Nvidia Pci system Managment controllers error!!!

In The " system Administrator " of Win XP, appears this dispositive " Nvidia Pci bus system managment " when acces at propertis of them appears " This dispositive nos hace controllers installed ". Anywhere in the list of dispositives appear as valid. What is the problem? Thanks.

There is NO problem .
Many devices don't have spesific drivers . Still they need allocated mem/io range and to register in the pci enumeration
and bus system with vendor id class id and div. other registry settings .
Look through device manager , expand all + for all groups , if you have no devices with yellow "question mark" all is okay .

Similar Messages

NVIDIA nForce System Management Controller: Windows 7 driver?

I have a Fujitsu Siemens PC, Amilo Desktop Pi 3630 A, running Windows Vista Home Premium 32bit,
which I would like to update (preferably without reinstall) to Windows 7.
When I checked Fujitsu's website and also by mail contact, I only got the response
"Your system is not certified for Windows 7"!
So I ran "Microsoft Windows 7 Upgrade Advisor", which said that I can upgrade!
The only issue is that it requires an update to the driver for the
"NVIDIA nForce System Management Controller" [current version is 5.1.2600.158],
but Microsoft directs me to THIS site.
Here I search for a suitable driver for my motherboard, which according the tech spec's is
MB MS-7504PV (or MS-7504VP-PV) with chipset NVIDIA nForce 630i,
but no luck there. The MSI Live Update Online plug-in does not find anything on my Mainboard.
Over at NVIDIA's site I can find a driver for nForce 630i but only paired with GeForce 7xxx,
and I don't think I need a complete motherboard driver package.
Where can I find the correct driver?
Or do I dare try a Windows 7 update anyway?
What can go wrong?
PC: Fujitsu Siemens Amilo Desktop Pi 3630 A
CPU: Intel Core 2 Quad Q8200 2.33GHz
M-board: Fujitsu Siemens / MSI MB MS-7504PV, muATX, v1.1, Socket 775
Chipset: NVIDIA nForce 630i MCP73PV
BIOS: AMI v3.0S
Video: NVIDIA GeForce 9600 GT
LAN: nForce Realtek RTL8211
OS: Windows Vista Home Premium 32bit

You do not have an MSI Retail Product but a mainboard produced exclusively for the OEM Market. Neither MSI nor this forum provides end-user support for OEM products. That is also why MSI Live Update does not find anything for this particular platform (OEM). You need to contact Fujitsu Siemens for assistance (and this include BIOS Updates and drivers).
__TOPIC LOCKED__

OnCommand System Manager recieves error 500

Good day, i am running OnCommand System Manager ver 3.1.1 on Windows. Today, for the very first time, i have seen this issue: i can connect to my 3210 running DataONTAP 8.0.3P2 7-mode, but when i try to reach my new 2240 running DataONTAP 8.1.3P3 7-mode i recieve an error 500 "connection refused". I have found this workaround: on the 2240s i have issued the command >options httpd.admin.enable on ;after this the OnCommand System Manager probably still tries a secure connection, on the console i see errors like [hostname: HTTPPool03:warning]: HTTP XML Authentication failed from MyClientIP .  But now i guess OnCommand System Manager falls back to a non secure connection, i see the question "do you want to set up a secure connection or continue without...", i answer "continue without" and i'm able to manage my filers again. What's happened? Maybe something java updates related? Thanks in advance.
Alessandro

While removing newer version of Java and installing older versions probably fixes this in most cases, do you really want to run version of software that have known vulnerabilities in them? I think that companies like NETAPP, EMC, DELL, HP, etc, etc., need to be accountable for staying current. They need to upgrade the applications regularly to stay compatible with the platforms they develop in. The days of write it once and forget it are long gone. The threat vectors have changed and continue to change on a daily basis. If I had machine that was dedicated to doing nothing other managing storage, network and servers, that never saw any portion of the production network and was isolated 100% from the internet, perhaps leaving archaic versions of depreciated software out there would be an option. The days of doing business this way are also long gone. Cannot speak for everyone of course, but I don’t have the real-estate on my desk and have no desire to run up down the hall to my MDF every time I want to manage something in the environment.

System Management Bus - error

I have MSI845PE MAX and WXP Home edition. In Device Manager ->Other devices is exclamation mark in System Management Bus. What I have do corect this problem. Thanx

Did you try to Disable, and then Renable the device by double clicking on it in Device Manager?..........Sean REILLY875

PCI System Management Bus

I am running Windows 98SE. I have everything up and working, except for one little thing. The PCI Management Bus does not have a drive. My Windows disk has no drivers for it, and have no found anything online. Any and all help is welcome and appreciative.

Sorry, I was typing fast and that just slipped my mind. I'm running RS482M4-ILD board. I actually decided to read forum rules and put my specs in my signature, just like it suggests. Sorry for wasting your time like that. I'll make sure to proofread my posts from now on and make sure I put in all the information

ERROR MESSAGE sap system manager:work process restarted, session terminated

Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors         SYSTEM_CORE_DUMPED
       Occurred on     01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
                                                                                Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
                                                                                Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
           Last error logged in SAP kernel
                                                                                Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
                                                                                2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.

Hi
   follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
<i>pls, award points</i>

Solaris 10 on Sun Ultra 40 --PCI system error on /bus/device/function 0048h

Everytime I boot to Solaris 10 (08/07) I get the following message at the top of my screen:
PCI system error on /bus/device/function 0048h
The system boots up successfully, but I find this error to be particularly annoying. I have no third-party cards plugged into any PCI slot.
Why am I getting this error. Is the BIOS just giving me a bogus error?
Any help would be appreciated.
Thanks.
Robert

Hello,
I even got the same Problem with an Ultra 40. After powering off and on the system during the last 3 days, now i got an error mesage, "CPU3 can not be started"
cleared the CMOS and now i am back on "PCI System Error on Bus/Device/Function 0048h" the system is running with the latest 1.7 Bios update.
First of all I tried to flash the system back to an lower version but the flashsoftware seems not to support this operation have to make own boot media with the flashprogramme and flash by forced the 1.0 or 1.2 version.
regards
Monchichi

TimesTen Error :5126: A system managed cache group cannot contain non-stand

I have created few cache groups in TimesTen.
And when i fired script to create fillowing cache group its gives me error.
please see the details mentioned below.
CREATE USERMANAGED CACHE GROUP C_TBLSSTPACCOUNTINGSUMMARY
AUTOREFRESH MODE INCREMENTAL INTERVAL 5 SECONDS STATE ON
FROM
schema.tablename
ACCOUNTINGSUMMARYID DOUBLE,
INPUTFILENAME VARCHAR(255) NOT NULL,
ACCOUNTINGSTATUS VARCHAR(255) NOT NULL,
RECORDCOUNT DOUBLE,
LASTUPDATEDDATE DATE NOT NULL,
CREATEDATE TIMESTAMP DEFAULT SYSDATE,
PRIMARY KEY (ACCOUNTINGSUMMARYID),
PROPAGATE);
then error occurs like==>
5121: Non-standard type mapping for column JISPRATCORBILLINGDEV501.TBLSSTPACCOUNTINGSUMMARY.ACCOUNTINGSUMMARYID, cache operations are restricted
5126: A system managed cache group cannot contain non-standard column type mapping
The command failed.

If you have access to Oracle Metalink, Please take a look at the Note:367431.1
Regards,
Sabdar Syed.

Error: System.Management.Automation.RemoteException: Federation information could not be received from the external organization.

Greetings.
I'm getting 2 errors and 1 warning in the Hybrid Configuration object:
INFO : Session=Tenant Cmdlet=Get-FederationInformation -DomainName 'SanJuanCiudadPatria.com' -BypassAdditionalDomainValidation: $true START
ERROR : System.Management.Automation.RemoteException: Federation information could not be received from the external organization.
INFO : Session=Tenant Cmdlet=Get-FederationInformation FINISH Time=2620.7003ms
INFO : Session=Tenant Cmdlet=Get-FederationInformation -DomainName 'SanJuanCiudadPatria.com' -BypassAdditionalDomainValidation: $true START
ERROR : System.Management.Automation.RemoteException: Federation information could not be received from the external organization.
INFO : Session=OnPrem Cmdlet=Get-OrganizationConfig START
INFO : Session=OnPrem Cmdlet=Get-OrganizationConfig FINISH Time=203.229ms
WARNING : Office 365 was unable to communicate with your on-premises Autodiscover endpoint. This is typically due to incorrect DNS or firewall configuration. The Office 365 tenant is currently configured to use the following URL for Autodiscover
queries from the Office 365 tenant to the on-premises organization - https://autodiscover.SanJuanCiudadPatria.com/autodiscover/autodiscover.svc/WSSecurity. See the following article for further information: http://go.microsoft.com/fwlink/p/?LinkId=275838
Any help would be greatly appreciated.
Hello World.

Hello,
If the IIS configuration is missing the svc-Integrated handler mapping, the issue may occur. Please try to refer to the following KB to check if the issue can be solved.
http://support.microsoft.com/kb/2626696
Please check if there is A record for autodiscover on public DNS server or DNS SRV record.
Additional blog for your reference.
http://blogs.technet.com/b/mikehall/archive/2013/08/21/office-365-insight-into-the-hybrid-configuration-wizard-part-2.aspx
Cara Chen
TechNet Community Support

PCI-7344 Device status error

MAX returns some errors after PCI-7344 installation with the last NI Motion Driver,
1- Max returns a message: "reset board before update firmware" when I try to update the firmware
2- returns another message: "Restart PC to power supply again the board"
3- When restart PC I obtain two message:
A- NI-PAL Service Manager encountered a problem and needed to close
B- NIMax has encountered a problem and needs to close. We are sorry for the inconvenience
4- Reinstall entire operative System and Driver, Labview and MAX is necessary to obtain a stable function of MAX because these error messages come back after I unistall the PCI-7344 board from PC also. (I use Norton Ghost to restore entire system for my luck)
Thanks for suggestions
Francesco

Assuming NI, the card is a PCI-GPIB.
The error ( Unknown system error (miscellaneous error).), doesn't say much. I would recomend doing the test of the card in MAX and see what happens there. Since MAX does not use VISA for instrument communication, you might have a problem with that though if NI-VISA was not installed at all, you would have a different error code. Is the instrument driver a native LabVIEW driver or are you using an IVI driver? IVI would recquire the IVI Compliance Package installed.

Cisco 7206VXR (NPE-G2) Error - %SW_MGR-3-CM_ERROR_FEATURE_CLASS: Connection Manager Feature Error: Class SSS: (QoS) - install error, ignore.

Dear Cisco Expert,
We are facing problem terminating PPPoE users on Cisco 7206VXR NPE-G2 router where in user connects to router but policy-map is not applying on user interface.
Below mentioned message is logged on router.
%SW_MGR-3-CM_ERROR_FEATURE_CLASS: Connection Manager Feature Error: Class SSS: (QoS) - install error, ignore.
Below is the "show version" output.
Cisco IOS Software, 7200 Software (C7200P-ADVIPSERVICESK9-M), Version 12.2(33)SRC, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Fri 11-Jan-08 02:44 by prod_rel_team
ROM: System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
aggr03 uptime is 1 day, 6 hours, 4 minutes
System returned to ROM by reload at 05:45:18 IST Wed Sep 3 2014
System restarted at 05:46:53 IST Wed Sep 3 2014
System image file is "disk2:c7200p-advipservicesk9-mz.122-33.SRC.bin"
Last reload reason: Reload command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 7206VXR (NPE-G2) processor (revision A) with 1966080K/65536K bytes of memory.
Processor board ID 31782123
MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2
6 slot VXR midplane, Version 2.7
Last reset from power-on
PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.
1 FastEthernet interface
3 Gigabit Ethernet interfaces
2045K bytes of NVRAM.
500472K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
Can somebody help please?
Thanks,
Nilesh.

Hi Inayath,
We are applying policy-map on user virtual-interface via radius attributes.
Cisco-Avpair+="lcp:interface-config#1=service-policy input 256k"
Cisco-Avpair+="lcp:interface-config#2=service-policy output 256k"
Below is the relevant configuration for cisco router.
aggri03#sh policy-map 256k
Policy Map 256k
    Class 256k
     police cir 520000 bc 32000
       conform-action transmit
       exceed-action drop
aggri03#sh run int virtual-te1
Building configuration...
Current configuration : 398 bytes
interface Virtual-Template1
mtu 1492
ip unnumbered Loopback100
no ip redirects
no ip unreachables
no ip proxy-arp
no logging event link-status
peer default ip address pool poolname
no snmp trap link-status
keepalive 60
ppp authentication pap callin
ppp ipcp dns 203.187.x.y 203.187.x.y
ppp timeout ncp 30
ppp timeout authentication 20
ppp timeout idle 480
end
Below is the complete log line on router.
Sep 3 16:41:31: %SW_MGR-3-CM_ERROR_FEATURE_CLASS: Connection Manager Feature Error: Class SSS: (QoS) - install error, ignore.
-Traceback= 4A9C88 4AAC20 4AB350 12B6040 12C8B38 2C2F24C 2C2F2FC 12C8E0C 12C9000 12C94D0 12B4788 12B4D40 12B4E84 12AFEB0 12B02FC
Please let me know if you want further information & thanks for your inputs.
Thanks,
Nilesh.

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Adobe application manager getting error code : A12E6 please what can i do ?

adobe application manager getting error code : A12E6 please what can i do ?

Anass63113494 what Adobe software or service are you attempting to install? Also which operating system are you using?

How to install forms 6i runtime using windows Systems Management Server?

Hi,
Our clinents are using oracle forms 5 application and we want to upgrade to forms 6i ( client /server ).
How to install oracle forms 6i and reports 6i runtime in multiple client machines
using windows systems management server instead of installing one by one manually.
Regards

Here is a quick summary on why this works...
The Problem:
The issue relies with the method and logic that MDT’s scripts use to query and validate that the proper disks, partitions and storage space reside before starting the installation of Windows.
Essentially what you have configured in the Task Sequence and the UNATTEND.xml is analyzed by the MDT scripts then a validation is completed against the hardware in which you wish to install Windows
on and if there are any errors you will be prompted with MDT Error or Warning dialogs.
The problem is that the MDT scripts use WMI to query the hard disk, partition and free space requirements for Windows, but in the case of using GPT disk, the 2nd partition (MSR) that you have to create
is hidden. The class that WMI uses for its query can’t see the MSR partition so instead of 3 partitions, it returns 2 in the query results; hence why DISK 0 PARTITION 3 doesn’t work as mentioned earlier when configured in the MDT Task Sequence.
Although the above still confuses me as to why it works with DISK 0 PARTITION 2 since the WMI query results return PARTITION IDs 0 and 1 when it should return 1 and 2…
The Windows Pre-Installation Environment however does see all 3 partitions correctly and we tried configuring in our Task Sequence to install Windows to DISK 0 and PARTITION 2 and in the UNATTEND.xml
file to install Windows to DISK 0 and PARTITION 3 but due to timing issues of the way Windows installs with MDT, did this not work for us.

N1 system manager installation faied (newer version of Java web console)

Hi,
I am trying to install Sun N1 system manager on Solaris x86 U3 + all patches. Once I run the installer I got:
N1SM Installer (version 1.3.2 on SunOS)
1. Install OS packages. [Completed]
2. Install Expect. [Completed]
3. Install IPMI tool. [Completed]
4. Install JDK 1.5. [Completed]
5. Install service provisioning components. [Completed]
6. Install OS provisioning components. [Completed]
7. Copy DHCP configuration file. [Completed]
8. Install user interface components. [Partially Run]
9. Install service container components. [Not Completed]
10. Install N1 System Manager. [Not Completed]
Failed Step: Install user interface components.
The following is a portion of the installer
log which may indicate the cause of the error.
If this does not indicate the cause of the
error, you will need to view the full log
file. More information on how to do that is
available below.
The Sun Java(TM) Web Console software already installed (version 3.0.2)
is newer than the version (3.0) you are attempting to install.
Downgrading is not supported. If you wish to run the older version,
you can install it after unintalling the currently installed version.
Error running lockhart setup: 1792
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.9327.
t. Try this step again (correct the failure before proceeding)
x. Exit
Enter selection: (t/x) x
Is there any way to continue my installation and using currently installed version of Java Web Console?

Tried removing the currently installed Java Web Console as described at http://docs.sun.com/app/docs/doc/817-1985/6mhm8o5l4?a=view
It says to simply run /usr/share/webconsole/bin/setup -u, however there is no setup binary in the listed dir.
# ls -l /usr/share/webconsole/bin/
total 396
-r-xr-xr-x 1 root sys 9995 Oct 9 08:18 smcwebserver
-r-xr-xr-x 1 root sys 6571 Oct 9 08:17 smloginmodule
-r-xr-xr-x 1 root sys 171907 Oct 9 08:17 smreg
-r-xr-xr-x 1 root sys 1456 Oct 9 08:17 smwebapp
-r-xr-xr-x 1 root sys 2917 Oct 9 08:17 wcadmin
# uname -a
SunOS host 5.10 Generic_118855-33 i86pc i386 i86pc
It seems the docs are wrong?

Nvidia Pci system Managment controllers error!!!

Similar Messages

Maybe you are looking for