting(G0): v_active: 1080 v_sync: 1083 v_sync_end 1089 v_blanking: 1118 v_border: 0
    [ 347.152] (II) modesetting(G0): Supported detailed timing:
    [ 347.152] (II) modesetting(G0): clock: 92.5 MHz Image Size: 382 x 215 mm
    [ 347.152] (II) modesetting(G0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    [ 347.152] (II) modesetting(G0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    [ 347.152] (II) modesetting(G0): HC9GK173HGE
    [ 347.152] (II) modesetting(G0): Unknown vendor-specific block 0
    [ 347.152] (II) modesetting(G0): EDID (in hex):
    [ 347.152] (II) modesetting(G0): 00ffffffffffff000daf201700000000
    [ 347.152] (II) modesetting(G0): 021501049026157802ed95a3544c9c26
    [ 347.152] (II) modesetting(G0): 0f505400000001010101010101010101
    [ 347.152] (II) modesetting(G0): 010101010101e13680ae703826403423
    [ 347.152] (II) modesetting(G0): 36007ed71000001a1d2480a070381f40
    [ 347.152] (II) modesetting(G0): 302035007ed71000001a000000fe0048
    [ 347.152] (II) modesetting(G0): 4339474b803137334847450a00000000
    [ 347.152] (II) modesetting(G0): 000041319e0000000002010a202000f3
    [ 347.152] (II) modesetting(G0): Printing probed modes for output eDP-1-0
    [ 347.152] (II) modesetting(G0): Modeline "1920x1080"x60.0 140.49 1920 1972 2007 2094 1080 1083 1089 1118 +hsync -vsync (67.1 kHz eP)
    [ 347.152] (II) modesetting(G0): Modeline "1920x1080"x40.0 92.45 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (44.4 kHz e)
    [ 347.152] (II) modesetting(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
    [ 347.176] (II) modesetting(G0): EDID for output VGA-1-0
    [ 347.176] (II) modesetting(G0): EDID for output DisplayPort-1-0
    [ 347.176] (II) modesetting(G0): EDID for output HDMI-1-0
    [ 347.177] (II) modesetting(G0): EDID for output HDMI-1-1
    [ 347.177] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 347.177] (==) modesetting(G0): DPI set to (96, 96)
    [ 347.177] (II) Loading sub module "fb"
    [ 347.177] (II) LoadModule: "fb"
    [ 347.177] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 347.177] (II) Module fb: vendor="X.Org Foundation"
    [ 347.177] compiled for 1.16.3, module version = 1.0.0
    [ 347.177] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 347.177] (II) Loading sub module "shadow"
    [ 347.177] (II) LoadModule: "shadow"
    [ 347.177] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 347.183] (II) Module shadow: vendor="X.Org Foundation"
    [ 347.183] compiled for 1.16.3, module version = 1.1.0
    [ 347.183] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 347.183] (EE) Screen(s) found, but none have a usable configuration.
    [ 347.183] (EE)
    Fatal server error:
    [ 347.183] (EE) no screens found(EE)
    [ 347.183] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 347.183] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 347.183] (EE)
    [ 347.189] (EE) Server terminated with error (1). Closing log file.
    I'm using Gnome.
    Can you please help me?
    Last edited by Aegidius (2015-01-03 10:17:22)

    Here it is, but you will get to my same conclusion.
    [egidio@egidio-arch ~]$ lspci -v
    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, fast devsel, latency 0
    Capabilities: <access denied>
    Kernel modules: ie31200_edac
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0, IRQ 26
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000e000-0000efff
    Memory behind bridge: f6000000-f70fffff
    Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller])
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, fast devsel, latency 0, IRQ 36
    Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
    Memory at d0000000 (64-bit, prefetchable) [size=256M]
    I/O ports at f000 [size=64]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: <access denied>
    Kernel driver in use: i915
    Kernel modules: i915
    00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
    Subsystem: Intel Corporation Device 2010
    Flags: bus master, fast devsel, latency 0, IRQ 38
    Memory at f7b14000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04) (prog-if 30 [XHCI])
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, medium devsel, latency 0, IRQ 32
    Memory at f7b00000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: xhci_hcd
    Kernel modules: xhci_hcd
    00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, fast devsel, latency 0, IRQ 34
    Memory at f7b1e000 (64-bit, non-prefetchable) [size=16]
    Capabilities: <access denied>
    Kernel driver in use: mei_me
    Kernel modules: mei_me
    00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04) (prog-if 20 [EHCI])
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, medium devsel, latency 0, IRQ 16
    Memory at f7b1c000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci
    00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, fast devsel, latency 0, IRQ 37
    Memory at f7b10000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0, IRQ 27
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0, IRQ 28
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    Memory behind bridge: f7a00000-f7afffff
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0, IRQ 29
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: f7900000-f79fffff
    Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0, IRQ 30
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    Memory behind bridge: f7800000-f78fffff
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04) (prog-if 20 [EHCI])
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, medium devsel, latency 0, IRQ 23
    Memory at f7b1b000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci
    00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, medium devsel, latency 0
    Capabilities: <access denied>
    Kernel driver in use: lpc_ich
    Kernel modules: lpc_ich
    00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 33
    I/O ports at f0b0 [size=8]
    I/O ports at f0a0 [size=4]
    I/O ports at f090 [size=8]
    I/O ports at f080 [size=4]
    I/O ports at f060 [size=32]
    Memory at f7b1a000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: <access denied>
    Kernel driver in use: ahci
    Kernel modules: ahci
    00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: medium devsel, IRQ 18
    Memory at f7b19000 (64-bit, non-prefetchable) [size=256]
    I/O ports at f040 [size=32]
    Kernel modules: i2c_i801
    01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 750M] (rev a1)
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, fast devsel, latency 0, IRQ 39
    Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
    Memory at e0000000 (64-bit, prefetchable) [size=256M]
    Memory at f0000000 (64-bit, prefetchable) [size=32M]
    I/O ports at e000 [size=128]
    Expansion ROM at f7000000 [disabled] [size=512K]
    Capabilities: <access denied>
    Kernel driver in use: nouveau
    Kernel modules: nouveau
    03:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
    Subsystem: AzureWave Device 2126
    Flags: bus master, fast devsel, latency 0, IRQ 18
    Memory at f7a00000 (64-bit, non-prefetchable) [size=512K]
    Expansion ROM at f7a80000 [disabled] [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: ath9k
    Kernel modules: ath9k
    04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
    Subsystem: ASUSTeK Computer Inc. Device 200f
    Flags: bus master, fast devsel, latency 0, IRQ 35
    I/O ports at d000 [size=256]
    Memory at f7900000 (64-bit, non-prefetchable) [size=4K]
    Memory at f2100000 (64-bit, prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: r8169
    Kernel modules: r8169
    05:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
    Subsystem: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader
    Flags: bus master, fast devsel, latency 0, IRQ 31
    Memory at f7800000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>
    Kernel driver in use: rtsx_pci
    Kernel modules: rtsx_pci
    Last edited by Aegidius (2015-01-03 22:04:23)

  • NVIDIA Optimus Display Driver for Windows 7 (64 Bit) interfering with Microsoft Outlook 2013

    Lenovo Community
    Can't explain it nor do I understand it but it appears that the latest NVIDIA Optimus Display Drivers (Version 9.18.13.1270 / 8.15.10.2725, dated 05 Jan 2014) is interfering with Microsoft Outlook 2013. For a week I have been working with Microsoft Technical and Lenovo's Premium Support to no avail. I have reformatted my hard drive 4 times and uninstall and reinstalled Office 2013 Pro more time than I can to remember. The issue stared last Tuesday (18 Mar 2014) when I uploaded new drivers from Lenovo and Microsoft. Outlook would not execute (the initial Outlook dialog would just say processing ....) For four day's Microsoft, Lenovo, and I trouble shot everything under the sun. What was odd was whenever Microsoft or Lenovo technicians took control of my computer Outlook worked fine, and when I stated this to the technicians they thought I was nuts, but once I had control the problem returned. Finally frustrated to the hill I once again reformatted my hard drive but this time installed the Lenovo updates and software one at a time creating numerous restore points along the way. When I updated the new NVIDIA drivers the problem resurfaced.  When I would go into the device manager and uninstall the NVIDIA driver’s outlook once again worked fine.  I finally was able to reinstall (through my restore points) the previous version of drivers and Outlook is working fine.  Is there something to this. ??????
    Jeff

    I always avoid Optimus, it's historically been way too buggy and very little performance bump over HD4000/4600.  I either opt for Quadro machines or just run Intel integrated.  That being said, it's a blessing in disguise for you since Outlook is hideos.  Consider something else, so many better options exist.
    W530 | 3840QM | 32g @ 1.35v CL9 1986z | 512g 840 Pro | 1t HGST 7200 | FHD AUO v.4 | Quadro K2k | GOBI 5k | Centrino 6300

  • XRANDR HDMI problem NVIDIA Optimus proprietary

    Hi,
    Can someone help me understand why when I switch the audio to HIMI the frequency is accelerated? I followed the wiki about the sampling frequency of pulseaudio but has no effect. in practice, the audio is slightly accelerated it seems one octave above. Sorry for my English but I'm using google. I'm Italian.
    Update: I noticed that the video is slightly sped up. only when I pass by HDMI. I am using the proprietary drivers from NVIDIA.
    Update1: Another issue concerns xrandr. when I launch the command xrandr i see only a portion of screen in laptop monitor (3/4 of screen is blasck and the only fouth      visible is
                   passed to HDMI).  I need a mirror of laptop screen over HDMI with different resolution. If I disable the main screen and use only HDMI it's ok but with audio and video speed
                   problem.
    Summary:
    HDMI only works if I do xrandr --off on the main monitor. So it works but with accelerated video and audio.
    if i active both screens I just get a portion visible in the monitor of the laptop (1/4visible 3/4 black) and the visible portion occupies the entire screen over HDMI.
    Update2: I noticed that all the outputs are associated to modesetting
    Update3: I noticed that if i power the lapotop with the HDMI monitor connected after grub boot i have the problem of laptop's screen visible area. At this moment i believe that the
                   problem depend to modesetting module driver.
    My question is: is it possible to change modesetting to xf86-video-intel one? Because if i try to install intel driver i have a conflict between mesa-libgl and nvidia-libgl.
    xrandr --listproviders
    Providers: number : 2
    Provider 0: id: 0x2d9 cap: 0x1, Source Output crtcs: 0 outputs: 0 associated providers: 1 name:NVIDIA-0
    Provider 1: id: 0x47 cap: 0x2, Sink Output crtcs: 3 outputs: 5 associated providers: 1 name:modesetting
    xorg.log WW
    [foxx@arch ~]$ grep WW /var/log/Xorg.0.log
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 23908.923] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 23908.923] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 23908.923] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 23908.923] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 23908.927] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 23908.989] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 23909.163] (WW) NVIDIA(0): Unable to get display device for DPI computation.
    [ 23909.316] (WW) modesetting(G0): Option "AllowEmptyInitialConfiguration" is not used
    [ 23909.316] (WW) modesetting(G0): Option "RenderAccel" is not used
    [ 23909.316] (WW) modesetting(G0): Option "NoRenderExtension" is not used
    [ 23909.316] (WW) modesetting(G0): Option "AllowGLXWithComposite" is not used
    [ 23909.316] (WW) modesetting(G0): Option "AddARGBGLXVisuals" is not used
    [ 23909.316] (WW) modesetting(G0): Option "DamageEvents" is not used
    [ 23909.316] (WW) modesetting(G0): Option "ConnectToAcpid" is not used
    xorg.log EE
    $ grep EE /var/log/Xorg.0.log
    [ 21200.976] Current Operating System: Linux arch 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 21201.034] Initializing built-in extension MIT-SCREEN-SAVER
    [ 21201.065] (EE) Screen 1 deleted because of no matching config section.
    [ 21201.675] (EE) NVIDIA(0): Failed to initiate mode change.
    [ 21201.675] (EE) NVIDIA(0): Failed to complete mode change
    xorg.log HDMI
    $ grep HDMI /var/log/Xorg.0.log
    [ 23908.923] (**) |-->Screen "nvidia_HDMI" (1)
    [ 23908.923] (==) No monitor specified for screen "nvidia_HDMI".
    [ 23909.238] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
    [ 23909.239] (II) modesetting(G0): Output HDMI-1-1 has no monitor section
    [ 23909.315] (II) modesetting(G0): EDID for output HDMI-1-0
    [ 23909.315] (II) modesetting(G0): Printing probed modes for output HDMI-1-0
    [ 23909.316] (II) modesetting(G0): EDID for output HDMI-1-1
    [ 23909.723] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event11)
    [ 23909.723] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event12)
    [ 23909.723] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event13)
    full log:
    cat /var/log/Xorg.0.log
    [ 21200.967]
    X.Org X Server 1.15.1
    Release Date: 2014-04-13
    [ 21200.973] X Protocol Version 11, Revision 0
    [ 21200.974] Build Operating System: Linux 3.14.0-4-ARCH x86_64
    [ 21200.976] Current Operating System: Linux arch 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
    [ 21200.976] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1e5256cb-4f67-4b01-8a6f-237f615fcc8a rw rcutree.rcu_idle_gp_delay=1
    [ 21200.980] Build Date: 14 April 2014 08:39:09AM
    [ 21200.981]
    [ 21200.983] Current version of pixman: 0.32.4
    [ 21200.987] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 21200.987] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 21200.994] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 24 20:35:41 2014
    [ 21200.996] (==) Using config file: "/etc/X11/xorg.conf"
    [ 21200.998] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 21200.998] (==) ServerLayout "layout"
    [ 21200.998] (**) |-->Screen "nvidia" (0)
    [ 21200.998] (**) | |-->Monitor "<default monitor>"
    [ 21200.998] (**) | |-->Device "nvidia"
    [ 21200.998] (==) No monitor specified for screen "nvidia".
    Using a default monitor configuration.
    [ 21200.998] (**) |-->Screen "nvidia_HDMI" (1)
    [ 21200.998] (**) | |-->Monitor "<default monitor>"
    [ 21200.998] (**) | |-->Device "nvidia"
    [ 21200.998] (==) No monitor specified for screen "nvidia_HDMI".
    Using a default monitor configuration.
    [ 21200.998] (**) |-->Inactive Device "intel"
    [ 21200.998] (==) Automatically adding devices
    [ 21200.998] (==) Automatically enabling devices
    [ 21200.998] (==) Automatically adding GPU devices
    [ 21200.998] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 21200.998] Entry deleted from font path.
    [ 21200.998] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 21200.998] Entry deleted from font path.
    [ 21200.998] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 21200.998] Entry deleted from font path.
    [ 21200.998] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 21200.998] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 21200.998] Entry deleted from font path.
    [ 21200.998] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 21200.998] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 21200.998] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 21200.998] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 21200.998] (II) Loader magic: 0x804c80
    [ 21200.998] (II) Module ABI versions:
    [ 21200.998] X.Org ANSI C Emulation: 0.4
    [ 21200.998] X.Org Video Driver: 15.0
    [ 21200.998] X.Org XInput driver : 20.0
    [ 21200.998] X.Org Server Extension : 8.0
    [ 21200.998] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 21200.998] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 21201.002] (--) PCI:*(0:0:2:0) 8086:0416:1028:05fe rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 21201.002] (--) PCI: (0:2:0:0) 10de:0fe4:1028:05fe rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 21201.002] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 21201.004] Initializing built-in extension Generic Event Extension
    [ 21201.006] Initializing built-in extension SHAPE
    [ 21201.008] Initializing built-in extension MIT-SHM
    [ 21201.009] Initializing built-in extension XInputExtension
    [ 21201.011] Initializing built-in extension XTEST
    [ 21201.013] Initializing built-in extension BIG-REQUESTS
    [ 21201.015] Initializing built-in extension SYNC
    [ 21201.017] Initializing built-in extension XKEYBOARD
    [ 21201.019] Initializing built-in extension XC-MISC
    [ 21201.021] Initializing built-in extension SECURITY
    [ 21201.023] Initializing built-in extension XINERAMA
    [ 21201.024] Initializing built-in extension XFIXES
    [ 21201.026] Initializing built-in extension RENDER
    [ 21201.028] Initializing built-in extension RANDR
    [ 21201.030] Initializing built-in extension COMPOSITE
    [ 21201.032] Initializing built-in extension DAMAGE
    [ 21201.034] Initializing built-in extension MIT-SCREEN-SAVER
    [ 21201.036] Initializing built-in extension DOUBLE-BUFFER
    [ 21201.037] Initializing built-in extension RECORD
    [ 21201.039] Initializing built-in extension DPMS
    [ 21201.041] Initializing built-in extension Present
    [ 21201.043] Initializing built-in extension DRI3
    [ 21201.045] Initializing built-in extension X-Resource
    [ 21201.047] Initializing built-in extension XVideo
    [ 21201.049] Initializing built-in extension XVideo-MotionCompensation
    [ 21201.050] Initializing built-in extension XFree86-VidModeExtension
    [ 21201.052] Initializing built-in extension XFree86-DGA
    [ 21201.054] Initializing built-in extension XFree86-DRI
    [ 21201.056] Initializing built-in extension DRI2
    [ 21201.056] (II) LoadModule: "glx"
    [ 21201.056] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 21201.063] (II) Module glx: vendor="NVIDIA Corporation"
    [ 21201.063] compiled for 4.0.2, module version = 1.0.0
    [ 21201.063] Module class: X.Org Server Extension
    [ 21201.063] (II) NVIDIA GLX Module 337.25 Tue May 27 12:21:38 PDT 2014
    [ 21201.064] Loading extension GLX
    [ 21201.064] (II) LoadModule: "nvidia"
    [ 21201.064] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 21201.064] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 21201.064] compiled for 4.0.2, module version = 1.0.0
    [ 21201.064] Module class: X.Org Video Driver
    [ 21201.064] (II) LoadModule: "modesetting"
    [ 21201.065] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 21201.065] (II) Module modesetting: vendor="X.Org Foundation"
    [ 21201.065] compiled for 1.15.0, module version = 0.8.1
    [ 21201.065] Module class: X.Org Video Driver
    [ 21201.065] ABI class: X.Org Video Driver, version 15.0
    [ 21201.065] (II) NVIDIA dlloader X Driver 337.25 Tue May 27 12:01:55 PDT 2014
    [ 21201.065] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 21201.065] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 21201.065] (++) using VT number 1
    [ 21201.065] (II) Loading sub module "fb"
    [ 21201.065] (II) LoadModule: "fb"
    [ 21201.065] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 21201.065] (II) Module fb: vendor="X.Org Foundation"
    [ 21201.065] compiled for 1.15.1, module version = 1.0.0
    [ 21201.065] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 21201.065] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 21201.065] (II) Loading sub module "wfb"
    [ 21201.065] (II) LoadModule: "wfb"
    [ 21201.065] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 21201.065] (II) Module wfb: vendor="X.Org Foundation"
    [ 21201.065] compiled for 1.15.1, module version = 1.0.0
    [ 21201.065] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 21201.065] (II) Loading sub module "ramdac"
    [ 21201.065] (II) LoadModule: "ramdac"
    [ 21201.065] (II) Module "ramdac" already built-in
    [ 21201.065] (II) modesetting(1): using drv /dev/dri/card0
    [ 21201.065] (II) modesetting(G0): using drv /dev/dri/card0
    [ 21201.065] (EE) Screen 1 deleted because of no matching config section.
    [ 21201.065] (II) UnloadModule: "modesetting"
    [ 21201.065] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 21201.065] (==) NVIDIA(0): RGB weight 888
    [ 21201.065] (==) NVIDIA(0): Default visual is TrueColor
    [ 21201.065] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 21201.065] (**) NVIDIA(0): Option "ConstrainCursor" "off"
    [ 21201.065] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" "on"
    [ 21201.066] (**) NVIDIA(0): Enabling 2D acceleration
    [ 21201.235] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 21201.237] (II) NVIDIA(0): NVIDIA GPU GeForce GT 750M (GK107) at PCI:2:0:0 (GPU-0)
    [ 21201.237] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 21201.237] (--) NVIDIA(0): VideoBIOS: 80.07.b3.00.10
    [ 21201.237] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 21201.237] (--) NVIDIA(0): Valid display device(s) on GeForce GT 750M at PCI:2:0:0
    [ 21201.237] (--) NVIDIA(0): none
    [ 21201.237] (II) NVIDIA(0): Validated MetaModes:
    [ 21201.237] (II) NVIDIA(0): "NULL"
    [ 21201.237] (**) NVIDIA(0): Virtual screen size configured to be 16384 x 16384
    [ 21201.237] (WW) NVIDIA(0): Unable to get display device for DPI computation.
    [ 21201.237] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 21201.237] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
    [ 21201.237] (==) modesetting(G0): RGB weight 888
    [ 21201.237] (==) modesetting(G0): Default visual is TrueColor
    [ 21201.237] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
    [ 21201.237] (II) modesetting(G0): Output eDP-1-0 has no monitor section
    [ 21201.261] (II) modesetting(G0): Output VGA-1-0 has no monitor section
    [ 21201.312] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
    [ 21201.312] (II) modesetting(G0): Output DisplayPort-1-0 has no monitor section
    [ 21201.312] (II) modesetting(G0): Output HDMI-1-1 has no monitor section
    [ 21201.312] (II) modesetting(G0): EDID for output eDP-1-0
    [ 21201.312] (II) modesetting(G0): Manufacturer: SHP Model: 13f8 Serial#: 0
    [ 21201.312] (II) modesetting(G0): Year: 2013 Week: 34
    [ 21201.312] (II) modesetting(G0): EDID Version: 1.4
    [ 21201.312] (II) modesetting(G0): Digital Display Input
    [ 21201.312] (II) modesetting(G0): 8 bits per channel
    [ 21201.312] (II) modesetting(G0): Digital interface is DisplayPort
    [ 21201.312] (II) modesetting(G0): Max Image Size [cm]: horiz.: 35 vert.: 19
    [ 21201.312] (II) modesetting(G0): Gamma: 2.20
    [ 21201.312] (II) modesetting(G0): No DPMS capabilities specified
    [ 21201.312] (II) modesetting(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 21201.312] (II) modesetting(G0): Default color space is primary color space
    [ 21201.312] (II) modesetting(G0): First detailed timing is preferred mode
    [ 21201.312] (II) modesetting(G0): Preferred mode is native pixel format and refresh rate
    [ 21201.313] (II) modesetting(G0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
    [ 21201.313] (II) modesetting(G0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
    [ 21201.313] (II) modesetting(G0): Manufacturer's mask: 0
    [ 21201.313] (II) modesetting(G0): Supported detailed timing:
    [ 21201.313] (II) modesetting(G0): clock: 373.2 MHz Image Size: 346 x 194 mm
    [ 21201.313] (II) modesetting(G0): h_active: 3200 h_sync: 3248 h_sync_end 3280 h_blank_end 3360 h_border: 0
    [ 21201.313] (II) modesetting(G0): v_active: 1800 v_sync: 1803 v_sync_end 1808 v_blanking: 1852 v_border: 0
    [ 21201.313] (II) modesetting(G0): 6RGW0LQ156Z1
    [ 21201.313] (II) modesetting(G0): Unknown vendor-specific block 0
    [ 21201.313] (II) modesetting(G0): EDID (in hex):
    [ 21201.313] (II) modesetting(G0): 00ffffffffffff004d10f81300000000
    [ 21201.313] (II) modesetting(G0): 22170104a52313780ede50a3544c9926
    [ 21201.313] (II) modesetting(G0): 0f505400000001010101010101010101
    [ 21201.313] (II) modesetting(G0): 010101010101cd9180a0c00834703020
    [ 21201.313] (II) modesetting(G0): 35005ac2100000180000001000000000
    [ 21201.313] (II) modesetting(G0): 00000000000000000000000000fe0036
    [ 21201.313] (II) modesetting(G0): 52475730804c513135365a3100000000
    [ 21201.313] (II) modesetting(G0): 0002010328001200000b010a2020001b
    [ 21201.313] (II) modesetting(G0): Printing probed modes for output eDP-1-0
    [ 21201.313] (II) modesetting(G0): Modeline "3200x1800"x60.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
    [ 21201.313] (II) modesetting(G0): Modeline "2048x1536"x60.0 266.95 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
    [ 21201.337] (II) modesetting(G0): EDID for output VGA-1-0
    [ 21201.389] (II) Quirked EDID physical size to 0x0 cm
    [ 21201.389] (II) modesetting(G0): EDID for output HDMI-1-0
    [ 21201.389] (II) modesetting(G0): Manufacturer: ONK Model: b62 Serial#: 0
    [ 21201.389] (II) modesetting(G0): Year: 2011 Week: 0
    [ 21201.389] (II) modesetting(G0): EDID Version: 1.3
    [ 21201.389] (II) modesetting(G0): Digital Display Input
    [ 21201.389] (II) modesetting(G0): Indeterminate output size
    [ 21201.389] (II) modesetting(G0): Gamma: 2.40
    [ 21201.389] (II) modesetting(G0): No DPMS capabilities specified
    [ 21201.389] (II) modesetting(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 21201.389] (II) modesetting(G0): First detailed timing is preferred mode
    [ 21201.389] (II) modesetting(G0): redX: 0.640 redY: 0.334 greenX: 0.286 greenY: 0.599
    [ 21201.389] (II) modesetting(G0): blueX: 0.514 blueY: 0.077 whiteX: 0.312 whiteY: 0.329
    [ 21201.389] (II) modesetting(G0): Supported established timings:
    [ 21201.389] (II) modesetting(G0): 640x480@60Hz
    [ 21201.389] (II) modesetting(G0): 800x600@60Hz
    [ 21201.389] (II) modesetting(G0): 1024x768@60Hz
    [ 21201.389] (II) modesetting(G0): Manufacturer's mask: 0
    [ 21201.389] (II) modesetting(G0): Supported detailed timing:
    [ 21201.389] (II) modesetting(G0): clock: 85.5 MHz Image Size: 160 x 90 mm
    [ 21201.389] (II) modesetting(G0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
    [ 21201.389] (II) modesetting(G0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
    [ 21201.389] (II) modesetting(G0): Supported detailed timing:
    [ 21201.389] (II) modesetting(G0): clock: 74.2 MHz Image Size: 160 x 90 mm
    [ 21201.389] (II) modesetting(G0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 21201.389] (II) modesetting(G0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 21201.389] (II) modesetting(G0): Monitor name: TX-NR609
    [ 21201.389] (II) modesetting(G0): Ranges: V min: 23 V max: 60 Hz, H min: 26 H max: 68 kHz, PixClock max 155 MHz
    [ 21201.389] (II) modesetting(G0): Supported detailed timing:
    [ 21201.389] (II) modesetting(G0): clock: 74.2 MHz Image Size: 160 x 90 mm
    [ 21201.389] (II) modesetting(G0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 21201.389] (II) modesetting(G0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 21201.389] (II) modesetting(G0): Supported detailed timing:
    [ 21201.389] (II) modesetting(G0): clock: 74.2 MHz Image Size: 160 x 90 mm
    [ 21201.389] (II) modesetting(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 21201.389] (II) modesetting(G0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 21201.389] (II) modesetting(G0): Supported detailed timing:
    [ 21201.389] (II) modesetting(G0): clock: 74.2 MHz Image Size: 160 x 90 mm
    [ 21201.389] (II) modesetting(G0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
    [ 21201.389] (II) modesetting(G0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 21201.389] (II) modesetting(G0): Number of EDID sections to follow: 1
    [ 21201.389] (II) modesetting(G0): EDID (in hex):
    [ 21201.389] (II) modesetting(G0): 00ffffffffffff003dcb620b00000000
    [ 21201.389] (II) modesetting(G0): 001501038010098c0ae5b1a355499983
    [ 21201.389] (II) modesetting(G0): 13505421080001010101010101010101
    [ 21201.389] (II) modesetting(G0): 010101010101662150b051001b304070
    [ 21201.389] (II) modesetting(G0): 3600a05a0000001e011d007251d01e20
    [ 21201.389] (II) modesetting(G0): 6e285500a05a0000001e000000fc0054
    [ 21201.389] (II) modesetting(G0): 582d4e523630390a20202020000000fd
    [ 21201.389] (II) modesetting(G0): 00173c1a440f000a202020202020012d
    [ 21201.389] (II) modesetting(G0): 02033cf153841305140312101f202122
    [ 21201.389] (II) modesetting(G0): 06150f1e0a19242638097f070f7f0717
    [ 21201.389] (II) modesetting(G0): 07503f06c04d02005706005f7e016754
    [ 21201.389] (II) modesetting(G0): 00834f000066030c00250080011d00bc
    [ 21201.389] (II) modesetting(G0): 52d01e20b8285540a05a0000001e011d
    [ 21201.389] (II) modesetting(G0): 8018711c1620582c2500a05a0000009e
    [ 21201.389] (II) modesetting(G0): 011d80d0721c1620102c2580a05a0000
    [ 21201.389] (II) modesetting(G0): 009e0000000000000000000000000043
    [ 21201.389] (II) modesetting(G0): Printing probed modes for output HDMI-1-0
    [ 21201.389] (II) modesetting(G0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x30.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x25.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x30.0 74.18 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "2880x576"x50.0 108.00 2880 2928 3184 3456 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "2880x576i"x50.0 54.00 2880 2928 3180 3456 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "2880x480"x60.0 108.11 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "2880x480"x59.9 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "2880x480i"x60.0 54.05 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "2880x480i"x59.9 54.00 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1440x576"x50.0 54.00 1440 1464 1592 1728 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1440x576i"x50.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1440x480"x60.0 54.05 1440 1472 1596 1716 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1440x480"x59.9 54.00 1440 1472 1596 1716 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1440x480i"x60.0 27.03 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1440x480i"x59.9 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): EDID for output DisplayPort-1-0
    [ 21201.389] (II) modesetting(G0): EDID for output HDMI-1-1
    [ 21201.389] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 21201.389] (==) modesetting(G0): DPI set to (96, 96)
    [ 21201.389] (II) Loading sub module "fb"
    [ 21201.389] (II) LoadModule: "fb"
    [ 21201.390] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 21201.390] (II) Module fb: vendor="X.Org Foundation"
    [ 21201.390] compiled for 1.15.1, module version = 1.0.0
    [ 21201.390] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 21201.390] (II) Loading sub module "shadow"
    [ 21201.390] (II) LoadModule: "shadow"
    [ 21201.390] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 21201.390] (II) Module shadow: vendor="X.Org Foundation"
    [ 21201.390] compiled for 1.15.1, module version = 1.1.0
    [ 21201.390] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 21201.390] (--) Depth 24 pixmap format is 32 bpp
    [ 21201.390] (==) modesetting(G0): Backing store enabled
    [ 21201.390] (==) modesetting(G0): Silken mouse enabled
    [ 21201.390] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 21201.390] (==) modesetting(G0): DPMS enabled
    [ 21201.390] (WW) modesetting(G0): Option "AllowEmptyInitialConfiguration" is not used
    [ 21201.671] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 21201.671] (II) NVIDIA: access.
    [ 21201.675] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 21201.675] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 21201.675] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 21201.675] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 21201.675] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 21201.675] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 21201.675] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 21201.675] (II) NVIDIA(0): Config Options in the README.
    [ 21201.675] (II) NVIDIA(0): Setting mode "NULL"
    [ 21201.675] (EE) NVIDIA(0): Failed to initiate mode change.
    [ 21201.675] (EE) NVIDIA(0): Failed to complete mode change
    [ 21201.735] Loading extension NV-GLX
    [ 21201.742] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 21201.742] (==) NVIDIA(0): Backing store enabled
    [ 21201.742] (==) NVIDIA(0): Silken mouse enabled
    [ 21201.742] (==) NVIDIA(0): DPMS enabled
    [ 21201.742] Loading extension NV-CONTROL
    [ 21201.742] (II) Loading sub module "dri2"
    [ 21201.742] (II) LoadModule: "dri2"
    [ 21201.742] (II) Module "dri2" already built-in
    [ 21201.742] (II) NVIDIA(0): [DRI2] Setup complete
    [ 21201.742] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 21201.742] (--) RandR disabled
    [ 21201.748] (II) Initializing extension GLX
    [ 21201.749] (II) modesetting(G0): Damage tracking initialized
    [ 21201.775] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 21201.775] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 21201.775] (II) LoadModule: "evdev"
    [ 21201.775] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 21201.776] (II) Module evdev: vendor="X.Org Foundation"
    [ 21201.776] compiled for 1.15.1, module version = 2.9.0
    [ 21201.776] Module class: X.Org XInput Driver
    [ 21201.776] ABI class: X.Org XInput driver, version 20.0
    [ 21201.776] (II) Using input driver 'evdev' for 'Power Button'
    [ 21201.776] (**) Power Button: always reports core events
    [ 21201.776] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 21201.776] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 21201.776] (--) evdev: Power Button: Found keys
    [ 21201.776] (II) evdev: Power Button: Configuring as keyboard
    [ 21201.776] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 21201.776] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 21201.776] (**) Option "xkb_rules" "evdev"
    [ 21201.776] (**) Option "xkb_model" "pc104"
    [ 21201.776] (**) Option "xkb_layout" "it"
    [ 21201.776] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 21201.788] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 21201.788] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 21201.788] (II) Using input driver 'evdev' for 'Video Bus'
    [ 21201.788] (**) Video Bus: always reports core events
    [ 21201.788] (**) evdev: Video Bus: Device: "/dev/input/event4"
    [ 21201.788] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 21201.788] (--) evdev: Video Bus: Found keys
    [ 21201.788] (II) evdev: Video Bus: Configuring as keyboard
    [ 21201.788] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
    [ 21201.788] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 21201.788] (**) Option "xkb_rules" "evdev"
    [ 21201.788] (**) Option "xkb_model" "pc104"
    [ 21201.788] (**) Option "xkb_layout" "it"
    [ 21201.788] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 21201.788] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
    [ 21201.788] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 21201.788] (II) Using input driver 'evdev' for 'Video Bus'
    [ 21201.788] (**) Video Bus: always reports core events
    [ 21201.788] (**) evdev: Video Bus: Device: "/dev/input/event3"
    [ 21201.788] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 21201.788] (--) evdev: Video Bus: Found keys
    [ 21201.788] (II) evdev: Video Bus: Configuring as keyboard
    [ 21201.788] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input3/event3"
    [ 21201.788] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 21201.788] (**) Option "xkb_rules" "evdev"
    [ 21201.788] (**) Option "xkb_model" "pc104"
    [ 21201.788] (**) Option "xkb_layout" "it"
    [ 21201.788] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 21201.788] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 21201.789] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 21201.789] (II) Using input driver 'evdev' for 'Power Button'
    [ 21201.789] (**) Power Button: always reports core events
    [ 21201.789] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 21201.789] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 21201.789] (--) evdev: Power Button: Found keys
    [ 21201.789] (II) evdev: Power Button: Configuring as keyboard
    [ 21201.789] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
    [ 21201.789] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
    [ 21201.789] (**) Option "xkb_rules" "evdev"
    [ 21201.789] (**) Option "xkb_model" "pc104"
    [ 21201.789] (**) Option "xkb_layout" "it"
    [ 21201.789] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 21201.789] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 21201.789] (II) No input driver specified, ignoring this device.
    [ 21201.789] (II) This device may have been added with another device file.
    [ 21201.789] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 21201.789] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 21201.789] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event11)
    [ 21201.789] (II) No input driver specified, ignoring this device.
    [ 21201.789] (II) This device may have been added with another device file.
    [ 21201.789] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event12)
    [ 21201.789] (II) No input driver specified, ignoring this device.
    [ 21201.789] (II) This device may have been added with another device file.
    [ 21201.789] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event13)
    [ 21201.789] (II) No input driver specified, ignoring this device.
    [ 21201.789] (II) This device may have been added with another device file.
    [ 21201.789] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event14)
    [ 21201.789] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
    [ 21201.789] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
    [ 21201.789] (**) Integrated_Webcam_HD: always reports core events
    [ 21201.789] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event14"
    [ 21201.789] (--) evdev: Integrated_Webcam_HD: Vendor 0xbda Product 0x573c
    [ 21201.789] (--) evdev: Integrated_Webcam_HD: Found keys
    [ 21201.789] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
    [ 21201.789] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input16/event14"
    [ 21201.790] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 10)
    [ 21201.790] (**) Option "xkb_rules" "evdev"
    [ 21201.790] (**) Option "xkb_model" "pc104"
    [ 21201.790] (**) Option "xkb_layout" "it"
    [ 21201.790] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 21201.790] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event6)
    [ 21201.790] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
    [ 21201.790] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
    [ 21201.790] (**) USB OPTICAL MOUSE: always reports core events
    [ 21201.790] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event6"
    [ 21201.790] (--) evdev: USB OPTICAL MOUSE: Vendor 0 Product 0x538
    [ 21201.790] (--) evdev: USB OPTICAL MOUSE: Found 3 mouse buttons
    [ 21201.790] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
    [ 21201.790] (--) evdev: USB OPTICAL MOUSE: Found relative axes
    [ 21201.790] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
    [ 21201.790] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
    [ 21201.790] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
    [ 21201.790] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
    [ 21201.790] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 21201.790] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0000:0538.0001/input/input7/event6"
    [ 21201.790] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 11)
    [ 21201.790] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
    [ 21201.790] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
    [ 21201.790] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
    [ 21201.790] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
    [ 21201.790] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
    [ 21201.790] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
    [ 21201.790] (II) No input driver specified, ignoring this device.
    [ 21201.790] (II) This device may have been added with another device file.
    [ 21201.790] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
    [ 21201.790] (II) No input driver specified, ignoring this device.
    [ 21201.790] (II) This device may have been added with another device file.
    [ 21201.790] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
    [ 21201.790] (II) No input driver specified, ignoring this device.
    [ 21201.790] (II) This device may have been added with another device file.
    [ 21201.791] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
    [ 21201.791] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 21201.791] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 21201.791] (**) AT Translated Set 2 keyboard: always reports core events
    [ 21201.791] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
    [ 21201.791] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 21201.791] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 21201.791] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 21201.791] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
    [ 21201.791] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
    [ 21201.791] (**) Option "xkb_rules" "evdev"
    [ 21201.791] (**) Option "xkb_model" "pc104"
    [ 21201.791] (**) Option "xkb_layout" "it"
    [ 21201.791] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 21201.791] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
    [ 21201.791] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 21201.791] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
    [ 21201.791] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 21201.791] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event15"
    [ 21201.791] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 21201.791] (--) evdev: SynPS/2 Synaptics TouchPad: Found 1 mouse buttons
    [ 21201.791] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
    [ 21201.791] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
    [ 21201.791] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
    [ 21201.791] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
    [ 21201.791] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
    [ 21201.791] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
    [ 21201.791] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 21201.791] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event15"
    [ 21201.791] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
    [ 21201.791] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
    [ 21201.791] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 21201.791] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 21201.791] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 21201.791] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 21201.791] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 21201.791] (II) No input driver specified, ignoring this device.
    [ 21201.791] (II) This device may have been added with another device file.
    [ 21201.791] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
    [ 21201.791] (II) No input driver specified, ignoring this device.
    [ 21201.791] (II) This device may have been added with another device file.
    [ 21201.792] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
    [ 21201.792] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 21201.792] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 21201.792] (**) Dell WMI hotkeys: always reports core events
    [ 21201.792] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event9"
    [ 21201.792] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
    [ 21201.792] (--) evdev: Dell WMI hotkeys: Found keys
    [ 21201.792] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
    [ 21201.792] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event9"
    [ 21201.792] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
    [ 21201.792] (**) Option "xkb_rules" "evdev"
    [ 21201.792] (**) Option "xkb_model" "pc104"
    [ 21201.792] (**) Option "xkb_layout" "it"
    [ 21201.792] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 21201.798] (II) modesetting(G0): EDID vendor "SHP", prod id 5112
    [ 21201.798] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21201.798] (II) modesetting(G0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
    [ 21201.875] (II) Quirked EDID physical size to 0x0 cm
    [ 21201.876] reporting 3 5 56 458
    [ 21201.894] have a master to look out for
    [ 21201.894] adjust shatters 0 3200
    [ 21201.898] need to create shared pixmap 1have a master to look out for
    [ 21202.498] need to create shared pixmap 1(II) modesetting(G0): EDID vendor "SHP", prod id 5112
    [ 21203.343] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21203.343] (II) modesetting(G0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
    [ 21203.419] (II) Quirked EDID physical size to 0x0 cm
    [ 21203.419] reporting 3 5 56 458
    [ 21203.539] (II) Quirked EDID physical size to 0x0 cm
    [ 21203.539] (II) modesetting(G0): EDID vendor "ONK", prod id 2914
    [ 21203.539] (II) modesetting(G0): Using hsync ranges from config file
    [ 21203.539] (II) modesetting(G0): Using vrefresh ranges from config file
    [ 21203.539] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21203.539] (II) modesetting(G0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
    [ 21203.539] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "2880x480i"x0.0 54.00 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "2880x576i"x0.0 54.00 2880 2928 3180 3456 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "2880x576"x0.0 108.00 2880 2928 3184 3456 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080i"x0.0 72.00 1920 1952 2120 2304 1080 1126 1136 1250 interlace +hsync -vsync (31.2 kHz e)
    [ 21203.539] reporting 3 5 56 458
    [ 21203.649] (II) Quirked EDID physical size to 0x0 cm
    [ 21203.649] (II) modesetting(G0): EDID vendor "ONK", prod id 2914
    [ 21203.649] (II) modesetting(G0): Using hsync ranges from config file
    [ 21203.649] (II) modesetting(G0): Using vrefresh ranges from config file
    [ 21203.649] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21203.649] (II) modesetting(G0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
    [ 21203.649] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "2880x480i"x0.0 54.00 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "2880x576i"x0.0 54.00 2880 2928 3180 3456 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "2880x576"x0.0 108.00 2880 2928 3184 3456 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080i"x0.0 72.00 1920 1952 2120 2304 1080 1126 1136 1250 interlace +hsync -vsync (31.2 kHz e)
    [ 21203.649] reporting 3 5 56 458
    [ 21203.725] (II) Quirked EDID physical size to 0x0 cm
    [ 21203.725] (II) modesetting(G0): EDID vendor "ONK", prod id 2914
    [ 21203.725] (II) modesetting(G0): Using hsync ranges from config file
    [ 21203.725] (II) modesetting(G0): Using vrefresh ranges from config file
    [ 21203.725] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21203.725] (II) modesetting(G0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
    [ 21203.725] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "2880x480i"x0.0 54.00 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "2880x576i"x0.0 54.00 2880 2928 3180 3456 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "2880x576"x0.0 108.00 2880 2928 3184 3456 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080i"x0.0 72.00 1920 1952 2120 2304 1080 1126 1136 1250 interlace +hsync -vsync (31.2 kHz e)
    [ 21203.726] reporting 3 5 56 458
    [ 21210.172] (II) Quirked EDID physical size to 0x0 cm
    [ 21210.172] (II) modesetting(G0): EDID vendor "ONK", prod id 2914
    [ 21210.172] (II) modesetting(G0): Using hsync ranges from config file
    [ 21210.172] (II) modesetting(G0): Using vrefresh ranges from config file
    [ 21210.172] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21210.172] (II) modesetting(G0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
    [ 21210.172] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "2880x480i"x0.0 54.00 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "2880x576i"x0.0 54.00 2880 2928 3180 3456 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "2880x576"x0.0 108.00 2880 2928 3184 3456 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080i"x0.0 72.00 1920 1952 2120 2304 1080 1126 1136 1250 interlace +hsync -vsync (31.2 kHz e)
    [ 21210.173] reporting 3 5 56 458
    [ 21210.337] reporting 3 5 56 458
    [ 21214.902] (II) Quirked EDID physical size to 0x0 cm
    [ 21214.902] (II) modesetting(G0): EDID vendor "ONK", prod id 2914
    [ 21214.902] (II) modesetting(G0): Using hsync ranges from config file
    [ 21214.902] (II) modesetting(G0): Using vrefresh ranges from config file
    [ 21214.902] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21214.902] (II) modesetting(G0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
    [ 21214.902] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "2880x480i"x0.0 54.00 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "2880x576i"x0.0 54.00 2880 2928 3180 3456 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "2880x576"x0.0 108.00 2880 2928 3184 3456 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080i"x0.0 72.00 1920 1952 2120 2304 1080 1126 1136 1250 interlace +hsync -vsync (31.2 kHz e)
    [ 21214.903] reporting 3 5 56 458
    [ 21214.904] have a master to look out for
    [ 21214.942] need to create shared pixmap 1reporting 3 5 56 458
    [ 21215.145] (II) Quirked EDID physical size to 0x0 cm
    [ 21215.145] (II) modesetting(G0): EDID vendor "ONK", prod id 2914
    [ 21215.145] (II) modesetting(G0): Using hsync ranges from config file
    [ 21215.145] (II) modesetting(G0): Using vrefresh ranges from config file
    [ 21215.145] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21215.145] (II) modesetting(G0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
    [ 21215.145] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "2880x480i"x0.0 54.00 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "2880x576i"x0.0 54.00 2880 2928 3180 3456 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21215.146] (II) modesetting(G0): Modeline "2880x576"x0.0 108.00 2880 2928 3184 3456 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21215.146] (II) modesetting(G0): Modeline "1920x1080i"x0.0 72.00 1920 1952 2120 2304 1080 1126 1136 1250 interlace +hsync -vsync (31.2 kHz e)
    [ 21215.146] reporting 3 5 56 458
    [ 21215.147] reporting 3 5 56 458
    [ 21215.147] reporting 3 5 56 458
    [ 21215.149] (II) modesetting(G0): EDI

    foxx81 wrote:...P.S. I'm sorry.I have yet posted it on newbie corner and I don't know how to delete it.
    I have closed and dust binned the other thread.  You might want to read my moderator comments there.
    As to this problem, this is a new one on me.  Be patient, someone will help.  Try providing a bit more information if you can.
    I do agree, this is not a 'Newbie' issue.
    Last edited by ewaller (2014-06-24 20:24:22)

  • Both nouveau and nVidia driver problems with Stellarium

    Stellarium v0.12.4 with either xf86-video-nouveau 1.0.9-1 or nvidia (latest driver) and an nVidia MCP78S (GeForce 8200) chip usually results in either distorted graphics and sometimes complete system lock-up.
    The nVidia driver is worse, nouveau sometimes works but its a crap shoot. This has been going on for about 2 months now, and I have tested both drivers.
    With nouveau it dumps these boot errors, but works on other software just fine:
    Oct 21 17:17:48 eagle kernel: nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x10022c
    Oct 21 17:17:48 eagle kernel: nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x100230
    Oct 21 17:17:48 eagle kernel: nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x1002e4
    I cannot use the nvidia driver in general because it sometimes causes graphics faults when using Chromium.
    I don't get any other graphics issues other than with Stellarium (and obviously I cannot run google-earth with nouveau either).
    Any ideas on where to start with this problem would be appreciated.

    Thanks for answering!
    Following your advice, I downloaded and installed the latest driver from Nvidia (http://www.nvidia.fr/object/notebook-win7-winvista-64bit-260.99-whql-driver-fr.html). I'm not sure this is the one I updated on the first place since I don't remember when I did it (it was a few months ago, and as I had internet without using wi-fi, I didn't see that much the BSOD, but now that I'm back to wi-fi, the problem occurs often). Until now, no BSOD, but the first problem "Display Driver Stopped Responding and Has Recovered" is still here, and a little bit more annoying since it can occurs while watching some video files (it didn't happen before).
    For the BIOS problem, it was the one described on the link you gave, but no the problem is over. I was just thinking it could be relevant to understand the others problems.
    I'll let you know if the BSOD is (or seems) definitively gone. In the meantime, if someone knows how to fix the problem of the display driver that stopped responding and was recovered, it would be greatly appreciated!

  • NVidia Capture Driver VS Leadtek TV Tuner problem

    I previously have used Leadtek WInfast TV Tuner 2000/XP before I installed MSI Geforce4MX 460-VTP with VIVO.
    I never installed the capture driver for the Geforce card though, because I do not see the need. Besides I prefer to use the tv tuner to record my tv programs.
    Another reason why I didn't install the NVidia capture driver is because I realize that it will cause some conflicts with the Leadtek TVTUner card driver because both are actually installing the same device drivers for the same tv-chip hardware located on both card.
    NVidia Capture Driver will install these hardwares in Device Manager:
    - Nvidia WDM Audio Capture
    - Nvidia WDM Crossbar
    - Nvidia WDM TVTuner
    - NVidia WDM Video Capture
    while, the Leadtek TVTUner driver will install the same driver for its own hardwares:
    - Winfast TV2000-XP Audio Capture
    - Winfast TV2000-XP Crossbar
    - Winfast TV2000-XP TVTuner
    - Winfast TV2000-XP Video Capture
    Surely installing Nvidia Capture driver & Leadtek TV TUner driver will cause WinXP confused because it finds 2 sets of the same hardwares.
    As I previously explained, I currently didn't install the Nvidia Capture Driver, and relies mainly on the Leadtek TVTuner to watch tv programs.  The problem is when I tried to use some recording softwares like TVTools, these softwares will only find the NVidia TV Tuner hardware instead of my Leadtek TV Tuner.  
    How could I solve this problem ?
    Is there any way to make both hardwares (Leadtek tv tuner & NVidia capture driver) work together ?

    It's got to be either a configuration issue or an incompatability with hardware because I have installed several of those cards on friends and client PC's without a single problem. I will say they all had nVidia VGA cards and either the nvidia or via chipset. I also have one and I can't find a better card for the $ and the ease of use, nice clean straight forward GUI and stability.
    Have you tried the latest drivers and PVS from leadtek's website?
    This thread should be in the VGA forum with a link here just in case a user with your mobo has this card.
    It's not in a shared slot is it? Have you looked for IRQ conflicts? Try removing the bluetooth and modem temporarily so you only have that one TV card, then check the IRQ's. If you have to move the card to another slot. The best slots are the second and third one down from the top (where the AGP slot is) and not the first and the last slot. Try operation then. Does this fix the problem? If so then you have to find the best slots for the BT and the modem.
    Good luck.

  • Ultra 40 fx3500 nvidia driver problem with XP

    Hello,
    I have a Sun Ultra 40 Workstation with an fx3500 graphic-card. With Solaris, Mandriva and 64Bit-Windows
    the card works without problems. But with XP 32-Bit only the old 9x drivers from Nvidia work. If I try to
    install a driver-release above 100 (today I tried 191.00, but I also have tried many other releases) the driver
    installs fine. But after rebooting the workstation powercycles short before the Windows-Login-Screen
    appears and Windows boots in "Safe-Mode". Then I can install the old 9x drivers and XP works again.
    I tried a tool which wipes out the old Nvidia-driver first, bevor installing the new one, but no success.
    Why is it not possible to install new Nvidia-drivers?
    After the second boot when the driver has failed to load, the following messages appears on the screen
    after the Bios has finished:
    "Nvidia Rom Bios" "Detecting Arrays"
    I could not read the whole text, because the message appears only a very short time, so I could not
    read the message exactly. But the message only appears after the problem with the graphics card driver.
    I have not configured disk-arrays. I'm not shure, but is it possible that there is something wrong with
    the Nvidia-fx3500, the Nvidia-mainboard-Chipset and the Nvidia-graphics-driver above the 100. release.
    Can you please help me?
    Best Regards
    Ralf

    First of all, thank you guys for your replies, and sorry if I answer you late; but I was tring to apply some of your suggestions.
    pharao:
    My old card was "the stupid" (Hercules 3D Prophet 4000XT with Kyro 4000XT chipset)
    Hotoro:
    What do you mean by reload Windows XP? Un/Re-Install it?! It is not a good solution for me, at least, right now. I have huge data, my settings and a lot of application installed that needs days to restore or reconfigure, and I do not think that I have that much time.
    daveg4otu (Dave):
    Thank you for your help. I already removed old card drivers and registry entries, and now I also removed the new ones using "Driver Cleaner" as you suggest, but the same was the result
    Raven236:
    No, my old card was not ATI. OK, I will try this new driver (56.72), but I can not keep downloading all drivers without result, can I?
    coollg:
    I do not think so, because the card is working fine on the same PC on Windows 98SE. So, it is not Mainboard, AGP or compatibility problem, as I think. In other hand, you are right, I am not expecting to get the maximum performance from that card, I am, now, looking for the minimum.
    Did I have to do someting else?!!!
    Thanks again.

  • NVIDIA Propriatery driver - Optimus

    I am trying to install nvidia propriatery driver which I downloaded from nvidia website. Nouveau is deactivated properly. I already installed 'pacman -S linux-headers'
    I execute the following command:
    sh ./NVIDIA-Linux-x86_64-310.32.run
    I am getting the following error:
    If you are using a linux 2.4 Kernel, please make sure ...
    if you are using a linux 2.6 kernel, please make sure ...
    Depending on where and how the kernel sources (or the kernel headers) were installed, you may need to to specify their location with the SYSSRC ...
    Why is it not finding the appropriate header files?
    Last edited by Archie_Enthusiasm (2013-03-01 16:11:12)

    sudo pacman -S nvidia
    + info Nvidia Arch Wiki

Maybe you are looking for

  • Error 39008: logical table does not join to fact source

    About to lose my mind over this error! I'm told logical table IT_WORK_ITEM_D (a dimension) does not join to any fact source, although it should show as joined to IT_WORK_ITEM_DSNPSHT_F - I have verified the physical joins - I have verified the busine

  • I am trying to download Acrobat X Standard

    My employer had to reformat a computer, we have a card with an adobe acrobat x standard number to reinstall. The problem is following the instructions on that card, we have still been unable to find the link or download. The only thing that seems to

  • How can I list print queues per server via power shell script

    Hello, we are managing many print servers on our domain environment,  now for auditing purpose I need to report print queues per server,  and it seems bit difficult task doing it via GUI in print management view, could someone help me with script whi

  • Lync 2010 Version 4.0.7577.4445 Keeps disconnecting and reconnecting

    Hello,  I have Lync 2010 Version 4.0.7577.4445 Keeps disconnecting and reconnecting. I have checked my network and its on a 100Mbps link, and stable/no errors logs. This occurs randomly every several minutes. I have a wireshark capture if it helps yo

  • Can i load transactional Data from ge DS without having load M Data before

    Hello, I want to load transactional data from a generic data source. I just want to know whether it would be successful, after the master data of 0material i load in the PSA couldn't be loaded in the infoObject (000000XXXXXXX -> material number error